[PATCH] ARM: dts: r8a7742-iwg21d-q7-dbcm-ca: Add can0 support to camera DB

[PATCH] ARM: dts: r8a7742-iwg21d-q7-dbcm-ca: Add can0 support to camera DB

[Lad Prabhakar]

This patch enables CAN0 interface exposed through connector J4 on the
camera DB.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
---
 arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
index 1479ced50873..961c0f2eeefb 100644
--- a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
@@ -27,6 +27,12 @@
 	status = "disabled";
 };
 
+&can0 {
+	pinctrl-0 = <&can0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
 &ether {
 	pinctrl-0 = <&ether_pins>;
 	pinctrl-names = "default";
@@ -49,6 +55,11 @@
 };
 
 &pfc {
+	can0_pins: can0 {
+		groups = "can0_data_d";
+		function = "can0";
+	};
+
 	ether_pins: ether {
 		groups = "eth_mdio", "eth_rmii";
 		function = "eth";
-- 
2.17.1

Re: [PATCH] ARM: dts: r8a7742-iwg21d-q7-dbcm-ca: Add can0 support to camera DB

[Geert Uytterhoeven]

On Fri, Sep 11, 2020 at 10:36 AM Lad Prabhakar
<prabhakar.mahadev-lad.rj@bp.renesas.com> wrote:
> This patch enables CAN0 interface exposed through connector J4 on the
> camera DB.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
i.e. will queue in renesas-devel for v5.10.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds