Linux-Renesas-SoC Archive on lore.kernel.org
 help / color / Atom feed
From: Hans Verkuil <hverkuil@xs4all.nl>
To: "Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>,
	"Laurent Pinchart" <laurent.pinchart@ideasonboard.com>,
	linux-media@vger.kernel.org
Cc: linux-renesas-soc@vger.kernel.org
Subject: Re: [PATCH v2 2/2] rcar-vin: Add support for V4L2_FIELD_SEQ_{TB,BT}
Date: Sat, 9 Nov 2019 12:46:24 +0100
Message-ID: <64a0d5eb-39ca-2087-a493-30ac5ce70519@xs4all.nl> (raw)
In-Reply-To: <20191009222734.1911060-3-niklas.soderlund+renesas@ragnatech.se>

Hi Niklas,

On 10/10/19 12:27 AM, Niklas Söderlund wrote:
> The hardware does not support capturing the field types
> V4L2_FIELD_SEQ_TB and V4L2_FIELD_SEQ_BT. To capture in these formats the
> driver needs to adjust the offset of the capture buffer and capture
> twice to each vb2 buffer.

This patch no longer applies to the master branch. Can you rebase?

This series looks good to me otherwise.

Regards,

	Hans

> 
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> ---
>  drivers/media/platform/rcar-vin/rcar-dma.c  | 57 ++++++++++++++++++---
>  drivers/media/platform/rcar-vin/rcar-v4l2.c |  7 ++-
>  drivers/media/platform/rcar-vin/rcar-vin.h  | 19 +++++++
>  3 files changed, 74 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c b/drivers/media/platform/rcar-vin/rcar-dma.c
> index a9fffadc268e96ba..c46f6e90627d45fd 100644
> --- a/drivers/media/platform/rcar-vin/rcar-dma.c
> +++ b/drivers/media/platform/rcar-vin/rcar-dma.c
> @@ -534,7 +534,7 @@ static void rvin_crop_scale_comp_gen2(struct rvin_dev *vin)
>  
>  	/* Set scaling coefficient */
>  	crop_height = vin->crop.height;
> -	if (V4L2_FIELD_IS_INTERLACED(vin->format.field))
> +	if (V4L2_FIELD_HAS_BOTH(vin->format.field))
>  		crop_height *= 2;
>  
>  	ys = 0;
> @@ -625,6 +625,8 @@ static int rvin_setup(struct rvin_dev *vin)
>  	case V4L2_FIELD_INTERLACED_BT:
>  		vnmc = VNMC_IM_FULL | VNMC_FOC;
>  		break;
> +	case V4L2_FIELD_SEQ_TB:
> +	case V4L2_FIELD_SEQ_BT:
>  	case V4L2_FIELD_NONE:
>  		vnmc = VNMC_IM_ODD_EVEN;
>  		progressive = true;
> @@ -839,15 +841,23 @@ static void rvin_fill_hw_slot(struct rvin_dev *vin, int slot)
>  	struct rvin_buffer *buf;
>  	struct vb2_v4l2_buffer *vbuf;
>  	dma_addr_t phys_addr;
> +	int prev;
>  
>  	/* A already populated slot shall never be overwritten. */
>  	if (WARN_ON(vin->buf_hw[slot].buffer != NULL))
>  		return;
>  
> -	vin_dbg(vin, "Filling HW slot: %d\n", slot);
> +	prev = (slot == 0 ? HW_BUFFER_NUM : slot) - 1;
>  
> -	if (list_empty(&vin->buf_list)) {
> +	if (vin->buf_hw[prev].type == HALF_TOP) {
> +		vbuf = vin->buf_hw[prev].buffer;
> +		vin->buf_hw[slot].buffer = vbuf;
> +		vin->buf_hw[slot].type = HALF_BOTTOM;
> +		phys_addr = vin->buf_hw[prev].phys + vin->format.sizeimage /
> +			(vin->format.pixelformat == V4L2_PIX_FMT_NV16 ? 4 : 2);
> +	} else if (list_empty(&vin->buf_list)) {
>  		vin->buf_hw[slot].buffer = NULL;
> +		vin->buf_hw[slot].type = FULL;
>  		phys_addr = vin->scratch_phys;
>  	} else {
>  		/* Keep track of buffer we give to HW */
> @@ -856,10 +866,18 @@ static void rvin_fill_hw_slot(struct rvin_dev *vin, int slot)
>  		list_del_init(to_buf_list(vbuf));
>  		vin->buf_hw[slot].buffer = vbuf;
>  
> +		vin->buf_hw[slot].type =
> +			V4L2_FIELD_IS_SEQUENTIAL(vin->format.field) ?
> +			HALF_TOP : FULL;
> +
>  		/* Setup DMA */
>  		phys_addr = vb2_dma_contig_plane_dma_addr(&vbuf->vb2_buf, 0);
>  	}
>  
> +	vin_dbg(vin, "Filling HW slot: %d type: %d buffer: %p\n",
> +		slot, vin->buf_hw[slot].type, vin->buf_hw[slot].buffer);
> +
> +	vin->buf_hw[slot].phys = phys_addr;
>  	rvin_set_slot_addr(vin, slot, phys_addr);
>  }
>  
> @@ -867,6 +885,11 @@ static int rvin_capture_start(struct rvin_dev *vin)
>  {
>  	int slot, ret;
>  
> +	for (slot = 0; slot < HW_BUFFER_NUM; slot++) {
> +		vin->buf_hw[slot].buffer = NULL;
> +		vin->buf_hw[slot].type = FULL;
> +	}
> +
>  	for (slot = 0; slot < HW_BUFFER_NUM; slot++)
>  		rvin_fill_hw_slot(vin, slot);
>  
> @@ -951,6 +974,16 @@ static irqreturn_t rvin_irq(int irq, void *data)
>  
>  	/* Capture frame */
>  	if (vin->buf_hw[slot].buffer) {
> +		/*
> +		 * Nothing to do but refill the hardware slot if
> +		 * capture only filled first half of vb2 buffer.
> +		 */
> +		if (vin->buf_hw[slot].type == HALF_TOP) {
> +			vin->buf_hw[slot].buffer = NULL;
> +			rvin_fill_hw_slot(vin, slot);
> +			goto done;
> +		}
> +
>  		vin->buf_hw[slot].buffer->field =
>  			rvin_get_active_field(vin, vnms);
>  		vin->buf_hw[slot].buffer->sequence = vin->sequence;
> @@ -978,14 +1011,22 @@ static void return_all_buffers(struct rvin_dev *vin,
>  			       enum vb2_buffer_state state)
>  {
>  	struct rvin_buffer *buf, *node;
> -	int i;
> +	struct vb2_v4l2_buffer *freed[HW_BUFFER_NUM];
> +	unsigned int i, n;
>  
>  	for (i = 0; i < HW_BUFFER_NUM; i++) {
> -		if (vin->buf_hw[i].buffer) {
> -			vb2_buffer_done(&vin->buf_hw[i].buffer->vb2_buf,
> -					state);
> -			vin->buf_hw[i].buffer = NULL;
> +		freed[i] = vin->buf_hw[i].buffer;
> +		vin->buf_hw[i].buffer = NULL;
> +
> +		for (n = 0; n < i; n++) {
> +			if (freed[i] == freed[n]) {
> +				freed[i] = NULL;
> +				break;
> +			}
>  		}
> +
> +		if (freed[i])
> +			vb2_buffer_done(&freed[i]->vb2_buf, state);
>  	}
>  
>  	list_for_each_entry_safe(buf, node, &vin->buf_list, list) {
> diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c b/drivers/media/platform/rcar-vin/rcar-v4l2.c
> index 9a9b89c0dc0b3be4..cbdb0a43aa439830 100644
> --- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
> +++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
> @@ -90,7 +90,10 @@ static u32 rvin_format_bytesperline(struct rvin_dev *vin,
>  	if (WARN_ON(!fmt))
>  		return -EINVAL;
>  
> -	align = pix->pixelformat == V4L2_PIX_FMT_NV16 ? 0x20 : 0x10;
> +	if (V4L2_FIELD_IS_SEQUENTIAL(pix->field))
> +		align = 0x80;
> +	else
> +		align = pix->pixelformat == V4L2_PIX_FMT_NV16 ? 0x20 : 0x10;
>  
>  	return ALIGN(pix->width, align) * fmt->bpp;
>  }
> @@ -118,6 +121,8 @@ static void rvin_format_align(struct rvin_dev *vin, struct v4l2_pix_format *pix)
>  	case V4L2_FIELD_INTERLACED_BT:
>  	case V4L2_FIELD_INTERLACED:
>  	case V4L2_FIELD_ALTERNATE:
> +	case V4L2_FIELD_SEQ_TB:
> +	case V4L2_FIELD_SEQ_BT:
>  		break;
>  	default:
>  		pix->field = RVIN_DEFAULT_FIELD;
> diff --git a/drivers/media/platform/rcar-vin/rcar-vin.h b/drivers/media/platform/rcar-vin/rcar-vin.h
> index 9031fe7f569b908e..8d48894bc49e4db6 100644
> --- a/drivers/media/platform/rcar-vin/rcar-vin.h
> +++ b/drivers/media/platform/rcar-vin/rcar-vin.h
> @@ -60,6 +60,23 @@ enum rvin_dma_state {
>  	STOPPING,
>  };
>  
> +/**
> + * enum rvin_buffer_type
> + *
> + * Describes how a buffer is given to the hardware. To be able
> + * to capture SEQ_TB/BT it's needed to capture to the same vb2
> + * buffer twice so the type of buffer needs to be kept.
> + *
> + * FULL - One capture fills the whole vb2 buffer
> + * HALF_TOP- One capture fills the top half of the vb2 buffer
> + * HALF_BOTTOM - One capture fills the bottom half of the vb2 buffer
> + */
> +enum rvin_buffer_type {
> +	FULL,
> +	HALF_TOP,
> +	HALF_BOTTOM,
> +};
> +
>  /**
>   * struct rvin_video_format - Data format stored in memory
>   * @fourcc:	Pixelformat
> @@ -204,6 +221,8 @@ struct rvin_dev {
>  	spinlock_t qlock;
>  	struct {
>  		struct vb2_v4l2_buffer *buffer;
> +		enum rvin_buffer_type type;
> +		dma_addr_t phys;
>  	} buf_hw[HW_BUFFER_NUM];
>  	struct list_head buf_list;
>  	unsigned int sequence;
> 


  reply index

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-09 22:27 [PATCH v2 0/2] rcar-vin: Support V4L2_FIELD_SEQ_{TB,BT} Niklas Söderlund
2019-10-09 22:27 ` [PATCH v2 1/2] rcar-vin: Move hardware buffer tracking to own struct Niklas Söderlund
2019-10-09 22:27 ` [PATCH v2 2/2] rcar-vin: Add support for V4L2_FIELD_SEQ_{TB,BT} Niklas Söderlund
2019-11-09 11:46   ` Hans Verkuil [this message]
2019-11-12 11:53   ` Jacopo Mondi

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=64a0d5eb-39ca-2087-a493-30ac5ce70519@xs4all.nl \
    --to=hverkuil@xs4all.nl \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=niklas.soderlund+renesas@ragnatech.se \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Renesas-SoC Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-renesas-soc/0 linux-renesas-soc/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-renesas-soc linux-renesas-soc/ https://lore.kernel.org/linux-renesas-soc \
		linux-renesas-soc@vger.kernel.org
	public-inbox-index linux-renesas-soc

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-renesas-soc


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git