* [PATCH v3] USB: hub: Fix the broken detection of USB3 device in SMSC hub
@ 2020-02-04 17:44 Hardik Gajjar
2020-02-04 18:10 ` Alan Stern
2020-02-06 11:06 ` Eugeniu Rosca
0 siblings, 2 replies; 3+ messages in thread
From: Hardik Gajjar @ 2020-02-04 17:44 UTC (permalink / raw)
To: gregkh, stern, thinhn, Kento.A.Kobayashi, atmgnd, linux-usb
Cc: andrew_gabbasov, erosca, linux-renesas-soc, hgajjar
Renesas R-Car H3ULCB + Kingfisher Infotainment Board is either not able
to detect the USB3.0 mass storage devices or is detecting those as
USB2.0 high speed devices.
The explanation given by Renesas is that, due to a HW issue, the XHCI
driver does not wake up after going to sleep on connecting a USB3.0
device.
In order to mitigate that, disable the auto-suspend feature
specifically for SMSC hubs from hub_probe() function, as a quirk.
Renesas Kingfisher Infotainment Board has two USB3.0 ports (CN2) which
are connected via USB5534B 4-port SuperSpeed/Hi-Speed, low-power,
configurable hub controller.
[1] SanDisk USB 3.0 device detected as USB-2.0 before the patch
[ 74.036390] usb 5-1.1: new high-speed USB device number 4 using xhci-hcd
[ 74.061598] usb 5-1.1: New USB device found, idVendor=0781, idProduct=5581, bcdDevice= 1.00
[ 74.069976] usb 5-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 74.077303] usb 5-1.1: Product: Ultra
[ 74.080980] usb 5-1.1: Manufacturer: SanDisk
[ 74.085263] usb 5-1.1: SerialNumber: 4C530001110208116550
[2] SanDisk USB 3.0 device detected as USB-3.0 after the patch
[ 34.565078] usb 6-1.1: new SuperSpeed Gen 1 USB device number 3 using xhci-hcd
[ 34.588719] usb 6-1.1: New USB device found, idVendor=0781, idProduct=5581, bcdDevice= 1.00
[ 34.597098] usb 6-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 34.604430] usb 6-1.1: Product: Ultra
[ 34.608110] usb 6-1.1: Manufacturer: SanDisk
[ 34.612397] usb 6-1.1: SerialNumber: 4C530001110208116550
Signed-off-by: Hardik Gajjar <hgajjar@de.adit-jv.com>
---
Changes in v2:
- [Alan Stern] Switched from pm_runtime_set_autosuspend_delay()
to usb_autopm_get_interface()
- Improved commit description
- Rebased against v5.5
- https://lore.kernel.org/linux-renesas-soc/1579876573-13741-1-git-send-email-hgajjar@de.adit-jv.com/
Changes in v3:
- [Alan Stern] Called usb_autopm_put_interface() from
hub_disconnect() to enable auto suspend for interface.
- https://lore.kernel.org/linux-renesas-soc/1580403994-21076-1-git-send-email-hgajjar@de.adit-jv.com/
drivers/usb/core/hub.c | 15 +++++++++++++++
drivers/usb/core/hub.h | 1 +
2 files changed, 16 insertions(+)
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 3405b14..1c74485 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -38,7 +38,9 @@
#include "otg_whitelist.h"
#define USB_VENDOR_GENESYS_LOGIC 0x05e3
+#define USB_VENDOR_SMSC 0x0424
#define HUB_QUIRK_CHECK_PORT_AUTOSUSPEND 0x01
+#define HUB_QUIRK_DISABLE_AUTOSUSPEND 0x02
#define USB_TP_TRANSMISSION_DELAY 40 /* ns */
#define USB_TP_TRANSMISSION_DELAY_MAX 65535 /* ns */
@@ -1731,6 +1733,10 @@ static void hub_disconnect(struct usb_interface *intf)
kfree(hub->buffer);
pm_suspend_ignore_children(&intf->dev, false);
+
+ if (hub->quirk_disable_autosuspend)
+ usb_autopm_put_interface(intf);
+
kref_put(&hub->kref, hub_release);
}
@@ -1863,6 +1869,11 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id)
if (id->driver_info & HUB_QUIRK_CHECK_PORT_AUTOSUSPEND)
hub->quirk_check_port_auto_suspend = 1;
+ if (id->driver_info & HUB_QUIRK_DISABLE_AUTOSUSPEND) {
+ hub->quirk_disable_autosuspend = 1;
+ usb_autopm_get_interface(intf);
+ }
+
if (hub_configure(hub, &desc->endpoint[0].desc) >= 0)
return 0;
@@ -5599,6 +5610,10 @@ static void hub_event(struct work_struct *work)
}
static const struct usb_device_id hub_id_table[] = {
+ { .match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_CLASS,
+ .idVendor = USB_VENDOR_SMSC,
+ .bInterfaceClass = USB_CLASS_HUB,
+ .driver_info = HUB_QUIRK_DISABLE_AUTOSUSPEND},
{ .match_flags = USB_DEVICE_ID_MATCH_VENDOR
| USB_DEVICE_ID_MATCH_INT_CLASS,
.idVendor = USB_VENDOR_GENESYS_LOGIC,
diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h
index a9e24e4..2fe9c9f 100644
--- a/drivers/usb/core/hub.h
+++ b/drivers/usb/core/hub.h
@@ -61,6 +61,7 @@ struct usb_hub {
unsigned quiescing:1;
unsigned disconnected:1;
unsigned in_reset:1;
+ unsigned quirk_disable_autosuspend:1;
unsigned quirk_check_port_auto_suspend:1;
--
2.7.4
^ permalink raw reply related [flat|nested] 3+ messages in thread* Re: [PATCH v3] USB: hub: Fix the broken detection of USB3 device in SMSC hub
2020-02-04 17:44 [PATCH v3] USB: hub: Fix the broken detection of USB3 device in SMSC hub Hardik Gajjar
@ 2020-02-04 18:10 ` Alan Stern
2020-02-06 11:06 ` Eugeniu Rosca
1 sibling, 0 replies; 3+ messages in thread
From: Alan Stern @ 2020-02-04 18:10 UTC (permalink / raw)
To: Hardik Gajjar
Cc: gregkh, thinhn, Kento.A.Kobayashi, atmgnd, linux-usb,
andrew_gabbasov, erosca, linux-renesas-soc
On Tue, 4 Feb 2020, Hardik Gajjar wrote:
> Renesas R-Car H3ULCB + Kingfisher Infotainment Board is either not able
> to detect the USB3.0 mass storage devices or is detecting those as
> USB2.0 high speed devices.
>
> The explanation given by Renesas is that, due to a HW issue, the XHCI
> driver does not wake up after going to sleep on connecting a USB3.0
> device.
>
> In order to mitigate that, disable the auto-suspend feature
> specifically for SMSC hubs from hub_probe() function, as a quirk.
>
> Renesas Kingfisher Infotainment Board has two USB3.0 ports (CN2) which
> are connected via USB5534B 4-port SuperSpeed/Hi-Speed, low-power,
> configurable hub controller.
>
> [1] SanDisk USB 3.0 device detected as USB-2.0 before the patch
> [ 74.036390] usb 5-1.1: new high-speed USB device number 4 using xhci-hcd
> [ 74.061598] usb 5-1.1: New USB device found, idVendor=0781, idProduct=5581, bcdDevice= 1.00
> [ 74.069976] usb 5-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> [ 74.077303] usb 5-1.1: Product: Ultra
> [ 74.080980] usb 5-1.1: Manufacturer: SanDisk
> [ 74.085263] usb 5-1.1: SerialNumber: 4C530001110208116550
>
> [2] SanDisk USB 3.0 device detected as USB-3.0 after the patch
> [ 34.565078] usb 6-1.1: new SuperSpeed Gen 1 USB device number 3 using xhci-hcd
> [ 34.588719] usb 6-1.1: New USB device found, idVendor=0781, idProduct=5581, bcdDevice= 1.00
> [ 34.597098] usb 6-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> [ 34.604430] usb 6-1.1: Product: Ultra
> [ 34.608110] usb 6-1.1: Manufacturer: SanDisk
> [ 34.612397] usb 6-1.1: SerialNumber: 4C530001110208116550
>
> Signed-off-by: Hardik Gajjar <hgajjar@de.adit-jv.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
> ---
> Changes in v2:
> - [Alan Stern] Switched from pm_runtime_set_autosuspend_delay()
> to usb_autopm_get_interface()
> - Improved commit description
> - Rebased against v5.5
> - https://lore.kernel.org/linux-renesas-soc/1579876573-13741-1-git-send-email-hgajjar@de.adit-jv.com/
>
> Changes in v3:
> - [Alan Stern] Called usb_autopm_put_interface() from
> hub_disconnect() to enable auto suspend for interface.
> - https://lore.kernel.org/linux-renesas-soc/1580403994-21076-1-git-send-email-hgajjar@de.adit-jv.com/
>
> drivers/usb/core/hub.c | 15 +++++++++++++++
> drivers/usb/core/hub.h | 1 +
> 2 files changed, 16 insertions(+)
>
> diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
> index 3405b14..1c74485 100644
> --- a/drivers/usb/core/hub.c
> +++ b/drivers/usb/core/hub.c
> @@ -38,7 +38,9 @@
> #include "otg_whitelist.h"
>
> #define USB_VENDOR_GENESYS_LOGIC 0x05e3
> +#define USB_VENDOR_SMSC 0x0424
> #define HUB_QUIRK_CHECK_PORT_AUTOSUSPEND 0x01
> +#define HUB_QUIRK_DISABLE_AUTOSUSPEND 0x02
>
> #define USB_TP_TRANSMISSION_DELAY 40 /* ns */
> #define USB_TP_TRANSMISSION_DELAY_MAX 65535 /* ns */
> @@ -1731,6 +1733,10 @@ static void hub_disconnect(struct usb_interface *intf)
> kfree(hub->buffer);
>
> pm_suspend_ignore_children(&intf->dev, false);
> +
> + if (hub->quirk_disable_autosuspend)
> + usb_autopm_put_interface(intf);
> +
> kref_put(&hub->kref, hub_release);
> }
>
> @@ -1863,6 +1869,11 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id)
> if (id->driver_info & HUB_QUIRK_CHECK_PORT_AUTOSUSPEND)
> hub->quirk_check_port_auto_suspend = 1;
>
> + if (id->driver_info & HUB_QUIRK_DISABLE_AUTOSUSPEND) {
> + hub->quirk_disable_autosuspend = 1;
> + usb_autopm_get_interface(intf);
> + }
> +
> if (hub_configure(hub, &desc->endpoint[0].desc) >= 0)
> return 0;
>
> @@ -5599,6 +5610,10 @@ static void hub_event(struct work_struct *work)
> }
>
> static const struct usb_device_id hub_id_table[] = {
> + { .match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_CLASS,
> + .idVendor = USB_VENDOR_SMSC,
> + .bInterfaceClass = USB_CLASS_HUB,
> + .driver_info = HUB_QUIRK_DISABLE_AUTOSUSPEND},
> { .match_flags = USB_DEVICE_ID_MATCH_VENDOR
> | USB_DEVICE_ID_MATCH_INT_CLASS,
> .idVendor = USB_VENDOR_GENESYS_LOGIC,
> diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h
> index a9e24e4..2fe9c9f 100644
> --- a/drivers/usb/core/hub.h
> +++ b/drivers/usb/core/hub.h
> @@ -61,6 +61,7 @@ struct usb_hub {
> unsigned quiescing:1;
> unsigned disconnected:1;
> unsigned in_reset:1;
> + unsigned quirk_disable_autosuspend:1;
>
> unsigned quirk_check_port_auto_suspend:1;
>
>
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH v3] USB: hub: Fix the broken detection of USB3 device in SMSC hub
2020-02-04 17:44 [PATCH v3] USB: hub: Fix the broken detection of USB3 device in SMSC hub Hardik Gajjar
2020-02-04 18:10 ` Alan Stern
@ 2020-02-06 11:06 ` Eugeniu Rosca
1 sibling, 0 replies; 3+ messages in thread
From: Eugeniu Rosca @ 2020-02-06 11:06 UTC (permalink / raw)
To: Hardik Gajjar
Cc: gregkh, stern, thinhn, Kento.A.Kobayashi, atmgnd, linux-usb,
andrew_gabbasov, erosca, linux-renesas-soc, Eugeniu Rosca
Hi Hardik,
On Tue, Feb 04, 2020 at 06:44:13PM +0100, Hardik Gajjar wrote:
> Renesas R-Car H3ULCB + Kingfisher Infotainment Board is either not able
> to detect the USB3.0 mass storage devices or is detecting those as
> USB2.0 high speed devices.
>
> The explanation given by Renesas is that, due to a HW issue, the XHCI
> driver does not wake up after going to sleep on connecting a USB3.0
> device.
>
> In order to mitigate that, disable the auto-suspend feature
> specifically for SMSC hubs from hub_probe() function, as a quirk.
>
> Renesas Kingfisher Infotainment Board has two USB3.0 ports (CN2) which
> are connected via USB5534B 4-port SuperSpeed/Hi-Speed, low-power,
> configurable hub controller.
>
> [1] SanDisk USB 3.0 device detected as USB-2.0 before the patch
> [ 74.036390] usb 5-1.1: new high-speed USB device number 4 using xhci-hcd
> [ 74.061598] usb 5-1.1: New USB device found, idVendor=0781, idProduct=5581, bcdDevice= 1.00
> [ 74.069976] usb 5-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> [ 74.077303] usb 5-1.1: Product: Ultra
> [ 74.080980] usb 5-1.1: Manufacturer: SanDisk
> [ 74.085263] usb 5-1.1: SerialNumber: 4C530001110208116550
>
> [2] SanDisk USB 3.0 device detected as USB-3.0 after the patch
> [ 34.565078] usb 6-1.1: new SuperSpeed Gen 1 USB device number 3 using xhci-hcd
> [ 34.588719] usb 6-1.1: New USB device found, idVendor=0781, idProduct=5581, bcdDevice= 1.00
> [ 34.597098] usb 6-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> [ 34.604430] usb 6-1.1: Product: Ultra
> [ 34.608110] usb 6-1.1: Manufacturer: SanDisk
> [ 34.612397] usb 6-1.1: SerialNumber: 4C530001110208116550
Thanks for the comprehensible and accurate write-up.
> diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h
> index a9e24e4..2fe9c9f 100644
> --- a/drivers/usb/core/hub.h
> +++ b/drivers/usb/core/hub.h
> @@ -61,6 +61,7 @@ struct usb_hub {
> unsigned quiescing:1;
> unsigned disconnected:1;
> unsigned in_reset:1;
> + unsigned quirk_disable_autosuspend:1;
I think it would make sense to respin the patch once again with the
above spaces converted to tabs, for consistency.
I would also include Alan's Acked-by (thanks!) and since Alan reshaped
the patch significantly in the last iteration, I would add his
Suggested-by too.
In addition to the above (please, also include):
Tested-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Thanks!
--
Best Regards
Eugeniu Rosca
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2020-02-06 11:06 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-02-04 17:44 [PATCH v3] USB: hub: Fix the broken detection of USB3 device in SMSC hub Hardik Gajjar
2020-02-04 18:10 ` Alan Stern
2020-02-06 11:06 ` Eugeniu Rosca
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).