* [PATCH v9 RESEND 0/5] Add RZ/{G2L,G2LC} and RZ/V2L Display Unit support
@ 2023-05-02 10:09 Biju Das
2023-05-02 10:09 ` [PATCH v9 RESEND 1/5] drm: Place Renesas drivers in a separate dir Biju Das
` (5 more replies)
0 siblings, 6 replies; 20+ messages in thread
From: Biju Das @ 2023-05-02 10:09 UTC (permalink / raw)
To: David Airlie, Daniel Vetter, Philipp Zabel
Cc: Biju Das, dri-devel, linux-renesas-soc, Geert Uytterhoeven,
Fabrizio Castro, Prabhakar Mahadev Lad
RZ/G2L LCD controller composed of Frame compression Processor(FCPVD), Video
signal processor (VSPD) and Display unit(DU). The output of LCDC is
connected to Display parallel interface and MIPI link video interface.
The output from DSI is connected to ADV7535.
Created a vendor specific directory renesas and moved all renesas drm drivers
to it (rcar-du and shmobile). Then added support for RZ/G2L DU DRM driver by
creating rz_du directory.
Ref:
https://lore.kernel.org/linux-renesas-soc/OS0PR01MB5922717E4CCFE07F3C25FBC986989@OS0PR01MB5922.jpnprd01.prod.outlook.com/#t
v8->v9:
* Added Rb tag from Laurent and Acked-by tag from Kieran for patch#1.
* Added Rb tag from Laurent and Geert for patch#3.
* Dropped reset_control_assert() from error patch for rzg2l_du_crtc_get() as
suggested by Philipp Zabel.
* Added Rb tag from Laurent oatch#5.
* Updated MAINTAINERS entries for common parts(Makefile and Kconfig).
v7->v8:
* Moved rcar-du and shmobile DRM drivers to renesas specific vendor directory.
* Fixed the typo vsp2->du in RZ/V2L DU bindings patch.
* Added Rb tag from Rob for RZ/V2L DU bindings patch.
* Dropped RCar du lib and created RZ/G2L DU DRM driver by creating rz_du folder.
* Updated MAINTAINERS entries.
v6->v7:
* Split DU lib and RZ/G2L du driver as separate patch series as
DU support added to more platforms based on RZ/G2L alike SoCs.
* Rebased to latest drm-tip.
* Added patch #2 for binding support for RZ/V2L DU
* Added patch #4 for driver support for RZ/V2L DU
* Added patch #5 for SoC DTSI support for RZ/G2L DU
* Added patch #6 for SoC DTSI support for RZ/V2L DU
* Added patch #7 for Enabling DU on SMARC EVK based on RZ/{G2L,V2L} SoCs.
* Added patch #8 for Enabling DU on SMARC EVK based on RZ/G2LC SoC.
v5->v6:
* Merged DU lib and RZ/G2L du driver in same patch series
* Rebased to latest drm-misc.
* Merged patch#1 to RZ/G2L Driver patch.
* Updated KConfig dependency from ARCH_RENESAS->ARCH_RZG2L.
* Optimized rzg2l_du_output_name() by removing unsupported outputs.
v4->v5:
* Added Rb tag from Rob for binding patch.
* Started using RCar DU libs(kms, vsp and encoder)
* Started using rcar_du_device, rcar_du_write, rcar_du_crtc,
rcar_du_format_info and rcar_du_encoder.
v3->v4:
* Changed compatible name from renesas,du-r9a07g044->renesas,r9a07g044-du
* started using same compatible for RZ/G2{L,LC}
* Removed rzg2l_du_group.h and struct rzg2l_du_group
* Renamed __rzg2l_du_group_start_stop->rzg2l_du_start_stop
* Removed rzg2l_du_group_restart
* Updated rzg2l_du_crtc_set_display_timing
* Removed mode_valid callback.
* Updated rzg2l_du_crtc_create() parameters
* Updated compatible
* Removed RZG2L_DU_MAX_GROUPS
V2->v3:
* Added new bindings for RZ/G2L DU
* Removed indirection and created new DRM driver based on R-Car DU
v1->v2:
* Based on [1], all references to 'rzg2l_lcdc' replaced with 'rzg2l_du'
* Updated commit description for bindings
* Removed LCDC references from bindings
* Changed clock name from du.0->aclk from bindings
* Changed reset name from du.0->du from bindings
* Replaced crtc_helper_funcs->rcar_crtc_helper_funcs
* Updated macro DRM_RZG2L_LCDC->DRM_RZG2L_DU
* Replaced rzg2l-lcdc-drm->rzg2l-du-drm
* Added forward declaration for struct reset_control
[1] https://patchwork.kernel.org/project/linux-renesas-soc/patch/20220312084205.31462-2-biju.das.jz@bp.renesas.com/
Biju Das (5):
drm: Place Renesas drivers in a separate dir
dt-bindings: display: Document Renesas RZ/G2L DU bindings
dt-bindings: display: renesas,rzg2l-du: Document RZ/V2L DU bindings
drm: Add RZ/G2L DU Support
MAINTAINERS: Add maintainer for RZ DU drivers
.../bindings/display/renesas,rzg2l-du.yaml | 129 +++
MAINTAINERS | 16 +-
drivers/gpu/drm/Kconfig | 4 +-
drivers/gpu/drm/Makefile | 3 +-
drivers/gpu/drm/renesas/Kconfig | 5 +
drivers/gpu/drm/renesas/Makefile | 5 +
drivers/gpu/drm/{ => renesas}/rcar-du/Kconfig | 0
.../gpu/drm/{ => renesas}/rcar-du/Makefile | 0
.../gpu/drm/{ => renesas}/rcar-du/rcar_cmm.c | 0
.../gpu/drm/{ => renesas}/rcar-du/rcar_cmm.h | 0
.../drm/{ => renesas}/rcar-du/rcar_du_crtc.c | 0
.../drm/{ => renesas}/rcar-du/rcar_du_crtc.h | 0
.../drm/{ => renesas}/rcar-du/rcar_du_drv.c | 0
.../drm/{ => renesas}/rcar-du/rcar_du_drv.h | 0
.../{ => renesas}/rcar-du/rcar_du_encoder.c | 0
.../{ => renesas}/rcar-du/rcar_du_encoder.h | 0
.../drm/{ => renesas}/rcar-du/rcar_du_group.c | 0
.../drm/{ => renesas}/rcar-du/rcar_du_group.h | 0
.../drm/{ => renesas}/rcar-du/rcar_du_kms.c | 0
.../drm/{ => renesas}/rcar-du/rcar_du_kms.h | 0
.../drm/{ => renesas}/rcar-du/rcar_du_plane.c | 0
.../drm/{ => renesas}/rcar-du/rcar_du_plane.h | 0
.../drm/{ => renesas}/rcar-du/rcar_du_regs.h | 0
.../drm/{ => renesas}/rcar-du/rcar_du_vsp.c | 0
.../drm/{ => renesas}/rcar-du/rcar_du_vsp.h | 0
.../{ => renesas}/rcar-du/rcar_du_writeback.c | 0
.../{ => renesas}/rcar-du/rcar_du_writeback.h | 0
.../drm/{ => renesas}/rcar-du/rcar_dw_hdmi.c | 0
.../gpu/drm/{ => renesas}/rcar-du/rcar_lvds.c | 0
.../gpu/drm/{ => renesas}/rcar-du/rcar_lvds.h | 0
.../{ => renesas}/rcar-du/rcar_lvds_regs.h | 0
.../drm/{ => renesas}/rcar-du/rcar_mipi_dsi.c | 0
.../drm/{ => renesas}/rcar-du/rcar_mipi_dsi.h | 0
.../rcar-du/rcar_mipi_dsi_regs.h | 0
.../{ => renesas}/rcar-du/rzg2l_mipi_dsi.c | 0
.../rcar-du/rzg2l_mipi_dsi_regs.h | 0
drivers/gpu/drm/renesas/rz-du/Kconfig | 20 +
drivers/gpu/drm/renesas/rz-du/Makefile | 8 +
drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c | 714 ++++++++++++++++
drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.h | 99 +++
drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c | 188 +++++
drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h | 89 ++
.../gpu/drm/renesas/rz-du/rzg2l_du_encoder.c | 112 +++
.../gpu/drm/renesas/rz-du/rzg2l_du_encoder.h | 28 +
drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.c | 770 ++++++++++++++++++
drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.h | 43 +
drivers/gpu/drm/renesas/rz-du/rzg2l_du_regs.h | 67 ++
drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.c | 430 ++++++++++
drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.h | 94 +++
.../gpu/drm/{ => renesas}/shmobile/Kconfig | 0
.../gpu/drm/{ => renesas}/shmobile/Makefile | 0
.../shmobile/shmob_drm_backlight.c | 0
.../shmobile/shmob_drm_backlight.h | 0
.../{ => renesas}/shmobile/shmob_drm_crtc.c | 0
.../{ => renesas}/shmobile/shmob_drm_crtc.h | 0
.../{ => renesas}/shmobile/shmob_drm_drv.c | 0
.../{ => renesas}/shmobile/shmob_drm_drv.h | 0
.../{ => renesas}/shmobile/shmob_drm_kms.c | 0
.../{ => renesas}/shmobile/shmob_drm_kms.h | 0
.../{ => renesas}/shmobile/shmob_drm_plane.c | 0
.../{ => renesas}/shmobile/shmob_drm_plane.h | 0
.../{ => renesas}/shmobile/shmob_drm_regs.h | 0
62 files changed, 2816 insertions(+), 8 deletions(-)
create mode 100644 Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml
create mode 100644 drivers/gpu/drm/renesas/Kconfig
create mode 100644 drivers/gpu/drm/renesas/Makefile
rename drivers/gpu/drm/{ => renesas}/rcar-du/Kconfig (100%)
rename drivers/gpu/drm/{ => renesas}/rcar-du/Makefile (100%)
rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_cmm.c (100%)
rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_cmm.h (100%)
rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_crtc.c (100%)
rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_crtc.h (100%)
rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_drv.c (100%)
rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_drv.h (100%)
rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_encoder.c (100%)
rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_encoder.h (100%)
rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_group.c (100%)
rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_group.h (100%)
rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_kms.c (100%)
rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_kms.h (100%)
rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_plane.c (100%)
rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_plane.h (100%)
rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_regs.h (100%)
rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_vsp.c (100%)
rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_vsp.h (100%)
rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_writeback.c (100%)
rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_writeback.h (100%)
rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_dw_hdmi.c (100%)
rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_lvds.c (100%)
rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_lvds.h (100%)
rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_lvds_regs.h (100%)
rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_mipi_dsi.c (100%)
rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_mipi_dsi.h (100%)
rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_mipi_dsi_regs.h (100%)
rename drivers/gpu/drm/{ => renesas}/rcar-du/rzg2l_mipi_dsi.c (100%)
rename drivers/gpu/drm/{ => renesas}/rcar-du/rzg2l_mipi_dsi_regs.h (100%)
create mode 100644 drivers/gpu/drm/renesas/rz-du/Kconfig
create mode 100644 drivers/gpu/drm/renesas/rz-du/Makefile
create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c
create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.h
create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c
create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h
create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.c
create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.h
create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.c
create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.h
create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_regs.h
create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.c
create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.h
rename drivers/gpu/drm/{ => renesas}/shmobile/Kconfig (100%)
rename drivers/gpu/drm/{ => renesas}/shmobile/Makefile (100%)
rename drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_backlight.c (100%)
rename drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_backlight.h (100%)
rename drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_crtc.c (100%)
rename drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_crtc.h (100%)
rename drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_drv.c (100%)
rename drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_drv.h (100%)
rename drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_kms.c (100%)
rename drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_kms.h (100%)
rename drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_plane.c (100%)
rename drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_plane.h (100%)
rename drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_regs.h (100%)
--
2.25.1
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v9 RESEND 1/5] drm: Place Renesas drivers in a separate dir
2023-05-02 10:09 [PATCH v9 RESEND 0/5] Add RZ/{G2L,G2LC} and RZ/V2L Display Unit support Biju Das
@ 2023-05-02 10:09 ` Biju Das
2023-05-02 10:09 ` [PATCH v9 RESEND 2/5] dt-bindings: display: Document Renesas RZ/G2L DU bindings Biju Das
` (4 subsequent siblings)
5 siblings, 0 replies; 20+ messages in thread
From: Biju Das @ 2023-05-02 10:09 UTC (permalink / raw)
To: Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann,
David Airlie, Daniel Vetter
Cc: Biju Das, Laurent Pinchart, Kieran Bingham, Tomi Valkeinen,
Sam Ravnborg, Peter Robinson, Danilo Krummrich,
Geert Uytterhoeven, Dan Carpenter, Ville Syrjälä,
LUU HOAI, Takanari Hayama, Dmitry Baryshkov, Abhinav Kumar,
Koji Matsuoka, Marek Vasut, Liviu Dudau, Stephen Kitt,
Jani Nikula, Paul Cercueil, dri-devel, linux-renesas-soc,
Fabrizio Castro, Prabhakar Mahadev Lad
Create vendor specific renesas directory and move renesas drivers
to that directory.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
v8->v9:
* Added Rb tag from Laurent and Acked-by tag from Kieran.
v8:
* New patch
---
MAINTAINERS | 3 +--
drivers/gpu/drm/Kconfig | 4 +---
drivers/gpu/drm/Makefile | 3 +--
drivers/gpu/drm/renesas/Kconfig | 4 ++++
drivers/gpu/drm/renesas/Makefile | 4 ++++
drivers/gpu/drm/{ => renesas}/rcar-du/Kconfig | 0
drivers/gpu/drm/{ => renesas}/rcar-du/Makefile | 0
drivers/gpu/drm/{ => renesas}/rcar-du/rcar_cmm.c | 0
drivers/gpu/drm/{ => renesas}/rcar-du/rcar_cmm.h | 0
drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_crtc.c | 0
drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_crtc.h | 0
drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_drv.c | 0
drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_drv.h | 0
drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_encoder.c | 0
drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_encoder.h | 0
drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_group.c | 0
drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_group.h | 0
drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_kms.c | 0
drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_kms.h | 0
drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_plane.c | 0
drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_plane.h | 0
drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_regs.h | 0
drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_vsp.c | 0
drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_vsp.h | 0
drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_writeback.c | 0
drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_writeback.h | 0
drivers/gpu/drm/{ => renesas}/rcar-du/rcar_dw_hdmi.c | 0
drivers/gpu/drm/{ => renesas}/rcar-du/rcar_lvds.c | 0
drivers/gpu/drm/{ => renesas}/rcar-du/rcar_lvds.h | 0
drivers/gpu/drm/{ => renesas}/rcar-du/rcar_lvds_regs.h | 0
drivers/gpu/drm/{ => renesas}/rcar-du/rcar_mipi_dsi.c | 0
drivers/gpu/drm/{ => renesas}/rcar-du/rcar_mipi_dsi.h | 0
drivers/gpu/drm/{ => renesas}/rcar-du/rcar_mipi_dsi_regs.h | 0
drivers/gpu/drm/{ => renesas}/rcar-du/rzg2l_mipi_dsi.c | 0
drivers/gpu/drm/{ => renesas}/rcar-du/rzg2l_mipi_dsi_regs.h | 0
drivers/gpu/drm/{ => renesas}/shmobile/Kconfig | 0
drivers/gpu/drm/{ => renesas}/shmobile/Makefile | 0
drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_backlight.c | 0
drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_backlight.h | 0
drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_crtc.c | 0
drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_crtc.h | 0
drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_drv.c | 0
drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_drv.h | 0
drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_kms.c | 0
drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_kms.h | 0
drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_plane.c | 0
drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_plane.h | 0
drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_regs.h | 0
48 files changed, 11 insertions(+), 7 deletions(-)
create mode 100644 drivers/gpu/drm/renesas/Kconfig
create mode 100644 drivers/gpu/drm/renesas/Makefile
rename drivers/gpu/drm/{ => renesas}/rcar-du/Kconfig (100%)
rename drivers/gpu/drm/{ => renesas}/rcar-du/Makefile (100%)
rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_cmm.c (100%)
rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_cmm.h (100%)
rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_crtc.c (100%)
rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_crtc.h (100%)
rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_drv.c (100%)
rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_drv.h (100%)
rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_encoder.c (100%)
rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_encoder.h (100%)
rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_group.c (100%)
rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_group.h (100%)
rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_kms.c (100%)
rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_kms.h (100%)
rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_plane.c (100%)
rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_plane.h (100%)
rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_regs.h (100%)
rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_vsp.c (100%)
rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_vsp.h (100%)
rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_writeback.c (100%)
rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_writeback.h (100%)
rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_dw_hdmi.c (100%)
rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_lvds.c (100%)
rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_lvds.h (100%)
rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_lvds_regs.h (100%)
rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_mipi_dsi.c (100%)
rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_mipi_dsi.h (100%)
rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_mipi_dsi_regs.h (100%)
rename drivers/gpu/drm/{ => renesas}/rcar-du/rzg2l_mipi_dsi.c (100%)
rename drivers/gpu/drm/{ => renesas}/rcar-du/rzg2l_mipi_dsi_regs.h (100%)
rename drivers/gpu/drm/{ => renesas}/shmobile/Kconfig (100%)
rename drivers/gpu/drm/{ => renesas}/shmobile/Makefile (100%)
rename drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_backlight.c (100%)
rename drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_backlight.h (100%)
rename drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_crtc.c (100%)
rename drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_crtc.h (100%)
rename drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_drv.c (100%)
rename drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_drv.h (100%)
rename drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_kms.c (100%)
rename drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_kms.h (100%)
rename drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_plane.c (100%)
rename drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_plane.h (100%)
rename drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_regs.h (100%)
diff --git a/MAINTAINERS b/MAINTAINERS
index 276298cfc7ee..1218a2ec6d97 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6959,8 +6959,7 @@ F: Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml
F: Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.yaml
F: Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml
F: Documentation/devicetree/bindings/display/renesas,du.yaml
-F: drivers/gpu/drm/rcar-du/
-F: drivers/gpu/drm/shmobile/
+F: drivers/gpu/drm/renesas/
F: include/linux/platform_data/shmob_drm.h
DRM DRIVERS FOR ROCKCHIP
diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index ba3fb04bb691..41aa8b07252b 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -295,9 +295,7 @@ source "drivers/gpu/drm/armada/Kconfig"
source "drivers/gpu/drm/atmel-hlcdc/Kconfig"
-source "drivers/gpu/drm/rcar-du/Kconfig"
-
-source "drivers/gpu/drm/shmobile/Kconfig"
+source "drivers/gpu/drm/renesas/Kconfig"
source "drivers/gpu/drm/sun4i/Kconfig"
diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
index a33257d2bc7f..982d9e06168a 100644
--- a/drivers/gpu/drm/Makefile
+++ b/drivers/gpu/drm/Makefile
@@ -156,8 +156,7 @@ obj-$(CONFIG_DRM_UDL) += udl/
obj-$(CONFIG_DRM_AST) += ast/
obj-$(CONFIG_DRM_ARMADA) += armada/
obj-$(CONFIG_DRM_ATMEL_HLCDC) += atmel-hlcdc/
-obj-y += rcar-du/
-obj-$(CONFIG_DRM_SHMOBILE) +=shmobile/
+obj-y += renesas/
obj-y += omapdrm/
obj-$(CONFIG_DRM_SUN4I) += sun4i/
obj-y += tilcdc/
diff --git a/drivers/gpu/drm/renesas/Kconfig b/drivers/gpu/drm/renesas/Kconfig
new file mode 100644
index 000000000000..3777dad17f81
--- /dev/null
+++ b/drivers/gpu/drm/renesas/Kconfig
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+source "drivers/gpu/drm/renesas/rcar-du/Kconfig"
+source "drivers/gpu/drm/renesas/shmobile/Kconfig"
diff --git a/drivers/gpu/drm/renesas/Makefile b/drivers/gpu/drm/renesas/Makefile
new file mode 100644
index 000000000000..ec0e89e7a592
--- /dev/null
+++ b/drivers/gpu/drm/renesas/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
+
+obj-y += rcar-du/
+obj-$(CONFIG_DRM_SHMOBILE) += shmobile/
diff --git a/drivers/gpu/drm/rcar-du/Kconfig b/drivers/gpu/drm/renesas/rcar-du/Kconfig
similarity index 100%
rename from drivers/gpu/drm/rcar-du/Kconfig
rename to drivers/gpu/drm/renesas/rcar-du/Kconfig
diff --git a/drivers/gpu/drm/rcar-du/Makefile b/drivers/gpu/drm/renesas/rcar-du/Makefile
similarity index 100%
rename from drivers/gpu/drm/rcar-du/Makefile
rename to drivers/gpu/drm/renesas/rcar-du/Makefile
diff --git a/drivers/gpu/drm/rcar-du/rcar_cmm.c b/drivers/gpu/drm/renesas/rcar-du/rcar_cmm.c
similarity index 100%
rename from drivers/gpu/drm/rcar-du/rcar_cmm.c
rename to drivers/gpu/drm/renesas/rcar-du/rcar_cmm.c
diff --git a/drivers/gpu/drm/rcar-du/rcar_cmm.h b/drivers/gpu/drm/renesas/rcar-du/rcar_cmm.h
similarity index 100%
rename from drivers/gpu/drm/rcar-du/rcar_cmm.h
rename to drivers/gpu/drm/renesas/rcar-du/rcar_cmm.h
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c b/drivers/gpu/drm/renesas/rcar-du/rcar_du_crtc.c
similarity index 100%
rename from drivers/gpu/drm/rcar-du/rcar_du_crtc.c
rename to drivers/gpu/drm/renesas/rcar-du/rcar_du_crtc.c
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.h b/drivers/gpu/drm/renesas/rcar-du/rcar_du_crtc.h
similarity index 100%
rename from drivers/gpu/drm/rcar-du/rcar_du_crtc.h
rename to drivers/gpu/drm/renesas/rcar-du/rcar_du_crtc.h
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c b/drivers/gpu/drm/renesas/rcar-du/rcar_du_drv.c
similarity index 100%
rename from drivers/gpu/drm/rcar-du/rcar_du_drv.c
rename to drivers/gpu/drm/renesas/rcar-du/rcar_du_drv.c
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.h b/drivers/gpu/drm/renesas/rcar-du/rcar_du_drv.h
similarity index 100%
rename from drivers/gpu/drm/rcar-du/rcar_du_drv.h
rename to drivers/gpu/drm/renesas/rcar-du/rcar_du_drv.h
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_encoder.c b/drivers/gpu/drm/renesas/rcar-du/rcar_du_encoder.c
similarity index 100%
rename from drivers/gpu/drm/rcar-du/rcar_du_encoder.c
rename to drivers/gpu/drm/renesas/rcar-du/rcar_du_encoder.c
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_encoder.h b/drivers/gpu/drm/renesas/rcar-du/rcar_du_encoder.h
similarity index 100%
rename from drivers/gpu/drm/rcar-du/rcar_du_encoder.h
rename to drivers/gpu/drm/renesas/rcar-du/rcar_du_encoder.h
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_group.c b/drivers/gpu/drm/renesas/rcar-du/rcar_du_group.c
similarity index 100%
rename from drivers/gpu/drm/rcar-du/rcar_du_group.c
rename to drivers/gpu/drm/renesas/rcar-du/rcar_du_group.c
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_group.h b/drivers/gpu/drm/renesas/rcar-du/rcar_du_group.h
similarity index 100%
rename from drivers/gpu/drm/rcar-du/rcar_du_group.h
rename to drivers/gpu/drm/renesas/rcar-du/rcar_du_group.h
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_kms.c b/drivers/gpu/drm/renesas/rcar-du/rcar_du_kms.c
similarity index 100%
rename from drivers/gpu/drm/rcar-du/rcar_du_kms.c
rename to drivers/gpu/drm/renesas/rcar-du/rcar_du_kms.c
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_kms.h b/drivers/gpu/drm/renesas/rcar-du/rcar_du_kms.h
similarity index 100%
rename from drivers/gpu/drm/rcar-du/rcar_du_kms.h
rename to drivers/gpu/drm/renesas/rcar-du/rcar_du_kms.h
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_plane.c b/drivers/gpu/drm/renesas/rcar-du/rcar_du_plane.c
similarity index 100%
rename from drivers/gpu/drm/rcar-du/rcar_du_plane.c
rename to drivers/gpu/drm/renesas/rcar-du/rcar_du_plane.c
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_plane.h b/drivers/gpu/drm/renesas/rcar-du/rcar_du_plane.h
similarity index 100%
rename from drivers/gpu/drm/rcar-du/rcar_du_plane.h
rename to drivers/gpu/drm/renesas/rcar-du/rcar_du_plane.h
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_regs.h b/drivers/gpu/drm/renesas/rcar-du/rcar_du_regs.h
similarity index 100%
rename from drivers/gpu/drm/rcar-du/rcar_du_regs.h
rename to drivers/gpu/drm/renesas/rcar-du/rcar_du_regs.h
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_vsp.c b/drivers/gpu/drm/renesas/rcar-du/rcar_du_vsp.c
similarity index 100%
rename from drivers/gpu/drm/rcar-du/rcar_du_vsp.c
rename to drivers/gpu/drm/renesas/rcar-du/rcar_du_vsp.c
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_vsp.h b/drivers/gpu/drm/renesas/rcar-du/rcar_du_vsp.h
similarity index 100%
rename from drivers/gpu/drm/rcar-du/rcar_du_vsp.h
rename to drivers/gpu/drm/renesas/rcar-du/rcar_du_vsp.h
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_writeback.c b/drivers/gpu/drm/renesas/rcar-du/rcar_du_writeback.c
similarity index 100%
rename from drivers/gpu/drm/rcar-du/rcar_du_writeback.c
rename to drivers/gpu/drm/renesas/rcar-du/rcar_du_writeback.c
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_writeback.h b/drivers/gpu/drm/renesas/rcar-du/rcar_du_writeback.h
similarity index 100%
rename from drivers/gpu/drm/rcar-du/rcar_du_writeback.h
rename to drivers/gpu/drm/renesas/rcar-du/rcar_du_writeback.h
diff --git a/drivers/gpu/drm/rcar-du/rcar_dw_hdmi.c b/drivers/gpu/drm/renesas/rcar-du/rcar_dw_hdmi.c
similarity index 100%
rename from drivers/gpu/drm/rcar-du/rcar_dw_hdmi.c
rename to drivers/gpu/drm/renesas/rcar-du/rcar_dw_hdmi.c
diff --git a/drivers/gpu/drm/rcar-du/rcar_lvds.c b/drivers/gpu/drm/renesas/rcar-du/rcar_lvds.c
similarity index 100%
rename from drivers/gpu/drm/rcar-du/rcar_lvds.c
rename to drivers/gpu/drm/renesas/rcar-du/rcar_lvds.c
diff --git a/drivers/gpu/drm/rcar-du/rcar_lvds.h b/drivers/gpu/drm/renesas/rcar-du/rcar_lvds.h
similarity index 100%
rename from drivers/gpu/drm/rcar-du/rcar_lvds.h
rename to drivers/gpu/drm/renesas/rcar-du/rcar_lvds.h
diff --git a/drivers/gpu/drm/rcar-du/rcar_lvds_regs.h b/drivers/gpu/drm/renesas/rcar-du/rcar_lvds_regs.h
similarity index 100%
rename from drivers/gpu/drm/rcar-du/rcar_lvds_regs.h
rename to drivers/gpu/drm/renesas/rcar-du/rcar_lvds_regs.h
diff --git a/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c b/drivers/gpu/drm/renesas/rcar-du/rcar_mipi_dsi.c
similarity index 100%
rename from drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c
rename to drivers/gpu/drm/renesas/rcar-du/rcar_mipi_dsi.c
diff --git a/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.h b/drivers/gpu/drm/renesas/rcar-du/rcar_mipi_dsi.h
similarity index 100%
rename from drivers/gpu/drm/rcar-du/rcar_mipi_dsi.h
rename to drivers/gpu/drm/renesas/rcar-du/rcar_mipi_dsi.h
diff --git a/drivers/gpu/drm/rcar-du/rcar_mipi_dsi_regs.h b/drivers/gpu/drm/renesas/rcar-du/rcar_mipi_dsi_regs.h
similarity index 100%
rename from drivers/gpu/drm/rcar-du/rcar_mipi_dsi_regs.h
rename to drivers/gpu/drm/renesas/rcar-du/rcar_mipi_dsi_regs.h
diff --git a/drivers/gpu/drm/rcar-du/rzg2l_mipi_dsi.c b/drivers/gpu/drm/renesas/rcar-du/rzg2l_mipi_dsi.c
similarity index 100%
rename from drivers/gpu/drm/rcar-du/rzg2l_mipi_dsi.c
rename to drivers/gpu/drm/renesas/rcar-du/rzg2l_mipi_dsi.c
diff --git a/drivers/gpu/drm/rcar-du/rzg2l_mipi_dsi_regs.h b/drivers/gpu/drm/renesas/rcar-du/rzg2l_mipi_dsi_regs.h
similarity index 100%
rename from drivers/gpu/drm/rcar-du/rzg2l_mipi_dsi_regs.h
rename to drivers/gpu/drm/renesas/rcar-du/rzg2l_mipi_dsi_regs.h
diff --git a/drivers/gpu/drm/shmobile/Kconfig b/drivers/gpu/drm/renesas/shmobile/Kconfig
similarity index 100%
rename from drivers/gpu/drm/shmobile/Kconfig
rename to drivers/gpu/drm/renesas/shmobile/Kconfig
diff --git a/drivers/gpu/drm/shmobile/Makefile b/drivers/gpu/drm/renesas/shmobile/Makefile
similarity index 100%
rename from drivers/gpu/drm/shmobile/Makefile
rename to drivers/gpu/drm/renesas/shmobile/Makefile
diff --git a/drivers/gpu/drm/shmobile/shmob_drm_backlight.c b/drivers/gpu/drm/renesas/shmobile/shmob_drm_backlight.c
similarity index 100%
rename from drivers/gpu/drm/shmobile/shmob_drm_backlight.c
rename to drivers/gpu/drm/renesas/shmobile/shmob_drm_backlight.c
diff --git a/drivers/gpu/drm/shmobile/shmob_drm_backlight.h b/drivers/gpu/drm/renesas/shmobile/shmob_drm_backlight.h
similarity index 100%
rename from drivers/gpu/drm/shmobile/shmob_drm_backlight.h
rename to drivers/gpu/drm/renesas/shmobile/shmob_drm_backlight.h
diff --git a/drivers/gpu/drm/shmobile/shmob_drm_crtc.c b/drivers/gpu/drm/renesas/shmobile/shmob_drm_crtc.c
similarity index 100%
rename from drivers/gpu/drm/shmobile/shmob_drm_crtc.c
rename to drivers/gpu/drm/renesas/shmobile/shmob_drm_crtc.c
diff --git a/drivers/gpu/drm/shmobile/shmob_drm_crtc.h b/drivers/gpu/drm/renesas/shmobile/shmob_drm_crtc.h
similarity index 100%
rename from drivers/gpu/drm/shmobile/shmob_drm_crtc.h
rename to drivers/gpu/drm/renesas/shmobile/shmob_drm_crtc.h
diff --git a/drivers/gpu/drm/shmobile/shmob_drm_drv.c b/drivers/gpu/drm/renesas/shmobile/shmob_drm_drv.c
similarity index 100%
rename from drivers/gpu/drm/shmobile/shmob_drm_drv.c
rename to drivers/gpu/drm/renesas/shmobile/shmob_drm_drv.c
diff --git a/drivers/gpu/drm/shmobile/shmob_drm_drv.h b/drivers/gpu/drm/renesas/shmobile/shmob_drm_drv.h
similarity index 100%
rename from drivers/gpu/drm/shmobile/shmob_drm_drv.h
rename to drivers/gpu/drm/renesas/shmobile/shmob_drm_drv.h
diff --git a/drivers/gpu/drm/shmobile/shmob_drm_kms.c b/drivers/gpu/drm/renesas/shmobile/shmob_drm_kms.c
similarity index 100%
rename from drivers/gpu/drm/shmobile/shmob_drm_kms.c
rename to drivers/gpu/drm/renesas/shmobile/shmob_drm_kms.c
diff --git a/drivers/gpu/drm/shmobile/shmob_drm_kms.h b/drivers/gpu/drm/renesas/shmobile/shmob_drm_kms.h
similarity index 100%
rename from drivers/gpu/drm/shmobile/shmob_drm_kms.h
rename to drivers/gpu/drm/renesas/shmobile/shmob_drm_kms.h
diff --git a/drivers/gpu/drm/shmobile/shmob_drm_plane.c b/drivers/gpu/drm/renesas/shmobile/shmob_drm_plane.c
similarity index 100%
rename from drivers/gpu/drm/shmobile/shmob_drm_plane.c
rename to drivers/gpu/drm/renesas/shmobile/shmob_drm_plane.c
diff --git a/drivers/gpu/drm/shmobile/shmob_drm_plane.h b/drivers/gpu/drm/renesas/shmobile/shmob_drm_plane.h
similarity index 100%
rename from drivers/gpu/drm/shmobile/shmob_drm_plane.h
rename to drivers/gpu/drm/renesas/shmobile/shmob_drm_plane.h
diff --git a/drivers/gpu/drm/shmobile/shmob_drm_regs.h b/drivers/gpu/drm/renesas/shmobile/shmob_drm_regs.h
similarity index 100%
rename from drivers/gpu/drm/shmobile/shmob_drm_regs.h
rename to drivers/gpu/drm/renesas/shmobile/shmob_drm_regs.h
--
2.25.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v9 RESEND 2/5] dt-bindings: display: Document Renesas RZ/G2L DU bindings
2023-05-02 10:09 [PATCH v9 RESEND 0/5] Add RZ/{G2L,G2LC} and RZ/V2L Display Unit support Biju Das
2023-05-02 10:09 ` [PATCH v9 RESEND 1/5] drm: Place Renesas drivers in a separate dir Biju Das
@ 2023-05-02 10:09 ` Biju Das
2023-05-29 13:49 ` Laurent Pinchart
2023-05-02 10:09 ` [PATCH v9 RESEND 3/5] dt-bindings: display: renesas,rzg2l-du: Document RZ/V2L " Biju Das
` (3 subsequent siblings)
5 siblings, 1 reply; 20+ messages in thread
From: Biju Das @ 2023-05-02 10:09 UTC (permalink / raw)
To: David Airlie, Daniel Vetter, Rob Herring, Krzysztof Kozlowski
Cc: Biju Das, Laurent Pinchart, dri-devel, linux-renesas-soc,
devicetree, Geert Uytterhoeven, Fabrizio Castro,
Prabhakar Mahadev Lad, Rob Herring
The RZ/G2L LCD controller is composed of Frame Compression Processor
(FCPVD), Video Signal Processor (VSPD), and Display Unit (DU).
The DU module supports the following hardware features
− Display Parallel Interface (DPI) and MIPI LINK Video Interface
− Display timing master
− Generates video timings
− Selecting the polarity of output DCLK, HSYNC, VSYNC, and DE
− Supports Progressive
− Input data format (from VSPD): RGB888, RGB666
− Output data format: same as Input data format
− Supporting Full HD (1920 pixels x 1080 lines) for MIPI-DSI Output
− Supporting WXGA (1280 pixels x 800 lines) for Parallel Output
This patch document DU module found on RZ/G2L LCDC.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
v8->v9:
* No change
v7->v8:
* No change
v6->v7:
* No change
v5->v6:
* No change.
v4->v5:
* Added Rb tag from Rob.
v3->v4:
* Changed compatible name from renesas,du-r9a07g044->renesas,r9a07g044-du
* started using same compatible for RZ/G2{L,LC}
v3: New patch
---
.../bindings/display/renesas,rzg2l-du.yaml | 124 ++++++++++++++++++
1 file changed, 124 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml
diff --git a/Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml b/Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml
new file mode 100644
index 000000000000..ab99e7d57a7d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/renesas,rzg2l-du.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/G2L Display Unit (DU)
+
+maintainers:
+ - Biju Das <biju.das.jz@bp.renesas.com>
+ - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+
+description: |
+ These DT bindings describe the Display Unit embedded in the Renesas RZ/G2L
+ and RZ/V2L SoCs.
+
+properties:
+ compatible:
+ enum:
+ - renesas,r9a07g044-du # RZ/G2{L,LC}
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Main clock
+ - description: Register access clock
+ - description: Video clock
+
+ clock-names:
+ items:
+ - const: aclk
+ - const: pclk
+ - const: vclk
+
+ resets:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description: |
+ The connections to the DU output video ports are modeled using the OF
+ graph bindings specified in Documentation/devicetree/bindings/graph.txt.
+ The number of ports and their assignment are model-dependent. Each port
+ shall have a single endpoint.
+
+ patternProperties:
+ "^port@[0-1]$":
+ $ref: /schemas/graph.yaml#/properties/port
+ unevaluatedProperties: false
+
+ required:
+ - port@0
+
+ unevaluatedProperties: false
+
+ renesas,vsps:
+ $ref: "/schemas/types.yaml#/definitions/phandle-array"
+ items:
+ items:
+ - description: phandle to VSP instance that serves the DU channel
+ - description: Channel index identifying the LIF instance in that VSP
+ description:
+ A list of phandle and channel index tuples to the VSPs that handle the
+ memory interfaces for the DU channels.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - resets
+ - power-domains
+ - ports
+ - renesas,vsps
+
+additionalProperties: false
+
+examples:
+ # RZ/G2L DU
+ - |
+ #include <dt-bindings/clock/r9a07g044-cpg.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ display@10890000 {
+ compatible = "renesas,r9a07g044-du";
+ reg = <0x10890000 0x10000>;
+ interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD R9A07G044_LCDC_CLK_A>,
+ <&cpg CPG_MOD R9A07G044_LCDC_CLK_P>,
+ <&cpg CPG_MOD R9A07G044_LCDC_CLK_D>;
+ clock-names = "aclk", "pclk", "vclk";
+ resets = <&cpg R9A07G044_LCDC_RESET_N>;
+ power-domains = <&cpg>;
+
+ renesas,vsps = <&vspd0 0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ endpoint {
+ };
+ };
+ };
+ };
+
+...
--
2.25.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v9 RESEND 3/5] dt-bindings: display: renesas,rzg2l-du: Document RZ/V2L DU bindings
2023-05-02 10:09 [PATCH v9 RESEND 0/5] Add RZ/{G2L,G2LC} and RZ/V2L Display Unit support Biju Das
2023-05-02 10:09 ` [PATCH v9 RESEND 1/5] drm: Place Renesas drivers in a separate dir Biju Das
2023-05-02 10:09 ` [PATCH v9 RESEND 2/5] dt-bindings: display: Document Renesas RZ/G2L DU bindings Biju Das
@ 2023-05-02 10:09 ` Biju Das
2023-05-02 10:09 ` [PATCH v9 RESEND 4/5] drm: Add RZ/G2L DU Support Biju Das
` (2 subsequent siblings)
5 siblings, 0 replies; 20+ messages in thread
From: Biju Das @ 2023-05-02 10:09 UTC (permalink / raw)
To: David Airlie, Daniel Vetter, Rob Herring, Krzysztof Kozlowski
Cc: Biju Das, Laurent Pinchart, dri-devel, linux-renesas-soc,
devicetree, Geert Uytterhoeven, Fabrizio Castro,
Prabhakar Mahadev Lad, Rob Herring
Document DU found in RZ/V2L SoC. The DU block is identical to RZ/G2L
SoC and therefore use RZ/G2L fallback to avoid any driver changes.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
V8->v9:
* Added Rb tag from Laurent and Geert.
v7->v8:
* Fixed the typo vsp2->du
* Added Rb tag from Rob as the change is trivial.
v7:
* New patch.
---
.../devicetree/bindings/display/renesas,rzg2l-du.yaml | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml b/Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml
index ab99e7d57a7d..98686ea84d53 100644
--- a/Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml
+++ b/Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml
@@ -16,8 +16,13 @@ description: |
properties:
compatible:
- enum:
- - renesas,r9a07g044-du # RZ/G2{L,LC}
+ oneOf:
+ - enum:
+ - renesas,r9a07g044-du # RZ/G2{L,LC}
+ - items:
+ - enum:
+ - renesas,r9a07g054-du # RZ/V2L
+ - const: renesas,r9a07g044-du # RZ/G2L fallback
reg:
maxItems: 1
--
2.25.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v9 RESEND 4/5] drm: Add RZ/G2L DU Support
2023-05-02 10:09 [PATCH v9 RESEND 0/5] Add RZ/{G2L,G2LC} and RZ/V2L Display Unit support Biju Das
` (2 preceding siblings ...)
2023-05-02 10:09 ` [PATCH v9 RESEND 3/5] dt-bindings: display: renesas,rzg2l-du: Document RZ/V2L " Biju Das
@ 2023-05-02 10:09 ` Biju Das
2023-05-29 15:43 ` Laurent Pinchart
2023-05-02 10:09 ` [PATCH v9 RESEND 5/5] MAINTAINERS: Add maintainer for RZ DU drivers Biju Das
2023-05-15 7:57 ` [PATCH v9 RESEND 0/5] Add RZ/{G2L,G2LC} and RZ/V2L Display Unit support Biju Das
5 siblings, 1 reply; 20+ messages in thread
From: Biju Das @ 2023-05-02 10:09 UTC (permalink / raw)
To: David Airlie, Daniel Vetter, Philipp Zabel
Cc: Biju Das, Kieran Bingham, Laurent Pinchart, dri-devel,
linux-renesas-soc, Geert Uytterhoeven, Fabrizio Castro,
Prabhakar Mahadev Lad
The LCD controller is composed of Frame Compression Processor (FCPVD),
Video Signal Processor (VSPD), and Display Unit (DU).
It has DPI/DSI interfaces and supports a maximum resolution of 1080p
along with 2 RPFs to support the blending of two picture layers and
raster operations (ROPs).
The DU module is connected to VSPD. Add RZ/G2L DU support for RZ/G2L
alike SoCs.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
Ref:
https://lore.kernel.org/linux-renesas-soc/OS0PR01MB5922717E4CCFE07F3C25FBC986989@OS0PR01MB5922.jpnprd01.prod.outlook.com/#t
v8->v9:
* Dropped reset_control_assert() from error patch for rzg2l_du_crtc_get() as
suggested by Philipp Zabel.
v7->v8:
* Dropped RCar du lib and created RZ/G2L DU DRM driver by creating rz_du folder.
* Updated KConfig and Makefile.
v6->v7:
* Split DU lib and RZ/G2L du driver as separate patch series as
DU support added to more platforms based on RZ/G2L alike SoCs.
* Rebased to latest drm-tip.
* Added patch #2 for binding support for RZ/V2L DU
* Added patch #4 for driver support for RZ/V2L DU
* Added patch #5 for SoC DTSI support for RZ/G2L DU
* Added patch #6 for SoC DTSI support for RZ/V2L DU
* Added patch #7 for Enabling DU on SMARC EVK based on RZ/{G2L,V2L} SoCs.
* Added patch #8 for Enabling DU on SMARC EVK based on RZ/G2LC SoC.
---
drivers/gpu/drm/renesas/Kconfig | 1 +
drivers/gpu/drm/renesas/Makefile | 1 +
drivers/gpu/drm/renesas/rz-du/Kconfig | 20 +
drivers/gpu/drm/renesas/rz-du/Makefile | 8 +
drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c | 714 ++++++++++++++++
drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.h | 99 +++
drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c | 188 +++++
drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h | 89 ++
.../gpu/drm/renesas/rz-du/rzg2l_du_encoder.c | 112 +++
.../gpu/drm/renesas/rz-du/rzg2l_du_encoder.h | 28 +
drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.c | 770 ++++++++++++++++++
drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.h | 43 +
drivers/gpu/drm/renesas/rz-du/rzg2l_du_regs.h | 67 ++
drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.c | 430 ++++++++++
drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.h | 94 +++
15 files changed, 2664 insertions(+)
create mode 100644 drivers/gpu/drm/renesas/rz-du/Kconfig
create mode 100644 drivers/gpu/drm/renesas/rz-du/Makefile
create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c
create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.h
create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c
create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h
create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.c
create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.h
create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.c
create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.h
create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_regs.h
create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.c
create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.h
diff --git a/drivers/gpu/drm/renesas/Kconfig b/drivers/gpu/drm/renesas/Kconfig
index 3777dad17f81..21862a8ef710 100644
--- a/drivers/gpu/drm/renesas/Kconfig
+++ b/drivers/gpu/drm/renesas/Kconfig
@@ -1,4 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-only
source "drivers/gpu/drm/renesas/rcar-du/Kconfig"
+source "drivers/gpu/drm/renesas/rz-du/Kconfig"
source "drivers/gpu/drm/renesas/shmobile/Kconfig"
diff --git a/drivers/gpu/drm/renesas/Makefile b/drivers/gpu/drm/renesas/Makefile
index ec0e89e7a592..b8d8bc53967f 100644
--- a/drivers/gpu/drm/renesas/Makefile
+++ b/drivers/gpu/drm/renesas/Makefile
@@ -1,4 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
obj-y += rcar-du/
+obj-y += rz-du/
obj-$(CONFIG_DRM_SHMOBILE) += shmobile/
diff --git a/drivers/gpu/drm/renesas/rz-du/Kconfig b/drivers/gpu/drm/renesas/rz-du/Kconfig
new file mode 100644
index 000000000000..90b1bf72e23b
--- /dev/null
+++ b/drivers/gpu/drm/renesas/rz-du/Kconfig
@@ -0,0 +1,20 @@
+# SPDX-License-Identifier: GPL-2.0
+config DRM_RZG2L_DU
+ tristate "DRM Support for RZ/G2L Display Unit"
+ depends on DRM && OF
+ depends on ARM64
+ depends on DRM_RCAR_VSP
+ depends on ARCH_RZG2L || COMPILE_TEST
+ select DRM_KMS_HELPER
+ select DRM_GEM_DMA_HELPER
+ select VIDEOMODE_HELPERS
+ help
+ Choose this option if you have an RZ/G2L alike chipset.
+ If M is selected the module will be called rzg2l-du-drm.
+
+config DRM_RCAR_VSP
+ bool "R-Car DU VSP Compositor Support" if ARM
+ default y if ARM64
+ depends on VIDEO_RENESAS_VSP1
+ help
+ Enable support to expose the R-Car VSP Compositor as KMS planes.
diff --git a/drivers/gpu/drm/renesas/rz-du/Makefile b/drivers/gpu/drm/renesas/rz-du/Makefile
new file mode 100644
index 000000000000..2cdf3ccd0459
--- /dev/null
+++ b/drivers/gpu/drm/renesas/rz-du/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0
+rzg2l-du-drm-y := rzg2l_du_crtc.o \
+ rzg2l_du_drv.o \
+ rzg2l_du_encoder.o \
+ rzg2l_du_kms.o \
+
+rzg2l-du-drm-$(CONFIG_DRM_RCAR_VSP) += rzg2l_du_vsp.o
+obj-$(CONFIG_DRM_RZG2L_DU) += rzg2l-du-drm.o
diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c
new file mode 100644
index 000000000000..d61d433d72e6
--- /dev/null
+++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c
@@ -0,0 +1,714 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * RZ/G2L Display Unit CRTCs
+ *
+ * Copyright (C) 2023 Renesas Electronics Corporation
+ *
+ * Based on rcar_du_crtc.c
+ */
+
+#include <linux/clk.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+
+#include <drm/drm_atomic.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_bridge.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_device.h>
+#include <drm/drm_framebuffer.h>
+#include <drm/drm_gem_dma_helper.h>
+#include <drm/drm_vblank.h>
+
+#include "rzg2l_du_crtc.h"
+#include "rzg2l_du_drv.h"
+#include "rzg2l_du_encoder.h"
+#include "rzg2l_du_kms.h"
+#include "rzg2l_du_vsp.h"
+#include "rzg2l_du_regs.h"
+
+/* -----------------------------------------------------------------------------
+ * Hardware Setup
+ */
+
+static void rzg2l_du_crtc_set_display_timing(struct rzg2l_du_crtc *rcrtc)
+{
+ const struct drm_display_mode *mode = &rcrtc->crtc.state->adjusted_mode;
+ struct rzg2l_du_device *rcdu = rcrtc->dev;
+ unsigned long mode_clock = mode->clock * 1000;
+ u32 ditr0, ditr1, ditr2, ditr3, ditr4, ditr5, pbcr0;
+ struct clk *parent_clk;
+
+ parent_clk = clk_get_parent(rcrtc->rzg2l_clocks.dclk);
+ clk_set_rate(parent_clk, mode_clock);
+
+ clk_prepare_enable(rcrtc->rzg2l_clocks.dclk);
+
+ ditr0 = (DU_DITR0_DEMD_HIGH
+ | ((mode->flags & DRM_MODE_FLAG_PVSYNC) ? DU_DITR0_VSPOL : 0)
+ | ((mode->flags & DRM_MODE_FLAG_PHSYNC) ? DU_DITR0_HSPOL : 0));
+
+ ditr1 = DU_DITR1_VSA(mode->vsync_end - mode->vsync_start)
+ | DU_DITR1_VACTIVE(mode->vdisplay);
+
+ ditr2 = DU_DITR2_VBP(mode->vtotal - mode->vsync_end)
+ | DU_DITR2_VFP(mode->vsync_start - mode->vdisplay);
+
+ ditr3 = DU_DITR3_HSA(mode->hsync_end - mode->hsync_start)
+ | DU_DITR3_HACTIVE(mode->hdisplay);
+
+ ditr4 = DU_DITR4_HBP(mode->htotal - mode->hsync_end)
+ | DU_DITR4_HFP(mode->hsync_start - mode->hdisplay);
+
+ ditr5 = DU_DITR5_VSFT(0) | DU_DITR5_HSFT(0);
+
+ pbcr0 = DU_PBCR0_PB_DEP(0x1f);
+
+ writel(ditr0, rcdu->mmio + DU_DITR0);
+ writel(ditr1, rcdu->mmio + DU_DITR1);
+ writel(ditr2, rcdu->mmio + DU_DITR2);
+ writel(ditr3, rcdu->mmio + DU_DITR3);
+ writel(ditr4, rcdu->mmio + DU_DITR4);
+ writel(ditr5, rcdu->mmio + DU_DITR5);
+ writel(pbcr0, rcdu->mmio + DU_PBCR0);
+
+ /* Enable auto resume when underrun */
+ writel(DU_MCR1_PB_AUTOCLR, rcdu->mmio + DU_MCR1);
+}
+
+/* -----------------------------------------------------------------------------
+ * Page Flip
+ */
+
+void rzg2l_du_crtc_finish_page_flip(struct rzg2l_du_crtc *rcrtc)
+{
+ struct drm_pending_vblank_event *event;
+ struct drm_device *dev = rcrtc->crtc.dev;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->event_lock, flags);
+ event = rcrtc->event;
+ rcrtc->event = NULL;
+ spin_unlock_irqrestore(&dev->event_lock, flags);
+
+ if (!event)
+ return;
+
+ spin_lock_irqsave(&dev->event_lock, flags);
+ drm_crtc_send_vblank_event(&rcrtc->crtc, event);
+ wake_up(&rcrtc->flip_wait);
+ spin_unlock_irqrestore(&dev->event_lock, flags);
+
+ drm_crtc_vblank_put(&rcrtc->crtc);
+}
+
+static bool rzg2l_du_crtc_page_flip_pending(struct rzg2l_du_crtc *rcrtc)
+{
+ struct drm_device *dev = rcrtc->crtc.dev;
+ unsigned long flags;
+ bool pending;
+
+ spin_lock_irqsave(&dev->event_lock, flags);
+ pending = rcrtc->event;
+ spin_unlock_irqrestore(&dev->event_lock, flags);
+
+ return pending;
+}
+
+static void rzg2l_du_crtc_wait_page_flip(struct rzg2l_du_crtc *rcrtc)
+{
+ struct rzg2l_du_device *rcdu = rcrtc->dev;
+
+ if (wait_event_timeout(rcrtc->flip_wait,
+ !rzg2l_du_crtc_page_flip_pending(rcrtc),
+ msecs_to_jiffies(50)))
+ return;
+
+ dev_warn(rcdu->dev, "page flip timeout\n");
+
+ rzg2l_du_crtc_finish_page_flip(rcrtc);
+}
+
+/* -----------------------------------------------------------------------------
+ * Start/Stop and Suspend/Resume
+ */
+
+static void rzg2l_du_crtc_setup(struct rzg2l_du_crtc *rcrtc)
+{
+ /* Configure display timings and output routing */
+ rzg2l_du_crtc_set_display_timing(rcrtc);
+
+ /* Enable the VSP compositor. */
+ rzg2l_du_vsp_enable(rcrtc);
+
+ /* Turn vertical blanking interrupt reporting on. */
+ drm_crtc_vblank_on(&rcrtc->crtc);
+}
+
+static int rzg2l_du_crtc_get(struct rzg2l_du_crtc *rcrtc)
+{
+ int ret;
+
+ /*
+ * Guard against double-get, as the function is called from both the
+ * .atomic_enable() and .atomic_begin() handlers.
+ */
+ if (rcrtc->initialized)
+ return 0;
+
+ ret = clk_prepare_enable(rcrtc->rzg2l_clocks.aclk);
+ if (ret < 0)
+ return ret;
+
+ ret = clk_prepare_enable(rcrtc->rzg2l_clocks.pclk);
+ if (ret < 0)
+ goto error_bus_clock;
+
+ ret = reset_control_deassert(rcrtc->rstc);
+ if (ret < 0)
+ goto error_peri_clock;
+
+ rzg2l_du_crtc_setup(rcrtc);
+ rcrtc->initialized = true;
+
+ return 0;
+
+error_peri_clock:
+ clk_disable_unprepare(rcrtc->rzg2l_clocks.pclk);
+error_bus_clock:
+ clk_disable_unprepare(rcrtc->rzg2l_clocks.aclk);
+ return ret;
+}
+
+static void rzg2l_du_crtc_put(struct rzg2l_du_crtc *rcrtc)
+{
+ clk_disable_unprepare(rcrtc->rzg2l_clocks.dclk);
+ reset_control_assert(rcrtc->rstc);
+ clk_disable_unprepare(rcrtc->rzg2l_clocks.pclk);
+ clk_disable_unprepare(rcrtc->rzg2l_clocks.aclk);
+
+ rcrtc->initialized = false;
+}
+
+static void rzg2l_du_start_stop(struct rzg2l_du_crtc *rcrtc, bool start)
+{
+ struct rzg2l_du_device *rcdu = rcrtc->dev;
+
+ writel(start ? DU_MCR0_DI_EN : 0, rcdu->mmio + DU_MCR0);
+}
+
+static void rzg2l_du_crtc_start(struct rzg2l_du_crtc *rcrtc)
+{
+ rzg2l_du_start_stop(rcrtc, true);
+}
+
+static void rzg2l_du_crtc_disable_planes(struct rzg2l_du_crtc *rcrtc)
+{
+ struct rzg2l_du_device *rcdu = rcrtc->dev;
+ struct drm_crtc *crtc = &rcrtc->crtc;
+
+ /* Make sure vblank interrupts are enabled. */
+ drm_crtc_vblank_get(crtc);
+
+ if (!wait_event_timeout(rcrtc->vblank_wait, rcrtc->vblank_count == 0,
+ msecs_to_jiffies(100)))
+ dev_warn(rcdu->dev, "vertical blanking timeout\n");
+
+ drm_crtc_vblank_put(crtc);
+}
+
+static void rzg2l_du_crtc_stop(struct rzg2l_du_crtc *rcrtc)
+{
+ struct drm_crtc *crtc = &rcrtc->crtc;
+
+ /*
+ * Disable all planes and wait for the change to take effect. This is
+ * required as the plane enable registers are updated on vblank, and no
+ * vblank will occur once the CRTC is stopped. Disabling planes when
+ * starting the CRTC thus wouldn't be enough as it would start scanning
+ * out immediately from old frame buffers until the next vblank.
+ *
+ * This increases the CRTC stop delay, especially when multiple CRTCs
+ * are stopped in one operation as we now wait for one vblank per CRTC.
+ * Whether this can be improved needs to be researched.
+ */
+ rzg2l_du_crtc_disable_planes(rcrtc);
+
+ /*
+ * Disable vertical blanking interrupt reporting. We first need to wait
+ * for page flip completion before stopping the CRTC as userspace
+ * expects page flips to eventually complete.
+ */
+ rzg2l_du_crtc_wait_page_flip(rcrtc);
+ drm_crtc_vblank_off(crtc);
+
+ /* Disable the VSP compositor. */
+ rzg2l_du_vsp_disable(rcrtc);
+
+ rzg2l_du_start_stop(rcrtc, false);
+}
+
+/* -----------------------------------------------------------------------------
+ * CRTC Functions
+ */
+
+int __rzg2l_du_crtc_plane_atomic_check(struct drm_plane *plane,
+ struct drm_plane_state *state,
+ const struct rzg2l_du_format_info **format)
+{
+ struct drm_device *dev = plane->dev;
+ struct drm_crtc_state *crtc_state;
+ int ret;
+
+ if (!state->crtc) {
+ /*
+ * The visible field is not reset by the DRM core but only
+ * updated by drm_plane_helper_check_state(), set it manually.
+ */
+ state->visible = false;
+ *format = NULL;
+ return 0;
+ }
+
+ crtc_state = drm_atomic_get_crtc_state(state->state, state->crtc);
+ if (IS_ERR(crtc_state))
+ return PTR_ERR(crtc_state);
+
+ ret = drm_atomic_helper_check_plane_state(state, crtc_state,
+ DRM_PLANE_NO_SCALING,
+ DRM_PLANE_NO_SCALING,
+ true, true);
+ if (ret < 0)
+ return ret;
+
+ if (!state->visible) {
+ *format = NULL;
+ return 0;
+ }
+
+ *format = rzg2l_du_format_info(state->fb->format->format);
+ if (*format == NULL) {
+ dev_dbg(dev->dev, "%s: unsupported format %08x\n", __func__,
+ state->fb->format->format);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int rzg2l_du_crtc_atomic_check(struct drm_crtc *crtc,
+ struct drm_atomic_state *state)
+{
+ struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state,
+ crtc);
+ struct rzg2l_du_crtc_state *rstate = to_rzg2l_crtc_state(crtc_state);
+ struct drm_encoder *encoder;
+
+ /* Store the routes from the CRTC output to the DU outputs. */
+ rstate->outputs = 0;
+
+ drm_for_each_encoder_mask(encoder, crtc->dev,
+ crtc_state->encoder_mask) {
+ struct rzg2l_du_encoder *renc;
+
+ /* Skip the writeback encoder. */
+ if (encoder->encoder_type == DRM_MODE_ENCODER_VIRTUAL)
+ continue;
+
+ renc = to_rzg2l_encoder(encoder);
+ rstate->outputs |= BIT(renc->output);
+ }
+
+ return 0;
+}
+
+static void rzg2l_du_crtc_atomic_enable(struct drm_crtc *crtc,
+ struct drm_atomic_state *state)
+{
+ struct rzg2l_du_crtc *rcrtc = to_rzg2l_crtc(crtc);
+
+ rzg2l_du_crtc_get(rcrtc);
+
+ rzg2l_du_crtc_start(rcrtc);
+}
+
+static void rzg2l_du_crtc_atomic_disable(struct drm_crtc *crtc,
+ struct drm_atomic_state *state)
+{
+ struct rzg2l_du_crtc *rcrtc = to_rzg2l_crtc(crtc);
+
+ rzg2l_du_crtc_stop(rcrtc);
+ rzg2l_du_crtc_put(rcrtc);
+
+ spin_lock_irq(&crtc->dev->event_lock);
+ if (crtc->state->event) {
+ drm_crtc_send_vblank_event(crtc, crtc->state->event);
+ crtc->state->event = NULL;
+ }
+ spin_unlock_irq(&crtc->dev->event_lock);
+}
+
+static void rzg2l_du_crtc_atomic_begin(struct drm_crtc *crtc,
+ struct drm_atomic_state *state)
+{
+ struct rzg2l_du_crtc *rcrtc = to_rzg2l_crtc(crtc);
+
+ WARN_ON(!crtc->state->enable);
+
+ /*
+ * If a mode set is in progress we can be called with the CRTC disabled.
+ * We thus need to first get and setup the CRTC in order to configure
+ * planes. We must *not* put the CRTC in .atomic_flush(), as it must be
+ * kept awake until the .atomic_enable() call that will follow. The get
+ * operation in .atomic_enable() will in that case be a no-op, and the
+ * CRTC will be put later in .atomic_disable().
+ *
+ * If a mode set is not in progress the CRTC is enabled, and the
+ * following get call will be a no-op. There is thus no need to balance
+ * it in .atomic_flush() either.
+ */
+ rzg2l_du_crtc_get(rcrtc);
+
+ rzg2l_du_vsp_atomic_begin(rcrtc);
+}
+
+static void rzg2l_du_crtc_atomic_flush(struct drm_crtc *crtc,
+ struct drm_atomic_state *state)
+{
+ struct rzg2l_du_crtc *rcrtc = to_rzg2l_crtc(crtc);
+ struct drm_device *dev = rcrtc->crtc.dev;
+ unsigned long flags;
+
+ if (crtc->state->event) {
+ WARN_ON(drm_crtc_vblank_get(crtc) != 0);
+
+ spin_lock_irqsave(&dev->event_lock, flags);
+ rcrtc->event = crtc->state->event;
+ crtc->state->event = NULL;
+ spin_unlock_irqrestore(&dev->event_lock, flags);
+ }
+
+ rzg2l_du_vsp_atomic_flush(rcrtc);
+}
+
+static const struct drm_crtc_helper_funcs crtc_helper_funcs = {
+ .atomic_check = rzg2l_du_crtc_atomic_check,
+ .atomic_begin = rzg2l_du_crtc_atomic_begin,
+ .atomic_flush = rzg2l_du_crtc_atomic_flush,
+ .atomic_enable = rzg2l_du_crtc_atomic_enable,
+ .atomic_disable = rzg2l_du_crtc_atomic_disable,
+};
+
+static void rzg2l_du_crtc_crc_init(struct rzg2l_du_crtc *rcrtc)
+{
+ const char **sources;
+ unsigned int count;
+ int i = -1;
+
+ /* Reserve 1 for "auto" source. */
+ count = rcrtc->vsp->num_planes + 1;
+
+ sources = kmalloc_array(count, sizeof(*sources), GFP_KERNEL);
+ if (!sources)
+ return;
+
+ sources[0] = kstrdup("auto", GFP_KERNEL);
+ if (!sources[0])
+ goto error;
+
+ for (i = 0; i < rcrtc->vsp->num_planes; ++i) {
+ struct drm_plane *plane = &rcrtc->vsp->planes[i].plane;
+ char name[16];
+
+ sprintf(name, "plane%u", plane->base.id);
+ sources[i + 1] = kstrdup(name, GFP_KERNEL);
+ if (!sources[i + 1])
+ goto error;
+ }
+
+ rcrtc->sources = sources;
+ rcrtc->sources_count = count;
+ return;
+
+error:
+ while (i >= 0) {
+ kfree(sources[i]);
+ i--;
+ }
+ kfree(sources);
+}
+
+static void rzg2l_du_crtc_crc_cleanup(struct rzg2l_du_crtc *rcrtc)
+{
+ unsigned int i;
+
+ if (!rcrtc->sources)
+ return;
+
+ for (i = 0; i < rcrtc->sources_count; i++)
+ kfree(rcrtc->sources[i]);
+ kfree(rcrtc->sources);
+
+ rcrtc->sources = NULL;
+ rcrtc->sources_count = 0;
+}
+
+static struct drm_crtc_state *
+rzg2l_du_crtc_atomic_duplicate_state(struct drm_crtc *crtc)
+{
+ struct rzg2l_du_crtc_state *state;
+ struct rzg2l_du_crtc_state *copy;
+
+ if (WARN_ON(!crtc->state))
+ return NULL;
+
+ state = to_rzg2l_crtc_state(crtc->state);
+ copy = kmemdup(state, sizeof(*state), GFP_KERNEL);
+ if (!copy)
+ return NULL;
+
+ __drm_atomic_helper_crtc_duplicate_state(crtc, ©->state);
+
+ return ©->state;
+}
+
+static void rzg2l_du_crtc_atomic_destroy_state(struct drm_crtc *crtc,
+ struct drm_crtc_state *state)
+{
+ __drm_atomic_helper_crtc_destroy_state(state);
+ kfree(to_rzg2l_crtc_state(state));
+}
+
+static void rzg2l_du_crtc_cleanup(struct drm_crtc *crtc)
+{
+ struct rzg2l_du_crtc *rcrtc = to_rzg2l_crtc(crtc);
+
+ rzg2l_du_crtc_crc_cleanup(rcrtc);
+
+ return drm_crtc_cleanup(crtc);
+}
+
+static void rzg2l_du_crtc_reset(struct drm_crtc *crtc)
+{
+ struct rzg2l_du_crtc_state *state;
+
+ if (crtc->state) {
+ rzg2l_du_crtc_atomic_destroy_state(crtc, crtc->state);
+ crtc->state = NULL;
+ }
+
+ state = kzalloc(sizeof(*state), GFP_KERNEL);
+ if (!state)
+ return;
+
+ state->crc.source = VSP1_DU_CRC_NONE;
+ state->crc.index = 0;
+
+ __drm_atomic_helper_crtc_reset(crtc, &state->state);
+}
+
+static int rzg2l_du_crtc_enable_vblank(struct drm_crtc *crtc)
+{
+ struct rzg2l_du_crtc *rcrtc = to_rzg2l_crtc(crtc);
+
+ rcrtc->vblank_enable = true;
+
+ return 0;
+}
+
+static void rzg2l_du_crtc_disable_vblank(struct drm_crtc *crtc)
+{
+ struct rzg2l_du_crtc *rcrtc = to_rzg2l_crtc(crtc);
+
+ rcrtc->vblank_enable = false;
+}
+
+static int rzg2l_du_crtc_parse_crc_source(struct rzg2l_du_crtc *rcrtc,
+ const char *source_name,
+ enum vsp1_du_crc_source *source)
+{
+ unsigned int index;
+ int ret;
+
+ /*
+ * Parse the source name. Supported values are "plane%u" to compute the
+ * CRC on an input plane (%u is the plane ID), and "auto" to compute the
+ * CRC on the composer (VSP) output.
+ */
+
+ if (!source_name) {
+ *source = VSP1_DU_CRC_NONE;
+ return 0;
+ } else if (!strcmp(source_name, "auto")) {
+ *source = VSP1_DU_CRC_OUTPUT;
+ return 0;
+ } else if (strstarts(source_name, "plane")) {
+ unsigned int i;
+
+ *source = VSP1_DU_CRC_PLANE;
+
+ ret = kstrtouint(source_name + strlen("plane"), 10, &index);
+ if (ret < 0)
+ return ret;
+
+ for (i = 0; i < rcrtc->vsp->num_planes; ++i) {
+ if (index == rcrtc->vsp->planes[i].plane.base.id)
+ return i;
+ }
+ }
+
+ return -EINVAL;
+}
+
+static int rzg2l_du_crtc_verify_crc_source(struct drm_crtc *crtc,
+ const char *source_name,
+ size_t *values_cnt)
+{
+ struct rzg2l_du_crtc *rcrtc = to_rzg2l_crtc(crtc);
+ enum vsp1_du_crc_source source;
+
+ if (rzg2l_du_crtc_parse_crc_source(rcrtc, source_name, &source) < 0) {
+ DRM_DEBUG_DRIVER("unknown source %s\n", source_name);
+ return -EINVAL;
+ }
+
+ *values_cnt = 1;
+ return 0;
+}
+
+static const char *const *
+rzg2l_du_crtc_get_crc_sources(struct drm_crtc *crtc, size_t *count)
+{
+ struct rzg2l_du_crtc *rcrtc = to_rzg2l_crtc(crtc);
+
+ *count = rcrtc->sources_count;
+ return rcrtc->sources;
+}
+
+static int rzg2l_du_crtc_set_crc_source(struct drm_crtc *crtc,
+ const char *source_name)
+{
+ struct rzg2l_du_crtc *rcrtc = to_rzg2l_crtc(crtc);
+ struct drm_modeset_acquire_ctx ctx;
+ struct drm_crtc_state *crtc_state;
+ struct drm_atomic_state *state;
+ enum vsp1_du_crc_source source;
+ unsigned int index;
+ int ret;
+
+ ret = rzg2l_du_crtc_parse_crc_source(rcrtc, source_name, &source);
+ if (ret < 0)
+ return ret;
+
+ index = ret;
+
+ /* Perform an atomic commit to set the CRC source. */
+ drm_modeset_acquire_init(&ctx, 0);
+
+ state = drm_atomic_state_alloc(crtc->dev);
+ if (!state) {
+ ret = -ENOMEM;
+ goto unlock;
+ }
+
+ state->acquire_ctx = &ctx;
+
+retry:
+ crtc_state = drm_atomic_get_crtc_state(state, crtc);
+ if (!IS_ERR(crtc_state)) {
+ struct rzg2l_du_crtc_state *rcrtc_state;
+
+ rcrtc_state = to_rzg2l_crtc_state(crtc_state);
+ rcrtc_state->crc.source = source;
+ rcrtc_state->crc.index = index;
+
+ ret = drm_atomic_commit(state);
+ } else {
+ ret = PTR_ERR(crtc_state);
+ }
+
+ if (ret == -EDEADLK) {
+ drm_atomic_state_clear(state);
+ drm_modeset_backoff(&ctx);
+ goto retry;
+ }
+
+ drm_atomic_state_put(state);
+
+unlock:
+ drm_modeset_drop_locks(&ctx);
+ drm_modeset_acquire_fini(&ctx);
+
+ return ret;
+}
+
+static const struct drm_crtc_funcs crtc_funcs_rz = {
+ .reset = rzg2l_du_crtc_reset,
+ .destroy = rzg2l_du_crtc_cleanup,
+ .set_config = drm_atomic_helper_set_config,
+ .page_flip = drm_atomic_helper_page_flip,
+ .atomic_duplicate_state = rzg2l_du_crtc_atomic_duplicate_state,
+ .atomic_destroy_state = rzg2l_du_crtc_atomic_destroy_state,
+ .enable_vblank = rzg2l_du_crtc_enable_vblank,
+ .disable_vblank = rzg2l_du_crtc_disable_vblank,
+ .set_crc_source = rzg2l_du_crtc_set_crc_source,
+ .verify_crc_source = rzg2l_du_crtc_verify_crc_source,
+ .get_crc_sources = rzg2l_du_crtc_get_crc_sources,
+};
+
+/* -----------------------------------------------------------------------------
+ * Initialization
+ */
+
+int rzg2l_du_crtc_create(struct rzg2l_du_device *rcdu)
+{
+ struct rzg2l_du_crtc *rcrtc = &rcdu->crtcs[0];
+ struct drm_crtc *crtc = &rcrtc->crtc;
+ struct drm_plane *primary;
+ int ret;
+
+ rcrtc->rstc = devm_reset_control_get_shared(rcdu->dev, NULL);
+ if (IS_ERR(rcrtc->rstc)) {
+ dev_err(rcdu->dev, "can't get cpg reset\n");
+ return PTR_ERR(rcrtc->rstc);
+ }
+
+ rcrtc->rzg2l_clocks.aclk = devm_clk_get(rcdu->dev, "aclk");
+ if (IS_ERR(rcrtc->rzg2l_clocks.aclk)) {
+ dev_err(rcdu->dev, "no axi clock for DU\n");
+ return PTR_ERR(rcrtc->rzg2l_clocks.aclk);
+ }
+
+ rcrtc->rzg2l_clocks.pclk = devm_clk_get(rcdu->dev, "pclk");
+ if (IS_ERR(rcrtc->rzg2l_clocks.pclk)) {
+ dev_err(rcdu->dev, "no peripheral clock for DU\n");
+ return PTR_ERR(rcrtc->rzg2l_clocks.pclk);
+ }
+
+ rcrtc->rzg2l_clocks.dclk = devm_clk_get(rcdu->dev, "vclk");
+ if (IS_ERR(rcrtc->rzg2l_clocks.dclk)) {
+ dev_err(rcdu->dev, "no video clock for DU\n");
+ return PTR_ERR(rcrtc->rzg2l_clocks.dclk);
+ }
+
+ init_waitqueue_head(&rcrtc->flip_wait);
+ init_waitqueue_head(&rcrtc->vblank_wait);
+ spin_lock_init(&rcrtc->vblank_lock);
+
+ rcrtc->dev = rcdu;
+ rcrtc->index = 0;
+
+ primary = &rcrtc->vsp->planes[rcrtc->vsp_pipe].plane;
+
+ ret = drm_crtc_init_with_planes(&rcdu->ddev, crtc, primary, NULL,
+ &crtc_funcs_rz, NULL);
+ if (ret < 0)
+ return ret;
+
+ drm_crtc_helper_add(crtc, &crtc_helper_funcs);
+
+ rzg2l_du_crtc_crc_init(rcrtc);
+
+ return 0;
+}
diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.h b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.h
new file mode 100644
index 000000000000..290b5ea99545
--- /dev/null
+++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.h
@@ -0,0 +1,99 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * RZ/G2L Display Unit CRTCs
+ *
+ * Copyright (C) 2023 Renesas Electronics Corporation
+ *
+ * Based on rcar_du_crtc.h
+ */
+
+#ifndef __RZG2L_DU_CRTC_H__
+#define __RZG2L_DU_CRTC_H__
+
+#include <linux/mutex.h>
+#include <linux/spinlock.h>
+#include <linux/wait.h>
+
+#include <drm/drm_crtc.h>
+#include <drm/drm_writeback.h>
+
+#include <media/vsp1.h>
+
+struct reset_control;
+struct rzg2l_du_vsp;
+struct rzg2l_du_format_info;
+
+/**
+ * struct rzg2l_du_crtc - the CRTC, representing a DU superposition processor
+ * @crtc: base DRM CRTC
+ * @dev: the DU device
+ * @mmio_offset: offset of the CRTC registers in the DU MMIO block
+ * @index: CRTC hardware index
+ * @initialized: whether the CRTC has been initialized and clocks enabled
+ * @vblank_enable: whether vblank events are enabled on this CRTC
+ * @event: event to post when the pending page flip completes
+ * @flip_wait: wait queue used to signal page flip completion
+ * @vblank_lock: protects vblank_wait and vblank_count
+ * @vblank_wait: wait queue used to signal vertical blanking
+ * @vblank_count: number of vertical blanking interrupts to wait for
+ * @vsp: VSP feeding video to this CRTC
+ * @vsp_pipe: index of the VSP pipeline feeding video to this CRTC
+ * @rstc: reset controller
+ * @rzg2l_clocks: the bus, main and video clock
+ */
+struct rzg2l_du_crtc {
+ struct drm_crtc crtc;
+
+ struct rzg2l_du_device *dev;
+ unsigned int mmio_offset;
+ unsigned int index;
+ bool initialized;
+
+ bool vblank_enable;
+ struct drm_pending_vblank_event *event;
+ wait_queue_head_t flip_wait;
+
+ spinlock_t vblank_lock;
+ wait_queue_head_t vblank_wait;
+ unsigned int vblank_count;
+
+ struct rzg2l_du_vsp *vsp;
+ unsigned int vsp_pipe;
+
+ const char *const *sources;
+ unsigned int sources_count;
+
+ struct reset_control *rstc;
+ struct {
+ struct clk *aclk;
+ struct clk *pclk;
+ struct clk *dclk;
+ } rzg2l_clocks;
+};
+
+#define to_rzg2l_crtc(c) container_of(c, struct rzg2l_du_crtc, crtc)
+
+/**
+ * struct rzg2l_du_crtc_state - Driver-specific CRTC state
+ * @state: base DRM CRTC state
+ * @crc: CRC computation configuration
+ * @outputs: bitmask of the outputs (enum rzg2l_du_output) driven by this CRTC
+ */
+struct rzg2l_du_crtc_state {
+ struct drm_crtc_state state;
+
+ struct vsp1_du_crc_config crc;
+ unsigned int outputs;
+};
+
+#define to_rzg2l_crtc_state(s) container_of(s, struct rzg2l_du_crtc_state, state)
+
+int rzg2l_du_crtc_create(struct rzg2l_du_device *rcdu);
+
+void rzg2l_du_crtc_finish_page_flip(struct rzg2l_du_crtc *rcrtc);
+
+int __rzg2l_du_crtc_plane_atomic_check(struct drm_plane *plane,
+ struct drm_plane_state *state,
+ const struct rzg2l_du_format_info **format);
+
+#endif /* __RZG2L_DU_CRTC_H__ */
diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c
new file mode 100644
index 000000000000..0fea1fea837c
--- /dev/null
+++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c
@@ -0,0 +1,188 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * RZ/G2L Display Unit DRM driver
+ *
+ * Copyright (C) 2023 Renesas Electronics Corporation
+ *
+ * Based on rcar_du_drv.c
+ */
+
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/slab.h>
+#include <linux/wait.h>
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_drv.h>
+#include <drm/drm_fbdev_generic.h>
+#include <drm/drm_gem_dma_helper.h>
+#include <drm/drm_managed.h>
+#include <drm/drm_probe_helper.h>
+
+#include "rzg2l_du_drv.h"
+#include "rzg2l_du_kms.h"
+
+/* -----------------------------------------------------------------------------
+ * Device Information
+ */
+
+static const struct rzg2l_du_device_info rzg2l_du_r9a07g044_info = {
+ .channels_mask = BIT(0),
+ .routes = {
+ [RZG2L_DU_OUTPUT_DSI0] = {
+ .possible_crtcs = BIT(0),
+ .port = 0,
+ },
+ [RZG2L_DU_OUTPUT_DPAD0] = {
+ .possible_crtcs = BIT(0),
+ .port = 1,
+ }
+ }
+};
+
+static const struct of_device_id rzg2l_du_of_table[] = {
+ { .compatible = "renesas,r9a07g044-du", .data = &rzg2l_du_r9a07g044_info },
+ { /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, rzg2l_du_of_table);
+
+const char *rzg2l_du_output_name(enum rzg2l_du_output output)
+{
+ static const char * const names[] = {
+ [RZG2L_DU_OUTPUT_DSI0] = "DSI0",
+ [RZG2L_DU_OUTPUT_DPAD0] = "DPAD0"
+ };
+
+ if (output >= ARRAY_SIZE(names))
+ return "UNKNOWN";
+
+ return names[output];
+}
+
+/* -----------------------------------------------------------------------------
+ * DRM operations
+ */
+
+DEFINE_DRM_GEM_DMA_FOPS(rzg2l_du_fops);
+
+static const struct drm_driver rzg2l_du_driver = {
+ .driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC,
+ .dumb_create = rzg2l_du_dumb_create,
+ .prime_handle_to_fd = drm_gem_prime_handle_to_fd,
+ .prime_fd_to_handle = drm_gem_prime_fd_to_handle,
+ .gem_prime_import_sg_table = rzg2l_du_gem_prime_import_sg_table,
+ .gem_prime_mmap = drm_gem_prime_mmap,
+ .fops = &rzg2l_du_fops,
+ .name = "rzg2l-du",
+ .desc = "Renesas RZ/G2L Display Unit",
+ .date = "20230410",
+ .major = 1,
+ .minor = 0,
+};
+
+/* -----------------------------------------------------------------------------
+ * Platform driver
+ */
+
+static int rzg2l_du_remove(struct platform_device *pdev)
+{
+ struct rzg2l_du_device *rcdu = platform_get_drvdata(pdev);
+ struct drm_device *ddev = &rcdu->ddev;
+
+ drm_dev_unregister(ddev);
+ drm_atomic_helper_shutdown(ddev);
+
+ drm_kms_helper_poll_fini(ddev);
+
+ return 0;
+}
+
+static void rzg2l_du_shutdown(struct platform_device *pdev)
+{
+ struct rzg2l_du_device *rcdu = platform_get_drvdata(pdev);
+
+ drm_atomic_helper_shutdown(&rcdu->ddev);
+}
+
+static int rzg2l_du_probe(struct platform_device *pdev)
+{
+ struct rzg2l_du_device *rcdu;
+ int ret;
+
+ if (drm_firmware_drivers_only())
+ return -ENODEV;
+
+ /* Allocate and initialize the RZ/G2L device structure. */
+ rcdu = devm_drm_dev_alloc(&pdev->dev, &rzg2l_du_driver,
+ struct rzg2l_du_device, ddev);
+ if (IS_ERR(rcdu))
+ return PTR_ERR(rcdu);
+
+ rcdu->dev = &pdev->dev;
+ rcdu->info = of_device_get_match_data(rcdu->dev);
+
+ platform_set_drvdata(pdev, rcdu);
+
+ /* I/O resources */
+ rcdu->mmio = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(rcdu->mmio))
+ return PTR_ERR(rcdu->mmio);
+
+ /*
+ * When sourcing frames from a VSP the DU doesn't perform any memory
+ * access so set the DMA coherent mask to 40 bits to accept all buffers.
+ */
+ ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(40));
+ if (ret)
+ return ret;
+
+ /* DRM/KMS objects */
+ ret = rzg2l_du_modeset_init(rcdu);
+ if (ret < 0) {
+ if (ret != -EPROBE_DEFER)
+ dev_err(&pdev->dev,
+ "failed to initialize DRM/KMS (%d)\n", ret);
+ goto error;
+ }
+
+ /*
+ * Register the DRM device with the core and the connectors with
+ * sysfs.
+ */
+ ret = drm_dev_register(&rcdu->ddev, 0);
+ if (ret)
+ goto error;
+
+ DRM_INFO("Device %s probed\n", dev_name(&pdev->dev));
+
+ drm_fbdev_generic_setup(&rcdu->ddev, 32);
+
+ return 0;
+
+error:
+ drm_kms_helper_poll_fini(&rcdu->ddev);
+ return ret;
+}
+
+static struct platform_driver rzg2l_du_platform_driver = {
+ .probe = rzg2l_du_probe,
+ .remove = rzg2l_du_remove,
+ .shutdown = rzg2l_du_shutdown,
+ .driver = {
+ .name = "rzg2l-du",
+ .of_match_table = rzg2l_du_of_table,
+ },
+};
+
+module_platform_driver(rzg2l_du_platform_driver);
+
+MODULE_AUTHOR("Biju Das <biju.das.jz@bp.renesas.com>");
+MODULE_DESCRIPTION("Renesas RZ/G2L Display Unit DRM Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h
new file mode 100644
index 000000000000..3b84e91aa64a
--- /dev/null
+++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h
@@ -0,0 +1,89 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * RZ/G2L Display Unit DRM driver
+ *
+ * Copyright (C) 2023 Renesas Electronics Corporation
+ *
+ * Based on rcar_du_drv.h
+ */
+
+#ifndef __RZG2L_DU_DRV_H__
+#define __RZG2L_DU_DRV_H__
+
+#include <linux/kernel.h>
+#include <linux/wait.h>
+
+#include <drm/drm_device.h>
+
+#include "rzg2l_du_crtc.h"
+#include "rzg2l_du_vsp.h"
+
+struct clk;
+struct device;
+struct drm_bridge;
+struct drm_property;
+struct rzg2l_du_device;
+
+enum rzg2l_du_output {
+ RZG2L_DU_OUTPUT_DSI0,
+ RZG2L_DU_OUTPUT_DPAD0,
+ RZG2L_DU_OUTPUT_MAX,
+};
+
+/*
+ * struct rzg2l_du_output_routing - Output routing specification
+ * @possible_crtcs: bitmask of possible CRTCs for the output
+ * @port: device tree port number corresponding to this output route
+ *
+ * The DU has 2 possible outputs (DPAD0, DSI0). Output routing data
+ * specify the valid SoC outputs, which CRTCs can drive the output, and the type
+ * of in-SoC encoder for the output.
+ */
+struct rzg2l_du_output_routing {
+ unsigned int possible_crtcs;
+ unsigned int port;
+};
+
+/*
+ * struct rzg2l_du_device_info - DU model-specific information
+ * @channels_mask: bit mask of available DU channels
+ * @routes: array of CRTC to output routes, indexed by output (RZG2L_DU_OUTPUT_*)
+ */
+struct rzg2l_du_device_info {
+ unsigned int channels_mask;
+ struct rzg2l_du_output_routing routes[RZG2L_DU_OUTPUT_MAX];
+};
+
+#define RZG2L_DU_MAX_CRTCS 1
+#define RZG2L_DU_MAX_VSPS 1
+#define RZG2L_DU_MAX_DSI 1
+
+struct rzg2l_du_device {
+ struct device *dev;
+ const struct rzg2l_du_device_info *info;
+
+ void __iomem *mmio;
+
+ struct drm_device ddev;
+
+ struct rzg2l_du_crtc crtcs[RZG2L_DU_MAX_CRTCS];
+ unsigned int num_crtcs;
+
+ struct rzg2l_du_vsp vsps[RZG2L_DU_MAX_VSPS];
+ struct drm_bridge *dsi[RZG2L_DU_MAX_DSI];
+
+ struct {
+ struct drm_property *colorkey;
+ } props;
+
+ unsigned int dpad0_source;
+};
+
+static inline struct rzg2l_du_device *to_rzg2l_du_device(struct drm_device *dev)
+{
+ return container_of(dev, struct rzg2l_du_device, ddev);
+}
+
+const char *rzg2l_du_output_name(enum rzg2l_du_output output);
+
+#endif /* __RZG2L_DU_DRV_H__ */
diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.c b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.c
new file mode 100644
index 000000000000..3dc64f2fa767
--- /dev/null
+++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.c
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * RZ/G2L Display Unit Encoder
+ *
+ * Copyright (C) 2023 Renesas Electronics Corporation
+ *
+ * Based on rcar_du_encoder.c
+ */
+
+#include <linux/export.h>
+#include <linux/of.h>
+
+#include <drm/drm_bridge.h>
+#include <drm/drm_bridge_connector.h>
+#include <drm/drm_panel.h>
+
+#include "rzg2l_du_drv.h"
+#include "rzg2l_du_encoder.h"
+
+/* -----------------------------------------------------------------------------
+ * Encoder
+ */
+
+static unsigned int rzg2l_du_encoder_count_ports(struct device_node *node)
+{
+ struct device_node *ports;
+ struct device_node *port;
+ unsigned int num_ports = 0;
+
+ ports = of_get_child_by_name(node, "ports");
+ if (!ports)
+ ports = of_node_get(node);
+
+ for_each_child_of_node(ports, port) {
+ if (of_node_name_eq(port, "port"))
+ num_ports++;
+ }
+
+ of_node_put(ports);
+
+ return num_ports;
+}
+
+static const struct drm_encoder_funcs rzg2l_du_encoder_funcs = {
+};
+
+int rzg2l_du_encoder_init(struct rzg2l_du_device *rcdu,
+ enum rzg2l_du_output output,
+ struct device_node *enc_node)
+{
+ struct rzg2l_du_encoder *renc;
+ struct drm_connector *connector;
+ struct drm_bridge *bridge;
+ int ret;
+
+ /*
+ * Locate the DRM bridge from the DT node. For the DPAD outputs, if the
+ * DT node has a single port, assume that it describes a panel and
+ * create a panel bridge.
+ */
+ if (output == RZG2L_DU_OUTPUT_DPAD0 &&
+ rzg2l_du_encoder_count_ports(enc_node) == 1) {
+ struct drm_panel *panel = of_drm_find_panel(enc_node);
+
+ if (IS_ERR(panel))
+ return PTR_ERR(panel);
+
+ bridge = devm_drm_panel_bridge_add_typed(rcdu->dev, panel,
+ DRM_MODE_CONNECTOR_DPI);
+ if (IS_ERR(bridge))
+ return PTR_ERR(bridge);
+ } else {
+ bridge = of_drm_find_bridge(enc_node);
+ if (!bridge)
+ return -EPROBE_DEFER;
+
+ if (output == RZG2L_DU_OUTPUT_DSI0)
+ rcdu->dsi[output - RZG2L_DU_OUTPUT_DSI0] = bridge;
+ }
+
+ dev_dbg(rcdu->dev, "initializing encoder %pOF for output %s\n",
+ enc_node, rzg2l_du_output_name(output));
+
+ renc = drmm_encoder_alloc(&rcdu->ddev, struct rzg2l_du_encoder, base,
+ &rzg2l_du_encoder_funcs, DRM_MODE_ENCODER_NONE,
+ NULL);
+ if (IS_ERR(renc))
+ return PTR_ERR(renc);
+
+ renc->output = output;
+
+ /* Attach the bridge to the encoder. */
+ ret = drm_bridge_attach(&renc->base, bridge, NULL,
+ DRM_BRIDGE_ATTACH_NO_CONNECTOR);
+ if (ret) {
+ dev_err(rcdu->dev,
+ "failed to attach bridge %pOF for output %s (%d)\n",
+ bridge->of_node, rzg2l_du_output_name(output), ret);
+ return ret;
+ }
+
+ /* Create the connector for the chain of bridges. */
+ connector = drm_bridge_connector_init(&rcdu->ddev, &renc->base);
+ if (IS_ERR(connector)) {
+ dev_err(rcdu->dev,
+ "failed to created connector for output %s (%ld)\n",
+ rzg2l_du_output_name(output), PTR_ERR(connector));
+ return PTR_ERR(connector);
+ }
+
+ return drm_connector_attach_encoder(connector, &renc->base);
+}
diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.h b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.h
new file mode 100644
index 000000000000..1065c9962507
--- /dev/null
+++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * RZ/G2L Display Unit Encoder
+ *
+ * Copyright (C) 2023 Renesas Electronics Corporation
+ *
+ * Based on rcar_du_encoder.h
+ */
+
+#ifndef __RZG2L_DU_ENCODER_H__
+#define __RZG2L_DU_ENCODER_H__
+
+#include <drm/drm_encoder.h>
+
+struct rzg2l_du_device;
+
+struct rzg2l_du_encoder {
+ struct drm_encoder base;
+ enum rzg2l_du_output output;
+};
+
+#define to_rzg2l_encoder(e) container_of(e, struct rzg2l_du_encoder, base)
+
+int rzg2l_du_encoder_init(struct rzg2l_du_device *rcdu,
+ enum rzg2l_du_output output,
+ struct device_node *enc_node);
+
+#endif /* __RZG2L_DU_ENCODER_H__ */
diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.c b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.c
new file mode 100644
index 000000000000..cf5653219e37
--- /dev/null
+++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.c
@@ -0,0 +1,770 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * RZ/G2L Display Unit Mode Setting
+ *
+ * Copyright (C) 2023 Renesas Electronics Corporation
+ *
+ * Based on rcar_du_kms.c
+ */
+
+#include <drm/drm_atomic.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_device.h>
+#include <drm/drm_framebuffer.h>
+#include <drm/drm_gem_dma_helper.h>
+#include <drm/drm_gem_framebuffer_helper.h>
+#include <drm/drm_managed.h>
+#include <drm/drm_probe_helper.h>
+#include <drm/drm_vblank.h>
+
+#include <linux/device.h>
+#include <linux/dma-buf.h>
+#include <linux/of_graph.h>
+#include <linux/of_platform.h>
+#include <linux/wait.h>
+
+#include "rzg2l_du_crtc.h"
+#include "rzg2l_du_drv.h"
+#include "rzg2l_du_encoder.h"
+#include "rzg2l_du_kms.h"
+#include "rzg2l_du_vsp.h"
+
+/* -----------------------------------------------------------------------------
+ * Format helpers
+ */
+
+static const struct rzg2l_du_format_info rzg2l_du_format_infos[] = {
+ {
+ .fourcc = DRM_FORMAT_RGB565,
+ .v4l2 = V4L2_PIX_FMT_RGB565,
+ .bpp = 16,
+ .planes = 1,
+ .hsub = 1,
+ }, {
+ .fourcc = DRM_FORMAT_ARGB1555,
+ .v4l2 = V4L2_PIX_FMT_ARGB555,
+ .bpp = 16,
+ .planes = 1,
+ .hsub = 1,
+ }, {
+ .fourcc = DRM_FORMAT_XRGB1555,
+ .v4l2 = V4L2_PIX_FMT_XRGB555,
+ .bpp = 16,
+ .planes = 1,
+ }, {
+ .fourcc = DRM_FORMAT_XRGB8888,
+ .v4l2 = V4L2_PIX_FMT_XBGR32,
+ .bpp = 32,
+ .planes = 1,
+ .hsub = 1,
+ }, {
+ .fourcc = DRM_FORMAT_ARGB8888,
+ .v4l2 = V4L2_PIX_FMT_ABGR32,
+ .bpp = 32,
+ .planes = 1,
+ .hsub = 1,
+ }, {
+ .fourcc = DRM_FORMAT_UYVY,
+ .v4l2 = V4L2_PIX_FMT_UYVY,
+ .bpp = 16,
+ .planes = 1,
+ .hsub = 2,
+ }, {
+ .fourcc = DRM_FORMAT_YUYV,
+ .v4l2 = V4L2_PIX_FMT_YUYV,
+ .bpp = 16,
+ .planes = 1,
+ .hsub = 2,
+ }, {
+ .fourcc = DRM_FORMAT_NV12,
+ .v4l2 = V4L2_PIX_FMT_NV12M,
+ .bpp = 12,
+ .planes = 2,
+ .hsub = 2,
+ }, {
+ .fourcc = DRM_FORMAT_NV21,
+ .v4l2 = V4L2_PIX_FMT_NV21M,
+ .bpp = 12,
+ .planes = 2,
+ .hsub = 2,
+ }, {
+ .fourcc = DRM_FORMAT_NV16,
+ .v4l2 = V4L2_PIX_FMT_NV16M,
+ .bpp = 16,
+ .planes = 2,
+ .hsub = 2,
+ },
+ {
+ .fourcc = DRM_FORMAT_RGB332,
+ .v4l2 = V4L2_PIX_FMT_RGB332,
+ .bpp = 8,
+ .planes = 1,
+ .hsub = 1,
+ }, {
+ .fourcc = DRM_FORMAT_ARGB4444,
+ .v4l2 = V4L2_PIX_FMT_ARGB444,
+ .bpp = 16,
+ .planes = 1,
+ .hsub = 1,
+ }, {
+ .fourcc = DRM_FORMAT_XRGB4444,
+ .v4l2 = V4L2_PIX_FMT_XRGB444,
+ .bpp = 16,
+ .planes = 1,
+ .hsub = 1,
+ }, {
+ .fourcc = DRM_FORMAT_RGBA4444,
+ .v4l2 = V4L2_PIX_FMT_RGBA444,
+ .bpp = 16,
+ .planes = 1,
+ .hsub = 1,
+ }, {
+ .fourcc = DRM_FORMAT_RGBX4444,
+ .v4l2 = V4L2_PIX_FMT_RGBX444,
+ .bpp = 16,
+ .planes = 1,
+ .hsub = 1,
+ }, {
+ .fourcc = DRM_FORMAT_ABGR4444,
+ .v4l2 = V4L2_PIX_FMT_ABGR444,
+ .bpp = 16,
+ .planes = 1,
+ .hsub = 1,
+ }, {
+ .fourcc = DRM_FORMAT_XBGR4444,
+ .v4l2 = V4L2_PIX_FMT_XBGR444,
+ .bpp = 16,
+ .planes = 1,
+ .hsub = 1,
+ }, {
+ .fourcc = DRM_FORMAT_BGRA4444,
+ .v4l2 = V4L2_PIX_FMT_BGRA444,
+ .bpp = 16,
+ .planes = 1,
+ .hsub = 1,
+ }, {
+ .fourcc = DRM_FORMAT_BGRX4444,
+ .v4l2 = V4L2_PIX_FMT_BGRX444,
+ .bpp = 16,
+ .planes = 1,
+ .hsub = 1,
+ }, {
+ .fourcc = DRM_FORMAT_RGBA5551,
+ .v4l2 = V4L2_PIX_FMT_RGBA555,
+ .bpp = 16,
+ .planes = 1,
+ .hsub = 1,
+ }, {
+ .fourcc = DRM_FORMAT_RGBX5551,
+ .v4l2 = V4L2_PIX_FMT_RGBX555,
+ .bpp = 16,
+ .planes = 1,
+ .hsub = 1,
+ }, {
+ .fourcc = DRM_FORMAT_ABGR1555,
+ .v4l2 = V4L2_PIX_FMT_ABGR555,
+ .bpp = 16,
+ .planes = 1,
+ .hsub = 1,
+ }, {
+ .fourcc = DRM_FORMAT_XBGR1555,
+ .v4l2 = V4L2_PIX_FMT_XBGR555,
+ .bpp = 16,
+ .planes = 1,
+ .hsub = 1,
+ }, {
+ .fourcc = DRM_FORMAT_BGRA5551,
+ .v4l2 = V4L2_PIX_FMT_BGRA555,
+ .bpp = 16,
+ .planes = 1,
+ .hsub = 1,
+ }, {
+ .fourcc = DRM_FORMAT_BGRX5551,
+ .v4l2 = V4L2_PIX_FMT_BGRX555,
+ .bpp = 16,
+ .planes = 1,
+ .hsub = 1,
+ }, {
+ .fourcc = DRM_FORMAT_BGR888,
+ .v4l2 = V4L2_PIX_FMT_RGB24,
+ .bpp = 24,
+ .planes = 1,
+ .hsub = 1,
+ }, {
+ .fourcc = DRM_FORMAT_RGB888,
+ .v4l2 = V4L2_PIX_FMT_BGR24,
+ .bpp = 24,
+ .planes = 1,
+ .hsub = 1,
+ }, {
+ .fourcc = DRM_FORMAT_RGBA8888,
+ .v4l2 = V4L2_PIX_FMT_BGRA32,
+ .bpp = 32,
+ .planes = 1,
+ .hsub = 1,
+ }, {
+ .fourcc = DRM_FORMAT_RGBX8888,
+ .v4l2 = V4L2_PIX_FMT_BGRX32,
+ .bpp = 32,
+ .planes = 1,
+ .hsub = 1,
+ }, {
+ .fourcc = DRM_FORMAT_ABGR8888,
+ .v4l2 = V4L2_PIX_FMT_RGBA32,
+ .bpp = 32,
+ .planes = 1,
+ .hsub = 1,
+ }, {
+ .fourcc = DRM_FORMAT_XBGR8888,
+ .v4l2 = V4L2_PIX_FMT_RGBX32,
+ .bpp = 32,
+ .planes = 1,
+ .hsub = 1,
+ }, {
+ .fourcc = DRM_FORMAT_BGRA8888,
+ .v4l2 = V4L2_PIX_FMT_ARGB32,
+ .bpp = 32,
+ .planes = 1,
+ .hsub = 1,
+ }, {
+ .fourcc = DRM_FORMAT_BGRX8888,
+ .v4l2 = V4L2_PIX_FMT_XRGB32,
+ .bpp = 32,
+ .planes = 1,
+ .hsub = 1,
+ }, {
+ .fourcc = DRM_FORMAT_RGBX1010102,
+ .v4l2 = V4L2_PIX_FMT_RGBX1010102,
+ .bpp = 32,
+ .planes = 1,
+ .hsub = 1,
+ }, {
+ .fourcc = DRM_FORMAT_RGBA1010102,
+ .v4l2 = V4L2_PIX_FMT_RGBA1010102,
+ .bpp = 32,
+ .planes = 1,
+ .hsub = 1,
+ }, {
+ .fourcc = DRM_FORMAT_ARGB2101010,
+ .v4l2 = V4L2_PIX_FMT_ARGB2101010,
+ .bpp = 32,
+ .planes = 1,
+ .hsub = 1,
+ }, {
+ .fourcc = DRM_FORMAT_YVYU,
+ .v4l2 = V4L2_PIX_FMT_YVYU,
+ .bpp = 16,
+ .planes = 1,
+ .hsub = 2,
+ }, {
+ .fourcc = DRM_FORMAT_NV61,
+ .v4l2 = V4L2_PIX_FMT_NV61M,
+ .bpp = 16,
+ .planes = 2,
+ .hsub = 2,
+ }, {
+ .fourcc = DRM_FORMAT_YUV420,
+ .v4l2 = V4L2_PIX_FMT_YUV420M,
+ .bpp = 12,
+ .planes = 3,
+ .hsub = 2,
+ }, {
+ .fourcc = DRM_FORMAT_YVU420,
+ .v4l2 = V4L2_PIX_FMT_YVU420M,
+ .bpp = 12,
+ .planes = 3,
+ .hsub = 2,
+ }, {
+ .fourcc = DRM_FORMAT_YUV422,
+ .v4l2 = V4L2_PIX_FMT_YUV422M,
+ .bpp = 16,
+ .planes = 3,
+ .hsub = 2,
+ }, {
+ .fourcc = DRM_FORMAT_YVU422,
+ .v4l2 = V4L2_PIX_FMT_YVU422M,
+ .bpp = 16,
+ .planes = 3,
+ .hsub = 2,
+ }, {
+ .fourcc = DRM_FORMAT_YUV444,
+ .v4l2 = V4L2_PIX_FMT_YUV444M,
+ .bpp = 24,
+ .planes = 3,
+ .hsub = 1,
+ }, {
+ .fourcc = DRM_FORMAT_YVU444,
+ .v4l2 = V4L2_PIX_FMT_YVU444M,
+ .bpp = 24,
+ .planes = 3,
+ .hsub = 1,
+ }, {
+ .fourcc = DRM_FORMAT_Y210,
+ .v4l2 = V4L2_PIX_FMT_Y210,
+ .bpp = 32,
+ .planes = 1,
+ .hsub = 2,
+ }, {
+ .fourcc = DRM_FORMAT_Y212,
+ .v4l2 = V4L2_PIX_FMT_Y212,
+ .bpp = 32,
+ .planes = 1,
+ .hsub = 2,
+ },
+};
+
+const struct rzg2l_du_format_info *rzg2l_du_format_info(u32 fourcc)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(rzg2l_du_format_infos); ++i) {
+ if (rzg2l_du_format_infos[i].fourcc == fourcc)
+ return &rzg2l_du_format_infos[i];
+ }
+
+ return NULL;
+}
+
+/* -----------------------------------------------------------------------------
+ * Frame buffer
+ */
+
+static const struct drm_gem_object_funcs rzg2l_du_gem_funcs = {
+ .free = drm_gem_dma_object_free,
+ .print_info = drm_gem_dma_object_print_info,
+ .get_sg_table = drm_gem_dma_object_get_sg_table,
+ .vmap = drm_gem_dma_object_vmap,
+ .mmap = drm_gem_dma_object_mmap,
+ .vm_ops = &drm_gem_dma_vm_ops,
+};
+
+struct drm_gem_object *
+rzg2l_du_gem_prime_import_sg_table(struct drm_device *dev,
+ struct dma_buf_attachment *attach,
+ struct sg_table *sgt)
+{
+ struct drm_gem_dma_object *dma_obj;
+ struct drm_gem_object *gem_obj;
+ int ret;
+
+ /* Create a DMA GEM buffer. */
+ dma_obj = kzalloc(sizeof(*dma_obj), GFP_KERNEL);
+ if (!dma_obj)
+ return ERR_PTR(-ENOMEM);
+
+ gem_obj = &dma_obj->base;
+ gem_obj->funcs = &rzg2l_du_gem_funcs;
+
+ drm_gem_private_object_init(dev, gem_obj, attach->dmabuf->size);
+ dma_obj->map_noncoherent = false;
+
+ ret = drm_gem_create_mmap_offset(gem_obj);
+ if (ret) {
+ drm_gem_object_release(gem_obj);
+ kfree(dma_obj);
+ return ERR_PTR(ret);
+ }
+
+ dma_obj->dma_addr = 0;
+ dma_obj->sgt = sgt;
+
+ return gem_obj;
+}
+
+int rzg2l_du_dumb_create(struct drm_file *file, struct drm_device *dev,
+ struct drm_mode_create_dumb *args)
+{
+ unsigned int min_pitch = DIV_ROUND_UP(args->width * args->bpp, 8);
+ unsigned int align = 16 * args->bpp / 8;
+
+ args->pitch = roundup(min_pitch, align);
+
+ return drm_gem_dma_dumb_create_internal(file, dev, args);
+}
+
+static struct drm_framebuffer *
+rzg2l_du_fb_create(struct drm_device *dev, struct drm_file *file_priv,
+ const struct drm_mode_fb_cmd2 *mode_cmd)
+{
+ const struct rzg2l_du_format_info *format;
+ unsigned int chroma_pitch;
+ unsigned int max_pitch;
+ unsigned int align;
+ unsigned int i;
+
+ format = rzg2l_du_format_info(mode_cmd->pixel_format);
+ if (!format) {
+ dev_dbg(dev->dev, "unsupported pixel format %p4cc\n",
+ &mode_cmd->pixel_format);
+ return ERR_PTR(-EINVAL);
+ }
+
+ /*
+ * On Gen3 the memory interface is handled by the VSP that limits the
+ * pitch to 65535 bytes and has no alignment constraint.
+ */
+ max_pitch = 65535;
+ align = 1;
+
+ if (mode_cmd->pitches[0] & (align - 1) ||
+ mode_cmd->pitches[0] > max_pitch) {
+ dev_dbg(dev->dev, "invalid pitch value %u\n",
+ mode_cmd->pitches[0]);
+ return ERR_PTR(-EINVAL);
+ }
+
+ /*
+ * Calculate the chroma plane(s) pitch using the horizontal subsampling
+ * factor. For semi-planar formats, the U and V planes are combined, the
+ * pitch must thus be doubled.
+ */
+ chroma_pitch = mode_cmd->pitches[0] / format->hsub;
+ if (format->planes == 2)
+ chroma_pitch *= 2;
+
+ for (i = 1; i < format->planes; ++i) {
+ if (mode_cmd->pitches[i] != chroma_pitch) {
+ dev_dbg(dev->dev,
+ "luma and chroma pitches are not compatible\n");
+ return ERR_PTR(-EINVAL);
+ }
+ }
+
+ return drm_gem_fb_create(dev, file_priv, mode_cmd);
+}
+
+/* -----------------------------------------------------------------------------
+ * Atomic Check and Update
+ */
+
+static void rzg2l_du_atomic_commit_tail(struct drm_atomic_state *old_state)
+{
+ struct drm_device *dev = old_state->dev;
+ struct rzg2l_du_device *rcdu = to_rzg2l_du_device(dev);
+ struct drm_crtc_state *crtc_state;
+ struct drm_crtc *crtc;
+ unsigned int i;
+
+ /*
+ * Store RGB routing to DPAD0, the hardware will be configured
+ * when starting the CRTCs.
+ */
+ for_each_new_crtc_in_state(old_state, crtc, crtc_state, i) {
+ struct rzg2l_du_crtc_state *rcrtc_state =
+ to_rzg2l_crtc_state(crtc_state);
+ struct rzg2l_du_crtc *rcrtc = to_rzg2l_crtc(crtc);
+
+ if (rcrtc_state->outputs & BIT(RZG2L_DU_OUTPUT_DPAD0))
+ rcdu->dpad0_source = rcrtc->index;
+ }
+
+ /* Apply the atomic update. */
+ drm_atomic_helper_commit_modeset_disables(dev, old_state);
+ drm_atomic_helper_commit_planes(dev, old_state,
+ DRM_PLANE_COMMIT_ACTIVE_ONLY);
+ drm_atomic_helper_commit_modeset_enables(dev, old_state);
+
+ drm_atomic_helper_commit_hw_done(old_state);
+ drm_atomic_helper_wait_for_flip_done(dev, old_state);
+
+ drm_atomic_helper_cleanup_planes(dev, old_state);
+}
+
+/* -----------------------------------------------------------------------------
+ * Initialization
+ */
+
+static const struct drm_mode_config_helper_funcs rzg2l_du_mode_config_helper = {
+ .atomic_commit_tail = rzg2l_du_atomic_commit_tail,
+};
+
+static const struct drm_mode_config_funcs rzg2l_du_mode_config_funcs = {
+ .fb_create = rzg2l_du_fb_create,
+ .atomic_check = drm_atomic_helper_check,
+ .atomic_commit = drm_atomic_helper_commit,
+};
+
+static int rzg2l_du_encoders_init_one(struct rzg2l_du_device *rcdu,
+ enum rzg2l_du_output output,
+ struct of_endpoint *ep)
+{
+ struct device_node *entity;
+ int ret;
+
+ /* Locate the connected entity and initialize the encoder. */
+ entity = of_graph_get_remote_port_parent(ep->local_node);
+ if (!entity) {
+ dev_dbg(rcdu->dev, "unconnected endpoint %pOF, skipping\n",
+ ep->local_node);
+ return -ENODEV;
+ }
+
+ if (!of_device_is_available(entity)) {
+ dev_dbg(rcdu->dev,
+ "connected entity %pOF is disabled, skipping\n",
+ entity);
+ of_node_put(entity);
+ return -ENODEV;
+ }
+
+ ret = rzg2l_du_encoder_init(rcdu, output, entity);
+ if (ret && ret != -EPROBE_DEFER && ret != -ENOLINK)
+ dev_warn(rcdu->dev,
+ "failed to initialize encoder %pOF on output %s (%d), skipping\n",
+ entity, rzg2l_du_output_name(output), ret);
+
+ of_node_put(entity);
+
+ return ret;
+}
+
+static int rzg2l_du_encoders_init(struct rzg2l_du_device *rcdu)
+{
+ struct device_node *np = rcdu->dev->of_node;
+ struct device_node *ep_node;
+ unsigned int num_encoders = 0;
+
+ /*
+ * Iterate over the endpoints and create one encoder for each output
+ * pipeline.
+ */
+ for_each_endpoint_of_node(np, ep_node) {
+ enum rzg2l_du_output output;
+ struct of_endpoint ep;
+ unsigned int i;
+ int ret;
+
+ ret = of_graph_parse_endpoint(ep_node, &ep);
+ if (ret < 0) {
+ of_node_put(ep_node);
+ return ret;
+ }
+
+ /* Find the output route corresponding to the port number. */
+ for (i = 0; i < RZG2L_DU_OUTPUT_MAX; ++i) {
+ if (rcdu->info->routes[i].possible_crtcs &&
+ rcdu->info->routes[i].port == ep.port) {
+ output = i;
+ break;
+ }
+ }
+
+ if (i == RZG2L_DU_OUTPUT_MAX) {
+ dev_warn(rcdu->dev,
+ "port %u references unexisting output, skipping\n",
+ ep.port);
+ continue;
+ }
+
+ /* Process the output pipeline. */
+ ret = rzg2l_du_encoders_init_one(rcdu, output, &ep);
+ if (ret < 0) {
+ if (ret == -EPROBE_DEFER) {
+ of_node_put(ep_node);
+ return ret;
+ }
+
+ continue;
+ }
+
+ num_encoders++;
+ }
+
+ return num_encoders;
+}
+
+static int rzg2l_du_properties_init(struct rzg2l_du_device *rcdu)
+{
+ /*
+ * The color key is expressed as an RGB888 triplet stored in a 32-bit
+ * integer in XRGB8888 format. Bit 24 is used as a flag to disable (0)
+ * or enable source color keying (1).
+ */
+ rcdu->props.colorkey =
+ drm_property_create_range(&rcdu->ddev, 0, "colorkey",
+ 0, 0x01ffffff);
+ if (!rcdu->props.colorkey)
+ return -ENOMEM;
+
+ return 0;
+}
+
+static int rzg2l_du_vsps_init(struct rzg2l_du_device *rcdu)
+{
+ const struct device_node *np = rcdu->dev->of_node;
+ const char *vsps_prop_name = "renesas,vsps";
+ struct of_phandle_args args;
+ struct {
+ struct device_node *np;
+ unsigned int crtcs_mask;
+ } vsps[RZG2L_DU_MAX_VSPS] = { { NULL, }, };
+ unsigned int vsps_count = 0;
+ unsigned int cells;
+ unsigned int i;
+ int ret;
+
+ /*
+ * First parse the DT vsps property to populate the list of VSPs. Each
+ * entry contains a pointer to the VSP DT node and a bitmask of the
+ * connected DU CRTCs.
+ */
+ ret = of_property_count_u32_elems(np, vsps_prop_name);
+ if (ret < 0) {
+ /* Backward compatibility with old DTBs. */
+ vsps_prop_name = "vsps";
+ ret = of_property_count_u32_elems(np, vsps_prop_name);
+ }
+ cells = ret / rcdu->num_crtcs - 1;
+ if (cells > 1)
+ return -EINVAL;
+
+ for (i = 0; i < rcdu->num_crtcs; ++i) {
+ unsigned int j;
+
+ ret = of_parse_phandle_with_fixed_args(np, vsps_prop_name,
+ cells, i, &args);
+ if (ret < 0)
+ goto error;
+
+ /*
+ * Add the VSP to the list or update the corresponding existing
+ * entry if the VSP has already been added.
+ */
+ for (j = 0; j < vsps_count; ++j) {
+ if (vsps[j].np == args.np)
+ break;
+ }
+
+ if (j < vsps_count)
+ of_node_put(args.np);
+ else
+ vsps[vsps_count++].np = args.np;
+
+ vsps[j].crtcs_mask |= BIT(i);
+
+ /*
+ * Store the VSP pointer and pipe index in the CRTC. If the
+ * second cell of the 'renesas,vsps' specifier isn't present,
+ * default to 0 to remain compatible with older DT bindings.
+ */
+ rcdu->crtcs[i].vsp = &rcdu->vsps[j];
+ rcdu->crtcs[i].vsp_pipe = cells >= 1 ? args.args[0] : 0;
+ }
+
+ /*
+ * Then initialize all the VSPs from the node pointers and CRTCs bitmask
+ * computed previously.
+ */
+ for (i = 0; i < vsps_count; ++i) {
+ struct rzg2l_du_vsp *vsp = &rcdu->vsps[i];
+
+ vsp->index = i;
+ vsp->dev = rcdu;
+
+ ret = rzg2l_du_vsp_init(vsp, vsps[i].np, vsps[i].crtcs_mask);
+ if (ret < 0)
+ goto error;
+ }
+
+ return 0;
+
+error:
+ for (i = 0; i < ARRAY_SIZE(vsps); ++i)
+ of_node_put(vsps[i].np);
+
+ return ret;
+}
+
+int rzg2l_du_modeset_init(struct rzg2l_du_device *rcdu)
+{
+ struct drm_device *dev = &rcdu->ddev;
+ struct drm_encoder *encoder;
+ unsigned int dpad0_sources;
+ unsigned int num_encoders;
+ int ret;
+
+ ret = drmm_mode_config_init(dev);
+ if (ret)
+ return ret;
+
+ dev->mode_config.min_width = 0;
+ dev->mode_config.min_height = 0;
+ dev->mode_config.normalize_zpos = true;
+ dev->mode_config.funcs = &rzg2l_du_mode_config_funcs;
+ dev->mode_config.helper_private = &rzg2l_du_mode_config_helper;
+
+ /*
+ * The RZ DU uses the VSP1 for memory access, and is limited
+ * to frame sizes of 1920x1080.
+ */
+ dev->mode_config.max_width = 1920;
+ dev->mode_config.max_height = 1080;
+
+ rcdu->num_crtcs = hweight8(rcdu->info->channels_mask);
+
+ ret = rzg2l_du_properties_init(rcdu);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * Initialize vertical blanking interrupts handling. Start with vblank
+ * disabled for all CRTCs.
+ */
+ ret = drm_vblank_init(dev, rcdu->num_crtcs);
+ if (ret < 0)
+ return ret;
+
+ /* Initialize the compositors. */
+ ret = rzg2l_du_vsps_init(rcdu);
+ if (ret < 0)
+ return ret;
+
+ /* Create the CRTCs. */
+ ret = rzg2l_du_crtc_create(rcdu);
+ if (ret < 0)
+ return ret;
+
+ /* Initialize the encoders. */
+ ret = rzg2l_du_encoders_init(rcdu);
+ if (ret < 0)
+ return ret;
+
+ if (ret == 0) {
+ dev_err(rcdu->dev, "error: no encoder could be initialized\n");
+ return -EINVAL;
+ }
+
+ num_encoders = ret;
+
+ /*
+ * Set the possible CRTCs and possible clones. There's always at least
+ * one way for all encoders to clone each other, set all bits in the
+ * possible clones field.
+ */
+ list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+ struct rzg2l_du_encoder *renc = to_rzg2l_encoder(encoder);
+ const struct rzg2l_du_output_routing *route =
+ &rcdu->info->routes[renc->output];
+
+ encoder->possible_crtcs = route->possible_crtcs;
+ encoder->possible_clones = (1 << num_encoders) - 1;
+ }
+
+ /*
+ * Initialize the default DPAD0 source to the index of the first DU
+ * channel that can be connected to DPAD0. The exact value doesn't
+ * matter as it should be overwritten by mode setting for the RGB
+ * output, but it is nonetheless required to ensure a valid initial
+ * hardware configuration on Gen3 where DU0 can't always be connected to
+ * DPAD0.
+ */
+ dpad0_sources = rcdu->info->routes[RZG2L_DU_OUTPUT_DPAD0].possible_crtcs;
+ rcdu->dpad0_source = ffs(dpad0_sources) - 1;
+
+ drm_mode_config_reset(dev);
+
+ drm_kms_helper_poll_init(dev);
+
+ return 0;
+}
diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.h b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.h
new file mode 100644
index 000000000000..876e97cfbf45
--- /dev/null
+++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.h
@@ -0,0 +1,43 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * RZ/G2L Display Unit Mode Setting
+ *
+ * Copyright (C) 2023 Renesas Electronics Corporation
+ *
+ * Based on rcar_du_kms.h
+ */
+
+#ifndef __RZG2L_DU_KMS_H__
+#define __RZG2L_DU_KMS_H__
+
+#include <linux/types.h>
+
+struct dma_buf_attachment;
+struct drm_file;
+struct drm_device;
+struct drm_gem_object;
+struct drm_mode_create_dumb;
+struct rzg2l_du_device;
+struct sg_table;
+
+struct rzg2l_du_format_info {
+ u32 fourcc;
+ u32 v4l2;
+ unsigned int bpp;
+ unsigned int planes;
+ unsigned int hsub;
+};
+
+const struct rzg2l_du_format_info *rzg2l_du_format_info(u32 fourcc);
+
+int rzg2l_du_modeset_init(struct rzg2l_du_device *rcdu);
+
+int rzg2l_du_dumb_create(struct drm_file *file, struct drm_device *dev,
+ struct drm_mode_create_dumb *args);
+
+struct drm_gem_object *
+rzg2l_du_gem_prime_import_sg_table(struct drm_device *dev,
+ struct dma_buf_attachment *attach,
+ struct sg_table *sgt);
+
+#endif /* __RZG2L_DU_KMS_H__ */
diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_regs.h b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_regs.h
new file mode 100644
index 000000000000..a0ca05abb5a8
--- /dev/null
+++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_regs.h
@@ -0,0 +1,67 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * RZ/G2L Display Unit Registers Definitions
+ *
+ * Copyright (C) 2023 Renesas Electronics Corporation
+ *
+ */
+
+#ifndef __RZG2L_DU_REGS_H__
+#define __RZG2L_DU_REGS_H__
+
+/* -----------------------------------------------------------------------------
+ * Display Control Registers
+ */
+
+#define DU_MCR0 0x00
+#define DU_MCR0_DPI_OE BIT(0)
+#define DU_MCR0_DI_EN BIT(8)
+#define DU_MCR0_PB_CLR BIT(16)
+
+#define DU_MSR0 0x04
+#define DU_MSR0_ST_DI_BSY BIT(8)
+#define DU_MSR0_ST_PB_WFULL BIT(16)
+#define DU_MSR0_ST_PB_WINIT BIT(18)
+#define DU_MSR0_ST_PB_REMPTY BIT(20)
+#define DU_MSR0_ST_PB_RUF BIT(21)
+#define DU_MSR0_ST_PB_RINIT BIT(22)
+
+#define DU_MSR1 0x08
+
+#define DU_IMR0 0x0c
+#define DU_MSR0_IM_PB_RUF BIT(0)
+
+#define DU_DITR0 0x10
+#define DU_DITR0_DPI_CLKMD BIT(0)
+#define DU_DITR0_DEMD_LOW 0x0
+#define DU_DITR0_DEMD_HIGH (BIT(8) | BIT(9))
+#define DU_DITR0_VSPOL BIT(16)
+#define DU_DITR0_HSPOL BIT(17)
+
+#define DU_DITR1 0x14
+#define DU_DITR1_VSA(x) ((x) << 0)
+#define DU_DITR1_VACTIVE(x) ((x) << 16)
+
+#define DU_DITR2 0x18
+#define DU_DITR2_VBP(x) ((x) << 0)
+#define DU_DITR2_VFP(x) ((x) << 16)
+
+#define DU_DITR3 0x1c
+#define DU_DITR3_HSA(x) ((x) << 0)
+#define DU_DITR3_HACTIVE(x) ((x) << 16)
+
+#define DU_DITR4 0x20
+#define DU_DITR4_HBP(x) ((x) << 0)
+#define DU_DITR4_HFP(x) ((x) << 16)
+
+#define DU_DITR5 0x24
+#define DU_DITR5_VSFT(x) ((x) << 0)
+#define DU_DITR5_HSFT(x) ((x) << 16)
+
+#define DU_MCR1 0x40
+#define DU_MCR1_PB_AUTOCLR BIT(16)
+
+#define DU_PBCR0 0x4c
+#define DU_PBCR0_PB_DEP(x) ((x) << 0)
+
+#endif /* __RZG2L_DU_REGS_H__ */
diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.c b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.c
new file mode 100644
index 000000000000..3ba21754428e
--- /dev/null
+++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.c
@@ -0,0 +1,430 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * RZ/G2L Display Unit VSP-Based Compositor
+ *
+ * Copyright (C) 2023 Renesas Electronics Corporation
+ *
+ * Based on rcar_du_vsp.c
+ */
+
+#include <drm/drm_atomic.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_blend.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_fb_dma_helper.h>
+#include <drm/drm_fourcc.h>
+#include <drm/drm_framebuffer.h>
+#include <drm/drm_gem_atomic_helper.h>
+#include <drm/drm_gem_dma_helper.h>
+#include <drm/drm_managed.h>
+#include <drm/drm_vblank.h>
+
+#include <linux/bitops.h>
+#include <linux/dma-mapping.h>
+#include <linux/of_platform.h>
+#include <linux/scatterlist.h>
+
+#include <media/vsp1.h>
+
+#include "rzg2l_du_drv.h"
+#include "rzg2l_du_kms.h"
+#include "rzg2l_du_vsp.h"
+
+static void rzg2l_du_vsp_complete(void *private, unsigned int status, u32 crc)
+{
+ struct rzg2l_du_crtc *crtc = private;
+
+ if (crtc->vblank_enable)
+ drm_crtc_handle_vblank(&crtc->crtc);
+
+ if (status & VSP1_DU_STATUS_COMPLETE)
+ rzg2l_du_crtc_finish_page_flip(crtc);
+
+ drm_crtc_add_crc_entry(&crtc->crtc, false, 0, &crc);
+}
+
+void rzg2l_du_vsp_enable(struct rzg2l_du_crtc *crtc)
+{
+ const struct drm_display_mode *mode = &crtc->crtc.state->adjusted_mode;
+ struct vsp1_du_lif_config cfg = {
+ .width = mode->hdisplay,
+ .height = mode->vdisplay,
+ .interlaced = mode->flags & DRM_MODE_FLAG_INTERLACE,
+ .callback = rzg2l_du_vsp_complete,
+ .callback_data = crtc,
+ };
+
+ vsp1_du_setup_lif(crtc->vsp->vsp, crtc->vsp_pipe, &cfg);
+}
+
+void rzg2l_du_vsp_disable(struct rzg2l_du_crtc *crtc)
+{
+ vsp1_du_setup_lif(crtc->vsp->vsp, crtc->vsp_pipe, NULL);
+}
+
+void rzg2l_du_vsp_atomic_begin(struct rzg2l_du_crtc *crtc)
+{
+ vsp1_du_atomic_begin(crtc->vsp->vsp, crtc->vsp_pipe);
+}
+
+void rzg2l_du_vsp_atomic_flush(struct rzg2l_du_crtc *crtc)
+{
+ struct vsp1_du_atomic_pipe_config cfg = { { 0, } };
+ struct rzg2l_du_crtc_state *state;
+
+ state = to_rzg2l_crtc_state(crtc->crtc.state);
+ cfg.crc = state->crc;
+
+ vsp1_du_atomic_flush(crtc->vsp->vsp, crtc->vsp_pipe, &cfg);
+}
+
+static const u32 rzg2l_du_vsp_formats[] = {
+ DRM_FORMAT_RGB332,
+ DRM_FORMAT_ARGB4444,
+ DRM_FORMAT_XRGB4444,
+ DRM_FORMAT_ARGB1555,
+ DRM_FORMAT_XRGB1555,
+ DRM_FORMAT_RGB565,
+ DRM_FORMAT_BGR888,
+ DRM_FORMAT_RGB888,
+ DRM_FORMAT_BGRA8888,
+ DRM_FORMAT_BGRX8888,
+ DRM_FORMAT_ARGB8888,
+ DRM_FORMAT_XRGB8888,
+ DRM_FORMAT_UYVY,
+ DRM_FORMAT_YUYV,
+ DRM_FORMAT_YVYU,
+ DRM_FORMAT_NV12,
+ DRM_FORMAT_NV21,
+ DRM_FORMAT_NV16,
+ DRM_FORMAT_NV61,
+ DRM_FORMAT_YUV420,
+ DRM_FORMAT_YVU420,
+ DRM_FORMAT_YUV422,
+ DRM_FORMAT_YVU422,
+ DRM_FORMAT_YUV444,
+ DRM_FORMAT_YVU444,
+};
+
+static void rzg2l_du_vsp_plane_setup(struct rzg2l_du_vsp_plane *plane)
+{
+ struct rzg2l_du_vsp_plane_state *state =
+ to_rzg2l_vsp_plane_state(plane->plane.state);
+ struct rzg2l_du_crtc *crtc = to_rzg2l_crtc(state->state.crtc);
+ struct drm_framebuffer *fb = plane->plane.state->fb;
+ const struct rzg2l_du_format_info *format;
+ struct vsp1_du_atomic_config cfg = {
+ .pixelformat = 0,
+ .pitch = fb->pitches[0],
+ .alpha = state->state.alpha >> 8,
+ .zpos = state->state.zpos,
+ };
+ u32 fourcc = state->format->fourcc;
+ unsigned int i;
+
+ cfg.src.left = state->state.src.x1 >> 16;
+ cfg.src.top = state->state.src.y1 >> 16;
+ cfg.src.width = drm_rect_width(&state->state.src) >> 16;
+ cfg.src.height = drm_rect_height(&state->state.src) >> 16;
+
+ cfg.dst.left = state->state.dst.x1;
+ cfg.dst.top = state->state.dst.y1;
+ cfg.dst.width = drm_rect_width(&state->state.dst);
+ cfg.dst.height = drm_rect_height(&state->state.dst);
+
+ for (i = 0; i < state->format->planes; ++i)
+ cfg.mem[i] = sg_dma_address(state->sg_tables[i].sgl)
+ + fb->offsets[i];
+
+ if (state->state.pixel_blend_mode == DRM_MODE_BLEND_PIXEL_NONE) {
+ switch (fourcc) {
+ case DRM_FORMAT_ARGB1555:
+ fourcc = DRM_FORMAT_XRGB1555;
+ break;
+
+ case DRM_FORMAT_ARGB4444:
+ fourcc = DRM_FORMAT_XRGB4444;
+ break;
+
+ case DRM_FORMAT_ARGB8888:
+ fourcc = DRM_FORMAT_XRGB8888;
+ break;
+ }
+ }
+
+ format = rzg2l_du_format_info(fourcc);
+ cfg.pixelformat = format->v4l2;
+
+ cfg.premult = state->state.pixel_blend_mode == DRM_MODE_BLEND_PREMULTI;
+
+ vsp1_du_atomic_update(plane->vsp->vsp, crtc->vsp_pipe,
+ plane->index, &cfg);
+}
+
+int rzg2l_du_vsp_map_fb(struct rzg2l_du_vsp *vsp, struct drm_framebuffer *fb,
+ struct sg_table sg_tables[3])
+{
+ struct rzg2l_du_device *rcdu = vsp->dev;
+ unsigned int i, j;
+ int ret;
+
+ for (i = 0; i < fb->format->num_planes; ++i) {
+ struct drm_gem_dma_object *gem = drm_fb_dma_get_gem_obj(fb, i);
+ struct sg_table *sgt = &sg_tables[i];
+
+ if (gem->sgt) {
+ struct scatterlist *src;
+ struct scatterlist *dst;
+
+ /*
+ * If the GEM buffer has a scatter gather table, it has
+ * been imported from a dma-buf and has no physical
+ * address as it might not be physically contiguous.
+ * Copy the original scatter gather table to map it to
+ * the VSP.
+ */
+ ret = sg_alloc_table(sgt, gem->sgt->orig_nents,
+ GFP_KERNEL);
+ if (ret)
+ goto fail;
+
+ src = gem->sgt->sgl;
+ dst = sgt->sgl;
+ for (j = 0; j < gem->sgt->orig_nents; ++j) {
+ sg_set_page(dst, sg_page(src), src->length,
+ src->offset);
+ src = sg_next(src);
+ dst = sg_next(dst);
+ }
+ } else {
+ ret = dma_get_sgtable(rcdu->dev, sgt, gem->vaddr,
+ gem->dma_addr, gem->base.size);
+ if (ret)
+ goto fail;
+ }
+
+ ret = vsp1_du_map_sg(vsp->vsp, sgt);
+ if (ret) {
+ sg_free_table(sgt);
+ goto fail;
+ }
+ }
+
+ return 0;
+
+fail:
+ while (i--) {
+ struct sg_table *sgt = &sg_tables[i];
+
+ vsp1_du_unmap_sg(vsp->vsp, sgt);
+ sg_free_table(sgt);
+ }
+
+ return ret;
+}
+
+static int rzg2l_du_vsp_plane_prepare_fb(struct drm_plane *plane,
+ struct drm_plane_state *state)
+{
+ struct rzg2l_du_vsp_plane_state *rstate = to_rzg2l_vsp_plane_state(state);
+ struct rzg2l_du_vsp *vsp = to_rzg2l_vsp_plane(plane)->vsp;
+ int ret;
+
+ /*
+ * There's no need to prepare (and unprepare) the framebuffer when the
+ * plane is not visible, as it will not be displayed.
+ */
+ if (!state->visible)
+ return 0;
+
+ ret = rzg2l_du_vsp_map_fb(vsp, state->fb, rstate->sg_tables);
+ if (ret < 0)
+ return ret;
+
+ return drm_gem_plane_helper_prepare_fb(plane, state);
+}
+
+void rzg2l_du_vsp_unmap_fb(struct rzg2l_du_vsp *vsp, struct drm_framebuffer *fb,
+ struct sg_table sg_tables[3])
+{
+ unsigned int i;
+
+ for (i = 0; i < fb->format->num_planes; ++i) {
+ struct sg_table *sgt = &sg_tables[i];
+
+ vsp1_du_unmap_sg(vsp->vsp, sgt);
+ sg_free_table(sgt);
+ }
+}
+
+static void rzg2l_du_vsp_plane_cleanup_fb(struct drm_plane *plane,
+ struct drm_plane_state *state)
+{
+ struct rzg2l_du_vsp_plane_state *rstate = to_rzg2l_vsp_plane_state(state);
+ struct rzg2l_du_vsp *vsp = to_rzg2l_vsp_plane(plane)->vsp;
+
+ if (!state->visible)
+ return;
+
+ rzg2l_du_vsp_unmap_fb(vsp, state->fb, rstate->sg_tables);
+}
+
+static int rzg2l_du_vsp_plane_atomic_check(struct drm_plane *plane,
+ struct drm_atomic_state *state)
+{
+ struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state,
+ plane);
+ struct rzg2l_du_vsp_plane_state *rstate = to_rzg2l_vsp_plane_state(new_plane_state);
+
+ return __rzg2l_du_crtc_plane_atomic_check(plane, new_plane_state, &rstate->format);
+}
+
+static void rzg2l_du_vsp_plane_atomic_update(struct drm_plane *plane,
+ struct drm_atomic_state *state)
+{
+ struct drm_plane_state *old_state = drm_atomic_get_old_plane_state(state, plane);
+ struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state, plane);
+ struct rzg2l_du_vsp_plane *rplane = to_rzg2l_vsp_plane(plane);
+ struct rzg2l_du_crtc *crtc = to_rzg2l_crtc(old_state->crtc);
+
+ if (new_state->visible)
+ rzg2l_du_vsp_plane_setup(rplane);
+ else if (old_state->crtc)
+ vsp1_du_atomic_update(rplane->vsp->vsp, crtc->vsp_pipe,
+ rplane->index, NULL);
+}
+
+static const struct drm_plane_helper_funcs rzg2l_du_vsp_plane_helper_funcs = {
+ .prepare_fb = rzg2l_du_vsp_plane_prepare_fb,
+ .cleanup_fb = rzg2l_du_vsp_plane_cleanup_fb,
+ .atomic_check = rzg2l_du_vsp_plane_atomic_check,
+ .atomic_update = rzg2l_du_vsp_plane_atomic_update,
+};
+
+static struct drm_plane_state *
+rzg2l_du_vsp_plane_atomic_duplicate_state(struct drm_plane *plane)
+{
+ struct rzg2l_du_vsp_plane_state *copy;
+
+ if (WARN_ON(!plane->state))
+ return NULL;
+
+ copy = kzalloc(sizeof(*copy), GFP_KERNEL);
+ if (!copy)
+ return NULL;
+
+ __drm_atomic_helper_plane_duplicate_state(plane, ©->state);
+
+ return ©->state;
+}
+
+static void rzg2l_du_vsp_plane_atomic_destroy_state(struct drm_plane *plane,
+ struct drm_plane_state *state)
+{
+ __drm_atomic_helper_plane_destroy_state(state);
+ kfree(to_rzg2l_vsp_plane_state(state));
+}
+
+static void rzg2l_du_vsp_plane_reset(struct drm_plane *plane)
+{
+ struct rzg2l_du_vsp_plane_state *state;
+
+ if (plane->state) {
+ rzg2l_du_vsp_plane_atomic_destroy_state(plane, plane->state);
+ plane->state = NULL;
+ }
+
+ state = kzalloc(sizeof(*state), GFP_KERNEL);
+ if (!state)
+ return;
+
+ __drm_atomic_helper_plane_reset(plane, &state->state);
+}
+
+static const struct drm_plane_funcs rzg2l_du_vsp_plane_funcs = {
+ .update_plane = drm_atomic_helper_update_plane,
+ .disable_plane = drm_atomic_helper_disable_plane,
+ .reset = rzg2l_du_vsp_plane_reset,
+ .destroy = drm_plane_cleanup,
+ .atomic_duplicate_state = rzg2l_du_vsp_plane_atomic_duplicate_state,
+ .atomic_destroy_state = rzg2l_du_vsp_plane_atomic_destroy_state,
+};
+
+static void rzg2l_du_vsp_cleanup(struct drm_device *dev, void *res)
+{
+ struct rzg2l_du_vsp *vsp = res;
+ unsigned int i;
+
+ for (i = 0; i < vsp->num_planes; ++i) {
+ struct rzg2l_du_vsp_plane *plane = &vsp->planes[i];
+
+ drm_plane_cleanup(&plane->plane);
+ }
+
+ kfree(vsp->planes);
+
+ put_device(vsp->vsp);
+}
+
+int rzg2l_du_vsp_init(struct rzg2l_du_vsp *vsp, struct device_node *np,
+ unsigned int crtcs)
+{
+ struct rzg2l_du_device *rcdu = vsp->dev;
+ struct platform_device *pdev;
+ unsigned int num_crtcs = hweight32(crtcs);
+ unsigned int num_planes = 2;
+ unsigned int i;
+ int ret;
+
+ /* Find the VSP device and initialize it. */
+ pdev = of_find_device_by_node(np);
+ if (!pdev)
+ return -ENXIO;
+
+ vsp->vsp = &pdev->dev;
+
+ ret = drmm_add_action_or_reset(&rcdu->ddev, rzg2l_du_vsp_cleanup, vsp);
+ if (ret < 0)
+ return ret;
+
+ ret = vsp1_du_init(vsp->vsp);
+ if (ret < 0)
+ return ret;
+
+ vsp->planes = kcalloc(num_planes, sizeof(*vsp->planes), GFP_KERNEL);
+ if (!vsp->planes)
+ return -ENOMEM;
+
+ for (i = 0; i < num_planes; ++i) {
+ enum drm_plane_type type = i < num_crtcs
+ ? DRM_PLANE_TYPE_PRIMARY
+ : DRM_PLANE_TYPE_OVERLAY;
+ struct rzg2l_du_vsp_plane *plane = &vsp->planes[i];
+
+ plane->vsp = vsp;
+ plane->index = i;
+ ret = drm_universal_plane_init(&rcdu->ddev, &plane->plane,
+ crtcs, &rzg2l_du_vsp_plane_funcs,
+ rzg2l_du_vsp_formats,
+ ARRAY_SIZE(rzg2l_du_vsp_formats),
+ NULL, type, NULL);
+ if (ret < 0)
+ return ret;
+
+ drm_plane_helper_add(&plane->plane,
+ &rzg2l_du_vsp_plane_helper_funcs);
+
+ drm_plane_create_alpha_property(&plane->plane);
+ drm_plane_create_zpos_property(&plane->plane, i, 0,
+ num_planes - 1);
+
+ drm_plane_create_blend_mode_property(&plane->plane,
+ BIT(DRM_MODE_BLEND_PIXEL_NONE) |
+ BIT(DRM_MODE_BLEND_PREMULTI) |
+ BIT(DRM_MODE_BLEND_COVERAGE));
+
+ vsp->num_planes++;
+ }
+
+ return 0;
+}
diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.h b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.h
new file mode 100644
index 000000000000..3eb9708f60c7
--- /dev/null
+++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.h
@@ -0,0 +1,94 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * RZ/G2L Display Unit VSP-Based Compositor
+ *
+ * Copyright (C) 2023 Renesas Electronics Corporation
+ *
+ * Based on rcar_du_vsp.h
+ */
+
+#ifndef __RZG2L_DU_VSP_H__
+#define __RZG2L_DU_VSP_H__
+
+#include <drm/drm_plane.h>
+
+struct drm_framebuffer;
+struct rzg2l_du_format_info;
+struct rzg2l_du_vsp;
+struct sg_table;
+
+struct rzg2l_du_vsp_plane {
+ struct drm_plane plane;
+ struct rzg2l_du_vsp *vsp;
+ unsigned int index;
+};
+
+struct rzg2l_du_vsp {
+ unsigned int index;
+ struct device *vsp;
+ struct rzg2l_du_device *dev;
+ struct rzg2l_du_vsp_plane *planes;
+ unsigned int num_planes;
+};
+
+static inline struct rzg2l_du_vsp_plane *to_rzg2l_vsp_plane(struct drm_plane *p)
+{
+ return container_of(p, struct rzg2l_du_vsp_plane, plane);
+}
+
+/**
+ * struct rzg2l_du_vsp_plane_state - Driver-specific plane state
+ * @state: base DRM plane state
+ * @format: information about the pixel format used by the plane
+ * @sg_tables: scatter-gather tables for the frame buffer memory
+ */
+struct rzg2l_du_vsp_plane_state {
+ struct drm_plane_state state;
+
+ const struct rzg2l_du_format_info *format;
+ struct sg_table sg_tables[3];
+};
+
+static inline struct rzg2l_du_vsp_plane_state *
+to_rzg2l_vsp_plane_state(struct drm_plane_state *state)
+{
+ return container_of(state, struct rzg2l_du_vsp_plane_state, state);
+}
+
+#ifdef CONFIG_DRM_RCAR_VSP
+int rzg2l_du_vsp_init(struct rzg2l_du_vsp *vsp, struct device_node *np,
+ unsigned int crtcs);
+void rzg2l_du_vsp_enable(struct rzg2l_du_crtc *crtc);
+void rzg2l_du_vsp_disable(struct rzg2l_du_crtc *crtc);
+void rzg2l_du_vsp_atomic_begin(struct rzg2l_du_crtc *crtc);
+void rzg2l_du_vsp_atomic_flush(struct rzg2l_du_crtc *crtc);
+int rzg2l_du_vsp_map_fb(struct rzg2l_du_vsp *vsp, struct drm_framebuffer *fb,
+ struct sg_table sg_tables[3]);
+void rzg2l_du_vsp_unmap_fb(struct rzg2l_du_vsp *vsp, struct drm_framebuffer *fb,
+ struct sg_table sg_tables[3]);
+#else
+static inline int rzg2l_du_vsp_init(struct rzg2l_du_vsp *vsp, struct device_node *np,
+ unsigned int crtcs)
+{
+ return -ENXIO;
+}
+
+static inline void rzg2l_du_vsp_enable(struct rzg2l_du_crtc *crtc) { };
+static inline void rzg2l_du_vsp_disable(struct rzg2l_du_crtc *crtc) { };
+static inline void rzg2l_du_vsp_atomic_begin(struct rzg2l_du_crtc *crtc) { };
+static inline void rzg2l_du_vsp_atomic_flush(struct rzg2l_du_crtc *crtc) { };
+static inline int rzg2l_du_vsp_map_fb(struct rzg2l_du_vsp *vsp,
+ struct drm_framebuffer *fb,
+ struct sg_table sg_tables[3])
+{
+ return -ENXIO;
+}
+
+static inline void rzg2l_du_vsp_unmap_fb(struct rzg2l_du_vsp *vsp,
+ struct drm_framebuffer *fb,
+ struct sg_table sg_tables[3])
+{
+}
+#endif
+
+#endif /* __RZG2L_DU_VSP_H__ */
--
2.25.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v9 RESEND 5/5] MAINTAINERS: Add maintainer for RZ DU drivers
2023-05-02 10:09 [PATCH v9 RESEND 0/5] Add RZ/{G2L,G2LC} and RZ/V2L Display Unit support Biju Das
` (3 preceding siblings ...)
2023-05-02 10:09 ` [PATCH v9 RESEND 4/5] drm: Add RZ/G2L DU Support Biju Das
@ 2023-05-02 10:09 ` Biju Das
2023-05-15 7:57 ` [PATCH v9 RESEND 0/5] Add RZ/{G2L,G2LC} and RZ/V2L Display Unit support Biju Das
5 siblings, 0 replies; 20+ messages in thread
From: Biju Das @ 2023-05-02 10:09 UTC (permalink / raw)
To: David Airlie, Daniel Vetter, Geert Uytterhoeven,
Laurent Pinchart, Krzysztof Kozlowski
Cc: Biju Das, Fabrizio Castro, Prabhakar Mahadev Lad, dri-devel,
linux-renesas-soc
Add my self as maintainer for RZ DU drivers.
While at it, update the entries for common parts, rcar-du and shmobile.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
v8->v9:
* Added Rb tag from Laurent.
* Updated entries for common parts(Makefile and Kconfig).
v8:
* New patch
---
MAINTAINERS | 15 +++++++++++++--
1 file changed, 13 insertions(+), 2 deletions(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index 1218a2ec6d97..ac57d8aa3a26 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6948,7 +6948,7 @@ F: drivers/gpu/host1x/
F: include/linux/host1x.h
F: include/uapi/drm/tegra_drm.h
-DRM DRIVERS FOR RENESAS
+DRM DRIVERS FOR RENESAS RCAR AND SHMOBILE
M: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
M: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
L: dri-devel@lists.freedesktop.org
@@ -6959,9 +6959,20 @@ F: Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml
F: Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.yaml
F: Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml
F: Documentation/devicetree/bindings/display/renesas,du.yaml
-F: drivers/gpu/drm/renesas/
+F: drivers/gpu/drm/renesas/Kconfig
+F: drivers/gpu/drm/renesas/Makefile
+F: drivers/gpu/drm/renesas/rcar-du/
+F: drivers/gpu/drm/renesas/shmobile/
F: include/linux/platform_data/shmob_drm.h
+DRM DRIVERS FOR RENESAS RZ
+M: Biju Das <biju.das.jz@bp.renesas.com>
+L: dri-devel@lists.freedesktop.org
+L: linux-renesas-soc@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml
+F: drivers/gpu/drm/renesas/rz-du/
+
DRM DRIVERS FOR ROCKCHIP
M: Sandy Huang <hjc@rock-chips.com>
M: Heiko Stübner <heiko@sntech.de>
--
2.25.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* RE: [PATCH v9 RESEND 0/5] Add RZ/{G2L,G2LC} and RZ/V2L Display Unit support
2023-05-02 10:09 [PATCH v9 RESEND 0/5] Add RZ/{G2L,G2LC} and RZ/V2L Display Unit support Biju Das
` (4 preceding siblings ...)
2023-05-02 10:09 ` [PATCH v9 RESEND 5/5] MAINTAINERS: Add maintainer for RZ DU drivers Biju Das
@ 2023-05-15 7:57 ` Biju Das
2023-05-25 14:30 ` Biju Das
5 siblings, 1 reply; 20+ messages in thread
From: Biju Das @ 2023-05-15 7:57 UTC (permalink / raw)
To: David Airlie, Daniel Vetter, Philipp Zabel, Geert Uytterhoeven,
Laurent Pinchart, Kieran Bingham
Cc: dri-devel, linux-renesas-soc, Fabrizio Castro, Prabhakar Mahadev Lad
Hi All,
Gentle ping. Are we happy with this patch series?
Cheers,
Biju
> Subject: [PATCH v9 RESEND 0/5] Add RZ/{G2L,G2LC} and RZ/V2L Display Unit
> support
>
> RZ/G2L LCD controller composed of Frame compression Processor(FCPVD),
> Video signal processor (VSPD) and Display unit(DU). The output of LCDC
> is connected to Display parallel interface and MIPI link video
> interface.
>
> The output from DSI is connected to ADV7535.
>
> Created a vendor specific directory renesas and moved all renesas drm
> drivers to it (rcar-du and shmobile). Then added support for RZ/G2L DU
> DRM driver by creating rz_du directory.
>
> Ref:
>
>
> v8->v9:
> * Added Rb tag from Laurent and Acked-by tag from Kieran for patch#1.
> * Added Rb tag from Laurent and Geert for patch#3.
> * Dropped reset_control_assert() from error patch for
> rzg2l_du_crtc_get() as
> suggested by Philipp Zabel.
> * Added Rb tag from Laurent oatch#5.
> * Updated MAINTAINERS entries for common parts(Makefile and Kconfig).
> v7->v8:
> * Moved rcar-du and shmobile DRM drivers to renesas specific vendor
> directory.
> * Fixed the typo vsp2->du in RZ/V2L DU bindings patch.
> * Added Rb tag from Rob for RZ/V2L DU bindings patch.
> * Dropped RCar du lib and created RZ/G2L DU DRM driver by creating
> rz_du folder.
> * Updated MAINTAINERS entries.
> v6->v7:
> * Split DU lib and RZ/G2L du driver as separate patch series as
> DU support added to more platforms based on RZ/G2L alike SoCs.
> * Rebased to latest drm-tip.
> * Added patch #2 for binding support for RZ/V2L DU
> * Added patch #4 for driver support for RZ/V2L DU
> * Added patch #5 for SoC DTSI support for RZ/G2L DU
> * Added patch #6 for SoC DTSI support for RZ/V2L DU
> * Added patch #7 for Enabling DU on SMARC EVK based on RZ/{G2L,V2L}
> SoCs.
> * Added patch #8 for Enabling DU on SMARC EVK based on RZ/G2LC SoC.
> v5->v6:
> * Merged DU lib and RZ/G2L du driver in same patch series
> * Rebased to latest drm-misc.
> * Merged patch#1 to RZ/G2L Driver patch.
> * Updated KConfig dependency from ARCH_RENESAS->ARCH_RZG2L.
> * Optimized rzg2l_du_output_name() by removing unsupported outputs.
>
> v4->v5:
> * Added Rb tag from Rob for binding patch.
> * Started using RCar DU libs(kms, vsp and encoder)
> * Started using rcar_du_device, rcar_du_write, rcar_du_crtc,
> rcar_du_format_info and rcar_du_encoder.
> v3->v4:
> * Changed compatible name from renesas,du-r9a07g044->renesas,r9a07g044-
> du
> * started using same compatible for RZ/G2{L,LC}
> * Removed rzg2l_du_group.h and struct rzg2l_du_group
> * Renamed __rzg2l_du_group_start_stop->rzg2l_du_start_stop
> * Removed rzg2l_du_group_restart
> * Updated rzg2l_du_crtc_set_display_timing
> * Removed mode_valid callback.
> * Updated rzg2l_du_crtc_create() parameters
> * Updated compatible
> * Removed RZG2L_DU_MAX_GROUPS
> V2->v3:
> * Added new bindings for RZ/G2L DU
> * Removed indirection and created new DRM driver based on R-Car DU
> v1->v2:
> * Based on [1], all references to 'rzg2l_lcdc' replaced with 'rzg2l_du'
> * Updated commit description for bindings
> * Removed LCDC references from bindings
> * Changed clock name from du.0->aclk from bindings
> * Changed reset name from du.0->du from bindings
> * Replaced crtc_helper_funcs->rcar_crtc_helper_funcs
> * Updated macro DRM_RZG2L_LCDC->DRM_RZG2L_DU
> * Replaced rzg2l-lcdc-drm->rzg2l-du-drm
> * Added forward declaration for struct reset_control
>
> [1]
>
> Biju Das (5):
> drm: Place Renesas drivers in a separate dir
> dt-bindings: display: Document Renesas RZ/G2L DU bindings
> dt-bindings: display: renesas,rzg2l-du: Document RZ/V2L DU bindings
> drm: Add RZ/G2L DU Support
> MAINTAINERS: Add maintainer for RZ DU drivers
>
> .../bindings/display/renesas,rzg2l-du.yaml | 129 +++
> MAINTAINERS | 16 +-
> drivers/gpu/drm/Kconfig | 4 +-
> drivers/gpu/drm/Makefile | 3 +-
> drivers/gpu/drm/renesas/Kconfig | 5 +
> drivers/gpu/drm/renesas/Makefile | 5 +
> drivers/gpu/drm/{ => renesas}/rcar-du/Kconfig | 0
> .../gpu/drm/{ => renesas}/rcar-du/Makefile | 0
> .../gpu/drm/{ => renesas}/rcar-du/rcar_cmm.c | 0
> .../gpu/drm/{ => renesas}/rcar-du/rcar_cmm.h | 0
> .../drm/{ => renesas}/rcar-du/rcar_du_crtc.c | 0
> .../drm/{ => renesas}/rcar-du/rcar_du_crtc.h | 0
> .../drm/{ => renesas}/rcar-du/rcar_du_drv.c | 0
> .../drm/{ => renesas}/rcar-du/rcar_du_drv.h | 0
> .../{ => renesas}/rcar-du/rcar_du_encoder.c | 0
> .../{ => renesas}/rcar-du/rcar_du_encoder.h | 0
> .../drm/{ => renesas}/rcar-du/rcar_du_group.c | 0
> .../drm/{ => renesas}/rcar-du/rcar_du_group.h | 0
> .../drm/{ => renesas}/rcar-du/rcar_du_kms.c | 0
> .../drm/{ => renesas}/rcar-du/rcar_du_kms.h | 0
> .../drm/{ => renesas}/rcar-du/rcar_du_plane.c | 0
> .../drm/{ => renesas}/rcar-du/rcar_du_plane.h | 0
> .../drm/{ => renesas}/rcar-du/rcar_du_regs.h | 0
> .../drm/{ => renesas}/rcar-du/rcar_du_vsp.c | 0
> .../drm/{ => renesas}/rcar-du/rcar_du_vsp.h | 0
> .../{ => renesas}/rcar-du/rcar_du_writeback.c | 0
> .../{ => renesas}/rcar-du/rcar_du_writeback.h | 0
> .../drm/{ => renesas}/rcar-du/rcar_dw_hdmi.c | 0
> .../gpu/drm/{ => renesas}/rcar-du/rcar_lvds.c | 0
> .../gpu/drm/{ => renesas}/rcar-du/rcar_lvds.h | 0
> .../{ => renesas}/rcar-du/rcar_lvds_regs.h | 0
> .../drm/{ => renesas}/rcar-du/rcar_mipi_dsi.c | 0
> .../drm/{ => renesas}/rcar-du/rcar_mipi_dsi.h | 0
> .../rcar-du/rcar_mipi_dsi_regs.h | 0
> .../{ => renesas}/rcar-du/rzg2l_mipi_dsi.c | 0
> .../rcar-du/rzg2l_mipi_dsi_regs.h | 0
> drivers/gpu/drm/renesas/rz-du/Kconfig | 20 +
> drivers/gpu/drm/renesas/rz-du/Makefile | 8 +
> drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c | 714 ++++++++++++++++
> drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.h | 99 +++
> drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c | 188 +++++
> drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h | 89 ++
> .../gpu/drm/renesas/rz-du/rzg2l_du_encoder.c | 112 +++
> .../gpu/drm/renesas/rz-du/rzg2l_du_encoder.h | 28 +
> drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.c | 770 ++++++++++++++++++
> drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.h | 43 +
> drivers/gpu/drm/renesas/rz-du/rzg2l_du_regs.h | 67 ++
> drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.c | 430 ++++++++++
> drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.h | 94 +++
> .../gpu/drm/{ => renesas}/shmobile/Kconfig | 0
> .../gpu/drm/{ => renesas}/shmobile/Makefile | 0
> .../shmobile/shmob_drm_backlight.c | 0
> .../shmobile/shmob_drm_backlight.h | 0
> .../{ => renesas}/shmobile/shmob_drm_crtc.c | 0
> .../{ => renesas}/shmobile/shmob_drm_crtc.h | 0
> .../{ => renesas}/shmobile/shmob_drm_drv.c | 0
> .../{ => renesas}/shmobile/shmob_drm_drv.h | 0
> .../{ => renesas}/shmobile/shmob_drm_kms.c | 0
> .../{ => renesas}/shmobile/shmob_drm_kms.h | 0
> .../{ => renesas}/shmobile/shmob_drm_plane.c | 0
> .../{ => renesas}/shmobile/shmob_drm_plane.h | 0
> .../{ => renesas}/shmobile/shmob_drm_regs.h | 0
> 62 files changed, 2816 insertions(+), 8 deletions(-) create mode
> 100644 Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml
> create mode 100644 drivers/gpu/drm/renesas/Kconfig create mode 100644
> drivers/gpu/drm/renesas/Makefile rename drivers/gpu/drm/{ =>
> renesas}/rcar-du/Kconfig (100%) rename drivers/gpu/drm/{ =>
> renesas}/rcar-du/Makefile (100%) rename drivers/gpu/drm/{ =>
> renesas}/rcar-du/rcar_cmm.c (100%) rename drivers/gpu/drm/{ =>
> renesas}/rcar-du/rcar_cmm.h (100%) rename drivers/gpu/drm/{ =>
> renesas}/rcar-du/rcar_du_crtc.c (100%) rename drivers/gpu/drm/{ =>
> renesas}/rcar-du/rcar_du_crtc.h (100%) rename drivers/gpu/drm/{ =>
> renesas}/rcar-du/rcar_du_drv.c (100%) rename drivers/gpu/drm/{ =>
> renesas}/rcar-du/rcar_du_drv.h (100%) rename drivers/gpu/drm/{ =>
> renesas}/rcar-du/rcar_du_encoder.c (100%) rename drivers/gpu/drm/{ =>
> renesas}/rcar-du/rcar_du_encoder.h (100%) rename drivers/gpu/drm/{ =>
> renesas}/rcar-du/rcar_du_group.c (100%) rename drivers/gpu/drm/{ =>
> renesas}/rcar-du/rcar_du_group.h (100%) rename drivers/gpu/drm/{ =>
> renesas}/rcar-du/rcar_du_kms.c (100%) rename drivers/gpu/drm/{ =>
> renesas}/rcar-du/rcar_du_kms.h (100%) rename drivers/gpu/drm/{ =>
> renesas}/rcar-du/rcar_du_plane.c (100%) rename drivers/gpu/drm/{ =>
> renesas}/rcar-du/rcar_du_plane.h (100%) rename drivers/gpu/drm/{ =>
> renesas}/rcar-du/rcar_du_regs.h (100%) rename drivers/gpu/drm/{ =>
> renesas}/rcar-du/rcar_du_vsp.c (100%) rename drivers/gpu/drm/{ =>
> renesas}/rcar-du/rcar_du_vsp.h (100%) rename drivers/gpu/drm/{ =>
> renesas}/rcar-du/rcar_du_writeback.c (100%) rename drivers/gpu/drm/{ =>
> renesas}/rcar-du/rcar_du_writeback.h (100%) rename drivers/gpu/drm/{ =>
> renesas}/rcar-du/rcar_dw_hdmi.c (100%) rename drivers/gpu/drm/{ =>
> renesas}/rcar-du/rcar_lvds.c (100%) rename drivers/gpu/drm/{ =>
> renesas}/rcar-du/rcar_lvds.h (100%) rename drivers/gpu/drm/{ =>
> renesas}/rcar-du/rcar_lvds_regs.h (100%) rename drivers/gpu/drm/{ =>
> renesas}/rcar-du/rcar_mipi_dsi.c (100%) rename drivers/gpu/drm/{ =>
> renesas}/rcar-du/rcar_mipi_dsi.h (100%) rename drivers/gpu/drm/{ =>
> renesas}/rcar-du/rcar_mipi_dsi_regs.h (100%) rename drivers/gpu/drm/{
> => renesas}/rcar-du/rzg2l_mipi_dsi.c (100%) rename drivers/gpu/drm/{ =>
> renesas}/rcar-du/rzg2l_mipi_dsi_regs.h (100%) create mode 100644
> drivers/gpu/drm/renesas/rz-du/Kconfig
> create mode 100644 drivers/gpu/drm/renesas/rz-du/Makefile
> create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c
> create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.h
> create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c
> create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h
> create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.c
> create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.h
> create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.c
> create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.h
> create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_regs.h
> create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.c
> create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.h
> rename drivers/gpu/drm/{ => renesas}/shmobile/Kconfig (100%) rename
> drivers/gpu/drm/{ => renesas}/shmobile/Makefile (100%) rename
> drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_backlight.c (100%)
> rename drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_backlight.h
> (100%) rename drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_crtc.c
> (100%) rename drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_crtc.h
> (100%) rename drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_drv.c
> (100%) rename drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_drv.h
> (100%) rename drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_kms.c
> (100%) rename drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_kms.h
> (100%) rename drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_plane.c
> (100%) rename drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_plane.h
> (100%) rename drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_regs.h
> (100%)
>
> --
> 2.25.1
^ permalink raw reply [flat|nested] 20+ messages in thread
* RE: [PATCH v9 RESEND 0/5] Add RZ/{G2L,G2LC} and RZ/V2L Display Unit support
2023-05-15 7:57 ` [PATCH v9 RESEND 0/5] Add RZ/{G2L,G2LC} and RZ/V2L Display Unit support Biju Das
@ 2023-05-25 14:30 ` Biju Das
2023-05-29 14:13 ` Laurent Pinchart
0 siblings, 1 reply; 20+ messages in thread
From: Biju Das @ 2023-05-25 14:30 UTC (permalink / raw)
To: David Airlie, Daniel Vetter, Philipp Zabel, Geert Uytterhoeven,
Laurent Pinchart, Kieran Bingham
Cc: dri-devel, linux-renesas-soc, Fabrizio Castro,
Prabhakar Mahadev Lad, linux-kernel
Hi DRM maintainers,
Gentle ping.
Are we happy with moving all Renesas drm drivers to Renesas specific
directory or preference is for separate one??
If it is later, I can send RZ/G2L drm driver separate.
Otherwise, I need to rebase and resend.
Please let me know your preference.
Cheers,
Biju
> -----Original Message-----
> From: Biju Das
> Sent: Monday, May 15, 2023 8:58 AM
> To: David Airlie <airlied@gmail.com>; Daniel Vetter <daniel@ffwll.ch>;
> Philipp Zabel <p.zabel@pengutronix.de>; Geert Uytterhoeven
> <geert+renesas@glider.be>; Laurent Pinchart
> <laurent.pinchart@ideasonboard.com>; Kieran Bingham
> <kieran.bingham+renesas@ideasonboard.com>
> Cc: dri-devel@lists.freedesktop.org; linux-renesas-soc@vger.kernel.org;
> Fabrizio Castro <fabrizio.castro.jz@renesas.com>; Prabhakar Mahadev Lad
> <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Subject: RE: [PATCH v9 RESEND 0/5] Add RZ/{G2L,G2LC} and RZ/V2L Display
> Unit support
>
> Hi All,
>
> Gentle ping. Are we happy with this patch series?
>
> Cheers,
> Biju
>
> > Subject: [PATCH v9 RESEND 0/5] Add RZ/{G2L,G2LC} and RZ/V2L Display
> > Unit support
> >
> > RZ/G2L LCD controller composed of Frame compression Processor(FCPVD),
> > Video signal processor (VSPD) and Display unit(DU). The output of LCDC
> > is connected to Display parallel interface and MIPI link video
> > interface.
> >
> > The output from DSI is connected to ADV7535.
> >
> > Created a vendor specific directory renesas and moved all renesas drm
> > drivers to it (rcar-du and shmobile). Then added support for RZ/G2L DU
> > DRM driver by creating rz_du directory.
> >
> > Ref:
> >
> >
> > v8->v9:
> > * Added Rb tag from Laurent and Acked-by tag from Kieran for patch#1.
> > * Added Rb tag from Laurent and Geert for patch#3.
> > * Dropped reset_control_assert() from error patch for
> > rzg2l_du_crtc_get() as
> > suggested by Philipp Zabel.
> > * Added Rb tag from Laurent oatch#5.
> > * Updated MAINTAINERS entries for common parts(Makefile and Kconfig).
> > v7->v8:
> > * Moved rcar-du and shmobile DRM drivers to renesas specific vendor
> > directory.
> > * Fixed the typo vsp2->du in RZ/V2L DU bindings patch.
> > * Added Rb tag from Rob for RZ/V2L DU bindings patch.
> > * Dropped RCar du lib and created RZ/G2L DU DRM driver by creating
> > rz_du folder.
> > * Updated MAINTAINERS entries.
> > v6->v7:
> > * Split DU lib and RZ/G2L du driver as separate patch series as
> > DU support added to more platforms based on RZ/G2L alike SoCs.
> > * Rebased to latest drm-tip.
> > * Added patch #2 for binding support for RZ/V2L DU
> > * Added patch #4 for driver support for RZ/V2L DU
> > * Added patch #5 for SoC DTSI support for RZ/G2L DU
> > * Added patch #6 for SoC DTSI support for RZ/V2L DU
> > * Added patch #7 for Enabling DU on SMARC EVK based on RZ/{G2L,V2L}
> > SoCs.
> > * Added patch #8 for Enabling DU on SMARC EVK based on RZ/G2LC SoC.
> > v5->v6:
> > * Merged DU lib and RZ/G2L du driver in same patch series
> > * Rebased to latest drm-misc.
> > * Merged patch#1 to RZ/G2L Driver patch.
> > * Updated KConfig dependency from ARCH_RENESAS->ARCH_RZG2L.
> > * Optimized rzg2l_du_output_name() by removing unsupported outputs.
> >
> > v4->v5:
> > * Added Rb tag from Rob for binding patch.
> > * Started using RCar DU libs(kms, vsp and encoder)
> > * Started using rcar_du_device, rcar_du_write, rcar_du_crtc,
> > rcar_du_format_info and rcar_du_encoder.
> > v3->v4:
> > * Changed compatible name from
> > renesas,du-r9a07g044->renesas,r9a07g044-
> > du
> > * started using same compatible for RZ/G2{L,LC}
> > * Removed rzg2l_du_group.h and struct rzg2l_du_group
> > * Renamed __rzg2l_du_group_start_stop->rzg2l_du_start_stop
> > * Removed rzg2l_du_group_restart
> > * Updated rzg2l_du_crtc_set_display_timing
> > * Removed mode_valid callback.
> > * Updated rzg2l_du_crtc_create() parameters
> > * Updated compatible
> > * Removed RZG2L_DU_MAX_GROUPS
> > V2->v3:
> > * Added new bindings for RZ/G2L DU
> > * Removed indirection and created new DRM driver based on R-Car DU
> > v1->v2:
> > * Based on [1], all references to 'rzg2l_lcdc' replaced with
> 'rzg2l_du'
> > * Updated commit description for bindings
> > * Removed LCDC references from bindings
> > * Changed clock name from du.0->aclk from bindings
> > * Changed reset name from du.0->du from bindings
> > * Replaced crtc_helper_funcs->rcar_crtc_helper_funcs
> > * Updated macro DRM_RZG2L_LCDC->DRM_RZG2L_DU
> > * Replaced rzg2l-lcdc-drm->rzg2l-du-drm
> > * Added forward declaration for struct reset_control
> >
> > [1]
> >
> > Biju Das (5):
> > drm: Place Renesas drivers in a separate dir
> > dt-bindings: display: Document Renesas RZ/G2L DU bindings
> > dt-bindings: display: renesas,rzg2l-du: Document RZ/V2L DU bindings
> > drm: Add RZ/G2L DU Support
> > MAINTAINERS: Add maintainer for RZ DU drivers
> >
> > .../bindings/display/renesas,rzg2l-du.yaml | 129 +++
> > MAINTAINERS | 16 +-
> > drivers/gpu/drm/Kconfig | 4 +-
> > drivers/gpu/drm/Makefile | 3 +-
> > drivers/gpu/drm/renesas/Kconfig | 5 +
> > drivers/gpu/drm/renesas/Makefile | 5 +
> > drivers/gpu/drm/{ => renesas}/rcar-du/Kconfig | 0
> > .../gpu/drm/{ => renesas}/rcar-du/Makefile | 0
> > .../gpu/drm/{ => renesas}/rcar-du/rcar_cmm.c | 0
> > .../gpu/drm/{ => renesas}/rcar-du/rcar_cmm.h | 0
> > .../drm/{ => renesas}/rcar-du/rcar_du_crtc.c | 0
> > .../drm/{ => renesas}/rcar-du/rcar_du_crtc.h | 0
> > .../drm/{ => renesas}/rcar-du/rcar_du_drv.c | 0
> > .../drm/{ => renesas}/rcar-du/rcar_du_drv.h | 0
> > .../{ => renesas}/rcar-du/rcar_du_encoder.c | 0
> > .../{ => renesas}/rcar-du/rcar_du_encoder.h | 0
> > .../drm/{ => renesas}/rcar-du/rcar_du_group.c | 0
> > .../drm/{ => renesas}/rcar-du/rcar_du_group.h | 0
> > .../drm/{ => renesas}/rcar-du/rcar_du_kms.c | 0
> > .../drm/{ => renesas}/rcar-du/rcar_du_kms.h | 0
> > .../drm/{ => renesas}/rcar-du/rcar_du_plane.c | 0
> > .../drm/{ => renesas}/rcar-du/rcar_du_plane.h | 0
> > .../drm/{ => renesas}/rcar-du/rcar_du_regs.h | 0
> > .../drm/{ => renesas}/rcar-du/rcar_du_vsp.c | 0
> > .../drm/{ => renesas}/rcar-du/rcar_du_vsp.h | 0
> > .../{ => renesas}/rcar-du/rcar_du_writeback.c | 0
> > .../{ => renesas}/rcar-du/rcar_du_writeback.h | 0
> > .../drm/{ => renesas}/rcar-du/rcar_dw_hdmi.c | 0
> > .../gpu/drm/{ => renesas}/rcar-du/rcar_lvds.c | 0
> > .../gpu/drm/{ => renesas}/rcar-du/rcar_lvds.h | 0
> > .../{ => renesas}/rcar-du/rcar_lvds_regs.h | 0
> > .../drm/{ => renesas}/rcar-du/rcar_mipi_dsi.c | 0
> > .../drm/{ => renesas}/rcar-du/rcar_mipi_dsi.h | 0
> > .../rcar-du/rcar_mipi_dsi_regs.h | 0
> > .../{ => renesas}/rcar-du/rzg2l_mipi_dsi.c | 0
> > .../rcar-du/rzg2l_mipi_dsi_regs.h | 0
> > drivers/gpu/drm/renesas/rz-du/Kconfig | 20 +
> > drivers/gpu/drm/renesas/rz-du/Makefile | 8 +
> > drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c | 714 ++++++++++++++++
> > drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.h | 99 +++
> > drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c | 188 +++++
> > drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h | 89 ++
> > .../gpu/drm/renesas/rz-du/rzg2l_du_encoder.c | 112 +++
> > .../gpu/drm/renesas/rz-du/rzg2l_du_encoder.h | 28 +
> > drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.c | 770 ++++++++++++++++++
> > drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.h | 43 +
> > drivers/gpu/drm/renesas/rz-du/rzg2l_du_regs.h | 67 ++
> > drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.c | 430 ++++++++++
> > drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.h | 94 +++
> > .../gpu/drm/{ => renesas}/shmobile/Kconfig | 0
> > .../gpu/drm/{ => renesas}/shmobile/Makefile | 0
> > .../shmobile/shmob_drm_backlight.c | 0
> > .../shmobile/shmob_drm_backlight.h | 0
> > .../{ => renesas}/shmobile/shmob_drm_crtc.c | 0
> > .../{ => renesas}/shmobile/shmob_drm_crtc.h | 0
> > .../{ => renesas}/shmobile/shmob_drm_drv.c | 0
> > .../{ => renesas}/shmobile/shmob_drm_drv.h | 0
> > .../{ => renesas}/shmobile/shmob_drm_kms.c | 0
> > .../{ => renesas}/shmobile/shmob_drm_kms.h | 0
> > .../{ => renesas}/shmobile/shmob_drm_plane.c | 0
> > .../{ => renesas}/shmobile/shmob_drm_plane.h | 0
> > .../{ => renesas}/shmobile/shmob_drm_regs.h | 0
> > 62 files changed, 2816 insertions(+), 8 deletions(-) create mode
> > 100644 Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml
> > create mode 100644 drivers/gpu/drm/renesas/Kconfig create mode
> > 100644 drivers/gpu/drm/renesas/Makefile rename drivers/gpu/drm/{ =>
> > renesas}/rcar-du/Kconfig (100%) rename drivers/gpu/drm/{ =>
> > renesas}/rcar-du/Makefile (100%) rename drivers/gpu/drm/{ =>
> > renesas}/rcar-du/rcar_cmm.c (100%) rename drivers/gpu/drm/{ =>
> > renesas}/rcar-du/rcar_cmm.h (100%) rename drivers/gpu/drm/{ =>
> > renesas}/rcar-du/rcar_du_crtc.c (100%) rename drivers/gpu/drm/{ =>
> > renesas}/rcar-du/rcar_du_crtc.h (100%) rename drivers/gpu/drm/{ =>
> > renesas}/rcar-du/rcar_du_drv.c (100%) rename drivers/gpu/drm/{ =>
> > renesas}/rcar-du/rcar_du_drv.h (100%) rename drivers/gpu/drm/{ =>
> > renesas}/rcar-du/rcar_du_encoder.c (100%) rename drivers/gpu/drm/{ =>
> > renesas}/rcar-du/rcar_du_encoder.h (100%) rename drivers/gpu/drm/{ =>
> > renesas}/rcar-du/rcar_du_group.c (100%) rename drivers/gpu/drm/{ =>
> > renesas}/rcar-du/rcar_du_group.h (100%) rename drivers/gpu/drm/{ =>
> > renesas}/rcar-du/rcar_du_kms.c (100%) rename drivers/gpu/drm/{ =>
> > renesas}/rcar-du/rcar_du_kms.h (100%) rename drivers/gpu/drm/{ =>
> > renesas}/rcar-du/rcar_du_plane.c (100%) rename drivers/gpu/drm/{ =>
> > renesas}/rcar-du/rcar_du_plane.h (100%) rename drivers/gpu/drm/{ =>
> > renesas}/rcar-du/rcar_du_regs.h (100%) rename drivers/gpu/drm/{ =>
> > renesas}/rcar-du/rcar_du_vsp.c (100%) rename drivers/gpu/drm/{ =>
> > renesas}/rcar-du/rcar_du_vsp.h (100%) rename drivers/gpu/drm/{ =>
> > renesas}/rcar-du/rcar_du_writeback.c (100%) rename drivers/gpu/drm/{
> > => renesas}/rcar-du/rcar_du_writeback.h (100%) rename
> > drivers/gpu/drm/{ => renesas}/rcar-du/rcar_dw_hdmi.c (100%) rename
> > drivers/gpu/drm/{ => renesas}/rcar-du/rcar_lvds.c (100%) rename
> > drivers/gpu/drm/{ => renesas}/rcar-du/rcar_lvds.h (100%) rename
> > drivers/gpu/drm/{ => renesas}/rcar-du/rcar_lvds_regs.h (100%) rename
> > drivers/gpu/drm/{ => renesas}/rcar-du/rcar_mipi_dsi.c (100%) rename
> > drivers/gpu/drm/{ => renesas}/rcar-du/rcar_mipi_dsi.h (100%) rename
> > drivers/gpu/drm/{ => renesas}/rcar-du/rcar_mipi_dsi_regs.h (100%)
> > rename drivers/gpu/drm/{ => renesas}/rcar-du/rzg2l_mipi_dsi.c (100%)
> > rename drivers/gpu/drm/{ => renesas}/rcar-du/rzg2l_mipi_dsi_regs.h
> > (100%) create mode 100644 drivers/gpu/drm/renesas/rz-du/Kconfig
> > create mode 100644 drivers/gpu/drm/renesas/rz-du/Makefile
> > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c
> > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.h
> > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c
> > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h
> > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.c
> > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.h
> > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.c
> > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.h
> > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_regs.h
> > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.c
> > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.h
> > rename drivers/gpu/drm/{ => renesas}/shmobile/Kconfig (100%) rename
> > drivers/gpu/drm/{ => renesas}/shmobile/Makefile (100%) rename
> > drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_backlight.c (100%)
> > rename drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_backlight.h
> > (100%) rename drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_crtc.c
> > (100%) rename drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_crtc.h
> > (100%) rename drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_drv.c
> > (100%) rename drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_drv.h
> > (100%) rename drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_kms.c
> > (100%) rename drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_kms.h
> > (100%) rename drivers/gpu/drm/{ =>
> > renesas}/shmobile/shmob_drm_plane.c
> > (100%) rename drivers/gpu/drm/{ =>
> > renesas}/shmobile/shmob_drm_plane.h
> > (100%) rename drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_regs.h
> > (100%)
> >
> > --
> > 2.25.1
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v9 RESEND 2/5] dt-bindings: display: Document Renesas RZ/G2L DU bindings
2023-05-02 10:09 ` [PATCH v9 RESEND 2/5] dt-bindings: display: Document Renesas RZ/G2L DU bindings Biju Das
@ 2023-05-29 13:49 ` Laurent Pinchart
2023-05-29 14:04 ` Biju Das
0 siblings, 1 reply; 20+ messages in thread
From: Laurent Pinchart @ 2023-05-29 13:49 UTC (permalink / raw)
To: Biju Das
Cc: David Airlie, Daniel Vetter, Rob Herring, Krzysztof Kozlowski,
dri-devel, linux-renesas-soc, devicetree, Geert Uytterhoeven,
Fabrizio Castro, Prabhakar Mahadev Lad, Rob Herring
Hi Biju,
Thank you for the patch.
On Tue, May 02, 2023 at 11:09:09AM +0100, Biju Das wrote:
> The RZ/G2L LCD controller is composed of Frame Compression Processor
> (FCPVD), Video Signal Processor (VSPD), and Display Unit (DU).
>
> The DU module supports the following hardware features
> − Display Parallel Interface (DPI) and MIPI LINK Video Interface
> − Display timing master
> − Generates video timings
> − Selecting the polarity of output DCLK, HSYNC, VSYNC, and DE
> − Supports Progressive
> − Input data format (from VSPD): RGB888, RGB666
> − Output data format: same as Input data format
> − Supporting Full HD (1920 pixels x 1080 lines) for MIPI-DSI Output
> − Supporting WXGA (1280 pixels x 800 lines) for Parallel Output
>
> This patch document DU module found on RZ/G2L LCDC.
s/document/documents the/
> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
> Reviewed-by: Rob Herring <robh@kernel.org>
> ---
> v8->v9:
> * No change
> v7->v8:
> * No change
> v6->v7:
> * No change
> v5->v6:
> * No change.
> v4->v5:
> * Added Rb tag from Rob.
> v3->v4:
> * Changed compatible name from renesas,du-r9a07g044->renesas,r9a07g044-du
> * started using same compatible for RZ/G2{L,LC}
> v3: New patch
> ---
> .../bindings/display/renesas,rzg2l-du.yaml | 124 ++++++++++++++++++
> 1 file changed, 124 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml
>
> diff --git a/Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml b/Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml
> new file mode 100644
> index 000000000000..ab99e7d57a7d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml
> @@ -0,0 +1,124 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/renesas,rzg2l-du.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Renesas RZ/G2L Display Unit (DU)
> +
> +maintainers:
> + - Biju Das <biju.das.jz@bp.renesas.com>
> + - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> +
> +description: |
> + These DT bindings describe the Display Unit embedded in the Renesas RZ/G2L
> + and RZ/V2L SoCs.
> +
> +properties:
> + compatible:
> + enum:
> + - renesas,r9a07g044-du # RZ/G2{L,LC}
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + clocks:
> + items:
> + - description: Main clock
> + - description: Register access clock
> + - description: Video clock
> +
> + clock-names:
> + items:
> + - const: aclk
> + - const: pclk
> + - const: vclk
> +
> + resets:
> + maxItems: 1
> +
> + power-domains:
> + maxItems: 1
> +
> + ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> + description: |
> + The connections to the DU output video ports are modeled using the OF
> + graph bindings specified in Documentation/devicetree/bindings/graph.txt.
The file has moved to graph.yaml in the dt-schema repo. I'll drop the
last part of the sentence, starting with "specified by".
> + The number of ports and their assignment are model-dependent. Each port
> + shall have a single endpoint.
> +
> + patternProperties:
> + "^port@[0-1]$":
> + $ref: /schemas/graph.yaml#/properties/port
> + unevaluatedProperties: false
> +
> + required:
> + - port@0
> +
> + unevaluatedProperties: false
> +
> + renesas,vsps:
> + $ref: "/schemas/types.yaml#/definitions/phandle-array"
> + items:
> + items:
> + - description: phandle to VSP instance that serves the DU channel
> + - description: Channel index identifying the LIF instance in that VSP
> + description:
> + A list of phandle and channel index tuples to the VSPs that handle the
> + memory interfaces for the DU channels.
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - clocks
> + - clock-names
> + - resets
> + - power-domains
> + - ports
> + - renesas,vsps
> +
> +additionalProperties: false
> +
> +examples:
> + # RZ/G2L DU
> + - |
> + #include <dt-bindings/clock/r9a07g044-cpg.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> + display@10890000 {
> + compatible = "renesas,r9a07g044-du";
> + reg = <0x10890000 0x10000>;
> + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cpg CPG_MOD R9A07G044_LCDC_CLK_A>,
> + <&cpg CPG_MOD R9A07G044_LCDC_CLK_P>,
> + <&cpg CPG_MOD R9A07G044_LCDC_CLK_D>;
> + clock-names = "aclk", "pclk", "vclk";
> + resets = <&cpg R9A07G044_LCDC_RESET_N>;
> + power-domains = <&cpg>;
> +
> + renesas,vsps = <&vspd0 0>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + endpoint {
> + remote-endpoint = <&dsi0_in>;
> + };
> + };
> + port@1 {
> + reg = <1>;
> + endpoint {
> + };
Endpoints shouldn't be empty, you can just drop the endpoint here.
I'll fix all this locally.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> + };
> + };
> + };
> +
> +...
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 20+ messages in thread
* RE: [PATCH v9 RESEND 2/5] dt-bindings: display: Document Renesas RZ/G2L DU bindings
2023-05-29 13:49 ` Laurent Pinchart
@ 2023-05-29 14:04 ` Biju Das
0 siblings, 0 replies; 20+ messages in thread
From: Biju Das @ 2023-05-29 14:04 UTC (permalink / raw)
To: Laurent Pinchart
Cc: David Airlie, Daniel Vetter, Rob Herring, Krzysztof Kozlowski,
dri-devel, linux-renesas-soc, devicetree, Geert Uytterhoeven,
Fabrizio Castro, Prabhakar Mahadev Lad, Rob Herring
Hi Laurent,
> Subject: Re: [PATCH v9 RESEND 2/5] dt-bindings: display: Document
> Renesas RZ/G2L DU bindings
>
> Hi Biju,
>
> Thank you for the patch.
>
> On Tue, May 02, 2023 at 11:09:09AM +0100, Biju Das wrote:
> > The RZ/G2L LCD controller is composed of Frame Compression Processor
> > (FCPVD), Video Signal Processor (VSPD), and Display Unit (DU).
> >
> > The DU module supports the following hardware features − Display
> > Parallel Interface (DPI) and MIPI LINK Video Interface − Display
> > timing master − Generates video timings − Selecting the polarity of
> > output DCLK, HSYNC, VSYNC, and DE − Supports Progressive − Input data
> > format (from VSPD): RGB888, RGB666 − Output data format: same as Input
> > data format − Supporting Full HD (1920 pixels x 1080 lines) for
> > MIPI-DSI Output − Supporting WXGA (1280 pixels x 800 lines) for
> > Parallel Output
> >
> > This patch document DU module found on RZ/G2L LCDC.
>
> s/document/documents the/
>
> > Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
> > Reviewed-by: Rob Herring <robh@kernel.org>
> > ---
> > v8->v9:
> > * No change
> > v7->v8:
> > * No change
> > v6->v7:
> > * No change
> > v5->v6:
> > * No change.
> > v4->v5:
> > * Added Rb tag from Rob.
> > v3->v4:
> > * Changed compatible name from
> > renesas,du-r9a07g044->renesas,r9a07g044-du
> > * started using same compatible for RZ/G2{L,LC}
> > v3: New patch
> > ---
> > .../bindings/display/renesas,rzg2l-du.yaml | 124
> ++++++++++++++++++
> > 1 file changed, 124 insertions(+)
> > create mode 100644
> > Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml
> >
> > diff --git
> > a/Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml
> > b/Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml
> > new file mode 100644
> > index 000000000000..ab99e7d57a7d
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml
> > @@ -0,0 +1,124 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2
> > +---
> > +$id:
> > +https://jpn01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevi
> > +cetree.org%2Fschemas%2Fdisplay%2Frenesas%2Crzg2l-du.yaml%23&data=05%7
> > +C01%7Cbiju.das.jz%40bp.renesas.com%7C60339e2c157d4b286c9908db604ba0b4
> > +%7C53d82571da1947e49cb4625a166a4a2a%7C0%7C0%7C638209650173950198%7CUn
> > +known%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1ha
> > +WwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=EpbJapOlYJybgJmDU%2FmMJZQ75vS
> > +F8v6GN5phXXl0%2FI0%3D&reserved=0
> > +$schema:
> > +https://jpn01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevi
> > +cetree.org%2Fmeta-schemas%2Fcore.yaml%23&data=05%7C01%7Cbiju.das.jz%4
> > +0bp.renesas.com%7C60339e2c157d4b286c9908db604ba0b4%7C53d82571da1947e4
> > +9cb4625a166a4a2a%7C0%7C0%7C638209650173950198%7CUnknown%7CTWFpbGZsb3d
> > +8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7
> > +C3000%7C%7C%7C&sdata=XRwCyvXbR274tkOBz6d3QGfmtILKEjgV5kfCk4LjrAM%3D&r
> > +eserved=0
> > +
> > +title: Renesas RZ/G2L Display Unit (DU)
> > +
> > +maintainers:
> > + - Biju Das <biju.das.jz@bp.renesas.com>
> > + - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> > +
> > +description: |
> > + These DT bindings describe the Display Unit embedded in the Renesas
> > +RZ/G2L
> > + and RZ/V2L SoCs.
> > +
> > +properties:
> > + compatible:
> > + enum:
> > + - renesas,r9a07g044-du # RZ/G2{L,LC}
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + interrupts:
> > + maxItems: 1
> > +
> > + clocks:
> > + items:
> > + - description: Main clock
> > + - description: Register access clock
> > + - description: Video clock
> > +
> > + clock-names:
> > + items:
> > + - const: aclk
> > + - const: pclk
> > + - const: vclk
> > +
> > + resets:
> > + maxItems: 1
> > +
> > + power-domains:
> > + maxItems: 1
> > +
> > + ports:
> > + $ref: /schemas/graph.yaml#/properties/ports
> > + description: |
> > + The connections to the DU output video ports are modeled using
> the OF
> > + graph bindings specified in
> Documentation/devicetree/bindings/graph.txt.
>
> The file has moved to graph.yaml in the dt-schema repo. I'll drop the
> last part of the sentence, starting with "specified by".
>
> > + The number of ports and their assignment are model-dependent.
> Each port
> > + shall have a single endpoint.
> > +
> > + patternProperties:
> > + "^port@[0-1]$":
> > + $ref: /schemas/graph.yaml#/properties/port
> > + unevaluatedProperties: false
> > +
> > + required:
> > + - port@0
> > +
> > + unevaluatedProperties: false
> > +
> > + renesas,vsps:
> > + $ref: "/schemas/types.yaml#/definitions/phandle-array"
> > + items:
> > + items:
> > + - description: phandle to VSP instance that serves the DU
> channel
> > + - description: Channel index identifying the LIF instance in
> that VSP
> > + description:
> > + A list of phandle and channel index tuples to the VSPs that
> handle the
> > + memory interfaces for the DU channels.
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - interrupts
> > + - clocks
> > + - clock-names
> > + - resets
> > + - power-domains
> > + - ports
> > + - renesas,vsps
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + # RZ/G2L DU
> > + - |
> > + #include <dt-bindings/clock/r9a07g044-cpg.h>
> > + #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +
> > + display@10890000 {
> > + compatible = "renesas,r9a07g044-du";
> > + reg = <0x10890000 0x10000>;
> > + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&cpg CPG_MOD R9A07G044_LCDC_CLK_A>,
> > + <&cpg CPG_MOD R9A07G044_LCDC_CLK_P>,
> > + <&cpg CPG_MOD R9A07G044_LCDC_CLK_D>;
> > + clock-names = "aclk", "pclk", "vclk";
> > + resets = <&cpg R9A07G044_LCDC_RESET_N>;
> > + power-domains = <&cpg>;
> > +
> > + renesas,vsps = <&vspd0 0>;
> > +
> > + ports {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + port@0 {
> > + reg = <0>;
> > + endpoint {
> > + remote-endpoint = <&dsi0_in>;
> > + };
> > + };
> > + port@1 {
> > + reg = <1>;
> > + endpoint {
> > + };
>
> Endpoints shouldn't be empty, you can just drop the endpoint here.
>
> I'll fix all this locally.
Thank you.
Cheers,
Biju
>
> Reviewed-by: Laurent Pinchart
> <laurent.pinchart+renesas@ideasonboard.com>
>
> > + };
> > + };
> > + };
> > +
> > +...
>
> --
> Regards,
>
> Laurent Pinchart
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v9 RESEND 0/5] Add RZ/{G2L,G2LC} and RZ/V2L Display Unit support
2023-05-25 14:30 ` Biju Das
@ 2023-05-29 14:13 ` Laurent Pinchart
2023-05-29 14:22 ` Biju Das
0 siblings, 1 reply; 20+ messages in thread
From: Laurent Pinchart @ 2023-05-29 14:13 UTC (permalink / raw)
To: Biju Das
Cc: David Airlie, Daniel Vetter, Philipp Zabel, Geert Uytterhoeven,
Kieran Bingham, dri-devel, linux-renesas-soc, Fabrizio Castro,
Prabhakar Mahadev Lad, linux-kernel
Hi Biju,
On Thu, May 25, 2023 at 02:30:10PM +0000, Biju Das wrote:
> Hi DRM maintainers,
>
> Gentle ping.
Sorry, I was on holidays the last two weeks.
> Are we happy with moving all Renesas drm drivers to Renesas specific
> directory or preference is for separate one??
This works for me.
> If it is later, I can send RZ/G2L drm driver separate.
>
> Otherwise, I need to rebase and resend.
Your series applies cleanly on top of the latest drm-next branch. Is
there a specific need to rebase and resend ?
I haven't had time to review patch 4/5 (the driver) yet. All the rest
looks good to me. Should I already include 1/5 in my next pull request ?
> Please let me know your preference.
>
> Cheers,
> Biju
>
>
> > -----Original Message-----
> > From: Biju Das
> > Sent: Monday, May 15, 2023 8:58 AM
> > To: David Airlie <airlied@gmail.com>; Daniel Vetter <daniel@ffwll.ch>;
> > Philipp Zabel <p.zabel@pengutronix.de>; Geert Uytterhoeven
> > <geert+renesas@glider.be>; Laurent Pinchart
> > <laurent.pinchart@ideasonboard.com>; Kieran Bingham
> > <kieran.bingham+renesas@ideasonboard.com>
> > Cc: dri-devel@lists.freedesktop.org; linux-renesas-soc@vger.kernel.org;
> > Fabrizio Castro <fabrizio.castro.jz@renesas.com>; Prabhakar Mahadev Lad
> > <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > Subject: RE: [PATCH v9 RESEND 0/5] Add RZ/{G2L,G2LC} and RZ/V2L Display
> > Unit support
> >
> > Hi All,
> >
> > Gentle ping. Are we happy with this patch series?
> >
> > Cheers,
> > Biju
> >
> > > Subject: [PATCH v9 RESEND 0/5] Add RZ/{G2L,G2LC} and RZ/V2L Display
> > > Unit support
> > >
> > > RZ/G2L LCD controller composed of Frame compression Processor(FCPVD),
> > > Video signal processor (VSPD) and Display unit(DU). The output of LCDC
> > > is connected to Display parallel interface and MIPI link video
> > > interface.
> > >
> > > The output from DSI is connected to ADV7535.
> > >
> > > Created a vendor specific directory renesas and moved all renesas drm
> > > drivers to it (rcar-du and shmobile). Then added support for RZ/G2L DU
> > > DRM driver by creating rz_du directory.
> > >
> > > Ref:
> > >
> > >
> > > v8->v9:
> > > * Added Rb tag from Laurent and Acked-by tag from Kieran for patch#1.
> > > * Added Rb tag from Laurent and Geert for patch#3.
> > > * Dropped reset_control_assert() from error patch for
> > > rzg2l_du_crtc_get() as
> > > suggested by Philipp Zabel.
> > > * Added Rb tag from Laurent oatch#5.
> > > * Updated MAINTAINERS entries for common parts(Makefile and Kconfig).
> > > v7->v8:
> > > * Moved rcar-du and shmobile DRM drivers to renesas specific vendor
> > > directory.
> > > * Fixed the typo vsp2->du in RZ/V2L DU bindings patch.
> > > * Added Rb tag from Rob for RZ/V2L DU bindings patch.
> > > * Dropped RCar du lib and created RZ/G2L DU DRM driver by creating
> > > rz_du folder.
> > > * Updated MAINTAINERS entries.
> > > v6->v7:
> > > * Split DU lib and RZ/G2L du driver as separate patch series as
> > > DU support added to more platforms based on RZ/G2L alike SoCs.
> > > * Rebased to latest drm-tip.
> > > * Added patch #2 for binding support for RZ/V2L DU
> > > * Added patch #4 for driver support for RZ/V2L DU
> > > * Added patch #5 for SoC DTSI support for RZ/G2L DU
> > > * Added patch #6 for SoC DTSI support for RZ/V2L DU
> > > * Added patch #7 for Enabling DU on SMARC EVK based on RZ/{G2L,V2L}
> > > SoCs.
> > > * Added patch #8 for Enabling DU on SMARC EVK based on RZ/G2LC SoC.
> > > v5->v6:
> > > * Merged DU lib and RZ/G2L du driver in same patch series
> > > * Rebased to latest drm-misc.
> > > * Merged patch#1 to RZ/G2L Driver patch.
> > > * Updated KConfig dependency from ARCH_RENESAS->ARCH_RZG2L.
> > > * Optimized rzg2l_du_output_name() by removing unsupported outputs.
> > >
> > > v4->v5:
> > > * Added Rb tag from Rob for binding patch.
> > > * Started using RCar DU libs(kms, vsp and encoder)
> > > * Started using rcar_du_device, rcar_du_write, rcar_du_crtc,
> > > rcar_du_format_info and rcar_du_encoder.
> > > v3->v4:
> > > * Changed compatible name from
> > > renesas,du-r9a07g044->renesas,r9a07g044-
> > > du
> > > * started using same compatible for RZ/G2{L,LC}
> > > * Removed rzg2l_du_group.h and struct rzg2l_du_group
> > > * Renamed __rzg2l_du_group_start_stop->rzg2l_du_start_stop
> > > * Removed rzg2l_du_group_restart
> > > * Updated rzg2l_du_crtc_set_display_timing
> > > * Removed mode_valid callback.
> > > * Updated rzg2l_du_crtc_create() parameters
> > > * Updated compatible
> > > * Removed RZG2L_DU_MAX_GROUPS
> > > V2->v3:
> > > * Added new bindings for RZ/G2L DU
> > > * Removed indirection and created new DRM driver based on R-Car DU
> > > v1->v2:
> > > * Based on [1], all references to 'rzg2l_lcdc' replaced with
> > 'rzg2l_du'
> > > * Updated commit description for bindings
> > > * Removed LCDC references from bindings
> > > * Changed clock name from du.0->aclk from bindings
> > > * Changed reset name from du.0->du from bindings
> > > * Replaced crtc_helper_funcs->rcar_crtc_helper_funcs
> > > * Updated macro DRM_RZG2L_LCDC->DRM_RZG2L_DU
> > > * Replaced rzg2l-lcdc-drm->rzg2l-du-drm
> > > * Added forward declaration for struct reset_control
> > >
> > > [1]
> > >
> > > Biju Das (5):
> > > drm: Place Renesas drivers in a separate dir
> > > dt-bindings: display: Document Renesas RZ/G2L DU bindings
> > > dt-bindings: display: renesas,rzg2l-du: Document RZ/V2L DU bindings
> > > drm: Add RZ/G2L DU Support
> > > MAINTAINERS: Add maintainer for RZ DU drivers
> > >
> > > .../bindings/display/renesas,rzg2l-du.yaml | 129 +++
> > > MAINTAINERS | 16 +-
> > > drivers/gpu/drm/Kconfig | 4 +-
> > > drivers/gpu/drm/Makefile | 3 +-
> > > drivers/gpu/drm/renesas/Kconfig | 5 +
> > > drivers/gpu/drm/renesas/Makefile | 5 +
> > > drivers/gpu/drm/{ => renesas}/rcar-du/Kconfig | 0
> > > .../gpu/drm/{ => renesas}/rcar-du/Makefile | 0
> > > .../gpu/drm/{ => renesas}/rcar-du/rcar_cmm.c | 0
> > > .../gpu/drm/{ => renesas}/rcar-du/rcar_cmm.h | 0
> > > .../drm/{ => renesas}/rcar-du/rcar_du_crtc.c | 0
> > > .../drm/{ => renesas}/rcar-du/rcar_du_crtc.h | 0
> > > .../drm/{ => renesas}/rcar-du/rcar_du_drv.c | 0
> > > .../drm/{ => renesas}/rcar-du/rcar_du_drv.h | 0
> > > .../{ => renesas}/rcar-du/rcar_du_encoder.c | 0
> > > .../{ => renesas}/rcar-du/rcar_du_encoder.h | 0
> > > .../drm/{ => renesas}/rcar-du/rcar_du_group.c | 0
> > > .../drm/{ => renesas}/rcar-du/rcar_du_group.h | 0
> > > .../drm/{ => renesas}/rcar-du/rcar_du_kms.c | 0
> > > .../drm/{ => renesas}/rcar-du/rcar_du_kms.h | 0
> > > .../drm/{ => renesas}/rcar-du/rcar_du_plane.c | 0
> > > .../drm/{ => renesas}/rcar-du/rcar_du_plane.h | 0
> > > .../drm/{ => renesas}/rcar-du/rcar_du_regs.h | 0
> > > .../drm/{ => renesas}/rcar-du/rcar_du_vsp.c | 0
> > > .../drm/{ => renesas}/rcar-du/rcar_du_vsp.h | 0
> > > .../{ => renesas}/rcar-du/rcar_du_writeback.c | 0
> > > .../{ => renesas}/rcar-du/rcar_du_writeback.h | 0
> > > .../drm/{ => renesas}/rcar-du/rcar_dw_hdmi.c | 0
> > > .../gpu/drm/{ => renesas}/rcar-du/rcar_lvds.c | 0
> > > .../gpu/drm/{ => renesas}/rcar-du/rcar_lvds.h | 0
> > > .../{ => renesas}/rcar-du/rcar_lvds_regs.h | 0
> > > .../drm/{ => renesas}/rcar-du/rcar_mipi_dsi.c | 0
> > > .../drm/{ => renesas}/rcar-du/rcar_mipi_dsi.h | 0
> > > .../rcar-du/rcar_mipi_dsi_regs.h | 0
> > > .../{ => renesas}/rcar-du/rzg2l_mipi_dsi.c | 0
> > > .../rcar-du/rzg2l_mipi_dsi_regs.h | 0
> > > drivers/gpu/drm/renesas/rz-du/Kconfig | 20 +
> > > drivers/gpu/drm/renesas/rz-du/Makefile | 8 +
> > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c | 714 ++++++++++++++++
> > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.h | 99 +++
> > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c | 188 +++++
> > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h | 89 ++
> > > .../gpu/drm/renesas/rz-du/rzg2l_du_encoder.c | 112 +++
> > > .../gpu/drm/renesas/rz-du/rzg2l_du_encoder.h | 28 +
> > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.c | 770 ++++++++++++++++++
> > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.h | 43 +
> > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_regs.h | 67 ++
> > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.c | 430 ++++++++++
> > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.h | 94 +++
> > > .../gpu/drm/{ => renesas}/shmobile/Kconfig | 0
> > > .../gpu/drm/{ => renesas}/shmobile/Makefile | 0
> > > .../shmobile/shmob_drm_backlight.c | 0
> > > .../shmobile/shmob_drm_backlight.h | 0
> > > .../{ => renesas}/shmobile/shmob_drm_crtc.c | 0
> > > .../{ => renesas}/shmobile/shmob_drm_crtc.h | 0
> > > .../{ => renesas}/shmobile/shmob_drm_drv.c | 0
> > > .../{ => renesas}/shmobile/shmob_drm_drv.h | 0
> > > .../{ => renesas}/shmobile/shmob_drm_kms.c | 0
> > > .../{ => renesas}/shmobile/shmob_drm_kms.h | 0
> > > .../{ => renesas}/shmobile/shmob_drm_plane.c | 0
> > > .../{ => renesas}/shmobile/shmob_drm_plane.h | 0
> > > .../{ => renesas}/shmobile/shmob_drm_regs.h | 0
> > > 62 files changed, 2816 insertions(+), 8 deletions(-) create mode
> > > 100644 Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml
> > > create mode 100644 drivers/gpu/drm/renesas/Kconfig create mode
> > > 100644 drivers/gpu/drm/renesas/Makefile rename drivers/gpu/drm/{ =>
> > > renesas}/rcar-du/Kconfig (100%) rename drivers/gpu/drm/{ =>
> > > renesas}/rcar-du/Makefile (100%) rename drivers/gpu/drm/{ =>
> > > renesas}/rcar-du/rcar_cmm.c (100%) rename drivers/gpu/drm/{ =>
> > > renesas}/rcar-du/rcar_cmm.h (100%) rename drivers/gpu/drm/{ =>
> > > renesas}/rcar-du/rcar_du_crtc.c (100%) rename drivers/gpu/drm/{ =>
> > > renesas}/rcar-du/rcar_du_crtc.h (100%) rename drivers/gpu/drm/{ =>
> > > renesas}/rcar-du/rcar_du_drv.c (100%) rename drivers/gpu/drm/{ =>
> > > renesas}/rcar-du/rcar_du_drv.h (100%) rename drivers/gpu/drm/{ =>
> > > renesas}/rcar-du/rcar_du_encoder.c (100%) rename drivers/gpu/drm/{ =>
> > > renesas}/rcar-du/rcar_du_encoder.h (100%) rename drivers/gpu/drm/{ =>
> > > renesas}/rcar-du/rcar_du_group.c (100%) rename drivers/gpu/drm/{ =>
> > > renesas}/rcar-du/rcar_du_group.h (100%) rename drivers/gpu/drm/{ =>
> > > renesas}/rcar-du/rcar_du_kms.c (100%) rename drivers/gpu/drm/{ =>
> > > renesas}/rcar-du/rcar_du_kms.h (100%) rename drivers/gpu/drm/{ =>
> > > renesas}/rcar-du/rcar_du_plane.c (100%) rename drivers/gpu/drm/{ =>
> > > renesas}/rcar-du/rcar_du_plane.h (100%) rename drivers/gpu/drm/{ =>
> > > renesas}/rcar-du/rcar_du_regs.h (100%) rename drivers/gpu/drm/{ =>
> > > renesas}/rcar-du/rcar_du_vsp.c (100%) rename drivers/gpu/drm/{ =>
> > > renesas}/rcar-du/rcar_du_vsp.h (100%) rename drivers/gpu/drm/{ =>
> > > renesas}/rcar-du/rcar_du_writeback.c (100%) rename drivers/gpu/drm/{
> > > => renesas}/rcar-du/rcar_du_writeback.h (100%) rename
> > > drivers/gpu/drm/{ => renesas}/rcar-du/rcar_dw_hdmi.c (100%) rename
> > > drivers/gpu/drm/{ => renesas}/rcar-du/rcar_lvds.c (100%) rename
> > > drivers/gpu/drm/{ => renesas}/rcar-du/rcar_lvds.h (100%) rename
> > > drivers/gpu/drm/{ => renesas}/rcar-du/rcar_lvds_regs.h (100%) rename
> > > drivers/gpu/drm/{ => renesas}/rcar-du/rcar_mipi_dsi.c (100%) rename
> > > drivers/gpu/drm/{ => renesas}/rcar-du/rcar_mipi_dsi.h (100%) rename
> > > drivers/gpu/drm/{ => renesas}/rcar-du/rcar_mipi_dsi_regs.h (100%)
> > > rename drivers/gpu/drm/{ => renesas}/rcar-du/rzg2l_mipi_dsi.c (100%)
> > > rename drivers/gpu/drm/{ => renesas}/rcar-du/rzg2l_mipi_dsi_regs.h
> > > (100%) create mode 100644 drivers/gpu/drm/renesas/rz-du/Kconfig
> > > create mode 100644 drivers/gpu/drm/renesas/rz-du/Makefile
> > > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c
> > > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.h
> > > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c
> > > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h
> > > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.c
> > > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.h
> > > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.c
> > > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.h
> > > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_regs.h
> > > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.c
> > > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.h
> > > rename drivers/gpu/drm/{ => renesas}/shmobile/Kconfig (100%) rename
> > > drivers/gpu/drm/{ => renesas}/shmobile/Makefile (100%) rename
> > > drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_backlight.c (100%)
> > > rename drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_backlight.h
> > > (100%) rename drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_crtc.c
> > > (100%) rename drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_crtc.h
> > > (100%) rename drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_drv.c
> > > (100%) rename drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_drv.h
> > > (100%) rename drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_kms.c
> > > (100%) rename drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_kms.h
> > > (100%) rename drivers/gpu/drm/{ =>
> > > renesas}/shmobile/shmob_drm_plane.c
> > > (100%) rename drivers/gpu/drm/{ =>
> > > renesas}/shmobile/shmob_drm_plane.h
> > > (100%) rename drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_regs.h
> > > (100%)
> > >
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 20+ messages in thread
* RE: [PATCH v9 RESEND 0/5] Add RZ/{G2L,G2LC} and RZ/V2L Display Unit support
2023-05-29 14:13 ` Laurent Pinchart
@ 2023-05-29 14:22 ` Biju Das
2023-05-29 15:45 ` Laurent Pinchart
0 siblings, 1 reply; 20+ messages in thread
From: Biju Das @ 2023-05-29 14:22 UTC (permalink / raw)
To: Laurent Pinchart
Cc: David Airlie, Daniel Vetter, Philipp Zabel, Geert Uytterhoeven,
Kieran Bingham, dri-devel, linux-renesas-soc, Fabrizio Castro,
Prabhakar Mahadev Lad, linux-kernel
HI Laurent,
Thanks for the feedback.
> Subject: Re: [PATCH v9 RESEND 0/5] Add RZ/{G2L,G2LC} and RZ/V2L Display
> Unit support
>
> Hi Biju,
>
> On Thu, May 25, 2023 at 02:30:10PM +0000, Biju Das wrote:
> > Hi DRM maintainers,
> >
> > Gentle ping.
>
> Sorry, I was on holidays the last two weeks.
>
> > Are we happy with moving all Renesas drm drivers to Renesas specific
> > directory or preference is for separate one??
>
> This works for me.
>
> > If it is later, I can send RZ/G2L drm driver separate.
> >
> > Otherwise, I need to rebase and resend.
>
> Your series applies cleanly on top of the latest drm-next branch. Is
> there a specific need to rebase and resend ?
Nope. After my patch series there were
some patches from Geert for drm/shmobile merged to drm-misc-next by Thomas.
Maybe git managed this automatically??
>
> I haven't had time to review patch 4/5 (the driver) yet. All the rest
> looks good to me. Should I already include 1/5 in my next pull request ?
Yes, please.
Cheers,
Biju
>
> > Please let me know your preference.
> >
> > Cheers,
> > Biju
> >
> >
> > > -----Original Message-----
> > > From: Biju Das
> > > Sent: Monday, May 15, 2023 8:58 AM
> > > To: David Airlie <airlied@gmail.com>; Daniel Vetter
> > > <daniel@ffwll.ch>; Philipp Zabel <p.zabel@pengutronix.de>; Geert
> > > Uytterhoeven <geert+renesas@glider.be>; Laurent Pinchart
> > > <laurent.pinchart@ideasonboard.com>; Kieran Bingham
> > > <kieran.bingham+renesas@ideasonboard.com>
> > > Cc: dri-devel@lists.freedesktop.org;
> > > linux-renesas-soc@vger.kernel.org;
> > > Fabrizio Castro <fabrizio.castro.jz@renesas.com>; Prabhakar Mahadev
> > > Lad <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > > Subject: RE: [PATCH v9 RESEND 0/5] Add RZ/{G2L,G2LC} and RZ/V2L
> > > Display Unit support
> > >
> > > Hi All,
> > >
> > > Gentle ping. Are we happy with this patch series?
> > >
> > > Cheers,
> > > Biju
> > >
> > > > Subject: [PATCH v9 RESEND 0/5] Add RZ/{G2L,G2LC} and RZ/V2L
> > > > Display Unit support
> > > >
> > > > RZ/G2L LCD controller composed of Frame compression
> > > > Processor(FCPVD), Video signal processor (VSPD) and Display
> > > > unit(DU). The output of LCDC is connected to Display parallel
> > > > interface and MIPI link video interface.
> > > >
> > > > The output from DSI is connected to ADV7535.
> > > >
> > > > Created a vendor specific directory renesas and moved all renesas
> > > > drm drivers to it (rcar-du and shmobile). Then added support for
> > > > RZ/G2L DU DRM driver by creating rz_du directory.
> > > >
> > > > Ref:
> > > >
> > > >
> > > > v8->v9:
> > > > * Added Rb tag from Laurent and Acked-by tag from Kieran for
> patch#1.
> > > > * Added Rb tag from Laurent and Geert for patch#3.
> > > > * Dropped reset_control_assert() from error patch for
> > > > rzg2l_du_crtc_get() as
> > > > suggested by Philipp Zabel.
> > > > * Added Rb tag from Laurent oatch#5.
> > > > * Updated MAINTAINERS entries for common parts(Makefile and
> Kconfig).
> > > > v7->v8:
> > > > * Moved rcar-du and shmobile DRM drivers to renesas specific
> > > > vendor directory.
> > > > * Fixed the typo vsp2->du in RZ/V2L DU bindings patch.
> > > > * Added Rb tag from Rob for RZ/V2L DU bindings patch.
> > > > * Dropped RCar du lib and created RZ/G2L DU DRM driver by
> > > > creating rz_du folder.
> > > > * Updated MAINTAINERS entries.
> > > > v6->v7:
> > > > * Split DU lib and RZ/G2L du driver as separate patch series as
> > > > DU support added to more platforms based on RZ/G2L alike SoCs.
> > > > * Rebased to latest drm-tip.
> > > > * Added patch #2 for binding support for RZ/V2L DU
> > > > * Added patch #4 for driver support for RZ/V2L DU
> > > > * Added patch #5 for SoC DTSI support for RZ/G2L DU
> > > > * Added patch #6 for SoC DTSI support for RZ/V2L DU
> > > > * Added patch #7 for Enabling DU on SMARC EVK based on
> > > > RZ/{G2L,V2L} SoCs.
> > > > * Added patch #8 for Enabling DU on SMARC EVK based on RZ/G2LC
> SoC.
> > > > v5->v6:
> > > > * Merged DU lib and RZ/G2L du driver in same patch series
> > > > * Rebased to latest drm-misc.
> > > > * Merged patch#1 to RZ/G2L Driver patch.
> > > > * Updated KConfig dependency from ARCH_RENESAS->ARCH_RZG2L.
> > > > * Optimized rzg2l_du_output_name() by removing unsupported
> outputs.
> > > >
> > > > v4->v5:
> > > > * Added Rb tag from Rob for binding patch.
> > > > * Started using RCar DU libs(kms, vsp and encoder)
> > > > * Started using rcar_du_device, rcar_du_write, rcar_du_crtc,
> > > > rcar_du_format_info and rcar_du_encoder.
> > > > v3->v4:
> > > > * Changed compatible name from
> > > > renesas,du-r9a07g044->renesas,r9a07g044-
> > > > du
> > > > * started using same compatible for RZ/G2{L,LC}
> > > > * Removed rzg2l_du_group.h and struct rzg2l_du_group
> > > > * Renamed __rzg2l_du_group_start_stop->rzg2l_du_start_stop
> > > > * Removed rzg2l_du_group_restart
> > > > * Updated rzg2l_du_crtc_set_display_timing
> > > > * Removed mode_valid callback.
> > > > * Updated rzg2l_du_crtc_create() parameters
> > > > * Updated compatible
> > > > * Removed RZG2L_DU_MAX_GROUPS
> > > > V2->v3:
> > > > * Added new bindings for RZ/G2L DU
> > > > * Removed indirection and created new DRM driver based on R-Car
> > > > DU
> > > > v1->v2:
> > > > * Based on [1], all references to 'rzg2l_lcdc' replaced with
> > > 'rzg2l_du'
> > > > * Updated commit description for bindings
> > > > * Removed LCDC references from bindings
> > > > * Changed clock name from du.0->aclk from bindings
> > > > * Changed reset name from du.0->du from bindings
> > > > * Replaced crtc_helper_funcs->rcar_crtc_helper_funcs
> > > > * Updated macro DRM_RZG2L_LCDC->DRM_RZG2L_DU
> > > > * Replaced rzg2l-lcdc-drm->rzg2l-du-drm
> > > > * Added forward declaration for struct reset_control
> > > >
> > > > [1]
> > > >
> > > > Biju Das (5):
> > > > drm: Place Renesas drivers in a separate dir
> > > > dt-bindings: display: Document Renesas RZ/G2L DU bindings
> > > > dt-bindings: display: renesas,rzg2l-du: Document RZ/V2L DU
> bindings
> > > > drm: Add RZ/G2L DU Support
> > > > MAINTAINERS: Add maintainer for RZ DU drivers
> > > >
> > > > .../bindings/display/renesas,rzg2l-du.yaml | 129 +++
> > > > MAINTAINERS | 16 +-
> > > > drivers/gpu/drm/Kconfig | 4 +-
> > > > drivers/gpu/drm/Makefile | 3 +-
> > > > drivers/gpu/drm/renesas/Kconfig | 5 +
> > > > drivers/gpu/drm/renesas/Makefile | 5 +
> > > > drivers/gpu/drm/{ => renesas}/rcar-du/Kconfig | 0
> > > > .../gpu/drm/{ => renesas}/rcar-du/Makefile | 0
> > > > .../gpu/drm/{ => renesas}/rcar-du/rcar_cmm.c | 0
> > > > .../gpu/drm/{ => renesas}/rcar-du/rcar_cmm.h | 0
> > > > .../drm/{ => renesas}/rcar-du/rcar_du_crtc.c | 0
> > > > .../drm/{ => renesas}/rcar-du/rcar_du_crtc.h | 0
> > > > .../drm/{ => renesas}/rcar-du/rcar_du_drv.c | 0
> > > > .../drm/{ => renesas}/rcar-du/rcar_du_drv.h | 0
> > > > .../{ => renesas}/rcar-du/rcar_du_encoder.c | 0
> > > > .../{ => renesas}/rcar-du/rcar_du_encoder.h | 0
> > > > .../drm/{ => renesas}/rcar-du/rcar_du_group.c | 0
> > > > .../drm/{ => renesas}/rcar-du/rcar_du_group.h | 0
> > > > .../drm/{ => renesas}/rcar-du/rcar_du_kms.c | 0
> > > > .../drm/{ => renesas}/rcar-du/rcar_du_kms.h | 0
> > > > .../drm/{ => renesas}/rcar-du/rcar_du_plane.c | 0
> > > > .../drm/{ => renesas}/rcar-du/rcar_du_plane.h | 0
> > > > .../drm/{ => renesas}/rcar-du/rcar_du_regs.h | 0
> > > > .../drm/{ => renesas}/rcar-du/rcar_du_vsp.c | 0
> > > > .../drm/{ => renesas}/rcar-du/rcar_du_vsp.h | 0
> > > > .../{ => renesas}/rcar-du/rcar_du_writeback.c | 0
> > > > .../{ => renesas}/rcar-du/rcar_du_writeback.h | 0
> > > > .../drm/{ => renesas}/rcar-du/rcar_dw_hdmi.c | 0
> > > > .../gpu/drm/{ => renesas}/rcar-du/rcar_lvds.c | 0
> > > > .../gpu/drm/{ => renesas}/rcar-du/rcar_lvds.h | 0
> > > > .../{ => renesas}/rcar-du/rcar_lvds_regs.h | 0
> > > > .../drm/{ => renesas}/rcar-du/rcar_mipi_dsi.c | 0
> > > > .../drm/{ => renesas}/rcar-du/rcar_mipi_dsi.h | 0
> > > > .../rcar-du/rcar_mipi_dsi_regs.h | 0
> > > > .../{ => renesas}/rcar-du/rzg2l_mipi_dsi.c | 0
> > > > .../rcar-du/rzg2l_mipi_dsi_regs.h | 0
> > > > drivers/gpu/drm/renesas/rz-du/Kconfig | 20 +
> > > > drivers/gpu/drm/renesas/rz-du/Makefile | 8 +
> > > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c | 714
> > > > ++++++++++++++++ drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.h |
> > > > 99 +++ drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c | 188 +++++
> > > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h | 89 ++
> > > > .../gpu/drm/renesas/rz-du/rzg2l_du_encoder.c | 112 +++
> > > > .../gpu/drm/renesas/rz-du/rzg2l_du_encoder.h | 28 +
> > > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.c | 770
> > > > ++++++++++++++++++ drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.h |
> > > > 43 + drivers/gpu/drm/renesas/rz-du/rzg2l_du_regs.h | 67 ++
> > > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.c | 430 ++++++++++
> > > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.h | 94 +++
> > > > .../gpu/drm/{ => renesas}/shmobile/Kconfig | 0
> > > > .../gpu/drm/{ => renesas}/shmobile/Makefile | 0
> > > > .../shmobile/shmob_drm_backlight.c | 0
> > > > .../shmobile/shmob_drm_backlight.h | 0
> > > > .../{ => renesas}/shmobile/shmob_drm_crtc.c | 0
> > > > .../{ => renesas}/shmobile/shmob_drm_crtc.h | 0
> > > > .../{ => renesas}/shmobile/shmob_drm_drv.c | 0
> > > > .../{ => renesas}/shmobile/shmob_drm_drv.h | 0
> > > > .../{ => renesas}/shmobile/shmob_drm_kms.c | 0
> > > > .../{ => renesas}/shmobile/shmob_drm_kms.h | 0
> > > > .../{ => renesas}/shmobile/shmob_drm_plane.c | 0
> > > > .../{ => renesas}/shmobile/shmob_drm_plane.h | 0
> > > > .../{ => renesas}/shmobile/shmob_drm_regs.h | 0
> > > > 62 files changed, 2816 insertions(+), 8 deletions(-) create mode
> > > > 100644
> > > > Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml
> > > > create mode 100644 drivers/gpu/drm/renesas/Kconfig create mode
> > > > 100644 drivers/gpu/drm/renesas/Makefile rename drivers/gpu/drm/{
> > > > => renesas}/rcar-du/Kconfig (100%) rename drivers/gpu/drm/{ =>
> > > > renesas}/rcar-du/Makefile (100%) rename drivers/gpu/drm/{ =>
> > > > renesas}/rcar-du/rcar_cmm.c (100%) rename drivers/gpu/drm/{ =>
> > > > renesas}/rcar-du/rcar_cmm.h (100%) rename drivers/gpu/drm/{ =>
> > > > renesas}/rcar-du/rcar_du_crtc.c (100%) rename drivers/gpu/drm/{
> > > > => renesas}/rcar-du/rcar_du_crtc.h (100%) rename
> > > > drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_drv.c (100%) rename
> > > > drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_drv.h (100%) rename
> > > > drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_encoder.c (100%)
> > > > rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_encoder.h
> > > > (100%) rename drivers/gpu/drm/{ =>
> > > > renesas}/rcar-du/rcar_du_group.c (100%) rename drivers/gpu/drm/{
> > > > => renesas}/rcar-du/rcar_du_group.h (100%) rename
> > > > drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_kms.c (100%) rename
> > > > drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_kms.h (100%) rename
> > > > drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_plane.c (100%)
> > > > rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_plane.h
> > > > (100%) rename drivers/gpu/drm/{ =>
> > > > renesas}/rcar-du/rcar_du_regs.h (100%) rename drivers/gpu/drm/{
> > > > => renesas}/rcar-du/rcar_du_vsp.c (100%) rename drivers/gpu/drm/{
> > > > => renesas}/rcar-du/rcar_du_vsp.h (100%) rename drivers/gpu/drm/{
> > > > => renesas}/rcar-du/rcar_du_writeback.c (100%) rename
> > > > drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_writeback.h (100%)
> > > > rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_dw_hdmi.c (100%)
> > > > rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_lvds.c (100%)
> > > > rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_lvds.h (100%)
> > > > rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_lvds_regs.h
> > > > (100%) rename drivers/gpu/drm/{ =>
> > > > renesas}/rcar-du/rcar_mipi_dsi.c (100%) rename drivers/gpu/drm/{
> > > > => renesas}/rcar-du/rcar_mipi_dsi.h (100%) rename
> > > > drivers/gpu/drm/{ => renesas}/rcar-du/rcar_mipi_dsi_regs.h (100%)
> > > > rename drivers/gpu/drm/{ => renesas}/rcar-du/rzg2l_mipi_dsi.c
> > > > (100%) rename drivers/gpu/drm/{ =>
> > > > renesas}/rcar-du/rzg2l_mipi_dsi_regs.h
> > > > (100%) create mode 100644 drivers/gpu/drm/renesas/rz-du/Kconfig
> > > > create mode 100644 drivers/gpu/drm/renesas/rz-du/Makefile
> > > > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c
> > > > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.h
> > > > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c
> > > > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h
> > > > create mode 100644
> > > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.c
> > > > create mode 100644
> > > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.h
> > > > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.c
> > > > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.h
> > > > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_regs.h
> > > > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.c
> > > > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.h
> > > > rename drivers/gpu/drm/{ => renesas}/shmobile/Kconfig (100%)
> > > > rename drivers/gpu/drm/{ => renesas}/shmobile/Makefile (100%)
> > > > rename drivers/gpu/drm/{ =>
> > > > renesas}/shmobile/shmob_drm_backlight.c (100%) rename
> > > > drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_backlight.h
> > > > (100%) rename drivers/gpu/drm/{ =>
> > > > renesas}/shmobile/shmob_drm_crtc.c
> > > > (100%) rename drivers/gpu/drm/{ =>
> > > > renesas}/shmobile/shmob_drm_crtc.h
> > > > (100%) rename drivers/gpu/drm/{ =>
> > > > renesas}/shmobile/shmob_drm_drv.c
> > > > (100%) rename drivers/gpu/drm/{ =>
> > > > renesas}/shmobile/shmob_drm_drv.h
> > > > (100%) rename drivers/gpu/drm/{ =>
> > > > renesas}/shmobile/shmob_drm_kms.c
> > > > (100%) rename drivers/gpu/drm/{ =>
> > > > renesas}/shmobile/shmob_drm_kms.h
> > > > (100%) rename drivers/gpu/drm/{ =>
> > > > renesas}/shmobile/shmob_drm_plane.c
> > > > (100%) rename drivers/gpu/drm/{ =>
> > > > renesas}/shmobile/shmob_drm_plane.h
> > > > (100%) rename drivers/gpu/drm/{ =>
> > > > renesas}/shmobile/shmob_drm_regs.h
> > > > (100%)
> > > >
>
> --
> Regards,
>
> Laurent Pinchart
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v9 RESEND 4/5] drm: Add RZ/G2L DU Support
2023-05-02 10:09 ` [PATCH v9 RESEND 4/5] drm: Add RZ/G2L DU Support Biju Das
@ 2023-05-29 15:43 ` Laurent Pinchart
2023-06-01 12:08 ` Biju Das
0 siblings, 1 reply; 20+ messages in thread
From: Laurent Pinchart @ 2023-05-29 15:43 UTC (permalink / raw)
To: Biju Das
Cc: David Airlie, Daniel Vetter, Philipp Zabel, Kieran Bingham,
dri-devel, linux-renesas-soc, Geert Uytterhoeven,
Fabrizio Castro, Prabhakar Mahadev Lad
Hi Biju,
Thank you for the patch.
This is a partial review, because the driver is big, and because some
changes in v10 will (hopefully) simplify the code and make review
easier.
On Tue, May 02, 2023 at 11:09:11AM +0100, Biju Das wrote:
> The LCD controller is composed of Frame Compression Processor (FCPVD),
> Video Signal Processor (VSPD), and Display Unit (DU).
>
> It has DPI/DSI interfaces and supports a maximum resolution of 1080p
> along with 2 RPFs to support the blending of two picture layers and
> raster operations (ROPs).
>
> The DU module is connected to VSPD. Add RZ/G2L DU support for RZ/G2L
> alike SoCs.
>
> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
> ---
> Ref:
> https://lore.kernel.org/linux-renesas-soc/OS0PR01MB5922717E4CCFE07F3C25FBC986989@OS0PR01MB5922.jpnprd01.prod.outlook.com/#t
> v8->v9:
> * Dropped reset_control_assert() from error patch for rzg2l_du_crtc_get() as
> suggested by Philipp Zabel.
> v7->v8:
> * Dropped RCar du lib and created RZ/G2L DU DRM driver by creating rz_du folder.
> * Updated KConfig and Makefile.
> v6->v7:
> * Split DU lib and RZ/G2L du driver as separate patch series as
> DU support added to more platforms based on RZ/G2L alike SoCs.
> * Rebased to latest drm-tip.
> * Added patch #2 for binding support for RZ/V2L DU
> * Added patch #4 for driver support for RZ/V2L DU
> * Added patch #5 for SoC DTSI support for RZ/G2L DU
> * Added patch #6 for SoC DTSI support for RZ/V2L DU
> * Added patch #7 for Enabling DU on SMARC EVK based on RZ/{G2L,V2L} SoCs.
> * Added patch #8 for Enabling DU on SMARC EVK based on RZ/G2LC SoC.
> ---
> drivers/gpu/drm/renesas/Kconfig | 1 +
> drivers/gpu/drm/renesas/Makefile | 1 +
> drivers/gpu/drm/renesas/rz-du/Kconfig | 20 +
> drivers/gpu/drm/renesas/rz-du/Makefile | 8 +
> drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c | 714 ++++++++++++++++
> drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.h | 99 +++
> drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c | 188 +++++
> drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h | 89 ++
> .../gpu/drm/renesas/rz-du/rzg2l_du_encoder.c | 112 +++
> .../gpu/drm/renesas/rz-du/rzg2l_du_encoder.h | 28 +
> drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.c | 770 ++++++++++++++++++
> drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.h | 43 +
> drivers/gpu/drm/renesas/rz-du/rzg2l_du_regs.h | 67 ++
> drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.c | 430 ++++++++++
> drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.h | 94 +++
> 15 files changed, 2664 insertions(+)
> create mode 100644 drivers/gpu/drm/renesas/rz-du/Kconfig
> create mode 100644 drivers/gpu/drm/renesas/rz-du/Makefile
> create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c
> create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.h
> create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c
> create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h
> create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.c
> create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.h
> create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.c
> create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.h
> create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_regs.h
> create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.c
> create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.h
>
> diff --git a/drivers/gpu/drm/renesas/Kconfig b/drivers/gpu/drm/renesas/Kconfig
> index 3777dad17f81..21862a8ef710 100644
> --- a/drivers/gpu/drm/renesas/Kconfig
> +++ b/drivers/gpu/drm/renesas/Kconfig
> @@ -1,4 +1,5 @@
> # SPDX-License-Identifier: GPL-2.0-only
>
> source "drivers/gpu/drm/renesas/rcar-du/Kconfig"
> +source "drivers/gpu/drm/renesas/rz-du/Kconfig"
> source "drivers/gpu/drm/renesas/shmobile/Kconfig"
> diff --git a/drivers/gpu/drm/renesas/Makefile b/drivers/gpu/drm/renesas/Makefile
> index ec0e89e7a592..b8d8bc53967f 100644
> --- a/drivers/gpu/drm/renesas/Makefile
> +++ b/drivers/gpu/drm/renesas/Makefile
> @@ -1,4 +1,5 @@
> # SPDX-License-Identifier: GPL-2.0
>
> obj-y += rcar-du/
> +obj-y += rz-du/
> obj-$(CONFIG_DRM_SHMOBILE) += shmobile/
> diff --git a/drivers/gpu/drm/renesas/rz-du/Kconfig b/drivers/gpu/drm/renesas/rz-du/Kconfig
> new file mode 100644
> index 000000000000..90b1bf72e23b
> --- /dev/null
> +++ b/drivers/gpu/drm/renesas/rz-du/Kconfig
> @@ -0,0 +1,20 @@
> +# SPDX-License-Identifier: GPL-2.0
> +config DRM_RZG2L_DU
> + tristate "DRM Support for RZ/G2L Display Unit"
> + depends on DRM && OF
> + depends on ARM64
Does the driver fail to compile on !ARM64 platforms ? If no, I'd drop
this.
> + depends on DRM_RCAR_VSP
> + depends on ARCH_RZG2L || COMPILE_TEST
> + select DRM_KMS_HELPER
> + select DRM_GEM_DMA_HELPER
Alphabetical order please.
> + select VIDEOMODE_HELPERS
> + help
> + Choose this option if you have an RZ/G2L alike chipset.
> + If M is selected the module will be called rzg2l-du-drm.
> +
> +config DRM_RCAR_VSP
> + bool "R-Car DU VSP Compositor Support" if ARM
> + default y if ARM64
> + depends on VIDEO_RENESAS_VSP1
> + help
> + Enable support to expose the R-Car VSP Compositor as KMS planes.
This duplicates the config symbol in
drivers/gpu/drm/renesas/rcar-du/Kconfig.
Unlike on R-Car, where some SoC generations can operate without the VSP,
RZ/G2L requires the VSP. You can drop this configuration option and just
make DRM_RZG2L_DU depend on VIDEO_RENESAS_VSP1.
> diff --git a/drivers/gpu/drm/renesas/rz-du/Makefile b/drivers/gpu/drm/renesas/rz-du/Makefile
> new file mode 100644
> index 000000000000..2cdf3ccd0459
> --- /dev/null
> +++ b/drivers/gpu/drm/renesas/rz-du/Makefile
> @@ -0,0 +1,8 @@
> +# SPDX-License-Identifier: GPL-2.0
> +rzg2l-du-drm-y := rzg2l_du_crtc.o \
> + rzg2l_du_drv.o \
> + rzg2l_du_encoder.o \
> + rzg2l_du_kms.o \
> +
> +rzg2l-du-drm-$(CONFIG_DRM_RCAR_VSP) += rzg2l_du_vsp.o
> +obj-$(CONFIG_DRM_RZG2L_DU) += rzg2l-du-drm.o
> diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c
> new file mode 100644
> index 000000000000..d61d433d72e6
> --- /dev/null
> +++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c
> @@ -0,0 +1,714 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * RZ/G2L Display Unit CRTCs
> + *
> + * Copyright (C) 2023 Renesas Electronics Corporation
> + *
> + * Based on rcar_du_crtc.c
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/mutex.h>
> +#include <linux/platform_device.h>
> +#include <linux/reset.h>
> +
> +#include <drm/drm_atomic.h>
> +#include <drm/drm_atomic_helper.h>
> +#include <drm/drm_bridge.h>
> +#include <drm/drm_crtc.h>
> +#include <drm/drm_device.h>
> +#include <drm/drm_framebuffer.h>
> +#include <drm/drm_gem_dma_helper.h>
> +#include <drm/drm_vblank.h>
> +
> +#include "rzg2l_du_crtc.h"
> +#include "rzg2l_du_drv.h"
> +#include "rzg2l_du_encoder.h"
> +#include "rzg2l_du_kms.h"
> +#include "rzg2l_du_vsp.h"
> +#include "rzg2l_du_regs.h"
> +
> +/* -----------------------------------------------------------------------------
> + * Hardware Setup
> + */
> +
> +static void rzg2l_du_crtc_set_display_timing(struct rzg2l_du_crtc *rcrtc)
> +{
> + const struct drm_display_mode *mode = &rcrtc->crtc.state->adjusted_mode;
> + struct rzg2l_du_device *rcdu = rcrtc->dev;
> + unsigned long mode_clock = mode->clock * 1000;
> + u32 ditr0, ditr1, ditr2, ditr3, ditr4, ditr5, pbcr0;
> + struct clk *parent_clk;
> +
> + parent_clk = clk_get_parent(rcrtc->rzg2l_clocks.dclk);
> + clk_set_rate(parent_clk, mode_clock);
Shouldn't the clock framework configure the parent correctly if you set
the dclk rate ?
> +
> + clk_prepare_enable(rcrtc->rzg2l_clocks.dclk);
> +
> + ditr0 = (DU_DITR0_DEMD_HIGH
> + | ((mode->flags & DRM_MODE_FLAG_PVSYNC) ? DU_DITR0_VSPOL : 0)
> + | ((mode->flags & DRM_MODE_FLAG_PHSYNC) ? DU_DITR0_HSPOL : 0));
No need for the outer parentheses.
I usually align the | under the =, but that's up to you.
> +
> + ditr1 = DU_DITR1_VSA(mode->vsync_end - mode->vsync_start)
> + | DU_DITR1_VACTIVE(mode->vdisplay);
> +
> + ditr2 = DU_DITR2_VBP(mode->vtotal - mode->vsync_end)
> + | DU_DITR2_VFP(mode->vsync_start - mode->vdisplay);
> +
> + ditr3 = DU_DITR3_HSA(mode->hsync_end - mode->hsync_start)
> + | DU_DITR3_HACTIVE(mode->hdisplay);
> +
> + ditr4 = DU_DITR4_HBP(mode->htotal - mode->hsync_end)
> + | DU_DITR4_HFP(mode->hsync_start - mode->hdisplay);
> +
> + ditr5 = DU_DITR5_VSFT(0) | DU_DITR5_HSFT(0);
> +
> + pbcr0 = DU_PBCR0_PB_DEP(0x1f);
> +
> + writel(ditr0, rcdu->mmio + DU_DITR0);
Please implement read/write wrappers that take an rcdu pointer and add
the offset. It will simplify the callers.
> + writel(ditr1, rcdu->mmio + DU_DITR1);
> + writel(ditr2, rcdu->mmio + DU_DITR2);
> + writel(ditr3, rcdu->mmio + DU_DITR3);
> + writel(ditr4, rcdu->mmio + DU_DITR4);
> + writel(ditr5, rcdu->mmio + DU_DITR5);
> + writel(pbcr0, rcdu->mmio + DU_PBCR0);
> +
> + /* Enable auto resume when underrun */
> + writel(DU_MCR1_PB_AUTOCLR, rcdu->mmio + DU_MCR1);
> +}
> +
> +/* -----------------------------------------------------------------------------
> + * Page Flip
> + */
> +
> +void rzg2l_du_crtc_finish_page_flip(struct rzg2l_du_crtc *rcrtc)
> +{
> + struct drm_pending_vblank_event *event;
> + struct drm_device *dev = rcrtc->crtc.dev;
> + unsigned long flags;
> +
> + spin_lock_irqsave(&dev->event_lock, flags);
> + event = rcrtc->event;
> + rcrtc->event = NULL;
> + spin_unlock_irqrestore(&dev->event_lock, flags);
> +
> + if (!event)
> + return;
> +
> + spin_lock_irqsave(&dev->event_lock, flags);
> + drm_crtc_send_vblank_event(&rcrtc->crtc, event);
> + wake_up(&rcrtc->flip_wait);
> + spin_unlock_irqrestore(&dev->event_lock, flags);
> +
> + drm_crtc_vblank_put(&rcrtc->crtc);
> +}
> +
> +static bool rzg2l_du_crtc_page_flip_pending(struct rzg2l_du_crtc *rcrtc)
> +{
> + struct drm_device *dev = rcrtc->crtc.dev;
> + unsigned long flags;
> + bool pending;
> +
> + spin_lock_irqsave(&dev->event_lock, flags);
> + pending = rcrtc->event;
> + spin_unlock_irqrestore(&dev->event_lock, flags);
> +
> + return pending;
> +}
> +
> +static void rzg2l_du_crtc_wait_page_flip(struct rzg2l_du_crtc *rcrtc)
> +{
> + struct rzg2l_du_device *rcdu = rcrtc->dev;
> +
> + if (wait_event_timeout(rcrtc->flip_wait,
> + !rzg2l_du_crtc_page_flip_pending(rcrtc),
> + msecs_to_jiffies(50)))
> + return;
> +
> + dev_warn(rcdu->dev, "page flip timeout\n");
> +
> + rzg2l_du_crtc_finish_page_flip(rcrtc);
> +}
> +
> +/* -----------------------------------------------------------------------------
> + * Start/Stop and Suspend/Resume
> + */
> +
> +static void rzg2l_du_crtc_setup(struct rzg2l_du_crtc *rcrtc)
> +{
> + /* Configure display timings and output routing */
> + rzg2l_du_crtc_set_display_timing(rcrtc);
> +
> + /* Enable the VSP compositor. */
> + rzg2l_du_vsp_enable(rcrtc);
> +
> + /* Turn vertical blanking interrupt reporting on. */
> + drm_crtc_vblank_on(&rcrtc->crtc);
> +}
> +
> +static int rzg2l_du_crtc_get(struct rzg2l_du_crtc *rcrtc)
> +{
> + int ret;
> +
> + /*
> + * Guard against double-get, as the function is called from both the
> + * .atomic_enable() and .atomic_begin() handlers.
> + */
> + if (rcrtc->initialized)
> + return 0;
> +
> + ret = clk_prepare_enable(rcrtc->rzg2l_clocks.aclk);
> + if (ret < 0)
> + return ret;
> +
> + ret = clk_prepare_enable(rcrtc->rzg2l_clocks.pclk);
> + if (ret < 0)
> + goto error_bus_clock;
> +
> + ret = reset_control_deassert(rcrtc->rstc);
> + if (ret < 0)
> + goto error_peri_clock;
> +
> + rzg2l_du_crtc_setup(rcrtc);
> + rcrtc->initialized = true;
> +
> + return 0;
> +
> +error_peri_clock:
> + clk_disable_unprepare(rcrtc->rzg2l_clocks.pclk);
> +error_bus_clock:
> + clk_disable_unprepare(rcrtc->rzg2l_clocks.aclk);
> + return ret;
> +}
> +
> +static void rzg2l_du_crtc_put(struct rzg2l_du_crtc *rcrtc)
> +{
> + clk_disable_unprepare(rcrtc->rzg2l_clocks.dclk);
> + reset_control_assert(rcrtc->rstc);
> + clk_disable_unprepare(rcrtc->rzg2l_clocks.pclk);
> + clk_disable_unprepare(rcrtc->rzg2l_clocks.aclk);
> +
> + rcrtc->initialized = false;
> +}
> +
> +static void rzg2l_du_start_stop(struct rzg2l_du_crtc *rcrtc, bool start)
> +{
> + struct rzg2l_du_device *rcdu = rcrtc->dev;
> +
> + writel(start ? DU_MCR0_DI_EN : 0, rcdu->mmio + DU_MCR0);
> +}
> +
> +static void rzg2l_du_crtc_start(struct rzg2l_du_crtc *rcrtc)
> +{
> + rzg2l_du_start_stop(rcrtc, true);
> +}
> +
> +static void rzg2l_du_crtc_disable_planes(struct rzg2l_du_crtc *rcrtc)
> +{
> + struct rzg2l_du_device *rcdu = rcrtc->dev;
> + struct drm_crtc *crtc = &rcrtc->crtc;
> +
> + /* Make sure vblank interrupts are enabled. */
> + drm_crtc_vblank_get(crtc);
> +
> + if (!wait_event_timeout(rcrtc->vblank_wait, rcrtc->vblank_count == 0,
> + msecs_to_jiffies(100)))
> + dev_warn(rcdu->dev, "vertical blanking timeout\n");
> +
> + drm_crtc_vblank_put(crtc);
This while function seems dubious given that vblank_count is never set
to a non-zero value. I think you need to revisit the CRTC enable/disable
code to match the needs of your hardware, which seems to be different
than what the R-Car DU needs.
> +}
> +
> +static void rzg2l_du_crtc_stop(struct rzg2l_du_crtc *rcrtc)
> +{
> + struct drm_crtc *crtc = &rcrtc->crtc;
> +
> + /*
> + * Disable all planes and wait for the change to take effect. This is
> + * required as the plane enable registers are updated on vblank, and no
> + * vblank will occur once the CRTC is stopped. Disabling planes when
> + * starting the CRTC thus wouldn't be enough as it would start scanning
> + * out immediately from old frame buffers until the next vblank.
> + *
> + * This increases the CRTC stop delay, especially when multiple CRTCs
> + * are stopped in one operation as we now wait for one vblank per CRTC.
> + * Whether this can be improved needs to be researched.
> + */
> + rzg2l_du_crtc_disable_planes(rcrtc);
> +
> + /*
> + * Disable vertical blanking interrupt reporting. We first need to wait
> + * for page flip completion before stopping the CRTC as userspace
> + * expects page flips to eventually complete.
> + */
> + rzg2l_du_crtc_wait_page_flip(rcrtc);
> + drm_crtc_vblank_off(crtc);
> +
> + /* Disable the VSP compositor. */
> + rzg2l_du_vsp_disable(rcrtc);
> +
> + rzg2l_du_start_stop(rcrtc, false);
> +}
> +
> +/* -----------------------------------------------------------------------------
> + * CRTC Functions
> + */
> +
> +int __rzg2l_du_crtc_plane_atomic_check(struct drm_plane *plane,
> + struct drm_plane_state *state,
> + const struct rzg2l_du_format_info **format)
This function is only called from rzg2l_du_vsp_plane_atomic_check(), I
would inline it there.
> +{
> + struct drm_device *dev = plane->dev;
> + struct drm_crtc_state *crtc_state;
> + int ret;
> +
> + if (!state->crtc) {
> + /*
> + * The visible field is not reset by the DRM core but only
> + * updated by drm_plane_helper_check_state(), set it manually.
> + */
> + state->visible = false;
> + *format = NULL;
> + return 0;
> + }
> +
> + crtc_state = drm_atomic_get_crtc_state(state->state, state->crtc);
> + if (IS_ERR(crtc_state))
> + return PTR_ERR(crtc_state);
> +
> + ret = drm_atomic_helper_check_plane_state(state, crtc_state,
> + DRM_PLANE_NO_SCALING,
> + DRM_PLANE_NO_SCALING,
> + true, true);
> + if (ret < 0)
> + return ret;
> +
> + if (!state->visible) {
> + *format = NULL;
> + return 0;
> + }
> +
> + *format = rzg2l_du_format_info(state->fb->format->format);
> + if (*format == NULL) {
Can this happen, or does the DRM core already checks that the
framebuffer format is supported by the plane ?
> + dev_dbg(dev->dev, "%s: unsupported format %08x\n", __func__,
> + state->fb->format->format);
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static int rzg2l_du_crtc_atomic_check(struct drm_crtc *crtc,
> + struct drm_atomic_state *state)
> +{
> + struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state,
> + crtc);
> + struct rzg2l_du_crtc_state *rstate = to_rzg2l_crtc_state(crtc_state);
> + struct drm_encoder *encoder;
> +
> + /* Store the routes from the CRTC output to the DU outputs. */
> + rstate->outputs = 0;
> +
> + drm_for_each_encoder_mask(encoder, crtc->dev,
> + crtc_state->encoder_mask) {
> + struct rzg2l_du_encoder *renc;
> +
> + /* Skip the writeback encoder. */
> + if (encoder->encoder_type == DRM_MODE_ENCODER_VIRTUAL)
> + continue;
> +
> + renc = to_rzg2l_encoder(encoder);
> + rstate->outputs |= BIT(renc->output);
> + }
Unless I'm mistaken, once you drop dpad0_source, this whole function can
be dropped too.
> +
> + return 0;
> +}
> +
> +static void rzg2l_du_crtc_atomic_enable(struct drm_crtc *crtc,
> + struct drm_atomic_state *state)
> +{
> + struct rzg2l_du_crtc *rcrtc = to_rzg2l_crtc(crtc);
> +
> + rzg2l_du_crtc_get(rcrtc);
> +
> + rzg2l_du_crtc_start(rcrtc);
> +}
> +
> +static void rzg2l_du_crtc_atomic_disable(struct drm_crtc *crtc,
> + struct drm_atomic_state *state)
> +{
> + struct rzg2l_du_crtc *rcrtc = to_rzg2l_crtc(crtc);
> +
> + rzg2l_du_crtc_stop(rcrtc);
> + rzg2l_du_crtc_put(rcrtc);
> +
> + spin_lock_irq(&crtc->dev->event_lock);
> + if (crtc->state->event) {
> + drm_crtc_send_vblank_event(crtc, crtc->state->event);
> + crtc->state->event = NULL;
> + }
> + spin_unlock_irq(&crtc->dev->event_lock);
> +}
> +
> +static void rzg2l_du_crtc_atomic_begin(struct drm_crtc *crtc,
> + struct drm_atomic_state *state)
> +{
> + struct rzg2l_du_crtc *rcrtc = to_rzg2l_crtc(crtc);
> +
> + WARN_ON(!crtc->state->enable);
> +
> + /*
> + * If a mode set is in progress we can be called with the CRTC disabled.
> + * We thus need to first get and setup the CRTC in order to configure
> + * planes. We must *not* put the CRTC in .atomic_flush(), as it must be
> + * kept awake until the .atomic_enable() call that will follow. The get
> + * operation in .atomic_enable() will in that case be a no-op, and the
> + * CRTC will be put later in .atomic_disable().
> + *
> + * If a mode set is not in progress the CRTC is enabled, and the
> + * following get call will be a no-op. There is thus no need to balance
> + * it in .atomic_flush() either.
> + */
This should also be reconsidered based on the needs of your hardware,
given that you don't need to setup planes like in the R-Car DU driver.
The CRTC handling can most likely be simplified a lot.
> + rzg2l_du_crtc_get(rcrtc);
> +
> + rzg2l_du_vsp_atomic_begin(rcrtc);
> +}
> +
> +static void rzg2l_du_crtc_atomic_flush(struct drm_crtc *crtc,
> + struct drm_atomic_state *state)
> +{
> + struct rzg2l_du_crtc *rcrtc = to_rzg2l_crtc(crtc);
> + struct drm_device *dev = rcrtc->crtc.dev;
> + unsigned long flags;
> +
> + if (crtc->state->event) {
> + WARN_ON(drm_crtc_vblank_get(crtc) != 0);
> +
> + spin_lock_irqsave(&dev->event_lock, flags);
> + rcrtc->event = crtc->state->event;
> + crtc->state->event = NULL;
> + spin_unlock_irqrestore(&dev->event_lock, flags);
> + }
> +
> + rzg2l_du_vsp_atomic_flush(rcrtc);
> +}
> +
> +static const struct drm_crtc_helper_funcs crtc_helper_funcs = {
> + .atomic_check = rzg2l_du_crtc_atomic_check,
> + .atomic_begin = rzg2l_du_crtc_atomic_begin,
> + .atomic_flush = rzg2l_du_crtc_atomic_flush,
> + .atomic_enable = rzg2l_du_crtc_atomic_enable,
> + .atomic_disable = rzg2l_du_crtc_atomic_disable,
> +};
> +
> +static void rzg2l_du_crtc_crc_init(struct rzg2l_du_crtc *rcrtc)
> +{
> + const char **sources;
> + unsigned int count;
> + int i = -1;
> +
> + /* Reserve 1 for "auto" source. */
> + count = rcrtc->vsp->num_planes + 1;
> +
> + sources = kmalloc_array(count, sizeof(*sources), GFP_KERNEL);
> + if (!sources)
> + return;
> +
> + sources[0] = kstrdup("auto", GFP_KERNEL);
> + if (!sources[0])
> + goto error;
> +
> + for (i = 0; i < rcrtc->vsp->num_planes; ++i) {
> + struct drm_plane *plane = &rcrtc->vsp->planes[i].plane;
> + char name[16];
> +
> + sprintf(name, "plane%u", plane->base.id);
> + sources[i + 1] = kstrdup(name, GFP_KERNEL);
> + if (!sources[i + 1])
> + goto error;
> + }
> +
> + rcrtc->sources = sources;
> + rcrtc->sources_count = count;
> + return;
> +
> +error:
> + while (i >= 0) {
> + kfree(sources[i]);
> + i--;
> + }
> + kfree(sources);
> +}
> +
> +static void rzg2l_du_crtc_crc_cleanup(struct rzg2l_du_crtc *rcrtc)
> +{
> + unsigned int i;
> +
> + if (!rcrtc->sources)
> + return;
> +
> + for (i = 0; i < rcrtc->sources_count; i++)
> + kfree(rcrtc->sources[i]);
> + kfree(rcrtc->sources);
> +
> + rcrtc->sources = NULL;
> + rcrtc->sources_count = 0;
> +}
> +
> +static struct drm_crtc_state *
> +rzg2l_du_crtc_atomic_duplicate_state(struct drm_crtc *crtc)
> +{
> + struct rzg2l_du_crtc_state *state;
> + struct rzg2l_du_crtc_state *copy;
> +
> + if (WARN_ON(!crtc->state))
> + return NULL;
> +
> + state = to_rzg2l_crtc_state(crtc->state);
> + copy = kmemdup(state, sizeof(*state), GFP_KERNEL);
> + if (!copy)
> + return NULL;
> +
> + __drm_atomic_helper_crtc_duplicate_state(crtc, ©->state);
> +
> + return ©->state;
> +}
> +
> +static void rzg2l_du_crtc_atomic_destroy_state(struct drm_crtc *crtc,
> + struct drm_crtc_state *state)
> +{
> + __drm_atomic_helper_crtc_destroy_state(state);
> + kfree(to_rzg2l_crtc_state(state));
> +}
> +
> +static void rzg2l_du_crtc_cleanup(struct drm_crtc *crtc)
> +{
> + struct rzg2l_du_crtc *rcrtc = to_rzg2l_crtc(crtc);
> +
> + rzg2l_du_crtc_crc_cleanup(rcrtc);
> +
> + return drm_crtc_cleanup(crtc);
> +}
> +
> +static void rzg2l_du_crtc_reset(struct drm_crtc *crtc)
> +{
> + struct rzg2l_du_crtc_state *state;
> +
> + if (crtc->state) {
> + rzg2l_du_crtc_atomic_destroy_state(crtc, crtc->state);
> + crtc->state = NULL;
> + }
> +
> + state = kzalloc(sizeof(*state), GFP_KERNEL);
> + if (!state)
> + return;
> +
> + state->crc.source = VSP1_DU_CRC_NONE;
> + state->crc.index = 0;
> +
> + __drm_atomic_helper_crtc_reset(crtc, &state->state);
> +}
> +
> +static int rzg2l_du_crtc_enable_vblank(struct drm_crtc *crtc)
> +{
> + struct rzg2l_du_crtc *rcrtc = to_rzg2l_crtc(crtc);
> +
> + rcrtc->vblank_enable = true;
> +
> + return 0;
> +}
> +
> +static void rzg2l_du_crtc_disable_vblank(struct drm_crtc *crtc)
> +{
> + struct rzg2l_du_crtc *rcrtc = to_rzg2l_crtc(crtc);
> +
> + rcrtc->vblank_enable = false;
> +}
> +
> +static int rzg2l_du_crtc_parse_crc_source(struct rzg2l_du_crtc *rcrtc,
> + const char *source_name,
> + enum vsp1_du_crc_source *source)
> +{
> + unsigned int index;
> + int ret;
> +
> + /*
> + * Parse the source name. Supported values are "plane%u" to compute the
> + * CRC on an input plane (%u is the plane ID), and "auto" to compute the
> + * CRC on the composer (VSP) output.
> + */
> +
> + if (!source_name) {
> + *source = VSP1_DU_CRC_NONE;
> + return 0;
> + } else if (!strcmp(source_name, "auto")) {
> + *source = VSP1_DU_CRC_OUTPUT;
> + return 0;
> + } else if (strstarts(source_name, "plane")) {
> + unsigned int i;
> +
> + *source = VSP1_DU_CRC_PLANE;
> +
> + ret = kstrtouint(source_name + strlen("plane"), 10, &index);
> + if (ret < 0)
> + return ret;
> +
> + for (i = 0; i < rcrtc->vsp->num_planes; ++i) {
> + if (index == rcrtc->vsp->planes[i].plane.base.id)
> + return i;
> + }
> + }
> +
> + return -EINVAL;
> +}
> +
> +static int rzg2l_du_crtc_verify_crc_source(struct drm_crtc *crtc,
> + const char *source_name,
> + size_t *values_cnt)
> +{
> + struct rzg2l_du_crtc *rcrtc = to_rzg2l_crtc(crtc);
> + enum vsp1_du_crc_source source;
> +
> + if (rzg2l_du_crtc_parse_crc_source(rcrtc, source_name, &source) < 0) {
> + DRM_DEBUG_DRIVER("unknown source %s\n", source_name);
> + return -EINVAL;
> + }
> +
> + *values_cnt = 1;
> + return 0;
> +}
> +
> +static const char *const *
> +rzg2l_du_crtc_get_crc_sources(struct drm_crtc *crtc, size_t *count)
> +{
> + struct rzg2l_du_crtc *rcrtc = to_rzg2l_crtc(crtc);
> +
> + *count = rcrtc->sources_count;
> + return rcrtc->sources;
> +}
> +
> +static int rzg2l_du_crtc_set_crc_source(struct drm_crtc *crtc,
> + const char *source_name)
> +{
> + struct rzg2l_du_crtc *rcrtc = to_rzg2l_crtc(crtc);
> + struct drm_modeset_acquire_ctx ctx;
> + struct drm_crtc_state *crtc_state;
> + struct drm_atomic_state *state;
> + enum vsp1_du_crc_source source;
> + unsigned int index;
> + int ret;
> +
> + ret = rzg2l_du_crtc_parse_crc_source(rcrtc, source_name, &source);
> + if (ret < 0)
> + return ret;
> +
> + index = ret;
> +
> + /* Perform an atomic commit to set the CRC source. */
> + drm_modeset_acquire_init(&ctx, 0);
> +
> + state = drm_atomic_state_alloc(crtc->dev);
> + if (!state) {
> + ret = -ENOMEM;
> + goto unlock;
> + }
> +
> + state->acquire_ctx = &ctx;
> +
> +retry:
> + crtc_state = drm_atomic_get_crtc_state(state, crtc);
> + if (!IS_ERR(crtc_state)) {
> + struct rzg2l_du_crtc_state *rcrtc_state;
> +
> + rcrtc_state = to_rzg2l_crtc_state(crtc_state);
> + rcrtc_state->crc.source = source;
> + rcrtc_state->crc.index = index;
> +
> + ret = drm_atomic_commit(state);
> + } else {
> + ret = PTR_ERR(crtc_state);
> + }
> +
> + if (ret == -EDEADLK) {
> + drm_atomic_state_clear(state);
> + drm_modeset_backoff(&ctx);
> + goto retry;
> + }
> +
> + drm_atomic_state_put(state);
> +
> +unlock:
> + drm_modeset_drop_locks(&ctx);
> + drm_modeset_acquire_fini(&ctx);
> +
> + return ret;
> +}
> +
> +static const struct drm_crtc_funcs crtc_funcs_rz = {
> + .reset = rzg2l_du_crtc_reset,
> + .destroy = rzg2l_du_crtc_cleanup,
> + .set_config = drm_atomic_helper_set_config,
> + .page_flip = drm_atomic_helper_page_flip,
> + .atomic_duplicate_state = rzg2l_du_crtc_atomic_duplicate_state,
> + .atomic_destroy_state = rzg2l_du_crtc_atomic_destroy_state,
> + .enable_vblank = rzg2l_du_crtc_enable_vblank,
> + .disable_vblank = rzg2l_du_crtc_disable_vblank,
> + .set_crc_source = rzg2l_du_crtc_set_crc_source,
> + .verify_crc_source = rzg2l_du_crtc_verify_crc_source,
> + .get_crc_sources = rzg2l_du_crtc_get_crc_sources,
> +};
> +
> +/* -----------------------------------------------------------------------------
> + * Initialization
> + */
> +
> +int rzg2l_du_crtc_create(struct rzg2l_du_device *rcdu)
> +{
> + struct rzg2l_du_crtc *rcrtc = &rcdu->crtcs[0];
> + struct drm_crtc *crtc = &rcrtc->crtc;
> + struct drm_plane *primary;
> + int ret;
> +
> + rcrtc->rstc = devm_reset_control_get_shared(rcdu->dev, NULL);
> + if (IS_ERR(rcrtc->rstc)) {
> + dev_err(rcdu->dev, "can't get cpg reset\n");
> + return PTR_ERR(rcrtc->rstc);
> + }
> +
> + rcrtc->rzg2l_clocks.aclk = devm_clk_get(rcdu->dev, "aclk");
> + if (IS_ERR(rcrtc->rzg2l_clocks.aclk)) {
> + dev_err(rcdu->dev, "no axi clock for DU\n");
> + return PTR_ERR(rcrtc->rzg2l_clocks.aclk);
> + }
> +
> + rcrtc->rzg2l_clocks.pclk = devm_clk_get(rcdu->dev, "pclk");
> + if (IS_ERR(rcrtc->rzg2l_clocks.pclk)) {
> + dev_err(rcdu->dev, "no peripheral clock for DU\n");
> + return PTR_ERR(rcrtc->rzg2l_clocks.pclk);
> + }
> +
> + rcrtc->rzg2l_clocks.dclk = devm_clk_get(rcdu->dev, "vclk");
> + if (IS_ERR(rcrtc->rzg2l_clocks.dclk)) {
> + dev_err(rcdu->dev, "no video clock for DU\n");
> + return PTR_ERR(rcrtc->rzg2l_clocks.dclk);
> + }
> +
> + init_waitqueue_head(&rcrtc->flip_wait);
> + init_waitqueue_head(&rcrtc->vblank_wait);
> + spin_lock_init(&rcrtc->vblank_lock);
> +
> + rcrtc->dev = rcdu;
> + rcrtc->index = 0;
> +
> + primary = &rcrtc->vsp->planes[rcrtc->vsp_pipe].plane;
> +
> + ret = drm_crtc_init_with_planes(&rcdu->ddev, crtc, primary, NULL,
> + &crtc_funcs_rz, NULL);
> + if (ret < 0)
> + return ret;
> +
> + drm_crtc_helper_add(crtc, &crtc_helper_funcs);
> +
> + rzg2l_du_crtc_crc_init(rcrtc);
> +
> + return 0;
> +}
> diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.h b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.h
> new file mode 100644
> index 000000000000..290b5ea99545
> --- /dev/null
> +++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.h
> @@ -0,0 +1,99 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * RZ/G2L Display Unit CRTCs
> + *
> + * Copyright (C) 2023 Renesas Electronics Corporation
> + *
> + * Based on rcar_du_crtc.h
> + */
> +
> +#ifndef __RZG2L_DU_CRTC_H__
> +#define __RZG2L_DU_CRTC_H__
> +
> +#include <linux/mutex.h>
> +#include <linux/spinlock.h>
> +#include <linux/wait.h>
> +
> +#include <drm/drm_crtc.h>
> +#include <drm/drm_writeback.h>
> +
> +#include <media/vsp1.h>
> +
Missing struct clk. Please go through the headers and add missing
forward declarations, or drop unneeded ones.
> +struct reset_control;
> +struct rzg2l_du_vsp;
> +struct rzg2l_du_format_info;
> +
> +/**
> + * struct rzg2l_du_crtc - the CRTC, representing a DU superposition processor
> + * @crtc: base DRM CRTC
> + * @dev: the DU device
> + * @mmio_offset: offset of the CRTC registers in the DU MMIO block
> + * @index: CRTC hardware index
> + * @initialized: whether the CRTC has been initialized and clocks enabled
> + * @vblank_enable: whether vblank events are enabled on this CRTC
> + * @event: event to post when the pending page flip completes
> + * @flip_wait: wait queue used to signal page flip completion
> + * @vblank_lock: protects vblank_wait and vblank_count
> + * @vblank_wait: wait queue used to signal vertical blanking
> + * @vblank_count: number of vertical blanking interrupts to wait for
> + * @vsp: VSP feeding video to this CRTC
> + * @vsp_pipe: index of the VSP pipeline feeding video to this CRTC
> + * @rstc: reset controller
> + * @rzg2l_clocks: the bus, main and video clock
> + */
> +struct rzg2l_du_crtc {
> + struct drm_crtc crtc;
> +
> + struct rzg2l_du_device *dev;
> + unsigned int mmio_offset;
Not used. Please go through all structure fields and drop the unused
ones (including both the fully unused fields, and the fields that are
written but never read).
> + unsigned int index;
> + bool initialized;
> +
> + bool vblank_enable;
> + struct drm_pending_vblank_event *event;
> + wait_queue_head_t flip_wait;
> +
> + spinlock_t vblank_lock;
> + wait_queue_head_t vblank_wait;
> + unsigned int vblank_count;
> +
> + struct rzg2l_du_vsp *vsp;
> + unsigned int vsp_pipe;
> +
> + const char *const *sources;
> + unsigned int sources_count;
> +
> + struct reset_control *rstc;
> + struct {
> + struct clk *aclk;
> + struct clk *pclk;
> + struct clk *dclk;
> + } rzg2l_clocks;
> +};
> +
> +#define to_rzg2l_crtc(c) container_of(c, struct rzg2l_du_crtc, crtc)
A static inline would be better than a macro, it's more type-safe. Same
for to_rzg2l_crtc_state() and to_rzg2l_encoder().
> +
> +/**
> + * struct rzg2l_du_crtc_state - Driver-specific CRTC state
> + * @state: base DRM CRTC state
> + * @crc: CRC computation configuration
> + * @outputs: bitmask of the outputs (enum rzg2l_du_output) driven by this CRTC
> + */
> +struct rzg2l_du_crtc_state {
> + struct drm_crtc_state state;
> +
> + struct vsp1_du_crc_config crc;
> + unsigned int outputs;
> +};
> +
> +#define to_rzg2l_crtc_state(s) container_of(s, struct rzg2l_du_crtc_state, state)
> +
> +int rzg2l_du_crtc_create(struct rzg2l_du_device *rcdu);
> +
> +void rzg2l_du_crtc_finish_page_flip(struct rzg2l_du_crtc *rcrtc);
> +
> +int __rzg2l_du_crtc_plane_atomic_check(struct drm_plane *plane,
> + struct drm_plane_state *state,
> + const struct rzg2l_du_format_info **format);
> +
> +#endif /* __RZG2L_DU_CRTC_H__ */
> diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c
> new file mode 100644
> index 000000000000..0fea1fea837c
> --- /dev/null
> +++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c
> @@ -0,0 +1,188 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * RZ/G2L Display Unit DRM driver
> + *
> + * Copyright (C) 2023 Renesas Electronics Corporation
> + *
> + * Based on rcar_du_drv.c
> + */
> +
> +#include <linux/clk.h>
Not needed.
> +#include <linux/dma-mapping.h>
> +#include <linux/io.h>
Not needed either. Could you check if the other headers are needed ?
> +#include <linux/mm.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm.h>
> +#include <linux/slab.h>
> +#include <linux/wait.h>
> +
> +#include <drm/drm_atomic_helper.h>
> +#include <drm/drm_drv.h>
> +#include <drm/drm_fbdev_generic.h>
> +#include <drm/drm_gem_dma_helper.h>
> +#include <drm/drm_managed.h>
> +#include <drm/drm_probe_helper.h>
> +
> +#include "rzg2l_du_drv.h"
> +#include "rzg2l_du_kms.h"
> +
> +/* -----------------------------------------------------------------------------
> + * Device Information
> + */
> +
> +static const struct rzg2l_du_device_info rzg2l_du_r9a07g044_info = {
> + .channels_mask = BIT(0),
> + .routes = {
> + [RZG2L_DU_OUTPUT_DSI0] = {
> + .possible_crtcs = BIT(0),
> + .port = 0,
> + },
> + [RZG2L_DU_OUTPUT_DPAD0] = {
> + .possible_crtcs = BIT(0),
> + .port = 1,
> + }
> + }
> +};
> +
> +static const struct of_device_id rzg2l_du_of_table[] = {
> + { .compatible = "renesas,r9a07g044-du", .data = &rzg2l_du_r9a07g044_info },
> + { /* sentinel */ }
> +};
> +
> +MODULE_DEVICE_TABLE(of, rzg2l_du_of_table);
> +
> +const char *rzg2l_du_output_name(enum rzg2l_du_output output)
> +{
> + static const char * const names[] = {
> + [RZG2L_DU_OUTPUT_DSI0] = "DSI0",
> + [RZG2L_DU_OUTPUT_DPAD0] = "DPAD0"
> + };
> +
> + if (output >= ARRAY_SIZE(names))
> + return "UNKNOWN";
> +
> + return names[output];
> +}
> +
> +/* -----------------------------------------------------------------------------
> + * DRM operations
> + */
> +
> +DEFINE_DRM_GEM_DMA_FOPS(rzg2l_du_fops);
> +
> +static const struct drm_driver rzg2l_du_driver = {
> + .driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC,
> + .dumb_create = rzg2l_du_dumb_create,
> + .prime_handle_to_fd = drm_gem_prime_handle_to_fd,
> + .prime_fd_to_handle = drm_gem_prime_fd_to_handle,
> + .gem_prime_import_sg_table = rzg2l_du_gem_prime_import_sg_table,
> + .gem_prime_mmap = drm_gem_prime_mmap,
> + .fops = &rzg2l_du_fops,
> + .name = "rzg2l-du",
> + .desc = "Renesas RZ/G2L Display Unit",
> + .date = "20230410",
> + .major = 1,
> + .minor = 0,
> +};
> +
> +/* -----------------------------------------------------------------------------
> + * Platform driver
> + */
> +
> +static int rzg2l_du_remove(struct platform_device *pdev)
> +{
> + struct rzg2l_du_device *rcdu = platform_get_drvdata(pdev);
> + struct drm_device *ddev = &rcdu->ddev;
> +
> + drm_dev_unregister(ddev);
> + drm_atomic_helper_shutdown(ddev);
> +
> + drm_kms_helper_poll_fini(ddev);
> +
> + return 0;
> +}
> +
> +static void rzg2l_du_shutdown(struct platform_device *pdev)
> +{
> + struct rzg2l_du_device *rcdu = platform_get_drvdata(pdev);
> +
> + drm_atomic_helper_shutdown(&rcdu->ddev);
> +}
> +
> +static int rzg2l_du_probe(struct platform_device *pdev)
> +{
> + struct rzg2l_du_device *rcdu;
> + int ret;
> +
> + if (drm_firmware_drivers_only())
> + return -ENODEV;
> +
> + /* Allocate and initialize the RZ/G2L device structure. */
> + rcdu = devm_drm_dev_alloc(&pdev->dev, &rzg2l_du_driver,
> + struct rzg2l_du_device, ddev);
> + if (IS_ERR(rcdu))
> + return PTR_ERR(rcdu);
> +
> + rcdu->dev = &pdev->dev;
> + rcdu->info = of_device_get_match_data(rcdu->dev);
> +
> + platform_set_drvdata(pdev, rcdu);
> +
> + /* I/O resources */
> + rcdu->mmio = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(rcdu->mmio))
> + return PTR_ERR(rcdu->mmio);
> +
> + /*
> + * When sourcing frames from a VSP the DU doesn't perform any memory
> + * access so set the DMA coherent mask to 40 bits to accept all buffers.
> + */
> + ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(40));
> + if (ret)
> + return ret;
> +
> + /* DRM/KMS objects */
> + ret = rzg2l_du_modeset_init(rcdu);
> + if (ret < 0) {
> + if (ret != -EPROBE_DEFER)
> + dev_err(&pdev->dev,
> + "failed to initialize DRM/KMS (%d)\n", ret);
Use dev_err_probe()
> + goto error;
> + }
> +
> + /*
> + * Register the DRM device with the core and the connectors with
> + * sysfs.
> + */
> + ret = drm_dev_register(&rcdu->ddev, 0);
> + if (ret)
> + goto error;
> +
> + DRM_INFO("Device %s probed\n", dev_name(&pdev->dev));
Use drm_info().
> +
> + drm_fbdev_generic_setup(&rcdu->ddev, 32);
> +
> + return 0;
> +
> +error:
> + drm_kms_helper_poll_fini(&rcdu->ddev);
> + return ret;
> +}
> +
> +static struct platform_driver rzg2l_du_platform_driver = {
> + .probe = rzg2l_du_probe,
> + .remove = rzg2l_du_remove,
> + .shutdown = rzg2l_du_shutdown,
> + .driver = {
> + .name = "rzg2l-du",
> + .of_match_table = rzg2l_du_of_table,
> + },
> +};
> +
> +module_platform_driver(rzg2l_du_platform_driver);
> +
> +MODULE_AUTHOR("Biju Das <biju.das.jz@bp.renesas.com>");
> +MODULE_DESCRIPTION("Renesas RZ/G2L Display Unit DRM Driver");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h
> new file mode 100644
> index 000000000000..3b84e91aa64a
> --- /dev/null
> +++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h
> @@ -0,0 +1,89 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * RZ/G2L Display Unit DRM driver
> + *
> + * Copyright (C) 2023 Renesas Electronics Corporation
> + *
> + * Based on rcar_du_drv.h
> + */
> +
> +#ifndef __RZG2L_DU_DRV_H__
> +#define __RZG2L_DU_DRV_H__
> +
> +#include <linux/kernel.h>
> +#include <linux/wait.h>
Not needed.
> +
> +#include <drm/drm_device.h>
> +
> +#include "rzg2l_du_crtc.h"
> +#include "rzg2l_du_vsp.h"
> +
> +struct clk;
Not used in this header.
> +struct device;
> +struct drm_bridge;
> +struct drm_property;
> +struct rzg2l_du_device;
Not needed.
> +
> +enum rzg2l_du_output {
> + RZG2L_DU_OUTPUT_DSI0,
> + RZG2L_DU_OUTPUT_DPAD0,
> + RZG2L_DU_OUTPUT_MAX,
> +};
> +
> +/*
> + * struct rzg2l_du_output_routing - Output routing specification
> + * @possible_crtcs: bitmask of possible CRTCs for the output
> + * @port: device tree port number corresponding to this output route
> + *
> + * The DU has 2 possible outputs (DPAD0, DSI0). Output routing data
> + * specify the valid SoC outputs, which CRTCs can drive the output, and the type
> + * of in-SoC encoder for the output.
> + */
> +struct rzg2l_du_output_routing {
> + unsigned int possible_crtcs;
> + unsigned int port;
> +};
> +
> +/*
> + * struct rzg2l_du_device_info - DU model-specific information
> + * @channels_mask: bit mask of available DU channels
> + * @routes: array of CRTC to output routes, indexed by output (RZG2L_DU_OUTPUT_*)
> + */
> +struct rzg2l_du_device_info {
> + unsigned int channels_mask;
> + struct rzg2l_du_output_routing routes[RZG2L_DU_OUTPUT_MAX];
> +};
The driver supports a single SoC, with two outputs, connected to the
same DU channel. Do you really need to copy the rzg2l_du_device_info
abstraction from the rcar-du driver, or could you simplify the code ?
> +
> +#define RZG2L_DU_MAX_CRTCS 1
> +#define RZG2L_DU_MAX_VSPS 1
> +#define RZG2L_DU_MAX_DSI 1
> +
> +struct rzg2l_du_device {
> + struct device *dev;
> + const struct rzg2l_du_device_info *info;
> +
> + void __iomem *mmio;
> +
> + struct drm_device ddev;
> +
> + struct rzg2l_du_crtc crtcs[RZG2L_DU_MAX_CRTCS];
> + unsigned int num_crtcs;
> +
> + struct rzg2l_du_vsp vsps[RZG2L_DU_MAX_VSPS];
> + struct drm_bridge *dsi[RZG2L_DU_MAX_DSI];
This is written but never read. You can drop the field.
> +
> + struct {
> + struct drm_property *colorkey;
> + } props;
> +
> + unsigned int dpad0_source;
This is written but never read. You can drop the field.
> +};
> +
> +static inline struct rzg2l_du_device *to_rzg2l_du_device(struct drm_device *dev)
> +{
> + return container_of(dev, struct rzg2l_du_device, ddev);
> +}
> +
> +const char *rzg2l_du_output_name(enum rzg2l_du_output output);
> +
> +#endif /* __RZG2L_DU_DRV_H__ */
> diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.c b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.c
> new file mode 100644
> index 000000000000..3dc64f2fa767
> --- /dev/null
> +++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.c
> @@ -0,0 +1,112 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * RZ/G2L Display Unit Encoder
> + *
> + * Copyright (C) 2023 Renesas Electronics Corporation
> + *
> + * Based on rcar_du_encoder.c
> + */
> +
> +#include <linux/export.h>
> +#include <linux/of.h>
> +
> +#include <drm/drm_bridge.h>
> +#include <drm/drm_bridge_connector.h>
> +#include <drm/drm_panel.h>
> +
> +#include "rzg2l_du_drv.h"
> +#include "rzg2l_du_encoder.h"
> +
> +/* -----------------------------------------------------------------------------
> + * Encoder
> + */
> +
> +static unsigned int rzg2l_du_encoder_count_ports(struct device_node *node)
> +{
> + struct device_node *ports;
> + struct device_node *port;
> + unsigned int num_ports = 0;
> +
> + ports = of_get_child_by_name(node, "ports");
> + if (!ports)
> + ports = of_node_get(node);
> +
> + for_each_child_of_node(ports, port) {
> + if (of_node_name_eq(port, "port"))
> + num_ports++;
> + }
> +
> + of_node_put(ports);
> +
> + return num_ports;
> +}
> +
> +static const struct drm_encoder_funcs rzg2l_du_encoder_funcs = {
> +};
> +
> +int rzg2l_du_encoder_init(struct rzg2l_du_device *rcdu,
> + enum rzg2l_du_output output,
> + struct device_node *enc_node)
> +{
> + struct rzg2l_du_encoder *renc;
> + struct drm_connector *connector;
> + struct drm_bridge *bridge;
> + int ret;
> +
> + /*
> + * Locate the DRM bridge from the DT node. For the DPAD outputs, if the
> + * DT node has a single port, assume that it describes a panel and
> + * create a panel bridge.
> + */
> + if (output == RZG2L_DU_OUTPUT_DPAD0 &&
> + rzg2l_du_encoder_count_ports(enc_node) == 1) {
> + struct drm_panel *panel = of_drm_find_panel(enc_node);
> +
> + if (IS_ERR(panel))
> + return PTR_ERR(panel);
> +
> + bridge = devm_drm_panel_bridge_add_typed(rcdu->dev, panel,
> + DRM_MODE_CONNECTOR_DPI);
> + if (IS_ERR(bridge))
> + return PTR_ERR(bridge);
> + } else {
> + bridge = of_drm_find_bridge(enc_node);
> + if (!bridge)
> + return -EPROBE_DEFER;
> +
> + if (output == RZG2L_DU_OUTPUT_DSI0)
> + rcdu->dsi[output - RZG2L_DU_OUTPUT_DSI0] = bridge;
> + }
> +
> + dev_dbg(rcdu->dev, "initializing encoder %pOF for output %s\n",
> + enc_node, rzg2l_du_output_name(output));
> +
> + renc = drmm_encoder_alloc(&rcdu->ddev, struct rzg2l_du_encoder, base,
> + &rzg2l_du_encoder_funcs, DRM_MODE_ENCODER_NONE,
> + NULL);
> + if (IS_ERR(renc))
> + return PTR_ERR(renc);
> +
> + renc->output = output;
> +
> + /* Attach the bridge to the encoder. */
> + ret = drm_bridge_attach(&renc->base, bridge, NULL,
> + DRM_BRIDGE_ATTACH_NO_CONNECTOR);
> + if (ret) {
> + dev_err(rcdu->dev,
> + "failed to attach bridge %pOF for output %s (%d)\n",
> + bridge->of_node, rzg2l_du_output_name(output), ret);
> + return ret;
> + }
> +
> + /* Create the connector for the chain of bridges. */
> + connector = drm_bridge_connector_init(&rcdu->ddev, &renc->base);
> + if (IS_ERR(connector)) {
> + dev_err(rcdu->dev,
> + "failed to created connector for output %s (%ld)\n",
> + rzg2l_du_output_name(output), PTR_ERR(connector));
> + return PTR_ERR(connector);
> + }
> +
> + return drm_connector_attach_encoder(connector, &renc->base);
> +}
> diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.h b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.h
> new file mode 100644
> index 000000000000..1065c9962507
> --- /dev/null
> +++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.h
> @@ -0,0 +1,28 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * RZ/G2L Display Unit Encoder
> + *
> + * Copyright (C) 2023 Renesas Electronics Corporation
> + *
> + * Based on rcar_du_encoder.h
> + */
> +
> +#ifndef __RZG2L_DU_ENCODER_H__
> +#define __RZG2L_DU_ENCODER_H__
> +
> +#include <drm/drm_encoder.h>
> +
> +struct rzg2l_du_device;
> +
> +struct rzg2l_du_encoder {
> + struct drm_encoder base;
> + enum rzg2l_du_output output;
> +};
> +
> +#define to_rzg2l_encoder(e) container_of(e, struct rzg2l_du_encoder, base)
> +
> +int rzg2l_du_encoder_init(struct rzg2l_du_device *rcdu,
> + enum rzg2l_du_output output,
> + struct device_node *enc_node);
> +
> +#endif /* __RZG2L_DU_ENCODER_H__ */
> diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.c b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.c
> new file mode 100644
> index 000000000000..cf5653219e37
> --- /dev/null
> +++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.c
> @@ -0,0 +1,770 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * RZ/G2L Display Unit Mode Setting
> + *
> + * Copyright (C) 2023 Renesas Electronics Corporation
> + *
> + * Based on rcar_du_kms.c
> + */
> +
> +#include <drm/drm_atomic.h>
> +#include <drm/drm_atomic_helper.h>
> +#include <drm/drm_crtc.h>
> +#include <drm/drm_device.h>
> +#include <drm/drm_framebuffer.h>
> +#include <drm/drm_gem_dma_helper.h>
> +#include <drm/drm_gem_framebuffer_helper.h>
> +#include <drm/drm_managed.h>
> +#include <drm/drm_probe_helper.h>
> +#include <drm/drm_vblank.h>
> +
> +#include <linux/device.h>
> +#include <linux/dma-buf.h>
> +#include <linux/of_graph.h>
> +#include <linux/of_platform.h>
> +#include <linux/wait.h>
> +
> +#include "rzg2l_du_crtc.h"
> +#include "rzg2l_du_drv.h"
> +#include "rzg2l_du_encoder.h"
> +#include "rzg2l_du_kms.h"
> +#include "rzg2l_du_vsp.h"
> +
> +/* -----------------------------------------------------------------------------
> + * Format helpers
> + */
> +
> +static const struct rzg2l_du_format_info rzg2l_du_format_infos[] = {
> + {
> + .fourcc = DRM_FORMAT_RGB565,
> + .v4l2 = V4L2_PIX_FMT_RGB565,
> + .bpp = 16,
> + .planes = 1,
> + .hsub = 1,
> + }, {
> + .fourcc = DRM_FORMAT_ARGB1555,
> + .v4l2 = V4L2_PIX_FMT_ARGB555,
> + .bpp = 16,
> + .planes = 1,
> + .hsub = 1,
> + }, {
> + .fourcc = DRM_FORMAT_XRGB1555,
> + .v4l2 = V4L2_PIX_FMT_XRGB555,
> + .bpp = 16,
> + .planes = 1,
> + }, {
> + .fourcc = DRM_FORMAT_XRGB8888,
> + .v4l2 = V4L2_PIX_FMT_XBGR32,
> + .bpp = 32,
> + .planes = 1,
> + .hsub = 1,
> + }, {
> + .fourcc = DRM_FORMAT_ARGB8888,
> + .v4l2 = V4L2_PIX_FMT_ABGR32,
> + .bpp = 32,
> + .planes = 1,
> + .hsub = 1,
> + }, {
> + .fourcc = DRM_FORMAT_UYVY,
> + .v4l2 = V4L2_PIX_FMT_UYVY,
> + .bpp = 16,
> + .planes = 1,
> + .hsub = 2,
> + }, {
> + .fourcc = DRM_FORMAT_YUYV,
> + .v4l2 = V4L2_PIX_FMT_YUYV,
> + .bpp = 16,
> + .planes = 1,
> + .hsub = 2,
> + }, {
> + .fourcc = DRM_FORMAT_NV12,
> + .v4l2 = V4L2_PIX_FMT_NV12M,
> + .bpp = 12,
> + .planes = 2,
> + .hsub = 2,
> + }, {
> + .fourcc = DRM_FORMAT_NV21,
> + .v4l2 = V4L2_PIX_FMT_NV21M,
> + .bpp = 12,
> + .planes = 2,
> + .hsub = 2,
> + }, {
> + .fourcc = DRM_FORMAT_NV16,
> + .v4l2 = V4L2_PIX_FMT_NV16M,
> + .bpp = 16,
> + .planes = 2,
> + .hsub = 2,
> + },
> + {
> + .fourcc = DRM_FORMAT_RGB332,
> + .v4l2 = V4L2_PIX_FMT_RGB332,
> + .bpp = 8,
> + .planes = 1,
> + .hsub = 1,
> + }, {
> + .fourcc = DRM_FORMAT_ARGB4444,
> + .v4l2 = V4L2_PIX_FMT_ARGB444,
> + .bpp = 16,
> + .planes = 1,
> + .hsub = 1,
> + }, {
> + .fourcc = DRM_FORMAT_XRGB4444,
> + .v4l2 = V4L2_PIX_FMT_XRGB444,
> + .bpp = 16,
> + .planes = 1,
> + .hsub = 1,
> + }, {
> + .fourcc = DRM_FORMAT_RGBA4444,
> + .v4l2 = V4L2_PIX_FMT_RGBA444,
> + .bpp = 16,
> + .planes = 1,
> + .hsub = 1,
> + }, {
> + .fourcc = DRM_FORMAT_RGBX4444,
> + .v4l2 = V4L2_PIX_FMT_RGBX444,
> + .bpp = 16,
> + .planes = 1,
> + .hsub = 1,
> + }, {
> + .fourcc = DRM_FORMAT_ABGR4444,
> + .v4l2 = V4L2_PIX_FMT_ABGR444,
> + .bpp = 16,
> + .planes = 1,
> + .hsub = 1,
> + }, {
> + .fourcc = DRM_FORMAT_XBGR4444,
> + .v4l2 = V4L2_PIX_FMT_XBGR444,
> + .bpp = 16,
> + .planes = 1,
> + .hsub = 1,
> + }, {
> + .fourcc = DRM_FORMAT_BGRA4444,
> + .v4l2 = V4L2_PIX_FMT_BGRA444,
> + .bpp = 16,
> + .planes = 1,
> + .hsub = 1,
> + }, {
> + .fourcc = DRM_FORMAT_BGRX4444,
> + .v4l2 = V4L2_PIX_FMT_BGRX444,
> + .bpp = 16,
> + .planes = 1,
> + .hsub = 1,
> + }, {
> + .fourcc = DRM_FORMAT_RGBA5551,
> + .v4l2 = V4L2_PIX_FMT_RGBA555,
> + .bpp = 16,
> + .planes = 1,
> + .hsub = 1,
> + }, {
> + .fourcc = DRM_FORMAT_RGBX5551,
> + .v4l2 = V4L2_PIX_FMT_RGBX555,
> + .bpp = 16,
> + .planes = 1,
> + .hsub = 1,
> + }, {
> + .fourcc = DRM_FORMAT_ABGR1555,
> + .v4l2 = V4L2_PIX_FMT_ABGR555,
> + .bpp = 16,
> + .planes = 1,
> + .hsub = 1,
> + }, {
> + .fourcc = DRM_FORMAT_XBGR1555,
> + .v4l2 = V4L2_PIX_FMT_XBGR555,
> + .bpp = 16,
> + .planes = 1,
> + .hsub = 1,
> + }, {
> + .fourcc = DRM_FORMAT_BGRA5551,
> + .v4l2 = V4L2_PIX_FMT_BGRA555,
> + .bpp = 16,
> + .planes = 1,
> + .hsub = 1,
> + }, {
> + .fourcc = DRM_FORMAT_BGRX5551,
> + .v4l2 = V4L2_PIX_FMT_BGRX555,
> + .bpp = 16,
> + .planes = 1,
> + .hsub = 1,
> + }, {
> + .fourcc = DRM_FORMAT_BGR888,
> + .v4l2 = V4L2_PIX_FMT_RGB24,
> + .bpp = 24,
> + .planes = 1,
> + .hsub = 1,
> + }, {
> + .fourcc = DRM_FORMAT_RGB888,
> + .v4l2 = V4L2_PIX_FMT_BGR24,
> + .bpp = 24,
> + .planes = 1,
> + .hsub = 1,
> + }, {
> + .fourcc = DRM_FORMAT_RGBA8888,
> + .v4l2 = V4L2_PIX_FMT_BGRA32,
> + .bpp = 32,
> + .planes = 1,
> + .hsub = 1,
> + }, {
> + .fourcc = DRM_FORMAT_RGBX8888,
> + .v4l2 = V4L2_PIX_FMT_BGRX32,
> + .bpp = 32,
> + .planes = 1,
> + .hsub = 1,
> + }, {
> + .fourcc = DRM_FORMAT_ABGR8888,
> + .v4l2 = V4L2_PIX_FMT_RGBA32,
> + .bpp = 32,
> + .planes = 1,
> + .hsub = 1,
> + }, {
> + .fourcc = DRM_FORMAT_XBGR8888,
> + .v4l2 = V4L2_PIX_FMT_RGBX32,
> + .bpp = 32,
> + .planes = 1,
> + .hsub = 1,
> + }, {
> + .fourcc = DRM_FORMAT_BGRA8888,
> + .v4l2 = V4L2_PIX_FMT_ARGB32,
> + .bpp = 32,
> + .planes = 1,
> + .hsub = 1,
> + }, {
> + .fourcc = DRM_FORMAT_BGRX8888,
> + .v4l2 = V4L2_PIX_FMT_XRGB32,
> + .bpp = 32,
> + .planes = 1,
> + .hsub = 1,
> + }, {
> + .fourcc = DRM_FORMAT_RGBX1010102,
> + .v4l2 = V4L2_PIX_FMT_RGBX1010102,
> + .bpp = 32,
> + .planes = 1,
> + .hsub = 1,
> + }, {
> + .fourcc = DRM_FORMAT_RGBA1010102,
> + .v4l2 = V4L2_PIX_FMT_RGBA1010102,
> + .bpp = 32,
> + .planes = 1,
> + .hsub = 1,
> + }, {
> + .fourcc = DRM_FORMAT_ARGB2101010,
> + .v4l2 = V4L2_PIX_FMT_ARGB2101010,
> + .bpp = 32,
> + .planes = 1,
> + .hsub = 1,
> + }, {
> + .fourcc = DRM_FORMAT_YVYU,
> + .v4l2 = V4L2_PIX_FMT_YVYU,
> + .bpp = 16,
> + .planes = 1,
> + .hsub = 2,
> + }, {
> + .fourcc = DRM_FORMAT_NV61,
> + .v4l2 = V4L2_PIX_FMT_NV61M,
> + .bpp = 16,
> + .planes = 2,
> + .hsub = 2,
> + }, {
> + .fourcc = DRM_FORMAT_YUV420,
> + .v4l2 = V4L2_PIX_FMT_YUV420M,
> + .bpp = 12,
> + .planes = 3,
> + .hsub = 2,
> + }, {
> + .fourcc = DRM_FORMAT_YVU420,
> + .v4l2 = V4L2_PIX_FMT_YVU420M,
> + .bpp = 12,
> + .planes = 3,
> + .hsub = 2,
> + }, {
> + .fourcc = DRM_FORMAT_YUV422,
> + .v4l2 = V4L2_PIX_FMT_YUV422M,
> + .bpp = 16,
> + .planes = 3,
> + .hsub = 2,
> + }, {
> + .fourcc = DRM_FORMAT_YVU422,
> + .v4l2 = V4L2_PIX_FMT_YVU422M,
> + .bpp = 16,
> + .planes = 3,
> + .hsub = 2,
> + }, {
> + .fourcc = DRM_FORMAT_YUV444,
> + .v4l2 = V4L2_PIX_FMT_YUV444M,
> + .bpp = 24,
> + .planes = 3,
> + .hsub = 1,
> + }, {
> + .fourcc = DRM_FORMAT_YVU444,
> + .v4l2 = V4L2_PIX_FMT_YVU444M,
> + .bpp = 24,
> + .planes = 3,
> + .hsub = 1,
> + }, {
> + .fourcc = DRM_FORMAT_Y210,
> + .v4l2 = V4L2_PIX_FMT_Y210,
> + .bpp = 32,
> + .planes = 1,
> + .hsub = 2,
> + }, {
> + .fourcc = DRM_FORMAT_Y212,
> + .v4l2 = V4L2_PIX_FMT_Y212,
> + .bpp = 32,
> + .planes = 1,
> + .hsub = 2,
> + },
> +};
> +
> +const struct rzg2l_du_format_info *rzg2l_du_format_info(u32 fourcc)
> +{
> + unsigned int i;
> +
> + for (i = 0; i < ARRAY_SIZE(rzg2l_du_format_infos); ++i) {
> + if (rzg2l_du_format_infos[i].fourcc == fourcc)
> + return &rzg2l_du_format_infos[i];
> + }
> +
> + return NULL;
> +}
> +
> +/* -----------------------------------------------------------------------------
> + * Frame buffer
> + */
> +
> +static const struct drm_gem_object_funcs rzg2l_du_gem_funcs = {
> + .free = drm_gem_dma_object_free,
> + .print_info = drm_gem_dma_object_print_info,
> + .get_sg_table = drm_gem_dma_object_get_sg_table,
> + .vmap = drm_gem_dma_object_vmap,
> + .mmap = drm_gem_dma_object_mmap,
> + .vm_ops = &drm_gem_dma_vm_ops,
> +};
> +
> +struct drm_gem_object *
> +rzg2l_du_gem_prime_import_sg_table(struct drm_device *dev,
> + struct dma_buf_attachment *attach,
> + struct sg_table *sgt)
> +{
> + struct drm_gem_dma_object *dma_obj;
> + struct drm_gem_object *gem_obj;
> + int ret;
> +
> + /* Create a DMA GEM buffer. */
> + dma_obj = kzalloc(sizeof(*dma_obj), GFP_KERNEL);
> + if (!dma_obj)
> + return ERR_PTR(-ENOMEM);
> +
> + gem_obj = &dma_obj->base;
> + gem_obj->funcs = &rzg2l_du_gem_funcs;
> +
> + drm_gem_private_object_init(dev, gem_obj, attach->dmabuf->size);
> + dma_obj->map_noncoherent = false;
> +
> + ret = drm_gem_create_mmap_offset(gem_obj);
> + if (ret) {
> + drm_gem_object_release(gem_obj);
> + kfree(dma_obj);
> + return ERR_PTR(ret);
> + }
> +
> + dma_obj->dma_addr = 0;
> + dma_obj->sgt = sgt;
> +
> + return gem_obj;
> +}
> +
> +int rzg2l_du_dumb_create(struct drm_file *file, struct drm_device *dev,
> + struct drm_mode_create_dumb *args)
> +{
> + unsigned int min_pitch = DIV_ROUND_UP(args->width * args->bpp, 8);
> + unsigned int align = 16 * args->bpp / 8;
> +
> + args->pitch = roundup(min_pitch, align);
> +
> + return drm_gem_dma_dumb_create_internal(file, dev, args);
> +}
> +
> +static struct drm_framebuffer *
> +rzg2l_du_fb_create(struct drm_device *dev, struct drm_file *file_priv,
> + const struct drm_mode_fb_cmd2 *mode_cmd)
> +{
> + const struct rzg2l_du_format_info *format;
> + unsigned int chroma_pitch;
> + unsigned int max_pitch;
> + unsigned int align;
> + unsigned int i;
> +
> + format = rzg2l_du_format_info(mode_cmd->pixel_format);
> + if (!format) {
> + dev_dbg(dev->dev, "unsupported pixel format %p4cc\n",
> + &mode_cmd->pixel_format);
> + return ERR_PTR(-EINVAL);
> + }
> +
> + /*
> + * On Gen3 the memory interface is handled by the VSP that limits the
> + * pitch to 65535 bytes and has no alignment constraint.
> + */
> + max_pitch = 65535;
> + align = 1;
> +
> + if (mode_cmd->pitches[0] & (align - 1) ||
> + mode_cmd->pitches[0] > max_pitch) {
> + dev_dbg(dev->dev, "invalid pitch value %u\n",
> + mode_cmd->pitches[0]);
> + return ERR_PTR(-EINVAL);
> + }
> +
> + /*
> + * Calculate the chroma plane(s) pitch using the horizontal subsampling
> + * factor. For semi-planar formats, the U and V planes are combined, the
> + * pitch must thus be doubled.
> + */
> + chroma_pitch = mode_cmd->pitches[0] / format->hsub;
> + if (format->planes == 2)
> + chroma_pitch *= 2;
> +
> + for (i = 1; i < format->planes; ++i) {
> + if (mode_cmd->pitches[i] != chroma_pitch) {
> + dev_dbg(dev->dev,
> + "luma and chroma pitches are not compatible\n");
> + return ERR_PTR(-EINVAL);
> + }
> + }
> +
> + return drm_gem_fb_create(dev, file_priv, mode_cmd);
> +}
> +
> +/* -----------------------------------------------------------------------------
> + * Atomic Check and Update
> + */
> +
> +static void rzg2l_du_atomic_commit_tail(struct drm_atomic_state *old_state)
> +{
> + struct drm_device *dev = old_state->dev;
> + struct rzg2l_du_device *rcdu = to_rzg2l_du_device(dev);
> + struct drm_crtc_state *crtc_state;
> + struct drm_crtc *crtc;
> + unsigned int i;
> +
> + /*
> + * Store RGB routing to DPAD0, the hardware will be configured
> + * when starting the CRTCs.
> + */
> + for_each_new_crtc_in_state(old_state, crtc, crtc_state, i) {
> + struct rzg2l_du_crtc_state *rcrtc_state =
> + to_rzg2l_crtc_state(crtc_state);
> + struct rzg2l_du_crtc *rcrtc = to_rzg2l_crtc(crtc);
> +
> + if (rcrtc_state->outputs & BIT(RZG2L_DU_OUTPUT_DPAD0))
> + rcdu->dpad0_source = rcrtc->index;
> + }
> +
> + /* Apply the atomic update. */
> + drm_atomic_helper_commit_modeset_disables(dev, old_state);
> + drm_atomic_helper_commit_planes(dev, old_state,
> + DRM_PLANE_COMMIT_ACTIVE_ONLY);
> + drm_atomic_helper_commit_modeset_enables(dev, old_state);
> +
> + drm_atomic_helper_commit_hw_done(old_state);
> + drm_atomic_helper_wait_for_flip_done(dev, old_state);
> +
> + drm_atomic_helper_cleanup_planes(dev, old_state);
> +}
> +
> +/* -----------------------------------------------------------------------------
> + * Initialization
> + */
> +
> +static const struct drm_mode_config_helper_funcs rzg2l_du_mode_config_helper = {
> + .atomic_commit_tail = rzg2l_du_atomic_commit_tail,
> +};
> +
> +static const struct drm_mode_config_funcs rzg2l_du_mode_config_funcs = {
> + .fb_create = rzg2l_du_fb_create,
> + .atomic_check = drm_atomic_helper_check,
> + .atomic_commit = drm_atomic_helper_commit,
> +};
> +
> +static int rzg2l_du_encoders_init_one(struct rzg2l_du_device *rcdu,
> + enum rzg2l_du_output output,
> + struct of_endpoint *ep)
> +{
> + struct device_node *entity;
> + int ret;
> +
> + /* Locate the connected entity and initialize the encoder. */
> + entity = of_graph_get_remote_port_parent(ep->local_node);
> + if (!entity) {
> + dev_dbg(rcdu->dev, "unconnected endpoint %pOF, skipping\n",
> + ep->local_node);
> + return -ENODEV;
> + }
> +
> + if (!of_device_is_available(entity)) {
> + dev_dbg(rcdu->dev,
> + "connected entity %pOF is disabled, skipping\n",
> + entity);
> + of_node_put(entity);
> + return -ENODEV;
> + }
> +
> + ret = rzg2l_du_encoder_init(rcdu, output, entity);
> + if (ret && ret != -EPROBE_DEFER && ret != -ENOLINK)
> + dev_warn(rcdu->dev,
> + "failed to initialize encoder %pOF on output %s (%d), skipping\n",
> + entity, rzg2l_du_output_name(output), ret);
> +
> + of_node_put(entity);
> +
> + return ret;
> +}
> +
> +static int rzg2l_du_encoders_init(struct rzg2l_du_device *rcdu)
> +{
> + struct device_node *np = rcdu->dev->of_node;
> + struct device_node *ep_node;
> + unsigned int num_encoders = 0;
> +
> + /*
> + * Iterate over the endpoints and create one encoder for each output
> + * pipeline.
> + */
> + for_each_endpoint_of_node(np, ep_node) {
> + enum rzg2l_du_output output;
> + struct of_endpoint ep;
> + unsigned int i;
> + int ret;
> +
> + ret = of_graph_parse_endpoint(ep_node, &ep);
> + if (ret < 0) {
> + of_node_put(ep_node);
> + return ret;
> + }
> +
> + /* Find the output route corresponding to the port number. */
> + for (i = 0; i < RZG2L_DU_OUTPUT_MAX; ++i) {
> + if (rcdu->info->routes[i].possible_crtcs &&
> + rcdu->info->routes[i].port == ep.port) {
> + output = i;
> + break;
> + }
> + }
> +
> + if (i == RZG2L_DU_OUTPUT_MAX) {
> + dev_warn(rcdu->dev,
> + "port %u references unexisting output, skipping\n",
> + ep.port);
> + continue;
> + }
> +
> + /* Process the output pipeline. */
> + ret = rzg2l_du_encoders_init_one(rcdu, output, &ep);
> + if (ret < 0) {
> + if (ret == -EPROBE_DEFER) {
> + of_node_put(ep_node);
> + return ret;
> + }
> +
> + continue;
> + }
> +
> + num_encoders++;
> + }
> +
> + return num_encoders;
> +}
> +
> +static int rzg2l_du_properties_init(struct rzg2l_du_device *rcdu)
> +{
> + /*
> + * The color key is expressed as an RGB888 triplet stored in a 32-bit
> + * integer in XRGB8888 format. Bit 24 is used as a flag to disable (0)
> + * or enable source color keying (1).
> + */
> + rcdu->props.colorkey =
> + drm_property_create_range(&rcdu->ddev, 0, "colorkey",
> + 0, 0x01ffffff);
> + if (!rcdu->props.colorkey)
> + return -ENOMEM;
> +
> + return 0;
> +}
> +
> +static int rzg2l_du_vsps_init(struct rzg2l_du_device *rcdu)
> +{
> + const struct device_node *np = rcdu->dev->of_node;
> + const char *vsps_prop_name = "renesas,vsps";
> + struct of_phandle_args args;
> + struct {
> + struct device_node *np;
> + unsigned int crtcs_mask;
> + } vsps[RZG2L_DU_MAX_VSPS] = { { NULL, }, };
> + unsigned int vsps_count = 0;
> + unsigned int cells;
> + unsigned int i;
> + int ret;
> +
> + /*
> + * First parse the DT vsps property to populate the list of VSPs. Each
> + * entry contains a pointer to the VSP DT node and a bitmask of the
> + * connected DU CRTCs.
> + */
> + ret = of_property_count_u32_elems(np, vsps_prop_name);
> + if (ret < 0) {
> + /* Backward compatibility with old DTBs. */
> + vsps_prop_name = "vsps";
> + ret = of_property_count_u32_elems(np, vsps_prop_name);
> + }
> + cells = ret / rcdu->num_crtcs - 1;
> + if (cells > 1)
> + return -EINVAL;
> +
> + for (i = 0; i < rcdu->num_crtcs; ++i) {
> + unsigned int j;
> +
> + ret = of_parse_phandle_with_fixed_args(np, vsps_prop_name,
> + cells, i, &args);
> + if (ret < 0)
> + goto error;
> +
> + /*
> + * Add the VSP to the list or update the corresponding existing
> + * entry if the VSP has already been added.
> + */
> + for (j = 0; j < vsps_count; ++j) {
> + if (vsps[j].np == args.np)
> + break;
> + }
> +
> + if (j < vsps_count)
> + of_node_put(args.np);
> + else
> + vsps[vsps_count++].np = args.np;
> +
> + vsps[j].crtcs_mask |= BIT(i);
> +
> + /*
> + * Store the VSP pointer and pipe index in the CRTC. If the
> + * second cell of the 'renesas,vsps' specifier isn't present,
> + * default to 0 to remain compatible with older DT bindings.
> + */
> + rcdu->crtcs[i].vsp = &rcdu->vsps[j];
> + rcdu->crtcs[i].vsp_pipe = cells >= 1 ? args.args[0] : 0;
> + }
> +
> + /*
> + * Then initialize all the VSPs from the node pointers and CRTCs bitmask
> + * computed previously.
> + */
> + for (i = 0; i < vsps_count; ++i) {
> + struct rzg2l_du_vsp *vsp = &rcdu->vsps[i];
> +
> + vsp->index = i;
> + vsp->dev = rcdu;
> +
> + ret = rzg2l_du_vsp_init(vsp, vsps[i].np, vsps[i].crtcs_mask);
> + if (ret < 0)
> + goto error;
> + }
> +
> + return 0;
> +
> +error:
> + for (i = 0; i < ARRAY_SIZE(vsps); ++i)
> + of_node_put(vsps[i].np);
> +
> + return ret;
> +}
> +
> +int rzg2l_du_modeset_init(struct rzg2l_du_device *rcdu)
> +{
> + struct drm_device *dev = &rcdu->ddev;
> + struct drm_encoder *encoder;
> + unsigned int dpad0_sources;
> + unsigned int num_encoders;
> + int ret;
> +
> + ret = drmm_mode_config_init(dev);
> + if (ret)
> + return ret;
> +
> + dev->mode_config.min_width = 0;
> + dev->mode_config.min_height = 0;
> + dev->mode_config.normalize_zpos = true;
> + dev->mode_config.funcs = &rzg2l_du_mode_config_funcs;
> + dev->mode_config.helper_private = &rzg2l_du_mode_config_helper;
> +
> + /*
> + * The RZ DU uses the VSP1 for memory access, and is limited
> + * to frame sizes of 1920x1080.
> + */
> + dev->mode_config.max_width = 1920;
> + dev->mode_config.max_height = 1080;
> +
> + rcdu->num_crtcs = hweight8(rcdu->info->channels_mask);
> +
> + ret = rzg2l_du_properties_init(rcdu);
> + if (ret < 0)
> + return ret;
> +
> + /*
> + * Initialize vertical blanking interrupts handling. Start with vblank
> + * disabled for all CRTCs.
> + */
> + ret = drm_vblank_init(dev, rcdu->num_crtcs);
> + if (ret < 0)
> + return ret;
> +
> + /* Initialize the compositors. */
> + ret = rzg2l_du_vsps_init(rcdu);
> + if (ret < 0)
> + return ret;
> +
> + /* Create the CRTCs. */
> + ret = rzg2l_du_crtc_create(rcdu);
> + if (ret < 0)
> + return ret;
> +
> + /* Initialize the encoders. */
> + ret = rzg2l_du_encoders_init(rcdu);
> + if (ret < 0)
> + return ret;
> +
> + if (ret == 0) {
> + dev_err(rcdu->dev, "error: no encoder could be initialized\n");
> + return -EINVAL;
> + }
> +
> + num_encoders = ret;
> +
> + /*
> + * Set the possible CRTCs and possible clones. There's always at least
> + * one way for all encoders to clone each other, set all bits in the
> + * possible clones field.
> + */
> + list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
> + struct rzg2l_du_encoder *renc = to_rzg2l_encoder(encoder);
> + const struct rzg2l_du_output_routing *route =
> + &rcdu->info->routes[renc->output];
> +
> + encoder->possible_crtcs = route->possible_crtcs;
> + encoder->possible_clones = (1 << num_encoders) - 1;
> + }
> +
> + /*
> + * Initialize the default DPAD0 source to the index of the first DU
> + * channel that can be connected to DPAD0. The exact value doesn't
> + * matter as it should be overwritten by mode setting for the RGB
> + * output, but it is nonetheless required to ensure a valid initial
> + * hardware configuration on Gen3 where DU0 can't always be connected to
> + * DPAD0.
> + */
> + dpad0_sources = rcdu->info->routes[RZG2L_DU_OUTPUT_DPAD0].possible_crtcs;
> + rcdu->dpad0_source = ffs(dpad0_sources) - 1;
> +
> + drm_mode_config_reset(dev);
> +
> + drm_kms_helper_poll_init(dev);
> +
> + return 0;
> +}
> diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.h b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.h
> new file mode 100644
> index 000000000000..876e97cfbf45
> --- /dev/null
> +++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.h
> @@ -0,0 +1,43 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * RZ/G2L Display Unit Mode Setting
> + *
> + * Copyright (C) 2023 Renesas Electronics Corporation
> + *
> + * Based on rcar_du_kms.h
> + */
> +
> +#ifndef __RZG2L_DU_KMS_H__
> +#define __RZG2L_DU_KMS_H__
> +
> +#include <linux/types.h>
> +
> +struct dma_buf_attachment;
> +struct drm_file;
> +struct drm_device;
> +struct drm_gem_object;
> +struct drm_mode_create_dumb;
> +struct rzg2l_du_device;
> +struct sg_table;
> +
> +struct rzg2l_du_format_info {
> + u32 fourcc;
> + u32 v4l2;
> + unsigned int bpp;
> + unsigned int planes;
> + unsigned int hsub;
> +};
> +
> +const struct rzg2l_du_format_info *rzg2l_du_format_info(u32 fourcc);
> +
> +int rzg2l_du_modeset_init(struct rzg2l_du_device *rcdu);
> +
> +int rzg2l_du_dumb_create(struct drm_file *file, struct drm_device *dev,
> + struct drm_mode_create_dumb *args);
> +
> +struct drm_gem_object *
> +rzg2l_du_gem_prime_import_sg_table(struct drm_device *dev,
> + struct dma_buf_attachment *attach,
> + struct sg_table *sgt);
> +
> +#endif /* __RZG2L_DU_KMS_H__ */
> diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_regs.h b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_regs.h
> new file mode 100644
> index 000000000000..a0ca05abb5a8
> --- /dev/null
> +++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_regs.h
> @@ -0,0 +1,67 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * RZ/G2L Display Unit Registers Definitions
> + *
> + * Copyright (C) 2023 Renesas Electronics Corporation
> + *
> + */
> +
> +#ifndef __RZG2L_DU_REGS_H__
> +#define __RZG2L_DU_REGS_H__
> +
> +/* -----------------------------------------------------------------------------
> + * Display Control Registers
> + */
> +
> +#define DU_MCR0 0x00
> +#define DU_MCR0_DPI_OE BIT(0)
> +#define DU_MCR0_DI_EN BIT(8)
> +#define DU_MCR0_PB_CLR BIT(16)
> +
> +#define DU_MSR0 0x04
> +#define DU_MSR0_ST_DI_BSY BIT(8)
> +#define DU_MSR0_ST_PB_WFULL BIT(16)
> +#define DU_MSR0_ST_PB_WINIT BIT(18)
> +#define DU_MSR0_ST_PB_REMPTY BIT(20)
> +#define DU_MSR0_ST_PB_RUF BIT(21)
> +#define DU_MSR0_ST_PB_RINIT BIT(22)
> +
> +#define DU_MSR1 0x08
> +
> +#define DU_IMR0 0x0c
> +#define DU_MSR0_IM_PB_RUF BIT(0)
> +
> +#define DU_DITR0 0x10
> +#define DU_DITR0_DPI_CLKMD BIT(0)
> +#define DU_DITR0_DEMD_LOW 0x0
> +#define DU_DITR0_DEMD_HIGH (BIT(8) | BIT(9))
> +#define DU_DITR0_VSPOL BIT(16)
> +#define DU_DITR0_HSPOL BIT(17)
> +
> +#define DU_DITR1 0x14
> +#define DU_DITR1_VSA(x) ((x) << 0)
> +#define DU_DITR1_VACTIVE(x) ((x) << 16)
> +
> +#define DU_DITR2 0x18
> +#define DU_DITR2_VBP(x) ((x) << 0)
> +#define DU_DITR2_VFP(x) ((x) << 16)
> +
> +#define DU_DITR3 0x1c
> +#define DU_DITR3_HSA(x) ((x) << 0)
> +#define DU_DITR3_HACTIVE(x) ((x) << 16)
> +
> +#define DU_DITR4 0x20
> +#define DU_DITR4_HBP(x) ((x) << 0)
> +#define DU_DITR4_HFP(x) ((x) << 16)
> +
> +#define DU_DITR5 0x24
> +#define DU_DITR5_VSFT(x) ((x) << 0)
> +#define DU_DITR5_HSFT(x) ((x) << 16)
> +
> +#define DU_MCR1 0x40
> +#define DU_MCR1_PB_AUTOCLR BIT(16)
> +
> +#define DU_PBCR0 0x4c
> +#define DU_PBCR0_PB_DEP(x) ((x) << 0)
> +
> +#endif /* __RZG2L_DU_REGS_H__ */
> diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.c b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.c
> new file mode 100644
> index 000000000000..3ba21754428e
> --- /dev/null
> +++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.c
> @@ -0,0 +1,430 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * RZ/G2L Display Unit VSP-Based Compositor
> + *
> + * Copyright (C) 2023 Renesas Electronics Corporation
> + *
> + * Based on rcar_du_vsp.c
> + */
> +
> +#include <drm/drm_atomic.h>
> +#include <drm/drm_atomic_helper.h>
> +#include <drm/drm_blend.h>
> +#include <drm/drm_crtc.h>
> +#include <drm/drm_fb_dma_helper.h>
> +#include <drm/drm_fourcc.h>
> +#include <drm/drm_framebuffer.h>
> +#include <drm/drm_gem_atomic_helper.h>
> +#include <drm/drm_gem_dma_helper.h>
> +#include <drm/drm_managed.h>
> +#include <drm/drm_vblank.h>
> +
> +#include <linux/bitops.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/of_platform.h>
> +#include <linux/scatterlist.h>
> +
> +#include <media/vsp1.h>
> +
> +#include "rzg2l_du_drv.h"
> +#include "rzg2l_du_kms.h"
> +#include "rzg2l_du_vsp.h"
> +
> +static void rzg2l_du_vsp_complete(void *private, unsigned int status, u32 crc)
> +{
> + struct rzg2l_du_crtc *crtc = private;
> +
> + if (crtc->vblank_enable)
> + drm_crtc_handle_vblank(&crtc->crtc);
> +
> + if (status & VSP1_DU_STATUS_COMPLETE)
> + rzg2l_du_crtc_finish_page_flip(crtc);
> +
> + drm_crtc_add_crc_entry(&crtc->crtc, false, 0, &crc);
> +}
> +
> +void rzg2l_du_vsp_enable(struct rzg2l_du_crtc *crtc)
> +{
> + const struct drm_display_mode *mode = &crtc->crtc.state->adjusted_mode;
> + struct vsp1_du_lif_config cfg = {
> + .width = mode->hdisplay,
> + .height = mode->vdisplay,
> + .interlaced = mode->flags & DRM_MODE_FLAG_INTERLACE,
> + .callback = rzg2l_du_vsp_complete,
> + .callback_data = crtc,
> + };
> +
> + vsp1_du_setup_lif(crtc->vsp->vsp, crtc->vsp_pipe, &cfg);
> +}
> +
> +void rzg2l_du_vsp_disable(struct rzg2l_du_crtc *crtc)
> +{
> + vsp1_du_setup_lif(crtc->vsp->vsp, crtc->vsp_pipe, NULL);
> +}
> +
> +void rzg2l_du_vsp_atomic_begin(struct rzg2l_du_crtc *crtc)
> +{
> + vsp1_du_atomic_begin(crtc->vsp->vsp, crtc->vsp_pipe);
> +}
> +
> +void rzg2l_du_vsp_atomic_flush(struct rzg2l_du_crtc *crtc)
> +{
> + struct vsp1_du_atomic_pipe_config cfg = { { 0, } };
> + struct rzg2l_du_crtc_state *state;
> +
> + state = to_rzg2l_crtc_state(crtc->crtc.state);
> + cfg.crc = state->crc;
> +
> + vsp1_du_atomic_flush(crtc->vsp->vsp, crtc->vsp_pipe, &cfg);
> +}
> +
> +static const u32 rzg2l_du_vsp_formats[] = {
> + DRM_FORMAT_RGB332,
> + DRM_FORMAT_ARGB4444,
> + DRM_FORMAT_XRGB4444,
> + DRM_FORMAT_ARGB1555,
> + DRM_FORMAT_XRGB1555,
> + DRM_FORMAT_RGB565,
> + DRM_FORMAT_BGR888,
> + DRM_FORMAT_RGB888,
> + DRM_FORMAT_BGRA8888,
> + DRM_FORMAT_BGRX8888,
> + DRM_FORMAT_ARGB8888,
> + DRM_FORMAT_XRGB8888,
> + DRM_FORMAT_UYVY,
> + DRM_FORMAT_YUYV,
> + DRM_FORMAT_YVYU,
> + DRM_FORMAT_NV12,
> + DRM_FORMAT_NV21,
> + DRM_FORMAT_NV16,
> + DRM_FORMAT_NV61,
> + DRM_FORMAT_YUV420,
> + DRM_FORMAT_YVU420,
> + DRM_FORMAT_YUV422,
> + DRM_FORMAT_YVU422,
> + DRM_FORMAT_YUV444,
> + DRM_FORMAT_YVU444,
> +};
> +
> +static void rzg2l_du_vsp_plane_setup(struct rzg2l_du_vsp_plane *plane)
> +{
> + struct rzg2l_du_vsp_plane_state *state =
> + to_rzg2l_vsp_plane_state(plane->plane.state);
> + struct rzg2l_du_crtc *crtc = to_rzg2l_crtc(state->state.crtc);
> + struct drm_framebuffer *fb = plane->plane.state->fb;
> + const struct rzg2l_du_format_info *format;
> + struct vsp1_du_atomic_config cfg = {
> + .pixelformat = 0,
> + .pitch = fb->pitches[0],
> + .alpha = state->state.alpha >> 8,
> + .zpos = state->state.zpos,
> + };
> + u32 fourcc = state->format->fourcc;
> + unsigned int i;
> +
> + cfg.src.left = state->state.src.x1 >> 16;
> + cfg.src.top = state->state.src.y1 >> 16;
> + cfg.src.width = drm_rect_width(&state->state.src) >> 16;
> + cfg.src.height = drm_rect_height(&state->state.src) >> 16;
> +
> + cfg.dst.left = state->state.dst.x1;
> + cfg.dst.top = state->state.dst.y1;
> + cfg.dst.width = drm_rect_width(&state->state.dst);
> + cfg.dst.height = drm_rect_height(&state->state.dst);
> +
> + for (i = 0; i < state->format->planes; ++i)
> + cfg.mem[i] = sg_dma_address(state->sg_tables[i].sgl)
> + + fb->offsets[i];
> +
> + if (state->state.pixel_blend_mode == DRM_MODE_BLEND_PIXEL_NONE) {
> + switch (fourcc) {
> + case DRM_FORMAT_ARGB1555:
> + fourcc = DRM_FORMAT_XRGB1555;
> + break;
> +
> + case DRM_FORMAT_ARGB4444:
> + fourcc = DRM_FORMAT_XRGB4444;
> + break;
> +
> + case DRM_FORMAT_ARGB8888:
> + fourcc = DRM_FORMAT_XRGB8888;
> + break;
> + }
> + }
> +
> + format = rzg2l_du_format_info(fourcc);
> + cfg.pixelformat = format->v4l2;
> +
> + cfg.premult = state->state.pixel_blend_mode == DRM_MODE_BLEND_PREMULTI;
> +
> + vsp1_du_atomic_update(plane->vsp->vsp, crtc->vsp_pipe,
> + plane->index, &cfg);
> +}
> +
> +int rzg2l_du_vsp_map_fb(struct rzg2l_du_vsp *vsp, struct drm_framebuffer *fb,
> + struct sg_table sg_tables[3])
> +{
> + struct rzg2l_du_device *rcdu = vsp->dev;
> + unsigned int i, j;
> + int ret;
> +
> + for (i = 0; i < fb->format->num_planes; ++i) {
> + struct drm_gem_dma_object *gem = drm_fb_dma_get_gem_obj(fb, i);
> + struct sg_table *sgt = &sg_tables[i];
> +
> + if (gem->sgt) {
> + struct scatterlist *src;
> + struct scatterlist *dst;
> +
> + /*
> + * If the GEM buffer has a scatter gather table, it has
> + * been imported from a dma-buf and has no physical
> + * address as it might not be physically contiguous.
> + * Copy the original scatter gather table to map it to
> + * the VSP.
> + */
> + ret = sg_alloc_table(sgt, gem->sgt->orig_nents,
> + GFP_KERNEL);
> + if (ret)
> + goto fail;
> +
> + src = gem->sgt->sgl;
> + dst = sgt->sgl;
> + for (j = 0; j < gem->sgt->orig_nents; ++j) {
> + sg_set_page(dst, sg_page(src), src->length,
> + src->offset);
> + src = sg_next(src);
> + dst = sg_next(dst);
> + }
> + } else {
> + ret = dma_get_sgtable(rcdu->dev, sgt, gem->vaddr,
> + gem->dma_addr, gem->base.size);
> + if (ret)
> + goto fail;
> + }
> +
> + ret = vsp1_du_map_sg(vsp->vsp, sgt);
> + if (ret) {
> + sg_free_table(sgt);
> + goto fail;
> + }
> + }
> +
> + return 0;
> +
> +fail:
> + while (i--) {
> + struct sg_table *sgt = &sg_tables[i];
> +
> + vsp1_du_unmap_sg(vsp->vsp, sgt);
> + sg_free_table(sgt);
> + }
> +
> + return ret;
> +}
> +
> +static int rzg2l_du_vsp_plane_prepare_fb(struct drm_plane *plane,
> + struct drm_plane_state *state)
> +{
> + struct rzg2l_du_vsp_plane_state *rstate = to_rzg2l_vsp_plane_state(state);
> + struct rzg2l_du_vsp *vsp = to_rzg2l_vsp_plane(plane)->vsp;
> + int ret;
> +
> + /*
> + * There's no need to prepare (and unprepare) the framebuffer when the
> + * plane is not visible, as it will not be displayed.
> + */
> + if (!state->visible)
> + return 0;
> +
> + ret = rzg2l_du_vsp_map_fb(vsp, state->fb, rstate->sg_tables);
> + if (ret < 0)
> + return ret;
> +
> + return drm_gem_plane_helper_prepare_fb(plane, state);
> +}
> +
> +void rzg2l_du_vsp_unmap_fb(struct rzg2l_du_vsp *vsp, struct drm_framebuffer *fb,
> + struct sg_table sg_tables[3])
> +{
> + unsigned int i;
> +
> + for (i = 0; i < fb->format->num_planes; ++i) {
> + struct sg_table *sgt = &sg_tables[i];
> +
> + vsp1_du_unmap_sg(vsp->vsp, sgt);
> + sg_free_table(sgt);
> + }
> +}
> +
> +static void rzg2l_du_vsp_plane_cleanup_fb(struct drm_plane *plane,
> + struct drm_plane_state *state)
> +{
> + struct rzg2l_du_vsp_plane_state *rstate = to_rzg2l_vsp_plane_state(state);
> + struct rzg2l_du_vsp *vsp = to_rzg2l_vsp_plane(plane)->vsp;
> +
> + if (!state->visible)
> + return;
> +
> + rzg2l_du_vsp_unmap_fb(vsp, state->fb, rstate->sg_tables);
> +}
> +
> +static int rzg2l_du_vsp_plane_atomic_check(struct drm_plane *plane,
> + struct drm_atomic_state *state)
> +{
> + struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state,
> + plane);
> + struct rzg2l_du_vsp_plane_state *rstate = to_rzg2l_vsp_plane_state(new_plane_state);
> +
> + return __rzg2l_du_crtc_plane_atomic_check(plane, new_plane_state, &rstate->format);
> +}
> +
> +static void rzg2l_du_vsp_plane_atomic_update(struct drm_plane *plane,
> + struct drm_atomic_state *state)
> +{
> + struct drm_plane_state *old_state = drm_atomic_get_old_plane_state(state, plane);
> + struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state, plane);
> + struct rzg2l_du_vsp_plane *rplane = to_rzg2l_vsp_plane(plane);
> + struct rzg2l_du_crtc *crtc = to_rzg2l_crtc(old_state->crtc);
> +
> + if (new_state->visible)
> + rzg2l_du_vsp_plane_setup(rplane);
> + else if (old_state->crtc)
> + vsp1_du_atomic_update(rplane->vsp->vsp, crtc->vsp_pipe,
> + rplane->index, NULL);
> +}
> +
> +static const struct drm_plane_helper_funcs rzg2l_du_vsp_plane_helper_funcs = {
> + .prepare_fb = rzg2l_du_vsp_plane_prepare_fb,
> + .cleanup_fb = rzg2l_du_vsp_plane_cleanup_fb,
> + .atomic_check = rzg2l_du_vsp_plane_atomic_check,
> + .atomic_update = rzg2l_du_vsp_plane_atomic_update,
> +};
> +
> +static struct drm_plane_state *
> +rzg2l_du_vsp_plane_atomic_duplicate_state(struct drm_plane *plane)
> +{
> + struct rzg2l_du_vsp_plane_state *copy;
> +
> + if (WARN_ON(!plane->state))
> + return NULL;
> +
> + copy = kzalloc(sizeof(*copy), GFP_KERNEL);
> + if (!copy)
> + return NULL;
> +
> + __drm_atomic_helper_plane_duplicate_state(plane, ©->state);
> +
> + return ©->state;
> +}
> +
> +static void rzg2l_du_vsp_plane_atomic_destroy_state(struct drm_plane *plane,
> + struct drm_plane_state *state)
> +{
> + __drm_atomic_helper_plane_destroy_state(state);
> + kfree(to_rzg2l_vsp_plane_state(state));
> +}
> +
> +static void rzg2l_du_vsp_plane_reset(struct drm_plane *plane)
> +{
> + struct rzg2l_du_vsp_plane_state *state;
> +
> + if (plane->state) {
> + rzg2l_du_vsp_plane_atomic_destroy_state(plane, plane->state);
> + plane->state = NULL;
> + }
> +
> + state = kzalloc(sizeof(*state), GFP_KERNEL);
> + if (!state)
> + return;
> +
> + __drm_atomic_helper_plane_reset(plane, &state->state);
> +}
> +
> +static const struct drm_plane_funcs rzg2l_du_vsp_plane_funcs = {
> + .update_plane = drm_atomic_helper_update_plane,
> + .disable_plane = drm_atomic_helper_disable_plane,
> + .reset = rzg2l_du_vsp_plane_reset,
> + .destroy = drm_plane_cleanup,
> + .atomic_duplicate_state = rzg2l_du_vsp_plane_atomic_duplicate_state,
> + .atomic_destroy_state = rzg2l_du_vsp_plane_atomic_destroy_state,
> +};
> +
> +static void rzg2l_du_vsp_cleanup(struct drm_device *dev, void *res)
> +{
> + struct rzg2l_du_vsp *vsp = res;
> + unsigned int i;
> +
> + for (i = 0; i < vsp->num_planes; ++i) {
> + struct rzg2l_du_vsp_plane *plane = &vsp->planes[i];
> +
> + drm_plane_cleanup(&plane->plane);
> + }
> +
> + kfree(vsp->planes);
> +
> + put_device(vsp->vsp);
> +}
> +
> +int rzg2l_du_vsp_init(struct rzg2l_du_vsp *vsp, struct device_node *np,
> + unsigned int crtcs)
> +{
> + struct rzg2l_du_device *rcdu = vsp->dev;
> + struct platform_device *pdev;
> + unsigned int num_crtcs = hweight32(crtcs);
> + unsigned int num_planes = 2;
> + unsigned int i;
> + int ret;
> +
> + /* Find the VSP device and initialize it. */
> + pdev = of_find_device_by_node(np);
> + if (!pdev)
> + return -ENXIO;
> +
> + vsp->vsp = &pdev->dev;
> +
> + ret = drmm_add_action_or_reset(&rcdu->ddev, rzg2l_du_vsp_cleanup, vsp);
> + if (ret < 0)
> + return ret;
> +
> + ret = vsp1_du_init(vsp->vsp);
> + if (ret < 0)
> + return ret;
> +
> + vsp->planes = kcalloc(num_planes, sizeof(*vsp->planes), GFP_KERNEL);
> + if (!vsp->planes)
> + return -ENOMEM;
> +
> + for (i = 0; i < num_planes; ++i) {
> + enum drm_plane_type type = i < num_crtcs
> + ? DRM_PLANE_TYPE_PRIMARY
> + : DRM_PLANE_TYPE_OVERLAY;
> + struct rzg2l_du_vsp_plane *plane = &vsp->planes[i];
> +
> + plane->vsp = vsp;
> + plane->index = i;
> + ret = drm_universal_plane_init(&rcdu->ddev, &plane->plane,
> + crtcs, &rzg2l_du_vsp_plane_funcs,
> + rzg2l_du_vsp_formats,
> + ARRAY_SIZE(rzg2l_du_vsp_formats),
> + NULL, type, NULL);
> + if (ret < 0)
> + return ret;
> +
> + drm_plane_helper_add(&plane->plane,
> + &rzg2l_du_vsp_plane_helper_funcs);
> +
> + drm_plane_create_alpha_property(&plane->plane);
> + drm_plane_create_zpos_property(&plane->plane, i, 0,
> + num_planes - 1);
> +
> + drm_plane_create_blend_mode_property(&plane->plane,
> + BIT(DRM_MODE_BLEND_PIXEL_NONE) |
> + BIT(DRM_MODE_BLEND_PREMULTI) |
> + BIT(DRM_MODE_BLEND_COVERAGE));
> +
> + vsp->num_planes++;
> + }
> +
> + return 0;
> +}
> diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.h b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.h
> new file mode 100644
> index 000000000000..3eb9708f60c7
> --- /dev/null
> +++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.h
> @@ -0,0 +1,94 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * RZ/G2L Display Unit VSP-Based Compositor
> + *
> + * Copyright (C) 2023 Renesas Electronics Corporation
> + *
> + * Based on rcar_du_vsp.h
> + */
> +
> +#ifndef __RZG2L_DU_VSP_H__
> +#define __RZG2L_DU_VSP_H__
> +
> +#include <drm/drm_plane.h>
> +
> +struct drm_framebuffer;
> +struct rzg2l_du_format_info;
> +struct rzg2l_du_vsp;
> +struct sg_table;
There are a few forward declarations missing, for struct device and
struct rzg2l_du_device.
struct sg_table is embedded in rzg2l_du_vsp_plane_state, so you should
include the header, not forward-declare it.
> +
> +struct rzg2l_du_vsp_plane {
> + struct drm_plane plane;
> + struct rzg2l_du_vsp *vsp;
> + unsigned int index;
> +};
> +
> +struct rzg2l_du_vsp {
> + unsigned int index;
> + struct device *vsp;
> + struct rzg2l_du_device *dev;
> + struct rzg2l_du_vsp_plane *planes;
> + unsigned int num_planes;
> +};
> +
> +static inline struct rzg2l_du_vsp_plane *to_rzg2l_vsp_plane(struct drm_plane *p)
> +{
> + return container_of(p, struct rzg2l_du_vsp_plane, plane);
Please include the header required by container_of().
> +}
> +
> +/**
> + * struct rzg2l_du_vsp_plane_state - Driver-specific plane state
> + * @state: base DRM plane state
> + * @format: information about the pixel format used by the plane
> + * @sg_tables: scatter-gather tables for the frame buffer memory
> + */
> +struct rzg2l_du_vsp_plane_state {
> + struct drm_plane_state state;
> +
> + const struct rzg2l_du_format_info *format;
> + struct sg_table sg_tables[3];
> +};
> +
> +static inline struct rzg2l_du_vsp_plane_state *
> +to_rzg2l_vsp_plane_state(struct drm_plane_state *state)
> +{
> + return container_of(state, struct rzg2l_du_vsp_plane_state, state);
> +}
> +
> +#ifdef CONFIG_DRM_RCAR_VSP
> +int rzg2l_du_vsp_init(struct rzg2l_du_vsp *vsp, struct device_node *np,
> + unsigned int crtcs);
> +void rzg2l_du_vsp_enable(struct rzg2l_du_crtc *crtc);
> +void rzg2l_du_vsp_disable(struct rzg2l_du_crtc *crtc);
> +void rzg2l_du_vsp_atomic_begin(struct rzg2l_du_crtc *crtc);
> +void rzg2l_du_vsp_atomic_flush(struct rzg2l_du_crtc *crtc);
> +int rzg2l_du_vsp_map_fb(struct rzg2l_du_vsp *vsp, struct drm_framebuffer *fb,
> + struct sg_table sg_tables[3]);
> +void rzg2l_du_vsp_unmap_fb(struct rzg2l_du_vsp *vsp, struct drm_framebuffer *fb,
> + struct sg_table sg_tables[3]);
> +#else
> +static inline int rzg2l_du_vsp_init(struct rzg2l_du_vsp *vsp, struct device_node *np,
> + unsigned int crtcs)
> +{
> + return -ENXIO;
> +}
> +
> +static inline void rzg2l_du_vsp_enable(struct rzg2l_du_crtc *crtc) { };
> +static inline void rzg2l_du_vsp_disable(struct rzg2l_du_crtc *crtc) { };
> +static inline void rzg2l_du_vsp_atomic_begin(struct rzg2l_du_crtc *crtc) { };
> +static inline void rzg2l_du_vsp_atomic_flush(struct rzg2l_du_crtc *crtc) { };
> +static inline int rzg2l_du_vsp_map_fb(struct rzg2l_du_vsp *vsp,
> + struct drm_framebuffer *fb,
> + struct sg_table sg_tables[3])
> +{
> + return -ENXIO;
> +}
> +
> +static inline void rzg2l_du_vsp_unmap_fb(struct rzg2l_du_vsp *vsp,
> + struct drm_framebuffer *fb,
> + struct sg_table sg_tables[3])
> +{
> +}
> +#endif
> +
> +#endif /* __RZG2L_DU_VSP_H__ */
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v9 RESEND 0/5] Add RZ/{G2L,G2LC} and RZ/V2L Display Unit support
2023-05-29 14:22 ` Biju Das
@ 2023-05-29 15:45 ` Laurent Pinchart
2023-06-01 12:12 ` Biju Das
0 siblings, 1 reply; 20+ messages in thread
From: Laurent Pinchart @ 2023-05-29 15:45 UTC (permalink / raw)
To: Biju Das
Cc: David Airlie, Daniel Vetter, Philipp Zabel, Geert Uytterhoeven,
Kieran Bingham, dri-devel, linux-renesas-soc, Fabrizio Castro,
Prabhakar Mahadev Lad, linux-kernel
On Mon, May 29, 2023 at 02:22:06PM +0000, Biju Das wrote:
> HI Laurent,
>
> Thanks for the feedback.
>
> > Subject: Re: [PATCH v9 RESEND 0/5] Add RZ/{G2L,G2LC} and RZ/V2L Display
> > Unit support
> >
> > Hi Biju,
> >
> > On Thu, May 25, 2023 at 02:30:10PM +0000, Biju Das wrote:
> > > Hi DRM maintainers,
> > >
> > > Gentle ping.
> >
> > Sorry, I was on holidays the last two weeks.
> >
> > > Are we happy with moving all Renesas drm drivers to Renesas specific
> > > directory or preference is for separate one??
> >
> > This works for me.
> >
> > > If it is later, I can send RZ/G2L drm driver separate.
> > >
> > > Otherwise, I need to rebase and resend.
> >
> > Your series applies cleanly on top of the latest drm-next branch. Is
> > there a specific need to rebase and resend ?
>
> Nope. After my patch series there were
> some patches from Geert for drm/shmobile merged to drm-misc-next by Thomas.
>
> Maybe git managed this automatically??
Probably, git is nice :-)
> > I haven't had time to review patch 4/5 (the driver) yet. All the rest
> > looks good to me. Should I already include 1/5 in my next pull request ?
>
> Yes, please.
OK, I will do so. I've reviewed 4/5 in the meantime, but changes are
needed, so I won't wait for v10 before applying 1/5.
> > > Please let me know your preference.
> > >
> > > Cheers,
> > > Biju
> > >
> > >
> > > > -----Original Message-----
> > > > From: Biju Das
> > > > Sent: Monday, May 15, 2023 8:58 AM
> > > > To: David Airlie <airlied@gmail.com>; Daniel Vetter
> > > > <daniel@ffwll.ch>; Philipp Zabel <p.zabel@pengutronix.de>; Geert
> > > > Uytterhoeven <geert+renesas@glider.be>; Laurent Pinchart
> > > > <laurent.pinchart@ideasonboard.com>; Kieran Bingham
> > > > <kieran.bingham+renesas@ideasonboard.com>
> > > > Cc: dri-devel@lists.freedesktop.org;
> > > > linux-renesas-soc@vger.kernel.org;
> > > > Fabrizio Castro <fabrizio.castro.jz@renesas.com>; Prabhakar Mahadev
> > > > Lad <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > > > Subject: RE: [PATCH v9 RESEND 0/5] Add RZ/{G2L,G2LC} and RZ/V2L
> > > > Display Unit support
> > > >
> > > > Hi All,
> > > >
> > > > Gentle ping. Are we happy with this patch series?
> > > >
> > > > Cheers,
> > > > Biju
> > > >
> > > > > Subject: [PATCH v9 RESEND 0/5] Add RZ/{G2L,G2LC} and RZ/V2L
> > > > > Display Unit support
> > > > >
> > > > > RZ/G2L LCD controller composed of Frame compression
> > > > > Processor(FCPVD), Video signal processor (VSPD) and Display
> > > > > unit(DU). The output of LCDC is connected to Display parallel
> > > > > interface and MIPI link video interface.
> > > > >
> > > > > The output from DSI is connected to ADV7535.
> > > > >
> > > > > Created a vendor specific directory renesas and moved all renesas
> > > > > drm drivers to it (rcar-du and shmobile). Then added support for
> > > > > RZ/G2L DU DRM driver by creating rz_du directory.
> > > > >
> > > > > Ref:
> > > > >
> > > > >
> > > > > v8->v9:
> > > > > * Added Rb tag from Laurent and Acked-by tag from Kieran for
> > patch#1.
> > > > > * Added Rb tag from Laurent and Geert for patch#3.
> > > > > * Dropped reset_control_assert() from error patch for
> > > > > rzg2l_du_crtc_get() as
> > > > > suggested by Philipp Zabel.
> > > > > * Added Rb tag from Laurent oatch#5.
> > > > > * Updated MAINTAINERS entries for common parts(Makefile and
> > Kconfig).
> > > > > v7->v8:
> > > > > * Moved rcar-du and shmobile DRM drivers to renesas specific
> > > > > vendor directory.
> > > > > * Fixed the typo vsp2->du in RZ/V2L DU bindings patch.
> > > > > * Added Rb tag from Rob for RZ/V2L DU bindings patch.
> > > > > * Dropped RCar du lib and created RZ/G2L DU DRM driver by
> > > > > creating rz_du folder.
> > > > > * Updated MAINTAINERS entries.
> > > > > v6->v7:
> > > > > * Split DU lib and RZ/G2L du driver as separate patch series as
> > > > > DU support added to more platforms based on RZ/G2L alike SoCs.
> > > > > * Rebased to latest drm-tip.
> > > > > * Added patch #2 for binding support for RZ/V2L DU
> > > > > * Added patch #4 for driver support for RZ/V2L DU
> > > > > * Added patch #5 for SoC DTSI support for RZ/G2L DU
> > > > > * Added patch #6 for SoC DTSI support for RZ/V2L DU
> > > > > * Added patch #7 for Enabling DU on SMARC EVK based on
> > > > > RZ/{G2L,V2L} SoCs.
> > > > > * Added patch #8 for Enabling DU on SMARC EVK based on RZ/G2LC
> > SoC.
> > > > > v5->v6:
> > > > > * Merged DU lib and RZ/G2L du driver in same patch series
> > > > > * Rebased to latest drm-misc.
> > > > > * Merged patch#1 to RZ/G2L Driver patch.
> > > > > * Updated KConfig dependency from ARCH_RENESAS->ARCH_RZG2L.
> > > > > * Optimized rzg2l_du_output_name() by removing unsupported
> > outputs.
> > > > >
> > > > > v4->v5:
> > > > > * Added Rb tag from Rob for binding patch.
> > > > > * Started using RCar DU libs(kms, vsp and encoder)
> > > > > * Started using rcar_du_device, rcar_du_write, rcar_du_crtc,
> > > > > rcar_du_format_info and rcar_du_encoder.
> > > > > v3->v4:
> > > > > * Changed compatible name from
> > > > > renesas,du-r9a07g044->renesas,r9a07g044-
> > > > > du
> > > > > * started using same compatible for RZ/G2{L,LC}
> > > > > * Removed rzg2l_du_group.h and struct rzg2l_du_group
> > > > > * Renamed __rzg2l_du_group_start_stop->rzg2l_du_start_stop
> > > > > * Removed rzg2l_du_group_restart
> > > > > * Updated rzg2l_du_crtc_set_display_timing
> > > > > * Removed mode_valid callback.
> > > > > * Updated rzg2l_du_crtc_create() parameters
> > > > > * Updated compatible
> > > > > * Removed RZG2L_DU_MAX_GROUPS
> > > > > V2->v3:
> > > > > * Added new bindings for RZ/G2L DU
> > > > > * Removed indirection and created new DRM driver based on R-Car
> > > > > DU
> > > > > v1->v2:
> > > > > * Based on [1], all references to 'rzg2l_lcdc' replaced with
> > > > 'rzg2l_du'
> > > > > * Updated commit description for bindings
> > > > > * Removed LCDC references from bindings
> > > > > * Changed clock name from du.0->aclk from bindings
> > > > > * Changed reset name from du.0->du from bindings
> > > > > * Replaced crtc_helper_funcs->rcar_crtc_helper_funcs
> > > > > * Updated macro DRM_RZG2L_LCDC->DRM_RZG2L_DU
> > > > > * Replaced rzg2l-lcdc-drm->rzg2l-du-drm
> > > > > * Added forward declaration for struct reset_control
> > > > >
> > > > > [1]
> > > > >
> > > > > Biju Das (5):
> > > > > drm: Place Renesas drivers in a separate dir
> > > > > dt-bindings: display: Document Renesas RZ/G2L DU bindings
> > > > > dt-bindings: display: renesas,rzg2l-du: Document RZ/V2L DU
> > bindings
> > > > > drm: Add RZ/G2L DU Support
> > > > > MAINTAINERS: Add maintainer for RZ DU drivers
> > > > >
> > > > > .../bindings/display/renesas,rzg2l-du.yaml | 129 +++
> > > > > MAINTAINERS | 16 +-
> > > > > drivers/gpu/drm/Kconfig | 4 +-
> > > > > drivers/gpu/drm/Makefile | 3 +-
> > > > > drivers/gpu/drm/renesas/Kconfig | 5 +
> > > > > drivers/gpu/drm/renesas/Makefile | 5 +
> > > > > drivers/gpu/drm/{ => renesas}/rcar-du/Kconfig | 0
> > > > > .../gpu/drm/{ => renesas}/rcar-du/Makefile | 0
> > > > > .../gpu/drm/{ => renesas}/rcar-du/rcar_cmm.c | 0
> > > > > .../gpu/drm/{ => renesas}/rcar-du/rcar_cmm.h | 0
> > > > > .../drm/{ => renesas}/rcar-du/rcar_du_crtc.c | 0
> > > > > .../drm/{ => renesas}/rcar-du/rcar_du_crtc.h | 0
> > > > > .../drm/{ => renesas}/rcar-du/rcar_du_drv.c | 0
> > > > > .../drm/{ => renesas}/rcar-du/rcar_du_drv.h | 0
> > > > > .../{ => renesas}/rcar-du/rcar_du_encoder.c | 0
> > > > > .../{ => renesas}/rcar-du/rcar_du_encoder.h | 0
> > > > > .../drm/{ => renesas}/rcar-du/rcar_du_group.c | 0
> > > > > .../drm/{ => renesas}/rcar-du/rcar_du_group.h | 0
> > > > > .../drm/{ => renesas}/rcar-du/rcar_du_kms.c | 0
> > > > > .../drm/{ => renesas}/rcar-du/rcar_du_kms.h | 0
> > > > > .../drm/{ => renesas}/rcar-du/rcar_du_plane.c | 0
> > > > > .../drm/{ => renesas}/rcar-du/rcar_du_plane.h | 0
> > > > > .../drm/{ => renesas}/rcar-du/rcar_du_regs.h | 0
> > > > > .../drm/{ => renesas}/rcar-du/rcar_du_vsp.c | 0
> > > > > .../drm/{ => renesas}/rcar-du/rcar_du_vsp.h | 0
> > > > > .../{ => renesas}/rcar-du/rcar_du_writeback.c | 0
> > > > > .../{ => renesas}/rcar-du/rcar_du_writeback.h | 0
> > > > > .../drm/{ => renesas}/rcar-du/rcar_dw_hdmi.c | 0
> > > > > .../gpu/drm/{ => renesas}/rcar-du/rcar_lvds.c | 0
> > > > > .../gpu/drm/{ => renesas}/rcar-du/rcar_lvds.h | 0
> > > > > .../{ => renesas}/rcar-du/rcar_lvds_regs.h | 0
> > > > > .../drm/{ => renesas}/rcar-du/rcar_mipi_dsi.c | 0
> > > > > .../drm/{ => renesas}/rcar-du/rcar_mipi_dsi.h | 0
> > > > > .../rcar-du/rcar_mipi_dsi_regs.h | 0
> > > > > .../{ => renesas}/rcar-du/rzg2l_mipi_dsi.c | 0
> > > > > .../rcar-du/rzg2l_mipi_dsi_regs.h | 0
> > > > > drivers/gpu/drm/renesas/rz-du/Kconfig | 20 +
> > > > > drivers/gpu/drm/renesas/rz-du/Makefile | 8 +
> > > > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c | 714
> > > > > ++++++++++++++++ drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.h |
> > > > > 99 +++ drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c | 188 +++++
> > > > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h | 89 ++
> > > > > .../gpu/drm/renesas/rz-du/rzg2l_du_encoder.c | 112 +++
> > > > > .../gpu/drm/renesas/rz-du/rzg2l_du_encoder.h | 28 +
> > > > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.c | 770
> > > > > ++++++++++++++++++ drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.h |
> > > > > 43 + drivers/gpu/drm/renesas/rz-du/rzg2l_du_regs.h | 67 ++
> > > > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.c | 430 ++++++++++
> > > > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.h | 94 +++
> > > > > .../gpu/drm/{ => renesas}/shmobile/Kconfig | 0
> > > > > .../gpu/drm/{ => renesas}/shmobile/Makefile | 0
> > > > > .../shmobile/shmob_drm_backlight.c | 0
> > > > > .../shmobile/shmob_drm_backlight.h | 0
> > > > > .../{ => renesas}/shmobile/shmob_drm_crtc.c | 0
> > > > > .../{ => renesas}/shmobile/shmob_drm_crtc.h | 0
> > > > > .../{ => renesas}/shmobile/shmob_drm_drv.c | 0
> > > > > .../{ => renesas}/shmobile/shmob_drm_drv.h | 0
> > > > > .../{ => renesas}/shmobile/shmob_drm_kms.c | 0
> > > > > .../{ => renesas}/shmobile/shmob_drm_kms.h | 0
> > > > > .../{ => renesas}/shmobile/shmob_drm_plane.c | 0
> > > > > .../{ => renesas}/shmobile/shmob_drm_plane.h | 0
> > > > > .../{ => renesas}/shmobile/shmob_drm_regs.h | 0
> > > > > 62 files changed, 2816 insertions(+), 8 deletions(-) create mode
> > > > > 100644
> > > > > Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml
> > > > > create mode 100644 drivers/gpu/drm/renesas/Kconfig create mode
> > > > > 100644 drivers/gpu/drm/renesas/Makefile rename drivers/gpu/drm/{
> > > > > => renesas}/rcar-du/Kconfig (100%) rename drivers/gpu/drm/{ =>
> > > > > renesas}/rcar-du/Makefile (100%) rename drivers/gpu/drm/{ =>
> > > > > renesas}/rcar-du/rcar_cmm.c (100%) rename drivers/gpu/drm/{ =>
> > > > > renesas}/rcar-du/rcar_cmm.h (100%) rename drivers/gpu/drm/{ =>
> > > > > renesas}/rcar-du/rcar_du_crtc.c (100%) rename drivers/gpu/drm/{
> > > > > => renesas}/rcar-du/rcar_du_crtc.h (100%) rename
> > > > > drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_drv.c (100%) rename
> > > > > drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_drv.h (100%) rename
> > > > > drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_encoder.c (100%)
> > > > > rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_encoder.h
> > > > > (100%) rename drivers/gpu/drm/{ =>
> > > > > renesas}/rcar-du/rcar_du_group.c (100%) rename drivers/gpu/drm/{
> > > > > => renesas}/rcar-du/rcar_du_group.h (100%) rename
> > > > > drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_kms.c (100%) rename
> > > > > drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_kms.h (100%) rename
> > > > > drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_plane.c (100%)
> > > > > rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_plane.h
> > > > > (100%) rename drivers/gpu/drm/{ =>
> > > > > renesas}/rcar-du/rcar_du_regs.h (100%) rename drivers/gpu/drm/{
> > > > > => renesas}/rcar-du/rcar_du_vsp.c (100%) rename drivers/gpu/drm/{
> > > > > => renesas}/rcar-du/rcar_du_vsp.h (100%) rename drivers/gpu/drm/{
> > > > > => renesas}/rcar-du/rcar_du_writeback.c (100%) rename
> > > > > drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_writeback.h (100%)
> > > > > rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_dw_hdmi.c (100%)
> > > > > rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_lvds.c (100%)
> > > > > rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_lvds.h (100%)
> > > > > rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_lvds_regs.h
> > > > > (100%) rename drivers/gpu/drm/{ =>
> > > > > renesas}/rcar-du/rcar_mipi_dsi.c (100%) rename drivers/gpu/drm/{
> > > > > => renesas}/rcar-du/rcar_mipi_dsi.h (100%) rename
> > > > > drivers/gpu/drm/{ => renesas}/rcar-du/rcar_mipi_dsi_regs.h (100%)
> > > > > rename drivers/gpu/drm/{ => renesas}/rcar-du/rzg2l_mipi_dsi.c
> > > > > (100%) rename drivers/gpu/drm/{ =>
> > > > > renesas}/rcar-du/rzg2l_mipi_dsi_regs.h
> > > > > (100%) create mode 100644 drivers/gpu/drm/renesas/rz-du/Kconfig
> > > > > create mode 100644 drivers/gpu/drm/renesas/rz-du/Makefile
> > > > > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c
> > > > > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.h
> > > > > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c
> > > > > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h
> > > > > create mode 100644
> > > > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.c
> > > > > create mode 100644
> > > > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.h
> > > > > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.c
> > > > > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.h
> > > > > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_regs.h
> > > > > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.c
> > > > > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.h
> > > > > rename drivers/gpu/drm/{ => renesas}/shmobile/Kconfig (100%)
> > > > > rename drivers/gpu/drm/{ => renesas}/shmobile/Makefile (100%)
> > > > > rename drivers/gpu/drm/{ =>
> > > > > renesas}/shmobile/shmob_drm_backlight.c (100%) rename
> > > > > drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_backlight.h
> > > > > (100%) rename drivers/gpu/drm/{ =>
> > > > > renesas}/shmobile/shmob_drm_crtc.c
> > > > > (100%) rename drivers/gpu/drm/{ =>
> > > > > renesas}/shmobile/shmob_drm_crtc.h
> > > > > (100%) rename drivers/gpu/drm/{ =>
> > > > > renesas}/shmobile/shmob_drm_drv.c
> > > > > (100%) rename drivers/gpu/drm/{ =>
> > > > > renesas}/shmobile/shmob_drm_drv.h
> > > > > (100%) rename drivers/gpu/drm/{ =>
> > > > > renesas}/shmobile/shmob_drm_kms.c
> > > > > (100%) rename drivers/gpu/drm/{ =>
> > > > > renesas}/shmobile/shmob_drm_kms.h
> > > > > (100%) rename drivers/gpu/drm/{ =>
> > > > > renesas}/shmobile/shmob_drm_plane.c
> > > > > (100%) rename drivers/gpu/drm/{ =>
> > > > > renesas}/shmobile/shmob_drm_plane.h
> > > > > (100%) rename drivers/gpu/drm/{ =>
> > > > > renesas}/shmobile/shmob_drm_regs.h
> > > > > (100%)
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 20+ messages in thread
* RE: [PATCH v9 RESEND 4/5] drm: Add RZ/G2L DU Support
2023-05-29 15:43 ` Laurent Pinchart
@ 2023-06-01 12:08 ` Biju Das
2023-06-02 11:34 ` Laurent Pinchart
0 siblings, 1 reply; 20+ messages in thread
From: Biju Das @ 2023-06-01 12:08 UTC (permalink / raw)
To: Laurent Pinchart
Cc: David Airlie, Daniel Vetter, Philipp Zabel, Kieran Bingham,
dri-devel, linux-renesas-soc, Geert Uytterhoeven,
Fabrizio Castro, Prabhakar Mahadev Lad
Hi Laurent,
Thanks for the feedback.
> Subject: Re: [PATCH v9 RESEND 4/5] drm: Add RZ/G2L DU Support
>
> Hi Biju,
>
> Thank you for the patch.
>
> This is a partial review, because the driver is big, and because some
> changes in v10 will (hopefully) simplify the code and make review
> easier.
I agree v10 will simplify the code as I have do clean-ups based on your
review commnet.
>
> On Tue, May 02, 2023 at 11:09:11AM +0100, Biju Das wrote:
> > The LCD controller is composed of Frame Compression Processor (FCPVD),
> > Video Signal Processor (VSPD), and Display Unit (DU).
> >
> > It has DPI/DSI interfaces and supports a maximum resolution of 1080p
> > along with 2 RPFs to support the blending of two picture layers and
> > raster operations (ROPs).
> >
> > The DU module is connected to VSPD. Add RZ/G2L DU support for RZ/G2L
> > alike SoCs.
> >
> > Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
> > ---
> > Ref:
> >
> > v8->v9:
> > * Dropped reset_control_assert() from error patch for
> rzg2l_du_crtc_get() as
> > suggested by Philipp Zabel.
> > v7->v8:
> > * Dropped RCar du lib and created RZ/G2L DU DRM driver by creating
> rz_du folder.
> > * Updated KConfig and Makefile.
> > v6->v7:
> > * Split DU lib and RZ/G2L du driver as separate patch series as
> > DU support added to more platforms based on RZ/G2L alike SoCs.
> > * Rebased to latest drm-tip.
> > * Added patch #2 for binding support for RZ/V2L DU
> > * Added patch #4 for driver support for RZ/V2L DU
> > * Added patch #5 for SoC DTSI support for RZ/G2L DU
> > * Added patch #6 for SoC DTSI support for RZ/V2L DU
> > * Added patch #7 for Enabling DU on SMARC EVK based on RZ/{G2L,V2L}
> SoCs.
> > * Added patch #8 for Enabling DU on SMARC EVK based on RZ/G2LC SoC.
> > ---
> > drivers/gpu/drm/renesas/Kconfig | 1 +
> > drivers/gpu/drm/renesas/Makefile | 1 +
> > drivers/gpu/drm/renesas/rz-du/Kconfig | 20 +
> > drivers/gpu/drm/renesas/rz-du/Makefile | 8 +
> > drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c | 714 ++++++++++++++++
> > drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.h | 99 +++
> > drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c | 188 +++++
> > drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h | 89 ++
> > .../gpu/drm/renesas/rz-du/rzg2l_du_encoder.c | 112 +++
> > .../gpu/drm/renesas/rz-du/rzg2l_du_encoder.h | 28 +
> > drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.c | 770
> ++++++++++++++++++
> > drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.h | 43 +
> > drivers/gpu/drm/renesas/rz-du/rzg2l_du_regs.h | 67 ++
> > drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.c | 430 ++++++++++
> > drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.h | 94 +++
> > 15 files changed, 2664 insertions(+)
> > create mode 100644 drivers/gpu/drm/renesas/rz-du/Kconfig
> > create mode 100644 drivers/gpu/drm/renesas/rz-du/Makefile
> > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c
> > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.h
> > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c
> > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h
> > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.c
> > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.h
> > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.c
> > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.h
> > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_regs.h
> > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.c
> > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.h
> >
> > diff --git a/drivers/gpu/drm/renesas/Kconfig
> b/drivers/gpu/drm/renesas/Kconfig
> > index 3777dad17f81..21862a8ef710 100644
> > --- a/drivers/gpu/drm/renesas/Kconfig
> > +++ b/drivers/gpu/drm/renesas/Kconfig
> > @@ -1,4 +1,5 @@
> > # SPDX-License-Identifier: GPL-2.0-only
> >
> > source "drivers/gpu/drm/renesas/rcar-du/Kconfig"
> > +source "drivers/gpu/drm/renesas/rz-du/Kconfig"
> > source "drivers/gpu/drm/renesas/shmobile/Kconfig"
> > diff --git a/drivers/gpu/drm/renesas/Makefile
> b/drivers/gpu/drm/renesas/Makefile
> > index ec0e89e7a592..b8d8bc53967f 100644
> > --- a/drivers/gpu/drm/renesas/Makefile
> > +++ b/drivers/gpu/drm/renesas/Makefile
> > @@ -1,4 +1,5 @@
> > # SPDX-License-Identifier: GPL-2.0
> >
> > obj-y += rcar-du/
> > +obj-y += rz-du/
> > obj-$(CONFIG_DRM_SHMOBILE) += shmobile/
> > diff --git a/drivers/gpu/drm/renesas/rz-du/Kconfig
> b/drivers/gpu/drm/renesas/rz-du/Kconfig
> > new file mode 100644
> > index 000000000000..90b1bf72e23b
> > --- /dev/null
> > +++ b/drivers/gpu/drm/renesas/rz-du/Kconfig
> > @@ -0,0 +1,20 @@
> > +# SPDX-License-Identifier: GPL-2.0
> > +config DRM_RZG2L_DU
> > + tristate "DRM Support for RZ/G2L Display Unit"
> > + depends on DRM && OF
> > + depends on ARM64
>
> Does the driver fail to compile on !ARM64 platforms ? If no, I'd drop
> this.
Agreed.
>
> > + depends on DRM_RCAR_VSP
> > + depends on ARCH_RZG2L || COMPILE_TEST
> > + select DRM_KMS_HELPER
> > + select DRM_GEM_DMA_HELPER
>
> Alphabetical order please.
Ok.
>
> > + select VIDEOMODE_HELPERS
> > + help
> > + Choose this option if you have an RZ/G2L alike chipset.
> > + If M is selected the module will be called rzg2l-du-drm.
> > +
> > +config DRM_RCAR_VSP
> > + bool "R-Car DU VSP Compositor Support" if ARM
> > + default y if ARM64
> > + depends on VIDEO_RENESAS_VSP1
> > + help
> > + Enable support to expose the R-Car VSP Compositor as KMS planes.
>
> This duplicates the config symbol in
> drivers/gpu/drm/renesas/rcar-du/Kconfig.
>
> Unlike on R-Car, where some SoC generations can operate without the VSP,
> RZ/G2L requires the VSP. You can drop this configuration option and just
> make DRM_RZG2L_DU depend on VIDEO_RENESAS_VSP1.
OK, Will make DRM_RZG2L_DU depend on VIDEO_RENESAS_VSP1.
>
> > diff --git a/drivers/gpu/drm/renesas/rz-du/Makefile
> b/drivers/gpu/drm/renesas/rz-du/Makefile
> > new file mode 100644
> > index 000000000000..2cdf3ccd0459
> > --- /dev/null
> > +++ b/drivers/gpu/drm/renesas/rz-du/Makefile
> > @@ -0,0 +1,8 @@
> > +# SPDX-License-Identifier: GPL-2.0
> > +rzg2l-du-drm-y := rzg2l_du_crtc.o \
> > + rzg2l_du_drv.o \
> > + rzg2l_du_encoder.o \
> > + rzg2l_du_kms.o \
> > +
> > +rzg2l-du-drm-$(CONFIG_DRM_RCAR_VSP) += rzg2l_du_vsp.o
> > +obj-$(CONFIG_DRM_RZG2L_DU) += rzg2l-du-drm.o
> > diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c
> b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c
> > new file mode 100644
> > index 000000000000..d61d433d72e6
> > --- /dev/null
> > +++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c
> > @@ -0,0 +1,714 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * RZ/G2L Display Unit CRTCs
> > + *
> > + * Copyright (C) 2023 Renesas Electronics Corporation
> > + *
> > + * Based on rcar_du_crtc.c
> > + */
> > +
> > +#include <linux/clk.h>
> > +#include <linux/mutex.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/reset.h>
> > +
> > +#include <drm/drm_atomic.h>
> > +#include <drm/drm_atomic_helper.h>
> > +#include <drm/drm_bridge.h>
> > +#include <drm/drm_crtc.h>
> > +#include <drm/drm_device.h>
> > +#include <drm/drm_framebuffer.h>
> > +#include <drm/drm_gem_dma_helper.h>
> > +#include <drm/drm_vblank.h>
> > +
> > +#include "rzg2l_du_crtc.h"
> > +#include "rzg2l_du_drv.h"
> > +#include "rzg2l_du_encoder.h"
> > +#include "rzg2l_du_kms.h"
> > +#include "rzg2l_du_vsp.h"
> > +#include "rzg2l_du_regs.h"
> > +
> > +/* ------------------------------------------------------------------
> -----------
> > + * Hardware Setup
> > + */
> > +
> > +static void rzg2l_du_crtc_set_display_timing(struct rzg2l_du_crtc
> *rcrtc)
> > +{
> > + const struct drm_display_mode *mode = &rcrtc->crtc.state-
> >adjusted_mode;
> > + struct rzg2l_du_device *rcdu = rcrtc->dev;
> > + unsigned long mode_clock = mode->clock * 1000;
> > + u32 ditr0, ditr1, ditr2, ditr3, ditr4, ditr5, pbcr0;
> > + struct clk *parent_clk;
> > +
> > + parent_clk = clk_get_parent(rcrtc->rzg2l_clocks.dclk);
> > + clk_set_rate(parent_clk, mode_clock);
>
> Shouldn't the clock framework configure the parent correctly if you set
> the dclk rate ?
Yes it will do.
>
> > +
> > + clk_prepare_enable(rcrtc->rzg2l_clocks.dclk);
> > +
> > + ditr0 = (DU_DITR0_DEMD_HIGH
> > + | ((mode->flags & DRM_MODE_FLAG_PVSYNC) ? DU_DITR0_VSPOL :
> 0)
> > + | ((mode->flags & DRM_MODE_FLAG_PHSYNC) ? DU_DITR0_HSPOL :
> 0));
>
> No need for the outer parentheses.
>
> I usually align the | under the =, but that's up to you.
OK will align | under the =
>
> > +
> > + ditr1 = DU_DITR1_VSA(mode->vsync_end - mode->vsync_start)
> > + | DU_DITR1_VACTIVE(mode->vdisplay);
> > +
> > + ditr2 = DU_DITR2_VBP(mode->vtotal - mode->vsync_end)
> > + | DU_DITR2_VFP(mode->vsync_start - mode->vdisplay);
> > +
> > + ditr3 = DU_DITR3_HSA(mode->hsync_end - mode->hsync_start)
> > + | DU_DITR3_HACTIVE(mode->hdisplay);
> > +
> > + ditr4 = DU_DITR4_HBP(mode->htotal - mode->hsync_end)
> > + | DU_DITR4_HFP(mode->hsync_start - mode->hdisplay);
> > +
> > + ditr5 = DU_DITR5_VSFT(0) | DU_DITR5_HSFT(0);
> > +
> > + pbcr0 = DU_PBCR0_PB_DEP(0x1f);
> > +
> > + writel(ditr0, rcdu->mmio + DU_DITR0);
>
> Please implement read/write wrappers that take an rcdu pointer and add
> the offset. It will simplify the callers.
I have implemented write as there is no user for read.
>
> > + writel(ditr1, rcdu->mmio + DU_DITR1);
> > + writel(ditr2, rcdu->mmio + DU_DITR2);
> > + writel(ditr3, rcdu->mmio + DU_DITR3);
> > + writel(ditr4, rcdu->mmio + DU_DITR4);
> > + writel(ditr5, rcdu->mmio + DU_DITR5);
> > + writel(pbcr0, rcdu->mmio + DU_PBCR0);
> > +
> > + /* Enable auto resume when underrun */
> > + writel(DU_MCR1_PB_AUTOCLR, rcdu->mmio + DU_MCR1);
> > +}
> > +
> > +/* ------------------------------------------------------------------
> -----------
> > + * Page Flip
> > + */
> > +
> > +void rzg2l_du_crtc_finish_page_flip(struct rzg2l_du_crtc *rcrtc)
> > +{
> > + struct drm_pending_vblank_event *event;
> > + struct drm_device *dev = rcrtc->crtc.dev;
> > + unsigned long flags;
> > +
> > + spin_lock_irqsave(&dev->event_lock, flags);
> > + event = rcrtc->event;
> > + rcrtc->event = NULL;
> > + spin_unlock_irqrestore(&dev->event_lock, flags);
> > +
> > + if (!event)
> > + return;
> > +
> > + spin_lock_irqsave(&dev->event_lock, flags);
> > + drm_crtc_send_vblank_event(&rcrtc->crtc, event);
> > + wake_up(&rcrtc->flip_wait);
> > + spin_unlock_irqrestore(&dev->event_lock, flags);
> > +
> > + drm_crtc_vblank_put(&rcrtc->crtc);
> > +}
> > +
> > +static bool rzg2l_du_crtc_page_flip_pending(struct rzg2l_du_crtc
> *rcrtc)
> > +{
> > + struct drm_device *dev = rcrtc->crtc.dev;
> > + unsigned long flags;
> > + bool pending;
> > +
> > + spin_lock_irqsave(&dev->event_lock, flags);
> > + pending = rcrtc->event;
> > + spin_unlock_irqrestore(&dev->event_lock, flags);
> > +
> > + return pending;
> > +}
> > +
> > +static void rzg2l_du_crtc_wait_page_flip(struct rzg2l_du_crtc *rcrtc)
> > +{
> > + struct rzg2l_du_device *rcdu = rcrtc->dev;
> > +
> > + if (wait_event_timeout(rcrtc->flip_wait,
> > + !rzg2l_du_crtc_page_flip_pending(rcrtc),
> > + msecs_to_jiffies(50)))
> > + return;
> > +
> > + dev_warn(rcdu->dev, "page flip timeout\n");
> > +
> > + rzg2l_du_crtc_finish_page_flip(rcrtc);
> > +}
> > +
> > +/* ------------------------------------------------------------------
> -----------
> > + * Start/Stop and Suspend/Resume
> > + */
> > +
> > +static void rzg2l_du_crtc_setup(struct rzg2l_du_crtc *rcrtc)
> > +{
> > + /* Configure display timings and output routing */
> > + rzg2l_du_crtc_set_display_timing(rcrtc);
> > +
> > + /* Enable the VSP compositor. */
> > + rzg2l_du_vsp_enable(rcrtc);
> > +
> > + /* Turn vertical blanking interrupt reporting on. */
> > + drm_crtc_vblank_on(&rcrtc->crtc);
> > +}
> > +
> > +static int rzg2l_du_crtc_get(struct rzg2l_du_crtc *rcrtc)
> > +{
> > + int ret;
> > +
> > + /*
> > + * Guard against double-get, as the function is called from both
> the
> > + * .atomic_enable() and .atomic_begin() handlers.
> > + */
> > + if (rcrtc->initialized)
> > + return 0;
> > +
> > + ret = clk_prepare_enable(rcrtc->rzg2l_clocks.aclk);
> > + if (ret < 0)
> > + return ret;
> > +
> > + ret = clk_prepare_enable(rcrtc->rzg2l_clocks.pclk);
> > + if (ret < 0)
> > + goto error_bus_clock;
> > +
> > + ret = reset_control_deassert(rcrtc->rstc);
> > + if (ret < 0)
> > + goto error_peri_clock;
> > +
> > + rzg2l_du_crtc_setup(rcrtc);
> > + rcrtc->initialized = true;
> > +
> > + return 0;
> > +
> > +error_peri_clock:
> > + clk_disable_unprepare(rcrtc->rzg2l_clocks.pclk);
> > +error_bus_clock:
> > + clk_disable_unprepare(rcrtc->rzg2l_clocks.aclk);
> > + return ret;
> > +}
> > +
> > +static void rzg2l_du_crtc_put(struct rzg2l_du_crtc *rcrtc)
> > +{
> > + clk_disable_unprepare(rcrtc->rzg2l_clocks.dclk);
> > + reset_control_assert(rcrtc->rstc);
> > + clk_disable_unprepare(rcrtc->rzg2l_clocks.pclk);
> > + clk_disable_unprepare(rcrtc->rzg2l_clocks.aclk);
> > +
> > + rcrtc->initialized = false;
> > +}
> > +
> > +static void rzg2l_du_start_stop(struct rzg2l_du_crtc *rcrtc, bool
> start)
> > +{
> > + struct rzg2l_du_device *rcdu = rcrtc->dev;
> > +
> > + writel(start ? DU_MCR0_DI_EN : 0, rcdu->mmio + DU_MCR0);
> > +}
> > +
> > +static void rzg2l_du_crtc_start(struct rzg2l_du_crtc *rcrtc)
> > +{
> > + rzg2l_du_start_stop(rcrtc, true);
> > +}
> > +
> > +static void rzg2l_du_crtc_disable_planes(struct rzg2l_du_crtc *rcrtc)
> > +{
> > + struct rzg2l_du_device *rcdu = rcrtc->dev;
> > + struct drm_crtc *crtc = &rcrtc->crtc;
> > +
> > + /* Make sure vblank interrupts are enabled. */
> > + drm_crtc_vblank_get(crtc);
> > +
> > + if (!wait_event_timeout(rcrtc->vblank_wait, rcrtc->vblank_count ==
> 0,
> > + msecs_to_jiffies(100)))
> > + dev_warn(rcdu->dev, "vertical blanking timeout\n");
> > +
> > + drm_crtc_vblank_put(crtc);
>
> This while function seems dubious given that vblank_count is never set
> to a non-zero value. I think you need to revisit the CRTC enable/disable
> code to match the needs of your hardware, which seems to be different
> than what the R-Car DU needs.
OK, will drop this function.
>
> > +}
> > +
> > +static void rzg2l_du_crtc_stop(struct rzg2l_du_crtc *rcrtc)
> > +{
> > + struct drm_crtc *crtc = &rcrtc->crtc;
> > +
> > + /*
> > + * Disable all planes and wait for the change to take effect. This
> is
> > + * required as the plane enable registers are updated on vblank,
> and no
> > + * vblank will occur once the CRTC is stopped. Disabling planes
> when
> > + * starting the CRTC thus wouldn't be enough as it would start
> scanning
> > + * out immediately from old frame buffers until the next vblank.
> > + *
> > + * This increases the CRTC stop delay, especially when multiple
> CRTCs
> > + * are stopped in one operation as we now wait for one vblank per
> CRTC.
> > + * Whether this can be improved needs to be researched.
> > + */
> > + rzg2l_du_crtc_disable_planes(rcrtc);
> > +
> > + /*
> > + * Disable vertical blanking interrupt reporting. We first need to
> wait
> > + * for page flip completion before stopping the CRTC as userspace
> > + * expects page flips to eventually complete.
> > + */
> > + rzg2l_du_crtc_wait_page_flip(rcrtc);
> > + drm_crtc_vblank_off(crtc);
> > +
> > + /* Disable the VSP compositor. */
> > + rzg2l_du_vsp_disable(rcrtc);
> > +
> > + rzg2l_du_start_stop(rcrtc, false);
> > +}
> > +
> > +/* ------------------------------------------------------------------
> -----------
> > + * CRTC Functions
> > + */
> > +
> > +int __rzg2l_du_crtc_plane_atomic_check(struct drm_plane *plane,
> > + struct drm_plane_state *state,
> > + const struct rzg2l_du_format_info
> **format)
>
> This function is only called from rzg2l_du_vsp_plane_atomic_check(), I
> would inline it there.
Agreed.
>
> > +{
> > + struct drm_device *dev = plane->dev;
> > + struct drm_crtc_state *crtc_state;
> > + int ret;
> > +
> > + if (!state->crtc) {
> > + /*
> > + * The visible field is not reset by the DRM core but only
> > + * updated by drm_plane_helper_check_state(), set it
> manually.
> > + */
> > + state->visible = false;
> > + *format = NULL;
> > + return 0;
> > + }
> > +
> > + crtc_state = drm_atomic_get_crtc_state(state->state, state->crtc);
> > + if (IS_ERR(crtc_state))
> > + return PTR_ERR(crtc_state);
> > +
> > + ret = drm_atomic_helper_check_plane_state(state, crtc_state,
> > + DRM_PLANE_NO_SCALING,
> > + DRM_PLANE_NO_SCALING,
> > + true, true);
> > + if (ret < 0)
> > + return ret;
> > +
> > + if (!state->visible) {
> > + *format = NULL;
> > + return 0;
> > + }
> > +
> > + *format = rzg2l_du_format_info(state->fb->format->format);
> > + if (*format == NULL) {
>
> Can this happen, or does the DRM core already checks that the
> framebuffer format is supported by the plane ?
This will make sure the format is as per rzg2l_du_format_info,
Otherwise print unsupported format.
>
> > + dev_dbg(dev->dev, "%s: unsupported format %08x\n", __func__,
> > + state->fb->format->format);
> > + return -EINVAL;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int rzg2l_du_crtc_atomic_check(struct drm_crtc *crtc,
> > + struct drm_atomic_state *state)
> > +{
> > + struct drm_crtc_state *crtc_state =
> drm_atomic_get_new_crtc_state(state,
> > + crtc);
> > + struct rzg2l_du_crtc_state *rstate =
> to_rzg2l_crtc_state(crtc_state);
> > + struct drm_encoder *encoder;
> > +
> > + /* Store the routes from the CRTC output to the DU outputs. */
> > + rstate->outputs = 0;
> > +
> > + drm_for_each_encoder_mask(encoder, crtc->dev,
> > + crtc_state->encoder_mask) {
> > + struct rzg2l_du_encoder *renc;
> > +
> > + /* Skip the writeback encoder. */
> > + if (encoder->encoder_type == DRM_MODE_ENCODER_VIRTUAL)
> > + continue;
> > +
> > + renc = to_rzg2l_encoder(encoder);
> > + rstate->outputs |= BIT(renc->output);
> > + }
>
> Unless I'm mistaken, once you drop dpad0_source, this whole function can
> be dropped too.
I agree. Will drop it.
>
> > +
> > + return 0;
> > +}
> > +
> > +static void rzg2l_du_crtc_atomic_enable(struct drm_crtc *crtc,
> > + struct drm_atomic_state *state)
> > +{
> > + struct rzg2l_du_crtc *rcrtc = to_rzg2l_crtc(crtc);
> > +
> > + rzg2l_du_crtc_get(rcrtc);
> > +
> > + rzg2l_du_crtc_start(rcrtc);
> > +}
> > +
> > +static void rzg2l_du_crtc_atomic_disable(struct drm_crtc *crtc,
> > + struct drm_atomic_state *state)
> > +{
> > + struct rzg2l_du_crtc *rcrtc = to_rzg2l_crtc(crtc);
> > +
> > + rzg2l_du_crtc_stop(rcrtc);
> > + rzg2l_du_crtc_put(rcrtc);
> > +
> > + spin_lock_irq(&crtc->dev->event_lock);
> > + if (crtc->state->event) {
> > + drm_crtc_send_vblank_event(crtc, crtc->state->event);
> > + crtc->state->event = NULL;
> > + }
> > + spin_unlock_irq(&crtc->dev->event_lock);
> > +}
> > +
> > +static void rzg2l_du_crtc_atomic_begin(struct drm_crtc *crtc,
> > + struct drm_atomic_state *state)
> > +{
> > + struct rzg2l_du_crtc *rcrtc = to_rzg2l_crtc(crtc);
> > +
> > + WARN_ON(!crtc->state->enable);
> > +
> > + /*
> > + * If a mode set is in progress we can be called with the CRTC
> disabled.
> > + * We thus need to first get and setup the CRTC in order to
> configure
> > + * planes. We must *not* put the CRTC in .atomic_flush(), as it
> must be
> > + * kept awake until the .atomic_enable() call that will follow.
> The get
> > + * operation in .atomic_enable() will in that case be a no-op, and
> the
> > + * CRTC will be put later in .atomic_disable().
> > + *
> > + * If a mode set is not in progress the CRTC is enabled, and the
> > + * following get call will be a no-op. There is thus no need to
> balance
> > + * it in .atomic_flush() either.
> > + */
>
> This should also be reconsidered based on the needs of your hardware,
> given that you don't need to setup planes like in the R-Car DU driver.
> The CRTC handling can most likely be simplified a lot.
OK will drop this function and move the below code to flush.
WARN_ON(!crtc->state->enable);
rzg2l_du_crtc_get(rcrtc);
>
> > + rzg2l_du_crtc_get(rcrtc);
> > +
> > + rzg2l_du_vsp_atomic_begin(rcrtc);
> > +}
> > +
> > +static void rzg2l_du_crtc_atomic_flush(struct drm_crtc *crtc,
> > + struct drm_atomic_state *state)
> > +{
> > + struct rzg2l_du_crtc *rcrtc = to_rzg2l_crtc(crtc);
> > + struct drm_device *dev = rcrtc->crtc.dev;
> > + unsigned long flags;
> > +
> > + if (crtc->state->event) {
> > + WARN_ON(drm_crtc_vblank_get(crtc) != 0);
> > +
> > + spin_lock_irqsave(&dev->event_lock, flags);
> > + rcrtc->event = crtc->state->event;
> > + crtc->state->event = NULL;
> > + spin_unlock_irqrestore(&dev->event_lock, flags);
> > + }
> > +
> > + rzg2l_du_vsp_atomic_flush(rcrtc);
> > +}
> > +
> > +static const struct drm_crtc_helper_funcs crtc_helper_funcs = {
> > + .atomic_check = rzg2l_du_crtc_atomic_check,
> > + .atomic_begin = rzg2l_du_crtc_atomic_begin,
> > + .atomic_flush = rzg2l_du_crtc_atomic_flush,
> > + .atomic_enable = rzg2l_du_crtc_atomic_enable,
> > + .atomic_disable = rzg2l_du_crtc_atomic_disable,
> > +};
> > +
> > +static void rzg2l_du_crtc_crc_init(struct rzg2l_du_crtc *rcrtc)
> > +{
> > + const char **sources;
> > + unsigned int count;
> > + int i = -1;
> > +
> > + /* Reserve 1 for "auto" source. */
> > + count = rcrtc->vsp->num_planes + 1;
> > +
> > + sources = kmalloc_array(count, sizeof(*sources), GFP_KERNEL);
> > + if (!sources)
> > + return;
> > +
> > + sources[0] = kstrdup("auto", GFP_KERNEL);
> > + if (!sources[0])
> > + goto error;
> > +
> > + for (i = 0; i < rcrtc->vsp->num_planes; ++i) {
> > + struct drm_plane *plane = &rcrtc->vsp->planes[i].plane;
> > + char name[16];
> > +
> > + sprintf(name, "plane%u", plane->base.id);
> > + sources[i + 1] = kstrdup(name, GFP_KERNEL);
> > + if (!sources[i + 1])
> > + goto error;
> > + }
> > +
> > + rcrtc->sources = sources;
> > + rcrtc->sources_count = count;
> > + return;
> > +
> > +error:
> > + while (i >= 0) {
> > + kfree(sources[i]);
> > + i--;
> > + }
> > + kfree(sources);
> > +}
> > +
> > +static void rzg2l_du_crtc_crc_cleanup(struct rzg2l_du_crtc *rcrtc)
> > +{
> > + unsigned int i;
> > +
> > + if (!rcrtc->sources)
> > + return;
> > +
> > + for (i = 0; i < rcrtc->sources_count; i++)
> > + kfree(rcrtc->sources[i]);
> > + kfree(rcrtc->sources);
> > +
> > + rcrtc->sources = NULL;
> > + rcrtc->sources_count = 0;
> > +}
> > +
> > +static struct drm_crtc_state *
> > +rzg2l_du_crtc_atomic_duplicate_state(struct drm_crtc *crtc)
> > +{
> > + struct rzg2l_du_crtc_state *state;
> > + struct rzg2l_du_crtc_state *copy;
> > +
> > + if (WARN_ON(!crtc->state))
> > + return NULL;
> > +
> > + state = to_rzg2l_crtc_state(crtc->state);
> > + copy = kmemdup(state, sizeof(*state), GFP_KERNEL);
> > + if (!copy)
> > + return NULL;
> > +
> > + __drm_atomic_helper_crtc_duplicate_state(crtc, ©->state);
> > +
> > + return ©->state;
> > +}
> > +
> > +static void rzg2l_du_crtc_atomic_destroy_state(struct drm_crtc *crtc,
> > + struct drm_crtc_state *state)
> > +{
> > + __drm_atomic_helper_crtc_destroy_state(state);
> > + kfree(to_rzg2l_crtc_state(state));
> > +}
> > +
> > +static void rzg2l_du_crtc_cleanup(struct drm_crtc *crtc)
> > +{
> > + struct rzg2l_du_crtc *rcrtc = to_rzg2l_crtc(crtc);
> > +
> > + rzg2l_du_crtc_crc_cleanup(rcrtc);
> > +
> > + return drm_crtc_cleanup(crtc);
> > +}
> > +
> > +static void rzg2l_du_crtc_reset(struct drm_crtc *crtc)
> > +{
> > + struct rzg2l_du_crtc_state *state;
> > +
> > + if (crtc->state) {
> > + rzg2l_du_crtc_atomic_destroy_state(crtc, crtc->state);
> > + crtc->state = NULL;
> > + }
> > +
> > + state = kzalloc(sizeof(*state), GFP_KERNEL);
> > + if (!state)
> > + return;
> > +
> > + state->crc.source = VSP1_DU_CRC_NONE;
> > + state->crc.index = 0;
> > +
> > + __drm_atomic_helper_crtc_reset(crtc, &state->state);
> > +}
> > +
> > +static int rzg2l_du_crtc_enable_vblank(struct drm_crtc *crtc)
> > +{
> > + struct rzg2l_du_crtc *rcrtc = to_rzg2l_crtc(crtc);
> > +
> > + rcrtc->vblank_enable = true;
> > +
> > + return 0;
> > +}
> > +
> > +static void rzg2l_du_crtc_disable_vblank(struct drm_crtc *crtc)
> > +{
> > + struct rzg2l_du_crtc *rcrtc = to_rzg2l_crtc(crtc);
> > +
> > + rcrtc->vblank_enable = false;
> > +}
> > +
> > +static int rzg2l_du_crtc_parse_crc_source(struct rzg2l_du_crtc
> *rcrtc,
> > + const char *source_name,
> > + enum vsp1_du_crc_source *source)
> > +{
> > + unsigned int index;
> > + int ret;
> > +
> > + /*
> > + * Parse the source name. Supported values are "plane%u" to
> compute the
> > + * CRC on an input plane (%u is the plane ID), and "auto" to
> compute the
> > + * CRC on the composer (VSP) output.
> > + */
> > +
> > + if (!source_name) {
> > + *source = VSP1_DU_CRC_NONE;
> > + return 0;
> > + } else if (!strcmp(source_name, "auto")) {
> > + *source = VSP1_DU_CRC_OUTPUT;
> > + return 0;
> > + } else if (strstarts(source_name, "plane")) {
> > + unsigned int i;
> > +
> > + *source = VSP1_DU_CRC_PLANE;
> > +
> > + ret = kstrtouint(source_name + strlen("plane"), 10, &index);
> > + if (ret < 0)
> > + return ret;
> > +
> > + for (i = 0; i < rcrtc->vsp->num_planes; ++i) {
> > + if (index == rcrtc->vsp->planes[i].plane.base.id)
> > + return i;
> > + }
> > + }
> > +
> > + return -EINVAL;
> > +}
> > +
> > +static int rzg2l_du_crtc_verify_crc_source(struct drm_crtc *crtc,
> > + const char *source_name,
> > + size_t *values_cnt)
> > +{
> > + struct rzg2l_du_crtc *rcrtc = to_rzg2l_crtc(crtc);
> > + enum vsp1_du_crc_source source;
> > +
> > + if (rzg2l_du_crtc_parse_crc_source(rcrtc, source_name, &source) <
> 0) {
> > + DRM_DEBUG_DRIVER("unknown source %s\n", source_name);
> > + return -EINVAL;
> > + }
> > +
> > + *values_cnt = 1;
> > + return 0;
> > +}
> > +
> > +static const char *const *
> > +rzg2l_du_crtc_get_crc_sources(struct drm_crtc *crtc, size_t *count)
> > +{
> > + struct rzg2l_du_crtc *rcrtc = to_rzg2l_crtc(crtc);
> > +
> > + *count = rcrtc->sources_count;
> > + return rcrtc->sources;
> > +}
> > +
> > +static int rzg2l_du_crtc_set_crc_source(struct drm_crtc *crtc,
> > + const char *source_name)
> > +{
> > + struct rzg2l_du_crtc *rcrtc = to_rzg2l_crtc(crtc);
> > + struct drm_modeset_acquire_ctx ctx;
> > + struct drm_crtc_state *crtc_state;
> > + struct drm_atomic_state *state;
> > + enum vsp1_du_crc_source source;
> > + unsigned int index;
> > + int ret;
> > +
> > + ret = rzg2l_du_crtc_parse_crc_source(rcrtc, source_name, &source);
> > + if (ret < 0)
> > + return ret;
> > +
> > + index = ret;
> > +
> > + /* Perform an atomic commit to set the CRC source. */
> > + drm_modeset_acquire_init(&ctx, 0);
> > +
> > + state = drm_atomic_state_alloc(crtc->dev);
> > + if (!state) {
> > + ret = -ENOMEM;
> > + goto unlock;
> > + }
> > +
> > + state->acquire_ctx = &ctx;
> > +
> > +retry:
> > + crtc_state = drm_atomic_get_crtc_state(state, crtc);
> > + if (!IS_ERR(crtc_state)) {
> > + struct rzg2l_du_crtc_state *rcrtc_state;
> > +
> > + rcrtc_state = to_rzg2l_crtc_state(crtc_state);
> > + rcrtc_state->crc.source = source;
> > + rcrtc_state->crc.index = index;
> > +
> > + ret = drm_atomic_commit(state);
> > + } else {
> > + ret = PTR_ERR(crtc_state);
> > + }
> > +
> > + if (ret == -EDEADLK) {
> > + drm_atomic_state_clear(state);
> > + drm_modeset_backoff(&ctx);
> > + goto retry;
> > + }
> > +
> > + drm_atomic_state_put(state);
> > +
> > +unlock:
> > + drm_modeset_drop_locks(&ctx);
> > + drm_modeset_acquire_fini(&ctx);
> > +
> > + return ret;
> > +}
> > +
> > +static const struct drm_crtc_funcs crtc_funcs_rz = {
> > + .reset = rzg2l_du_crtc_reset,
> > + .destroy = rzg2l_du_crtc_cleanup,
> > + .set_config = drm_atomic_helper_set_config,
> > + .page_flip = drm_atomic_helper_page_flip,
> > + .atomic_duplicate_state = rzg2l_du_crtc_atomic_duplicate_state,
> > + .atomic_destroy_state = rzg2l_du_crtc_atomic_destroy_state,
> > + .enable_vblank = rzg2l_du_crtc_enable_vblank,
> > + .disable_vblank = rzg2l_du_crtc_disable_vblank,
> > + .set_crc_source = rzg2l_du_crtc_set_crc_source,
> > + .verify_crc_source = rzg2l_du_crtc_verify_crc_source,
> > + .get_crc_sources = rzg2l_du_crtc_get_crc_sources,
> > +};
> > +
> > +/* ------------------------------------------------------------------
> -----------
> > + * Initialization
> > + */
> > +
> > +int rzg2l_du_crtc_create(struct rzg2l_du_device *rcdu)
> > +{
> > + struct rzg2l_du_crtc *rcrtc = &rcdu->crtcs[0];
> > + struct drm_crtc *crtc = &rcrtc->crtc;
> > + struct drm_plane *primary;
> > + int ret;
> > +
> > + rcrtc->rstc = devm_reset_control_get_shared(rcdu->dev, NULL);
> > + if (IS_ERR(rcrtc->rstc)) {
> > + dev_err(rcdu->dev, "can't get cpg reset\n");
> > + return PTR_ERR(rcrtc->rstc);
> > + }
> > +
> > + rcrtc->rzg2l_clocks.aclk = devm_clk_get(rcdu->dev, "aclk");
> > + if (IS_ERR(rcrtc->rzg2l_clocks.aclk)) {
> > + dev_err(rcdu->dev, "no axi clock for DU\n");
> > + return PTR_ERR(rcrtc->rzg2l_clocks.aclk);
> > + }
> > +
> > + rcrtc->rzg2l_clocks.pclk = devm_clk_get(rcdu->dev, "pclk");
> > + if (IS_ERR(rcrtc->rzg2l_clocks.pclk)) {
> > + dev_err(rcdu->dev, "no peripheral clock for DU\n");
> > + return PTR_ERR(rcrtc->rzg2l_clocks.pclk);
> > + }
> > +
> > + rcrtc->rzg2l_clocks.dclk = devm_clk_get(rcdu->dev, "vclk");
> > + if (IS_ERR(rcrtc->rzg2l_clocks.dclk)) {
> > + dev_err(rcdu->dev, "no video clock for DU\n");
> > + return PTR_ERR(rcrtc->rzg2l_clocks.dclk);
> > + }
> > +
> > + init_waitqueue_head(&rcrtc->flip_wait);
> > + init_waitqueue_head(&rcrtc->vblank_wait);
> > + spin_lock_init(&rcrtc->vblank_lock);
> > +
> > + rcrtc->dev = rcdu;
> > + rcrtc->index = 0;
> > +
> > + primary = &rcrtc->vsp->planes[rcrtc->vsp_pipe].plane;
> > +
> > + ret = drm_crtc_init_with_planes(&rcdu->ddev, crtc, primary, NULL,
> > + &crtc_funcs_rz, NULL);
> > + if (ret < 0)
> > + return ret;
> > +
> > + drm_crtc_helper_add(crtc, &crtc_helper_funcs);
> > +
> > + rzg2l_du_crtc_crc_init(rcrtc);
> > +
> > + return 0;
> > +}
> > diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.h
> b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.h
> > new file mode 100644
> > index 000000000000..290b5ea99545
> > --- /dev/null
> > +++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.h
> > @@ -0,0 +1,99 @@
> > +/* SPDX-License-Identifier: GPL-2.0+ */
> > +/*
> > + * RZ/G2L Display Unit CRTCs
> > + *
> > + * Copyright (C) 2023 Renesas Electronics Corporation
> > + *
> > + * Based on rcar_du_crtc.h
> > + */
> > +
> > +#ifndef __RZG2L_DU_CRTC_H__
> > +#define __RZG2L_DU_CRTC_H__
> > +
> > +#include <linux/mutex.h>
> > +#include <linux/spinlock.h>
> > +#include <linux/wait.h>
> > +
> > +#include <drm/drm_crtc.h>
> > +#include <drm/drm_writeback.h>
> > +
> > +#include <media/vsp1.h>
> > +
>
> Missing struct clk. Please go through the headers and add missing
> forward declarations, or drop unneeded ones.
OK will do.
>
> > +struct reset_control;
> > +struct rzg2l_du_vsp;
> > +struct rzg2l_du_format_info;
> > +
> > +/**
> > + * struct rzg2l_du_crtc - the CRTC, representing a DU superposition
> processor
> > + * @crtc: base DRM CRTC
> > + * @dev: the DU device
> > + * @mmio_offset: offset of the CRTC registers in the DU MMIO block
> > + * @index: CRTC hardware index
> > + * @initialized: whether the CRTC has been initialized and clocks
> enabled
> > + * @vblank_enable: whether vblank events are enabled on this CRTC
> > + * @event: event to post when the pending page flip completes
> > + * @flip_wait: wait queue used to signal page flip completion
> > + * @vblank_lock: protects vblank_wait and vblank_count
> > + * @vblank_wait: wait queue used to signal vertical blanking
> > + * @vblank_count: number of vertical blanking interrupts to wait for
> > + * @vsp: VSP feeding video to this CRTC
> > + * @vsp_pipe: index of the VSP pipeline feeding video to this CRTC
> > + * @rstc: reset controller
> > + * @rzg2l_clocks: the bus, main and video clock
> > + */
> > +struct rzg2l_du_crtc {
> > + struct drm_crtc crtc;
> > +
> > + struct rzg2l_du_device *dev;
> > + unsigned int mmio_offset;
>
> Not used. Please go through all structure fields and drop the unused
> ones (including both the fully unused fields, and the fields that are
> written but never read).
Agreed.
>
> > + unsigned int index;
> > + bool initialized;
> > +
> > + bool vblank_enable;
> > + struct drm_pending_vblank_event *event;
> > + wait_queue_head_t flip_wait;
> > +
> > + spinlock_t vblank_lock;
> > + wait_queue_head_t vblank_wait;
> > + unsigned int vblank_count;
> > +
> > + struct rzg2l_du_vsp *vsp;
> > + unsigned int vsp_pipe;
> > +
> > + const char *const *sources;
> > + unsigned int sources_count;
> > +
> > + struct reset_control *rstc;
> > + struct {
> > + struct clk *aclk;
> > + struct clk *pclk;
> > + struct clk *dclk;
> > + } rzg2l_clocks;
> > +};
> > +
> > +#define to_rzg2l_crtc(c) container_of(c, struct rzg2l_du_crtc,
> crtc)
>
> A static inline would be better than a macro, it's more type-safe. Same
> for to_rzg2l_crtc_state() and to_rzg2l_encoder().
Will use static inline.
>
> > +
> > +/**
> > + * struct rzg2l_du_crtc_state - Driver-specific CRTC state
> > + * @state: base DRM CRTC state
> > + * @crc: CRC computation configuration
> > + * @outputs: bitmask of the outputs (enum rzg2l_du_output) driven by
> this CRTC
> > + */
> > +struct rzg2l_du_crtc_state {
> > + struct drm_crtc_state state;
> > +
> > + struct vsp1_du_crc_config crc;
> > + unsigned int outputs;
> > +};
> > +
> > +#define to_rzg2l_crtc_state(s) container_of(s, struct
> rzg2l_du_crtc_state, state)
> > +
> > +int rzg2l_du_crtc_create(struct rzg2l_du_device *rcdu);
> > +
> > +void rzg2l_du_crtc_finish_page_flip(struct rzg2l_du_crtc *rcrtc);
> > +
> > +int __rzg2l_du_crtc_plane_atomic_check(struct drm_plane *plane,
> > + struct drm_plane_state *state,
> > + const struct rzg2l_du_format_info
> **format);
> > +
> > +#endif /* __RZG2L_DU_CRTC_H__ */
> > diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c
> b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c
> > new file mode 100644
> > index 000000000000..0fea1fea837c
> > --- /dev/null
> > +++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c
> > @@ -0,0 +1,188 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * RZ/G2L Display Unit DRM driver
> > + *
> > + * Copyright (C) 2023 Renesas Electronics Corporation
> > + *
> > + * Based on rcar_du_drv.c
> > + */
> > +
> > +#include <linux/clk.h>
>
> Not needed.
OK.
>
> > +#include <linux/dma-mapping.h>
> > +#include <linux/io.h>
>
> Not needed either. Could you check if the other headers are needed ?
OK will do.
>
> > +#include <linux/mm.h>
> > +#include <linux/module.h>
> > +#include <linux/of_device.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/pm.h>
> > +#include <linux/slab.h>
> > +#include <linux/wait.h>
> > +
> > +#include <drm/drm_atomic_helper.h>
> > +#include <drm/drm_drv.h>
> > +#include <drm/drm_fbdev_generic.h>
> > +#include <drm/drm_gem_dma_helper.h>
> > +#include <drm/drm_managed.h>
> > +#include <drm/drm_probe_helper.h>
> > +
> > +#include "rzg2l_du_drv.h"
> > +#include "rzg2l_du_kms.h"
> > +
> > +/* ------------------------------------------------------------------
> -----------
> > + * Device Information
> > + */
> > +
> > +static const struct rzg2l_du_device_info rzg2l_du_r9a07g044_info = {
> > + .channels_mask = BIT(0),
> > + .routes = {
> > + [RZG2L_DU_OUTPUT_DSI0] = {
> > + .possible_crtcs = BIT(0),
> > + .port = 0,
> > + },
> > + [RZG2L_DU_OUTPUT_DPAD0] = {
> > + .possible_crtcs = BIT(0),
> > + .port = 1,
> > + }
> > + }
> > +};
> > +
> > +static const struct of_device_id rzg2l_du_of_table[] = {
> > + { .compatible = "renesas,r9a07g044-du", .data =
> &rzg2l_du_r9a07g044_info },
> > + { /* sentinel */ }
> > +};
> > +
> > +MODULE_DEVICE_TABLE(of, rzg2l_du_of_table);
> > +
> > +const char *rzg2l_du_output_name(enum rzg2l_du_output output)
> > +{
> > + static const char * const names[] = {
> > + [RZG2L_DU_OUTPUT_DSI0] = "DSI0",
> > + [RZG2L_DU_OUTPUT_DPAD0] = "DPAD0"
> > + };
> > +
> > + if (output >= ARRAY_SIZE(names))
> > + return "UNKNOWN";
> > +
> > + return names[output];
> > +}
> > +
> > +/* ------------------------------------------------------------------
> -----------
> > + * DRM operations
> > + */
> > +
> > +DEFINE_DRM_GEM_DMA_FOPS(rzg2l_du_fops);
> > +
> > +static const struct drm_driver rzg2l_du_driver = {
> > + .driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC,
> > + .dumb_create = rzg2l_du_dumb_create,
> > + .prime_handle_to_fd = drm_gem_prime_handle_to_fd,
> > + .prime_fd_to_handle = drm_gem_prime_fd_to_handle,
> > + .gem_prime_import_sg_table = rzg2l_du_gem_prime_import_sg_table,
> > + .gem_prime_mmap = drm_gem_prime_mmap,
> > + .fops = &rzg2l_du_fops,
> > + .name = "rzg2l-du",
> > + .desc = "Renesas RZ/G2L Display Unit",
> > + .date = "20230410",
> > + .major = 1,
> > + .minor = 0,
> > +};
> > +
> > +/* ------------------------------------------------------------------
> -----------
> > + * Platform driver
> > + */
> > +
> > +static int rzg2l_du_remove(struct platform_device *pdev)
> > +{
> > + struct rzg2l_du_device *rcdu = platform_get_drvdata(pdev);
> > + struct drm_device *ddev = &rcdu->ddev;
> > +
> > + drm_dev_unregister(ddev);
> > + drm_atomic_helper_shutdown(ddev);
> > +
> > + drm_kms_helper_poll_fini(ddev);
> > +
> > + return 0;
> > +}
> > +
> > +static void rzg2l_du_shutdown(struct platform_device *pdev)
> > +{
> > + struct rzg2l_du_device *rcdu = platform_get_drvdata(pdev);
> > +
> > + drm_atomic_helper_shutdown(&rcdu->ddev);
> > +}
> > +
> > +static int rzg2l_du_probe(struct platform_device *pdev)
> > +{
> > + struct rzg2l_du_device *rcdu;
> > + int ret;
> > +
> > + if (drm_firmware_drivers_only())
> > + return -ENODEV;
> > +
> > + /* Allocate and initialize the RZ/G2L device structure. */
> > + rcdu = devm_drm_dev_alloc(&pdev->dev, &rzg2l_du_driver,
> > + struct rzg2l_du_device, ddev);
> > + if (IS_ERR(rcdu))
> > + return PTR_ERR(rcdu);
> > +
> > + rcdu->dev = &pdev->dev;
> > + rcdu->info = of_device_get_match_data(rcdu->dev);
> > +
> > + platform_set_drvdata(pdev, rcdu);
> > +
> > + /* I/O resources */
> > + rcdu->mmio = devm_platform_ioremap_resource(pdev, 0);
> > + if (IS_ERR(rcdu->mmio))
> > + return PTR_ERR(rcdu->mmio);
> > +
> > + /*
> > + * When sourcing frames from a VSP the DU doesn't perform any
> memory
> > + * access so set the DMA coherent mask to 40 bits to accept all
> buffers.
> > + */
> > + ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(40));
> > + if (ret)
> > + return ret;
> > +
> > + /* DRM/KMS objects */
> > + ret = rzg2l_du_modeset_init(rcdu);
> > + if (ret < 0) {
> > + if (ret != -EPROBE_DEFER)
> > + dev_err(&pdev->dev,
> > + "failed to initialize DRM/KMS (%d)\n", ret);
>
> Use dev_err_probe()
As per your patch [1], I guess it is not required
[1] https://patchwork.kernel.org/project/linux-renesas-soc/patch/20230530153251.22302-1-laurent.pinchart+renesas@ideasonboard.com/
>
> > + goto error;
> > + }
> > +
> > + /*
> > + * Register the DRM device with the core and the connectors with
> > + * sysfs.
> > + */
> > + ret = drm_dev_register(&rcdu->ddev, 0);
> > + if (ret)
> > + goto error;
> > +
> > + DRM_INFO("Device %s probed\n", dev_name(&pdev->dev));
>
> Use drm_info().
Agreed.
>
> > +
> > + drm_fbdev_generic_setup(&rcdu->ddev, 32);
> > +
> > + return 0;
> > +
> > +error:
> > + drm_kms_helper_poll_fini(&rcdu->ddev);
> > + return ret;
> > +}
> > +
> > +static struct platform_driver rzg2l_du_platform_driver = {
> > + .probe = rzg2l_du_probe,
> > + .remove = rzg2l_du_remove,
> > + .shutdown = rzg2l_du_shutdown,
> > + .driver = {
> > + .name = "rzg2l-du",
> > + .of_match_table = rzg2l_du_of_table,
> > + },
> > +};
> > +
> > +module_platform_driver(rzg2l_du_platform_driver);
> > +
> > +MODULE_AUTHOR("Biju Das <biju.das.jz@bp.renesas.com>");
> > +MODULE_DESCRIPTION("Renesas RZ/G2L Display Unit DRM Driver");
> > +MODULE_LICENSE("GPL");
> > diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h
> b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h
> > new file mode 100644
> > index 000000000000..3b84e91aa64a
> > --- /dev/null
> > +++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h
> > @@ -0,0 +1,89 @@
> > +/* SPDX-License-Identifier: GPL-2.0+ */
> > +/*
> > + * RZ/G2L Display Unit DRM driver
> > + *
> > + * Copyright (C) 2023 Renesas Electronics Corporation
> > + *
> > + * Based on rcar_du_drv.h
> > + */
> > +
> > +#ifndef __RZG2L_DU_DRV_H__
> > +#define __RZG2L_DU_DRV_H__
> > +
> > +#include <linux/kernel.h>
> > +#include <linux/wait.h>
>
> Not needed.
OK.
>
> > +
> > +#include <drm/drm_device.h>
> > +
> > +#include "rzg2l_du_crtc.h"
> > +#include "rzg2l_du_vsp.h"
> > +
> > +struct clk;
>
> Not used in this header.
Will remove.
>
> > +struct device;
> > +struct drm_bridge;
> > +struct drm_property;
> > +struct rzg2l_du_device;
>
> Not needed.
Ooops. Will take out.
>
> > +
> > +enum rzg2l_du_output {
> > + RZG2L_DU_OUTPUT_DSI0,
> > + RZG2L_DU_OUTPUT_DPAD0,
> > + RZG2L_DU_OUTPUT_MAX,
> > +};
> > +
> > +/*
> > + * struct rzg2l_du_output_routing - Output routing specification
> > + * @possible_crtcs: bitmask of possible CRTCs for the output
> > + * @port: device tree port number corresponding to this output route
> > + *
> > + * The DU has 2 possible outputs (DPAD0, DSI0). Output routing data
> > + * specify the valid SoC outputs, which CRTCs can drive the output,
> and the type
> > + * of in-SoC encoder for the output.
> > + */
> > +struct rzg2l_du_output_routing {
> > + unsigned int possible_crtcs;
> > + unsigned int port;
> > +};
> > +
> > +/*
> > + * struct rzg2l_du_device_info - DU model-specific information
> > + * @channels_mask: bit mask of available DU channels
> > + * @routes: array of CRTC to output routes, indexed by output
> (RZG2L_DU_OUTPUT_*)
> > + */
> > +struct rzg2l_du_device_info {
> > + unsigned int channels_mask;
> > + struct rzg2l_du_output_routing routes[RZG2L_DU_OUTPUT_MAX];
> > +};
>
> The driver supports a single SoC, with two outputs, connected to the
> same DU channel. Do you really need to copy the rzg2l_du_device_info
> abstraction from the rcar-du driver, or could you simplify the code ?
After adding basic support, as an optimization
will simplify the code later. Hope it is ok for you??
> > +
> > +#define RZG2L_DU_MAX_CRTCS 1
> > +#define RZG2L_DU_MAX_VSPS 1
> > +#define RZG2L_DU_MAX_DSI 1
> > +
> > +struct rzg2l_du_device {
> > + struct device *dev;
> > + const struct rzg2l_du_device_info *info;
> > +
> > + void __iomem *mmio;
> > +
> > + struct drm_device ddev;
> > +
> > + struct rzg2l_du_crtc crtcs[RZG2L_DU_MAX_CRTCS];
> > + unsigned int num_crtcs;
> > +
> > + struct rzg2l_du_vsp vsps[RZG2L_DU_MAX_VSPS];
> > + struct drm_bridge *dsi[RZG2L_DU_MAX_DSI];
>
> This is written but never read. You can drop the field.
Agreed.
>
> > +
> > + struct {
> > + struct drm_property *colorkey;
> > + } props;
> > +
> > + unsigned int dpad0_source;
>
> This is written but never read. You can drop the field.
Agreed. Will add later when we add support for DPI.
Cheers,
Biju
^ permalink raw reply [flat|nested] 20+ messages in thread
* RE: [PATCH v9 RESEND 0/5] Add RZ/{G2L,G2LC} and RZ/V2L Display Unit support
2023-05-29 15:45 ` Laurent Pinchart
@ 2023-06-01 12:12 ` Biju Das
2023-06-02 11:15 ` Laurent Pinchart
0 siblings, 1 reply; 20+ messages in thread
From: Biju Das @ 2023-06-01 12:12 UTC (permalink / raw)
To: Laurent Pinchart
Cc: David Airlie, Daniel Vetter, Philipp Zabel, Geert Uytterhoeven,
Kieran Bingham, dri-devel, linux-renesas-soc, Fabrizio Castro,
Prabhakar Mahadev Lad, linux-kernel
Hi Laurent,
Thanks for the feedback.
> Subject: Re: [PATCH v9 RESEND 0/5] Add RZ/{G2L,G2LC} and RZ/V2L Display
> Unit support
>
> On Mon, May 29, 2023 at 02:22:06PM +0000, Biju Das wrote:
> > HI Laurent,
> >
> > Thanks for the feedback.
> >
> > > Subject: Re: [PATCH v9 RESEND 0/5] Add RZ/{G2L,G2LC} and RZ/V2L
> > > Display Unit support
> > >
> > > Hi Biju,
> > >
> > > On Thu, May 25, 2023 at 02:30:10PM +0000, Biju Das wrote:
> > > > Hi DRM maintainers,
> > > >
> > > > Gentle ping.
> > >
> > > Sorry, I was on holidays the last two weeks.
> > >
> > > > Are we happy with moving all Renesas drm drivers to Renesas
> > > > specific directory or preference is for separate one??
> > >
> > > This works for me.
> > >
> > > > If it is later, I can send RZ/G2L drm driver separate.
> > > >
> > > > Otherwise, I need to rebase and resend.
> > >
> > > Your series applies cleanly on top of the latest drm-next branch. Is
> > > there a specific need to rebase and resend ?
> >
> > Nope. After my patch series there were some patches from Geert for
> > drm/shmobile merged to drm-misc-next by Thomas.
> >
> > Maybe git managed this automatically??
>
> Probably, git is nice :-)
>
> > > I haven't had time to review patch 4/5 (the driver) yet. All the
> > > rest looks good to me. Should I already include 1/5 in my next pull
> request ?
> >
> > Yes, please.
>
> OK, I will do so. I've reviewed 4/5 in the meantime, but changes are
> needed, so I won't wait for v10 before applying 1/5.
>
I have incorporated review comments for v9. I need to rebase my changes.
Is the pull request being done to drm-misc-next?
Cheers,
Biju
> > > > Please let me know your preference.
> > > >
> > > > Cheers,
> > > > Biju
> > > >
> > > >
> > > > > -----Original Message-----
> > > > > From: Biju Das
> > > > > Sent: Monday, May 15, 2023 8:58 AM
> > > > > To: David Airlie <airlied@gmail.com>; Daniel Vetter
> > > > > <daniel@ffwll.ch>; Philipp Zabel <p.zabel@pengutronix.de>; Geert
> > > > > Uytterhoeven <geert+renesas@glider.be>; Laurent Pinchart
> > > > > <laurent.pinchart@ideasonboard.com>; Kieran Bingham
> > > > > <kieran.bingham+renesas@ideasonboard.com>
> > > > > Cc: dri-devel@lists.freedesktop.org;
> > > > > linux-renesas-soc@vger.kernel.org;
> > > > > Fabrizio Castro <fabrizio.castro.jz@renesas.com>; Prabhakar
> > > > > Mahadev Lad <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > > > > Subject: RE: [PATCH v9 RESEND 0/5] Add RZ/{G2L,G2LC} and RZ/V2L
> > > > > Display Unit support
> > > > >
> > > > > Hi All,
> > > > >
> > > > > Gentle ping. Are we happy with this patch series?
> > > > >
> > > > > Cheers,
> > > > > Biju
> > > > >
> > > > > > Subject: [PATCH v9 RESEND 0/5] Add RZ/{G2L,G2LC} and RZ/V2L
> > > > > > Display Unit support
> > > > > >
> > > > > > RZ/G2L LCD controller composed of Frame compression
> > > > > > Processor(FCPVD), Video signal processor (VSPD) and Display
> > > > > > unit(DU). The output of LCDC is connected to Display parallel
> > > > > > interface and MIPI link video interface.
> > > > > >
> > > > > > The output from DSI is connected to ADV7535.
> > > > > >
> > > > > > Created a vendor specific directory renesas and moved all
> > > > > > renesas drm drivers to it (rcar-du and shmobile). Then added
> > > > > > support for RZ/G2L DU DRM driver by creating rz_du directory.
> > > > > >
> > > > > > Ref:
> > > > > >
> > > > > >
> > > > > > v8->v9:
> > > > > > * Added Rb tag from Laurent and Acked-by tag from Kieran for
> > > patch#1.
> > > > > > * Added Rb tag from Laurent and Geert for patch#3.
> > > > > > * Dropped reset_control_assert() from error patch for
> > > > > > rzg2l_du_crtc_get() as
> > > > > > suggested by Philipp Zabel.
> > > > > > * Added Rb tag from Laurent oatch#5.
> > > > > > * Updated MAINTAINERS entries for common parts(Makefile and
> > > Kconfig).
> > > > > > v7->v8:
> > > > > > * Moved rcar-du and shmobile DRM drivers to renesas specific
> > > > > > vendor directory.
> > > > > > * Fixed the typo vsp2->du in RZ/V2L DU bindings patch.
> > > > > > * Added Rb tag from Rob for RZ/V2L DU bindings patch.
> > > > > > * Dropped RCar du lib and created RZ/G2L DU DRM driver by
> > > > > > creating rz_du folder.
> > > > > > * Updated MAINTAINERS entries.
> > > > > > v6->v7:
> > > > > > * Split DU lib and RZ/G2L du driver as separate patch series
> as
> > > > > > DU support added to more platforms based on RZ/G2L alike
> SoCs.
> > > > > > * Rebased to latest drm-tip.
> > > > > > * Added patch #2 for binding support for RZ/V2L DU
> > > > > > * Added patch #4 for driver support for RZ/V2L DU
> > > > > > * Added patch #5 for SoC DTSI support for RZ/G2L DU
> > > > > > * Added patch #6 for SoC DTSI support for RZ/V2L DU
> > > > > > * Added patch #7 for Enabling DU on SMARC EVK based on
> > > > > > RZ/{G2L,V2L} SoCs.
> > > > > > * Added patch #8 for Enabling DU on SMARC EVK based on
> > > > > > RZ/G2LC
> > > SoC.
> > > > > > v5->v6:
> > > > > > * Merged DU lib and RZ/G2L du driver in same patch series
> > > > > > * Rebased to latest drm-misc.
> > > > > > * Merged patch#1 to RZ/G2L Driver patch.
> > > > > > * Updated KConfig dependency from ARCH_RENESAS->ARCH_RZG2L.
> > > > > > * Optimized rzg2l_du_output_name() by removing unsupported
> > > outputs.
> > > > > >
> > > > > > v4->v5:
> > > > > > * Added Rb tag from Rob for binding patch.
> > > > > > * Started using RCar DU libs(kms, vsp and encoder)
> > > > > > * Started using rcar_du_device, rcar_du_write, rcar_du_crtc,
> > > > > > rcar_du_format_info and rcar_du_encoder.
> > > > > > v3->v4:
> > > > > > * Changed compatible name from
> > > > > > renesas,du-r9a07g044->renesas,r9a07g044-
> > > > > > du
> > > > > > * started using same compatible for RZ/G2{L,LC}
> > > > > > * Removed rzg2l_du_group.h and struct rzg2l_du_group
> > > > > > * Renamed __rzg2l_du_group_start_stop->rzg2l_du_start_stop
> > > > > > * Removed rzg2l_du_group_restart
> > > > > > * Updated rzg2l_du_crtc_set_display_timing
> > > > > > * Removed mode_valid callback.
> > > > > > * Updated rzg2l_du_crtc_create() parameters
> > > > > > * Updated compatible
> > > > > > * Removed RZG2L_DU_MAX_GROUPS
> > > > > > V2->v3:
> > > > > > * Added new bindings for RZ/G2L DU
> > > > > > * Removed indirection and created new DRM driver based on
> > > > > > R-Car DU
> > > > > > v1->v2:
> > > > > > * Based on [1], all references to 'rzg2l_lcdc' replaced with
> > > > > 'rzg2l_du'
> > > > > > * Updated commit description for bindings
> > > > > > * Removed LCDC references from bindings
> > > > > > * Changed clock name from du.0->aclk from bindings
> > > > > > * Changed reset name from du.0->du from bindings
> > > > > > * Replaced crtc_helper_funcs->rcar_crtc_helper_funcs
> > > > > > * Updated macro DRM_RZG2L_LCDC->DRM_RZG2L_DU
> > > > > > * Replaced rzg2l-lcdc-drm->rzg2l-du-drm
> > > > > > * Added forward declaration for struct reset_control
> > > > > >
> > > > > > [1]
> > > > > >
> > > > > > Biju Das (5):
> > > > > > drm: Place Renesas drivers in a separate dir
> > > > > > dt-bindings: display: Document Renesas RZ/G2L DU bindings
> > > > > > dt-bindings: display: renesas,rzg2l-du: Document RZ/V2L DU
> > > bindings
> > > > > > drm: Add RZ/G2L DU Support
> > > > > > MAINTAINERS: Add maintainer for RZ DU drivers
> > > > > >
> > > > > > .../bindings/display/renesas,rzg2l-du.yaml | 129 +++
> > > > > > MAINTAINERS | 16 +-
> > > > > > drivers/gpu/drm/Kconfig | 4 +-
> > > > > > drivers/gpu/drm/Makefile | 3 +-
> > > > > > drivers/gpu/drm/renesas/Kconfig | 5 +
> > > > > > drivers/gpu/drm/renesas/Makefile | 5 +
> > > > > > drivers/gpu/drm/{ => renesas}/rcar-du/Kconfig | 0
> > > > > > .../gpu/drm/{ => renesas}/rcar-du/Makefile | 0
> > > > > > .../gpu/drm/{ => renesas}/rcar-du/rcar_cmm.c | 0
> > > > > > .../gpu/drm/{ => renesas}/rcar-du/rcar_cmm.h | 0
> > > > > > .../drm/{ => renesas}/rcar-du/rcar_du_crtc.c | 0
> > > > > > .../drm/{ => renesas}/rcar-du/rcar_du_crtc.h | 0
> > > > > > .../drm/{ => renesas}/rcar-du/rcar_du_drv.c | 0
> > > > > > .../drm/{ => renesas}/rcar-du/rcar_du_drv.h | 0
> > > > > > .../{ => renesas}/rcar-du/rcar_du_encoder.c | 0
> > > > > > .../{ => renesas}/rcar-du/rcar_du_encoder.h | 0
> > > > > > .../drm/{ => renesas}/rcar-du/rcar_du_group.c | 0
> > > > > > .../drm/{ => renesas}/rcar-du/rcar_du_group.h | 0
> > > > > > .../drm/{ => renesas}/rcar-du/rcar_du_kms.c | 0
> > > > > > .../drm/{ => renesas}/rcar-du/rcar_du_kms.h | 0
> > > > > > .../drm/{ => renesas}/rcar-du/rcar_du_plane.c | 0
> > > > > > .../drm/{ => renesas}/rcar-du/rcar_du_plane.h | 0
> > > > > > .../drm/{ => renesas}/rcar-du/rcar_du_regs.h | 0
> > > > > > .../drm/{ => renesas}/rcar-du/rcar_du_vsp.c | 0
> > > > > > .../drm/{ => renesas}/rcar-du/rcar_du_vsp.h | 0
> > > > > > .../{ => renesas}/rcar-du/rcar_du_writeback.c | 0
> > > > > > .../{ => renesas}/rcar-du/rcar_du_writeback.h | 0
> > > > > > .../drm/{ => renesas}/rcar-du/rcar_dw_hdmi.c | 0
> > > > > > .../gpu/drm/{ => renesas}/rcar-du/rcar_lvds.c | 0
> > > > > > .../gpu/drm/{ => renesas}/rcar-du/rcar_lvds.h | 0
> > > > > > .../{ => renesas}/rcar-du/rcar_lvds_regs.h | 0
> > > > > > .../drm/{ => renesas}/rcar-du/rcar_mipi_dsi.c | 0
> > > > > > .../drm/{ => renesas}/rcar-du/rcar_mipi_dsi.h | 0
> > > > > > .../rcar-du/rcar_mipi_dsi_regs.h | 0
> > > > > > .../{ => renesas}/rcar-du/rzg2l_mipi_dsi.c | 0
> > > > > > .../rcar-du/rzg2l_mipi_dsi_regs.h | 0
> > > > > > drivers/gpu/drm/renesas/rz-du/Kconfig | 20 +
> > > > > > drivers/gpu/drm/renesas/rz-du/Makefile | 8 +
> > > > > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c | 714
> > > > > > ++++++++++++++++ drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.h
> > > > > > ++++++++++++++++ |
> > > > > > 99 +++ drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c | 188
> > > > > > +++++ drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h | 89 ++
> > > > > > .../gpu/drm/renesas/rz-du/rzg2l_du_encoder.c | 112 +++
> > > > > > .../gpu/drm/renesas/rz-du/rzg2l_du_encoder.h | 28 +
> > > > > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.c | 770
> > > > > > ++++++++++++++++++ drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.
> > > > > > ++++++++++++++++++ h |
> > > > > > 43 + drivers/gpu/drm/renesas/rz-du/rzg2l_du_regs.h | 67 ++
> > > > > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.c | 430 ++++++++++
> > > > > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.h | 94 +++
> > > > > > .../gpu/drm/{ => renesas}/shmobile/Kconfig | 0
> > > > > > .../gpu/drm/{ => renesas}/shmobile/Makefile | 0
> > > > > > .../shmobile/shmob_drm_backlight.c | 0
> > > > > > .../shmobile/shmob_drm_backlight.h | 0
> > > > > > .../{ => renesas}/shmobile/shmob_drm_crtc.c | 0
> > > > > > .../{ => renesas}/shmobile/shmob_drm_crtc.h | 0
> > > > > > .../{ => renesas}/shmobile/shmob_drm_drv.c | 0
> > > > > > .../{ => renesas}/shmobile/shmob_drm_drv.h | 0
> > > > > > .../{ => renesas}/shmobile/shmob_drm_kms.c | 0
> > > > > > .../{ => renesas}/shmobile/shmob_drm_kms.h | 0
> > > > > > .../{ => renesas}/shmobile/shmob_drm_plane.c | 0
> > > > > > .../{ => renesas}/shmobile/shmob_drm_plane.h | 0
> > > > > > .../{ => renesas}/shmobile/shmob_drm_regs.h | 0
> > > > > > 62 files changed, 2816 insertions(+), 8 deletions(-) create
> > > > > > mode
> > > > > > 100644
> > > > > > Documentation/devicetree/bindings/display/renesas,rzg2l-du.yam
> > > > > > l create mode 100644 drivers/gpu/drm/renesas/Kconfig create
> > > > > > mode
> > > > > > 100644 drivers/gpu/drm/renesas/Makefile rename
> > > > > > drivers/gpu/drm/{ => renesas}/rcar-du/Kconfig (100%) rename
> > > > > > drivers/gpu/drm/{ => renesas}/rcar-du/Makefile (100%) rename
> > > > > > drivers/gpu/drm/{ => renesas}/rcar-du/rcar_cmm.c (100%)
> > > > > > rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_cmm.h (100%)
> > > > > > rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_crtc.c
> > > > > > (100%) rename drivers/gpu/drm/{ =>
> > > > > > renesas}/rcar-du/rcar_du_crtc.h (100%) rename
> > > > > > drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_drv.c (100%)
> > > > > > rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_drv.h
> > > > > > (100%) rename drivers/gpu/drm/{ =>
> > > > > > renesas}/rcar-du/rcar_du_encoder.c (100%) rename
> > > > > > drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_encoder.h
> > > > > > (100%) rename drivers/gpu/drm/{ =>
> > > > > > renesas}/rcar-du/rcar_du_group.c (100%) rename
> > > > > > drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_group.h (100%)
> > > > > > rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_kms.c
> > > > > > (100%) rename drivers/gpu/drm/{ =>
> > > > > > renesas}/rcar-du/rcar_du_kms.h (100%) rename
> > > > > > drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_plane.c (100%)
> > > > > > rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_plane.h
> > > > > > (100%) rename drivers/gpu/drm/{ =>
> > > > > > renesas}/rcar-du/rcar_du_regs.h (100%) rename
> > > > > > drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_vsp.c (100%)
> > > > > > rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_vsp.h
> > > > > > (100%) rename drivers/gpu/drm/{ =>
> > > > > > renesas}/rcar-du/rcar_du_writeback.c (100%) rename
> > > > > > drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_writeback.h
> > > > > > (100%) rename drivers/gpu/drm/{ =>
> > > > > > renesas}/rcar-du/rcar_dw_hdmi.c (100%) rename
> > > > > > drivers/gpu/drm/{ => renesas}/rcar-du/rcar_lvds.c (100%)
> > > > > > rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_lvds.h
> > > > > > (100%) rename drivers/gpu/drm/{ =>
> > > > > > renesas}/rcar-du/rcar_lvds_regs.h
> > > > > > (100%) rename drivers/gpu/drm/{ =>
> > > > > > renesas}/rcar-du/rcar_mipi_dsi.c (100%) rename
> > > > > > drivers/gpu/drm/{ => renesas}/rcar-du/rcar_mipi_dsi.h (100%)
> > > > > > rename drivers/gpu/drm/{ =>
> > > > > > renesas}/rcar-du/rcar_mipi_dsi_regs.h (100%) rename
> > > > > > drivers/gpu/drm/{ => renesas}/rcar-du/rzg2l_mipi_dsi.c
> > > > > > (100%) rename drivers/gpu/drm/{ =>
> > > > > > renesas}/rcar-du/rzg2l_mipi_dsi_regs.h
> > > > > > (100%) create mode 100644
> > > > > > drivers/gpu/drm/renesas/rz-du/Kconfig
> > > > > > create mode 100644 drivers/gpu/drm/renesas/rz-du/Makefile
> > > > > > create mode 100644
> > > > > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c
> > > > > > create mode 100644
> > > > > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.h
> > > > > > create mode 100644
> > > > > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c
> > > > > > create mode 100644
> > > > > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h
> > > > > > create mode 100644
> > > > > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.c
> > > > > > create mode 100644
> > > > > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.h
> > > > > > create mode 100644
> > > > > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.c
> > > > > > create mode 100644
> > > > > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.h
> > > > > > create mode 100644
> > > > > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_regs.h
> > > > > > create mode 100644
> > > > > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.c
> > > > > > create mode 100644
> > > > > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.h
> > > > > > rename drivers/gpu/drm/{ => renesas}/shmobile/Kconfig (100%)
> > > > > > rename drivers/gpu/drm/{ => renesas}/shmobile/Makefile (100%)
> > > > > > rename drivers/gpu/drm/{ =>
> > > > > > renesas}/shmobile/shmob_drm_backlight.c (100%) rename
> > > > > > drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_backlight.h
> > > > > > (100%) rename drivers/gpu/drm/{ =>
> > > > > > renesas}/shmobile/shmob_drm_crtc.c
> > > > > > (100%) rename drivers/gpu/drm/{ =>
> > > > > > renesas}/shmobile/shmob_drm_crtc.h
> > > > > > (100%) rename drivers/gpu/drm/{ =>
> > > > > > renesas}/shmobile/shmob_drm_drv.c
> > > > > > (100%) rename drivers/gpu/drm/{ =>
> > > > > > renesas}/shmobile/shmob_drm_drv.h
> > > > > > (100%) rename drivers/gpu/drm/{ =>
> > > > > > renesas}/shmobile/shmob_drm_kms.c
> > > > > > (100%) rename drivers/gpu/drm/{ =>
> > > > > > renesas}/shmobile/shmob_drm_kms.h
> > > > > > (100%) rename drivers/gpu/drm/{ =>
> > > > > > renesas}/shmobile/shmob_drm_plane.c
> > > > > > (100%) rename drivers/gpu/drm/{ =>
> > > > > > renesas}/shmobile/shmob_drm_plane.h
> > > > > > (100%) rename drivers/gpu/drm/{ =>
> > > > > > renesas}/shmobile/shmob_drm_regs.h
> > > > > > (100%)
>
> --
> Regards,
>
> Laurent Pinchart
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v9 RESEND 0/5] Add RZ/{G2L,G2LC} and RZ/V2L Display Unit support
2023-06-01 12:12 ` Biju Das
@ 2023-06-02 11:15 ` Laurent Pinchart
2023-06-02 14:20 ` Biju Das
0 siblings, 1 reply; 20+ messages in thread
From: Laurent Pinchart @ 2023-06-02 11:15 UTC (permalink / raw)
To: Biju Das
Cc: David Airlie, Daniel Vetter, Philipp Zabel, Geert Uytterhoeven,
Kieran Bingham, dri-devel, linux-renesas-soc, Fabrizio Castro,
Prabhakar Mahadev Lad, linux-kernel
Hi Biju,
On Thu, Jun 01, 2023 at 12:12:59PM +0000, Biju Das wrote:
> > Subject: Re: [PATCH v9 RESEND 0/5] Add RZ/{G2L,G2LC} and RZ/V2L Display
> > Unit support
> >
> > On Mon, May 29, 2023 at 02:22:06PM +0000, Biju Das wrote:
> > > > Subject: Re: [PATCH v9 RESEND 0/5] Add RZ/{G2L,G2LC} and RZ/V2L
> > > > Display Unit support
> > > > On Thu, May 25, 2023 at 02:30:10PM +0000, Biju Das wrote:
> > > > > Hi DRM maintainers,
> > > > >
> > > > > Gentle ping.
> > > >
> > > > Sorry, I was on holidays the last two weeks.
> > > >
> > > > > Are we happy with moving all Renesas drm drivers to Renesas
> > > > > specific directory or preference is for separate one??
> > > >
> > > > This works for me.
> > > >
> > > > > If it is later, I can send RZ/G2L drm driver separate.
> > > > >
> > > > > Otherwise, I need to rebase and resend.
> > > >
> > > > Your series applies cleanly on top of the latest drm-next branch. Is
> > > > there a specific need to rebase and resend ?
> > >
> > > Nope. After my patch series there were some patches from Geert for
> > > drm/shmobile merged to drm-misc-next by Thomas.
> > >
> > > Maybe git managed this automatically??
> >
> > Probably, git is nice :-)
> >
> > > > I haven't had time to review patch 4/5 (the driver) yet. All the
> > > > rest looks good to me. Should I already include 1/5 in my next pull
> > request ?
> > >
> > > Yes, please.
> >
> > OK, I will do so. I've reviewed 4/5 in the meantime, but changes are
> > needed, so I won't wait for v10 before applying 1/5.
>
> I have incorporated review comments for v9. I need to rebase my changes.
>
> Is the pull request being done to drm-misc-next?
I've just sent the pull request for drm-next, and have CC'ed you.
> > > > > Please let me know your preference.
> > > > >
> > > > > Cheers,
> > > > > Biju
> > > > >
> > > > >
> > > > > > -----Original Message-----
> > > > > > From: Biju Das
> > > > > > Sent: Monday, May 15, 2023 8:58 AM
> > > > > > To: David Airlie <airlied@gmail.com>; Daniel Vetter
> > > > > > <daniel@ffwll.ch>; Philipp Zabel <p.zabel@pengutronix.de>; Geert
> > > > > > Uytterhoeven <geert+renesas@glider.be>; Laurent Pinchart
> > > > > > <laurent.pinchart@ideasonboard.com>; Kieran Bingham
> > > > > > <kieran.bingham+renesas@ideasonboard.com>
> > > > > > Cc: dri-devel@lists.freedesktop.org;
> > > > > > linux-renesas-soc@vger.kernel.org;
> > > > > > Fabrizio Castro <fabrizio.castro.jz@renesas.com>; Prabhakar
> > > > > > Mahadev Lad <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > > > > > Subject: RE: [PATCH v9 RESEND 0/5] Add RZ/{G2L,G2LC} and RZ/V2L
> > > > > > Display Unit support
> > > > > >
> > > > > > Hi All,
> > > > > >
> > > > > > Gentle ping. Are we happy with this patch series?
> > > > > >
> > > > > > Cheers,
> > > > > > Biju
> > > > > >
> > > > > > > Subject: [PATCH v9 RESEND 0/5] Add RZ/{G2L,G2LC} and RZ/V2L
> > > > > > > Display Unit support
> > > > > > >
> > > > > > > RZ/G2L LCD controller composed of Frame compression
> > > > > > > Processor(FCPVD), Video signal processor (VSPD) and Display
> > > > > > > unit(DU). The output of LCDC is connected to Display parallel
> > > > > > > interface and MIPI link video interface.
> > > > > > >
> > > > > > > The output from DSI is connected to ADV7535.
> > > > > > >
> > > > > > > Created a vendor specific directory renesas and moved all
> > > > > > > renesas drm drivers to it (rcar-du and shmobile). Then added
> > > > > > > support for RZ/G2L DU DRM driver by creating rz_du directory.
> > > > > > >
> > > > > > > Ref:
> > > > > > >
> > > > > > >
> > > > > > > v8->v9:
> > > > > > > * Added Rb tag from Laurent and Acked-by tag from Kieran for
> > > > patch#1.
> > > > > > > * Added Rb tag from Laurent and Geert for patch#3.
> > > > > > > * Dropped reset_control_assert() from error patch for
> > > > > > > rzg2l_du_crtc_get() as
> > > > > > > suggested by Philipp Zabel.
> > > > > > > * Added Rb tag from Laurent oatch#5.
> > > > > > > * Updated MAINTAINERS entries for common parts(Makefile and
> > > > Kconfig).
> > > > > > > v7->v8:
> > > > > > > * Moved rcar-du and shmobile DRM drivers to renesas specific
> > > > > > > vendor directory.
> > > > > > > * Fixed the typo vsp2->du in RZ/V2L DU bindings patch.
> > > > > > > * Added Rb tag from Rob for RZ/V2L DU bindings patch.
> > > > > > > * Dropped RCar du lib and created RZ/G2L DU DRM driver by
> > > > > > > creating rz_du folder.
> > > > > > > * Updated MAINTAINERS entries.
> > > > > > > v6->v7:
> > > > > > > * Split DU lib and RZ/G2L du driver as separate patch series
> > as
> > > > > > > DU support added to more platforms based on RZ/G2L alike
> > SoCs.
> > > > > > > * Rebased to latest drm-tip.
> > > > > > > * Added patch #2 for binding support for RZ/V2L DU
> > > > > > > * Added patch #4 for driver support for RZ/V2L DU
> > > > > > > * Added patch #5 for SoC DTSI support for RZ/G2L DU
> > > > > > > * Added patch #6 for SoC DTSI support for RZ/V2L DU
> > > > > > > * Added patch #7 for Enabling DU on SMARC EVK based on
> > > > > > > RZ/{G2L,V2L} SoCs.
> > > > > > > * Added patch #8 for Enabling DU on SMARC EVK based on
> > > > > > > RZ/G2LC
> > > > SoC.
> > > > > > > v5->v6:
> > > > > > > * Merged DU lib and RZ/G2L du driver in same patch series
> > > > > > > * Rebased to latest drm-misc.
> > > > > > > * Merged patch#1 to RZ/G2L Driver patch.
> > > > > > > * Updated KConfig dependency from ARCH_RENESAS->ARCH_RZG2L.
> > > > > > > * Optimized rzg2l_du_output_name() by removing unsupported
> > > > outputs.
> > > > > > >
> > > > > > > v4->v5:
> > > > > > > * Added Rb tag from Rob for binding patch.
> > > > > > > * Started using RCar DU libs(kms, vsp and encoder)
> > > > > > > * Started using rcar_du_device, rcar_du_write, rcar_du_crtc,
> > > > > > > rcar_du_format_info and rcar_du_encoder.
> > > > > > > v3->v4:
> > > > > > > * Changed compatible name from
> > > > > > > renesas,du-r9a07g044->renesas,r9a07g044-
> > > > > > > du
> > > > > > > * started using same compatible for RZ/G2{L,LC}
> > > > > > > * Removed rzg2l_du_group.h and struct rzg2l_du_group
> > > > > > > * Renamed __rzg2l_du_group_start_stop->rzg2l_du_start_stop
> > > > > > > * Removed rzg2l_du_group_restart
> > > > > > > * Updated rzg2l_du_crtc_set_display_timing
> > > > > > > * Removed mode_valid callback.
> > > > > > > * Updated rzg2l_du_crtc_create() parameters
> > > > > > > * Updated compatible
> > > > > > > * Removed RZG2L_DU_MAX_GROUPS
> > > > > > > V2->v3:
> > > > > > > * Added new bindings for RZ/G2L DU
> > > > > > > * Removed indirection and created new DRM driver based on
> > > > > > > R-Car DU
> > > > > > > v1->v2:
> > > > > > > * Based on [1], all references to 'rzg2l_lcdc' replaced with
> > > > > > 'rzg2l_du'
> > > > > > > * Updated commit description for bindings
> > > > > > > * Removed LCDC references from bindings
> > > > > > > * Changed clock name from du.0->aclk from bindings
> > > > > > > * Changed reset name from du.0->du from bindings
> > > > > > > * Replaced crtc_helper_funcs->rcar_crtc_helper_funcs
> > > > > > > * Updated macro DRM_RZG2L_LCDC->DRM_RZG2L_DU
> > > > > > > * Replaced rzg2l-lcdc-drm->rzg2l-du-drm
> > > > > > > * Added forward declaration for struct reset_control
> > > > > > >
> > > > > > > [1]
> > > > > > >
> > > > > > > Biju Das (5):
> > > > > > > drm: Place Renesas drivers in a separate dir
> > > > > > > dt-bindings: display: Document Renesas RZ/G2L DU bindings
> > > > > > > dt-bindings: display: renesas,rzg2l-du: Document RZ/V2L DU
> > > > bindings
> > > > > > > drm: Add RZ/G2L DU Support
> > > > > > > MAINTAINERS: Add maintainer for RZ DU drivers
> > > > > > >
> > > > > > > .../bindings/display/renesas,rzg2l-du.yaml | 129 +++
> > > > > > > MAINTAINERS | 16 +-
> > > > > > > drivers/gpu/drm/Kconfig | 4 +-
> > > > > > > drivers/gpu/drm/Makefile | 3 +-
> > > > > > > drivers/gpu/drm/renesas/Kconfig | 5 +
> > > > > > > drivers/gpu/drm/renesas/Makefile | 5 +
> > > > > > > drivers/gpu/drm/{ => renesas}/rcar-du/Kconfig | 0
> > > > > > > .../gpu/drm/{ => renesas}/rcar-du/Makefile | 0
> > > > > > > .../gpu/drm/{ => renesas}/rcar-du/rcar_cmm.c | 0
> > > > > > > .../gpu/drm/{ => renesas}/rcar-du/rcar_cmm.h | 0
> > > > > > > .../drm/{ => renesas}/rcar-du/rcar_du_crtc.c | 0
> > > > > > > .../drm/{ => renesas}/rcar-du/rcar_du_crtc.h | 0
> > > > > > > .../drm/{ => renesas}/rcar-du/rcar_du_drv.c | 0
> > > > > > > .../drm/{ => renesas}/rcar-du/rcar_du_drv.h | 0
> > > > > > > .../{ => renesas}/rcar-du/rcar_du_encoder.c | 0
> > > > > > > .../{ => renesas}/rcar-du/rcar_du_encoder.h | 0
> > > > > > > .../drm/{ => renesas}/rcar-du/rcar_du_group.c | 0
> > > > > > > .../drm/{ => renesas}/rcar-du/rcar_du_group.h | 0
> > > > > > > .../drm/{ => renesas}/rcar-du/rcar_du_kms.c | 0
> > > > > > > .../drm/{ => renesas}/rcar-du/rcar_du_kms.h | 0
> > > > > > > .../drm/{ => renesas}/rcar-du/rcar_du_plane.c | 0
> > > > > > > .../drm/{ => renesas}/rcar-du/rcar_du_plane.h | 0
> > > > > > > .../drm/{ => renesas}/rcar-du/rcar_du_regs.h | 0
> > > > > > > .../drm/{ => renesas}/rcar-du/rcar_du_vsp.c | 0
> > > > > > > .../drm/{ => renesas}/rcar-du/rcar_du_vsp.h | 0
> > > > > > > .../{ => renesas}/rcar-du/rcar_du_writeback.c | 0
> > > > > > > .../{ => renesas}/rcar-du/rcar_du_writeback.h | 0
> > > > > > > .../drm/{ => renesas}/rcar-du/rcar_dw_hdmi.c | 0
> > > > > > > .../gpu/drm/{ => renesas}/rcar-du/rcar_lvds.c | 0
> > > > > > > .../gpu/drm/{ => renesas}/rcar-du/rcar_lvds.h | 0
> > > > > > > .../{ => renesas}/rcar-du/rcar_lvds_regs.h | 0
> > > > > > > .../drm/{ => renesas}/rcar-du/rcar_mipi_dsi.c | 0
> > > > > > > .../drm/{ => renesas}/rcar-du/rcar_mipi_dsi.h | 0
> > > > > > > .../rcar-du/rcar_mipi_dsi_regs.h | 0
> > > > > > > .../{ => renesas}/rcar-du/rzg2l_mipi_dsi.c | 0
> > > > > > > .../rcar-du/rzg2l_mipi_dsi_regs.h | 0
> > > > > > > drivers/gpu/drm/renesas/rz-du/Kconfig | 20 +
> > > > > > > drivers/gpu/drm/renesas/rz-du/Makefile | 8 +
> > > > > > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c | 714
> > > > > > > ++++++++++++++++ drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.h
> > > > > > > ++++++++++++++++ |
> > > > > > > 99 +++ drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c | 188
> > > > > > > +++++ drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h | 89 ++
> > > > > > > .../gpu/drm/renesas/rz-du/rzg2l_du_encoder.c | 112 +++
> > > > > > > .../gpu/drm/renesas/rz-du/rzg2l_du_encoder.h | 28 +
> > > > > > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.c | 770
> > > > > > > ++++++++++++++++++ drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.
> > > > > > > ++++++++++++++++++ h |
> > > > > > > 43 + drivers/gpu/drm/renesas/rz-du/rzg2l_du_regs.h | 67 ++
> > > > > > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.c | 430 ++++++++++
> > > > > > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.h | 94 +++
> > > > > > > .../gpu/drm/{ => renesas}/shmobile/Kconfig | 0
> > > > > > > .../gpu/drm/{ => renesas}/shmobile/Makefile | 0
> > > > > > > .../shmobile/shmob_drm_backlight.c | 0
> > > > > > > .../shmobile/shmob_drm_backlight.h | 0
> > > > > > > .../{ => renesas}/shmobile/shmob_drm_crtc.c | 0
> > > > > > > .../{ => renesas}/shmobile/shmob_drm_crtc.h | 0
> > > > > > > .../{ => renesas}/shmobile/shmob_drm_drv.c | 0
> > > > > > > .../{ => renesas}/shmobile/shmob_drm_drv.h | 0
> > > > > > > .../{ => renesas}/shmobile/shmob_drm_kms.c | 0
> > > > > > > .../{ => renesas}/shmobile/shmob_drm_kms.h | 0
> > > > > > > .../{ => renesas}/shmobile/shmob_drm_plane.c | 0
> > > > > > > .../{ => renesas}/shmobile/shmob_drm_plane.h | 0
> > > > > > > .../{ => renesas}/shmobile/shmob_drm_regs.h | 0
> > > > > > > 62 files changed, 2816 insertions(+), 8 deletions(-) create
> > > > > > > mode
> > > > > > > 100644
> > > > > > > Documentation/devicetree/bindings/display/renesas,rzg2l-du.yam
> > > > > > > l create mode 100644 drivers/gpu/drm/renesas/Kconfig create
> > > > > > > mode
> > > > > > > 100644 drivers/gpu/drm/renesas/Makefile rename
> > > > > > > drivers/gpu/drm/{ => renesas}/rcar-du/Kconfig (100%) rename
> > > > > > > drivers/gpu/drm/{ => renesas}/rcar-du/Makefile (100%) rename
> > > > > > > drivers/gpu/drm/{ => renesas}/rcar-du/rcar_cmm.c (100%)
> > > > > > > rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_cmm.h (100%)
> > > > > > > rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_crtc.c
> > > > > > > (100%) rename drivers/gpu/drm/{ =>
> > > > > > > renesas}/rcar-du/rcar_du_crtc.h (100%) rename
> > > > > > > drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_drv.c (100%)
> > > > > > > rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_drv.h
> > > > > > > (100%) rename drivers/gpu/drm/{ =>
> > > > > > > renesas}/rcar-du/rcar_du_encoder.c (100%) rename
> > > > > > > drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_encoder.h
> > > > > > > (100%) rename drivers/gpu/drm/{ =>
> > > > > > > renesas}/rcar-du/rcar_du_group.c (100%) rename
> > > > > > > drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_group.h (100%)
> > > > > > > rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_kms.c
> > > > > > > (100%) rename drivers/gpu/drm/{ =>
> > > > > > > renesas}/rcar-du/rcar_du_kms.h (100%) rename
> > > > > > > drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_plane.c (100%)
> > > > > > > rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_plane.h
> > > > > > > (100%) rename drivers/gpu/drm/{ =>
> > > > > > > renesas}/rcar-du/rcar_du_regs.h (100%) rename
> > > > > > > drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_vsp.c (100%)
> > > > > > > rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_vsp.h
> > > > > > > (100%) rename drivers/gpu/drm/{ =>
> > > > > > > renesas}/rcar-du/rcar_du_writeback.c (100%) rename
> > > > > > > drivers/gpu/drm/{ => renesas}/rcar-du/rcar_du_writeback.h
> > > > > > > (100%) rename drivers/gpu/drm/{ =>
> > > > > > > renesas}/rcar-du/rcar_dw_hdmi.c (100%) rename
> > > > > > > drivers/gpu/drm/{ => renesas}/rcar-du/rcar_lvds.c (100%)
> > > > > > > rename drivers/gpu/drm/{ => renesas}/rcar-du/rcar_lvds.h
> > > > > > > (100%) rename drivers/gpu/drm/{ =>
> > > > > > > renesas}/rcar-du/rcar_lvds_regs.h
> > > > > > > (100%) rename drivers/gpu/drm/{ =>
> > > > > > > renesas}/rcar-du/rcar_mipi_dsi.c (100%) rename
> > > > > > > drivers/gpu/drm/{ => renesas}/rcar-du/rcar_mipi_dsi.h (100%)
> > > > > > > rename drivers/gpu/drm/{ =>
> > > > > > > renesas}/rcar-du/rcar_mipi_dsi_regs.h (100%) rename
> > > > > > > drivers/gpu/drm/{ => renesas}/rcar-du/rzg2l_mipi_dsi.c
> > > > > > > (100%) rename drivers/gpu/drm/{ =>
> > > > > > > renesas}/rcar-du/rzg2l_mipi_dsi_regs.h
> > > > > > > (100%) create mode 100644
> > > > > > > drivers/gpu/drm/renesas/rz-du/Kconfig
> > > > > > > create mode 100644 drivers/gpu/drm/renesas/rz-du/Makefile
> > > > > > > create mode 100644
> > > > > > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c
> > > > > > > create mode 100644
> > > > > > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.h
> > > > > > > create mode 100644
> > > > > > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c
> > > > > > > create mode 100644
> > > > > > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h
> > > > > > > create mode 100644
> > > > > > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.c
> > > > > > > create mode 100644
> > > > > > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.h
> > > > > > > create mode 100644
> > > > > > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.c
> > > > > > > create mode 100644
> > > > > > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.h
> > > > > > > create mode 100644
> > > > > > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_regs.h
> > > > > > > create mode 100644
> > > > > > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.c
> > > > > > > create mode 100644
> > > > > > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.h
> > > > > > > rename drivers/gpu/drm/{ => renesas}/shmobile/Kconfig (100%)
> > > > > > > rename drivers/gpu/drm/{ => renesas}/shmobile/Makefile (100%)
> > > > > > > rename drivers/gpu/drm/{ =>
> > > > > > > renesas}/shmobile/shmob_drm_backlight.c (100%) rename
> > > > > > > drivers/gpu/drm/{ => renesas}/shmobile/shmob_drm_backlight.h
> > > > > > > (100%) rename drivers/gpu/drm/{ =>
> > > > > > > renesas}/shmobile/shmob_drm_crtc.c
> > > > > > > (100%) rename drivers/gpu/drm/{ =>
> > > > > > > renesas}/shmobile/shmob_drm_crtc.h
> > > > > > > (100%) rename drivers/gpu/drm/{ =>
> > > > > > > renesas}/shmobile/shmob_drm_drv.c
> > > > > > > (100%) rename drivers/gpu/drm/{ =>
> > > > > > > renesas}/shmobile/shmob_drm_drv.h
> > > > > > > (100%) rename drivers/gpu/drm/{ =>
> > > > > > > renesas}/shmobile/shmob_drm_kms.c
> > > > > > > (100%) rename drivers/gpu/drm/{ =>
> > > > > > > renesas}/shmobile/shmob_drm_kms.h
> > > > > > > (100%) rename drivers/gpu/drm/{ =>
> > > > > > > renesas}/shmobile/shmob_drm_plane.c
> > > > > > > (100%) rename drivers/gpu/drm/{ =>
> > > > > > > renesas}/shmobile/shmob_drm_plane.h
> > > > > > > (100%) rename drivers/gpu/drm/{ =>
> > > > > > > renesas}/shmobile/shmob_drm_regs.h
> > > > > > > (100%)
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v9 RESEND 4/5] drm: Add RZ/G2L DU Support
2023-06-01 12:08 ` Biju Das
@ 2023-06-02 11:34 ` Laurent Pinchart
2023-06-02 16:05 ` Biju Das
0 siblings, 1 reply; 20+ messages in thread
From: Laurent Pinchart @ 2023-06-02 11:34 UTC (permalink / raw)
To: Biju Das
Cc: David Airlie, Daniel Vetter, Philipp Zabel, Kieran Bingham,
dri-devel, linux-renesas-soc, Geert Uytterhoeven,
Fabrizio Castro, Prabhakar Mahadev Lad
Hi Biju,
On Thu, Jun 01, 2023 at 12:08:44PM +0000, Biju Das wrote:
> > Subject: Re: [PATCH v9 RESEND 4/5] drm: Add RZ/G2L DU Support
> >
> > Hi Biju,
> >
> > Thank you for the patch.
> >
> > This is a partial review, because the driver is big, and because some
> > changes in v10 will (hopefully) simplify the code and make review
> > easier.
>
> I agree v10 will simplify the code as I have do clean-ups based on your
> review commnet.
>
> > On Tue, May 02, 2023 at 11:09:11AM +0100, Biju Das wrote:
> > > The LCD controller is composed of Frame Compression Processor (FCPVD),
> > > Video Signal Processor (VSPD), and Display Unit (DU).
> > >
> > > It has DPI/DSI interfaces and supports a maximum resolution of 1080p
> > > along with 2 RPFs to support the blending of two picture layers and
> > > raster operations (ROPs).
> > >
> > > The DU module is connected to VSPD. Add RZ/G2L DU support for RZ/G2L
> > > alike SoCs.
> > >
> > > Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
> > > ---
> > > Ref:
> > >
> > > v8->v9:
> > > * Dropped reset_control_assert() from error patch for rzg2l_du_crtc_get() as
> > > suggested by Philipp Zabel.
> > > v7->v8:
> > > * Dropped RCar du lib and created RZ/G2L DU DRM driver by creating rz_du folder.
> > > * Updated KConfig and Makefile.
> > > v6->v7:
> > > * Split DU lib and RZ/G2L du driver as separate patch series as
> > > DU support added to more platforms based on RZ/G2L alike SoCs.
> > > * Rebased to latest drm-tip.
> > > * Added patch #2 for binding support for RZ/V2L DU
> > > * Added patch #4 for driver support for RZ/V2L DU
> > > * Added patch #5 for SoC DTSI support for RZ/G2L DU
> > > * Added patch #6 for SoC DTSI support for RZ/V2L DU
> > > * Added patch #7 for Enabling DU on SMARC EVK based on RZ/{G2L,V2L} SoCs.
> > > * Added patch #8 for Enabling DU on SMARC EVK based on RZ/G2LC SoC.
> > > ---
> > > drivers/gpu/drm/renesas/Kconfig | 1 +
> > > drivers/gpu/drm/renesas/Makefile | 1 +
> > > drivers/gpu/drm/renesas/rz-du/Kconfig | 20 +
> > > drivers/gpu/drm/renesas/rz-du/Makefile | 8 +
> > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c | 714 ++++++++++++++++
> > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.h | 99 +++
> > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c | 188 +++++
> > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h | 89 ++
> > > .../gpu/drm/renesas/rz-du/rzg2l_du_encoder.c | 112 +++
> > > .../gpu/drm/renesas/rz-du/rzg2l_du_encoder.h | 28 +
> > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.c | 770 ++++++++++++++++++
> > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.h | 43 +
> > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_regs.h | 67 ++
> > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.c | 430 ++++++++++
> > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.h | 94 +++
> > > 15 files changed, 2664 insertions(+)
> > > create mode 100644 drivers/gpu/drm/renesas/rz-du/Kconfig
> > > create mode 100644 drivers/gpu/drm/renesas/rz-du/Makefile
> > > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c
> > > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.h
> > > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c
> > > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h
> > > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.c
> > > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.h
> > > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.c
> > > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.h
> > > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_regs.h
> > > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.c
> > > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.h
[snip]
> > > diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c
> > > new file mode 100644
> > > index 000000000000..d61d433d72e6
> > > --- /dev/null
> > > +++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c
> > > @@ -0,0 +1,714 @@
[snip]
> > > +/* -----------------------------------------------------------------------------
> > > + * CRTC Functions
> > > + */
> > > +
> > > +int __rzg2l_du_crtc_plane_atomic_check(struct drm_plane *plane,
> > > + struct drm_plane_state *state,
> > > + const struct rzg2l_du_format_info **format)
> >
> > This function is only called from rzg2l_du_vsp_plane_atomic_check(), I
> > would inline it there.
>
> Agreed.
>
> > > +{
> > > + struct drm_device *dev = plane->dev;
> > > + struct drm_crtc_state *crtc_state;
> > > + int ret;
> > > +
> > > + if (!state->crtc) {
> > > + /*
> > > + * The visible field is not reset by the DRM core but only
> > > + * updated by drm_plane_helper_check_state(), set it manually.
> > > + */
> > > + state->visible = false;
> > > + *format = NULL;
> > > + return 0;
> > > + }
> > > +
> > > + crtc_state = drm_atomic_get_crtc_state(state->state, state->crtc);
> > > + if (IS_ERR(crtc_state))
> > > + return PTR_ERR(crtc_state);
> > > +
> > > + ret = drm_atomic_helper_check_plane_state(state, crtc_state,
> > > + DRM_PLANE_NO_SCALING,
> > > + DRM_PLANE_NO_SCALING,
> > > + true, true);
> > > + if (ret < 0)
> > > + return ret;
> > > +
> > > + if (!state->visible) {
> > > + *format = NULL;
> > > + return 0;
> > > + }
> > > +
> > > + *format = rzg2l_du_format_info(state->fb->format->format);
> > > + if (*format == NULL) {
> >
> > Can this happen, or does the DRM core already checks that the
> > framebuffer format is supported by the plane ?
>
> This will make sure the format is as per rzg2l_du_format_info,
> Otherwise print unsupported format.
I understand that, but it wasn't my question. Does the DRM core check if
the framebuffer pixel format is supported by the plane, using the
plane's supported pixel formats specified by the driver when the plane
was created ? If it does, you could drop this check, as
rzg2l_du_format_info() should support all the formats that the driver
specifies as supported by the plane.
I believe the DRM core handles this already, given the
drm_plane_check_pixel_format() call in drm_atomic_plane_check().
> > > + dev_dbg(dev->dev, "%s: unsupported format %08x\n", __func__,
> > > + state->fb->format->format);
> > > + return -EINVAL;
> > > + }
> > > +
> > > + return 0;
> > > +}
[snip]
> > > diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c
> > > new file mode 100644
> > > index 000000000000..0fea1fea837c
> > > --- /dev/null
> > > +++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c
> > > @@ -0,0 +1,188 @@
[snip]
> > > +static int rzg2l_du_probe(struct platform_device *pdev)
> > > +{
> > > + struct rzg2l_du_device *rcdu;
> > > + int ret;
> > > +
> > > + if (drm_firmware_drivers_only())
> > > + return -ENODEV;
> > > +
> > > + /* Allocate and initialize the RZ/G2L device structure. */
> > > + rcdu = devm_drm_dev_alloc(&pdev->dev, &rzg2l_du_driver,
> > > + struct rzg2l_du_device, ddev);
> > > + if (IS_ERR(rcdu))
> > > + return PTR_ERR(rcdu);
> > > +
> > > + rcdu->dev = &pdev->dev;
> > > + rcdu->info = of_device_get_match_data(rcdu->dev);
> > > +
> > > + platform_set_drvdata(pdev, rcdu);
> > > +
> > > + /* I/O resources */
> > > + rcdu->mmio = devm_platform_ioremap_resource(pdev, 0);
> > > + if (IS_ERR(rcdu->mmio))
> > > + return PTR_ERR(rcdu->mmio);
> > > +
> > > + /*
> > > + * When sourcing frames from a VSP the DU doesn't perform any memory
> > > + * access so set the DMA coherent mask to 40 bits to accept all buffers.
> > > + */
> > > + ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(40));
> > > + if (ret)
> > > + return ret;
> > > +
> > > + /* DRM/KMS objects */
> > > + ret = rzg2l_du_modeset_init(rcdu);
> > > + if (ret < 0) {
> > > + if (ret != -EPROBE_DEFER)
> > > + dev_err(&pdev->dev,
> > > + "failed to initialize DRM/KMS (%d)\n", ret);
> >
> > Use dev_err_probe()
>
> As per your patch [1], I guess it is not required
>
> [1] https://patchwork.kernel.org/project/linux-renesas-soc/patch/20230530153251.22302-1-laurent.pinchart+renesas@ideasonboard.com/
If you add dev_err_probe() calls in rzg2l_du_modeset_init() as
appropriate, like done in [1] :-)
> > > + goto error;
> > > + }
> > > +
> > > + /*
> > > + * Register the DRM device with the core and the connectors with
> > > + * sysfs.
> > > + */
> > > + ret = drm_dev_register(&rcdu->ddev, 0);
> > > + if (ret)
> > > + goto error;
> > > +
> > > + DRM_INFO("Device %s probed\n", dev_name(&pdev->dev));
> >
> > Use drm_info().
>
> Agreed.
>
> > > +
> > > + drm_fbdev_generic_setup(&rcdu->ddev, 32);
> > > +
> > > + return 0;
> > > +
> > > +error:
> > > + drm_kms_helper_poll_fini(&rcdu->ddev);
> > > + return ret;
> > > +}
[snip]
> > > diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h
> > > new file mode 100644
> > > index 000000000000..3b84e91aa64a
> > > --- /dev/null
> > > +++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h
> > > @@ -0,0 +1,89 @@
[snip]
> > > +enum rzg2l_du_output {
> > > + RZG2L_DU_OUTPUT_DSI0,
> > > + RZG2L_DU_OUTPUT_DPAD0,
> > > + RZG2L_DU_OUTPUT_MAX,
> > > +};
> > > +
> > > +/*
> > > + * struct rzg2l_du_output_routing - Output routing specification
> > > + * @possible_crtcs: bitmask of possible CRTCs for the output
> > > + * @port: device tree port number corresponding to this output route
> > > + *
> > > + * The DU has 2 possible outputs (DPAD0, DSI0). Output routing data
> > > + * specify the valid SoC outputs, which CRTCs can drive the output, and the type
> > > + * of in-SoC encoder for the output.
> > > + */
> > > +struct rzg2l_du_output_routing {
> > > + unsigned int possible_crtcs;
> > > + unsigned int port;
> > > +};
> > > +
> > > +/*
> > > + * struct rzg2l_du_device_info - DU model-specific information
> > > + * @channels_mask: bit mask of available DU channels
> > > + * @routes: array of CRTC to output routes, indexed by output (RZG2L_DU_OUTPUT_*)
> > > + */
> > > +struct rzg2l_du_device_info {
> > > + unsigned int channels_mask;
> > > + struct rzg2l_du_output_routing routes[RZG2L_DU_OUTPUT_MAX];
> > > +};
> >
> > The driver supports a single SoC, with two outputs, connected to the
> > same DU channel. Do you really need to copy the rzg2l_du_device_info
> > abstraction from the rcar-du driver, or could you simplify the code ?
>
> After adding basic support, as an optimization
> will simplify the code later. Hope it is ok for you??
I'm OK with patches on top. Please don't forget about them :-)
[snip]
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 20+ messages in thread
* RE: [PATCH v9 RESEND 0/5] Add RZ/{G2L,G2LC} and RZ/V2L Display Unit support
2023-06-02 11:15 ` Laurent Pinchart
@ 2023-06-02 14:20 ` Biju Das
0 siblings, 0 replies; 20+ messages in thread
From: Biju Das @ 2023-06-02 14:20 UTC (permalink / raw)
To: Laurent Pinchart
Cc: David Airlie, Daniel Vetter, Philipp Zabel, Geert Uytterhoeven,
Kieran Bingham, dri-devel, linux-renesas-soc, Fabrizio Castro,
Prabhakar Mahadev Lad, linux-kernel
Hi Laurent,
> -----Original Message-----
> From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Sent: Friday, June 2, 2023 12:15 PM
> To: Biju Das <biju.das.jz@bp.renesas.com>
> Cc: David Airlie <airlied@gmail.com>; Daniel Vetter <daniel@ffwll.ch>;
> Philipp Zabel <p.zabel@pengutronix.de>; Geert Uytterhoeven
> <geert+renesas@glider.be>; Kieran Bingham
> <kieran.bingham+renesas@ideasonboard.com>; dri-
> devel@lists.freedesktop.org; linux-renesas-soc@vger.kernel.org; Fabrizio
> Castro <fabrizio.castro.jz@renesas.com>; Prabhakar Mahadev Lad
> <prabhakar.mahadev-lad.rj@bp.renesas.com>; linux-kernel@vger.kernel.org
> Subject: Re: [PATCH v9 RESEND 0/5] Add RZ/{G2L,G2LC} and RZ/V2L Display
> Unit support
>
> Hi Biju,
>
> On Thu, Jun 01, 2023 at 12:12:59PM +0000, Biju Das wrote:
> > > Subject: Re: [PATCH v9 RESEND 0/5] Add RZ/{G2L,G2LC} and RZ/V2L
> > > Display Unit support
> > >
> > > On Mon, May 29, 2023 at 02:22:06PM +0000, Biju Das wrote:
> > > > > Subject: Re: [PATCH v9 RESEND 0/5] Add RZ/{G2L,G2LC} and RZ/V2L
> > > > > Display Unit support On Thu, May 25, 2023 at 02:30:10PM +0000,
> > > > > Biju Das wrote:
> > > > > > Hi DRM maintainers,
> > > > > >
> > > > > > Gentle ping.
> > > > >
> > > > > Sorry, I was on holidays the last two weeks.
> > > > >
> > > > > > Are we happy with moving all Renesas drm drivers to Renesas
> > > > > > specific directory or preference is for separate one??
> > > > >
> > > > > This works for me.
> > > > >
> > > > > > If it is later, I can send RZ/G2L drm driver separate.
> > > > > >
> > > > > > Otherwise, I need to rebase and resend.
> > > > >
> > > > > Your series applies cleanly on top of the latest drm-next
> > > > > branch. Is there a specific need to rebase and resend ?
> > > >
> > > > Nope. After my patch series there were some patches from Geert for
> > > > drm/shmobile merged to drm-misc-next by Thomas.
> > > >
> > > > Maybe git managed this automatically??
> > >
> > > Probably, git is nice :-)
> > >
> > > > > I haven't had time to review patch 4/5 (the driver) yet. All the
> > > > > rest looks good to me. Should I already include 1/5 in my next
> > > > > pull
> > > request ?
> > > >
> > > > Yes, please.
> > >
> > > OK, I will do so. I've reviewed 4/5 in the meantime, but changes are
> > > needed, so I won't wait for v10 before applying 1/5.
> >
> > I have incorporated review comments for v9. I need to rebase my
> changes.
> >
> > Is the pull request being done to drm-misc-next?
>
> I've just sent the pull request for drm-next, and have CC'ed you.
Thank you.
Cheers,
Biju
^ permalink raw reply [flat|nested] 20+ messages in thread
* RE: [PATCH v9 RESEND 4/5] drm: Add RZ/G2L DU Support
2023-06-02 11:34 ` Laurent Pinchart
@ 2023-06-02 16:05 ` Biju Das
0 siblings, 0 replies; 20+ messages in thread
From: Biju Das @ 2023-06-02 16:05 UTC (permalink / raw)
To: Laurent Pinchart
Cc: David Airlie, Daniel Vetter, Philipp Zabel, Kieran Bingham,
dri-devel, linux-renesas-soc, Geert Uytterhoeven,
Fabrizio Castro, Prabhakar Mahadev Lad
Hi Laurent,
Thanks for the feedback.
> Subject: Re: [PATCH v9 RESEND 4/5] drm: Add RZ/G2L DU Support
>
> Hi Biju,
>
> On Thu, Jun 01, 2023 at 12:08:44PM +0000, Biju Das wrote:
> > > Subject: Re: [PATCH v9 RESEND 4/5] drm: Add RZ/G2L DU Support
> > >
> > > Hi Biju,
> > >
> > > Thank you for the patch.
> > >
> > > This is a partial review, because the driver is big, and because
> > > some changes in v10 will (hopefully) simplify the code and make
> > > review easier.
> >
> > I agree v10 will simplify the code as I have do clean-ups based on
> > your review commnet.
> >
> > > On Tue, May 02, 2023 at 11:09:11AM +0100, Biju Das wrote:
> > > > The LCD controller is composed of Frame Compression Processor
> > > > (FCPVD), Video Signal Processor (VSPD), and Display Unit (DU).
> > > >
> > > > It has DPI/DSI interfaces and supports a maximum resolution of
> > > > 1080p along with 2 RPFs to support the blending of two picture
> > > > layers and raster operations (ROPs).
> > > >
> > > > The DU module is connected to VSPD. Add RZ/G2L DU support for
> > > > RZ/G2L alike SoCs.
> > > >
> > > > Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
> > > > ---
> > > > Ref:
> > > >
> > > > v8->v9:
> > > > * Dropped reset_control_assert() from error patch for
> rzg2l_du_crtc_get() as
> > > > suggested by Philipp Zabel.
> > > > v7->v8:
> > > > * Dropped RCar du lib and created RZ/G2L DU DRM driver by
> creating rz_du folder.
> > > > * Updated KConfig and Makefile.
> > > > v6->v7:
> > > > * Split DU lib and RZ/G2L du driver as separate patch series as
> > > > DU support added to more platforms based on RZ/G2L alike SoCs.
> > > > * Rebased to latest drm-tip.
> > > > * Added patch #2 for binding support for RZ/V2L DU
> > > > * Added patch #4 for driver support for RZ/V2L DU
> > > > * Added patch #5 for SoC DTSI support for RZ/G2L DU
> > > > * Added patch #6 for SoC DTSI support for RZ/V2L DU
> > > > * Added patch #7 for Enabling DU on SMARC EVK based on
> RZ/{G2L,V2L} SoCs.
> > > > * Added patch #8 for Enabling DU on SMARC EVK based on RZ/G2LC
> SoC.
> > > > ---
> > > > drivers/gpu/drm/renesas/Kconfig | 1 +
> > > > drivers/gpu/drm/renesas/Makefile | 1 +
> > > > drivers/gpu/drm/renesas/rz-du/Kconfig | 20 +
> > > > drivers/gpu/drm/renesas/rz-du/Makefile | 8 +
> > > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c | 714
> > > > ++++++++++++++++ drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.h |
> > > > 99 +++ drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c | 188 +++++
> > > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h | 89 ++
> > > > .../gpu/drm/renesas/rz-du/rzg2l_du_encoder.c | 112 +++
> > > > .../gpu/drm/renesas/rz-du/rzg2l_du_encoder.h | 28 +
> > > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.c | 770
> > > > ++++++++++++++++++ drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.h
> > > > | 43 + drivers/gpu/drm/renesas/rz-du/rzg2l_du_regs.h | 67 ++
> > > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.c | 430 ++++++++++
> > > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.h | 94 +++
> > > > 15 files changed, 2664 insertions(+) create mode 100644
> > > > drivers/gpu/drm/renesas/rz-du/Kconfig
> > > > create mode 100644 drivers/gpu/drm/renesas/rz-du/Makefile
> > > > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c
> > > > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.h
> > > > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c
> > > > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h
> > > > create mode 100644
> > > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.c
> > > > create mode 100644
> > > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.h
> > > > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.c
> > > > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.h
> > > > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_regs.h
> > > > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.c
> > > > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.h
>
> [snip]
>
> > > > diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c
> > > > b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c
> > > > new file mode 100644
> > > > index 000000000000..d61d433d72e6
> > > > --- /dev/null
> > > > +++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c
> > > > @@ -0,0 +1,714 @@
>
> [snip]
>
> > > > +/*
> > > > +-----------------------------------------------------------------
> > > > +------------
> > > > + * CRTC Functions
> > > > + */
> > > > +
> > > > +int __rzg2l_du_crtc_plane_atomic_check(struct drm_plane *plane,
> > > > + struct drm_plane_state *state,
> > > > + const struct rzg2l_du_format_info
> **format)
> > >
> > > This function is only called from rzg2l_du_vsp_plane_atomic_check(),
> > > I would inline it there.
> >
> > Agreed.
> >
> > > > +{
> > > > + struct drm_device *dev = plane->dev;
> > > > + struct drm_crtc_state *crtc_state;
> > > > + int ret;
> > > > +
> > > > + if (!state->crtc) {
> > > > + /*
> > > > + * The visible field is not reset by the DRM core but
> only
> > > > + * updated by drm_plane_helper_check_state(), set it
> manually.
> > > > + */
> > > > + state->visible = false;
> > > > + *format = NULL;
> > > > + return 0;
> > > > + }
> > > > +
> > > > + crtc_state = drm_atomic_get_crtc_state(state->state, state-
> >crtc);
> > > > + if (IS_ERR(crtc_state))
> > > > + return PTR_ERR(crtc_state);
> > > > +
> > > > + ret = drm_atomic_helper_check_plane_state(state, crtc_state,
> > > > + DRM_PLANE_NO_SCALING,
> > > > + DRM_PLANE_NO_SCALING,
> > > > + true, true);
> > > > + if (ret < 0)
> > > > + return ret;
> > > > +
> > > > + if (!state->visible) {
> > > > + *format = NULL;
> > > > + return 0;
> > > > + }
> > > > +
> > > > + *format = rzg2l_du_format_info(state->fb->format->format);
> > > > + if (*format == NULL) {
> > >
> > > Can this happen, or does the DRM core already checks that the
> > > framebuffer format is supported by the plane ?
> >
> > This will make sure the format is as per rzg2l_du_format_info,
> > Otherwise print unsupported format.
>
> I understand that, but it wasn't my question. Does the DRM core check if
> the framebuffer pixel format is supported by the plane, using the
> plane's supported pixel formats specified by the driver when the plane
> was created ? If it does, you could drop this check, as
> rzg2l_du_format_info() should support all the formats that the driver
> specifies as supported by the plane.
>
> I believe the DRM core handles this already, given the
> drm_plane_check_pixel_format() call in drm_atomic_plane_check().
Yes, it handles already. I will drop the check.
As you said it calls drm_atomic_plane_check()
which calls drm_plane_check_pixel_format()
>
> > > > + dev_dbg(dev->dev, "%s: unsupported format %08x\n",
> __func__,
> > > > + state->fb->format->format);
> > > > + return -EINVAL;
> > > > + }
> > > > +
> > > > + return 0;
> > > > +}
>
> [snip]
>
> > > > diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c
> > > > b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c
> > > > new file mode 100644
> > > > index 000000000000..0fea1fea837c
> > > > --- /dev/null
> > > > +++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c
> > > > @@ -0,0 +1,188 @@
>
> [snip]
>
> > > > +static int rzg2l_du_probe(struct platform_device *pdev) {
> > > > + struct rzg2l_du_device *rcdu;
> > > > + int ret;
> > > > +
> > > > + if (drm_firmware_drivers_only())
> > > > + return -ENODEV;
> > > > +
> > > > + /* Allocate and initialize the RZ/G2L device structure. */
> > > > + rcdu = devm_drm_dev_alloc(&pdev->dev, &rzg2l_du_driver,
> > > > + struct rzg2l_du_device, ddev);
> > > > + if (IS_ERR(rcdu))
> > > > + return PTR_ERR(rcdu);
> > > > +
> > > > + rcdu->dev = &pdev->dev;
> > > > + rcdu->info = of_device_get_match_data(rcdu->dev);
> > > > +
> > > > + platform_set_drvdata(pdev, rcdu);
> > > > +
> > > > + /* I/O resources */
> > > > + rcdu->mmio = devm_platform_ioremap_resource(pdev, 0);
> > > > + if (IS_ERR(rcdu->mmio))
> > > > + return PTR_ERR(rcdu->mmio);
> > > > +
> > > > + /*
> > > > + * When sourcing frames from a VSP the DU doesn't perform
> any memory
> > > > + * access so set the DMA coherent mask to 40 bits to accept
> all buffers.
> > > > + */
> > > > + ret = dma_coerce_mask_and_coherent(&pdev->dev,
> DMA_BIT_MASK(40));
> > > > + if (ret)
> > > > + return ret;
> > > > +
> > > > + /* DRM/KMS objects */
> > > > + ret = rzg2l_du_modeset_init(rcdu);
> > > > + if (ret < 0) {
> > > > + if (ret != -EPROBE_DEFER)
> > > > + dev_err(&pdev->dev,
> > > > + "failed to initialize DRM/KMS (%d)\n",
> ret);
> > >
> > > Use dev_err_probe()
> >
> > As per your patch [1], I guess it is not required
> >
> > [1]
>
> If you add dev_err_probe() calls in rzg2l_du_modeset_init() as
> appropriate, like done in [1] :-)
OK will do similar change.
>
> > > > + goto error;
> > > > + }
> > > > +
> > > > + /*
> > > > + * Register the DRM device with the core and the connectors
> with
> > > > + * sysfs.
> > > > + */
> > > > + ret = drm_dev_register(&rcdu->ddev, 0);
> > > > + if (ret)
> > > > + goto error;
> > > > +
> > > > + DRM_INFO("Device %s probed\n", dev_name(&pdev->dev));
> > >
> > > Use drm_info().
> >
> > Agreed.
> >
> > > > +
> > > > + drm_fbdev_generic_setup(&rcdu->ddev, 32);
> > > > +
> > > > + return 0;
> > > > +
> > > > +error:
> > > > + drm_kms_helper_poll_fini(&rcdu->ddev);
> > > > + return ret;
> > > > +}
>
> [snip]
>
> > > > diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h
> > > > b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h
> > > > new file mode 100644
> > > > index 000000000000..3b84e91aa64a
> > > > --- /dev/null
> > > > +++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h
> > > > @@ -0,0 +1,89 @@
>
> [snip]
>
> > > > +enum rzg2l_du_output {
> > > > + RZG2L_DU_OUTPUT_DSI0,
> > > > + RZG2L_DU_OUTPUT_DPAD0,
> > > > + RZG2L_DU_OUTPUT_MAX,
> > > > +};
> > > > +
> > > > +/*
> > > > + * struct rzg2l_du_output_routing - Output routing specification
> > > > + * @possible_crtcs: bitmask of possible CRTCs for the output
> > > > + * @port: device tree port number corresponding to this output
> > > > +route
> > > > + *
> > > > + * The DU has 2 possible outputs (DPAD0, DSI0). Output routing
> > > > +data
> > > > + * specify the valid SoC outputs, which CRTCs can drive the
> > > > +output, and the type
> > > > + * of in-SoC encoder for the output.
> > > > + */
> > > > +struct rzg2l_du_output_routing {
> > > > + unsigned int possible_crtcs;
> > > > + unsigned int port;
> > > > +};
> > > > +
> > > > +/*
> > > > + * struct rzg2l_du_device_info - DU model-specific information
> > > > + * @channels_mask: bit mask of available DU channels
> > > > + * @routes: array of CRTC to output routes, indexed by output
> > > > +(RZG2L_DU_OUTPUT_*) */ struct rzg2l_du_device_info {
> > > > + unsigned int channels_mask;
> > > > + struct rzg2l_du_output_routing routes[RZG2L_DU_OUTPUT_MAX];
> };
> > >
> > > The driver supports a single SoC, with two outputs, connected to the
> > > same DU channel. Do you really need to copy the rzg2l_du_device_info
> > > abstraction from the rcar-du driver, or could you simplify the code
> ?
> >
> > After adding basic support, as an optimization will simplify the code
> > later. Hope it is ok for you??
>
> I'm OK with patches on top. Please don't forget about them :-)
Agreed.
Cheers,
Biju
^ permalink raw reply [flat|nested] 20+ messages in thread
end of thread, other threads:[~2023-06-02 16:05 UTC | newest]
Thread overview: 20+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-05-02 10:09 [PATCH v9 RESEND 0/5] Add RZ/{G2L,G2LC} and RZ/V2L Display Unit support Biju Das
2023-05-02 10:09 ` [PATCH v9 RESEND 1/5] drm: Place Renesas drivers in a separate dir Biju Das
2023-05-02 10:09 ` [PATCH v9 RESEND 2/5] dt-bindings: display: Document Renesas RZ/G2L DU bindings Biju Das
2023-05-29 13:49 ` Laurent Pinchart
2023-05-29 14:04 ` Biju Das
2023-05-02 10:09 ` [PATCH v9 RESEND 3/5] dt-bindings: display: renesas,rzg2l-du: Document RZ/V2L " Biju Das
2023-05-02 10:09 ` [PATCH v9 RESEND 4/5] drm: Add RZ/G2L DU Support Biju Das
2023-05-29 15:43 ` Laurent Pinchart
2023-06-01 12:08 ` Biju Das
2023-06-02 11:34 ` Laurent Pinchart
2023-06-02 16:05 ` Biju Das
2023-05-02 10:09 ` [PATCH v9 RESEND 5/5] MAINTAINERS: Add maintainer for RZ DU drivers Biju Das
2023-05-15 7:57 ` [PATCH v9 RESEND 0/5] Add RZ/{G2L,G2LC} and RZ/V2L Display Unit support Biju Das
2023-05-25 14:30 ` Biju Das
2023-05-29 14:13 ` Laurent Pinchart
2023-05-29 14:22 ` Biju Das
2023-05-29 15:45 ` Laurent Pinchart
2023-06-01 12:12 ` Biju Das
2023-06-02 11:15 ` Laurent Pinchart
2023-06-02 14:20 ` Biju Das
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).