From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
To: linux-media@vger.kernel.org
Cc: linux-renesas-soc@vger.kernel.org,
"Jacopo Mondi" <jacopo+renesas@jmondi.org>,
"Kieran Bingham" <kieran.bingham+renesas@ideasonboard.com>,
"Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>,
"Ramesh Shanmugasundaram" <rashanmu@gmail.com>,
"Sakari Ailus" <sakari.ailus@linux.intel.com>,
"Steve Longerbeam" <slongerbeam@gmail.com>
Subject: [PATCH 4/5] media: rcar-csi2: Allocate v4l2_async_subdev dynamically
Date: Tue, 11 Aug 2020 23:59:38 +0300 [thread overview]
Message-ID: <20200811205939.19550-5-laurent.pinchart+renesas@ideasonboard.com> (raw)
In-Reply-To: <20200811205939.19550-1-laurent.pinchart+renesas@ideasonboard.com>
v4l2_async_notifier_add_subdev() requires the asd to be allocated
dynamically, but the rcar-csi2 driver embeds it in the rcar_csi2
structure. This causes memory corruption when the notifier is destroyed
at remove time with v4l2_async_notifier_cleanup().
Fix this issue by registering the asd with
v4l2_async_notifier_add_fwnode_subdev(), which allocates it dynamically
internally.
Fixes: 769afd212b16 ("media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver driver")
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
drivers/media/platform/rcar-vin/rcar-csi2.c | 24 +++++++++------------
1 file changed, 10 insertions(+), 14 deletions(-)
diff --git a/drivers/media/platform/rcar-vin/rcar-csi2.c b/drivers/media/platform/rcar-vin/rcar-csi2.c
index c6cc4f473a07..a16c492b3143 100644
--- a/drivers/media/platform/rcar-vin/rcar-csi2.c
+++ b/drivers/media/platform/rcar-vin/rcar-csi2.c
@@ -362,7 +362,6 @@ struct rcar_csi2 {
struct media_pad pads[NR_OF_RCAR_CSI2_PAD];
struct v4l2_async_notifier notifier;
- struct v4l2_async_subdev asd;
struct v4l2_subdev *remote;
struct v4l2_mbus_framefmt mf;
@@ -811,6 +810,8 @@ static int rcsi2_parse_v4l2(struct rcar_csi2 *priv,
static int rcsi2_parse_dt(struct rcar_csi2 *priv)
{
+ struct v4l2_async_subdev *asd;
+ struct fwnode_handle *fwnode;
struct device_node *ep;
struct v4l2_fwnode_endpoint v4l2_ep = { .bus_type = 0 };
int ret;
@@ -834,24 +835,19 @@ static int rcsi2_parse_dt(struct rcar_csi2 *priv)
return ret;
}
- priv->asd.match.fwnode =
- fwnode_graph_get_remote_endpoint(of_fwnode_handle(ep));
- priv->asd.match_type = V4L2_ASYNC_MATCH_FWNODE;
-
+ fwnode = fwnode_graph_get_remote_endpoint(of_fwnode_handle(ep));
of_node_put(ep);
+ dev_dbg(priv->dev, "Found '%pOF'\n", to_of_node(fwnode));
+
v4l2_async_notifier_init(&priv->notifier);
-
- ret = v4l2_async_notifier_add_subdev(&priv->notifier, &priv->asd);
- if (ret) {
- fwnode_handle_put(priv->asd.match.fwnode);
- return ret;
- }
-
priv->notifier.ops = &rcar_csi2_notify_ops;
- dev_dbg(priv->dev, "Found '%pOF'\n",
- to_of_node(priv->asd.match.fwnode));
+ asd = v4l2_async_notifier_add_fwnode_subdev(&priv->notifier, fwnode,
+ sizeof(*asd));
+ fwnode_handle_put(fwnode);
+ if (IS_ERR(asd))
+ return PTR_ERR(asd);
ret = v4l2_async_subdev_notifier_register(&priv->subdev,
&priv->notifier);
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2020-08-11 21:00 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-11 20:59 [PATCH 0/5] media: Fix asd dynamic allocation Laurent Pinchart
2020-08-11 20:59 ` [PATCH 1/5] media: v4l2-async: Document asd allocation requirements Laurent Pinchart
2020-09-08 5:08 ` Laurent Pinchart
2020-09-16 15:44 ` Kieran Bingham
2020-08-11 20:59 ` [PATCH 2/5] media: rcar_drif: Fix fwnode reference leak when parsing DT Laurent Pinchart
2020-09-16 15:46 ` Kieran Bingham
2020-08-11 20:59 ` [PATCH 3/5] media: rcar_drif: Allocate v4l2_async_subdev dynamically Laurent Pinchart
2020-09-16 15:53 ` Kieran Bingham
2020-08-11 20:59 ` Laurent Pinchart [this message]
2020-08-11 21:43 ` [PATCH 4/5] media: rcar-csi2: " Niklas Söderlund
2020-08-11 22:14 ` Laurent Pinchart
2020-08-11 20:59 ` [PATCH 5/5] media: i2c: max9286: " Laurent Pinchart
2020-09-08 5:08 ` Laurent Pinchart
2020-09-14 12:55 ` Jacopo Mondi
2020-08-31 19:44 ` [PATCH 0/5] media: Fix asd dynamic allocation Ramesh Shanmugasundaram
2020-09-01 10:46 ` Chris Paterson
2020-09-10 15:53 ` Fabrizio Castro
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200811205939.19550-5-laurent.pinchart+renesas@ideasonboard.com \
--to=laurent.pinchart+renesas@ideasonboard.com \
--cc=jacopo+renesas@jmondi.org \
--cc=kieran.bingham+renesas@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=niklas.soderlund+renesas@ragnatech.se \
--cc=rashanmu@gmail.com \
--cc=sakari.ailus@linux.intel.com \
--cc=slongerbeam@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).