[PATCH v6 0/7] clk: renesas: r8a77990, r8a774c0: Add Z2 clock

[PATCH v6 0/7] clk: renesas: r8a77990, r8a774c0: Add Z2 clock

[Simon Horman]

Hi,

this series adds the Z2 clock as a clock with both a fixed and variable
divisor with a parent of PLL0 to the CPG-MSSR drivers for the R-Car E3
(r8a77990) and RZ/G2E (r8a774c0) SoCs.

In order to do so this series:

1. Parameterise Z and Z2 clock fixed divisor in shared Gen-3 CPG
   driver code to allow fixed divisors other than 2 - the E3 Z2
   clock has a fixed divisor of 4

2. Parameterise offset of Z and Z2 clock control bits -
   the offsets on E3 differ to other R-Car Gen 3 SoCs

3. [Cleanup] Remove now redundant CLK_TYPE_GEN3_Z2

4. Support Z and Z2 clocks with high frequency parents.
   The parent of the E3 Z2 clock, PLL0, is 4.8GHz and thus
   when expressed in HZ must be treated as a 64bit value.

5. Actually add the Z2 clocks

Changes since v5
----------------
* Remove now redundant CLK_TYPE_GEN3_Z2
* Revise changelogs

Changes since v4
----------------
* Separate patch to add DIV64_U64_ROUND_CLOSEST helper
* Accumulate review tags

Changes since v3
----------------
* Add and use DIV64_U64_ROUND_CLOSEST in the patch to allow
  high frequency parents. This corrects the patch for 32bit platforms.
* Accumulate review and testing tags.

Changes since v2
----------------
* Parameterise control bit offset rather than using a quirk
* Revised RZ/G2E patch - I was confused and updating the file for
  the wrong part number


Testing Overview
----------------

v6 of this patchset was tested on Ebisu-4D/E3 with top of
clk-renesas-for-v5.2 [adeff208ea6f ("clk: renesas: r9a06g032: Add missing
PCI USB clock")].  This allowed CPUFreq to be successfully exercised.

v6 was also tested on top of clk-renesas-for-v5 for regressions
Salvator-X/M3-W ES1.0.

This v3 of this patchset was been independently tested RZ/G2E.
It is not expected that v6 will have any behavioural differences
on that (or any other 64bit) platform.


Patches List by Author
----------------------

Simon Horman (5):
  clk: renesas: rcar-gen3: Parameterise Z and Z2 clock offset
  clk: renesas: rcar-gen3: Remove CLK_TYPE_GEN3_Z2
  math64: New DIV64_U64_ROUND_CLOSEST helper
  clk: renesas: rcar-gen3: Support Z and Z2 clocks with high frequency
    parents
  clk: renesas: r8a774c0: Add Z2 clock

Takeshi Kihara (2):
  clk: renesas: rcar-gen3: Parameterise Z and Z2 clock fixed divisor
  clk: renesas: r8a77990: Add Z2 clock

 drivers/clk/renesas/r8a774a1-cpg-mssr.c |  4 ++--
 drivers/clk/renesas/r8a774c0-cpg-mssr.c |  1 +
 drivers/clk/renesas/r8a7795-cpg-mssr.c  |  5 +++--
 drivers/clk/renesas/r8a7796-cpg-mssr.c  |  5 +++--
 drivers/clk/renesas/r8a77965-cpg-mssr.c |  2 +-
 drivers/clk/renesas/r8a77990-cpg-mssr.c |  1 +
 drivers/clk/renesas/rcar-gen3-cpg.c     | 28 +++++++++++++---------------
 drivers/clk/renesas/rcar-gen3-cpg.h     |  5 ++++-
 include/linux/math64.h                  | 13 +++++++++++++
 9 files changed, 41 insertions(+), 23 deletions(-)

-- 
2.11.0

[PATCH v6 1/7] clk: renesas: rcar-gen3: Parameterise Z and Z2 clock fixed divisor

[Simon Horman]

From: Takeshi Kihara <takeshi.kihara.df@renesas.com>

Parameterise Z and Z2 clock fixed divisor to allow clocks with a fixed
divisor other than 2, the value used by all such clocks supported to date.

This is in preparation for supporting the Z2 clock on the R-Car E3
(r8a77990) SoC which has a fixed divisor of 4.

Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
[simon: squashed several patches; rewrote changelog; added r8a774a1 change]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v3
- Retain original whitespace alignment

v2
- New patch
---
 drivers/clk/renesas/r8a774a1-cpg-mssr.c |  4 ++--
 drivers/clk/renesas/r8a7795-cpg-mssr.c  |  5 +++--
 drivers/clk/renesas/r8a7796-cpg-mssr.c  |  5 +++--
 drivers/clk/renesas/r8a77965-cpg-mssr.c |  2 +-
 drivers/clk/renesas/rcar-gen3-cpg.c     | 24 +++++++++++++++---------
 drivers/clk/renesas/rcar-gen3-cpg.h     |  4 ++++
 6 files changed, 28 insertions(+), 16 deletions(-)

diff --git a/drivers/clk/renesas/r8a774a1-cpg-mssr.c b/drivers/clk/renesas/r8a774a1-cpg-mssr.c
index 4d92b27a6153..99bcb7c8022f 100644
--- a/drivers/clk/renesas/r8a774a1-cpg-mssr.c
+++ b/drivers/clk/renesas/r8a774a1-cpg-mssr.c
@@ -71,8 +71,8 @@ static const struct cpg_core_clk r8a774a1_core_clks[] __initconst = {
 	DEF_GEN3_OSC(".r",      CLK_RINT,          CLK_EXTAL,      32),
 
 	/* Core Clock Outputs */
-	DEF_BASE("z",           R8A774A1_CLK_Z,     CLK_TYPE_GEN3_Z, CLK_PLL0),
-	DEF_BASE("z2",          R8A774A1_CLK_Z2,    CLK_TYPE_GEN3_Z2, CLK_PLL2),
+	DEF_GEN3_Z("z",		R8A774A1_CLK_Z,     CLK_TYPE_GEN3_Z, CLK_PLL0, 2),
+	DEF_GEN3_Z("z2",	R8A774A1_CLK_Z2,    CLK_TYPE_GEN3_Z2, CLK_PLL2, 2),
 	DEF_FIXED("ztr",        R8A774A1_CLK_ZTR,   CLK_PLL1_DIV2,  6, 1),
 	DEF_FIXED("ztrd2",      R8A774A1_CLK_ZTRD2, CLK_PLL1_DIV2, 12, 1),
 	DEF_FIXED("zt",         R8A774A1_CLK_ZT,    CLK_PLL1_DIV2,  4, 1),
diff --git a/drivers/clk/renesas/r8a7795-cpg-mssr.c b/drivers/clk/renesas/r8a7795-cpg-mssr.c
index 86842c9fd314..d4cf1c91533e 100644
--- a/drivers/clk/renesas/r8a7795-cpg-mssr.c
+++ b/drivers/clk/renesas/r8a7795-cpg-mssr.c
@@ -3,6 +3,7 @@
  * r8a7795 Clock Pulse Generator / Module Standby and Software Reset
  *
  * Copyright (C) 2015 Glider bvba
+ * Copyright (C) 2018 Renesas Electronics Corp.
  *
  * Based on clk-rcar-gen3.c
  *
@@ -73,8 +74,8 @@ static struct cpg_core_clk r8a7795_core_clks[] __initdata = {
 	DEF_GEN3_OSC(".r",      CLK_RINT,          CLK_EXTAL,      32),
 
 	/* Core Clock Outputs */
-	DEF_BASE("z",           R8A7795_CLK_Z,     CLK_TYPE_GEN3_Z, CLK_PLL0),
-	DEF_BASE("z2",          R8A7795_CLK_Z2,    CLK_TYPE_GEN3_Z2, CLK_PLL2),
+	DEF_GEN3_Z("z",         R8A7795_CLK_Z,	   CLK_TYPE_GEN3_Z,  CLK_PLL0, 2),
+	DEF_GEN3_Z("z2",        R8A7795_CLK_Z2,    CLK_TYPE_GEN3_Z2, CLK_PLL2, 2),
 	DEF_FIXED("ztr",        R8A7795_CLK_ZTR,   CLK_PLL1_DIV2,  6, 1),
 	DEF_FIXED("ztrd2",      R8A7795_CLK_ZTRD2, CLK_PLL1_DIV2, 12, 1),
 	DEF_FIXED("zt",         R8A7795_CLK_ZT,    CLK_PLL1_DIV2,  4, 1),
diff --git a/drivers/clk/renesas/r8a7796-cpg-mssr.c b/drivers/clk/renesas/r8a7796-cpg-mssr.c
index 12c455859f2c..77254f2b4519 100644
--- a/drivers/clk/renesas/r8a7796-cpg-mssr.c
+++ b/drivers/clk/renesas/r8a7796-cpg-mssr.c
@@ -3,6 +3,7 @@
  * r8a7796 Clock Pulse Generator / Module Standby and Software Reset
  *
  * Copyright (C) 2016 Glider bvba
+ * Copyright (C) 2018 Renesas Electronics Corp.
  *
  * Based on r8a7795-cpg-mssr.c
  *
@@ -73,8 +74,8 @@ static const struct cpg_core_clk r8a7796_core_clks[] __initconst = {
 	DEF_GEN3_OSC(".r",      CLK_RINT,          CLK_EXTAL,      32),
 
 	/* Core Clock Outputs */
-	DEF_BASE("z",           R8A7796_CLK_Z,     CLK_TYPE_GEN3_Z, CLK_PLL0),
-	DEF_BASE("z2",          R8A7796_CLK_Z2,    CLK_TYPE_GEN3_Z2, CLK_PLL2),
+	DEF_GEN3_Z("z",         R8A7796_CLK_Z,     CLK_TYPE_GEN3_Z,  CLK_PLL0, 2),
+	DEF_GEN3_Z("z2",        R8A7796_CLK_Z2,    CLK_TYPE_GEN3_Z2, CLK_PLL2, 2),
 	DEF_FIXED("ztr",        R8A7796_CLK_ZTR,   CLK_PLL1_DIV2,  6, 1),
 	DEF_FIXED("ztrd2",      R8A7796_CLK_ZTRD2, CLK_PLL1_DIV2, 12, 1),
 	DEF_FIXED("zt",         R8A7796_CLK_ZT,    CLK_PLL1_DIV2,  4, 1),
diff --git a/drivers/clk/renesas/r8a77965-cpg-mssr.c b/drivers/clk/renesas/r8a77965-cpg-mssr.c
index eb1cca58a1e1..f8f73558c1ec 100644
--- a/drivers/clk/renesas/r8a77965-cpg-mssr.c
+++ b/drivers/clk/renesas/r8a77965-cpg-mssr.c
@@ -71,7 +71,7 @@ static const struct cpg_core_clk r8a77965_core_clks[] __initconst = {
 	DEF_GEN3_OSC(".r",	CLK_RINT,		CLK_EXTAL,	32),
 
 	/* Core Clock Outputs */
-	DEF_BASE("z",		R8A77965_CLK_Z,		CLK_TYPE_GEN3_Z, CLK_PLL0),
+	DEF_GEN3_Z("z",		R8A77965_CLK_Z,		CLK_TYPE_GEN3_Z,  CLK_PLL0, 2),
 	DEF_FIXED("ztr",	R8A77965_CLK_ZTR,	CLK_PLL1_DIV2,	6, 1),
 	DEF_FIXED("ztrd2",	R8A77965_CLK_ZTRD2,	CLK_PLL1_DIV2,	12, 1),
 	DEF_FIXED("zt",		R8A77965_CLK_ZT,	CLK_PLL1_DIV2,	4, 1),
diff --git a/drivers/clk/renesas/rcar-gen3-cpg.c b/drivers/clk/renesas/rcar-gen3-cpg.c
index dcd4ac389326..be0940c8103c 100644
--- a/drivers/clk/renesas/rcar-gen3-cpg.c
+++ b/drivers/clk/renesas/rcar-gen3-cpg.c
@@ -96,6 +96,7 @@ struct cpg_z_clk {
 	void __iomem *reg;
 	void __iomem *kick_reg;
 	unsigned long mask;
+	unsigned int fixed_div;
 };
 
 #define to_z_clk(_hw)	container_of(_hw, struct cpg_z_clk, hw)
@@ -110,17 +111,18 @@ static unsigned long cpg_z_clk_recalc_rate(struct clk_hw *hw,
 	val = readl(zclk->reg) & zclk->mask;
 	mult = 32 - (val >> __ffs(zclk->mask));
 
-	/* Factor of 2 is for fixed divider */
-	return DIV_ROUND_CLOSEST_ULL((u64)parent_rate * mult, 32 * 2);
+	return DIV_ROUND_CLOSEST_ULL((u64)parent_rate * mult,
+				     32 * zclk->fixed_div);
 }
 
 static long cpg_z_clk_round_rate(struct clk_hw *hw, unsigned long rate,
 				 unsigned long *parent_rate)
 {
-	/* Factor of 2 is for fixed divider */
-	unsigned long prate = *parent_rate / 2;
+	struct cpg_z_clk *zclk = to_z_clk(hw);
+	unsigned long prate;
 	unsigned int mult;
 
+	prate = *parent_rate / zclk->fixed_div;;
 	mult = div_u64(rate * 32ULL, prate);
 	mult = clamp(mult, 1U, 32U);
 
@@ -134,8 +136,8 @@ static int cpg_z_clk_set_rate(struct clk_hw *hw, unsigned long rate,
 	unsigned int mult;
 	unsigned int i;
 
-	/* Factor of 2 is for fixed divider */
-	mult = DIV_ROUND_CLOSEST_ULL(rate * 32ULL * 2, parent_rate);
+	mult = DIV_ROUND_CLOSEST_ULL(rate * 32ULL * zclk->fixed_div,
+				     parent_rate);
 	mult = clamp(mult, 1U, 32U);
 
 	if (readl(zclk->kick_reg) & CPG_FRQCRB_KICK)
@@ -178,7 +180,8 @@ static const struct clk_ops cpg_z_clk_ops = {
 static struct clk * __init cpg_z_clk_register(const char *name,
 					      const char *parent_name,
 					      void __iomem *reg,
-					      unsigned long mask)
+					      unsigned long mask,
+					      unsigned int div)
 {
 	struct clk_init_data init;
 	struct cpg_z_clk *zclk;
@@ -198,6 +201,7 @@ static struct clk * __init cpg_z_clk_register(const char *name,
 	zclk->kick_reg = reg + CPG_FRQCRB;
 	zclk->hw.init = &init;
 	zclk->mask = mask;
+	zclk->fixed_div = div; /* PLLVCO x 1/div x SYS-CPU divider */
 
 	clk = clk_register(NULL, &zclk->hw);
 	if (IS_ERR(clk))
@@ -658,11 +662,13 @@ struct clk * __init rcar_gen3_cpg_clk_register(struct device *dev,
 
 	case CLK_TYPE_GEN3_Z:
 		return cpg_z_clk_register(core->name, __clk_get_name(parent),
-					  base, CPG_FRQCRC_ZFC_MASK);
+					  base, CPG_FRQCRC_ZFC_MASK,
+					  core->div);
 
 	case CLK_TYPE_GEN3_Z2:
 		return cpg_z_clk_register(core->name, __clk_get_name(parent),
-					  base, CPG_FRQCRC_Z2FC_MASK);
+					  base, CPG_FRQCRC_Z2FC_MASK,
+					  core->div);
 
 	case CLK_TYPE_GEN3_OSC:
 		/*
diff --git a/drivers/clk/renesas/rcar-gen3-cpg.h b/drivers/clk/renesas/rcar-gen3-cpg.h
index eac1b057455a..802936625330 100644
--- a/drivers/clk/renesas/rcar-gen3-cpg.h
+++ b/drivers/clk/renesas/rcar-gen3-cpg.h
@@ -3,6 +3,7 @@
  * R-Car Gen3 Clock Pulse Generator
  *
  * Copyright (C) 2015-2018 Glider bvba
+ * Copyright (C) 2018 Renesas Electronics Corp.
  *
  */
 
@@ -51,6 +52,9 @@ enum rcar_gen3_clk_types {
 	DEF_BASE(_name, _id, CLK_TYPE_GEN3_RCKSEL,	\
 		 (_parent0) << 16 | (_parent1),	.div = (_div0) << 16 | (_div1))
 
+#define DEF_GEN3_Z(_name, _id, _type, _parent, _div)	\
+	DEF_BASE(_name, _id, _type, _parent, .div = _div)
+
 struct rcar_gen3_cpg_pll_config {
 	u8 extal_div;
 	u8 pll1_mult;
-- 
2.11.0

[PATCH v6 2/7] clk: renesas: rcar-gen3: Parameterise Z and Z2 clock offset

[Simon Horman]

Parameterise the offset of control bits within the FRQCRC register
for Z and Z2 clocks.

This is in preparation for supporting the Z2 clock on the R-Car E3
(r8a77990) SoC which uses a different offset for control bits to
other, already, supported SoCs.

As suggested by Geert Uytterhoeven.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v6
- Revise changelog

v3
- New patch
---
 drivers/clk/renesas/r8a774a1-cpg-mssr.c |  4 ++--
 drivers/clk/renesas/r8a7795-cpg-mssr.c  |  4 ++--
 drivers/clk/renesas/r8a7796-cpg-mssr.c  |  4 ++--
 drivers/clk/renesas/r8a77965-cpg-mssr.c |  2 +-
 drivers/clk/renesas/rcar-gen3-cpg.c     | 15 ++++-----------
 drivers/clk/renesas/rcar-gen3-cpg.h     |  4 ++--
 6 files changed, 13 insertions(+), 20 deletions(-)

diff --git a/drivers/clk/renesas/r8a774a1-cpg-mssr.c b/drivers/clk/renesas/r8a774a1-cpg-mssr.c
index 99bcb7c8022f..8e7bb43b6848 100644
--- a/drivers/clk/renesas/r8a774a1-cpg-mssr.c
+++ b/drivers/clk/renesas/r8a774a1-cpg-mssr.c
@@ -71,8 +71,8 @@ static const struct cpg_core_clk r8a774a1_core_clks[] __initconst = {
 	DEF_GEN3_OSC(".r",      CLK_RINT,          CLK_EXTAL,      32),
 
 	/* Core Clock Outputs */
-	DEF_GEN3_Z("z",		R8A774A1_CLK_Z,     CLK_TYPE_GEN3_Z, CLK_PLL0, 2),
-	DEF_GEN3_Z("z2",	R8A774A1_CLK_Z2,    CLK_TYPE_GEN3_Z2, CLK_PLL2, 2),
+	DEF_GEN3_Z("z",		R8A774A1_CLK_Z,     CLK_TYPE_GEN3_Z,  CLK_PLL0, 2, 8),
+	DEF_GEN3_Z("z2",	R8A774A1_CLK_Z2,    CLK_TYPE_GEN3_Z2, CLK_PLL2, 2, 0),
 	DEF_FIXED("ztr",        R8A774A1_CLK_ZTR,   CLK_PLL1_DIV2,  6, 1),
 	DEF_FIXED("ztrd2",      R8A774A1_CLK_ZTRD2, CLK_PLL1_DIV2, 12, 1),
 	DEF_FIXED("zt",         R8A774A1_CLK_ZT,    CLK_PLL1_DIV2,  4, 1),
diff --git a/drivers/clk/renesas/r8a7795-cpg-mssr.c b/drivers/clk/renesas/r8a7795-cpg-mssr.c
index d4cf1c91533e..d09c0abb032d 100644
--- a/drivers/clk/renesas/r8a7795-cpg-mssr.c
+++ b/drivers/clk/renesas/r8a7795-cpg-mssr.c
@@ -74,8 +74,8 @@ static struct cpg_core_clk r8a7795_core_clks[] __initdata = {
 	DEF_GEN3_OSC(".r",      CLK_RINT,          CLK_EXTAL,      32),
 
 	/* Core Clock Outputs */
-	DEF_GEN3_Z("z",         R8A7795_CLK_Z,	   CLK_TYPE_GEN3_Z,  CLK_PLL0, 2),
-	DEF_GEN3_Z("z2",        R8A7795_CLK_Z2,    CLK_TYPE_GEN3_Z2, CLK_PLL2, 2),
+	DEF_GEN3_Z("z",         R8A7795_CLK_Z,     CLK_TYPE_GEN3_Z,  CLK_PLL0, 2, 8),
+	DEF_GEN3_Z("z2",        R8A7795_CLK_Z2,    CLK_TYPE_GEN3_Z2, CLK_PLL2, 2, 0),
 	DEF_FIXED("ztr",        R8A7795_CLK_ZTR,   CLK_PLL1_DIV2,  6, 1),
 	DEF_FIXED("ztrd2",      R8A7795_CLK_ZTRD2, CLK_PLL1_DIV2, 12, 1),
 	DEF_FIXED("zt",         R8A7795_CLK_ZT,    CLK_PLL1_DIV2,  4, 1),
diff --git a/drivers/clk/renesas/r8a7796-cpg-mssr.c b/drivers/clk/renesas/r8a7796-cpg-mssr.c
index 77254f2b4519..7efd0311dcbd 100644
--- a/drivers/clk/renesas/r8a7796-cpg-mssr.c
+++ b/drivers/clk/renesas/r8a7796-cpg-mssr.c
@@ -74,8 +74,8 @@ static const struct cpg_core_clk r8a7796_core_clks[] __initconst = {
 	DEF_GEN3_OSC(".r",      CLK_RINT,          CLK_EXTAL,      32),
 
 	/* Core Clock Outputs */
-	DEF_GEN3_Z("z",         R8A7796_CLK_Z,     CLK_TYPE_GEN3_Z,  CLK_PLL0, 2),
-	DEF_GEN3_Z("z2",        R8A7796_CLK_Z2,    CLK_TYPE_GEN3_Z2, CLK_PLL2, 2),
+	DEF_GEN3_Z("z",         R8A7796_CLK_Z,     CLK_TYPE_GEN3_Z,  CLK_PLL0, 2, 8),
+	DEF_GEN3_Z("z2",        R8A7796_CLK_Z2,    CLK_TYPE_GEN3_Z2, CLK_PLL2, 2, 0),
 	DEF_FIXED("ztr",        R8A7796_CLK_ZTR,   CLK_PLL1_DIV2,  6, 1),
 	DEF_FIXED("ztrd2",      R8A7796_CLK_ZTRD2, CLK_PLL1_DIV2, 12, 1),
 	DEF_FIXED("zt",         R8A7796_CLK_ZT,    CLK_PLL1_DIV2,  4, 1),
diff --git a/drivers/clk/renesas/r8a77965-cpg-mssr.c b/drivers/clk/renesas/r8a77965-cpg-mssr.c
index f8f73558c1ec..fefa26a1a797 100644
--- a/drivers/clk/renesas/r8a77965-cpg-mssr.c
+++ b/drivers/clk/renesas/r8a77965-cpg-mssr.c
@@ -71,7 +71,7 @@ static const struct cpg_core_clk r8a77965_core_clks[] __initconst = {
 	DEF_GEN3_OSC(".r",	CLK_RINT,		CLK_EXTAL,	32),
 
 	/* Core Clock Outputs */
-	DEF_GEN3_Z("z",		R8A77965_CLK_Z,		CLK_TYPE_GEN3_Z,  CLK_PLL0, 2),
+	DEF_GEN3_Z("z",		R8A77965_CLK_Z,		CLK_TYPE_GEN3_Z,  CLK_PLL0, 2, 8),
 	DEF_FIXED("ztr",	R8A77965_CLK_ZTR,	CLK_PLL1_DIV2,	6, 1),
 	DEF_FIXED("ztrd2",	R8A77965_CLK_ZTRD2,	CLK_PLL1_DIV2,	12, 1),
 	DEF_FIXED("zt",		R8A77965_CLK_ZT,	CLK_PLL1_DIV2,	4, 1),
diff --git a/drivers/clk/renesas/rcar-gen3-cpg.c b/drivers/clk/renesas/rcar-gen3-cpg.c
index be0940c8103c..9af3e1ece81a 100644
--- a/drivers/clk/renesas/rcar-gen3-cpg.c
+++ b/drivers/clk/renesas/rcar-gen3-cpg.c
@@ -88,8 +88,6 @@ static void cpg_simple_notifier_register(struct raw_notifier_head *notifiers,
 #define CPG_FRQCRB			0x00000004
 #define CPG_FRQCRB_KICK			BIT(31)
 #define CPG_FRQCRC			0x000000e0
-#define CPG_FRQCRC_ZFC_MASK		GENMASK(12, 8)
-#define CPG_FRQCRC_Z2FC_MASK		GENMASK(4, 0)
 
 struct cpg_z_clk {
 	struct clk_hw hw;
@@ -180,8 +178,8 @@ static const struct clk_ops cpg_z_clk_ops = {
 static struct clk * __init cpg_z_clk_register(const char *name,
 					      const char *parent_name,
 					      void __iomem *reg,
-					      unsigned long mask,
-					      unsigned int div)
+					      unsigned int div,
+					      unsigned int offset)
 {
 	struct clk_init_data init;
 	struct cpg_z_clk *zclk;
@@ -200,7 +198,7 @@ static struct clk * __init cpg_z_clk_register(const char *name,
 	zclk->reg = reg + CPG_FRQCRC;
 	zclk->kick_reg = reg + CPG_FRQCRB;
 	zclk->hw.init = &init;
-	zclk->mask = mask;
+	zclk->mask = GENMASK(offset + 4, offset);
 	zclk->fixed_div = div; /* PLLVCO x 1/div x SYS-CPU divider */
 
 	clk = clk_register(NULL, &zclk->hw);
@@ -661,14 +659,9 @@ struct clk * __init rcar_gen3_cpg_clk_register(struct device *dev,
 		break;
 
 	case CLK_TYPE_GEN3_Z:
-		return cpg_z_clk_register(core->name, __clk_get_name(parent),
-					  base, CPG_FRQCRC_ZFC_MASK,
-					  core->div);
-
 	case CLK_TYPE_GEN3_Z2:
 		return cpg_z_clk_register(core->name, __clk_get_name(parent),
-					  base, CPG_FRQCRC_Z2FC_MASK,
-					  core->div);
+					  base, core->div, core->offset);
 
 	case CLK_TYPE_GEN3_OSC:
 		/*
diff --git a/drivers/clk/renesas/rcar-gen3-cpg.h b/drivers/clk/renesas/rcar-gen3-cpg.h
index 802936625330..9b4bb763f599 100644
--- a/drivers/clk/renesas/rcar-gen3-cpg.h
+++ b/drivers/clk/renesas/rcar-gen3-cpg.h
@@ -52,8 +52,8 @@ enum rcar_gen3_clk_types {
 	DEF_BASE(_name, _id, CLK_TYPE_GEN3_RCKSEL,	\
 		 (_parent0) << 16 | (_parent1),	.div = (_div0) << 16 | (_div1))
 
-#define DEF_GEN3_Z(_name, _id, _type, _parent, _div)	\
-	DEF_BASE(_name, _id, _type, _parent, .div = _div)
+#define DEF_GEN3_Z(_name, _id, _type, _parent, _div, _offset)	\
+	DEF_BASE(_name, _id, _type, _parent, .div = _div, .offset = _offset)
 
 struct rcar_gen3_cpg_pll_config {
 	u8 extal_div;
-- 
2.11.0

[PATCH v6 3/7] clk: renesas: rcar-gen3: Remove CLK_TYPE_GEN3_Z2

[Simon Horman]

After recent reworking of Z and Z2 clk handling
CLK_TYPE_GEN3_Z and CLK_TYPE_GEN3_Z2 have come to have precisely
the same meaning. Remove this redundancy by eliminating the latter.

This is not expected to have any run-time effect.

As suggested by Geert Uytterhoeven.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
v6
- New patch
---
 drivers/clk/renesas/r8a774a1-cpg-mssr.c | 2 +-
 drivers/clk/renesas/r8a7795-cpg-mssr.c  | 2 +-
 drivers/clk/renesas/r8a7796-cpg-mssr.c  | 2 +-
 drivers/clk/renesas/rcar-gen3-cpg.c     | 1 -
 drivers/clk/renesas/rcar-gen3-cpg.h     | 1 -
 5 files changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/clk/renesas/r8a774a1-cpg-mssr.c b/drivers/clk/renesas/r8a774a1-cpg-mssr.c
index 8e7bb43b6848..44161fd0a09c 100644
--- a/drivers/clk/renesas/r8a774a1-cpg-mssr.c
+++ b/drivers/clk/renesas/r8a774a1-cpg-mssr.c
@@ -72,7 +72,7 @@ static const struct cpg_core_clk r8a774a1_core_clks[] __initconst = {
 
 	/* Core Clock Outputs */
 	DEF_GEN3_Z("z",		R8A774A1_CLK_Z,     CLK_TYPE_GEN3_Z,  CLK_PLL0, 2, 8),
-	DEF_GEN3_Z("z2",	R8A774A1_CLK_Z2,    CLK_TYPE_GEN3_Z2, CLK_PLL2, 2, 0),
+	DEF_GEN3_Z("z2",	R8A774A1_CLK_Z2,    CLK_TYPE_GEN3_Z,  CLK_PLL2, 2, 0),
 	DEF_FIXED("ztr",        R8A774A1_CLK_ZTR,   CLK_PLL1_DIV2,  6, 1),
 	DEF_FIXED("ztrd2",      R8A774A1_CLK_ZTRD2, CLK_PLL1_DIV2, 12, 1),
 	DEF_FIXED("zt",         R8A774A1_CLK_ZT,    CLK_PLL1_DIV2,  4, 1),
diff --git a/drivers/clk/renesas/r8a7795-cpg-mssr.c b/drivers/clk/renesas/r8a7795-cpg-mssr.c
index d09c0abb032d..8287816523c3 100644
--- a/drivers/clk/renesas/r8a7795-cpg-mssr.c
+++ b/drivers/clk/renesas/r8a7795-cpg-mssr.c
@@ -75,7 +75,7 @@ static struct cpg_core_clk r8a7795_core_clks[] __initdata = {
 
 	/* Core Clock Outputs */
 	DEF_GEN3_Z("z",         R8A7795_CLK_Z,     CLK_TYPE_GEN3_Z,  CLK_PLL0, 2, 8),
-	DEF_GEN3_Z("z2",        R8A7795_CLK_Z2,    CLK_TYPE_GEN3_Z2, CLK_PLL2, 2, 0),
+	DEF_GEN3_Z("z2",        R8A7795_CLK_Z2,    CLK_TYPE_GEN3_Z,  CLK_PLL2, 2, 0),
 	DEF_FIXED("ztr",        R8A7795_CLK_ZTR,   CLK_PLL1_DIV2,  6, 1),
 	DEF_FIXED("ztrd2",      R8A7795_CLK_ZTRD2, CLK_PLL1_DIV2, 12, 1),
 	DEF_FIXED("zt",         R8A7795_CLK_ZT,    CLK_PLL1_DIV2,  4, 1),
diff --git a/drivers/clk/renesas/r8a7796-cpg-mssr.c b/drivers/clk/renesas/r8a7796-cpg-mssr.c
index 7efd0311dcbd..5cde1bff8923 100644
--- a/drivers/clk/renesas/r8a7796-cpg-mssr.c
+++ b/drivers/clk/renesas/r8a7796-cpg-mssr.c
@@ -75,7 +75,7 @@ static const struct cpg_core_clk r8a7796_core_clks[] __initconst = {
 
 	/* Core Clock Outputs */
 	DEF_GEN3_Z("z",         R8A7796_CLK_Z,     CLK_TYPE_GEN3_Z,  CLK_PLL0, 2, 8),
-	DEF_GEN3_Z("z2",        R8A7796_CLK_Z2,    CLK_TYPE_GEN3_Z2, CLK_PLL2, 2, 0),
+	DEF_GEN3_Z("z2",        R8A7796_CLK_Z2,    CLK_TYPE_GEN3_Z,  CLK_PLL2, 2, 0),
 	DEF_FIXED("ztr",        R8A7796_CLK_ZTR,   CLK_PLL1_DIV2,  6, 1),
 	DEF_FIXED("ztrd2",      R8A7796_CLK_ZTRD2, CLK_PLL1_DIV2, 12, 1),
 	DEF_FIXED("zt",         R8A7796_CLK_ZT,    CLK_PLL1_DIV2,  4, 1),
diff --git a/drivers/clk/renesas/rcar-gen3-cpg.c b/drivers/clk/renesas/rcar-gen3-cpg.c
index 9af3e1ece81a..a46c5dffbc24 100644
--- a/drivers/clk/renesas/rcar-gen3-cpg.c
+++ b/drivers/clk/renesas/rcar-gen3-cpg.c
@@ -659,7 +659,6 @@ struct clk * __init rcar_gen3_cpg_clk_register(struct device *dev,
 		break;
 
 	case CLK_TYPE_GEN3_Z:
-	case CLK_TYPE_GEN3_Z2:
 		return cpg_z_clk_register(core->name, __clk_get_name(parent),
 					  base, core->div, core->offset);
 
diff --git a/drivers/clk/renesas/rcar-gen3-cpg.h b/drivers/clk/renesas/rcar-gen3-cpg.h
index 9b4bb763f599..15700d219a05 100644
--- a/drivers/clk/renesas/rcar-gen3-cpg.h
+++ b/drivers/clk/renesas/rcar-gen3-cpg.h
@@ -21,7 +21,6 @@ enum rcar_gen3_clk_types {
 	CLK_TYPE_GEN3_R,
 	CLK_TYPE_GEN3_MDSEL,	/* Select parent/divider using mode pin */
 	CLK_TYPE_GEN3_Z,
-	CLK_TYPE_GEN3_Z2,
 	CLK_TYPE_GEN3_OSC,	/* OSC EXTAL predivider and fixed divider */
 	CLK_TYPE_GEN3_RCKSEL,	/* Select parent/divider using RCKCR.CKSEL */
 	CLK_TYPE_GEN3_RPCSRC,
-- 
2.11.0

[PATCH v6 4/7] math64: New DIV64_U64_ROUND_CLOSEST helper

[Simon Horman]

Provide DIV64_U64_ROUND_CLOSEST helper which performs division rounded to
the closest integer using an unsigned 64bit dividend and divisor.

This will be used in a follow-up patch to allow calculation of clock
divisors with high frequency parents in the R-Car Gen3 CPG MSSR driver
where overflow occurs if either the dividend or divisor is 32bit.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v6
- Updated changelog as per suggestions from
  Sergei Shtylyov and Geert Uytterhoeven
- Added Reviewed-by tag from Geert Uytterhoeven

v5
- New separate patch to add DIV64_U64_ROUND_CLOSEST
---
 include/linux/math64.h | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/include/linux/math64.h b/include/linux/math64.h
index bb2c84afb80c..65bef21cdddb 100644
--- a/include/linux/math64.h
+++ b/include/linux/math64.h
@@ -284,4 +284,17 @@ static inline u64 mul_u64_u32_div(u64 a, u32 mul, u32 divisor)
 #define DIV64_U64_ROUND_UP(ll, d)	\
 	({ u64 _tmp = (d); div64_u64((ll) + _tmp - 1, _tmp); })
 
+/**
+ * DIV64_U64_ROUND_CLOSEST - unsigned 64bit divide with 64bit divisor rounded to nearest integer
+ * @dividend: unsigned 64bit dividend
+ * @divisor: unsigned 64bit divisor
+ *
+ * Divide unsigned 64bit dividend by unsigned 64bit divisor
+ * and round to closest integer.
+ *
+ * Return: dividend / divisor rounded to nearest integer
+ */
+#define DIV64_U64_ROUND_CLOSEST(dividend, divisor)	\
+	({ u64 _tmp = (divisor); div64_u64((dividend) + _tmp / 2, _tmp); })
+
 #endif /* _LINUX_MATH64_H */
-- 
2.11.0

[PATCH v6 5/7] clk: renesas: rcar-gen3: Support Z and Z2 clocks with high frequency parents

[Simon Horman]

Support Z and Z2 clocks with parent frequencies greater than UINT32_MAX Hz
(~4.29GHz).

The DIV_ROUND_CLOSEST_ULL() macro accepts a 64bit dividend and 32bit
divisor. This leads to truncation of the divisor, which is the Z or Z2
parent clock frequency in HZ, on platforms where frequency of that clock is
greater than UINT32_MAX Hz.

To resolve this problem the DIV64_U64_ROUND_CLOSEST() macro, which takes
on an unsigned 64bit dividend and divisor, is used.

An earlier version of this patch made use of the existing
DIV_ROUND_CLOSEST() macro, which accepts the prevailing type of the
dividend and divisor. However, this does not compile on 32bit systems, such
as i386 and mips, when called with the types used at this call site, an
unsigned long long dividend and unsigned long divisor.

This work is in preparation for supporting the Z2 clock on the
R-Car Gen3 E3 (r8a77990) SoC which has a 4.8GHz parent clock.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v6
- Revise changelog

v5
- Move adding DIV64_U64_ROUND_CLOSEST to a separate patch
- Revise changelog

v4
- Add and use DIV64_U64_ROUND_CLOSEST

v2
- New patch
---
 drivers/clk/renesas/rcar-gen3-cpg.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/renesas/rcar-gen3-cpg.c b/drivers/clk/renesas/rcar-gen3-cpg.c
index a46c5dffbc24..b64cd188c1ae 100644
--- a/drivers/clk/renesas/rcar-gen3-cpg.c
+++ b/drivers/clk/renesas/rcar-gen3-cpg.c
@@ -134,8 +134,8 @@ static int cpg_z_clk_set_rate(struct clk_hw *hw, unsigned long rate,
 	unsigned int mult;
 	unsigned int i;
 
-	mult = DIV_ROUND_CLOSEST_ULL(rate * 32ULL * zclk->fixed_div,
-				     parent_rate);
+	mult = DIV64_U64_ROUND_CLOSEST(rate * 32ULL * zclk->fixed_div,
+				       parent_rate);
 	mult = clamp(mult, 1U, 32U);
 
 	if (readl(zclk->kick_reg) & CPG_FRQCRB_KICK)
-- 
2.11.0

[PATCH v6 6/7] clk: renesas: r8a77990: Add Z2 clock

[Simon Horman]

From: Takeshi Kihara <takeshi.kihara.df@renesas.com>

Adds support for R-Car E3 (r8a77990) Z2 clock.

Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
[simon: reworked changelog; rebased]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v6 [Simon Horman]
- Rebase for removal of CLK_TYPE_GEN3_Z2; use CLK_TYPE_GEN3_Z instead

v3 [Simon Horman]
- Pass new offset parameter

v2 [Simon Horman]
- Initialise as programmable clock

v1 [Simon Horman]
- Initialise as fixed clock

v0 [Takeshi Kihara]
- Initialise as programmable clock
---
 drivers/clk/renesas/r8a77990-cpg-mssr.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/clk/renesas/r8a77990-cpg-mssr.c b/drivers/clk/renesas/r8a77990-cpg-mssr.c
index 9a278c75c918..99f602cb30a5 100644
--- a/drivers/clk/renesas/r8a77990-cpg-mssr.c
+++ b/drivers/clk/renesas/r8a77990-cpg-mssr.c
@@ -81,6 +81,7 @@ static const struct cpg_core_clk r8a77990_core_clks[] __initconst = {
 	/* Core Clock Outputs */
 	DEF_FIXED("za2",       R8A77990_CLK_ZA2,   CLK_PLL0D24,    1, 1),
 	DEF_FIXED("za8",       R8A77990_CLK_ZA8,   CLK_PLL0D8,     1, 1),
+	DEF_GEN3_Z("z2",       R8A77990_CLK_Z2,    CLK_TYPE_GEN3_Z, CLK_PLL0, 4, 8),
 	DEF_FIXED("ztr",       R8A77990_CLK_ZTR,   CLK_PLL1,       6, 1),
 	DEF_FIXED("zt",        R8A77990_CLK_ZT,    CLK_PLL1,       4, 1),
 	DEF_FIXED("zx",        R8A77990_CLK_ZX,    CLK_PLL1,       3, 1),
-- 
2.11.0

[PATCH v6 7/7] clk: renesas: r8a774c0: Add Z2 clock

[Simon Horman]

Adds support for RZ/G2E (r8a774c0) Z2 clock.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Tested-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v6
- Rebase for removal of CLK_TYPE_GEN3_Z2; use CLK_TYPE_GEN3_Z instead
- Updated Changelog

v3
- New patch
---
 drivers/clk/renesas/r8a774c0-cpg-mssr.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/clk/renesas/r8a774c0-cpg-mssr.c b/drivers/clk/renesas/r8a774c0-cpg-mssr.c
index 34e274f2a273..57098b7e3d0e 100644
--- a/drivers/clk/renesas/r8a774c0-cpg-mssr.c
+++ b/drivers/clk/renesas/r8a774c0-cpg-mssr.c
@@ -81,6 +81,7 @@ static const struct cpg_core_clk r8a774c0_core_clks[] __initconst = {
 	/* Core Clock Outputs */
 	DEF_FIXED("za2",       R8A774C0_CLK_ZA2,   CLK_PLL0D24,    1, 1),
 	DEF_FIXED("za8",       R8A774C0_CLK_ZA8,   CLK_PLL0D8,     1, 1),
+	DEF_GEN3_Z("z2",       R8A774C0_CLK_Z2,    CLK_TYPE_GEN3_Z, CLK_PLL0, 4, 8),
 	DEF_FIXED("ztr",       R8A774C0_CLK_ZTR,   CLK_PLL1,       6, 1),
 	DEF_FIXED("zt",        R8A774C0_CLK_ZT,    CLK_PLL1,       4, 1),
 	DEF_FIXED("zx",        R8A774C0_CLK_ZX,    CLK_PLL1,       3, 1),
-- 
2.11.0

Re: [PATCH v6 3/7] clk: renesas: rcar-gen3: Remove CLK_TYPE_GEN3_Z2

[Geert Uytterhoeven]

On Mon, Mar 25, 2019 at 5:36 PM Simon Horman <horms+renesas@verge.net.au> wrote:
> After recent reworking of Z and Z2 clk handling
> CLK_TYPE_GEN3_Z and CLK_TYPE_GEN3_Z2 have come to have precisely
> the same meaning. Remove this redundancy by eliminating the latter.
>
> This is not expected to have any run-time effect.
>
> As suggested by Geert Uytterhoeven.
>
> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH v6 0/7] clk: renesas: r8a77990, r8a774c0: Add Z2 clock

[Geert Uytterhoeven]

Hi Simon,

On Mon, Mar 25, 2019 at 5:36 PM Simon Horman <horms+renesas@verge.net.au> wrote:
> this series adds the Z2 clock as a clock with both a fixed and variable
> divisor with a parent of PLL0 to the CPG-MSSR drivers for the R-Car E3
> (r8a77990) and RZ/G2E (r8a774c0) SoCs.

Thanks, queued in clk-renesas-for-v5.2, after dropping the extra semicolon
in patch 1.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds