[PATCH AUTOSEL 5.14 01/99] pinctrl: renesas: rcar: Avoid changing PUDn when disabling bias

[PATCH AUTOSEL 5.14 01/99] pinctrl: renesas: rcar: Avoid changing PUDn when disabling bias

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 7ebaa41047738d46fca6376b3f1765ef69c463c5 ]

When disabling pin bias, there is no need to touch the LSI pin
pull-up/down control register (PUDn), which selects between pull-up and
pull-down.  Just disabling the pull-up/down function through the LSI pin
pull-enable register (PUENn) is sufficient.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/071ec644de2555da593a4531ef5d3e4d79cf997d.1625064076.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/renesas/pinctrl.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/pinctrl/renesas/pinctrl.c b/drivers/pinctrl/renesas/pinctrl.c
index bb488af29862..85cb78cfcfa6 100644
--- a/drivers/pinctrl/renesas/pinctrl.c
+++ b/drivers/pinctrl/renesas/pinctrl.c
@@ -898,17 +898,17 @@ void rcar_pinmux_set_bias(struct sh_pfc *pfc, unsigned int pin,
 
 	if (reg->puen) {
 		enable = sh_pfc_read(pfc, reg->puen) & ~BIT(bit);
-		if (bias != PIN_CONFIG_BIAS_DISABLE)
+		if (bias != PIN_CONFIG_BIAS_DISABLE) {
 			enable |= BIT(bit);
 
-		if (reg->pud) {
-			updown = sh_pfc_read(pfc, reg->pud) & ~BIT(bit);
-			if (bias == PIN_CONFIG_BIAS_PULL_UP)
-				updown |= BIT(bit);
+			if (reg->pud) {
+				updown = sh_pfc_read(pfc, reg->pud) & ~BIT(bit);
+				if (bias == PIN_CONFIG_BIAS_PULL_UP)
+					updown |= BIT(bit);
 
-			sh_pfc_write(pfc, reg->pud, updown);
+				sh_pfc_write(pfc, reg->pud, updown);
+			}
 		}
-
 		sh_pfc_write(pfc, reg->puen, enable);
 	} else {
 		enable = sh_pfc_read(pfc, reg->pud) & ~BIT(bit);
-- 
2.30.2

[PATCH AUTOSEL 5.14 16/99] clk: renesas: rzg2l: Fix return value and unused assignment

[Sasha Levin]

From: Yang Li <yang.lee@linux.alibaba.com>

[ Upstream commit 97c29755598f98c6c91f68f12bdd3f517e457890 ]

Currently the function returns NULL on error, so exact error code is
lost.  This patch changes return convention of the function to use
ERR_PTR() on error instead.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/1623896524-102058-1-git-send-email-yang.lee@linux.alibaba.com
[geert: Drop curly braces]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/renesas/renesas-rzg2l-cpg.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/renesas/renesas-rzg2l-cpg.c b/drivers/clk/renesas/renesas-rzg2l-cpg.c
index e7c59af2a1d8..5fe73225ece2 100644
--- a/drivers/clk/renesas/renesas-rzg2l-cpg.c
+++ b/drivers/clk/renesas/renesas-rzg2l-cpg.c
@@ -182,10 +182,8 @@ rzg2l_cpg_pll_clk_register(const struct cpg_core_clk *core,
 		return ERR_CAST(parent);
 
 	pll_clk = devm_kzalloc(dev, sizeof(*pll_clk), GFP_KERNEL);
-	if (!pll_clk) {
-		clk = ERR_PTR(-ENOMEM);
-		return NULL;
-	}
+	if (!pll_clk)
+		return ERR_PTR(-ENOMEM);
 
 	parent_name = __clk_get_name(parent);
 	init.name = core->name;
-- 
2.30.2

[PATCH AUTOSEL 5.14 22/99] pinctrl: renesas: Fix pin control matching on R-Car H3e-2G

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 91d1be9fb7d667ae136f05cc645276eb2c9fa40e ]

As R-Car H3 ES1.x (R8A77950) and R-Car ES2.0+ (R8A77951) use the same
compatible value, the pin control driver relies on soc_device_match()
with soc_id = "r8a7795" and the (non)matching of revision = "ES1.*" to
match with and distinguish between the two SoC variants.  The
corresponding entries in the normal of_match_table are present only to
make the optional sanity checks work.

The R-Car H3e-2G (R8A779M1) SoC is a different grading of the R-Car H3
ES3.0 (R8A77951) SoC.  It uses the same compatible values for individual
devices, but has an additional compatible value for the root node.
When running on an R-Car H3e-2G SoC, soc_device_match() with soc_id =
"r8a7795" does not return a match.  Hence the pin control driver falls
back to the normal of_match_table, and, as the R8A77950 entry is listed
first, incorrectly uses the sub-driver for R-Car H3 ES1.x.

Fix this by moving the entry for R8A77951 before the entry for R8A77950.
Simplify sh_pfc_quirk_match() to only handle R-Car H3 ES1,x, as R-Car H3
ES2.0+ can now be matched using the normal of_match_table as well.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/6cdc5bfa424461105779b56f455387e03560cf66.1626707688.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/renesas/core.c   | 29 ++++++++++++-----------------
 drivers/pinctrl/renesas/sh_pfc.h |  4 ++--
 2 files changed, 14 insertions(+), 19 deletions(-)

diff --git a/drivers/pinctrl/renesas/core.c b/drivers/pinctrl/renesas/core.c
index 5ccc49b387f1..f2ab02225837 100644
--- a/drivers/pinctrl/renesas/core.c
+++ b/drivers/pinctrl/renesas/core.c
@@ -571,17 +571,21 @@ static const struct of_device_id sh_pfc_of_table[] = {
 		.data = &r8a7794_pinmux_info,
 	},
 #endif
-/* Both r8a7795 entries must be present to make sanity checks work */
-#ifdef CONFIG_PINCTRL_PFC_R8A77950
+/*
+ * Both r8a7795 entries must be present to make sanity checks work, but only
+ * the first entry is actually used.
+ * R-Car H3 ES1.x is matched using soc_device_match() instead.
+ */
+#ifdef CONFIG_PINCTRL_PFC_R8A77951
 	{
 		.compatible = "renesas,pfc-r8a7795",
-		.data = &r8a77950_pinmux_info,
+		.data = &r8a77951_pinmux_info,
 	},
 #endif
-#ifdef CONFIG_PINCTRL_PFC_R8A77951
+#ifdef CONFIG_PINCTRL_PFC_R8A77950
 	{
 		.compatible = "renesas,pfc-r8a7795",
-		.data = &r8a77951_pinmux_info,
+		.data = &r8a77950_pinmux_info,
 	},
 #endif
 #ifdef CONFIG_PINCTRL_PFC_R8A77960
@@ -1085,26 +1089,20 @@ static inline void sh_pfc_check_driver(struct platform_driver *pdrv) {}
 #ifdef CONFIG_OF
 static const void *sh_pfc_quirk_match(void)
 {
-#if defined(CONFIG_PINCTRL_PFC_R8A77950) || \
-    defined(CONFIG_PINCTRL_PFC_R8A77951)
+#ifdef CONFIG_PINCTRL_PFC_R8A77950
 	const struct soc_device_attribute *match;
 	static const struct soc_device_attribute quirks[] = {
 		{
 			.soc_id = "r8a7795", .revision = "ES1.*",
 			.data = &r8a77950_pinmux_info,
 		},
-		{
-			.soc_id = "r8a7795",
-			.data = &r8a77951_pinmux_info,
-		},
-
 		{ /* sentinel */ }
 	};
 
 	match = soc_device_match(quirks);
 	if (match)
-		return match->data ?: ERR_PTR(-ENODEV);
-#endif /* CONFIG_PINCTRL_PFC_R8A77950 || CONFIG_PINCTRL_PFC_R8A77951 */
+		return match->data;
+#endif /* CONFIG_PINCTRL_PFC_R8A77950 */
 
 	return NULL;
 }
@@ -1119,9 +1117,6 @@ static int sh_pfc_probe(struct platform_device *pdev)
 #ifdef CONFIG_OF
 	if (pdev->dev.of_node) {
 		info = sh_pfc_quirk_match();
-		if (IS_ERR(info))
-			return PTR_ERR(info);
-
 		if (!info)
 			info = of_device_get_match_data(&pdev->dev);
 	} else
diff --git a/drivers/pinctrl/renesas/sh_pfc.h b/drivers/pinctrl/renesas/sh_pfc.h
index 320898861c4b..0fdafef2dc69 100644
--- a/drivers/pinctrl/renesas/sh_pfc.h
+++ b/drivers/pinctrl/renesas/sh_pfc.h
@@ -332,8 +332,8 @@ extern const struct sh_pfc_soc_info r8a7791_pinmux_info;
 extern const struct sh_pfc_soc_info r8a7792_pinmux_info;
 extern const struct sh_pfc_soc_info r8a7793_pinmux_info;
 extern const struct sh_pfc_soc_info r8a7794_pinmux_info;
-extern const struct sh_pfc_soc_info r8a77950_pinmux_info __weak;
-extern const struct sh_pfc_soc_info r8a77951_pinmux_info __weak;
+extern const struct sh_pfc_soc_info r8a77950_pinmux_info;
+extern const struct sh_pfc_soc_info r8a77951_pinmux_info;
 extern const struct sh_pfc_soc_info r8a77960_pinmux_info;
 extern const struct sh_pfc_soc_info r8a77961_pinmux_info;
 extern const struct sh_pfc_soc_info r8a77965_pinmux_info;
-- 
2.30.2