* [PATCH v5] dt-bindings: media: mt9v111: Convert to json-schema
@ 2020-09-10 16:19 Jacopo Mondi
2020-09-15 20:09 ` Rob Herring
0 siblings, 1 reply; 2+ messages in thread
From: Jacopo Mondi @ 2020-09-10 16:19 UTC (permalink / raw)
To: robh+dt, devicetree, linux-media
Cc: Jacopo Mondi, mchehab, sakari.ailus, hverkuil-cisco,
laurent.pinchart, linux-renesas-soc
Convert the mt9v111 bindings document to json-schema and update
the MAINTAINERS file accordingly.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
---
v4->v5:
- No changes, sent separately as other patches in the series have been
under discussion while I think this one could be collected as is.
---
.../bindings/media/i2c/aptina,mt9v111.txt | 46 ------------
.../bindings/media/i2c/aptina,mt9v111.yaml | 75 +++++++++++++++++++
MAINTAINERS | 2 +-
3 files changed, 76 insertions(+), 47 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.txt
create mode 100644 Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml
diff --git a/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.txt b/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.txt
deleted file mode 100644
index bd896e9f67d1..000000000000
--- a/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-* Aptina MT9V111 CMOS sensor
-----------------------------
-
-The Aptina MT9V111 is a 1/4-Inch VGA-format digital image sensor with a core
-based on Aptina MT9V011 sensor and an integrated Image Flow Processor (IFP).
-
-The sensor has an active pixel array of 640x480 pixels and can output a number
-of image resolution and formats controllable through a simple two-wires
-interface.
-
-Required properties:
---------------------
-
-- compatible: shall be "aptina,mt9v111".
-- clocks: reference to the system clock input provider.
-
-Optional properties:
---------------------
-
-- enable-gpios: output enable signal, pin name "OE#". Active low.
-- standby-gpios: low power state control signal, pin name "STANDBY".
- Active high.
-- reset-gpios: chip reset signal, pin name "RESET#". Active low.
-
-The device node must contain one 'port' child node with one 'endpoint' child
-sub-node for its digital output video port, in accordance with the video
-interface bindings defined in:
-Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Example:
---------
-
- &i2c1 {
- camera@48 {
- compatible = "aptina,mt9v111";
- reg = <0x48>;
-
- clocks = <&camera_clk>;
-
- port {
- mt9v111_out: endpoint {
- remote-endpoint = <&ceu_in>;
- };
- };
- };
- };
diff --git a/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml b/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml
new file mode 100644
index 000000000000..ff9546e95d05
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/aptina,mt9v111.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aptina MT9V111 CMOS sensor
+
+maintainers:
+ - Jacopo Mondi <jacopo@jmondi.org>
+
+description: |
+ The Aptina MT9V111 is a 1/4-Inch VGA-format digital image sensor with a core
+ based on Aptina MT9V011 sensor and an integrated Image Flow Processor (IFP).
+
+ The sensor has an active pixel array of 640x480 pixels and can output a number
+ of image resolutions and formats controllable through a simple two-wires
+ interface.
+
+properties:
+ compatible:
+ const: aptina,mt9v111
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ enable-gpios:
+ description: Enable signal, pin name "OE#". Active low.
+ maxItems: 1
+
+ standby-gpios:
+ description: |
+ Low power state control signal, pin name "STANDBY". Active high.
+ maxItems: 1
+
+ reset-gpios:
+ description: Chip reset signal, pin name "RESET#". Active low.
+ maxItems: 1
+
+ port:
+ type: object
+ description: |
+ Output video port. See ../video-interfaces.txt.
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ camera@48 {
+ compatible = "aptina,mt9v111";
+ reg = <0x48>;
+ clocks = <&camera_clk>;
+
+ port {
+ mt9v111_out: endpoint {
+ remote-endpoint = <&ceu_in>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index 4e68598c16fa..355f9c04b56b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11823,7 +11823,7 @@ M: Jacopo Mondi <jacopo@jmondi.org>
L: linux-media@vger.kernel.org
S: Maintained
T: git git://linuxtv.org/media_tree.git
-F: Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.txt
+F: Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml
F: drivers/media/i2c/mt9v111.c
MULTIFUNCTION DEVICES (MFD)
--
2.28.0
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH v5] dt-bindings: media: mt9v111: Convert to json-schema
2020-09-10 16:19 [PATCH v5] dt-bindings: media: mt9v111: Convert to json-schema Jacopo Mondi
@ 2020-09-15 20:09 ` Rob Herring
0 siblings, 0 replies; 2+ messages in thread
From: Rob Herring @ 2020-09-15 20:09 UTC (permalink / raw)
To: Jacopo Mondi
Cc: linux-media, mchehab, devicetree, robh+dt, sakari.ailus,
hverkuil-cisco, linux-renesas-soc, laurent.pinchart
On Thu, 10 Sep 2020 18:19:49 +0200, Jacopo Mondi wrote:
> Convert the mt9v111 bindings document to json-schema and update
> the MAINTAINERS file accordingly.
>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> ---
> v4->v5:
> - No changes, sent separately as other patches in the series have been
> under discussion while I think this one could be collected as is.
>
> ---
> .../bindings/media/i2c/aptina,mt9v111.txt | 46 ------------
> .../bindings/media/i2c/aptina,mt9v111.yaml | 75 +++++++++++++++++++
> MAINTAINERS | 2 +-
> 3 files changed, 76 insertions(+), 47 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.txt
> create mode 100644 Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml
>
Reviewed-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-09-15 20:09 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-09-10 16:19 [PATCH v5] dt-bindings: media: mt9v111: Convert to json-schema Jacopo Mondi
2020-09-15 20:09 ` Rob Herring
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).