Linux-Renesas-SoC Archive on lore.kernel.org
 help / color / Atom feed
From: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
To: Jacopo Mondi <jacopo+renesas@jmondi.org>,
	laurent.pinchart@ideasonboard.com, geert@linux-m68k.org,
	horms@verge.net.au, uli+renesas@fpond.eu,
	VenkataRajesh.Kalakodima@in.bosch.com
Cc: airlied@linux.ie, daniel@ffwll.ch, koji.matsuoka.xm@renesas.com,
	muroya@ksk.co.jp, Harsha.ManjulaMallikarjun@in.bosch.com,
	linux-renesas-soc@vger.kernel.org,
	dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v4 9/9] arm64: dts: renesas: Add CMM units to Gen3 SoCs
Date: Wed, 11 Sep 2019 19:16:31 +0100
Message-ID: <49012496-1a6e-d62c-2882-45ed8aeb88f7@ideasonboard.com> (raw)
In-Reply-To: <20190906135436.10622-10-jacopo+renesas@jmondi.org>

Hi Jacopo,

On 06/09/2019 14:54, Jacopo Mondi wrote:
> Add CMM units to Renesas R-Car Gen3 SoC that support it, and reference them
> from the Display Unit they are connected to.
> 
> Sort the 'vsps' and 'renesas,cmm' entries in the DU unit consistently
> in all the involved DTS.

I think if you chose the ordering in the r8a7795, then you only have to
adjust/correct the ordering in the r8a7796 and r8a77965 ...

Especially as you haven't changed the ordering of r8a77970, and r8a77980
which have the status after the vsps entry.


> 
> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> ---
>  arch/arm64/boot/dts/renesas/r8a7795.dtsi  | 40 ++++++++++++++++++++++-
>  arch/arm64/boot/dts/renesas/r8a7796.dtsi  | 28 ++++++++++++++++
>  arch/arm64/boot/dts/renesas/r8a77965.dtsi | 28 ++++++++++++++++
>  arch/arm64/boot/dts/renesas/r8a77990.dtsi | 22 ++++++++++++-
>  arch/arm64/boot/dts/renesas/r8a77995.dtsi | 22 ++++++++++++-
>  5 files changed, 137 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
> index 6675462f7585..67c242a447bc 100644
> --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
> @@ -2939,6 +2939,42 @@
>  			iommus = <&ipmmu_vi1 10>;
>  		};
>  
> +		cmm0: cmm@fea40000 {
> +			compatible = "renesas,r8a7795-cmm",
> +				     "renesas,rcar-gen3-cmm";
> +			reg = <0 0xfea40000 0 0x1000>;
> +			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> +			clocks = <&cpg CPG_MOD 711>;
> +			resets = <&cpg 711>;
> +		};
> +
> +		cmm1: cmm@fea50000 {
> +			compatible = "renesas,r8a7795-cmm",
> +				     "renesas,rcar-gen3-cmm";
> +			reg = <0 0xfea50000 0 0x1000>;
> +			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> +			clocks = <&cpg CPG_MOD 710>;
> +			resets = <&cpg 710>;
> +		};
> +
> +		cmm2: cmm@fea60000 {
> +			compatible = "renesas,r8a7795-cmm",
> +				     "renesas,rcar-gen3-cmm";
> +			reg = <0 0xfea60000 0 0x1000>;
> +			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> +			clocks = <&cpg CPG_MOD 709>;
> +			resets = <&cpg 709>;
> +		};
> +
> +		cmm3: cmm@fea70000 {
> +			compatible = "renesas,r8a7795-cmm",
> +				     "renesas,rcar-gen3-cmm";
> +			reg = <0 0xfea70000 0 0x1000>;
> +			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> +			clocks = <&cpg CPG_MOD 708>;
> +			resets = <&cpg 708>;
> +		};
> +
>  		csi20: csi2@fea80000 {
>  			compatible = "renesas,r8a7795-csi2";
>  			reg = <0 0xfea80000 0 0x10000>;
> @@ -3142,9 +3178,11 @@
>  				 <&cpg CPG_MOD 722>,
>  				 <&cpg CPG_MOD 721>;
>  			clock-names = "du.0", "du.1", "du.2", "du.3";
> -			vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd0 1>;
>  			status = "disabled";

I'm not sure the vsps should be below the status = disabled line.

I'd have this as:

	clock-names...
	vsps...
	renesas,cmms...
		<blank line>
	status...
		<blank line>
	ports...

>  
> +			vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd0 1>;
> +			renesas,cmms = <&cmm0 &cmm1 &cmm2 &cmm3>;

I think these should be separated by comma's to show they are separate
references, or references to separate phandles or such.

The only precedence I could find was in pmu_a53:

          interrupt-affinity = <&a53_0>, <&a53_1>, <&a53_2>, <&a53_3>;


> +
>  			ports {
>  				#address-cells = <1>;
>  				#size-cells = <0>;
> diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
> index 822c96601d3c..837c3b2da773 100644
> --- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
> @@ -2641,6 +2641,33 @@
>  			renesas,fcp = <&fcpvi0>;
>  		};
>  
> +		cmm0: cmm@fea40000 {
> +			compatible = "renesas,r8a7796-cmm",
> +				     "renesas,rcar-gen3-cmm";
> +			reg = <0 0xfea40000 0 0x1000>;
> +			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
> +			clocks = <&cpg CPG_MOD 711>;
> +			resets = <&cpg 711>;
> +		};
> +
> +		cmm1: cmm@fea50000 {
> +			compatible = "renesas,r8a7796-cmm",
> +				     "renesas,rcar-gen3-cmm";
> +			reg = <0 0xfea50000 0 0x1000>;
> +			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
> +			clocks = <&cpg CPG_MOD 710>;
> +			resets = <&cpg 710>;
> +		};
> +
> +		cmm2: cmm@fea60000 {
> +			compatible = "renesas,r8a7796-cmm",
> +				     "renesas,rcar-gen3-cmm";
> +			reg = <0 0xfea60000 0 0x1000>;
> +			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
> +			clocks = <&cpg CPG_MOD 709>;
> +			resets = <&cpg 709>;
> +		};
> +
>  		csi20: csi2@fea80000 {
>  			compatible = "renesas,r8a7796-csi2";
>  			reg = <0 0xfea80000 0 0x10000>;
> @@ -2794,6 +2821,7 @@
>  			status = "disabled";
>  
>  			vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>;
> +			renesas,cmms = <&cmm0 &cmm1 &cmm2>;

Aha, yes, I'd move this vsps rather than the one at r8a7795, which I'd
consider to be more 'correct'.


>  
>  			ports {
>  				#address-cells = <1>;
> diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
> index 4ae163220f60..c7635e8b261c 100644
> --- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
> @@ -2320,6 +2320,33 @@
>  			resets = <&cpg 611>;
>  		};
>  
> +		cmm0: cmm@fea40000 {
> +			compatible = "renesas,r8a77965-cmm",
> +				     "renesas,rcar-gen3-cmm";
> +			reg = <0 0xfea40000 0 0x1000>;
> +			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
> +			clocks = <&cpg CPG_MOD 711>;
> +			resets = <&cpg 711>;
> +		};
> +
> +		cmm1: cmm@fea50000 {
> +			compatible = "renesas,r8a77965-cmm",
> +				     "renesas,rcar-gen3-cmm";
> +			reg = <0 0xfea50000 0 0x1000>;
> +			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
> +			clocks = <&cpg CPG_MOD 710>;
> +			resets = <&cpg 710>;
> +		};
> +
> +		cmm3: cmm@fea70000 {
> +			compatible = "renesas,r8a77965-cmm",
> +				     "renesas,rcar-gen3-cmm";
> +			reg = <0 0xfea70000 0 0x1000>;
> +			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
> +			clocks = <&cpg CPG_MOD 708>;
> +			resets = <&cpg 708>;
> +		};
> +
>  		csi20: csi2@fea80000 {
>  			compatible = "renesas,r8a77965-csi2";
>  			reg = <0 0xfea80000 0 0x10000>;
> @@ -2470,6 +2497,7 @@
>  			status = "disabled";
>  
>  			vsps = <&vspd0 0>, <&vspd1 0>, <&vspd0 1>;
> +			renesas,cmms = <&cmm0 &cmm1 &cmm3>;

Again, I'd consider this the wrong sort order, due to the status'
importance. I wouldn't hide it in the middle.

>  
>  			ports {
>  				#address-cells = <1>;
> diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
> index 455954c3d98e..5e3d758a033f 100644
> --- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
> @@ -1727,6 +1727,24 @@
>  			iommus = <&ipmmu_vi0 9>;
>  		};
>  
> +		cmm0: cmm@fea40000 {
> +			compatible = "renesas,r8a77990-cmm",
> +				     "renesas,rcar-gen3-cmm";
> +			reg = <0 0xfea40000 0 0x1000>;
> +			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
> +			clocks = <&cpg CPG_MOD 711>;
> +			resets = <&cpg 711>;
> +		};
> +
> +		cmm1: cmm@fea50000 {
> +			compatible = "renesas,r8a77990-cmm",
> +				     "renesas,rcar-gen3-cmm";
> +			reg = <0 0xfea50000 0 0x1000>;
> +			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
> +			clocks = <&cpg CPG_MOD 710>;
> +			resets = <&cpg 710>;
> +		};
> +
>  		csi40: csi2@feaa0000 {
>  			compatible = "renesas,r8a77990-csi2";
>  			reg = <0 0xfeaa0000 0 0x10000>;
> @@ -1768,9 +1786,11 @@
>  			clock-names = "du.0", "du.1";
>  			resets = <&cpg 724>;
>  			reset-names = "du.0";
> -			vsps = <&vspd0 0>, <&vspd1 0>;
>  			status = "disabled";
>  
> +			vsps = <&vspd0 0>, <&vspd1 0>;
> +			renesas,cmms = <&cmm0 &cmm1>;


Same ... :D

> +
>  			ports {
>  				#address-cells = <1>;
>  				#size-cells = <0>;
> diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
> index 183fef86cf7c..6838a81f5caa 100644
> --- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
> @@ -993,6 +993,24 @@
>  			iommus = <&ipmmu_vi0 9>;
>  		};
>  
> +		cmm0: cmm@fea40000 {
> +			compatible = "renesas,r8a77995-cmm",
> +				     "renesas,rcar-gen3-cmm";
> +			reg = <0 0xfea40000 0 0x1000>;
> +			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
> +			clocks = <&cpg CPG_MOD 711>;
> +			resets = <&cpg 711>;
> +		};
> +
> +		cmm1: cmm@fea50000 {
> +			compatible = "renesas,r8a77995-cmm",
> +				     "renesas,rcar-gen3-cmm";
> +			reg = <0 0xfea50000 0 0x1000>;
> +			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
> +			clocks = <&cpg CPG_MOD 710>;
> +			resets = <&cpg 710>;
> +		};
> +
>  		du: display@feb00000 {
>  			compatible = "renesas,du-r8a77995";
>  			reg = <0 0xfeb00000 0 0x40000>;
> @@ -1003,9 +1021,11 @@
>  			clock-names = "du.0", "du.1";
>  			resets = <&cpg 724>;
>  			reset-names = "du.0";
> -			vsps = <&vspd0 0>, <&vspd1 0>;
>  			status = "disabled";
>  
> +			vsps = <&vspd0 0>, <&vspd1 0>;
> +			renesas,cmms = <&cmm0 &cmm1>;
> +

Same.

>  			ports {
>  				#address-cells = <1>;
>  				#size-cells = <0>;
> 


  reply index

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-06 13:54 [PATCH v4 0/9 drm: rcar-du: Add Color Management Module (CMM) Jacopo Mondi
2019-09-06 13:54 ` [PATCH v4 1/9] dt-bindings: display: renesas,cmm: Add R-Car CMM documentation Jacopo Mondi
2019-09-11 19:04   ` Kieran Bingham
2019-09-17 17:55   ` Rob Herring
2019-09-18 22:08   ` Laurent Pinchart
2019-09-06 13:54 ` [PATCH v4 2/9] dt-bindings: display, renesas,du: Document cmms property Jacopo Mondi
2019-09-11 16:06   ` Kieran Bingham
2019-09-17 17:58     ` Rob Herring
2019-09-06 13:54 ` [PATCH v4 3/9] drm: rcar-du: Add support for CMM Jacopo Mondi
2019-09-11 15:54   ` Kieran Bingham
2019-09-12  7:59     ` Jacopo Mondi
2019-09-12  9:49       ` Kieran Bingham
2019-09-18 22:55   ` Laurent Pinchart
2019-09-19  8:59     ` Kieran Bingham
2019-09-20 22:43       ` Laurent Pinchart
2019-10-10 17:46     ` Jacopo Mondi
2019-10-14 23:54       ` Laurent Pinchart
2019-09-06 13:54 ` [PATCH v4 4/9] drm: rcar-du: Claim CMM support for Gen3 SoCs Jacopo Mondi
2019-09-11 18:45   ` Kieran Bingham
2019-09-06 13:54 ` [PATCH v4 5/9] drm: rcar-du: kms: Initialize CMM instances Jacopo Mondi
2019-09-12  9:27   ` Kieran Bingham
2019-09-06 13:54 ` [PATCH v4 6/9] drm: rcar-du: crtc: Enable and disable CMMs Jacopo Mondi
2019-09-11 18:40   ` Kieran Bingham
2019-09-12  8:07     ` Jacopo Mondi
2019-09-12  9:19       ` Kieran Bingham
2019-09-18 23:23         ` Laurent Pinchart
2019-09-19  8:08           ` Kieran Bingham
2019-09-20 22:44             ` Laurent Pinchart
2019-09-06 13:54 ` [PATCH v4 7/9] drm: rcar-du: crtc: Register GAMMA_LUT properties Jacopo Mondi
2019-09-11 18:47   ` Kieran Bingham
2019-09-06 13:54 ` [PATCH v4 8/9] drm: rcar-du: kms: Update CMM in atomic commit tail Jacopo Mondi
2019-09-12  9:51   ` Kieran Bingham
2019-09-20 22:49   ` Laurent Pinchart
2019-09-30 20:53   ` Ezequiel Garcia
2019-10-01 19:20     ` Laurent Pinchart
2019-09-06 13:54 ` [PATCH v4 9/9] arm64: dts: renesas: Add CMM units to Gen3 SoCs Jacopo Mondi
2019-09-11 18:16   ` Kieran Bingham [this message]
2019-09-11 19:35     ` Geert Uytterhoeven

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=49012496-1a6e-d62c-2882-45ed8aeb88f7@ideasonboard.com \
    --to=kieran.bingham+renesas@ideasonboard.com \
    --cc=Harsha.ManjulaMallikarjun@in.bosch.com \
    --cc=VenkataRajesh.Kalakodima@in.bosch.com \
    --cc=airlied@linux.ie \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=geert@linux-m68k.org \
    --cc=horms@verge.net.au \
    --cc=jacopo+renesas@jmondi.org \
    --cc=koji.matsuoka.xm@renesas.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=muroya@ksk.co.jp \
    --cc=uli+renesas@fpond.eu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Renesas-SoC Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-renesas-soc/0 linux-renesas-soc/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-renesas-soc linux-renesas-soc/ https://lore.kernel.org/linux-renesas-soc \
		linux-renesas-soc@vger.kernel.org
	public-inbox-index linux-renesas-soc

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-renesas-soc


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git