[PATCH v11 0/4] Add RZ/{G2L,G2LC} and RZ/V2L Display Unit support

[PATCH v11 0/4] Add RZ/{G2L,G2LC} and RZ/V2L Display Unit support

[Biju Das]

This path series aims to add support for RZ/G2L DU DRM driver.

RZ/G2L LCD controller composed of Frame compression Processor(FCPVD), Video
signal processor (VSPD) and Display unit(DU). The output of LCDC is
connected to Display parallel interface and MIPI link video interface.
 
The output from DSI is connected to ADV7535.

Ref:
 https://lore.kernel.org/linux-renesas-soc/OS0PR01MB5922717E4CCFE07F3C25FBC986989@OS0PR01MB5922.jpnprd01.prod.outlook.com/#t

This patch series is tested with [2]
[2] https://patchwork.kernel.org/project/linux-renesas-soc/list/?series=742810

v10->v11:
* Replaced CONFIG_DRM_RCAR_VSP->CONFIG_VIDEO_RENESAS_VSP1 for building
  rzg2l_du_vsp driver.
* Dropped "rzg2l_du_regs.h" instead the relevant definitions defined in
  .c file.
* Dropped setting ditr5 based on latest HW manual 1.3.0/1.4.0
* Updated the comment for auto clear.
* Replaced writel()->rzg2l_du_write() in rzg2l_du_start_stop().
* Dropped CRC related functions as it does not have DISCOM.
* Replaced the variable possible_crtcs->possible_outputs in
  struct rzg2l_du_output_routing.
* Updated DMA_BIT_MASK from 40->32.
* Dropped unneeded struct drm_bridge from rzg2l_du_drv.h.
* Dropped colour keying support as it doesn't have planes.
* Added only RGB formats in rzg2l_du_format_infos.
* Dropped chroma planes from rzg2l_du_fb_create().
* Updated the comment for max_pitch in rzg2l_du_fb_create().
* Dropped possible_crtcs check in rzg2l_du_encoders_init().
* Dropped additional empty line from struct rzg2l_du_device.
v9->v10:
 * patch#1 is mainlined, so dropped from this series.
 * Added Rb tag from Laurent for the binding patch.
 * Updated the commit description.
 * Updated description of the port by dropping the text "specified in
   Documentation/devicetree/bindings/graph.txt."
 * Dropped empty endpoint from example.
 * Dropped ARM64 dependency from Kconfig.
 * Sorted the configs alphabetically in Kconfig.
 * Dropped DRM_RCAR_VSP config option and make DRM_RZG2L_DU depend on
   VIDEO_RENESAS_VSP1.
 * On rzg2l_du_crtc_set_display_timing() replaced the setting of parent
   clk rate with dclk rate.
 * Added rzg2l_du_write() wrapper function.
 * Updated the comment atomic_begin->atomic_flush.
 * Dropped .atomic_check and .atomic_begin callback
 * Renamed __rzg2l_du_crtc_plane_atomic_check->__rzg2l_du_vsp_plane_atomic
   _check and moved it to rzg2l_du_vsp.c
 * Added struct clk in rzg2l_du_crtc.h
 * Dropped the variables mmio_offset,index,vblank_lock,vblank_wait,
   vblank_count from struct rzg2l_du_crtc.
 * Replaced the macro to_rzg2l_crtc with static inline functions.
 * Dropped the unneeded header files clk.h, io.h, mm.h, pm.h, slab.h,
   wait.h and drm_managed.h from rzg2l_du_drv.c.
 * Replaced DRM_INFO->drm_info
 * Dropped the callbacks prime_handle_to_fd, prime_fd_to_handle and
   gem_prime_mmap.
 * Replaced the callback remove->remove_new.
 * Dropped header file wait.h and added forward declarations struct clk and
   rzg2l_du_device from rzg2l_du_drv.h.
 * Dropped the dsi and dpad0_source variables from struct rzg2l_du_device.
 * Replaced the macro to_rzg2l_encoder with static inline functions.
 * Dropped header files dma-buf.h and wait.h from rzg2l_du_kms.c.
 * Dropped struct sg_table and added the scatterlist.h header file in
   rzg2l_du_vsp.h
 * Added container_of.h header file, forward declarations struct device and
   struct rzg2l_du_device in rzg2l_du_vsp.h.
v8->v9:
 * Added Rb tag from Laurent and Acked-by tag from Kieran for patch#1.
 * Added Rb tag from Laurent and Geert for patch#3.
 * Dropped reset_control_assert() from error patch for rzg2l_du_crtc_get() as
   suggested by Philipp Zabel.
 * Added Rb tag from Laurent oatch#5.
 * Updated MAINTAINERS entries for common parts(Makefile and Kconfig).
v7->v8:
 * Moved rcar-du and shmobile DRM drivers to renesas specific vendor directory.
 * Fixed the typo vsp2->du in RZ/V2L DU bindings patch.
 * Added Rb tag from Rob for RZ/V2L DU bindings patch.
 * Dropped RCar du lib and created RZ/G2L DU DRM driver by creating rz_du folder.
 * Updated MAINTAINERS entries.
v6->v7:
 * Split DU lib and  RZ/G2L du driver as separate patch series as
   DU support added to more platforms based on RZ/G2L alike SoCs.
 * Rebased to latest drm-tip.
 * Added patch #2 for binding support for RZ/V2L DU
 * Added patch #4 for driver support for RZ/V2L DU
 * Added patch #5 for SoC DTSI support for RZ/G2L DU
 * Added patch #6 for SoC DTSI support for RZ/V2L DU
 * Added patch #7 for Enabling DU on SMARC EVK based on RZ/{G2L,V2L} SoCs.
 * Added patch #8 for Enabling DU on SMARC EVK based on RZ/G2LC SoC.
v5->v6:
 * Merged DU lib and RZ/G2L du driver in same patch series
 * Rebased to latest drm-misc.
 * Merged patch#1 to RZ/G2L Driver patch.
 * Updated KConfig dependency from ARCH_RENESAS->ARCH_RZG2L.
 * Optimized rzg2l_du_output_name() by removing unsupported outputs.

v4->v5:
 * Added Rb tag from Rob for binding patch.
 * Started using RCar DU libs(kms, vsp and encoder)
 * Started using rcar_du_device, rcar_du_write, rcar_du_crtc,
   rcar_du_format_info and rcar_du_encoder.
v3->v4:
 * Changed compatible name from renesas,du-r9a07g044->renesas,r9a07g044-du
 * started using same compatible for RZ/G2{L,LC}
 * Removed rzg2l_du_group.h and struct rzg2l_du_group
 * Renamed __rzg2l_du_group_start_stop->rzg2l_du_start_stop
 * Removed rzg2l_du_group_restart
 * Updated rzg2l_du_crtc_set_display_timing
 * Removed mode_valid callback.
 * Updated rzg2l_du_crtc_create() parameters
 * Updated compatible
 * Removed RZG2L_DU_MAX_GROUPS
V2->v3:
 * Added new bindings for RZ/G2L DU
 * Removed indirection and created new DRM driver based on R-Car DU
v1->v2:
 * Based on [1], all references to 'rzg2l_lcdc' replaced with 'rzg2l_du'
 * Updated commit description for bindings
 * Removed LCDC references from bindings
 * Changed clock name from du.0->aclk from bindings
 * Changed reset name from du.0->du from bindings
 * Replaced crtc_helper_funcs->rcar_crtc_helper_funcs
 * Updated macro DRM_RZG2L_LCDC->DRM_RZG2L_DU
 * Replaced rzg2l-lcdc-drm->rzg2l-du-drm
 * Added forward declaration for struct reset_control

[1] https://patchwork.kernel.org/project/linux-renesas-soc/patch/20220312084205.31462-2-biju.das.jz@bp.renesas.com/

Biju Das (4):
  dt-bindings: display: Document Renesas RZ/G2L DU bindings
  dt-bindings: display: renesas,rzg2l-du: Document RZ/V2L DU bindings
  drm: renesas: Add RZ/G2L DU Support
  MAINTAINERS: Add maintainer for RZ DU drivers

 .../bindings/display/renesas,rzg2l-du.yaml    | 126 +++++
 MAINTAINERS                                   |  15 +-
 drivers/gpu/drm/renesas/Kconfig               |   1 +
 drivers/gpu/drm/renesas/Makefile              |   1 +
 drivers/gpu/drm/renesas/rz-du/Kconfig         |  12 +
 drivers/gpu/drm/renesas/rz-du/Makefile        |   8 +
 drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c | 438 ++++++++++++++++
 drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.h |  89 ++++
 drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c  | 176 +++++++
 drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h  |  78 +++
 .../gpu/drm/renesas/rz-du/rzg2l_du_encoder.c  |  72 +++
 .../gpu/drm/renesas/rz-du/rzg2l_du_encoder.h  |  32 ++
 drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.c  | 441 ++++++++++++++++
 drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.h  |  43 ++
 drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.c  | 469 ++++++++++++++++++
 drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.h  |  97 ++++
 16 files changed, 2096 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml
 create mode 100644 drivers/gpu/drm/renesas/rz-du/Kconfig
 create mode 100644 drivers/gpu/drm/renesas/rz-du/Makefile
 create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c
 create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.h
 create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c
 create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h
 create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.c
 create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.h
 create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.c
 create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.h
 create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.c
 create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.h

-- 
2.25.1

[PATCH v11 1/4] dt-bindings: display: Document Renesas RZ/G2L DU bindings

[Biju Das]

The RZ/G2L LCD controller is composed of Frame Compression Processor
(FCPVD), Video Signal Processor (VSPD), and Display Unit (DU).

The DU module supports the following hardware features
− Display Parallel Interface (DPI) and MIPI LINK Video Interface
− Display timing master
− Generates video timings
− Selecting the polarity of output DCLK, HSYNC, VSYNC, and DE
− Supports Progressive
− Input data format (from VSPD): RGB888, RGB666
− Output data format: same as Input data format
− Supporting Full HD (1920 pixels x 1080 lines) for MIPI-DSI Output
− Supporting WXGA (1280 pixels x 800 lines) for Parallel Output

This patch documents the DU module found on RZ/G2L LCDC.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
v10->v1:
 * No change
v9->v10:
 * Added Rb tag from Laurent
 * Updated the commit description.
 * Updated description of the port by dropping the text "specified in
   Documentation/devicetree/bindings/graph.txt."
 * Dropped empty endpoint from example.
v8->v9:
 * No change
v7->v8:
 * No change
v6->v7:
 * No change
v5->v6:
 * No change.
v4->v5:
 * Added Rb tag from Rob.
v3->v4:
 * Changed compatible name from renesas,du-r9a07g044->renesas,r9a07g044-du
 * started using same compatible for RZ/G2{L,LC}
v3: New patch
---
 .../bindings/display/renesas,rzg2l-du.yaml    | 121 ++++++++++++++++++
 1 file changed, 121 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml

diff --git a/Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml b/Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml
new file mode 100644
index 000000000000..9ffe5be04c23
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/renesas,rzg2l-du.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/G2L Display Unit (DU)
+
+maintainers:
+  - Biju Das <biju.das.jz@bp.renesas.com>
+  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+
+description: |
+  These DT bindings describe the Display Unit embedded in the Renesas RZ/G2L
+  and RZ/V2L SoCs.
+
+properties:
+  compatible:
+    enum:
+      - renesas,r9a07g044-du # RZ/G2{L,LC}
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Main clock
+      - description: Register access clock
+      - description: Video clock
+
+  clock-names:
+    items:
+      - const: aclk
+      - const: pclk
+      - const: vclk
+
+  resets:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description: |
+      The connections to the DU output video ports are modeled using the OF
+      graph bindings. The number of ports and their assignment are
+      model-dependent. Each port shall have a single endpoint.
+
+    patternProperties:
+      "^port@[0-1]$":
+        $ref: /schemas/graph.yaml#/properties/port
+        unevaluatedProperties: false
+
+    required:
+      - port@0
+
+    unevaluatedProperties: false
+
+  renesas,vsps:
+    $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    items:
+      items:
+        - description: phandle to VSP instance that serves the DU channel
+        - description: Channel index identifying the LIF instance in that VSP
+    description:
+      A list of phandle and channel index tuples to the VSPs that handle the
+      memory interfaces for the DU channels.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - power-domains
+  - ports
+  - renesas,vsps
+
+additionalProperties: false
+
+examples:
+  # RZ/G2L DU
+  - |
+    #include <dt-bindings/clock/r9a07g044-cpg.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    display@10890000 {
+        compatible = "renesas,r9a07g044-du";
+        reg = <0x10890000 0x10000>;
+        interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD R9A07G044_LCDC_CLK_A>,
+                 <&cpg CPG_MOD R9A07G044_LCDC_CLK_P>,
+                 <&cpg CPG_MOD R9A07G044_LCDC_CLK_D>;
+        clock-names = "aclk", "pclk", "vclk";
+        resets = <&cpg R9A07G044_LCDC_RESET_N>;
+        power-domains = <&cpg>;
+
+        renesas,vsps = <&vspd0 0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                endpoint {
+                    remote-endpoint = <&dsi0_in>;
+                };
+            };
+            port@1 {
+                reg = <1>;
+            };
+        };
+    };
+
+...
-- 
2.25.1

[PATCH v11 2/4] dt-bindings: display: renesas,rzg2l-du: Document RZ/V2L DU bindings

[Biju Das]

Document DU found in RZ/V2L SoC. The DU block is identical to RZ/G2L
SoC and therefore use RZ/G2L fallback to avoid any driver changes.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v10->v11:
 * No change.
v9->v10:
 * No change.
V8->v9:
 * Added Rb tag from Laurent and Geert.
v7->v8:
 * Fixed the typo vsp2->du
 * Added Rb tag from Rob as the change is trivial.
v7:
 * New patch.
---
 .../devicetree/bindings/display/renesas,rzg2l-du.yaml    | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml b/Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml
index 9ffe5be04c23..11e88f9e024f 100644
--- a/Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml
+++ b/Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml
@@ -16,8 +16,13 @@ description: |
 
 properties:
   compatible:
-    enum:
-      - renesas,r9a07g044-du # RZ/G2{L,LC}
+    oneOf:
+      - enum:
+          - renesas,r9a07g044-du # RZ/G2{L,LC}
+      - items:
+          - enum:
+              - renesas,r9a07g054-du    # RZ/V2L
+          - const: renesas,r9a07g044-du # RZ/G2L fallback
 
   reg:
     maxItems: 1
-- 
2.25.1

[PATCH v11 3/4] drm: renesas: Add RZ/G2L DU Support

[Biju Das]

The LCD controller is composed of Frame Compression Processor (FCPVD),
Video Signal Processor (VSPD), and Display Unit (DU).

It has DPI/DSI interfaces and supports a maximum resolution of 1080p
along with 2 RPFs to support the blending of two picture layers and
raster operations (ROPs).

The DU module is connected to VSPD. Add RZ/G2L DU support for RZ/G2L
alike SoCs.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
Ref:
 https://lore.kernel.org/linux-renesas-soc/OS0PR01MB5922717E4CCFE07F3C25FBC986989@OS0PR01MB5922.jpnprd01.prod.outlook.com/#t
v10->v11:
* Replaced CONFIG_DRM_RCAR_VSP->CONFIG_VIDEO_RENESAS_VSP1 for building
  rzg2l_du_vsp driver.
* Dropped "rzg2l_du_regs.h" instead the relevant definitions defined in
  .c file.
* Dropped setting ditr5 based on latest HW manual 1.3.0/1.4.0
* Updated the comment for auto clear.
* Replaced writel()->rzg2l_du_write() in rzg2l_du_start_stop().
* Dropped CRC related functions as it does not have DISCOM.
* Replaced the variable possible_crtcs->possible_outputs in
  struct rzg2l_du_output_routing.
* Updated DMA_BIT_MASK from 40->32.
* Dropped unneeded struct drm_bridge from rzg2l_du_drv.h.
* Dropped colour keying support as it doesn't have planes.
* Added only RGB formats in rzg2l_du_format_infos.
* Dropped chroma planes from rzg2l_du_fb_create().
* Updated the comment for max_pitch in rzg2l_du_fb_create().
* Dropped possible_crtcs check in rzg2l_du_encoders_init().
* Dropped additional empty line from struct rzg2l_du_device.
v9->v10:
 * Dropped ARM64 dependency from Kconfig.
 * Sorted the configs alphabetically in Kconfig.
 * Dropped DRM_RCAR_VSP config option and make DRM_RZG2L_DU depend on
   VIDEO_RENESAS_VSP1.
 * On rzg2l_du_crtc_set_display_timing() replaced the setting of parent
   clk rate with dclk rate.
 * Added rzg2l_du_write() wrapper function.
 * Updated the comment atomic_begin->atomic_flush.
 * Dropped .atomic_check and .atomic_begin callback
 * Renamed __rzg2l_du_crtc_plane_atomic_check->__rzg2l_du_vsp_plane_atomic
   _check and moved it to rzg2l_du_vsp.c
 * Added struct clk in rzg2l_du_crtc.h
 * Dropped the variables mmio_offset,index,vblank_lock,vblank_wait,
   vblank_count from struct rzg2l_du_crtc.
 * Replaced the macro to_rzg2l_crtc with static inline functions.
 * Dropped the unneeded header files clk.h, io.h, mm.h, pm.h, slab.h,
   wait.h and drm_managed.h from rzg2l_du_drv.c.
 * Replaced DRM_INFO->drm_info
 * Dropped the callbacks prime_handle_to_fd, prime_fd_to_handle and
   gem_prime_mmap.
 * Replaced the callback remove->remove_new.
 * Dropped header file wait.h and added forward declarations struct clk and
   rzg2l_du_device from rzg2l_du_drv.h.
 * Dropped the dsi and dpad0_source variables from struct rzg2l_du_device.
 * Replaced the macro to_rzg2l_encoder with static inline functions.
 * Dropped header files dma-buf.h and wait.h from rzg2l_du_kms.c.
 * Dropped struct sg_table and added the scatterlist.h header file in
   rzg2l_du_vsp.h
 * Added container_of.h header file, forward declarations struct device and
   struct rzg2l_du_device in rzg2l_du_vsp.h.
v8->v9:
 * Dropped reset_control_assert() from error patch for rzg2l_du_crtc_get() as
   suggested by Philipp Zabel.
v7->v8:
 * Dropped RCar du lib and created RZ/G2L DU DRM driver by creating rz_du folder.
 * Updated KConfig and Makefile.
v6->v7:
 * Split DU lib and  RZ/G2L du driver as separate patch series as
   DU support added to more platforms based on RZ/G2L alike SoCs.
 * Rebased to latest drm-tip.
 * Added patch #2 for binding support for RZ/V2L DU
 * Added patch #4 for driver support for RZ/V2L DU
 * Added patch #5 for SoC DTSI support for RZ/G2L DU
 * Added patch #6 for SoC DTSI support for RZ/V2L DU
 * Added patch #7 for Enabling DU on SMARC EVK based on RZ/{G2L,V2L} SoCs.
 * Added patch #8 for Enabling DU on SMARC EVK based on RZ/G2LC SoC.
---
 drivers/gpu/drm/renesas/Kconfig               |   1 +
 drivers/gpu/drm/renesas/Makefile              |   1 +
 drivers/gpu/drm/renesas/rz-du/Kconfig         |  12 +
 drivers/gpu/drm/renesas/rz-du/Makefile        |   8 +
 drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c | 438 ++++++++++++++++
 drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.h |  89 ++++
 drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c  | 176 +++++++
 drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h  |  78 +++
 .../gpu/drm/renesas/rz-du/rzg2l_du_encoder.c  |  72 +++
 .../gpu/drm/renesas/rz-du/rzg2l_du_encoder.h  |  32 ++
 drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.c  | 441 ++++++++++++++++
 drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.h  |  43 ++
 drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.c  | 469 ++++++++++++++++++
 drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.h  |  97 ++++
 14 files changed, 1957 insertions(+)
 create mode 100644 drivers/gpu/drm/renesas/rz-du/Kconfig
 create mode 100644 drivers/gpu/drm/renesas/rz-du/Makefile
 create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c
 create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.h
 create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c
 create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h
 create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.c
 create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.h
 create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.c
 create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.h
 create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.c
 create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.h

diff --git a/drivers/gpu/drm/renesas/Kconfig b/drivers/gpu/drm/renesas/Kconfig
index 3777dad17f81..21862a8ef710 100644
--- a/drivers/gpu/drm/renesas/Kconfig
+++ b/drivers/gpu/drm/renesas/Kconfig
@@ -1,4 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0-only
 
 source "drivers/gpu/drm/renesas/rcar-du/Kconfig"
+source "drivers/gpu/drm/renesas/rz-du/Kconfig"
 source "drivers/gpu/drm/renesas/shmobile/Kconfig"
diff --git a/drivers/gpu/drm/renesas/Makefile b/drivers/gpu/drm/renesas/Makefile
index ec0e89e7a592..b8d8bc53967f 100644
--- a/drivers/gpu/drm/renesas/Makefile
+++ b/drivers/gpu/drm/renesas/Makefile
@@ -1,4 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
 
 obj-y += rcar-du/
+obj-y += rz-du/
 obj-$(CONFIG_DRM_SHMOBILE) += shmobile/
diff --git a/drivers/gpu/drm/renesas/rz-du/Kconfig b/drivers/gpu/drm/renesas/rz-du/Kconfig
new file mode 100644
index 000000000000..5f0db2c5fee6
--- /dev/null
+++ b/drivers/gpu/drm/renesas/rz-du/Kconfig
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-2.0
+config DRM_RZG2L_DU
+	tristate "DRM Support for RZ/G2L Display Unit"
+	depends on ARCH_RZG2L || COMPILE_TEST
+	depends on DRM && OF
+	depends on VIDEO_RENESAS_VSP1
+	select DRM_GEM_DMA_HELPER
+	select DRM_KMS_HELPER
+	select VIDEOMODE_HELPERS
+	help
+	  Choose this option if you have an RZ/G2L alike chipset.
+	  If M is selected the module will be called rzg2l-du-drm.
diff --git a/drivers/gpu/drm/renesas/rz-du/Makefile b/drivers/gpu/drm/renesas/rz-du/Makefile
new file mode 100644
index 000000000000..663b82a2577f
--- /dev/null
+++ b/drivers/gpu/drm/renesas/rz-du/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0
+rzg2l-du-drm-y := rzg2l_du_crtc.o \
+		  rzg2l_du_drv.o \
+		  rzg2l_du_encoder.o \
+		  rzg2l_du_kms.o \
+
+rzg2l-du-drm-$(CONFIG_VIDEO_RENESAS_VSP1)	+= rzg2l_du_vsp.o
+obj-$(CONFIG_DRM_RZG2L_DU)		+= rzg2l-du-drm.o
diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c
new file mode 100644
index 000000000000..a01ff533f84b
--- /dev/null
+++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c
@@ -0,0 +1,438 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * RZ/G2L Display Unit CRTCs
+ *
+ * Copyright (C) 2023 Renesas Electronics Corporation
+ *
+ * Based on rcar_du_crtc.c
+ */
+
+#include <linux/clk.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+
+#include <drm/drm_atomic.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_bridge.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_device.h>
+#include <drm/drm_framebuffer.h>
+#include <drm/drm_gem_dma_helper.h>
+#include <drm/drm_vblank.h>
+
+#include "rzg2l_du_crtc.h"
+#include "rzg2l_du_drv.h"
+#include "rzg2l_du_encoder.h"
+#include "rzg2l_du_kms.h"
+#include "rzg2l_du_vsp.h"
+
+#define DU_MCR0			0x00
+#define DU_MCR0_DPI_OE		BIT(0)
+#define DU_MCR0_DI_EN		BIT(8)
+#define DU_MCR0_PB_CLR		BIT(16)
+
+#define DU_DITR0		0x10
+#define DU_DITR0_DPI_CLKMD	BIT(0)
+#define DU_DITR0_DEMD_LOW	0x0
+#define DU_DITR0_DEMD_HIGH	(BIT(8) | BIT(9))
+#define DU_DITR0_VSPOL		BIT(16)
+#define DU_DITR0_HSPOL		BIT(17)
+
+#define DU_DITR1		0x14
+#define DU_DITR1_VSA(x)		((x) << 0)
+#define DU_DITR1_VACTIVE(x)	((x) << 16)
+
+#define DU_DITR2		0x18
+#define DU_DITR2_VBP(x)		((x) << 0)
+#define DU_DITR2_VFP(x)		((x) << 16)
+
+#define DU_DITR3		0x1c
+#define DU_DITR3_HSA(x)		((x) << 0)
+#define DU_DITR3_HACTIVE(x)	((x) << 16)
+
+#define DU_DITR4		0x20
+#define DU_DITR4_HBP(x)		((x) << 0)
+#define DU_DITR4_HFP(x)		((x) << 16)
+
+#define DU_MCR1			0x40
+#define DU_MCR1_PB_AUTOCLR	BIT(16)
+
+#define DU_PBCR0		0x4c
+#define DU_PBCR0_PB_DEP(x)	((x) << 0)
+
+static inline void rzg2l_du_write(struct rzg2l_du_device *rcdu, u32 reg, u32 data)
+{
+	writel(data, rcdu->mmio + reg);
+}
+
+/* -----------------------------------------------------------------------------
+ * Hardware Setup
+ */
+
+static void rzg2l_du_crtc_set_display_timing(struct rzg2l_du_crtc *rcrtc)
+{
+	const struct drm_display_mode *mode = &rcrtc->crtc.state->adjusted_mode;
+	unsigned long mode_clock = mode->clock * 1000;
+	u32 ditr0, ditr1, ditr2, ditr3, ditr4, pbcr0;
+	struct rzg2l_du_device *rcdu = rcrtc->dev;
+
+	clk_prepare_enable(rcrtc->rzg2l_clocks.dclk);
+	clk_set_rate(rcrtc->rzg2l_clocks.dclk, mode_clock);
+
+	ditr0 = (DU_DITR0_DEMD_HIGH
+	      | ((mode->flags & DRM_MODE_FLAG_PVSYNC) ? DU_DITR0_VSPOL : 0)
+	      | ((mode->flags & DRM_MODE_FLAG_PHSYNC) ? DU_DITR0_HSPOL : 0));
+
+	ditr1 = DU_DITR1_VSA(mode->vsync_end - mode->vsync_start)
+	      | DU_DITR1_VACTIVE(mode->vdisplay);
+
+	ditr2 = DU_DITR2_VBP(mode->vtotal - mode->vsync_end)
+	      | DU_DITR2_VFP(mode->vsync_start - mode->vdisplay);
+
+	ditr3 = DU_DITR3_HSA(mode->hsync_end - mode->hsync_start)
+	      | DU_DITR3_HACTIVE(mode->hdisplay);
+
+	ditr4 = DU_DITR4_HBP(mode->htotal - mode->hsync_end)
+	      | DU_DITR4_HFP(mode->hsync_start - mode->hdisplay);
+
+	pbcr0 = DU_PBCR0_PB_DEP(0x1f);
+
+	rzg2l_du_write(rcdu, DU_DITR0, ditr0);
+	rzg2l_du_write(rcdu, DU_DITR1, ditr1);
+	rzg2l_du_write(rcdu, DU_DITR2, ditr2);
+	rzg2l_du_write(rcdu, DU_DITR3, ditr3);
+	rzg2l_du_write(rcdu, DU_DITR4, ditr4);
+	rzg2l_du_write(rcdu, DU_PBCR0, pbcr0);
+
+	/* Enable auto clear */
+	rzg2l_du_write(rcdu, DU_MCR1, DU_MCR1_PB_AUTOCLR);
+}
+
+/* -----------------------------------------------------------------------------
+ * Page Flip
+ */
+
+void rzg2l_du_crtc_finish_page_flip(struct rzg2l_du_crtc *rcrtc)
+{
+	struct drm_pending_vblank_event *event;
+	struct drm_device *dev = rcrtc->crtc.dev;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->event_lock, flags);
+	event = rcrtc->event;
+	rcrtc->event = NULL;
+	spin_unlock_irqrestore(&dev->event_lock, flags);
+
+	if (!event)
+		return;
+
+	spin_lock_irqsave(&dev->event_lock, flags);
+	drm_crtc_send_vblank_event(&rcrtc->crtc, event);
+	wake_up(&rcrtc->flip_wait);
+	spin_unlock_irqrestore(&dev->event_lock, flags);
+
+	drm_crtc_vblank_put(&rcrtc->crtc);
+}
+
+static bool rzg2l_du_crtc_page_flip_pending(struct rzg2l_du_crtc *rcrtc)
+{
+	struct drm_device *dev = rcrtc->crtc.dev;
+	unsigned long flags;
+	bool pending;
+
+	spin_lock_irqsave(&dev->event_lock, flags);
+	pending = rcrtc->event;
+	spin_unlock_irqrestore(&dev->event_lock, flags);
+
+	return pending;
+}
+
+static void rzg2l_du_crtc_wait_page_flip(struct rzg2l_du_crtc *rcrtc)
+{
+	struct rzg2l_du_device *rcdu = rcrtc->dev;
+
+	if (wait_event_timeout(rcrtc->flip_wait,
+			       !rzg2l_du_crtc_page_flip_pending(rcrtc),
+			       msecs_to_jiffies(50)))
+		return;
+
+	dev_warn(rcdu->dev, "page flip timeout\n");
+
+	rzg2l_du_crtc_finish_page_flip(rcrtc);
+}
+
+/* -----------------------------------------------------------------------------
+ * Start/Stop and Suspend/Resume
+ */
+
+static void rzg2l_du_crtc_setup(struct rzg2l_du_crtc *rcrtc)
+{
+	/* Configure display timings and output routing */
+	rzg2l_du_crtc_set_display_timing(rcrtc);
+
+	/* Enable the VSP compositor. */
+	rzg2l_du_vsp_enable(rcrtc);
+
+	/* Turn vertical blanking interrupt reporting on. */
+	drm_crtc_vblank_on(&rcrtc->crtc);
+}
+
+static int rzg2l_du_crtc_get(struct rzg2l_du_crtc *rcrtc)
+{
+	int ret;
+
+	/*
+	 * Guard against double-get, as the function is called from both the
+	 * .atomic_enable() and .atomic_flush() handlers.
+	 */
+	if (rcrtc->initialized)
+		return 0;
+
+	ret = clk_prepare_enable(rcrtc->rzg2l_clocks.aclk);
+	if (ret < 0)
+		return ret;
+
+	ret = clk_prepare_enable(rcrtc->rzg2l_clocks.pclk);
+	if (ret < 0)
+		goto error_bus_clock;
+
+	ret = reset_control_deassert(rcrtc->rstc);
+	if (ret < 0)
+		goto error_peri_clock;
+
+	rzg2l_du_crtc_setup(rcrtc);
+	rcrtc->initialized = true;
+
+	return 0;
+
+error_peri_clock:
+	clk_disable_unprepare(rcrtc->rzg2l_clocks.pclk);
+error_bus_clock:
+	clk_disable_unprepare(rcrtc->rzg2l_clocks.aclk);
+	return ret;
+}
+
+static void rzg2l_du_crtc_put(struct rzg2l_du_crtc *rcrtc)
+{
+	clk_disable_unprepare(rcrtc->rzg2l_clocks.dclk);
+	reset_control_assert(rcrtc->rstc);
+	clk_disable_unprepare(rcrtc->rzg2l_clocks.pclk);
+	clk_disable_unprepare(rcrtc->rzg2l_clocks.aclk);
+
+	rcrtc->initialized = false;
+}
+
+static void rzg2l_du_start_stop(struct rzg2l_du_crtc *rcrtc, bool start)
+{
+	rzg2l_du_write(rcrtc->dev, DU_MCR0, start ? DU_MCR0_DI_EN : 0);
+}
+
+static void rzg2l_du_crtc_start(struct rzg2l_du_crtc *rcrtc)
+{
+	rzg2l_du_start_stop(rcrtc, true);
+}
+
+static void rzg2l_du_crtc_stop(struct rzg2l_du_crtc *rcrtc)
+{
+	struct drm_crtc *crtc = &rcrtc->crtc;
+
+	/*
+	 * Disable vertical blanking interrupt reporting. We first need to wait
+	 * for page flip completion before stopping the CRTC as userspace
+	 * expects page flips to eventually complete.
+	 */
+	rzg2l_du_crtc_wait_page_flip(rcrtc);
+	drm_crtc_vblank_off(crtc);
+
+	/* Disable the VSP compositor. */
+	rzg2l_du_vsp_disable(rcrtc);
+
+	rzg2l_du_start_stop(rcrtc, false);
+}
+
+/* -----------------------------------------------------------------------------
+ * CRTC Functions
+ */
+
+static void rzg2l_du_crtc_atomic_enable(struct drm_crtc *crtc,
+					struct drm_atomic_state *state)
+{
+	struct rzg2l_du_crtc *rcrtc = to_rzg2l_crtc(crtc);
+
+	rzg2l_du_crtc_get(rcrtc);
+
+	rzg2l_du_crtc_start(rcrtc);
+}
+
+static void rzg2l_du_crtc_atomic_disable(struct drm_crtc *crtc,
+					 struct drm_atomic_state *state)
+{
+	struct rzg2l_du_crtc *rcrtc = to_rzg2l_crtc(crtc);
+
+	rzg2l_du_crtc_stop(rcrtc);
+	rzg2l_du_crtc_put(rcrtc);
+
+	spin_lock_irq(&crtc->dev->event_lock);
+	if (crtc->state->event) {
+		drm_crtc_send_vblank_event(crtc, crtc->state->event);
+		crtc->state->event = NULL;
+	}
+	spin_unlock_irq(&crtc->dev->event_lock);
+}
+
+static void rzg2l_du_crtc_atomic_flush(struct drm_crtc *crtc,
+				       struct drm_atomic_state *state)
+{
+	struct rzg2l_du_crtc *rcrtc = to_rzg2l_crtc(crtc);
+	struct drm_device *dev = rcrtc->crtc.dev;
+	unsigned long flags;
+
+	WARN_ON(!crtc->state->enable);
+
+	/*
+	 * If a mode set is in progress we can be called with the CRTC disabled.
+	 * We thus need to first get and setup the CRTC in order to configure
+	 * planes. We must *not* put the CRTC, as it must be kept awake until
+	 * the .atomic_enable() call that will follow. The get operation in
+	 * .atomic_enable() will in that case be a no-op, and the CRTC will be
+	 * put later in .atomic_disable().
+	 */
+	rzg2l_du_crtc_get(rcrtc);
+
+	if (crtc->state->event) {
+		WARN_ON(drm_crtc_vblank_get(crtc) != 0);
+
+		spin_lock_irqsave(&dev->event_lock, flags);
+		rcrtc->event = crtc->state->event;
+		crtc->state->event = NULL;
+		spin_unlock_irqrestore(&dev->event_lock, flags);
+	}
+
+	rzg2l_du_vsp_atomic_flush(rcrtc);
+}
+
+static const struct drm_crtc_helper_funcs crtc_helper_funcs = {
+	.atomic_flush = rzg2l_du_crtc_atomic_flush,
+	.atomic_enable = rzg2l_du_crtc_atomic_enable,
+	.atomic_disable = rzg2l_du_crtc_atomic_disable,
+};
+
+static struct drm_crtc_state *
+rzg2l_du_crtc_atomic_duplicate_state(struct drm_crtc *crtc)
+{
+	struct rzg2l_du_crtc_state *state;
+	struct rzg2l_du_crtc_state *copy;
+
+	if (WARN_ON(!crtc->state))
+		return NULL;
+
+	state = to_rzg2l_crtc_state(crtc->state);
+	copy = kmemdup(state, sizeof(*state), GFP_KERNEL);
+	if (!copy)
+		return NULL;
+
+	__drm_atomic_helper_crtc_duplicate_state(crtc, &copy->state);
+
+	return &copy->state;
+}
+
+static void rzg2l_du_crtc_atomic_destroy_state(struct drm_crtc *crtc,
+					       struct drm_crtc_state *state)
+{
+	__drm_atomic_helper_crtc_destroy_state(state);
+	kfree(to_rzg2l_crtc_state(state));
+}
+
+static void rzg2l_du_crtc_reset(struct drm_crtc *crtc)
+{
+	struct rzg2l_du_crtc_state *state;
+
+	if (crtc->state) {
+		rzg2l_du_crtc_atomic_destroy_state(crtc, crtc->state);
+		crtc->state = NULL;
+	}
+
+	state = kzalloc(sizeof(*state), GFP_KERNEL);
+	if (!state)
+		return;
+
+	__drm_atomic_helper_crtc_reset(crtc, &state->state);
+}
+
+static int rzg2l_du_crtc_enable_vblank(struct drm_crtc *crtc)
+{
+	struct rzg2l_du_crtc *rcrtc = to_rzg2l_crtc(crtc);
+
+	rcrtc->vblank_enable = true;
+
+	return 0;
+}
+
+static void rzg2l_du_crtc_disable_vblank(struct drm_crtc *crtc)
+{
+	struct rzg2l_du_crtc *rcrtc = to_rzg2l_crtc(crtc);
+
+	rcrtc->vblank_enable = false;
+}
+
+static const struct drm_crtc_funcs crtc_funcs_rz = {
+	.reset = rzg2l_du_crtc_reset,
+	.destroy = drm_crtc_cleanup,
+	.set_config = drm_atomic_helper_set_config,
+	.page_flip = drm_atomic_helper_page_flip,
+	.atomic_duplicate_state = rzg2l_du_crtc_atomic_duplicate_state,
+	.atomic_destroy_state = rzg2l_du_crtc_atomic_destroy_state,
+	.enable_vblank = rzg2l_du_crtc_enable_vblank,
+	.disable_vblank = rzg2l_du_crtc_disable_vblank,
+};
+
+/* -----------------------------------------------------------------------------
+ * Initialization
+ */
+
+int rzg2l_du_crtc_create(struct rzg2l_du_device *rcdu)
+{
+	struct rzg2l_du_crtc *rcrtc = &rcdu->crtcs[0];
+	struct drm_crtc *crtc = &rcrtc->crtc;
+	struct drm_plane *primary;
+	int ret;
+
+	rcrtc->rstc = devm_reset_control_get_shared(rcdu->dev, NULL);
+	if (IS_ERR(rcrtc->rstc)) {
+		dev_err(rcdu->dev, "can't get cpg reset\n");
+		return PTR_ERR(rcrtc->rstc);
+	}
+
+	rcrtc->rzg2l_clocks.aclk = devm_clk_get(rcdu->dev, "aclk");
+	if (IS_ERR(rcrtc->rzg2l_clocks.aclk)) {
+		dev_err(rcdu->dev, "no axi clock for DU\n");
+		return PTR_ERR(rcrtc->rzg2l_clocks.aclk);
+	}
+
+	rcrtc->rzg2l_clocks.pclk = devm_clk_get(rcdu->dev, "pclk");
+	if (IS_ERR(rcrtc->rzg2l_clocks.pclk)) {
+		dev_err(rcdu->dev, "no peripheral clock for DU\n");
+		return PTR_ERR(rcrtc->rzg2l_clocks.pclk);
+	}
+
+	rcrtc->rzg2l_clocks.dclk = devm_clk_get(rcdu->dev, "vclk");
+	if (IS_ERR(rcrtc->rzg2l_clocks.dclk)) {
+		dev_err(rcdu->dev, "no video clock for DU\n");
+		return PTR_ERR(rcrtc->rzg2l_clocks.dclk);
+	}
+
+	init_waitqueue_head(&rcrtc->flip_wait);
+	rcrtc->dev = rcdu;
+
+	primary = &rcrtc->vsp->planes[rcrtc->vsp_pipe].plane;
+
+	ret = drm_crtc_init_with_planes(&rcdu->ddev, crtc, primary, NULL,
+					&crtc_funcs_rz, NULL);
+	if (ret < 0)
+		return ret;
+
+	drm_crtc_helper_add(crtc, &crtc_helper_funcs);
+
+	return 0;
+}
diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.h b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.h
new file mode 100644
index 000000000000..cbba38acc377
--- /dev/null
+++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.h
@@ -0,0 +1,89 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * RZ/G2L Display Unit CRTCs
+ *
+ * Copyright (C) 2023 Renesas Electronics Corporation
+ *
+ * Based on rcar_du_crtc.h
+ */
+
+#ifndef __RZG2L_DU_CRTC_H__
+#define __RZG2L_DU_CRTC_H__
+
+#include <linux/container_of.h>
+#include <linux/mutex.h>
+#include <linux/spinlock.h>
+#include <linux/wait.h>
+
+#include <drm/drm_crtc.h>
+#include <drm/drm_writeback.h>
+
+#include <media/vsp1.h>
+
+struct clk;
+struct reset_control;
+struct rzg2l_du_vsp;
+struct rzg2l_du_format_info;
+
+/**
+ * struct rzg2l_du_crtc - the CRTC, representing a DU superposition processor
+ * @crtc: base DRM CRTC
+ * @dev: the DU device
+ * @initialized: whether the CRTC has been initialized and clocks enabled
+ * @vblank_enable: whether vblank events are enabled on this CRTC
+ * @event: event to post when the pending page flip completes
+ * @flip_wait: wait queue used to signal page flip completion
+ * @vsp: VSP feeding video to this CRTC
+ * @vsp_pipe: index of the VSP pipeline feeding video to this CRTC
+ * @rstc: reset controller
+ * @rzg2l_clocks: the bus, main and video clock
+ */
+struct rzg2l_du_crtc {
+	struct drm_crtc crtc;
+
+	struct rzg2l_du_device *dev;
+	bool initialized;
+
+	bool vblank_enable;
+	struct drm_pending_vblank_event *event;
+	wait_queue_head_t flip_wait;
+
+	struct rzg2l_du_vsp *vsp;
+	unsigned int vsp_pipe;
+
+	const char *const *sources;
+	unsigned int sources_count;
+
+	struct reset_control *rstc;
+	struct {
+		struct clk *aclk;
+		struct clk *pclk;
+		struct clk *dclk;
+	} rzg2l_clocks;
+};
+
+static inline struct rzg2l_du_crtc *to_rzg2l_crtc(struct drm_crtc *c)
+{
+	return container_of(c, struct rzg2l_du_crtc, crtc);
+}
+
+/**
+ * struct rzg2l_du_crtc_state - Driver-specific CRTC state
+ * @state: base DRM CRTC state
+ * @outputs: bitmask of the outputs (enum rzg2l_du_output) driven by this CRTC
+ */
+struct rzg2l_du_crtc_state {
+	struct drm_crtc_state state;
+	unsigned int outputs;
+};
+
+static inline struct rzg2l_du_crtc_state *to_rzg2l_crtc_state(struct drm_crtc_state *s)
+{
+	return container_of(s, struct rzg2l_du_crtc_state, state);
+}
+
+int rzg2l_du_crtc_create(struct rzg2l_du_device *rcdu);
+
+void rzg2l_du_crtc_finish_page_flip(struct rzg2l_du_crtc *rcrtc);
+
+#endif /* __RZG2L_DU_CRTC_H__ */
diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c
new file mode 100644
index 000000000000..2f3ced999c4f
--- /dev/null
+++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c
@@ -0,0 +1,176 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * RZ/G2L Display Unit DRM driver
+ *
+ * Copyright (C) 2023 Renesas Electronics Corporation
+ *
+ * Based on rcar_du_drv.c
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_drv.h>
+#include <drm/drm_fbdev_generic.h>
+#include <drm/drm_gem_dma_helper.h>
+#include <drm/drm_probe_helper.h>
+
+#include "rzg2l_du_drv.h"
+#include "rzg2l_du_kms.h"
+
+/* -----------------------------------------------------------------------------
+ * Device Information
+ */
+
+static const struct rzg2l_du_device_info rzg2l_du_r9a07g044_info = {
+	.channels_mask = BIT(0),
+	.routes = {
+		[RZG2L_DU_OUTPUT_DSI0] = {
+			.possible_outputs = BIT(0),
+			.port = 0,
+		},
+		[RZG2L_DU_OUTPUT_DPAD0] = {
+			.possible_outputs = BIT(0),
+			.port = 1,
+		}
+	}
+};
+
+static const struct of_device_id rzg2l_du_of_table[] = {
+	{ .compatible = "renesas,r9a07g044-du", .data = &rzg2l_du_r9a07g044_info },
+	{ /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, rzg2l_du_of_table);
+
+const char *rzg2l_du_output_name(enum rzg2l_du_output output)
+{
+	static const char * const names[] = {
+		[RZG2L_DU_OUTPUT_DSI0] = "DSI0",
+		[RZG2L_DU_OUTPUT_DPAD0] = "DPAD0"
+	};
+
+	if (output >= ARRAY_SIZE(names))
+		return "UNKNOWN";
+
+	return names[output];
+}
+
+/* -----------------------------------------------------------------------------
+ * DRM operations
+ */
+
+DEFINE_DRM_GEM_DMA_FOPS(rzg2l_du_fops);
+
+static const struct drm_driver rzg2l_du_driver = {
+	.driver_features	= DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC,
+	.dumb_create		= rzg2l_du_dumb_create,
+	.gem_prime_import_sg_table = rzg2l_du_gem_prime_import_sg_table,
+	.fops			= &rzg2l_du_fops,
+	.name			= "rzg2l-du",
+	.desc			= "Renesas RZ/G2L Display Unit",
+	.date			= "20230410",
+	.major			= 1,
+	.minor			= 0,
+};
+
+/* -----------------------------------------------------------------------------
+ * Platform driver
+ */
+
+static void rzg2l_du_remove(struct platform_device *pdev)
+{
+	struct rzg2l_du_device *rcdu = platform_get_drvdata(pdev);
+	struct drm_device *ddev = &rcdu->ddev;
+
+	drm_dev_unregister(ddev);
+	drm_atomic_helper_shutdown(ddev);
+
+	drm_kms_helper_poll_fini(ddev);
+}
+
+static void rzg2l_du_shutdown(struct platform_device *pdev)
+{
+	struct rzg2l_du_device *rcdu = platform_get_drvdata(pdev);
+
+	drm_atomic_helper_shutdown(&rcdu->ddev);
+}
+
+static int rzg2l_du_probe(struct platform_device *pdev)
+{
+	struct rzg2l_du_device *rcdu;
+	int ret;
+
+	if (drm_firmware_drivers_only())
+		return -ENODEV;
+
+	/* Allocate and initialize the RZ/G2L device structure. */
+	rcdu = devm_drm_dev_alloc(&pdev->dev, &rzg2l_du_driver,
+				  struct rzg2l_du_device, ddev);
+	if (IS_ERR(rcdu))
+		return PTR_ERR(rcdu);
+
+	rcdu->dev = &pdev->dev;
+	rcdu->info = of_device_get_match_data(rcdu->dev);
+
+	platform_set_drvdata(pdev, rcdu);
+
+	/* I/O resources */
+	rcdu->mmio = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(rcdu->mmio))
+		return PTR_ERR(rcdu->mmio);
+
+	ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+	if (ret)
+		return ret;
+
+	/* DRM/KMS objects */
+	ret = rzg2l_du_modeset_init(rcdu);
+	if (ret < 0) {
+		/*
+		 * Don't use dev_err_probe(), as it would overwrite the probe
+		 * deferral reason recorded in rzg2l_du_modeset_init().
+		 */
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev,
+				"failed to initialize DRM/KMS (%d)\n", ret);
+		goto error;
+	}
+
+	/*
+	 * Register the DRM device with the core and the connectors with
+	 * sysfs.
+	 */
+	ret = drm_dev_register(&rcdu->ddev, 0);
+	if (ret)
+		goto error;
+
+	drm_info(&rcdu->ddev, "Device %s probed\n", dev_name(&pdev->dev));
+
+	drm_fbdev_generic_setup(&rcdu->ddev, 32);
+
+	return 0;
+
+error:
+	drm_kms_helper_poll_fini(&rcdu->ddev);
+	return ret;
+}
+
+static struct platform_driver rzg2l_du_platform_driver = {
+	.probe		= rzg2l_du_probe,
+	.remove_new	= rzg2l_du_remove,
+	.shutdown	= rzg2l_du_shutdown,
+	.driver		= {
+		.name	= "rzg2l-du",
+		.of_match_table = rzg2l_du_of_table,
+	},
+};
+
+module_platform_driver(rzg2l_du_platform_driver);
+
+MODULE_AUTHOR("Biju Das <biju.das.jz@bp.renesas.com>");
+MODULE_DESCRIPTION("Renesas RZ/G2L Display Unit DRM Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h
new file mode 100644
index 000000000000..58806c2a8f2b
--- /dev/null
+++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h
@@ -0,0 +1,78 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * RZ/G2L Display Unit DRM driver
+ *
+ * Copyright (C) 2023 Renesas Electronics Corporation
+ *
+ * Based on rcar_du_drv.h
+ */
+
+#ifndef __RZG2L_DU_DRV_H__
+#define __RZG2L_DU_DRV_H__
+
+#include <linux/kernel.h>
+
+#include <drm/drm_device.h>
+
+#include "rzg2l_du_crtc.h"
+#include "rzg2l_du_vsp.h"
+
+struct device;
+struct drm_property;
+
+enum rzg2l_du_output {
+	RZG2L_DU_OUTPUT_DSI0,
+	RZG2L_DU_OUTPUT_DPAD0,
+	RZG2L_DU_OUTPUT_MAX,
+};
+
+/*
+ * struct rzg2l_du_output_routing - Output routing specification
+ * @possible_outputs: bitmask of possible outputs
+ * @port: device tree port number corresponding to this output route
+ *
+ * The DU has 2 possible outputs (DPAD0, DSI0). Output routing data
+ * specify the valid SoC outputs, which CRTC can drive the output, and the type
+ * of in-SoC encoder for the output.
+ */
+struct rzg2l_du_output_routing {
+	unsigned int possible_outputs;
+	unsigned int port;
+};
+
+/*
+ * struct rzg2l_du_device_info - DU model-specific information
+ * @channels_mask: bit mask of available DU channels
+ * @routes: array of CRTC to output routes, indexed by output (RZG2L_DU_OUTPUT_*)
+ */
+struct rzg2l_du_device_info {
+	unsigned int channels_mask;
+	struct rzg2l_du_output_routing routes[RZG2L_DU_OUTPUT_MAX];
+};
+
+#define RZG2L_DU_MAX_CRTCS		1
+#define RZG2L_DU_MAX_VSPS		1
+#define RZG2L_DU_MAX_DSI		1
+
+struct rzg2l_du_device {
+	struct device *dev;
+	const struct rzg2l_du_device_info *info;
+
+	void __iomem *mmio;
+
+	struct drm_device ddev;
+
+	struct rzg2l_du_crtc crtcs[RZG2L_DU_MAX_CRTCS];
+	unsigned int num_crtcs;
+
+	struct rzg2l_du_vsp vsps[RZG2L_DU_MAX_VSPS];
+};
+
+static inline struct rzg2l_du_device *to_rzg2l_du_device(struct drm_device *dev)
+{
+	return container_of(dev, struct rzg2l_du_device, ddev);
+}
+
+const char *rzg2l_du_output_name(enum rzg2l_du_output output);
+
+#endif /* __RZG2L_DU_DRV_H__ */
diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.c b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.c
new file mode 100644
index 000000000000..339cbaaea0b5
--- /dev/null
+++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.c
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * RZ/G2L Display Unit Encoder
+ *
+ * Copyright (C) 2023 Renesas Electronics Corporation
+ *
+ * Based on rcar_du_encoder.c
+ */
+
+#include <linux/export.h>
+#include <linux/of.h>
+
+#include <drm/drm_bridge.h>
+#include <drm/drm_bridge_connector.h>
+#include <drm/drm_panel.h>
+
+#include "rzg2l_du_drv.h"
+#include "rzg2l_du_encoder.h"
+
+/* -----------------------------------------------------------------------------
+ * Encoder
+ */
+
+static const struct drm_encoder_funcs rzg2l_du_encoder_funcs = {
+};
+
+int rzg2l_du_encoder_init(struct rzg2l_du_device  *rcdu,
+			  enum rzg2l_du_output output,
+			  struct device_node *enc_node)
+{
+	struct rzg2l_du_encoder *renc;
+	struct drm_connector *connector;
+	struct drm_bridge *bridge;
+	int ret;
+
+	/* Locate the DRM bridge from the DT node. */
+	bridge = of_drm_find_bridge(enc_node);
+	if (!bridge)
+		return -EPROBE_DEFER;
+
+	dev_dbg(rcdu->dev, "initializing encoder %pOF for output %s\n",
+		enc_node, rzg2l_du_output_name(output));
+
+	renc = drmm_encoder_alloc(&rcdu->ddev, struct rzg2l_du_encoder, base,
+				  &rzg2l_du_encoder_funcs, DRM_MODE_ENCODER_NONE,
+				  NULL);
+	if (IS_ERR(renc))
+		return PTR_ERR(renc);
+
+	renc->output = output;
+
+	/* Attach the bridge to the encoder. */
+	ret = drm_bridge_attach(&renc->base, bridge, NULL,
+				DRM_BRIDGE_ATTACH_NO_CONNECTOR);
+	if (ret) {
+		dev_err(rcdu->dev,
+			"failed to attach bridge %pOF for output %s (%d)\n",
+			bridge->of_node, rzg2l_du_output_name(output), ret);
+		return ret;
+	}
+
+	/* Create the connector for the chain of bridges. */
+	connector = drm_bridge_connector_init(&rcdu->ddev, &renc->base);
+	if (IS_ERR(connector)) {
+		dev_err(rcdu->dev,
+			"failed to created connector for output %s (%ld)\n",
+			rzg2l_du_output_name(output), PTR_ERR(connector));
+		return PTR_ERR(connector);
+	}
+
+	return drm_connector_attach_encoder(connector, &renc->base);
+}
diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.h b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.h
new file mode 100644
index 000000000000..3e430c1f6132
--- /dev/null
+++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.h
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * RZ/G2L Display Unit Encoder
+ *
+ * Copyright (C) 2023 Renesas Electronics Corporation
+ *
+ * Based on rcar_du_encoder.h
+ */
+
+#ifndef __RZG2L_DU_ENCODER_H__
+#define __RZG2L_DU_ENCODER_H__
+
+#include <drm/drm_encoder.h>
+#include <linux/container_of.h>
+
+struct rzg2l_du_device;
+
+struct rzg2l_du_encoder {
+	struct drm_encoder base;
+	enum rzg2l_du_output output;
+};
+
+static inline struct rzg2l_du_encoder *to_rzg2l_encoder(struct drm_encoder *e)
+{
+	return container_of(e, struct rzg2l_du_encoder, base);
+}
+
+int rzg2l_du_encoder_init(struct rzg2l_du_device *rcdu,
+			  enum rzg2l_du_output output,
+			  struct device_node *enc_node);
+
+#endif /* __RZG2L_DU_ENCODER_H__ */
diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.c b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.c
new file mode 100644
index 000000000000..9e4fa36d1dd0
--- /dev/null
+++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.c
@@ -0,0 +1,441 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * RZ/G2L Display Unit Mode Setting
+ *
+ * Copyright (C) 2023 Renesas Electronics Corporation
+ *
+ * Based on rcar_du_kms.c
+ */
+
+#include <drm/drm_atomic.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_device.h>
+#include <drm/drm_framebuffer.h>
+#include <drm/drm_gem_dma_helper.h>
+#include <drm/drm_gem_framebuffer_helper.h>
+#include <drm/drm_managed.h>
+#include <drm/drm_probe_helper.h>
+#include <drm/drm_vblank.h>
+
+#include <linux/device.h>
+#include <linux/of.h>
+#include <linux/of_graph.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+
+#include "rzg2l_du_crtc.h"
+#include "rzg2l_du_drv.h"
+#include "rzg2l_du_encoder.h"
+#include "rzg2l_du_kms.h"
+#include "rzg2l_du_vsp.h"
+
+/* -----------------------------------------------------------------------------
+ * Format helpers
+ */
+
+static const struct rzg2l_du_format_info rzg2l_du_format_infos[] = {
+	{
+		.fourcc = DRM_FORMAT_XRGB8888,
+		.v4l2 = V4L2_PIX_FMT_XBGR32,
+		.bpp = 32,
+		.planes = 1,
+		.hsub = 1,
+	}, {
+		.fourcc = DRM_FORMAT_ARGB8888,
+		.v4l2 = V4L2_PIX_FMT_ABGR32,
+		.bpp = 32,
+		.planes = 1,
+		.hsub = 1,
+	}, {
+		.fourcc = DRM_FORMAT_RGB888,
+		.v4l2 = V4L2_PIX_FMT_BGR24,
+		.bpp = 24,
+		.planes = 1,
+		.hsub = 1,
+	}
+};
+
+const struct rzg2l_du_format_info *rzg2l_du_format_info(u32 fourcc)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(rzg2l_du_format_infos); ++i) {
+		if (rzg2l_du_format_infos[i].fourcc == fourcc)
+			return &rzg2l_du_format_infos[i];
+	}
+
+	return NULL;
+}
+
+/* -----------------------------------------------------------------------------
+ * Frame buffer
+ */
+
+static const struct drm_gem_object_funcs rzg2l_du_gem_funcs = {
+	.free = drm_gem_dma_object_free,
+	.print_info = drm_gem_dma_object_print_info,
+	.get_sg_table = drm_gem_dma_object_get_sg_table,
+	.vmap = drm_gem_dma_object_vmap,
+	.mmap = drm_gem_dma_object_mmap,
+	.vm_ops = &drm_gem_dma_vm_ops,
+};
+
+struct drm_gem_object *
+rzg2l_du_gem_prime_import_sg_table(struct drm_device *dev,
+				   struct dma_buf_attachment *attach,
+				   struct sg_table *sgt)
+{
+	struct drm_gem_dma_object *dma_obj;
+	struct drm_gem_object *gem_obj;
+	int ret;
+
+	/* Create a DMA GEM buffer. */
+	dma_obj = kzalloc(sizeof(*dma_obj), GFP_KERNEL);
+	if (!dma_obj)
+		return ERR_PTR(-ENOMEM);
+
+	gem_obj = &dma_obj->base;
+	gem_obj->funcs = &rzg2l_du_gem_funcs;
+
+	drm_gem_private_object_init(dev, gem_obj, attach->dmabuf->size);
+	dma_obj->map_noncoherent = false;
+
+	ret = drm_gem_create_mmap_offset(gem_obj);
+	if (ret) {
+		drm_gem_object_release(gem_obj);
+		kfree(dma_obj);
+		return ERR_PTR(ret);
+	}
+
+	dma_obj->dma_addr = 0;
+	dma_obj->sgt = sgt;
+
+	return gem_obj;
+}
+
+int rzg2l_du_dumb_create(struct drm_file *file, struct drm_device *dev,
+			 struct drm_mode_create_dumb *args)
+{
+	unsigned int min_pitch = DIV_ROUND_UP(args->width * args->bpp, 8);
+	unsigned int align = 16 * args->bpp / 8;
+
+	args->pitch = roundup(min_pitch, align);
+
+	return drm_gem_dma_dumb_create_internal(file, dev, args);
+}
+
+static struct drm_framebuffer *
+rzg2l_du_fb_create(struct drm_device *dev, struct drm_file *file_priv,
+		   const struct drm_mode_fb_cmd2 *mode_cmd)
+{
+	const struct rzg2l_du_format_info *format;
+	unsigned int max_pitch;
+
+	format = rzg2l_du_format_info(mode_cmd->pixel_format);
+	if (!format) {
+		dev_dbg(dev->dev, "unsupported pixel format %p4cc\n",
+			&mode_cmd->pixel_format);
+		return ERR_PTR(-EINVAL);
+	}
+
+	/*
+	 * On RZ/G2L the memory interface is handled by the VSP that limits the
+	 * pitch to 65535 bytes.
+	 */
+	max_pitch = 65535;
+	if (mode_cmd->pitches[0] > max_pitch) {
+		dev_dbg(dev->dev, "invalid pitch value %u\n",
+			mode_cmd->pitches[0]);
+		return ERR_PTR(-EINVAL);
+	}
+
+	return drm_gem_fb_create(dev, file_priv, mode_cmd);
+}
+
+/* -----------------------------------------------------------------------------
+ * Atomic Check and Update
+ */
+
+static void rzg2l_du_atomic_commit_tail(struct drm_atomic_state *old_state)
+{
+	struct drm_device *dev = old_state->dev;
+
+	/* Apply the atomic update. */
+	drm_atomic_helper_commit_modeset_disables(dev, old_state);
+	drm_atomic_helper_commit_planes(dev, old_state,
+					DRM_PLANE_COMMIT_ACTIVE_ONLY);
+	drm_atomic_helper_commit_modeset_enables(dev, old_state);
+
+	drm_atomic_helper_commit_hw_done(old_state);
+	drm_atomic_helper_wait_for_flip_done(dev, old_state);
+
+	drm_atomic_helper_cleanup_planes(dev, old_state);
+}
+
+/* -----------------------------------------------------------------------------
+ * Initialization
+ */
+
+static const struct drm_mode_config_helper_funcs rzg2l_du_mode_config_helper = {
+	.atomic_commit_tail = rzg2l_du_atomic_commit_tail,
+};
+
+static const struct drm_mode_config_funcs rzg2l_du_mode_config_funcs = {
+	.fb_create = rzg2l_du_fb_create,
+	.atomic_check = drm_atomic_helper_check,
+	.atomic_commit = drm_atomic_helper_commit,
+};
+
+static int rzg2l_du_encoders_init_one(struct rzg2l_du_device *rcdu,
+				      enum rzg2l_du_output output,
+				      struct of_endpoint *ep)
+{
+	struct device_node *entity;
+	int ret;
+
+	/* Locate the connected entity and initialize the encoder. */
+	entity = of_graph_get_remote_port_parent(ep->local_node);
+	if (!entity) {
+		dev_dbg(rcdu->dev, "unconnected endpoint %pOF, skipping\n",
+			ep->local_node);
+		return -ENODEV;
+	}
+
+	if (!of_device_is_available(entity)) {
+		dev_dbg(rcdu->dev,
+			"connected entity %pOF is disabled, skipping\n",
+			entity);
+		of_node_put(entity);
+		return -ENODEV;
+	}
+
+	ret = rzg2l_du_encoder_init(rcdu, output, entity);
+	if (ret && ret != -EPROBE_DEFER && ret != -ENOLINK)
+		dev_warn(rcdu->dev,
+			 "failed to initialize encoder %pOF on output %s (%d), skipping\n",
+			 entity, rzg2l_du_output_name(output), ret);
+
+	of_node_put(entity);
+
+	return ret;
+}
+
+static int rzg2l_du_encoders_init(struct rzg2l_du_device *rcdu)
+{
+	struct device_node *np = rcdu->dev->of_node;
+	struct device_node *ep_node;
+	unsigned int num_encoders = 0;
+
+	/*
+	 * Iterate over the endpoints and create one encoder for each output
+	 * pipeline.
+	 */
+	for_each_endpoint_of_node(np, ep_node) {
+		enum rzg2l_du_output output;
+		struct of_endpoint ep;
+		unsigned int i;
+		int ret;
+
+		ret = of_graph_parse_endpoint(ep_node, &ep);
+		if (ret < 0) {
+			of_node_put(ep_node);
+			return ret;
+		}
+
+		/* Find the output route corresponding to the port number. */
+		for (i = 0; i < RZG2L_DU_OUTPUT_MAX; ++i) {
+			if (rcdu->info->routes[i].port == ep.port) {
+				output = i;
+				break;
+			}
+		}
+
+		if (i == RZG2L_DU_OUTPUT_MAX) {
+			dev_warn(rcdu->dev,
+				 "port %u references unexisting output, skipping\n",
+				 ep.port);
+			continue;
+		}
+
+		/* Process the output pipeline. */
+		ret = rzg2l_du_encoders_init_one(rcdu, output, &ep);
+		if (ret < 0) {
+			if (ret == -EPROBE_DEFER) {
+				of_node_put(ep_node);
+				return ret;
+			}
+
+			continue;
+		}
+
+		num_encoders++;
+	}
+
+	return num_encoders;
+}
+
+static int rzg2l_du_vsps_init(struct rzg2l_du_device *rcdu)
+{
+	const struct device_node *np = rcdu->dev->of_node;
+	const char *vsps_prop_name = "renesas,vsps";
+	struct of_phandle_args args;
+	struct {
+		struct device_node *np;
+		unsigned int crtcs_mask;
+	} vsps[RZG2L_DU_MAX_VSPS] = { { NULL, }, };
+	unsigned int vsps_count = 0;
+	unsigned int cells;
+	unsigned int i;
+	int ret;
+
+	/*
+	 * First parse the DT vsps property to populate the list of VSPs. Each
+	 * entry contains a pointer to the VSP DT node and a bitmask of the
+	 * connected DU CRTCs.
+	 */
+	ret = of_property_count_u32_elems(np, vsps_prop_name);
+	if (ret < 0) {
+		/* Backward compatibility with old DTBs. */
+		vsps_prop_name = "vsps";
+		ret = of_property_count_u32_elems(np, vsps_prop_name);
+	}
+	cells = ret / rcdu->num_crtcs - 1;
+	if (cells > 1)
+		return -EINVAL;
+
+	for (i = 0; i < rcdu->num_crtcs; ++i) {
+		unsigned int j;
+
+		ret = of_parse_phandle_with_fixed_args(np, vsps_prop_name,
+						       cells, i, &args);
+		if (ret < 0)
+			goto error;
+
+		/*
+		 * Add the VSP to the list or update the corresponding existing
+		 * entry if the VSP has already been added.
+		 */
+		for (j = 0; j < vsps_count; ++j) {
+			if (vsps[j].np == args.np)
+				break;
+		}
+
+		if (j < vsps_count)
+			of_node_put(args.np);
+		else
+			vsps[vsps_count++].np = args.np;
+
+		vsps[j].crtcs_mask |= BIT(i);
+
+		/*
+		 * Store the VSP pointer and pipe index in the CRTC. If the
+		 * second cell of the 'renesas,vsps' specifier isn't present,
+		 * default to 0 to remain compatible with older DT bindings.
+		 */
+		rcdu->crtcs[i].vsp = &rcdu->vsps[j];
+		rcdu->crtcs[i].vsp_pipe = cells >= 1 ? args.args[0] : 0;
+	}
+
+	/*
+	 * Then initialize all the VSPs from the node pointers and CRTCs bitmask
+	 * computed previously.
+	 */
+	for (i = 0; i < vsps_count; ++i) {
+		struct rzg2l_du_vsp *vsp = &rcdu->vsps[i];
+
+		vsp->index = i;
+		vsp->dev = rcdu;
+
+		ret = rzg2l_du_vsp_init(vsp, vsps[i].np, vsps[i].crtcs_mask);
+		if (ret < 0)
+			goto error;
+	}
+
+	return 0;
+
+error:
+	for (i = 0; i < ARRAY_SIZE(vsps); ++i)
+		of_node_put(vsps[i].np);
+
+	return ret;
+}
+
+int rzg2l_du_modeset_init(struct rzg2l_du_device *rcdu)
+{
+	struct drm_device *dev = &rcdu->ddev;
+	struct drm_encoder *encoder;
+	unsigned int num_encoders;
+	int ret;
+
+	ret = drmm_mode_config_init(dev);
+	if (ret)
+		return ret;
+
+	dev->mode_config.min_width = 0;
+	dev->mode_config.min_height = 0;
+	dev->mode_config.normalize_zpos = true;
+	dev->mode_config.funcs = &rzg2l_du_mode_config_funcs;
+	dev->mode_config.helper_private = &rzg2l_du_mode_config_helper;
+
+	/*
+	 * The RZ DU uses the VSP1 for memory access, and is limited
+	 * to frame sizes of 1920x1080.
+	 */
+	dev->mode_config.max_width = 1920;
+	dev->mode_config.max_height = 1080;
+
+	rcdu->num_crtcs = hweight8(rcdu->info->channels_mask);
+
+	/*
+	 * Initialize vertical blanking interrupts handling. Start with vblank
+	 * disabled for all CRTCs.
+	 */
+	ret = drm_vblank_init(dev, rcdu->num_crtcs);
+	if (ret < 0)
+		return ret;
+
+	/* Initialize the compositors. */
+	ret = rzg2l_du_vsps_init(rcdu);
+	if (ret < 0)
+		return ret;
+
+	/* Create the CRTCs. */
+	ret = rzg2l_du_crtc_create(rcdu);
+	if (ret < 0)
+		return ret;
+
+	/* Initialize the encoders. */
+	ret = rzg2l_du_encoders_init(rcdu);
+	if (ret < 0) {
+		dev_err_probe(rcdu->dev, ret, "failed to initialize encoders\n");
+		return ret;
+	}
+
+	if (ret == 0) {
+		dev_err(rcdu->dev, "error: no encoder could be initialized\n");
+		return -EINVAL;
+	}
+
+	num_encoders = ret;
+
+	/*
+	 * Set the possible CRTCs and possible clones. There's always at least
+	 * one way for all encoders to clone each other, set all bits in the
+	 * possible clones field.
+	 */
+	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+		struct rzg2l_du_encoder *renc = to_rzg2l_encoder(encoder);
+		const struct rzg2l_du_output_routing *route =
+			&rcdu->info->routes[renc->output];
+
+		encoder->possible_crtcs = route->possible_outputs;
+		encoder->possible_clones = (1 << num_encoders) - 1;
+	}
+
+	drm_mode_config_reset(dev);
+
+	drm_kms_helper_poll_init(dev);
+
+	return 0;
+}
diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.h b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.h
new file mode 100644
index 000000000000..876e97cfbf45
--- /dev/null
+++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.h
@@ -0,0 +1,43 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * RZ/G2L Display Unit Mode Setting
+ *
+ * Copyright (C) 2023 Renesas Electronics Corporation
+ *
+ * Based on rcar_du_kms.h
+ */
+
+#ifndef __RZG2L_DU_KMS_H__
+#define __RZG2L_DU_KMS_H__
+
+#include <linux/types.h>
+
+struct dma_buf_attachment;
+struct drm_file;
+struct drm_device;
+struct drm_gem_object;
+struct drm_mode_create_dumb;
+struct rzg2l_du_device;
+struct sg_table;
+
+struct rzg2l_du_format_info {
+	u32 fourcc;
+	u32 v4l2;
+	unsigned int bpp;
+	unsigned int planes;
+	unsigned int hsub;
+};
+
+const struct rzg2l_du_format_info *rzg2l_du_format_info(u32 fourcc);
+
+int rzg2l_du_modeset_init(struct rzg2l_du_device *rcdu);
+
+int rzg2l_du_dumb_create(struct drm_file *file, struct drm_device *dev,
+			 struct drm_mode_create_dumb *args);
+
+struct drm_gem_object *
+rzg2l_du_gem_prime_import_sg_table(struct drm_device *dev,
+				   struct dma_buf_attachment *attach,
+				   struct sg_table *sgt);
+
+#endif /* __RZG2L_DU_KMS_H__ */
diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.c b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.c
new file mode 100644
index 000000000000..767636daa23c
--- /dev/null
+++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.c
@@ -0,0 +1,469 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * RZ/G2L Display Unit VSP-Based Compositor
+ *
+ * Copyright (C) 2023 Renesas Electronics Corporation
+ *
+ * Based on rcar_du_vsp.c
+ */
+
+#include <drm/drm_atomic.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_blend.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_fb_dma_helper.h>
+#include <drm/drm_fourcc.h>
+#include <drm/drm_framebuffer.h>
+#include <drm/drm_gem_atomic_helper.h>
+#include <drm/drm_gem_dma_helper.h>
+#include <drm/drm_managed.h>
+#include <drm/drm_vblank.h>
+
+#include <linux/bitops.h>
+#include <linux/dma-mapping.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/scatterlist.h>
+
+#include <media/vsp1.h>
+
+#include "rzg2l_du_drv.h"
+#include "rzg2l_du_kms.h"
+#include "rzg2l_du_vsp.h"
+
+static void rzg2l_du_vsp_complete(void *private, unsigned int status, u32 crc)
+{
+	struct rzg2l_du_crtc *crtc = private;
+
+	if (crtc->vblank_enable)
+		drm_crtc_handle_vblank(&crtc->crtc);
+
+	if (status & VSP1_DU_STATUS_COMPLETE)
+		rzg2l_du_crtc_finish_page_flip(crtc);
+
+	drm_crtc_add_crc_entry(&crtc->crtc, false, 0, &crc);
+}
+
+void rzg2l_du_vsp_enable(struct rzg2l_du_crtc *crtc)
+{
+	const struct drm_display_mode *mode = &crtc->crtc.state->adjusted_mode;
+	struct vsp1_du_lif_config cfg = {
+		.width = mode->hdisplay,
+		.height = mode->vdisplay,
+		.interlaced = mode->flags & DRM_MODE_FLAG_INTERLACE,
+		.callback = rzg2l_du_vsp_complete,
+		.callback_data = crtc,
+	};
+
+	vsp1_du_setup_lif(crtc->vsp->vsp, crtc->vsp_pipe, &cfg);
+}
+
+void rzg2l_du_vsp_disable(struct rzg2l_du_crtc *crtc)
+{
+	vsp1_du_setup_lif(crtc->vsp->vsp, crtc->vsp_pipe, NULL);
+}
+
+void rzg2l_du_vsp_atomic_begin(struct rzg2l_du_crtc *crtc)
+{
+	vsp1_du_atomic_begin(crtc->vsp->vsp, crtc->vsp_pipe);
+}
+
+void rzg2l_du_vsp_atomic_flush(struct rzg2l_du_crtc *crtc)
+{
+	struct vsp1_du_atomic_pipe_config cfg = { { 0, } };
+	struct rzg2l_du_crtc_state *state;
+
+	state = to_rzg2l_crtc_state(crtc->crtc.state);
+
+	vsp1_du_atomic_flush(crtc->vsp->vsp, crtc->vsp_pipe, &cfg);
+}
+
+static const u32 rzg2l_du_vsp_formats[] = {
+	DRM_FORMAT_RGB332,
+	DRM_FORMAT_ARGB4444,
+	DRM_FORMAT_XRGB4444,
+	DRM_FORMAT_ARGB1555,
+	DRM_FORMAT_XRGB1555,
+	DRM_FORMAT_RGB565,
+	DRM_FORMAT_BGR888,
+	DRM_FORMAT_RGB888,
+	DRM_FORMAT_BGRA8888,
+	DRM_FORMAT_BGRX8888,
+	DRM_FORMAT_ARGB8888,
+	DRM_FORMAT_XRGB8888,
+	DRM_FORMAT_UYVY,
+	DRM_FORMAT_YUYV,
+	DRM_FORMAT_YVYU,
+	DRM_FORMAT_NV12,
+	DRM_FORMAT_NV21,
+	DRM_FORMAT_NV16,
+	DRM_FORMAT_NV61,
+	DRM_FORMAT_YUV420,
+	DRM_FORMAT_YVU420,
+	DRM_FORMAT_YUV422,
+	DRM_FORMAT_YVU422,
+	DRM_FORMAT_YUV444,
+	DRM_FORMAT_YVU444,
+};
+
+static void rzg2l_du_vsp_plane_setup(struct rzg2l_du_vsp_plane *plane)
+{
+	struct rzg2l_du_vsp_plane_state *state =
+		to_rzg2l_vsp_plane_state(plane->plane.state);
+	struct rzg2l_du_crtc *crtc = to_rzg2l_crtc(state->state.crtc);
+	struct drm_framebuffer *fb = plane->plane.state->fb;
+	const struct rzg2l_du_format_info *format;
+	struct vsp1_du_atomic_config cfg = {
+		.pixelformat = 0,
+		.pitch = fb->pitches[0],
+		.alpha = state->state.alpha >> 8,
+		.zpos = state->state.zpos,
+	};
+	u32 fourcc = state->format->fourcc;
+	unsigned int i;
+
+	cfg.src.left = state->state.src.x1 >> 16;
+	cfg.src.top = state->state.src.y1 >> 16;
+	cfg.src.width = drm_rect_width(&state->state.src) >> 16;
+	cfg.src.height = drm_rect_height(&state->state.src) >> 16;
+
+	cfg.dst.left = state->state.dst.x1;
+	cfg.dst.top = state->state.dst.y1;
+	cfg.dst.width = drm_rect_width(&state->state.dst);
+	cfg.dst.height = drm_rect_height(&state->state.dst);
+
+	for (i = 0; i < state->format->planes; ++i)
+		cfg.mem[i] = sg_dma_address(state->sg_tables[i].sgl)
+			   + fb->offsets[i];
+
+	if (state->state.pixel_blend_mode == DRM_MODE_BLEND_PIXEL_NONE) {
+		switch (fourcc) {
+		case DRM_FORMAT_ARGB1555:
+			fourcc = DRM_FORMAT_XRGB1555;
+			break;
+
+		case DRM_FORMAT_ARGB4444:
+			fourcc = DRM_FORMAT_XRGB4444;
+			break;
+
+		case DRM_FORMAT_ARGB8888:
+			fourcc = DRM_FORMAT_XRGB8888;
+			break;
+		}
+	}
+
+	format = rzg2l_du_format_info(fourcc);
+	cfg.pixelformat = format->v4l2;
+
+	cfg.premult = state->state.pixel_blend_mode == DRM_MODE_BLEND_PREMULTI;
+
+	vsp1_du_atomic_update(plane->vsp->vsp, crtc->vsp_pipe,
+			      plane->index, &cfg);
+}
+
+int rzg2l_du_vsp_map_fb(struct rzg2l_du_vsp *vsp, struct drm_framebuffer *fb,
+			struct sg_table sg_tables[3])
+{
+	struct rzg2l_du_device *rcdu = vsp->dev;
+	unsigned int i, j;
+	int ret;
+
+	for (i = 0; i < fb->format->num_planes; ++i) {
+		struct drm_gem_dma_object *gem = drm_fb_dma_get_gem_obj(fb, i);
+		struct sg_table *sgt = &sg_tables[i];
+
+		if (gem->sgt) {
+			struct scatterlist *src;
+			struct scatterlist *dst;
+
+			/*
+			 * If the GEM buffer has a scatter gather table, it has
+			 * been imported from a dma-buf and has no physical
+			 * address as it might not be physically contiguous.
+			 * Copy the original scatter gather table to map it to
+			 * the VSP.
+			 */
+			ret = sg_alloc_table(sgt, gem->sgt->orig_nents,
+					     GFP_KERNEL);
+			if (ret)
+				goto fail;
+
+			src = gem->sgt->sgl;
+			dst = sgt->sgl;
+			for (j = 0; j < gem->sgt->orig_nents; ++j) {
+				sg_set_page(dst, sg_page(src), src->length,
+					    src->offset);
+				src = sg_next(src);
+				dst = sg_next(dst);
+			}
+		} else {
+			ret = dma_get_sgtable(rcdu->dev, sgt, gem->vaddr,
+					      gem->dma_addr, gem->base.size);
+			if (ret)
+				goto fail;
+		}
+
+		ret = vsp1_du_map_sg(vsp->vsp, sgt);
+		if (ret) {
+			sg_free_table(sgt);
+			goto fail;
+		}
+	}
+
+	return 0;
+
+fail:
+	while (i--) {
+		struct sg_table *sgt = &sg_tables[i];
+
+		vsp1_du_unmap_sg(vsp->vsp, sgt);
+		sg_free_table(sgt);
+	}
+
+	return ret;
+}
+
+static int rzg2l_du_vsp_plane_prepare_fb(struct drm_plane *plane,
+					 struct drm_plane_state *state)
+{
+	struct rzg2l_du_vsp_plane_state *rstate = to_rzg2l_vsp_plane_state(state);
+	struct rzg2l_du_vsp *vsp = to_rzg2l_vsp_plane(plane)->vsp;
+	int ret;
+
+	/*
+	 * There's no need to prepare (and unprepare) the framebuffer when the
+	 * plane is not visible, as it will not be displayed.
+	 */
+	if (!state->visible)
+		return 0;
+
+	ret = rzg2l_du_vsp_map_fb(vsp, state->fb, rstate->sg_tables);
+	if (ret < 0)
+		return ret;
+
+	return drm_gem_plane_helper_prepare_fb(plane, state);
+}
+
+void rzg2l_du_vsp_unmap_fb(struct rzg2l_du_vsp *vsp, struct drm_framebuffer *fb,
+			   struct sg_table sg_tables[3])
+{
+	unsigned int i;
+
+	for (i = 0; i < fb->format->num_planes; ++i) {
+		struct sg_table *sgt = &sg_tables[i];
+
+		vsp1_du_unmap_sg(vsp->vsp, sgt);
+		sg_free_table(sgt);
+	}
+}
+
+static void rzg2l_du_vsp_plane_cleanup_fb(struct drm_plane *plane,
+					  struct drm_plane_state *state)
+{
+	struct rzg2l_du_vsp_plane_state *rstate = to_rzg2l_vsp_plane_state(state);
+	struct rzg2l_du_vsp *vsp = to_rzg2l_vsp_plane(plane)->vsp;
+
+	if (!state->visible)
+		return;
+
+	rzg2l_du_vsp_unmap_fb(vsp, state->fb, rstate->sg_tables);
+}
+
+static int __rzg2l_du_vsp_plane_atomic_check(struct drm_plane *plane,
+					     struct drm_plane_state *state,
+					     const struct rzg2l_du_format_info **format)
+{
+	struct drm_crtc_state *crtc_state;
+	int ret;
+
+	if (!state->crtc) {
+		/*
+		 * The visible field is not reset by the DRM core but only
+		 * updated by drm_atomic_helper_check_plane_state, set it
+		 * manually.
+		 */
+		state->visible = false;
+		*format = NULL;
+		return 0;
+	}
+
+	crtc_state = drm_atomic_get_crtc_state(state->state, state->crtc);
+	if (IS_ERR(crtc_state))
+		return PTR_ERR(crtc_state);
+
+	ret = drm_atomic_helper_check_plane_state(state, crtc_state,
+						  DRM_PLANE_NO_SCALING,
+						  DRM_PLANE_NO_SCALING,
+						  true, true);
+	if (ret < 0)
+		return ret;
+
+	if (!state->visible) {
+		*format = NULL;
+		return 0;
+	}
+
+	*format = rzg2l_du_format_info(state->fb->format->format);
+
+	return 0;
+}
+
+static int rzg2l_du_vsp_plane_atomic_check(struct drm_plane *plane,
+					   struct drm_atomic_state *state)
+{
+	struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state,
+										 plane);
+	struct rzg2l_du_vsp_plane_state *rstate = to_rzg2l_vsp_plane_state(new_plane_state);
+
+	return __rzg2l_du_vsp_plane_atomic_check(plane, new_plane_state, &rstate->format);
+}
+
+static void rzg2l_du_vsp_plane_atomic_update(struct drm_plane *plane,
+					     struct drm_atomic_state *state)
+{
+	struct drm_plane_state *old_state = drm_atomic_get_old_plane_state(state, plane);
+	struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state, plane);
+	struct rzg2l_du_vsp_plane *rplane = to_rzg2l_vsp_plane(plane);
+	struct rzg2l_du_crtc *crtc = to_rzg2l_crtc(old_state->crtc);
+
+	if (new_state->visible)
+		rzg2l_du_vsp_plane_setup(rplane);
+	else if (old_state->crtc)
+		vsp1_du_atomic_update(rplane->vsp->vsp, crtc->vsp_pipe,
+				      rplane->index, NULL);
+}
+
+static const struct drm_plane_helper_funcs rzg2l_du_vsp_plane_helper_funcs = {
+	.prepare_fb = rzg2l_du_vsp_plane_prepare_fb,
+	.cleanup_fb = rzg2l_du_vsp_plane_cleanup_fb,
+	.atomic_check = rzg2l_du_vsp_plane_atomic_check,
+	.atomic_update = rzg2l_du_vsp_plane_atomic_update,
+};
+
+static struct drm_plane_state *
+rzg2l_du_vsp_plane_atomic_duplicate_state(struct drm_plane *plane)
+{
+	struct rzg2l_du_vsp_plane_state *copy;
+
+	if (WARN_ON(!plane->state))
+		return NULL;
+
+	copy = kzalloc(sizeof(*copy), GFP_KERNEL);
+	if (!copy)
+		return NULL;
+
+	__drm_atomic_helper_plane_duplicate_state(plane, &copy->state);
+
+	return &copy->state;
+}
+
+static void rzg2l_du_vsp_plane_atomic_destroy_state(struct drm_plane *plane,
+						    struct drm_plane_state *state)
+{
+	__drm_atomic_helper_plane_destroy_state(state);
+	kfree(to_rzg2l_vsp_plane_state(state));
+}
+
+static void rzg2l_du_vsp_plane_reset(struct drm_plane *plane)
+{
+	struct rzg2l_du_vsp_plane_state *state;
+
+	if (plane->state) {
+		rzg2l_du_vsp_plane_atomic_destroy_state(plane, plane->state);
+		plane->state = NULL;
+	}
+
+	state = kzalloc(sizeof(*state), GFP_KERNEL);
+	if (!state)
+		return;
+
+	__drm_atomic_helper_plane_reset(plane, &state->state);
+}
+
+static const struct drm_plane_funcs rzg2l_du_vsp_plane_funcs = {
+	.update_plane = drm_atomic_helper_update_plane,
+	.disable_plane = drm_atomic_helper_disable_plane,
+	.reset = rzg2l_du_vsp_plane_reset,
+	.destroy = drm_plane_cleanup,
+	.atomic_duplicate_state = rzg2l_du_vsp_plane_atomic_duplicate_state,
+	.atomic_destroy_state = rzg2l_du_vsp_plane_atomic_destroy_state,
+};
+
+static void rzg2l_du_vsp_cleanup(struct drm_device *dev, void *res)
+{
+	struct rzg2l_du_vsp *vsp = res;
+	unsigned int i;
+
+	for (i = 0; i < vsp->num_planes; ++i) {
+		struct rzg2l_du_vsp_plane *plane = &vsp->planes[i];
+
+		drm_plane_cleanup(&plane->plane);
+	}
+
+	kfree(vsp->planes);
+
+	put_device(vsp->vsp);
+}
+
+int rzg2l_du_vsp_init(struct rzg2l_du_vsp *vsp, struct device_node *np,
+		      unsigned int crtcs)
+{
+	struct rzg2l_du_device *rcdu = vsp->dev;
+	struct platform_device *pdev;
+	unsigned int num_crtcs = hweight32(crtcs);
+	unsigned int num_planes = 2;
+	unsigned int i;
+	int ret;
+
+	/* Find the VSP device and initialize it. */
+	pdev = of_find_device_by_node(np);
+	if (!pdev)
+		return -ENXIO;
+
+	vsp->vsp = &pdev->dev;
+
+	ret = drmm_add_action_or_reset(&rcdu->ddev, rzg2l_du_vsp_cleanup, vsp);
+	if (ret < 0)
+		return ret;
+
+	ret = vsp1_du_init(vsp->vsp);
+	if (ret < 0)
+		return ret;
+
+	vsp->planes = kcalloc(num_planes, sizeof(*vsp->planes), GFP_KERNEL);
+	if (!vsp->planes)
+		return -ENOMEM;
+
+	for (i = 0; i < num_planes; ++i) {
+		enum drm_plane_type type = i < num_crtcs
+					 ? DRM_PLANE_TYPE_PRIMARY
+					 : DRM_PLANE_TYPE_OVERLAY;
+		struct rzg2l_du_vsp_plane *plane = &vsp->planes[i];
+
+		plane->vsp = vsp;
+		plane->index = i;
+		ret = drm_universal_plane_init(&rcdu->ddev, &plane->plane,
+					       crtcs, &rzg2l_du_vsp_plane_funcs,
+					       rzg2l_du_vsp_formats,
+					       ARRAY_SIZE(rzg2l_du_vsp_formats),
+					       NULL, type, NULL);
+		if (ret < 0)
+			return ret;
+
+		drm_plane_helper_add(&plane->plane,
+				     &rzg2l_du_vsp_plane_helper_funcs);
+
+		drm_plane_create_alpha_property(&plane->plane);
+		drm_plane_create_zpos_property(&plane->plane, i, 0,
+					       num_planes - 1);
+
+		drm_plane_create_blend_mode_property(&plane->plane,
+					BIT(DRM_MODE_BLEND_PIXEL_NONE) |
+					BIT(DRM_MODE_BLEND_PREMULTI) |
+					BIT(DRM_MODE_BLEND_COVERAGE));
+
+		vsp->num_planes++;
+	}
+
+	return 0;
+}
diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.h b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.h
new file mode 100644
index 000000000000..d73d49a6930c
--- /dev/null
+++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.h
@@ -0,0 +1,97 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * RZ/G2L Display Unit VSP-Based Compositor
+ *
+ * Copyright (C) 2023 Renesas Electronics Corporation
+ *
+ * Based on rcar_du_vsp.h
+ */
+
+#ifndef __RZG2L_DU_VSP_H__
+#define __RZG2L_DU_VSP_H__
+
+#include <drm/drm_plane.h>
+#include <linux/container_of.h>
+#include <linux/scatterlist.h>
+
+struct device;
+struct drm_framebuffer;
+struct rzg2l_du_device;
+struct rzg2l_du_format_info;
+struct rzg2l_du_vsp;
+
+struct rzg2l_du_vsp_plane {
+	struct drm_plane plane;
+	struct rzg2l_du_vsp *vsp;
+	unsigned int index;
+};
+
+struct rzg2l_du_vsp {
+	unsigned int index;
+	struct device *vsp;
+	struct rzg2l_du_device *dev;
+	struct rzg2l_du_vsp_plane *planes;
+	unsigned int num_planes;
+};
+
+static inline struct rzg2l_du_vsp_plane *to_rzg2l_vsp_plane(struct drm_plane *p)
+{
+	return container_of(p, struct rzg2l_du_vsp_plane, plane);
+}
+
+/**
+ * struct rzg2l_du_vsp_plane_state - Driver-specific plane state
+ * @state: base DRM plane state
+ * @format: information about the pixel format used by the plane
+ * @sg_tables: scatter-gather tables for the frame buffer memory
+ */
+struct rzg2l_du_vsp_plane_state {
+	struct drm_plane_state state;
+
+	const struct rzg2l_du_format_info *format;
+	struct sg_table sg_tables[3];
+};
+
+static inline struct rzg2l_du_vsp_plane_state *
+to_rzg2l_vsp_plane_state(struct drm_plane_state *state)
+{
+	return container_of(state, struct rzg2l_du_vsp_plane_state, state);
+}
+
+#ifdef CONFIG_DRM_RCAR_VSP
+int rzg2l_du_vsp_init(struct rzg2l_du_vsp *vsp, struct device_node *np,
+		      unsigned int crtcs);
+void rzg2l_du_vsp_enable(struct rzg2l_du_crtc *crtc);
+void rzg2l_du_vsp_disable(struct rzg2l_du_crtc *crtc);
+void rzg2l_du_vsp_atomic_begin(struct rzg2l_du_crtc *crtc);
+void rzg2l_du_vsp_atomic_flush(struct rzg2l_du_crtc *crtc);
+int rzg2l_du_vsp_map_fb(struct rzg2l_du_vsp *vsp, struct drm_framebuffer *fb,
+			struct sg_table sg_tables[3]);
+void rzg2l_du_vsp_unmap_fb(struct rzg2l_du_vsp *vsp, struct drm_framebuffer *fb,
+			   struct sg_table sg_tables[3]);
+#else
+static inline int rzg2l_du_vsp_init(struct rzg2l_du_vsp *vsp, struct device_node *np,
+				    unsigned int crtcs)
+{
+	return -ENXIO;
+}
+
+static inline void rzg2l_du_vsp_enable(struct rzg2l_du_crtc *crtc) { };
+static inline void rzg2l_du_vsp_disable(struct rzg2l_du_crtc *crtc) { };
+static inline void rzg2l_du_vsp_atomic_begin(struct rzg2l_du_crtc *crtc) { };
+static inline void rzg2l_du_vsp_atomic_flush(struct rzg2l_du_crtc *crtc) { };
+static inline int rzg2l_du_vsp_map_fb(struct rzg2l_du_vsp *vsp,
+				      struct drm_framebuffer *fb,
+				      struct sg_table sg_tables[3])
+{
+	return -ENXIO;
+}
+
+static inline void rzg2l_du_vsp_unmap_fb(struct rzg2l_du_vsp *vsp,
+					 struct drm_framebuffer *fb,
+					 struct sg_table sg_tables[3])
+{
+}
+#endif
+
+#endif /* __RZG2L_DU_VSP_H__ */
-- 
2.25.1

[PATCH v11 4/4] MAINTAINERS: Add maintainer for RZ DU drivers

[Biju Das]

Add my self as maintainer for RZ DU drivers.
While at it, update the entries for common parts, rcar-du and shmobile.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
v10->v11:
 * No change.
v9->v10:
 * No change.
v8->v9:
 * Added Rb tag from Laurent.
 * Updated entries for common parts(Makefile and Kconfig).
v8:
 * New patch
---
 MAINTAINERS | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index d787a18a76c4..12f202afddff 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6997,7 +6997,7 @@ F:	drivers/gpu/host1x/
 F:	include/linux/host1x.h
 F:	include/uapi/drm/tegra_drm.h
 
-DRM DRIVERS FOR RENESAS
+DRM DRIVERS FOR RENESAS RCAR AND SHMOBILE
 M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 M:	Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
 L:	dri-devel@lists.freedesktop.org
@@ -7008,9 +7008,20 @@ F:	Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml
 F:	Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.yaml
 F:	Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml
 F:	Documentation/devicetree/bindings/display/renesas,du.yaml
-F:	drivers/gpu/drm/renesas/
+F:	drivers/gpu/drm/renesas/Kconfig
+F:	drivers/gpu/drm/renesas/Makefile
+F:	drivers/gpu/drm/renesas/rcar-du/
+F:	drivers/gpu/drm/renesas/shmobile/
 F:	include/linux/platform_data/shmob_drm.h
 
+DRM DRIVERS FOR RENESAS RZ
+M:	Biju Das <biju.das.jz@bp.renesas.com>
+L:	dri-devel@lists.freedesktop.org
+L:	linux-renesas-soc@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml
+F:	drivers/gpu/drm/renesas/rz-du/
+
 DRM DRIVERS FOR ROCKCHIP
 M:	Sandy Huang <hjc@rock-chips.com>
 M:	Heiko Stübner <heiko@sntech.de>
-- 
2.25.1

Re: [PATCH v11 1/4] dt-bindings: display: Document Renesas RZ/G2L DU bindings

[Rob Herring]

On Mon, 02 Oct 2023 13:27:37 +0100, Biju Das wrote:
> The RZ/G2L LCD controller is composed of Frame Compression Processor
> (FCPVD), Video Signal Processor (VSPD), and Display Unit (DU).
> 
> The DU module supports the following hardware features
> − Display Parallel Interface (DPI) and MIPI LINK Video Interface
> − Display timing master
> − Generates video timings
> − Selecting the polarity of output DCLK, HSYNC, VSYNC, and DE
> − Supports Progressive
> − Input data format (from VSPD): RGB888, RGB666
> − Output data format: same as Input data format
> − Supporting Full HD (1920 pixels x 1080 lines) for MIPI-DSI Output
> − Supporting WXGA (1280 pixels x 800 lines) for Parallel Output
> 
> This patch documents the DU module found on RZ/G2L LCDC.
> 
> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
> Reviewed-by: Rob Herring <robh@kernel.org>
> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> ---
> v10->v1:
>  * No change
> v9->v10:
>  * Added Rb tag from Laurent
>  * Updated the commit description.
>  * Updated description of the port by dropping the text "specified in
>    Documentation/devicetree/bindings/graph.txt."
>  * Dropped empty endpoint from example.
> v8->v9:
>  * No change
> v7->v8:
>  * No change
> v6->v7:
>  * No change
> v5->v6:
>  * No change.
> v4->v5:
>  * Added Rb tag from Rob.
> v3->v4:
>  * Changed compatible name from renesas,du-r9a07g044->renesas,r9a07g044-du
>  * started using same compatible for RZ/G2{L,LC}
> v3: New patch
> ---
>  .../bindings/display/renesas,rzg2l-du.yaml    | 121 ++++++++++++++++++
>  1 file changed, 121 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:
./Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml:64:11: [error] string value is redundantly quoted with any quotes (quoted-strings)

dtschema/dtc warnings/errors:

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20231002122740.220177-2-biju.das.jz@bp.renesas.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.

RE: [PATCH v11 1/4] dt-bindings: display: Document Renesas RZ/G2L DU bindings

[Biju Das]

Hi Rob,

> Subject: Re: [PATCH v11 1/4] dt-bindings: display: Document Renesas RZ/G2L
> DU bindings
> 
> 
> On Mon, 02 Oct 2023 13:27:37 +0100, Biju Das wrote:
> > The RZ/G2L LCD controller is composed of Frame Compression Processor
> > (FCPVD), Video Signal Processor (VSPD), and Display Unit (DU).
> >
> > The DU module supports the following hardware features − Display
> > Parallel Interface (DPI) and MIPI LINK Video Interface − Display
> > timing master − Generates video timings − Selecting the polarity of
> > output DCLK, HSYNC, VSYNC, and DE − Supports Progressive − Input data
> > format (from VSPD): RGB888, RGB666 − Output data format: same as Input
> > data format − Supporting Full HD (1920 pixels x 1080 lines) for
> > MIPI-DSI Output − Supporting WXGA (1280 pixels x 800 lines) for
> > Parallel Output
> >
> > This patch documents the DU module found on RZ/G2L LCDC.
> >
> > Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
> > Reviewed-by: Rob Herring <robh@kernel.org>
> > Reviewed-by: Laurent Pinchart
> > <laurent.pinchart+renesas@ideasonboard.com>
> > ---
> > v10->v1:
> >  * No change
> > v9->v10:
> >  * Added Rb tag from Laurent
> >  * Updated the commit description.
> >  * Updated description of the port by dropping the text "specified in
> >    Documentation/devicetree/bindings/graph.txt."
> >  * Dropped empty endpoint from example.
> > v8->v9:
> >  * No change
> > v7->v8:
> >  * No change
> > v6->v7:
> >  * No change
> > v5->v6:
> >  * No change.
> > v4->v5:
> >  * Added Rb tag from Rob.
> > v3->v4:
> >  * Changed compatible name from
> > renesas,du-r9a07g044->renesas,r9a07g044-du
> >  * started using same compatible for RZ/G2{L,LC}
> > v3: New patch
> > ---
> >  .../bindings/display/renesas,rzg2l-du.yaml    | 121 ++++++++++++++++++
> >  1 file changed, 121 insertions(+)
> >  create mode 100644
> > Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml
> >
> 
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
> 
> yamllint warnings/errors:
> ./Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml:64:11:
> [error] string value is redundantly quoted with any quotes (quoted-strings)
> 
> dtschema/dtc warnings/errors:
> 
> doc reference errors (make refcheckdocs):
> 
> See
> 
> The base for the series is generally the latest rc1. A different dependency
> should be noted in *this* patch.
> 
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
> 
> pip3 install dtschema --upgrade
> 
> Please check and re-submit after running the above command yourself. Note
> that DT_SCHEMA_FILES can be set to your schema file to speed up checking
> your schema. However, it must be unset to test all examples with your
> schema.

I will send V12 dropping quotes 
"/schemas/types.yaml#/definitions/phandle-array" after
the driver review.

Cheers,
Biju

Re: [PATCH v11 3/4] drm: renesas: Add RZ/G2L DU Support

[Geert Uytterhoeven]

Hi Biju,

On Mon, Oct 2, 2023 at 2:28 PM Biju Das <biju.das.jz@bp.renesas.com> wrote:
> The LCD controller is composed of Frame Compression Processor (FCPVD),
> Video Signal Processor (VSPD), and Display Unit (DU).
>
> It has DPI/DSI interfaces and supports a maximum resolution of 1080p
> along with 2 RPFs to support the blending of two picture layers and
> raster operations (ROPs).
>
> The DU module is connected to VSPD. Add RZ/G2L DU support for RZ/G2L
> alike SoCs.
>
> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>

Thanks for your patch!

> v9->v10:

>  * Added rzg2l_du_write() wrapper function.

> --- /dev/null
> +++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c

> +static inline void rzg2l_du_write(struct rzg2l_du_device *rcdu, u32 reg, u32 data)
> +{
> +       writel(data, rcdu->mmio + reg);
> +}

What is the added value of this wrapper?
The order of the reg/data parameters is the inverse of the
standard writel() operation...

> +       rzg2l_du_write(rcdu, DU_DITR0, ditr0);

... and using it actually needs one more keystroke than open-coding it:

-       writel(ditr0, rcdu->mmio + DU_DITR0);

Sorry for missing this before.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

RE: [PATCH v11 3/4] drm: renesas: Add RZ/G2L DU Support

[Biju Das]

Hi Geert Uytterhoeven,


Thanks for the feedback.

> Subject: Re: [PATCH v11 3/4] drm: renesas: Add RZ/G2L DU Support
> 
> Hi Biju,
> 
> On Mon, Oct 2, 2023 at 2:28 PM Biju Das <biju.das.jz@bp.renesas.com>
> wrote:
> > The LCD controller is composed of Frame Compression Processor (FCPVD),
> > Video Signal Processor (VSPD), and Display Unit (DU).
> >
> > It has DPI/DSI interfaces and supports a maximum resolution of 1080p
> > along with 2 RPFs to support the blending of two picture layers and
> > raster operations (ROPs).
> >
> > The DU module is connected to VSPD. Add RZ/G2L DU support for RZ/G2L
> > alike SoCs.
> >
> > Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
> 
> Thanks for your patch!
> 
> > v9->v10:
> 
> >  * Added rzg2l_du_write() wrapper function.
> 
> > --- /dev/null
> > +++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c
> 
> > +static inline void rzg2l_du_write(struct rzg2l_du_device *rcdu, u32
> > +reg, u32 data) {
> > +       writel(data, rcdu->mmio + reg); }
> 
> What is the added value of this wrapper?

I think, for debugging we can add some prints here and check reg values. Other than I don't see
any benefit here. Laurent/ Jacopo please confirm.

> The order of the reg/data parameters is the inverse of the standard
> writel() operation...

OK.

> 
> > +       rzg2l_du_write(rcdu, DU_DITR0, ditr0);
> 
> ... and using it actually needs one more keystroke than open-coding it:
> 
> -       writel(ditr0, rcdu->mmio + DU_DITR0);
> 
> Sorry for missing this before.

I have changed this based on review comment from Laurent and Jacopo. If the wrapper
is not adding value, I am happy to use writel instead.

Please confirm.

Cheers,
Biju

RE: [PATCH v11 0/4] Add RZ/{G2L,G2LC} and RZ/V2L Display Unit support

[Biju Das]

Hi Jacopo, Laurent and all,

Gentle ping. Are we happy with this patch series?

Please let me know.

Cheers,
Biju



> -----Original Message-----
> From: Biju Das <biju.das.jz@bp.renesas.com>
> Sent: Monday, October 2, 2023 1:28 PM
> Subject: [PATCH v11 0/4] Add RZ/{G2L,G2LC} and RZ/V2L Display Unit support
> 
> This path series aims to add support for RZ/G2L DU DRM driver.
> 
> RZ/G2L LCD controller composed of Frame compression Processor(FCPVD),
> Video signal processor (VSPD) and Display unit(DU). The output of LCDC is
> connected to Display parallel interface and MIPI link video interface.
> 
> The output from DSI is connected to ADV7535.
> 
> Ref:
> 
> This patch series is tested with [2]
> [2]
> 
> v10->v11:
> * Replaced CONFIG_DRM_RCAR_VSP->CONFIG_VIDEO_RENESAS_VSP1 for building
>   rzg2l_du_vsp driver.
> * Dropped "rzg2l_du_regs.h" instead the relevant definitions defined in
>   .c file.
> * Dropped setting ditr5 based on latest HW manual 1.3.0/1.4.0
> * Updated the comment for auto clear.
> * Replaced writel()->rzg2l_du_write() in rzg2l_du_start_stop().
> * Dropped CRC related functions as it does not have DISCOM.
> * Replaced the variable possible_crtcs->possible_outputs in
>   struct rzg2l_du_output_routing.
> * Updated DMA_BIT_MASK from 40->32.
> * Dropped unneeded struct drm_bridge from rzg2l_du_drv.h.
> * Dropped colour keying support as it doesn't have planes.
> * Added only RGB formats in rzg2l_du_format_infos.
> * Dropped chroma planes from rzg2l_du_fb_create().
> * Updated the comment for max_pitch in rzg2l_du_fb_create().
> * Dropped possible_crtcs check in rzg2l_du_encoders_init().
> * Dropped additional empty line from struct rzg2l_du_device.
> v9->v10:
>  * patch#1 is mainlined, so dropped from this series.
>  * Added Rb tag from Laurent for the binding patch.
>  * Updated the commit description.
>  * Updated description of the port by dropping the text "specified in
>    Documentation/devicetree/bindings/graph.txt."
>  * Dropped empty endpoint from example.
>  * Dropped ARM64 dependency from Kconfig.
>  * Sorted the configs alphabetically in Kconfig.
>  * Dropped DRM_RCAR_VSP config option and make DRM_RZG2L_DU depend on
>    VIDEO_RENESAS_VSP1.
>  * On rzg2l_du_crtc_set_display_timing() replaced the setting of parent
>    clk rate with dclk rate.
>  * Added rzg2l_du_write() wrapper function.
>  * Updated the comment atomic_begin->atomic_flush.
>  * Dropped .atomic_check and .atomic_begin callback
>  * Renamed __rzg2l_du_crtc_plane_atomic_check->__rzg2l_du_vsp_plane_atomic
>    _check and moved it to rzg2l_du_vsp.c
>  * Added struct clk in rzg2l_du_crtc.h
>  * Dropped the variables mmio_offset,index,vblank_lock,vblank_wait,
>    vblank_count from struct rzg2l_du_crtc.
>  * Replaced the macro to_rzg2l_crtc with static inline functions.
>  * Dropped the unneeded header files clk.h, io.h, mm.h, pm.h, slab.h,
>    wait.h and drm_managed.h from rzg2l_du_drv.c.
>  * Replaced DRM_INFO->drm_info
>  * Dropped the callbacks prime_handle_to_fd, prime_fd_to_handle and
>    gem_prime_mmap.
>  * Replaced the callback remove->remove_new.
>  * Dropped header file wait.h and added forward declarations struct clk
> and
>    rzg2l_du_device from rzg2l_du_drv.h.
>  * Dropped the dsi and dpad0_source variables from struct rzg2l_du_device.
>  * Replaced the macro to_rzg2l_encoder with static inline functions.
>  * Dropped header files dma-buf.h and wait.h from rzg2l_du_kms.c.
>  * Dropped struct sg_table and added the scatterlist.h header file in
>    rzg2l_du_vsp.h
>  * Added container_of.h header file, forward declarations struct device
> and
>    struct rzg2l_du_device in rzg2l_du_vsp.h.
> v8->v9:
>  * Added Rb tag from Laurent and Acked-by tag from Kieran for patch#1.
>  * Added Rb tag from Laurent and Geert for patch#3.
>  * Dropped reset_control_assert() from error patch for rzg2l_du_crtc_get()
> as
>    suggested by Philipp Zabel.
>  * Added Rb tag from Laurent oatch#5.
>  * Updated MAINTAINERS entries for common parts(Makefile and Kconfig).
> v7->v8:
>  * Moved rcar-du and shmobile DRM drivers to renesas specific vendor
> directory.
>  * Fixed the typo vsp2->du in RZ/V2L DU bindings patch.
>  * Added Rb tag from Rob for RZ/V2L DU bindings patch.
>  * Dropped RCar du lib and created RZ/G2L DU DRM driver by creating rz_du
> folder.
>  * Updated MAINTAINERS entries.
> v6->v7:
>  * Split DU lib and  RZ/G2L du driver as separate patch series as
>    DU support added to more platforms based on RZ/G2L alike SoCs.
>  * Rebased to latest drm-tip.
>  * Added patch #2 for binding support for RZ/V2L DU
>  * Added patch #4 for driver support for RZ/V2L DU
>  * Added patch #5 for SoC DTSI support for RZ/G2L DU
>  * Added patch #6 for SoC DTSI support for RZ/V2L DU
>  * Added patch #7 for Enabling DU on SMARC EVK based on RZ/{G2L,V2L} SoCs.
>  * Added patch #8 for Enabling DU on SMARC EVK based on RZ/G2LC SoC.
> v5->v6:
>  * Merged DU lib and RZ/G2L du driver in same patch series
>  * Rebased to latest drm-misc.
>  * Merged patch#1 to RZ/G2L Driver patch.
>  * Updated KConfig dependency from ARCH_RENESAS->ARCH_RZG2L.
>  * Optimized rzg2l_du_output_name() by removing unsupported outputs.
> 
> v4->v5:
>  * Added Rb tag from Rob for binding patch.
>  * Started using RCar DU libs(kms, vsp and encoder)
>  * Started using rcar_du_device, rcar_du_write, rcar_du_crtc,
>    rcar_du_format_info and rcar_du_encoder.
> v3->v4:
>  * Changed compatible name from renesas,du-r9a07g044->renesas,r9a07g044-du
>  * started using same compatible for RZ/G2{L,LC}
>  * Removed rzg2l_du_group.h and struct rzg2l_du_group
>  * Renamed __rzg2l_du_group_start_stop->rzg2l_du_start_stop
>  * Removed rzg2l_du_group_restart
>  * Updated rzg2l_du_crtc_set_display_timing
>  * Removed mode_valid callback.
>  * Updated rzg2l_du_crtc_create() parameters
>  * Updated compatible
>  * Removed RZG2L_DU_MAX_GROUPS
> V2->v3:
>  * Added new bindings for RZ/G2L DU
>  * Removed indirection and created new DRM driver based on R-Car DU
> v1->v2:
>  * Based on [1], all references to 'rzg2l_lcdc' replaced with 'rzg2l_du'
>  * Updated commit description for bindings
>  * Removed LCDC references from bindings
>  * Changed clock name from du.0->aclk from bindings
>  * Changed reset name from du.0->du from bindings
>  * Replaced crtc_helper_funcs->rcar_crtc_helper_funcs
>  * Updated macro DRM_RZG2L_LCDC->DRM_RZG2L_DU
>  * Replaced rzg2l-lcdc-drm->rzg2l-du-drm
>  * Added forward declaration for struct reset_control
> 
> [1]
> https://jpn01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpatchwor
> k.kernel.org%2Fproject%2Flinux-renesas-soc%2Fpatch%2F20220312084205.31462-
> 2-
> biju.das.jz%40bp.renesas.com%2F&data=05%7C01%7Cbiju.das.jz%40bp.renesas.co
> m%7Ce669be40ca4449ebb44708dbc342fc7a%7C53d82571da1947e49cb4625a166a4a2a%7C
> 0%7C0%7C638318464751238898%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJ
> QIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=jlkoTMl1
> V3JfKQchd3o0HhWvgppWE3q%2FBjejCWLcxX8%3D&reserved=0
> 
> Biju Das (4):
>   dt-bindings: display: Document Renesas RZ/G2L DU bindings
>   dt-bindings: display: renesas,rzg2l-du: Document RZ/V2L DU bindings
>   drm: renesas: Add RZ/G2L DU Support
>   MAINTAINERS: Add maintainer for RZ DU drivers
> 
>  .../bindings/display/renesas,rzg2l-du.yaml    | 126 +++++
>  MAINTAINERS                                   |  15 +-
>  drivers/gpu/drm/renesas/Kconfig               |   1 +
>  drivers/gpu/drm/renesas/Makefile              |   1 +
>  drivers/gpu/drm/renesas/rz-du/Kconfig         |  12 +
>  drivers/gpu/drm/renesas/rz-du/Makefile        |   8 +
>  drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c | 438 ++++++++++++++++
> drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.h |  89 ++++
> drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c  | 176 +++++++
> drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h  |  78
> +++  .../gpu/drm/renesas/rz-du/rzg2l_du_encoder.c  |  72
> +++  .../gpu/drm/renesas/rz-du/rzg2l_du_encoder.h  |  32 ++
> drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.c  | 441 ++++++++++++++++
> drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.h  |  43 ++
> drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.c  | 469 ++++++++++++++++++
> drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.h  |  97 ++++
>  16 files changed, 2096 insertions(+), 2 deletions(-)  create mode 100644
> Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml
>  create mode 100644 drivers/gpu/drm/renesas/rz-du/Kconfig
>  create mode 100644 drivers/gpu/drm/renesas/rz-du/Makefile
>  create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c
>  create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.h
>  create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c
>  create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h
>  create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.c
>  create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.h
>  create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.c
>  create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.h
>  create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.c
>  create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.h
> 
> --
> 2.25.1