From: "Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
linux-media@vger.kernel.org
Cc: linux-renesas-soc@vger.kernel.org,
"Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>
Subject: [PATCH v2 2/2] rcar-vin: Add support for V4L2_FIELD_SEQ_{TB,BT}
Date: Thu, 10 Oct 2019 00:27:34 +0200 [thread overview]
Message-ID: <20191009222734.1911060-3-niklas.soderlund+renesas@ragnatech.se> (raw)
In-Reply-To: <20191009222734.1911060-1-niklas.soderlund+renesas@ragnatech.se>
The hardware does not support capturing the field types
V4L2_FIELD_SEQ_TB and V4L2_FIELD_SEQ_BT. To capture in these formats the
driver needs to adjust the offset of the capture buffer and capture
twice to each vb2 buffer.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
---
drivers/media/platform/rcar-vin/rcar-dma.c | 57 ++++++++++++++++++---
drivers/media/platform/rcar-vin/rcar-v4l2.c | 7 ++-
drivers/media/platform/rcar-vin/rcar-vin.h | 19 +++++++
3 files changed, 74 insertions(+), 9 deletions(-)
diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c b/drivers/media/platform/rcar-vin/rcar-dma.c
index a9fffadc268e96ba..c46f6e90627d45fd 100644
--- a/drivers/media/platform/rcar-vin/rcar-dma.c
+++ b/drivers/media/platform/rcar-vin/rcar-dma.c
@@ -534,7 +534,7 @@ static void rvin_crop_scale_comp_gen2(struct rvin_dev *vin)
/* Set scaling coefficient */
crop_height = vin->crop.height;
- if (V4L2_FIELD_IS_INTERLACED(vin->format.field))
+ if (V4L2_FIELD_HAS_BOTH(vin->format.field))
crop_height *= 2;
ys = 0;
@@ -625,6 +625,8 @@ static int rvin_setup(struct rvin_dev *vin)
case V4L2_FIELD_INTERLACED_BT:
vnmc = VNMC_IM_FULL | VNMC_FOC;
break;
+ case V4L2_FIELD_SEQ_TB:
+ case V4L2_FIELD_SEQ_BT:
case V4L2_FIELD_NONE:
vnmc = VNMC_IM_ODD_EVEN;
progressive = true;
@@ -839,15 +841,23 @@ static void rvin_fill_hw_slot(struct rvin_dev *vin, int slot)
struct rvin_buffer *buf;
struct vb2_v4l2_buffer *vbuf;
dma_addr_t phys_addr;
+ int prev;
/* A already populated slot shall never be overwritten. */
if (WARN_ON(vin->buf_hw[slot].buffer != NULL))
return;
- vin_dbg(vin, "Filling HW slot: %d\n", slot);
+ prev = (slot == 0 ? HW_BUFFER_NUM : slot) - 1;
- if (list_empty(&vin->buf_list)) {
+ if (vin->buf_hw[prev].type == HALF_TOP) {
+ vbuf = vin->buf_hw[prev].buffer;
+ vin->buf_hw[slot].buffer = vbuf;
+ vin->buf_hw[slot].type = HALF_BOTTOM;
+ phys_addr = vin->buf_hw[prev].phys + vin->format.sizeimage /
+ (vin->format.pixelformat == V4L2_PIX_FMT_NV16 ? 4 : 2);
+ } else if (list_empty(&vin->buf_list)) {
vin->buf_hw[slot].buffer = NULL;
+ vin->buf_hw[slot].type = FULL;
phys_addr = vin->scratch_phys;
} else {
/* Keep track of buffer we give to HW */
@@ -856,10 +866,18 @@ static void rvin_fill_hw_slot(struct rvin_dev *vin, int slot)
list_del_init(to_buf_list(vbuf));
vin->buf_hw[slot].buffer = vbuf;
+ vin->buf_hw[slot].type =
+ V4L2_FIELD_IS_SEQUENTIAL(vin->format.field) ?
+ HALF_TOP : FULL;
+
/* Setup DMA */
phys_addr = vb2_dma_contig_plane_dma_addr(&vbuf->vb2_buf, 0);
}
+ vin_dbg(vin, "Filling HW slot: %d type: %d buffer: %p\n",
+ slot, vin->buf_hw[slot].type, vin->buf_hw[slot].buffer);
+
+ vin->buf_hw[slot].phys = phys_addr;
rvin_set_slot_addr(vin, slot, phys_addr);
}
@@ -867,6 +885,11 @@ static int rvin_capture_start(struct rvin_dev *vin)
{
int slot, ret;
+ for (slot = 0; slot < HW_BUFFER_NUM; slot++) {
+ vin->buf_hw[slot].buffer = NULL;
+ vin->buf_hw[slot].type = FULL;
+ }
+
for (slot = 0; slot < HW_BUFFER_NUM; slot++)
rvin_fill_hw_slot(vin, slot);
@@ -951,6 +974,16 @@ static irqreturn_t rvin_irq(int irq, void *data)
/* Capture frame */
if (vin->buf_hw[slot].buffer) {
+ /*
+ * Nothing to do but refill the hardware slot if
+ * capture only filled first half of vb2 buffer.
+ */
+ if (vin->buf_hw[slot].type == HALF_TOP) {
+ vin->buf_hw[slot].buffer = NULL;
+ rvin_fill_hw_slot(vin, slot);
+ goto done;
+ }
+
vin->buf_hw[slot].buffer->field =
rvin_get_active_field(vin, vnms);
vin->buf_hw[slot].buffer->sequence = vin->sequence;
@@ -978,14 +1011,22 @@ static void return_all_buffers(struct rvin_dev *vin,
enum vb2_buffer_state state)
{
struct rvin_buffer *buf, *node;
- int i;
+ struct vb2_v4l2_buffer *freed[HW_BUFFER_NUM];
+ unsigned int i, n;
for (i = 0; i < HW_BUFFER_NUM; i++) {
- if (vin->buf_hw[i].buffer) {
- vb2_buffer_done(&vin->buf_hw[i].buffer->vb2_buf,
- state);
- vin->buf_hw[i].buffer = NULL;
+ freed[i] = vin->buf_hw[i].buffer;
+ vin->buf_hw[i].buffer = NULL;
+
+ for (n = 0; n < i; n++) {
+ if (freed[i] == freed[n]) {
+ freed[i] = NULL;
+ break;
+ }
}
+
+ if (freed[i])
+ vb2_buffer_done(&freed[i]->vb2_buf, state);
}
list_for_each_entry_safe(buf, node, &vin->buf_list, list) {
diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c b/drivers/media/platform/rcar-vin/rcar-v4l2.c
index 9a9b89c0dc0b3be4..cbdb0a43aa439830 100644
--- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
+++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
@@ -90,7 +90,10 @@ static u32 rvin_format_bytesperline(struct rvin_dev *vin,
if (WARN_ON(!fmt))
return -EINVAL;
- align = pix->pixelformat == V4L2_PIX_FMT_NV16 ? 0x20 : 0x10;
+ if (V4L2_FIELD_IS_SEQUENTIAL(pix->field))
+ align = 0x80;
+ else
+ align = pix->pixelformat == V4L2_PIX_FMT_NV16 ? 0x20 : 0x10;
return ALIGN(pix->width, align) * fmt->bpp;
}
@@ -118,6 +121,8 @@ static void rvin_format_align(struct rvin_dev *vin, struct v4l2_pix_format *pix)
case V4L2_FIELD_INTERLACED_BT:
case V4L2_FIELD_INTERLACED:
case V4L2_FIELD_ALTERNATE:
+ case V4L2_FIELD_SEQ_TB:
+ case V4L2_FIELD_SEQ_BT:
break;
default:
pix->field = RVIN_DEFAULT_FIELD;
diff --git a/drivers/media/platform/rcar-vin/rcar-vin.h b/drivers/media/platform/rcar-vin/rcar-vin.h
index 9031fe7f569b908e..8d48894bc49e4db6 100644
--- a/drivers/media/platform/rcar-vin/rcar-vin.h
+++ b/drivers/media/platform/rcar-vin/rcar-vin.h
@@ -60,6 +60,23 @@ enum rvin_dma_state {
STOPPING,
};
+/**
+ * enum rvin_buffer_type
+ *
+ * Describes how a buffer is given to the hardware. To be able
+ * to capture SEQ_TB/BT it's needed to capture to the same vb2
+ * buffer twice so the type of buffer needs to be kept.
+ *
+ * FULL - One capture fills the whole vb2 buffer
+ * HALF_TOP- One capture fills the top half of the vb2 buffer
+ * HALF_BOTTOM - One capture fills the bottom half of the vb2 buffer
+ */
+enum rvin_buffer_type {
+ FULL,
+ HALF_TOP,
+ HALF_BOTTOM,
+};
+
/**
* struct rvin_video_format - Data format stored in memory
* @fourcc: Pixelformat
@@ -204,6 +221,8 @@ struct rvin_dev {
spinlock_t qlock;
struct {
struct vb2_v4l2_buffer *buffer;
+ enum rvin_buffer_type type;
+ dma_addr_t phys;
} buf_hw[HW_BUFFER_NUM];
struct list_head buf_list;
unsigned int sequence;
--
2.23.0
next prev parent reply other threads:[~2019-10-09 22:27 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-09 22:27 [PATCH v2 0/2] rcar-vin: Support V4L2_FIELD_SEQ_{TB,BT} Niklas Söderlund
2019-10-09 22:27 ` [PATCH v2 1/2] rcar-vin: Move hardware buffer tracking to own struct Niklas Söderlund
2019-10-09 22:27 ` Niklas Söderlund [this message]
2019-11-09 11:46 ` [PATCH v2 2/2] rcar-vin: Add support for V4L2_FIELD_SEQ_{TB,BT} Hans Verkuil
2019-11-12 11:53 ` Jacopo Mondi
2019-12-10 2:05 ` Niklas Söderlund
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191009222734.1911060-3-niklas.soderlund+renesas@ragnatech.se \
--to=niklas.soderlund+renesas@ragnatech.se \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).