[PATCH v2 2/4] dt-bindings: hwlock: qcom: Allow device on mmio bus

[Bjorn Andersson <bjorn.andersson@linaro.org>]

In modern Qualcomm platforms the mutex region of the TCSR is forked off
into its own block, all with a offset of 0 and stride of 4096, and in
some of these platforms no other registers in this region is accessed
from Linux.

Update the binding to allow the hardware block to be described directly
on the mmio bus, in addition to allowing the existing syscon based
definition for backwards compatibility.

Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---

Changes since v1:
- None

 .../bindings/hwlock/qcom-hwspinlock.yaml         | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/hwlock/qcom-hwspinlock.yaml b/Documentation/devicetree/bindings/hwlock/qcom-hwspinlock.yaml
index 71e63b52edd5..88f975837588 100644
--- a/Documentation/devicetree/bindings/hwlock/qcom-hwspinlock.yaml
+++ b/Documentation/devicetree/bindings/hwlock/qcom-hwspinlock.yaml
@@ -19,6 +19,9 @@ properties:
       - qcom,sfpb-mutex
       - qcom,tcsr-mutex
 
+  reg:
+    maxItems: 1
+
   '#hwlock-cells':
     const: 1
 
@@ -31,7 +34,12 @@ properties:
 required:
   - compatible
   - '#hwlock-cells'
-  - syscon
+
+oneOf:
+  - required:
+    - reg
+  - required:
+    - syscon
 
 additionalProperties: false
 
@@ -46,6 +54,12 @@ examples:
                 compatible = "qcom,tcsr-mutex";
                 syscon = <&tcsr_mutex_block 0 0x80>;
 
+                #hwlock-cells = <1>;
+        };
+  - |
+        tcsr_mutex: hwlock@1f40000 {
+                compatible = "qcom,tcsr-mutex";
+                reg = <0x01f40000 0x40000>;
                 #hwlock-cells = <1>;
         };
 ...
-- 
2.26.2