* [PATCH] mmc: sh_mmcif: Use "kHz" for kilohertz
@ 2020-06-18 8:03 Geert Uytterhoeven
2020-07-06 14:48 ` Ulf Hansson
2020-07-06 14:50 ` Wolfram Sang
0 siblings, 2 replies; 3+ messages in thread
From: Geert Uytterhoeven @ 2020-06-18 8:03 UTC (permalink / raw)
To: Ulf Hansson
Cc: Wolfram Sang, linux-mmc, linux-renesas-soc, Geert Uytterhoeven
"K" stands for "kelvin".
While at it, make the spacing before units consistent.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
drivers/mmc/host/sh_mmcif.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c
index 7e1fd557109c0476..9f53634aa41184c8 100644
--- a/drivers/mmc/host/sh_mmcif.c
+++ b/drivers/mmc/host/sh_mmcif.c
@@ -191,9 +191,9 @@
STS2_AC12BSYTO | STS2_RSPBSYTO | \
STS2_AC12RSPTO | STS2_RSPTO)
-#define CLKDEV_EMMC_DATA 52000000 /* 52MHz */
-#define CLKDEV_MMC_DATA 20000000 /* 20MHz */
-#define CLKDEV_INIT 400000 /* 400 KHz */
+#define CLKDEV_EMMC_DATA 52000000 /* 52 MHz */
+#define CLKDEV_MMC_DATA 20000000 /* 20 MHz */
+#define CLKDEV_INIT 400000 /* 400 kHz */
enum sh_mmcif_state {
STATE_IDLE,
--
2.17.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] mmc: sh_mmcif: Use "kHz" for kilohertz
2020-06-18 8:03 [PATCH] mmc: sh_mmcif: Use "kHz" for kilohertz Geert Uytterhoeven
@ 2020-07-06 14:48 ` Ulf Hansson
2020-07-06 14:50 ` Wolfram Sang
1 sibling, 0 replies; 3+ messages in thread
From: Ulf Hansson @ 2020-07-06 14:48 UTC (permalink / raw)
To: Geert Uytterhoeven; +Cc: Wolfram Sang, linux-mmc, Linux-Renesas
On Thu, 18 Jun 2020 at 10:03, Geert Uytterhoeven
<geert+renesas@glider.be> wrote:
>
> "K" stands for "kelvin".
>
> While at it, make the spacing before units consistent.
>
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Applied for next, thanks!
Kind regards
Uffe
> ---
> drivers/mmc/host/sh_mmcif.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c
> index 7e1fd557109c0476..9f53634aa41184c8 100644
> --- a/drivers/mmc/host/sh_mmcif.c
> +++ b/drivers/mmc/host/sh_mmcif.c
> @@ -191,9 +191,9 @@
> STS2_AC12BSYTO | STS2_RSPBSYTO | \
> STS2_AC12RSPTO | STS2_RSPTO)
>
> -#define CLKDEV_EMMC_DATA 52000000 /* 52MHz */
> -#define CLKDEV_MMC_DATA 20000000 /* 20MHz */
> -#define CLKDEV_INIT 400000 /* 400 KHz */
> +#define CLKDEV_EMMC_DATA 52000000 /* 52 MHz */
> +#define CLKDEV_MMC_DATA 20000000 /* 20 MHz */
> +#define CLKDEV_INIT 400000 /* 400 kHz */
>
> enum sh_mmcif_state {
> STATE_IDLE,
> --
> 2.17.1
>
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] mmc: sh_mmcif: Use "kHz" for kilohertz
2020-06-18 8:03 [PATCH] mmc: sh_mmcif: Use "kHz" for kilohertz Geert Uytterhoeven
2020-07-06 14:48 ` Ulf Hansson
@ 2020-07-06 14:50 ` Wolfram Sang
1 sibling, 0 replies; 3+ messages in thread
From: Wolfram Sang @ 2020-07-06 14:50 UTC (permalink / raw)
To: Geert Uytterhoeven; +Cc: Ulf Hansson, linux-mmc, linux-renesas-soc
[-- Attachment #1: Type: text/plain, Size: 292 bytes --]
On Thu, Jun 18, 2020 at 10:03:21AM +0200, Geert Uytterhoeven wrote:
> "K" stands for "kelvin".
>
> While at it, make the spacing before units consistent.
>
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2020-07-06 14:51 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-06-18 8:03 [PATCH] mmc: sh_mmcif: Use "kHz" for kilohertz Geert Uytterhoeven
2020-07-06 14:48 ` Ulf Hansson
2020-07-06 14:50 ` Wolfram Sang
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).