[PATCH 0/5] renesas: remove support for H3 ES1

[PATCH 0/5] renesas: remove support for H3 ES1

[Wolfram Sang]

Because H3 ES1 becomes an increasing maintenance burden and was only
available to a development group, we decided to remove upstream support
for it. It doesn't even boot since v6.3-rc1. Here are the patches to
remove the architecture and core bits. Other driver changes will be sent
individually. Review tags have been gathered before during an internal
discussion. Only change since the internal version is a plain rebase to
v6.3-rc1. A branch with all removals is here:

git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git renesas/h3es1-removal


Wolfram Sang (5):
  pinctrl: renesas: remove R-Car H3 ES1.* handling
  arm64: dts: renesas: remove R-Car H3 ES1.* devicetrees
  dt-bindings: soc: renesas: remove R-Car H3 ES1.*
  soc: renesas: rcar-sysc: remove R-Car H3 ES1.* handling
  soc: renesas: remove r8a77950 arch

 .../bindings/soc/renesas/renesas.yaml         |    8 +-
 arch/arm64/boot/dts/renesas/Makefile          |    4 -
 .../boot/dts/renesas/r8a77950-salvator-x.dts  |   49 -
 .../boot/dts/renesas/r8a77950-ulcb-kf.dts     |   16 -
 arch/arm64/boot/dts/renesas/r8a77950-ulcb.dts |   37 -
 arch/arm64/boot/dts/renesas/r8a77950.dtsi     |  330 -
 arch/arm64/configs/defconfig                  |    1 -
 drivers/pinctrl/renesas/Kconfig               |    5 -
 drivers/pinctrl/renesas/Makefile              |    1 -
 drivers/pinctrl/renesas/core.c                |   41 +-
 drivers/pinctrl/renesas/pfc-r8a77950.c        | 5947 -----------------
 drivers/pinctrl/renesas/sh_pfc.h              |    1 -
 drivers/soc/renesas/Kconfig                   |    7 -
 drivers/soc/renesas/r8a7795-sysc.c            |   10 -
 drivers/soc/renesas/renesas-soc.c             |    2 +-
 include/dt-bindings/power/r8a7795-sysc.h      |    1 -
 16 files changed, 8 insertions(+), 6452 deletions(-)
 delete mode 100644 arch/arm64/boot/dts/renesas/r8a77950-salvator-x.dts
 delete mode 100644 arch/arm64/boot/dts/renesas/r8a77950-ulcb-kf.dts
 delete mode 100644 arch/arm64/boot/dts/renesas/r8a77950-ulcb.dts
 delete mode 100644 arch/arm64/boot/dts/renesas/r8a77950.dtsi
 delete mode 100644 drivers/pinctrl/renesas/pfc-r8a77950.c

-- 
2.35.1

[PATCH 2/5] arm64: dts: renesas: remove R-Car H3 ES1.* devicetrees

[Wolfram Sang]

R-Car H3 ES1.* was only available to an internal development group and
needed a lot of quirks and workarounds. These become a maintenance
burden now, so our development group decided to remove upstream support
and disable booting for this SoC. Public users only have ES2 onwards.

Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
 arch/arm64/boot/dts/renesas/Makefile          |   4 -
 .../boot/dts/renesas/r8a77950-salvator-x.dts  |  49 ---
 .../boot/dts/renesas/r8a77950-ulcb-kf.dts     |  16 -
 arch/arm64/boot/dts/renesas/r8a77950-ulcb.dts |  37 --
 arch/arm64/boot/dts/renesas/r8a77950.dtsi     | 330 ------------------
 5 files changed, 436 deletions(-)
 delete mode 100644 arch/arm64/boot/dts/renesas/r8a77950-salvator-x.dts
 delete mode 100644 arch/arm64/boot/dts/renesas/r8a77950-ulcb-kf.dts
 delete mode 100644 arch/arm64/boot/dts/renesas/r8a77950-ulcb.dts
 delete mode 100644 arch/arm64/boot/dts/renesas/r8a77950.dtsi

diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index 0699b51c1247..366fddbd3c91 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -28,10 +28,6 @@ dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-hihope-rzg2h-ex.dtb
 dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-hihope-rzg2h-ex-idk-1110wr.dtb
 dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-hihope-rzg2h-ex-mipi-2.1.dtb
 
-dtb-$(CONFIG_ARCH_R8A77950) += r8a77950-salvator-x.dtb
-dtb-$(CONFIG_ARCH_R8A77950) += r8a77950-ulcb.dtb
-dtb-$(CONFIG_ARCH_R8A77950) += r8a77950-ulcb-kf.dtb
-
 dtb-$(CONFIG_ARCH_R8A77951) += r8a77951-salvator-x.dtb
 dtb-$(CONFIG_ARCH_R8A77951) += r8a77951-salvator-xs.dtb
 dtb-$(CONFIG_ARCH_R8A77951) += r8a77951-ulcb.dtb
diff --git a/arch/arm64/boot/dts/renesas/r8a77950-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a77950-salvator-x.dts
deleted file mode 100644
index c6ca61a8ed40..000000000000
--- a/arch/arm64/boot/dts/renesas/r8a77950-salvator-x.dts
+++ /dev/null
@@ -1,49 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the Salvator-X board with R-Car H3 ES1.x
- *
- * Copyright (C) 2015 Renesas Electronics Corp.
- */
-
-/dts-v1/;
-#include "r8a77950.dtsi"
-#include "salvator-x.dtsi"
-
-/ {
-	model = "Renesas Salvator-X board based on r8a77950";
-	compatible = "renesas,salvator-x", "renesas,r8a7795";
-
-	memory@48000000 {
-		device_type = "memory";
-		/* first 128MB is reserved for secure area. */
-		reg = <0x0 0x48000000 0x0 0x38000000>;
-	};
-
-	memory@500000000 {
-		device_type = "memory";
-		reg = <0x5 0x00000000 0x0 0x40000000>;
-	};
-
-	memory@600000000 {
-		device_type = "memory";
-		reg = <0x6 0x00000000 0x0 0x40000000>;
-	};
-
-	memory@700000000 {
-		device_type = "memory";
-		reg = <0x7 0x00000000 0x0 0x40000000>;
-	};
-};
-
-&du {
-	clocks = <&cpg CPG_MOD 724>,
-		 <&cpg CPG_MOD 723>,
-		 <&cpg CPG_MOD 722>,
-		 <&cpg CPG_MOD 721>,
-		 <&versaclock5 1>,
-		 <&x21_clk>,
-		 <&x22_clk>,
-		 <&versaclock5 2>;
-	clock-names = "du.0", "du.1", "du.2", "du.3",
-		      "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3";
-};
diff --git a/arch/arm64/boot/dts/renesas/r8a77950-ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a77950-ulcb-kf.dts
deleted file mode 100644
index 85f008ef63de..000000000000
--- a/arch/arm64/boot/dts/renesas/r8a77950-ulcb-kf.dts
+++ /dev/null
@@ -1,16 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the H3ULCB Kingfisher board with R-Car H3 ES1.x
- *
- * Copyright (C) 2017 Renesas Electronics Corp.
- * Copyright (C) 2017 Cogent Embedded, Inc.
- */
-
-#include "r8a77950-ulcb.dts"
-#include "ulcb-kf.dtsi"
-
-/ {
-	model = "Renesas H3ULCB Kingfisher board based on r8a77950";
-	compatible = "shimafuji,kingfisher", "renesas,h3ulcb",
-		     "renesas,r8a7795";
-};
diff --git a/arch/arm64/boot/dts/renesas/r8a77950-ulcb.dts b/arch/arm64/boot/dts/renesas/r8a77950-ulcb.dts
deleted file mode 100644
index 5340579931e3..000000000000
--- a/arch/arm64/boot/dts/renesas/r8a77950-ulcb.dts
+++ /dev/null
@@ -1,37 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the H3ULCB (R-Car Starter Kit Premier) board with R-Car H3 ES1.x
- *
- * Copyright (C) 2016 Renesas Electronics Corp.
- * Copyright (C) 2016 Cogent Embedded, Inc.
- */
-
-/dts-v1/;
-#include "r8a77950.dtsi"
-#include "ulcb.dtsi"
-
-/ {
-	model = "Renesas H3ULCB board based on r8a77950";
-	compatible = "renesas,h3ulcb", "renesas,r8a7795";
-
-	memory@48000000 {
-		device_type = "memory";
-		/* first 128MB is reserved for secure area. */
-		reg = <0x0 0x48000000 0x0 0x38000000>;
-	};
-
-	memory@500000000 {
-		device_type = "memory";
-		reg = <0x5 0x00000000 0x0 0x40000000>;
-	};
-
-	memory@600000000 {
-		device_type = "memory";
-		reg = <0x6 0x00000000 0x0 0x40000000>;
-	};
-
-	memory@700000000 {
-		device_type = "memory";
-		reg = <0x7 0x00000000 0x0 0x40000000>;
-	};
-};
diff --git a/arch/arm64/boot/dts/renesas/r8a77950.dtsi b/arch/arm64/boot/dts/renesas/r8a77950.dtsi
deleted file mode 100644
index 57eb88177e92..000000000000
--- a/arch/arm64/boot/dts/renesas/r8a77950.dtsi
+++ /dev/null
@@ -1,330 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the R-Car H3 (R8A77950) SoC
- *
- * Copyright (C) 2015 Renesas Electronics Corp.
- */
-
-#include "r8a77951.dtsi"
-
-#undef SOC_HAS_USB2_CH3
-
-&audma0 {
-	iommus = <&ipmmu_mp1 0>, <&ipmmu_mp1 1>,
-	       <&ipmmu_mp1 2>, <&ipmmu_mp1 3>,
-	       <&ipmmu_mp1 4>, <&ipmmu_mp1 5>,
-	       <&ipmmu_mp1 6>, <&ipmmu_mp1 7>,
-	       <&ipmmu_mp1 8>, <&ipmmu_mp1 9>,
-	       <&ipmmu_mp1 10>, <&ipmmu_mp1 11>,
-	       <&ipmmu_mp1 12>, <&ipmmu_mp1 13>,
-	       <&ipmmu_mp1 14>, <&ipmmu_mp1 15>;
-};
-
-&audma1 {
-	iommus = <&ipmmu_mp1 16>, <&ipmmu_mp1 17>,
-	       <&ipmmu_mp1 18>, <&ipmmu_mp1 19>,
-	       <&ipmmu_mp1 20>, <&ipmmu_mp1 21>,
-	       <&ipmmu_mp1 22>, <&ipmmu_mp1 23>,
-	       <&ipmmu_mp1 24>, <&ipmmu_mp1 25>,
-	       <&ipmmu_mp1 26>, <&ipmmu_mp1 27>,
-	       <&ipmmu_mp1 28>, <&ipmmu_mp1 29>,
-	       <&ipmmu_mp1 30>, <&ipmmu_mp1 31>;
-};
-
-&cluster0_opp {
-	/delete-node/ opp-1600000000;
-	/delete-node/ opp-1700000000;
-};
-
-&du {
-	renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd3 0>;
-};
-
-&fcpvb1 {
-	iommus = <&ipmmu_vp0 7>;
-};
-
-&fcpf1 {
-	iommus = <&ipmmu_vp0 1>;
-};
-
-&fcpvi1 {
-	iommus = <&ipmmu_vp0 9>;
-};
-
-&fcpvd2 {
-	iommus = <&ipmmu_vi0 10>;
-};
-
-&gpio1 {
-	gpio-ranges = <&pfc 0 32 28>;
-};
-
-&ipmmu_vi0 {
-	renesas,ipmmu-main = <&ipmmu_mm 11>;
-};
-
-&ipmmu_vp0 {
-	renesas,ipmmu-main = <&ipmmu_mm 12>;
-};
-
-&ipmmu_vc0 {
-	renesas,ipmmu-main = <&ipmmu_mm 9>;
-};
-
-&ipmmu_vc1 {
-	renesas,ipmmu-main = <&ipmmu_mm 10>;
-};
-
-&ipmmu_rt {
-	renesas,ipmmu-main = <&ipmmu_mm 7>;
-};
-
-&soc {
-	/delete-node/ dma-controller@e6460000;
-	/delete-node/ dma-controller@e6470000;
-
-	ipmmu_mp1: iommu@ec680000 {
-		compatible = "renesas,ipmmu-r8a7795";
-		reg = <0 0xec680000 0 0x1000>;
-		renesas,ipmmu-main = <&ipmmu_mm 5>;
-		power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
-		#iommu-cells = <1>;
-	};
-
-	ipmmu_sy: iommu@e7730000 {
-		compatible = "renesas,ipmmu-r8a7795";
-		reg = <0 0xe7730000 0 0x1000>;
-		renesas,ipmmu-main = <&ipmmu_mm 8>;
-		power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
-		#iommu-cells = <1>;
-	};
-
-	/delete-node/ iommu@fd950000;
-	/delete-node/ iommu@fd960000;
-	/delete-node/ iommu@fd970000;
-	/delete-node/ iommu@febe0000;
-	/delete-node/ iommu@fe980000;
-
-	xhci1: usb@ee040000 {
-		compatible = "renesas,xhci-r8a7795", "renesas,rcar-gen3-xhci";
-		reg = <0 0xee040000 0 0xc00>;
-		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cpg CPG_MOD 327>;
-		power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
-		resets = <&cpg 327>;
-		status = "disabled";
-	};
-
-	/delete-node/ usb@e659c000;
-	/delete-node/ usb@ee0e0000;
-	/delete-node/ usb@ee0e0100;
-
-	/delete-node/ usb-phy@ee0e0200;
-
-	fdp1@fe948000 {
-		compatible = "renesas,fdp1";
-		reg = <0 0xfe948000 0 0x2400>;
-		interrupts = <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cpg CPG_MOD 117>;
-		power-domains = <&sysc R8A7795_PD_A3VP>;
-		resets = <&cpg 117>;
-		renesas,fcp = <&fcpf2>;
-	};
-
-	fcpf2: fcp@fe952000 {
-		compatible = "renesas,fcpf";
-		reg = <0 0xfe952000 0 0x200>;
-		clocks = <&cpg CPG_MOD 613>;
-		power-domains = <&sysc R8A7795_PD_A3VP>;
-		resets = <&cpg 613>;
-		iommus = <&ipmmu_vp0 2>;
-	};
-
-	fcpvd3: fcp@fea3f000 {
-		compatible = "renesas,fcpv";
-		reg = <0 0xfea3f000 0 0x200>;
-		clocks = <&cpg CPG_MOD 600>;
-		power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
-		resets = <&cpg 600>;
-		iommus = <&ipmmu_vi0 11>;
-	};
-
-	fcpvi2: fcp@fe9cf000 {
-		compatible = "renesas,fcpv";
-		reg = <0 0xfe9cf000 0 0x200>;
-		clocks = <&cpg CPG_MOD 609>;
-		power-domains = <&sysc R8A7795_PD_A3VP>;
-		resets = <&cpg 609>;
-		iommus = <&ipmmu_vp0 10>;
-	};
-
-	vspd3: vsp@fea38000 {
-		compatible = "renesas,vsp2";
-		reg = <0 0xfea38000 0 0x5000>;
-		interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cpg CPG_MOD 620>;
-		power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
-		resets = <&cpg 620>;
-
-		renesas,fcp = <&fcpvd3>;
-	};
-
-	vspi2: vsp@fe9c0000 {
-		compatible = "renesas,vsp2";
-		reg = <0 0xfe9c0000 0 0x8000>;
-		interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cpg CPG_MOD 629>;
-		power-domains = <&sysc R8A7795_PD_A3VP>;
-		resets = <&cpg 629>;
-
-		renesas,fcp = <&fcpvi2>;
-	};
-
-	csi21: csi2@fea90000 {
-		compatible = "renesas,r8a7795-csi2";
-		reg = <0 0xfea90000 0 0x10000>;
-		interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cpg CPG_MOD 713>;
-		power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
-		resets = <&cpg 713>;
-		status = "disabled";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-			};
-
-			port@1 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				reg = <1>;
-
-				csi21vin0: endpoint@0 {
-					reg = <0>;
-					remote-endpoint = <&vin0csi21>;
-				};
-				csi21vin1: endpoint@1 {
-					reg = <1>;
-					remote-endpoint = <&vin1csi21>;
-				};
-				csi21vin2: endpoint@2 {
-					reg = <2>;
-					remote-endpoint = <&vin2csi21>;
-				};
-				csi21vin3: endpoint@3 {
-					reg = <3>;
-					remote-endpoint = <&vin3csi21>;
-				};
-				csi21vin4: endpoint@4 {
-					reg = <4>;
-					remote-endpoint = <&vin4csi21>;
-				};
-				csi21vin5: endpoint@5 {
-					reg = <5>;
-					remote-endpoint = <&vin5csi21>;
-				};
-				csi21vin6: endpoint@6 {
-					reg = <6>;
-					remote-endpoint = <&vin6csi21>;
-				};
-				csi21vin7: endpoint@7 {
-					reg = <7>;
-					remote-endpoint = <&vin7csi21>;
-				};
-			};
-		};
-	};
-};
-
-&vin0 {
-	ports {
-		port@1 {
-			vin0csi21: endpoint@1 {
-				reg = <1>;
-				remote-endpoint = <&csi21vin0>;
-			};
-		};
-	};
-};
-
-&vin1 {
-	ports {
-		port@1 {
-			vin1csi21: endpoint@1 {
-				reg = <1>;
-				remote-endpoint = <&csi21vin1>;
-			};
-		};
-	};
-};
-
-&vin2 {
-	ports {
-		port@1 {
-			vin2csi21: endpoint@1 {
-				reg = <1>;
-				remote-endpoint = <&csi21vin2>;
-			};
-		};
-	};
-};
-
-&vin3 {
-	ports {
-		port@1 {
-			vin3csi21: endpoint@1 {
-				reg = <1>;
-				remote-endpoint = <&csi21vin3>;
-			};
-		};
-	};
-};
-
-&vin4 {
-	ports {
-		port@1 {
-			vin4csi21: endpoint@1 {
-				reg = <1>;
-				remote-endpoint = <&csi21vin4>;
-			};
-		};
-	};
-};
-
-&vin5 {
-	ports {
-		port@1 {
-			vin5csi21: endpoint@1 {
-				reg = <1>;
-				remote-endpoint = <&csi21vin5>;
-			};
-		};
-	};
-};
-
-&vin6 {
-	ports {
-		port@1 {
-			vin6csi21: endpoint@1 {
-				reg = <1>;
-				remote-endpoint = <&csi21vin6>;
-			};
-		};
-	};
-};
-
-&vin7 {
-	ports {
-		port@1 {
-			vin7csi21: endpoint@1 {
-				reg = <1>;
-				remote-endpoint = <&csi21vin7>;
-			};
-		};
-	};
-};
-- 
2.35.1

[PATCH 3/5] dt-bindings: soc: renesas: remove R-Car H3 ES1.*

[Wolfram Sang]

R-Car H3 ES1.* was only available to an internal development group and
needed a lot of quirks and workarounds. These become a maintenance
burden now, so our development group decided to remove upstream support
and disable booting for this SoC. Public users only have ES2 onwards.

Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
 .../devicetree/bindings/soc/renesas/renesas.yaml          | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/soc/renesas/renesas.yaml b/Documentation/devicetree/bindings/soc/renesas/renesas.yaml
index 2789022b52eb..c3389de20c72 100644
--- a/Documentation/devicetree/bindings/soc/renesas/renesas.yaml
+++ b/Documentation/devicetree/bindings/soc/renesas/renesas.yaml
@@ -212,12 +212,12 @@ properties:
               - renesas,silk # SILK (RTP0RC7794LCB00011S)
           - const: renesas,r8a7794
 
-      - description: R-Car H3 (R8A77950)
+      # Note: R-Car H3 ES1.* (R8A77950) is not supported upstream anymore!
+
+      - description: R-Car H3 ES2.0 and later (R8A77951)
         items:
           - enum:
-                # H3ULCB (R-Car Starter Kit Premier, RTP0RC7795SKBX0010SA00 (H3 ES1.1))
-                # H3ULCB (R-Car Starter Kit Premier, RTP0RC77951SKBX010SA00 (H3 ES2.0))
-              - renesas,h3ulcb
+              - renesas,h3ulcb # H3ULCB (R-Car Starter Kit Premier, RTP0RC77951SKBX010SA00 (H3 ES2.0))
               - renesas,salvator-x # Salvator-X (RTP0RC7795SIPB0010S)
               - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version, RTP0RC7795SIPB0012S)
           - const: renesas,r8a7795
-- 
2.35.1

[PATCH 4/5] soc: renesas: rcar-sysc: remove R-Car H3 ES1.* handling

[Wolfram Sang]

R-Car H3 ES1.* was only available to an internal development group and
needed a lot of quirks and workarounds. These become a maintenance
burden now, so our development group decided to remove upstream support
and disable booting for this SoC. Public users only have ES2 onwards.

Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
 drivers/soc/renesas/r8a7795-sysc.c       | 10 ----------
 include/dt-bindings/power/r8a7795-sysc.h |  1 -
 2 files changed, 11 deletions(-)

diff --git a/drivers/soc/renesas/r8a7795-sysc.c b/drivers/soc/renesas/r8a7795-sysc.c
index 91074411b8cf..cbe1ff0fc583 100644
--- a/drivers/soc/renesas/r8a7795-sysc.c
+++ b/drivers/soc/renesas/r8a7795-sysc.c
@@ -38,8 +38,6 @@ static struct rcar_sysc_area r8a7795_areas[] __initdata = {
 	{ "a3vp",	0x340, 0, R8A7795_PD_A3VP,	R8A7795_PD_ALWAYS_ON },
 	{ "cr7",	0x240, 0, R8A7795_PD_CR7,	R8A7795_PD_ALWAYS_ON },
 	{ "a3vc",	0x380, 0, R8A7795_PD_A3VC,	R8A7795_PD_ALWAYS_ON },
-	/* A2VC0 exists on ES1.x only */
-	{ "a2vc0",	0x3c0, 0, R8A7795_PD_A2VC0,	R8A7795_PD_A3VC },
 	{ "a2vc1",	0x3c0, 1, R8A7795_PD_A2VC1,	R8A7795_PD_A3VC },
 	{ "3dg-a",	0x100, 0, R8A7795_PD_3DG_A,	R8A7795_PD_ALWAYS_ON },
 	{ "3dg-b",	0x100, 1, R8A7795_PD_3DG_B,	R8A7795_PD_3DG_A },
@@ -54,14 +52,10 @@ static struct rcar_sysc_area r8a7795_areas[] __initdata = {
 	 * Fixups for R-Car H3 revisions
 	 */
 
-#define HAS_A2VC0	BIT(0)		/* Power domain A2VC0 is present */
 #define NO_EXTMASK	BIT(1)		/* Missing SYSCEXTMASK register */
 
 static const struct soc_device_attribute r8a7795_quirks_match[] __initconst = {
 	{
-		.soc_id = "r8a7795", .revision = "ES1.*",
-		.data = (void *)(HAS_A2VC0 | NO_EXTMASK),
-	}, {
 		.soc_id = "r8a7795", .revision = "ES2.*",
 		.data = (void *)(NO_EXTMASK),
 	},
@@ -77,10 +71,6 @@ static int __init r8a7795_sysc_init(void)
 	if (attr)
 		quirks = (uintptr_t)attr->data;
 
-	if (!(quirks & HAS_A2VC0))
-		rcar_sysc_nullify(r8a7795_areas, ARRAY_SIZE(r8a7795_areas),
-				  R8A7795_PD_A2VC0);
-
 	if (quirks & NO_EXTMASK)
 		r8a7795_sysc_info.extmask_val = 0;
 
diff --git a/include/dt-bindings/power/r8a7795-sysc.h b/include/dt-bindings/power/r8a7795-sysc.h
index eea6ad69f0b0..ff5323858572 100644
--- a/include/dt-bindings/power/r8a7795-sysc.h
+++ b/include/dt-bindings/power/r8a7795-sysc.h
@@ -30,7 +30,6 @@
 #define R8A7795_PD_CA53_SCU		21
 #define R8A7795_PD_3DG_E		22
 #define R8A7795_PD_A3IR			24
-#define R8A7795_PD_A2VC0		25	/* ES1.x only */
 #define R8A7795_PD_A2VC1		26
 
 /* Always-on power area */
-- 
2.35.1

[PATCH 5/5] soc: renesas: remove r8a77950 arch

[Wolfram Sang]

R-Car H3 ES1.* was only available to an internal development group and
needed a lot of quirks and workarounds. These become a maintenance
burden now, so our development group decided to remove upstream support
and disable booting for this SoC. Public users only have ES2 onwards.

Remove the architecture which describes H3 ES1.*.

Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
 arch/arm64/configs/defconfig      | 1 -
 drivers/soc/renesas/Kconfig       | 7 -------
 drivers/soc/renesas/renesas-soc.c | 2 +-
 3 files changed, 1 insertion(+), 9 deletions(-)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 7790ee42c68a..ef88f86fbfda 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -1217,7 +1217,6 @@ CONFIG_QCOM_APR=m
 CONFIG_QCOM_ICC_BWMON=m
 CONFIG_ARCH_R8A77995=y
 CONFIG_ARCH_R8A77990=y
-CONFIG_ARCH_R8A77950=y
 CONFIG_ARCH_R8A77951=y
 CONFIG_ARCH_R8A77965=y
 CONFIG_ARCH_R8A77960=y
diff --git a/drivers/soc/renesas/Kconfig b/drivers/soc/renesas/Kconfig
index 4e8b51ba2266..de31589ed054 100644
--- a/drivers/soc/renesas/Kconfig
+++ b/drivers/soc/renesas/Kconfig
@@ -206,13 +206,6 @@ config ARCH_R8A77990
 	  This enables support for the Renesas R-Car E3 SoC.
 	  This includes different gradings like R-Car E3e.
 
-config ARCH_R8A77950
-	bool "ARM64 Platform support for R-Car H3 ES1.x"
-	select ARCH_RCAR_GEN3
-	select SYSC_R8A7795
-	help
-	  This enables support for the Renesas R-Car H3 SoC (revision 1.x).
-
 config ARCH_R8A77951
 	bool "ARM64 Platform support for R-Car H3 ES2.0+"
 	select ARCH_RCAR_GEN3
diff --git a/drivers/soc/renesas/renesas-soc.c b/drivers/soc/renesas/renesas-soc.c
index 468ebce1ea88..66ff1c25f85f 100644
--- a/drivers/soc/renesas/renesas-soc.c
+++ b/drivers/soc/renesas/renesas-soc.c
@@ -330,7 +330,7 @@ static const struct of_device_id renesas_socs[] __initconst = {
 #ifdef CONFIG_ARCH_R8A7794
 	{ .compatible = "renesas,r8a7794",	.data = &soc_rcar_e2 },
 #endif
-#if defined(CONFIG_ARCH_R8A77950) || defined(CONFIG_ARCH_R8A77951)
+#if defined(CONFIG_ARCH_R8A77951)
 	{ .compatible = "renesas,r8a7795",	.data = &soc_rcar_h3 },
 #endif
 #ifdef CONFIG_ARCH_R8A77951
-- 
2.35.1

Re: [PATCH 5/5] soc: renesas: remove r8a77950 arch

[Geert Uytterhoeven]

Hi Wolfram,

On Tue, Mar 7, 2023 at 11:57 AM Wolfram Sang
<wsa+renesas@sang-engineering.com> wrote:
> R-Car H3 ES1.* was only available to an internal development group and
> needed a lot of quirks and workarounds. These become a maintenance
> burden now, so our development group decided to remove upstream support
> and disable booting for this SoC. Public users only have ES2 onwards.
>
> Remove the architecture which describes H3 ES1.*.
>
> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>

Thanks for your patch!

> ---
>  arch/arm64/configs/defconfig      | 1 -
>  drivers/soc/renesas/Kconfig       | 7 -------
>  drivers/soc/renesas/renesas-soc.c | 2 +-

I will split this in two patches (defconfig and drivers/soc)...

> --- a/drivers/soc/renesas/renesas-soc.c
> +++ b/drivers/soc/renesas/renesas-soc.c
> @@ -330,7 +330,7 @@ static const struct of_device_id renesas_socs[] __initconst = {
>  #ifdef CONFIG_ARCH_R8A7794
>         { .compatible = "renesas,r8a7794",      .data = &soc_rcar_e2 },
>  #endif
> -#if defined(CONFIG_ARCH_R8A77950) || defined(CONFIG_ARCH_R8A77951)
> +#if defined(CONFIG_ARCH_R8A77951)
>         { .compatible = "renesas,r8a7795",      .data = &soc_rcar_h3 },

... and merge this with the section below ...

>  #endif
>  #ifdef CONFIG_ARCH_R8A77951

... while queuing in renesas-devel for v6.4.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH 5/5] soc: renesas: remove r8a77950 arch

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 114 bytes --]

Hi Geert,

> ... while queuing in renesas-devel for v6.4.

Thank you for the fixups!

Happy hacking,

   Wolfram


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH 3/5] dt-bindings: soc: renesas: remove R-Car H3 ES1.*

[Rob Herring]

On Tue, 07 Mar 2023 11:56:39 +0100, Wolfram Sang wrote:
> R-Car H3 ES1.* was only available to an internal development group and
> needed a lot of quirks and workarounds. These become a maintenance
> burden now, so our development group decided to remove upstream support
> and disable booting for this SoC. Public users only have ES2 onwards.
> 
> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> ---
>  .../devicetree/bindings/soc/renesas/renesas.yaml          | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH 1/5] pinctrl: renesas: remove R-Car H3 ES1.* handling

[Linus Walleij]

On Tue, Mar 7, 2023 at 11:57 AM Wolfram Sang
<wsa+renesas@sang-engineering.com> wrote:

> R-Car H3 ES1.* was only available to an internal development group and
> needed a lot of quirks and workarounds. These become a maintenance
> burden now, so our development group decided to remove upstream support
> and disable booting for this SoC. Public users only have ES2 onwards.
>
> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>

Good bye ES1.*, I expect that Geert will queue the patches as usual.

Yours,
Linus Walleij

Re: [PATCH 1/5] pinctrl: renesas: remove R-Car H3 ES1.* handling

[Geert Uytterhoeven]

Hi Linus,

On Thu, Mar 9, 2023 at 2:53 PM Linus Walleij <linus.walleij@linaro.org> wrote:
> On Tue, Mar 7, 2023 at 11:57 AM Wolfram Sang
> <wsa+renesas@sang-engineering.com> wrote:
>
> > R-Car H3 ES1.* was only available to an internal development group and
> > needed a lot of quirks and workarounds. These become a maintenance
> > burden now, so our development group decided to remove upstream support
> > and disable booting for this SoC. Public users only have ES2 onwards.
> >
> > Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> > Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
> > Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
>
> Good bye ES1.*, I expect that Geert will queue the patches as usual.

At your service, queuing in renesas-pinctrl-for-v6.4.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds