From: Biju Das <biju.das.jz@bp.renesas.com>
To: Vinod Koul <vkoul@kernel.org>, Rob Herring <robh+dt@kernel.org>
Cc: Biju Das <biju.das.jz@bp.renesas.com>,
Chris Brandt <chris.brandt@renesas.com>,
dmaengine@vger.kernel.org, devicetree@vger.kernel.org,
Geert Uytterhoeven <geert+renesas@glider.be>,
Chris Paterson <Chris.Paterson2@renesas.com>,
Prabhakar Mahadev Lad <prabhakar.mahadev-lad.rj@bp.renesas.com>,
linux-renesas-soc@vger.kernel.org
Subject: [PATCH v5 1/3] dt-bindings: dma: Document RZ/G2L bindings
Date: Thu, 29 Jul 2021 09:25:18 +0100 [thread overview]
Message-ID: <20210729082520.26186-2-biju.das.jz@bp.renesas.com> (raw)
In-Reply-To: <20210729082520.26186-1-biju.das.jz@bp.renesas.com>
Document RZ/G2L DMAC bindings.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
Note:-
This base series for this patch is Linux 5.14-rc2(or +) otherwise bots would
complain about check failures
v4->v5:
* Passing legacy slave channel configuration parameters using dmaengine_slave_config is prohibited.
So started passing this parameters in DT instead, by encoding MID/RID values with channel parameters
in the #dma-cells.
* Updated the description for #dma-cells
* Removed Rb tag's of Geert and Rob since there is a modification in binding patch
v3->v4:
* Added Rob's Rb tag
* Described clocks and reset properties
v2->v3:
* Added error interrupt first.
* Updated clock and reset maxitems.
* Added Geert's Rb tag.
v1->v2:
* Made interrupt names in defined order
* Removed src address and channel configuration from dma-cells.
* Changed the compatibele string to "renesas,r9a07g044-dmac".
v1:-
* https://patchwork.kernel.org/project/linux-renesas-soc/patch/20210611113642.18457-2-biju.das.jz@bp.renesas.com/
---
---
.../bindings/dma/renesas,rz-dmac.yaml | 130 ++++++++++++++++++
1 file changed, 130 insertions(+)
create mode 100644 Documentation/devicetree/bindings/dma/renesas,rz-dmac.yaml
diff --git a/Documentation/devicetree/bindings/dma/renesas,rz-dmac.yaml b/Documentation/devicetree/bindings/dma/renesas,rz-dmac.yaml
new file mode 100644
index 000000000000..7a4f415d74dc
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/renesas,rz-dmac.yaml
@@ -0,0 +1,130 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/renesas,rz-dmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/G2L DMA Controller
+
+maintainers:
+ - Biju Das <biju.das.jz@bp.renesas.com>
+
+allOf:
+ - $ref: "dma-controller.yaml#"
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - renesas,r9a07g044-dmac # RZ/G2{L,LC}
+ - const: renesas,rz-dmac
+
+ reg:
+ items:
+ - description: Control and channel register block
+ - description: DMA extended resource selector block
+
+ interrupts:
+ maxItems: 17
+
+ interrupt-names:
+ items:
+ - const: error
+ - const: ch0
+ - const: ch1
+ - const: ch2
+ - const: ch3
+ - const: ch4
+ - const: ch5
+ - const: ch6
+ - const: ch7
+ - const: ch8
+ - const: ch9
+ - const: ch10
+ - const: ch11
+ - const: ch12
+ - const: ch13
+ - const: ch14
+ - const: ch15
+
+ clocks:
+ items:
+ - description: DMA main clock
+ - description: DMA register access clock
+
+ '#dma-cells':
+ const: 1
+ description:
+ The cell specifies the encoded MID/RID values of the DMAC port
+ connected to the DMA client and the slave channel configuration
+ parameters.
+ bits[0:9] - Specifies MID/RID value
+ bit[10] - Specifies DMA request high enable (HIEN)
+ bit[11] - Specifies DMA request detection type (LVL)
+ bits[12:14] - Specifies DMAACK output mode (AM)
+ bit[15] - Specifies Transfer Mode (TM)
+
+ dma-channels:
+ const: 16
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ items:
+ - description: Reset for DMA ARESETN reset terminal
+ - description: Reset for DMA RST_ASYNC reset terminal
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+ - clocks
+ - '#dma-cells'
+ - dma-channels
+ - power-domains
+ - resets
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/r9a07g044-cpg.h>
+
+ dmac: dma-controller@11820000 {
+ compatible = "renesas,r9a07g044-dmac",
+ "renesas,rz-dmac";
+ reg = <0x11820000 0x10000>,
+ <0x11830000 0x10000>;
+ interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 125 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 126 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 127 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 131 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 132 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 133 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 134 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 135 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 136 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 137 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 138 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 139 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 140 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD R9A07G044_DMAC_ACLK>,
+ <&cpg CPG_MOD R9A07G044_DMAC_PCLK>;
+ power-domains = <&cpg>;
+ resets = <&cpg R9A07G044_DMAC_ARESETN>,
+ <&cpg R9A07G044_DMAC_RST_ASYNC>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ };
--
2.17.1
next prev parent reply other threads:[~2021-07-29 8:25 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-29 8:25 [PATCH v5 0/3] Add RZ/G2L DMAC support Biju Das
2021-07-29 8:25 ` Biju Das [this message]
2021-07-29 18:00 ` [PATCH v5 1/3] dt-bindings: dma: Document RZ/G2L bindings Rob Herring
2021-07-29 8:25 ` [PATCH v5 2/3] dmaengine: Extend the dma_slave_width for 128 bytes Biju Das
2021-07-29 8:25 ` [PATCH v5 3/3] drivers: dma: sh: Add DMAC driver for RZ/G2L SoC Biju Das
2021-07-29 11:33 ` kernel test robot
2021-07-29 13:26 ` Biju Das
2021-07-29 13:50 ` Biju Das
2021-07-29 14:08 ` Biju Das
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210729082520.26186-2-biju.das.jz@bp.renesas.com \
--to=biju.das.jz@bp.renesas.com \
--cc=Chris.Paterson2@renesas.com \
--cc=chris.brandt@renesas.com \
--cc=devicetree@vger.kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=robh+dt@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).