From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
To: Simon Horman <horms@verge.net.au>,
Geert Uytterhoeven <geert+renesas@glider.be>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>
Cc: Fabrizio Castro <fabrizio.castro@bp.renesas.com>,
Magnus Damm <magnus.damm@gmail.com>,
linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org,
Chris Paterson <Chris.Paterson2@renesas.com>,
Biju Das <biju.das@bp.renesas.com>,
xu_shunji@hoperun.com
Subject: [PATCH] arm64: dts: renesas: hihope-common: Add LEDs support
Date: Fri, 14 Jun 2019 14:14:35 +0100 [thread overview]
Message-ID: <1560518075-2254-1-git-send-email-fabrizio.castro@bp.renesas.com> (raw)
This patch adds LEDs support to the HiHope RZ/G2[MN] Main Board
common device tree.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
---
This patch depends on:
https://patchwork.kernel.org/patch/10986913/
Thanks,
Fab
arch/arm64/boot/dts/renesas/hihope-common.dtsi | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/hihope-common.dtsi b/arch/arm64/boot/dts/renesas/hihope-common.dtsi
index 18763ca..b0bf510 100644
--- a/arch/arm64/boot/dts/renesas/hihope-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/hihope-common.dtsi
@@ -17,6 +17,30 @@
stdout-path = "serial0:115200n8";
};
+ leds {
+ compatible = "gpio-leds";
+
+ led0 {
+ gpios = <&gpio6 11 GPIO_ACTIVE_HIGH>;
+ label = "LED0";
+ };
+
+ led1 {
+ gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+ label = "LED1";
+ };
+
+ led2 {
+ gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
+ label = "LED2";
+ };
+
+ led3 {
+ gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+ label = "LED3";
+ };
+ };
+
reg_1p8v: regulator0 {
compatible = "regulator-fixed";
regulator-name = "fixed-1.8V";
--
2.7.4
next reply other threads:[~2019-06-14 13:17 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-14 13:14 Fabrizio Castro [this message]
2019-06-17 9:33 ` [PATCH] arm64: dts: renesas: hihope-common: Add LEDs support Simon Horman
2019-06-18 10:40 ` Simon Horman
2019-06-18 15:10 ` Geert Uytterhoeven
2019-06-18 15:56 ` Fabrizio Castro
2019-06-19 7:33 ` Geert Uytterhoeven
2019-06-19 8:16 ` Fabrizio Castro
2019-06-19 12:18 ` Simon Horman
2019-06-19 14:11 ` Fabrizio Castro
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1560518075-2254-1-git-send-email-fabrizio.castro@bp.renesas.com \
--to=fabrizio.castro@bp.renesas.com \
--cc=Chris.Paterson2@renesas.com \
--cc=biju.das@bp.renesas.com \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=horms@verge.net.au \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=xu_shunji@hoperun.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).