[PATCH v2] dt-bindings: display: bridge: renesas,dw-hdmi: Add resets property

[PATCH v2] dt-bindings: display: bridge: renesas,dw-hdmi: Add resets property

[Lad Prabhakar]

The DWC HDMI blocks on R-Car and RZ/G2 SoC's use resets, so to complete
the bindings include resets property.

This also fixes the below warning when running dtbs_check:
arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2-ex-idk-1110wr.dtb: hdmi@fead0000: Unevaluated properties are not allowed ('resets' was unexpected)
	From schema: Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.yaml

While at it mark resets property as required as all the DT sources
in the kernel specify resets and update the example node.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
v1->v2
* Updated commit message
* Marked resets as required property
* Updated the example node
* Included RB tag from Laurent

v1: https://lore.kernel.org/lkml/20220829215816.6206-1-prabhakar.mahadev-lad.rj@bp.renesas.com/
---
 .../devicetree/bindings/display/bridge/renesas,dw-hdmi.yaml  | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.yaml
index 0c9785c8db51..e3ec697f89e7 100644
--- a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.yaml
@@ -38,6 +38,9 @@ properties:
   clock-names:
     maxItems: 2
 
+  resets:
+    maxItems: 1
+
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
 
@@ -67,6 +70,7 @@ required:
   - reg
   - clocks
   - clock-names
+  - resets
   - interrupts
   - ports
 
@@ -85,6 +89,7 @@ examples:
         clocks = <&cpg CPG_CORE R8A7795_CLK_S0D4>, <&cpg CPG_MOD 729>;
         clock-names = "iahb", "isfr";
         power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+        resets = <&cpg 729>;
 
         ports {
             #address-cells = <1>;
-- 
2.25.1

Re: [PATCH v2] dt-bindings: display: bridge: renesas,dw-hdmi: Add resets property

[Krzysztof Kozlowski]

On 01/09/2022 00:35, Lad Prabhakar wrote:
> The DWC HDMI blocks on R-Car and RZ/G2 SoC's use resets, so to complete
> the bindings include resets property.
> 
> This also fixes the below warning when running dtbs_check:
> arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2-ex-idk-1110wr.dtb: hdmi@fead0000: Unevaluated properties are not allowed ('resets' was unexpected)
> 	From schema: Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.yaml
> 
> While at it mark resets property as required as all the DT sources
> in the kernel specify resets and update the example node.
> 
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>


Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>


Best regards,
Krzysztof