* [PATCH V5 1/9] usb: roles: Introduce stubs for the exiting functions in role.h.
2019-04-24 9:22 [PATCH V5 0/9] Add USB3.0 and TI HD3SS3220 driver support Biju Das
@ 2019-04-24 9:22 ` Biju Das
2019-04-24 9:22 ` [PATCH V5 2/9] usb: roles: add API to get usb_role_switch by node Biju Das
` (7 subsequent siblings)
8 siblings, 0 replies; 13+ messages in thread
From: Biju Das @ 2019-04-24 9:22 UTC (permalink / raw)
To: Greg Kroah-Hartman, Yu Chen
Cc: linux-usb, Heikki Krogerus, Simon Horman, Geert Uytterhoeven,
Chris Paterson, Biju Das, Fabrizio Castro, linux-renesas-soc,
Hans de Goede, Andy Shevchenko, John Stultz
From: Yu Chen <chenyu56@huawei.com>
This patch adds stubs for the exiting functions while
CONFIG_USB_ROLE_SWITCH does not enabled.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Yu Chen <chenyu56@huawei.com>
---
* This is a dependency patch for the next patch in this series
Ref:(https://patchwork.kernel.org/patch/10909971/)
Note:- This patch is added to this series to avoid compilation issues.
---
include/linux/usb/role.h | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/include/linux/usb/role.h b/include/linux/usb/role.h
index c05ffa6..da2b964 100644
--- a/include/linux/usb/role.h
+++ b/include/linux/usb/role.h
@@ -42,6 +42,8 @@ struct usb_role_switch_desc {
bool allow_userspace_control;
};
+
+#if IS_ENABLED(CONFIG_USB_ROLE_SWITCH)
int usb_role_switch_set_role(struct usb_role_switch *sw, enum usb_role role);
enum usb_role usb_role_switch_get_role(struct usb_role_switch *sw);
struct usb_role_switch *usb_role_switch_get(struct device *dev);
@@ -51,5 +53,33 @@ struct usb_role_switch *
usb_role_switch_register(struct device *parent,
const struct usb_role_switch_desc *desc);
void usb_role_switch_unregister(struct usb_role_switch *sw);
+#else
+static inline int usb_role_switch_set_role(struct usb_role_switch *sw,
+ enum usb_role role)
+{
+ return 0;
+}
+
+static inline enum usb_role usb_role_switch_get_role(struct usb_role_switch *sw)
+{
+ return USB_ROLE_NONE;
+}
+
+static inline struct usb_role_switch *usb_role_switch_get(struct device *dev)
+{
+ return ERR_PTR(-ENODEV);
+}
+
+static inline void usb_role_switch_put(struct usb_role_switch *sw) { }
+
+static inline struct usb_role_switch *
+usb_role_switch_register(struct device *parent,
+ const struct usb_role_switch_desc *desc)
+{
+ return ERR_PTR(-ENODEV);
+}
+
+static inline void usb_role_switch_unregister(struct usb_role_switch *sw) { }
+#endif
#endif /* __LINUX_USB_ROLE_H */
--
2.7.4
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH V5 2/9] usb: roles: add API to get usb_role_switch by node
2019-04-24 9:22 [PATCH V5 0/9] Add USB3.0 and TI HD3SS3220 driver support Biju Das
2019-04-24 9:22 ` [PATCH V5 1/9] usb: roles: Introduce stubs for the exiting functions in role.h Biju Das
@ 2019-04-24 9:22 ` Biju Das
2019-04-24 9:22 ` [PATCH V5 3/9] dt-bindings: usb: hd3ss3220 device tree binding document Biju Das
` (6 subsequent siblings)
8 siblings, 0 replies; 13+ messages in thread
From: Biju Das @ 2019-04-24 9:22 UTC (permalink / raw)
To: Matthias Brugger
Cc: Chunfeng Yun, Greg Kroah-Hartman, Heikki Krogerus, Hans de Goede,
Andy Shevchenko, Jun Li, linux-usb, linux-arm-kernel,
linux-mediatek, Simon Horman, Geert Uytterhoeven, Chris Paterson,
Biju Das, Fabrizio Castro, linux-renesas-soc
From: Chunfeng Yun <chunfeng.yun@mediatek.com>
Add fwnode_usb_role_switch_get() to make easier to get
usb_role_switch by fwnode which register it.
It's useful when there is not device_connection registered
between two drivers and only knows the fwnode which register
usb_role_switch.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
---
* Rebased on top of patch1 in this series. Incorporated Heikki's review comments
(https://patchwork.kernel.org/patch/10882555/)
Note:- This patch is added to this series to avoid compilation issues.
---
drivers/usb/roles/class.c | 25 +++++++++++++++++++++++++
include/linux/usb/role.h | 8 ++++++++
2 files changed, 33 insertions(+)
diff --git a/drivers/usb/roles/class.c b/drivers/usb/roles/class.c
index f45d8df..a0847a8 100644
--- a/drivers/usb/roles/class.c
+++ b/drivers/usb/roles/class.c
@@ -136,6 +136,31 @@ struct usb_role_switch *usb_role_switch_get(struct device *dev)
EXPORT_SYMBOL_GPL(usb_role_switch_get);
/**
+ * fwnode_usb_role_switch_get - Find USB role switch by it's parent fwnode
+ * @fwnode: The fwnode that register USB role switch
+ *
+ * Finds and returns role switch registered by @fwnode. The reference count
+ * for the found switch is incremented.
+ */
+struct usb_role_switch *
+fwnode_usb_role_switch_get(struct fwnode_handle *fwnode)
+{
+ struct usb_role_switch *sw;
+ struct device *dev;
+
+ dev = class_find_device(role_class, NULL, fwnode,
+ switch_fwnode_match);
+ if (!dev)
+ return ERR_PTR(-EPROBE_DEFER);
+
+ sw = to_role_switch(dev);
+ WARN_ON(!try_module_get(sw->dev.parent->driver->owner));
+
+ return sw;
+}
+EXPORT_SYMBOL_GPL(fwnode_usb_role_switch_get);
+
+/**
* usb_role_switch_put - Release handle to a switch
* @sw: USB Role Switch
*
diff --git a/include/linux/usb/role.h b/include/linux/usb/role.h
index da2b964..0f6e2829 100644
--- a/include/linux/usb/role.h
+++ b/include/linux/usb/role.h
@@ -47,6 +47,8 @@ struct usb_role_switch_desc {
int usb_role_switch_set_role(struct usb_role_switch *sw, enum usb_role role);
enum usb_role usb_role_switch_get_role(struct usb_role_switch *sw);
struct usb_role_switch *usb_role_switch_get(struct device *dev);
+struct usb_role_switch *
+fwnode_usb_role_switch_get(struct fwnode_handle *fwnode);
void usb_role_switch_put(struct usb_role_switch *sw);
struct usb_role_switch *
@@ -70,6 +72,12 @@ static inline struct usb_role_switch *usb_role_switch_get(struct device *dev)
return ERR_PTR(-ENODEV);
}
+struct usb_role_switch *
+fwnode_usb_role_switch_get(struct fwnode_handle *fwnode)
+{
+ return ERR_PTR(-ENODEV);
+}
+
static inline void usb_role_switch_put(struct usb_role_switch *sw) { }
static inline struct usb_role_switch *
--
2.7.4
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH V5 3/9] dt-bindings: usb: hd3ss3220 device tree binding document
2019-04-24 9:22 [PATCH V5 0/9] Add USB3.0 and TI HD3SS3220 driver support Biju Das
2019-04-24 9:22 ` [PATCH V5 1/9] usb: roles: Introduce stubs for the exiting functions in role.h Biju Das
2019-04-24 9:22 ` [PATCH V5 2/9] usb: roles: add API to get usb_role_switch by node Biju Das
@ 2019-04-24 9:22 ` Biju Das
2019-04-24 9:22 ` [PATCH V5 4/9] dt-bindings: usb: renesas_usb3: Add renesas,usb-role-switch property Biju Das
` (5 subsequent siblings)
8 siblings, 0 replies; 13+ messages in thread
From: Biju Das @ 2019-04-24 9:22 UTC (permalink / raw)
To: Rob Herring, Mark Rutland
Cc: Biju Das, Greg Kroah-Hartman, Heikki Krogerus, Felipe Balbi,
linux-usb, devicetree, Simon Horman, Yoshihiro Shimoda,
Geert Uytterhoeven, Chris Paterson, Fabrizio Castro,
linux-renesas-soc
Add device tree binding document for TI HD3SS3220 Type-C DRP port
controller driver.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
V4-->V5
* No Change.
V3-->V4
* No Change.
V2-->V3
* Added Rob's Reviewed by tag.
V1-->V2
* Added connector node.
* updated the example with connector node.
---
.../devicetree/bindings/usb/ti,hd3ss3220.txt | 37 ++++++++++++++++++++++
1 file changed, 37 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt
diff --git a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt
new file mode 100644
index 0000000..7f41400
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt
@@ -0,0 +1,37 @@
+TI HD3SS3220 TypeC DRP Port Controller.
+
+Required properties:
+ - compatible: Must be "ti,hd3ss3220".
+ - reg: I2C slave address, must be 0x47 or 0x67 based on ADDR pin.
+ - interrupts: <a b> where a is the interrupt number and b represents an
+ encoding of the sense and level information for the interrupt.
+
+Required sub-node:
+ - connector : The "usb-c-connector" attached to the hd3ss3220 chip. The
+ bindings of the connector node are specified in:
+
+ Documentation/devicetree/bindings/connector/usb-connector.txt
+
+Example:
+hd3ss3220@47 {
+ compatible = "ti,hd3ss3220";
+ reg = <0x47>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+ usb_con: connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+ data-role = "dual";
+ };
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hd3ss3220_ep: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&usb3peri_role_switch>;
+ };
+ };
+};
--
2.7.4
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH V5 4/9] dt-bindings: usb: renesas_usb3: Add renesas,usb-role-switch property
2019-04-24 9:22 [PATCH V5 0/9] Add USB3.0 and TI HD3SS3220 driver support Biju Das
` (2 preceding siblings ...)
2019-04-24 9:22 ` [PATCH V5 3/9] dt-bindings: usb: hd3ss3220 device tree binding document Biju Das
@ 2019-04-24 9:22 ` Biju Das
2019-04-26 18:14 ` Rob Herring
2019-04-24 9:22 ` [PATCH V5 5/9] usb: typec: driver for TI HD3SS3220 USB Type-C DRP port controller Biju Das
` (4 subsequent siblings)
8 siblings, 1 reply; 13+ messages in thread
From: Biju Das @ 2019-04-24 9:22 UTC (permalink / raw)
To: Rob Herring, Mark Rutland
Cc: Biju Das, Greg Kroah-Hartman, Heikki Krogerus, Felipe Balbi,
linux-usb, devicetree, Simon Horman, Yoshihiro Shimoda,
Geert Uytterhoeven, Chris Paterson, Fabrizio Castro,
linux-renesas-soc
Add an optional property renesas,usb-role-switch to support
dual role switch for USB Type-C DRP port controller devices
using USB role switch class framework.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
---
V4-->V5
* No Change
V3-->V4
* No Change
V2-->V3
* Added optional renesas,usb-role-switch property.
V1-->V2
* Added usb-role-switch-property
* Updated the example with usb-role-switch property.
---
.../devicetree/bindings/usb/renesas_usb3.txt | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/renesas_usb3.txt b/Documentation/devicetree/bindings/usb/renesas_usb3.txt
index 35039e7..f1cb06a 100644
--- a/Documentation/devicetree/bindings/usb/renesas_usb3.txt
+++ b/Documentation/devicetree/bindings/usb/renesas_usb3.txt
@@ -22,6 +22,7 @@ Required properties:
Optional properties:
- phys: phandle + phy specifier pair
- phy-names: must be "usb"
+ - renesas,usb-role-switch: use USB role switch to handle role switch events
Example of R-Car H3 ES1.x:
usb3_peri0: usb@ee020000 {
@@ -39,3 +40,24 @@ Example of R-Car H3 ES1.x:
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 327>;
};
+
+Example of RZ/G2E:
+ usb3_peri0: usb@ee020000 {
+ compatible = "renesas,r8a774c0-usb3-peri",
+ "renesas,rcar-gen3-usb3-peri";
+ reg = <0 0xee020000 0 0x400>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 328>;
+ companion = <&xhci0>;
+ renesas,usb-role-switch;
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb3peri_role_switch: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&hd3ss3220_ep>;
+ };
+ };
+ };
--
2.7.4
^ permalink raw reply related [flat|nested] 13+ messages in thread
* Re: [PATCH V5 4/9] dt-bindings: usb: renesas_usb3: Add renesas,usb-role-switch property
2019-04-24 9:22 ` [PATCH V5 4/9] dt-bindings: usb: renesas_usb3: Add renesas,usb-role-switch property Biju Das
@ 2019-04-26 18:14 ` Rob Herring
2019-04-29 9:39 ` Biju Das
0 siblings, 1 reply; 13+ messages in thread
From: Rob Herring @ 2019-04-26 18:14 UTC (permalink / raw)
To: Biju Das
Cc: Mark Rutland, Greg Kroah-Hartman, Heikki Krogerus, Felipe Balbi,
linux-usb, devicetree, Simon Horman, Yoshihiro Shimoda,
Geert Uytterhoeven, Chris Paterson, Fabrizio Castro,
linux-renesas-soc
On Wed, Apr 24, 2019 at 10:22:18AM +0100, Biju Das wrote:
> Add an optional property renesas,usb-role-switch to support
> dual role switch for USB Type-C DRP port controller devices
> using USB role switch class framework.
>
> Signed-off-by: Biju Das <biju.das@bp.renesas.com>
> ---
> V4-->V5
> * No Change
> V3-->V4
> * No Change
> V2-->V3
> * Added optional renesas,usb-role-switch property.
> V1-->V2
> * Added usb-role-switch-property
> * Updated the example with usb-role-switch property.
> ---
> .../devicetree/bindings/usb/renesas_usb3.txt | 22 ++++++++++++++++++++++
> 1 file changed, 22 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/usb/renesas_usb3.txt b/Documentation/devicetree/bindings/usb/renesas_usb3.txt
> index 35039e7..f1cb06a 100644
> --- a/Documentation/devicetree/bindings/usb/renesas_usb3.txt
> +++ b/Documentation/devicetree/bindings/usb/renesas_usb3.txt
> @@ -22,6 +22,7 @@ Required properties:
> Optional properties:
> - phys: phandle + phy specifier pair
> - phy-names: must be "usb"
> + - renesas,usb-role-switch: use USB role switch to handle role switch events
Mediatek and HiSilicon both have same or similar properties in patches
under review. Please coordinate and document a common property.
Really, I'm wondering why this is needed. Can't you walk the graph to
the connector and determine if dual role is supported by the connector
type?
Rob
^ permalink raw reply [flat|nested] 13+ messages in thread
* RE: [PATCH V5 4/9] dt-bindings: usb: renesas_usb3: Add renesas,usb-role-switch property
2019-04-26 18:14 ` Rob Herring
@ 2019-04-29 9:39 ` Biju Das
2019-05-03 6:39 ` Biju Das
0 siblings, 1 reply; 13+ messages in thread
From: Biju Das @ 2019-04-29 9:39 UTC (permalink / raw)
To: Rob Herring
Cc: Mark Rutland, Greg Kroah-Hartman, Heikki Krogerus, Felipe Balbi,
linux-usb, devicetree, Simon Horman, Yoshihiro Shimoda,
Geert Uytterhoeven, Chris Paterson, Fabrizio Castro,
linux-renesas-soc, Chunfeng Yun, Yu Chen
Hi Rob,
Thanks for the feedback.
> Subject: Re: [PATCH V5 4/9] dt-bindings: usb: renesas_usb3: Add
> renesas,usb-role-switch property
>
> On Wed, Apr 24, 2019 at 10:22:18AM +0100, Biju Das wrote:
> > Add an optional property renesas,usb-role-switch to support dual role
> > switch for USB Type-C DRP port controller devices using USB role
> > switch class framework.
> >
> > Signed-off-by: Biju Das <biju.das@bp.renesas.com>
> > ---
> > V4-->V5
> > * No Change
> > V3-->V4
> > * No Change
> > V2-->V3
> > * Added optional renesas,usb-role-switch property.
> > V1-->V2
> > * Added usb-role-switch-property
> > * Updated the example with usb-role-switch property.
> > ---
> > .../devicetree/bindings/usb/renesas_usb3.txt | 22
> ++++++++++++++++++++++
> > 1 file changed, 22 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/usb/renesas_usb3.txt
> > b/Documentation/devicetree/bindings/usb/renesas_usb3.txt
> > index 35039e7..f1cb06a 100644
> > --- a/Documentation/devicetree/bindings/usb/renesas_usb3.txt
> > +++ b/Documentation/devicetree/bindings/usb/renesas_usb3.txt
> > @@ -22,6 +22,7 @@ Required properties:
> > Optional properties:
> > - phys: phandle + phy specifier pair
> > - phy-names: must be "usb"
> > + - renesas,usb-role-switch: use USB role switch to handle role
> > + switch events
>
> Mediatek and HiSilicon both have same or similar properties in patches under
> review. Please coordinate and document a common property.
As per R-Car Gen3 boards design. The USB3.0 port on the boards (Salvator-xs and Ebisu) has a USB3.0 Type-A receptor.
For debug purpose , the same port can be used as peripheral using force_b_device mode on debugfs.
Ie, we can use force_b_device to switch the role on this boards.
Where as RZ/G2E board is having USB 3.0 type-C connector. So the driver needs to know whether to use debugfs based
dual role switch or non-debugfs based dual role switch(type-C). That is the reason I have added this property.
> Really, I'm wondering why this is needed. Can't you walk the graph to the
> connector and determine if dual role is supported by the connector type?
Yes, Basically we don't need this property. I could walk through the graph and determine
the role supported by connector type
Please find the example code which will be used in the driver.
+static bool is_ext_dual_role_usb_connector_available(struct device *dev)
+{
+ struct device_node *np = dev->of_node;
+ struct device_node *parent;
+ struct device_node *child;
+ bool ret = false;
+ const char *role_type = NULL;
+
+ child = of_graph_get_endpoint_by_regs(np, -1, -1);
+ if (!child)
+ return ret;
+
+ parent = of_graph_get_remote_port_parent(child);
+ of_node_put(child);
+ child = of_get_child_by_name(parent, "connector");
+ of_node_put(parent);
+ if (!child)
+ return ret;
+
+ if (of_device_is_compatible(child, "usb-c-connector")) {
+ of_property_read_string(child, "data-role", &role_type);
+ if (role_type && (!strncmp(role_type, "dual", strlen("dual"))))
+ ret = true;
+ }
+
+ of_node_put(child);
+ return ret;
+}
Regards,
Biju
^ permalink raw reply [flat|nested] 13+ messages in thread
* RE: [PATCH V5 4/9] dt-bindings: usb: renesas_usb3: Add renesas,usb-role-switch property
2019-04-29 9:39 ` Biju Das
@ 2019-05-03 6:39 ` Biju Das
0 siblings, 0 replies; 13+ messages in thread
From: Biju Das @ 2019-05-03 6:39 UTC (permalink / raw)
To: Rob Herring
Cc: Mark Rutland, Greg Kroah-Hartman, Heikki Krogerus, Felipe Balbi,
linux-usb, devicetree, Simon Horman, Yoshihiro Shimoda,
Geert Uytterhoeven, Chris Paterson, Fabrizio Castro,
linux-renesas-soc, Chunfeng Yun, Yu Chen
Hi Rob,
> Subject: RE: [PATCH V5 4/9] dt-bindings: usb: renesas_usb3: Add
> renesas,usb-role-switch property
> > On Wed, Apr 24, 2019 at 10:22:18AM +0100, Biju Das wrote:
> > > Add an optional property renesas,usb-role-switch to support dual
> > > role switch for USB Type-C DRP port controller devices using USB
> > > role switch class framework.
> > >
> > > Signed-off-by: Biju Das <biju.das@bp.renesas.com>
> > > ---
> > > V4-->V5
> > > * No Change
> > > V3-->V4
> > > * No Change
> > > V2-->V3
> > > * Added optional renesas,usb-role-switch property.
> > > V1-->V2
> > > * Added usb-role-switch-property
> > > * Updated the example with usb-role-switch property.
> > > ---
> > > .../devicetree/bindings/usb/renesas_usb3.txt | 22
> > ++++++++++++++++++++++
> > > 1 file changed, 22 insertions(+)
> > >
> > > diff --git a/Documentation/devicetree/bindings/usb/renesas_usb3.txt
> > > b/Documentation/devicetree/bindings/usb/renesas_usb3.txt
> > > index 35039e7..f1cb06a 100644
> > > --- a/Documentation/devicetree/bindings/usb/renesas_usb3.txt
> > > +++ b/Documentation/devicetree/bindings/usb/renesas_usb3.txt
> > > @@ -22,6 +22,7 @@ Required properties:
> > > Optional properties:
> > > - phys: phandle + phy specifier pair
> > > - phy-names: must be "usb"
> > > + - renesas,usb-role-switch: use USB role switch to handle role
> > > + switch events
> >
> > Mediatek and HiSilicon both have same or similar properties in patches
> > under review. Please coordinate and document a common property.
>
> As per R-Car Gen3 boards design. The USB3.0 port on the boards (Salvator-xs
> and Ebisu) has a USB3.0 Type-A receptor.
> For debug purpose , the same port can be used as peripheral using
> force_b_device mode on debugfs.
> Ie, we can use force_b_device to switch the role on this boards.
>
> Where as RZ/G2E board is having USB 3.0 type-C connector. So the driver
> needs to know whether to use debugfs based dual role switch or non-
> debugfs based dual role switch(type-C). That is the reason I have added this
> property.
>
> > Really, I'm wondering why this is needed. Can't you walk the graph to
> > the connector and determine if dual role is supported by the connector
> type?
>
> Yes, Basically we don't need this property. I could walk through the graph and
> determine the role supported by connector type
>
> Please find the example code which will be used in the driver.
>
> +static bool is_ext_dual_role_usb_connector_available(struct device
> +*dev) {
> + struct device_node *np = dev->of_node;
> + struct device_node *parent;
> + struct device_node *child;
> + bool ret = false;
> + const char *role_type = NULL;
> +
> + child = of_graph_get_endpoint_by_regs(np, -1, -1);
> + if (!child)
> + return ret;
> +
> + parent = of_graph_get_remote_port_parent(child);
> + of_node_put(child);
> + child = of_get_child_by_name(parent, "connector");
> + of_node_put(parent);
> + if (!child)
> + return ret;
> +
> + if (of_device_is_compatible(child, "usb-c-connector")) {
> + of_property_read_string(child, "data-role", &role_type);
> + if (role_type && (!strncmp(role_type, "dual", strlen("dual"))))
> + ret = true;
> + }
> +
> + of_node_put(child);
> + return ret;
> +}
Since we are introducing "usb-role-switch " common property[1],
I feel using the common-property make things simpler compared to walking through the graph.
Are you happy with using the common property? Or still prefer walk through the graph solution?
Please let me know.
[1] https://patchwork.kernel.org/patch/10920909/
Regards,
Biju
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH V5 5/9] usb: typec: driver for TI HD3SS3220 USB Type-C DRP port controller
2019-04-24 9:22 [PATCH V5 0/9] Add USB3.0 and TI HD3SS3220 driver support Biju Das
` (3 preceding siblings ...)
2019-04-24 9:22 ` [PATCH V5 4/9] dt-bindings: usb: renesas_usb3: Add renesas,usb-role-switch property Biju Das
@ 2019-04-24 9:22 ` Biju Das
2019-04-24 9:22 ` [PATCH V5 6/9] usb: gadget: udc: renesas_usb3: Use usb_role_switch framework Biju Das
` (3 subsequent siblings)
8 siblings, 0 replies; 13+ messages in thread
From: Biju Das @ 2019-04-24 9:22 UTC (permalink / raw)
To: Heikki Krogerus, Matthias Brugger
Cc: Biju Das, Greg Kroah-Hartman, Felipe Balbi, Chunfeng Yun,
linux-usb, Simon Horman, Yoshihiro Shimoda, Geert Uytterhoeven,
Chris Paterson, Fabrizio Castro, linux-renesas-soc
Driver for TI HD3SS3220 USB Type-C DRP port controller.
The driver currently registers the port and supports data role swapping.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
---
V4-->V5
* Incorporated Heikki's review comment
(https://patchwork.kernel.org/patch/10902531/)
* Added Heikki's Reviewed-by tag
V3-->V4
* Incorporated Chunfeng Yun's review comment
* Used fwnode API's to get usb role switch handle.
V2-->V3
* Used the new api "usb_role_switch by node" for getting
remote endpoint associated with Type-C USB DRP port
controller devices.
V1-->V2
* Driver uses usb role class instead of extcon for dual role switch
and also handles connect/disconnect events.
---
drivers/usb/typec/Kconfig | 10 ++
drivers/usb/typec/Makefile | 1 +
drivers/usb/typec/hd3ss3220.c | 263 ++++++++++++++++++++++++++++++++++++++++++
3 files changed, 274 insertions(+)
create mode 100644 drivers/usb/typec/hd3ss3220.c
diff --git a/drivers/usb/typec/Kconfig b/drivers/usb/typec/Kconfig
index 89d9193..92a3717 100644
--- a/drivers/usb/typec/Kconfig
+++ b/drivers/usb/typec/Kconfig
@@ -50,6 +50,16 @@ source "drivers/usb/typec/tcpm/Kconfig"
source "drivers/usb/typec/ucsi/Kconfig"
+config TYPEC_HD3SS3220
+ tristate "TI HD3SS3220 Type-C DRP Port controller driver"
+ depends on I2C
+ help
+ Say Y or M here if your system has TI HD3SS3220 Type-C DRP Port
+ controller driver.
+
+ If you choose to build this driver as a dynamically linked module, the
+ module will be called hd3ss3220.ko.
+
config TYPEC_TPS6598X
tristate "TI TPS6598x USB Power Delivery controller driver"
depends on I2C
diff --git a/drivers/usb/typec/Makefile b/drivers/usb/typec/Makefile
index 6696b72..7753a5c3 100644
--- a/drivers/usb/typec/Makefile
+++ b/drivers/usb/typec/Makefile
@@ -4,5 +4,6 @@ typec-y := class.o mux.o bus.o
obj-$(CONFIG_TYPEC) += altmodes/
obj-$(CONFIG_TYPEC_TCPM) += tcpm/
obj-$(CONFIG_TYPEC_UCSI) += ucsi/
+obj-$(CONFIG_TYPEC_HD3SS3220) += hd3ss3220.o
obj-$(CONFIG_TYPEC_TPS6598X) += tps6598x.o
obj-$(CONFIG_TYPEC) += mux/
diff --git a/drivers/usb/typec/hd3ss3220.c b/drivers/usb/typec/hd3ss3220.c
new file mode 100644
index 0000000..7ef7e85
--- /dev/null
+++ b/drivers/usb/typec/hd3ss3220.c
@@ -0,0 +1,263 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * TI HD3SS3220 Type-C DRP Port Controller Driver
+ *
+ * Copyright (C) 2019 Renesas Electronics Corp.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/usb/role.h>
+#include <linux/irqreturn.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/usb/typec.h>
+#include <linux/delay.h>
+
+#define HD3SS3220_REG_CN_STAT_CTRL 0x09
+#define HD3SS3220_REG_GEN_CTRL 0x0A
+#define HD3SS3220_REG_DEV_REV 0xA0
+
+/* Register HD3SS3220_REG_CN_STAT_CTRL*/
+#define HD3SS3220_REG_CN_STAT_CTRL_ATTACHED_STATE_MASK (BIT(7) | BIT(6))
+#define HD3SS3220_REG_CN_STAT_CTRL_AS_DFP BIT(6)
+#define HD3SS3220_REG_CN_STAT_CTRL_AS_UFP BIT(7)
+#define HD3SS3220_REG_CN_STAT_CTRL_TO_ACCESSORY (BIT(7) | BIT(6))
+#define HD3SS3220_REG_CN_STAT_CTRL_INT_STATUS BIT(4)
+
+/* Register HD3SS3220_REG_GEN_CTRL*/
+#define HD3SS3220_REG_GEN_CTRL_SRC_PREF_MASK (BIT(2) | BIT(1))
+#define HD3SS3220_REG_GEN_CTRL_SRC_PREF_DRP_DEFAULT 0x00
+#define HD3SS3220_REG_GEN_CTRL_SRC_PREF_DRP_TRY_SNK BIT(1)
+#define HD3SS3220_REG_GEN_CTRL_SRC_PREF_DRP_TRY_SRC (BIT(2) | BIT(1))
+
+struct hd3ss3220 {
+ struct device *dev;
+ struct regmap *regmap;
+ struct usb_role_switch *role_sw;
+ struct typec_port *port;
+ struct typec_capability typec_cap;
+};
+
+static int hd3ss3220_set_source_pref(struct hd3ss3220 *hd3ss3220, int src_pref)
+{
+ return regmap_update_bits(hd3ss3220->regmap, HD3SS3220_REG_GEN_CTRL,
+ HD3SS3220_REG_GEN_CTRL_SRC_PREF_MASK,
+ src_pref);
+}
+
+static enum usb_role hd3ss3220_get_attached_state(struct hd3ss3220 *hd3ss3220)
+{
+ unsigned int reg_val;
+ enum usb_role attached_state;
+ int ret;
+
+ ret = regmap_read(hd3ss3220->regmap, HD3SS3220_REG_CN_STAT_CTRL,
+ ®_val);
+ if (ret < 0)
+ return ret;
+
+ switch (reg_val & HD3SS3220_REG_CN_STAT_CTRL_ATTACHED_STATE_MASK) {
+ case HD3SS3220_REG_CN_STAT_CTRL_AS_DFP:
+ attached_state = USB_ROLE_HOST;
+ break;
+ case HD3SS3220_REG_CN_STAT_CTRL_AS_UFP:
+ attached_state = USB_ROLE_DEVICE;
+ break;
+ default:
+ attached_state = USB_ROLE_NONE;
+ break;
+ }
+
+ return attached_state;
+}
+
+static int hd3ss3220_dr_set(const struct typec_capability *cap,
+ enum typec_data_role role)
+{
+ struct hd3ss3220 *hd3ss3220 = container_of(cap, struct hd3ss3220,
+ typec_cap);
+ enum usb_role role_val;
+ int pref, ret = 0;
+
+ if (role == TYPEC_HOST) {
+ role_val = USB_ROLE_HOST;
+ pref = HD3SS3220_REG_GEN_CTRL_SRC_PREF_DRP_TRY_SRC;
+ } else {
+ role_val = USB_ROLE_DEVICE;
+ pref = HD3SS3220_REG_GEN_CTRL_SRC_PREF_DRP_TRY_SNK;
+ }
+
+ ret = hd3ss3220_set_source_pref(hd3ss3220, pref);
+ usleep_range(10, 100);
+
+ usb_role_switch_set_role(hd3ss3220->role_sw, role_val);
+ typec_set_data_role(hd3ss3220->port, role);
+
+ return ret;
+}
+
+static void hd3ss3220_set_role(struct hd3ss3220 *hd3ss3220)
+{
+ enum usb_role role_state = hd3ss3220_get_attached_state(hd3ss3220);
+
+ usb_role_switch_set_role(hd3ss3220->role_sw, role_state);
+ if (role_state == USB_ROLE_NONE)
+ hd3ss3220_set_source_pref(hd3ss3220,
+ HD3SS3220_REG_GEN_CTRL_SRC_PREF_DRP_DEFAULT);
+
+ switch (role_state) {
+ case USB_ROLE_HOST:
+ typec_set_data_role(hd3ss3220->port, TYPEC_HOST);
+ break;
+ case USB_ROLE_DEVICE:
+ typec_set_data_role(hd3ss3220->port, TYPEC_DEVICE);
+ break;
+ default:
+ break;
+ }
+}
+
+irqreturn_t hd3ss3220_irq(struct hd3ss3220 *hd3ss3220)
+{
+ int err;
+
+ hd3ss3220_set_role(hd3ss3220);
+ err = regmap_update_bits_base(hd3ss3220->regmap,
+ HD3SS3220_REG_CN_STAT_CTRL,
+ HD3SS3220_REG_CN_STAT_CTRL_INT_STATUS,
+ HD3SS3220_REG_CN_STAT_CTRL_INT_STATUS,
+ NULL, false, true);
+ if (err < 0)
+ return IRQ_NONE;
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t hd3ss3220_irq_handler(int irq, void *data)
+{
+ struct i2c_client *client = to_i2c_client(data);
+ struct hd3ss3220 *hd3ss3220 = i2c_get_clientdata(client);
+
+ return hd3ss3220_irq(hd3ss3220);
+}
+
+static const struct regmap_config config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = 0x0A,
+};
+
+static int hd3ss3220_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct hd3ss3220 *hd3ss3220;
+ struct fwnode_handle *parent, *child;
+ int ret;
+ unsigned int data;
+
+ hd3ss3220 = devm_kzalloc(&client->dev, sizeof(struct hd3ss3220),
+ GFP_KERNEL);
+ if (!hd3ss3220)
+ return -ENOMEM;
+
+ i2c_set_clientdata(client, hd3ss3220);
+
+ hd3ss3220->dev = &client->dev;
+ hd3ss3220->regmap = devm_regmap_init_i2c(client, &config);
+ if (IS_ERR(hd3ss3220->regmap))
+ return PTR_ERR(hd3ss3220->regmap);
+
+ hd3ss3220_set_source_pref(hd3ss3220,
+ HD3SS3220_REG_GEN_CTRL_SRC_PREF_DRP_DEFAULT);
+ child = fwnode_graph_get_next_endpoint(dev_fwnode(hd3ss3220->dev),
+ NULL);
+ parent = fwnode_graph_get_remote_port_parent(child);
+ hd3ss3220->role_sw = fwnode_usb_role_switch_get(parent);
+ if (IS_ERR_OR_NULL(hd3ss3220->role_sw)) {
+ fwnode_handle_put(child);
+ fwnode_handle_put(parent);
+ return PTR_ERR(hd3ss3220->role_sw);
+ }
+
+ fwnode_handle_put(child);
+ fwnode_handle_put(parent);
+
+ hd3ss3220->typec_cap.prefer_role = TYPEC_NO_PREFERRED_ROLE;
+ hd3ss3220->typec_cap.dr_set = hd3ss3220_dr_set;
+ hd3ss3220->typec_cap.type = TYPEC_PORT_DRP;
+ hd3ss3220->typec_cap.data = TYPEC_PORT_DRD;
+
+ hd3ss3220->port = typec_register_port(&client->dev,
+ &hd3ss3220->typec_cap);
+ if (IS_ERR(hd3ss3220->port))
+ return PTR_ERR(hd3ss3220->port);
+
+ hd3ss3220_set_role(hd3ss3220);
+ ret = regmap_read(hd3ss3220->regmap, HD3SS3220_REG_CN_STAT_CTRL, &data);
+ if (ret < 0)
+ goto error;
+
+ if (data & HD3SS3220_REG_CN_STAT_CTRL_INT_STATUS) {
+ ret = regmap_write(hd3ss3220->regmap,
+ HD3SS3220_REG_CN_STAT_CTRL,
+ data | HD3SS3220_REG_CN_STAT_CTRL_INT_STATUS);
+ if (ret < 0)
+ goto error;
+ }
+
+ if (client->irq > 0) {
+ ret = devm_request_threaded_irq(&client->dev, client->irq, NULL,
+ hd3ss3220_irq_handler,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ "hd3ss3220", &client->dev);
+ if (ret)
+ goto error;
+ }
+
+ ret = i2c_smbus_read_byte_data(client, HD3SS3220_REG_DEV_REV);
+ if (ret < 0)
+ goto error;
+
+ dev_info(&client->dev, "probed revision=0x%x\n", ret);
+
+ return 0;
+error:
+ typec_unregister_port(hd3ss3220->port);
+ usb_role_switch_put(hd3ss3220->role_sw);
+
+ return ret;
+}
+
+static int hd3ss3220_remove(struct i2c_client *client)
+{
+ struct hd3ss3220 *hd3ss3220 = i2c_get_clientdata(client);
+
+ typec_unregister_port(hd3ss3220->port);
+ usb_role_switch_put(hd3ss3220->role_sw);
+
+ return 0;
+}
+
+static const struct of_device_id dev_ids[] = {
+ { .compatible = "ti,hd3ss3220"},
+ {}
+};
+MODULE_DEVICE_TABLE(of, dev_ids);
+
+static struct i2c_driver hd3ss3220_driver = {
+ .driver = {
+ .name = "hd3ss3220",
+ .of_match_table = of_match_ptr(dev_ids),
+ },
+ .probe = hd3ss3220_probe,
+ .remove = hd3ss3220_remove,
+};
+
+module_i2c_driver(hd3ss3220_driver);
+
+MODULE_AUTHOR("Biju Das <biju.das@bp.renesas.com>");
+MODULE_DESCRIPTION("TI HD3SS3220 DRP Port Controller Driver");
+MODULE_LICENSE("GPL");
--
2.7.4
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH V5 6/9] usb: gadget: udc: renesas_usb3: Use usb_role_switch framework
2019-04-24 9:22 [PATCH V5 0/9] Add USB3.0 and TI HD3SS3220 driver support Biju Das
` (4 preceding siblings ...)
2019-04-24 9:22 ` [PATCH V5 5/9] usb: typec: driver for TI HD3SS3220 USB Type-C DRP port controller Biju Das
@ 2019-04-24 9:22 ` Biju Das
2019-04-24 9:22 ` [PATCH V5 7/9] arm64: defconfig: enable TYPEC_HD3SS3220 config option Biju Das
` (2 subsequent siblings)
8 siblings, 0 replies; 13+ messages in thread
From: Biju Das @ 2019-04-24 9:22 UTC (permalink / raw)
To: Felipe Balbi, Yoshihiro Shimoda
Cc: Biju Das, Greg Kroah-Hartman, Heikki Krogerus, Simon Horman,
Fabrizio Castro, Kees Cook, linux-usb, Simon Horman,
Geert Uytterhoeven, Chris Paterson, linux-renesas-soc
RZ/G2E cat874 board is capable of detecting cable connect and disconnect
events. Add support for renesas_usb3 to receive connect and disconnect
events and support dual-role switch using usb-role-switch framework.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
---
V4-->V5
* Incorporated Shimoda-san's review comment
(https://patchwork.kernel.org/patch/10902537/)
V3-->V4
* No Change
V2-->V3
* Incorporated Shimoda-san's review comment
(https://patchwork.kernel.org/patch/10852507/)
* Used renesas,usb-role-switch property for differentiating USB
role switch associated with Type-C port controller driver.
V1-->V2
* Driver uses usb role clas for handling dual role switch and handling
connect/disconnect events instead of extcon.
---
drivers/usb/gadget/udc/renesas_usb3.c | 92 ++++++++++++++++++++++++++++++++---
1 file changed, 85 insertions(+), 7 deletions(-)
diff --git a/drivers/usb/gadget/udc/renesas_usb3.c b/drivers/usb/gadget/udc/renesas_usb3.c
index 7dc2485..230f5a5 100644
--- a/drivers/usb/gadget/udc/renesas_usb3.c
+++ b/drivers/usb/gadget/udc/renesas_usb3.c
@@ -351,6 +351,8 @@ struct renesas_usb3 {
int disabled_count;
struct usb_request *ep0_req;
+
+ enum usb_role connection_state;
u16 test_mode;
u8 ep0_buf[USB3_EP0_BUF_SIZE];
bool softconnect;
@@ -359,6 +361,7 @@ struct renesas_usb3 {
bool extcon_usb; /* check vbus and set EXTCON_USB */
bool forced_b_device;
bool start_to_connect;
+ bool usb_role_switch_property;
};
#define gadget_to_renesas_usb3(_gadget) \
@@ -699,8 +702,11 @@ static void usb3_mode_config(struct renesas_usb3 *usb3, bool host, bool a_dev)
unsigned long flags;
spin_lock_irqsave(&usb3->lock, flags);
- usb3_set_mode_by_role_sw(usb3, host);
- usb3_vbus_out(usb3, a_dev);
+ if (!usb3->usb_role_switch_property ||
+ usb3->connection_state != USB_ROLE_NONE) {
+ usb3_set_mode_by_role_sw(usb3, host);
+ usb3_vbus_out(usb3, a_dev);
+ }
/* for A-Peripheral or forced B-device mode */
if ((!host && a_dev) || usb3->start_to_connect)
usb3_connect(usb3);
@@ -716,7 +722,9 @@ static void usb3_check_id(struct renesas_usb3 *usb3)
{
usb3->extcon_host = usb3_is_a_device(usb3);
- if (usb3->extcon_host && !usb3->forced_b_device)
+ if ((!usb3->usb_role_switch_property &&
+ usb3->extcon_host && !usb3->forced_b_device) ||
+ usb3->connection_state == USB_ROLE_HOST)
usb3_mode_config(usb3, true, true);
else
usb3_mode_config(usb3, false, false);
@@ -2343,14 +2351,65 @@ static enum usb_role renesas_usb3_role_switch_get(struct device *dev)
return cur_role;
}
-static int renesas_usb3_role_switch_set(struct device *dev,
- enum usb_role role)
+static void handle_ext_role_switch_states(struct device *dev,
+ enum usb_role role)
+{
+ struct renesas_usb3 *usb3 = dev_get_drvdata(dev);
+ struct device *host = usb3->host_dev;
+ enum usb_role cur_role = renesas_usb3_role_switch_get(dev);
+
+ switch (role) {
+ case USB_ROLE_NONE:
+ usb3->connection_state = USB_ROLE_NONE;
+ if (usb3->driver)
+ usb3_disconnect(usb3);
+ usb3_vbus_out(usb3, false);
+ break;
+ case USB_ROLE_DEVICE:
+ if (usb3->connection_state == USB_ROLE_NONE) {
+ usb3->connection_state = USB_ROLE_DEVICE;
+ usb3_set_mode(usb3, false);
+ if (usb3->driver)
+ usb3_connect(usb3);
+ } else if (cur_role == USB_ROLE_HOST) {
+ device_release_driver(host);
+ usb3_set_mode(usb3, false);
+ if (usb3->driver)
+ usb3_connect(usb3);
+ }
+ usb3_vbus_out(usb3, false);
+ break;
+ case USB_ROLE_HOST:
+ if (usb3->connection_state == USB_ROLE_NONE) {
+ if (usb3->driver)
+ usb3_disconnect(usb3);
+
+ usb3->connection_state = USB_ROLE_HOST;
+ usb3_set_mode(usb3, true);
+ usb3_vbus_out(usb3, true);
+ if (device_attach(host) < 0)
+ dev_err(dev, "device_attach(host) failed\n");
+ } else if (cur_role == USB_ROLE_DEVICE) {
+ usb3_disconnect(usb3);
+ /* Must set the mode before device_attach of the host */
+ usb3_set_mode(usb3, true);
+ /* This device_attach() might sleep */
+ if (device_attach(host) < 0)
+ dev_err(dev, "device_attach(host) failed\n");
+ }
+ break;
+ default:
+ break;
+ }
+}
+
+static void handle_role_switch_states(struct device *dev,
+ enum usb_role role)
{
struct renesas_usb3 *usb3 = dev_get_drvdata(dev);
struct device *host = usb3->host_dev;
enum usb_role cur_role = renesas_usb3_role_switch_get(dev);
- pm_runtime_get_sync(dev);
if (cur_role == USB_ROLE_HOST && role == USB_ROLE_DEVICE) {
device_release_driver(host);
usb3_set_mode(usb3, false);
@@ -2361,6 +2420,20 @@ static int renesas_usb3_role_switch_set(struct device *dev,
if (device_attach(host) < 0)
dev_err(dev, "device_attach(host) failed\n");
}
+}
+
+static int renesas_usb3_role_switch_set(struct device *dev,
+ enum usb_role role)
+{
+ struct renesas_usb3 *usb3 = dev_get_drvdata(dev);
+
+ pm_runtime_get_sync(dev);
+
+ if (usb3->usb_role_switch_property)
+ handle_ext_role_switch_states(dev, role);
+ else
+ handle_role_switch_states(dev, role);
+
pm_runtime_put(dev);
return 0;
@@ -2650,7 +2723,7 @@ static const unsigned int renesas_usb3_cable[] = {
EXTCON_NONE,
};
-static const struct usb_role_switch_desc renesas_usb3_role_switch_desc = {
+static struct usb_role_switch_desc renesas_usb3_role_switch_desc = {
.set = renesas_usb3_role_switch_set,
.get = renesas_usb3_role_switch_get,
.allow_userspace_control = true,
@@ -2741,6 +2814,11 @@ static int renesas_usb3_probe(struct platform_device *pdev)
if (ret < 0)
goto err_dev_create;
+ if (device_property_read_bool(&pdev->dev, "renesas,usb-role-switch")) {
+ usb3->usb_role_switch_property = true;
+ renesas_usb3_role_switch_desc.fwnode = dev_fwnode(&pdev->dev);
+ }
+
INIT_WORK(&usb3->role_work, renesas_usb3_role_work);
usb3->role_sw = usb_role_switch_register(&pdev->dev,
&renesas_usb3_role_switch_desc);
--
2.7.4
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH V5 7/9] arm64: defconfig: enable TYPEC_HD3SS3220 config option
2019-04-24 9:22 [PATCH V5 0/9] Add USB3.0 and TI HD3SS3220 driver support Biju Das
` (5 preceding siblings ...)
2019-04-24 9:22 ` [PATCH V5 6/9] usb: gadget: udc: renesas_usb3: Use usb_role_switch framework Biju Das
@ 2019-04-24 9:22 ` Biju Das
2019-04-24 9:22 ` [PATCH V5 8/9] arm64: dts: renesas: r8a774c0-cat874: Enable USB3.0 host/peripheral device node Biju Das
2019-04-24 9:22 ` [PATCH V5 9/9] arm64: dts: renesas: r8a774c0-cat874: Enable usb role switch support Biju Das
8 siblings, 0 replies; 13+ messages in thread
From: Biju Das @ 2019-04-24 9:22 UTC (permalink / raw)
To: Catalin Marinas, Will Deacon
Cc: Biju Das, Heiko Stuebner, Simon Horman, Andy Gross,
Olof Johansson, Shawn Guo, Jagan Teki, Bjorn Andersson,
Enric Balletbo i Serra, Stefan Wahren, Ezequiel Garcia,
Marc Gonzalez, linux-arm-kernel, Simon Horman,
Geert Uytterhoeven, Chris Paterson, Fabrizio Castro,
linux-renesas-soc
Enable support for the TI HD3SS320 USB Type-C DRP Port controller driver
by turning on CONFIG_TYPEC and CONFIG_TYPEC_HD3SS3220 as modules.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
---
V4-->V5
* No change
V3-->V4
* No change
V2-->V3
* No change
V1-->V2
* No change
---
arch/arm64/configs/defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 04cc2a2..bc4f535 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -584,6 +584,8 @@ CONFIG_USB_ULPI=y
CONFIG_USB_GADGET=y
CONFIG_USB_RENESAS_USBHS_UDC=m
CONFIG_USB_RENESAS_USB3=m
+CONFIG_TYPEC=m
+CONFIG_TYPEC_HD3SS3220=m
CONFIG_MMC=y
CONFIG_MMC_BLOCK_MINORS=32
CONFIG_MMC_ARMMMCI=y
--
2.7.4
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH V5 8/9] arm64: dts: renesas: r8a774c0-cat874: Enable USB3.0 host/peripheral device node
2019-04-24 9:22 [PATCH V5 0/9] Add USB3.0 and TI HD3SS3220 driver support Biju Das
` (6 preceding siblings ...)
2019-04-24 9:22 ` [PATCH V5 7/9] arm64: defconfig: enable TYPEC_HD3SS3220 config option Biju Das
@ 2019-04-24 9:22 ` Biju Das
2019-04-24 9:22 ` [PATCH V5 9/9] arm64: dts: renesas: r8a774c0-cat874: Enable usb role switch support Biju Das
8 siblings, 0 replies; 13+ messages in thread
From: Biju Das @ 2019-04-24 9:22 UTC (permalink / raw)
To: Rob Herring, Mark Rutland
Cc: Biju Das, Greg Kroah-Hartman, Heikki Krogerus, Felipe Balbi,
Simon Horman, Yoshihiro Shimoda, Magnus Damm, linux-renesas-soc,
devicetree, Geert Uytterhoeven, Chris Paterson, Fabrizio Castro
This patch enables USB3.0 host/peripheral device node for r8a774c0
cat874 board.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
---
V4-->V5
* No change
V3-->V4
* No change
V2-->V3
* No change
V1-->V2
* No change
---
arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts b/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts
index 013a48c..b9ae7db 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts
+++ b/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts
@@ -134,6 +134,11 @@
function = "sdhi0";
power-source = <1800>;
};
+
+ usb30_pins: usb30 {
+ groups = "usb30", "usb30_id";
+ function = "usb30";
+ };
};
&rwdt {
@@ -166,3 +171,15 @@
renesas,no-otg-pins;
status = "okay";
};
+
+&usb3_peri0 {
+ companion = <&xhci0>;
+ status = "okay";
+};
+
+&xhci0 {
+ pinctrl-0 = <&usb30_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
--
2.7.4
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH V5 9/9] arm64: dts: renesas: r8a774c0-cat874: Enable usb role switch support
2019-04-24 9:22 [PATCH V5 0/9] Add USB3.0 and TI HD3SS3220 driver support Biju Das
` (7 preceding siblings ...)
2019-04-24 9:22 ` [PATCH V5 8/9] arm64: dts: renesas: r8a774c0-cat874: Enable USB3.0 host/peripheral device node Biju Das
@ 2019-04-24 9:22 ` Biju Das
8 siblings, 0 replies; 13+ messages in thread
From: Biju Das @ 2019-04-24 9:22 UTC (permalink / raw)
To: Rob Herring, Mark Rutland
Cc: Biju Das, Greg Kroah-Hartman, Heikki Krogerus, Felipe Balbi,
Simon Horman, Yoshihiro Shimoda, Magnus Damm, linux-renesas-soc,
devicetree, Geert Uytterhoeven, Chris Paterson, Fabrizio Castro
This patch enables TI HD3SS3220 device and support usb role switch
for the CAT 874 platform.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
---
V4-->V5
* No change
V3-->V4
* No change
V2-->V3
* Used "renesas,usb-role-switch" instead of generic "usb-role-switch"
property
V1-->V2
* New patch
---
arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts | 39 +++++++++++++++++++++++++
1 file changed, 39 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts b/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts
index b9ae7db..746826c 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts
+++ b/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts
@@ -85,6 +85,34 @@
clock-frequency = <48000000>;
};
+&i2c0 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ hd3ss3220@47 {
+ compatible = "ti,hd3ss3220";
+ reg = <0x47>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+ usb_con: connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+ data-role = "dual";
+ };
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hd3ss3220_ep: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&usb3peri_role_switch>;
+ };
+ };
+ };
+};
+
&i2c1 {
pinctrl-0 = <&i2c1_pins>;
pinctrl-names = "default";
@@ -175,6 +203,17 @@
&usb3_peri0 {
companion = <&xhci0>;
status = "okay";
+ renesas,usb-role-switch;
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb3peri_role_switch: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&hd3ss3220_ep>;
+ };
+ };
};
&xhci0 {
--
2.7.4
^ permalink raw reply related [flat|nested] 13+ messages in thread