linux-renesas-soc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Lad, Prabhakar" <prabhakar.csengg@gmail.com>
To: Jonathan Cameron <jic23@kernel.org>
Cc: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>,
	Geert Uytterhoeven <geert+renesas@glider.be>,
	Rob Herring <robh+dt@kernel.org>,
	Lars-Peter Clausen <lars@metafoo.de>,
	Magnus Damm <magnus.damm@gmail.com>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	Alexandru Ardelean <aardelean@deviqon.com>,
	linux-iio <linux-iio@vger.kernel.org>,
	"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
	<devicetree@vger.kernel.org>,
	Linux-Renesas <linux-renesas-soc@vger.kernel.org>,
	LKML <linux-kernel@vger.kernel.org>,
	Biju Das <biju.das.jz@bp.renesas.com>
Subject: Re: [PATCH v3 2/3] iio: adc: Add driver for Renesas RZ/G2L A/D converter
Date: Sun, 1 Aug 2021 20:51:18 +0100	[thread overview]
Message-ID: <CA+V-a8ukR39BsvUd055p8w-kafZ-SQDXydkJXag7c+7m3MEihg@mail.gmail.com> (raw)
In-Reply-To: <20210801175947.2b49878d@jic23-huawei>

Hi Jonathan,

On Sun, Aug 1, 2021 at 5:57 PM Jonathan Cameron <jic23@kernel.org> wrote:
>
> On Sat, 31 Jul 2021 19:31:52 +0100
> "Lad, Prabhakar" <prabhakar.csengg@gmail.com> wrote:
>
> > Hi Jonathan,
> >
> > Thank you for the review.
> >
>
> ...
>
> > > > +#define DRIVER_NAME          "rzg2l-adc"
> > >
> > > As only used in one place, just put it inline there so we don't need
> > > to go find if we want to know the value - I'm lazy.
> > >
> > Its being used in two places
> > 1: indio_dev->name = DRIVER_NAME #In probe call
> > 2: .name = DRIVER_NAME # In platform_driver struct
> >
> > Let me know if you want me to replace them inline and drop the above macro.
>
> oops.  Searching apparently failed me ;)  Fine as is.
>
> ...
>
>
> > > > +static const struct iio_info rzg2l_adc_iio_info = {
> > > > +     .read_raw = rzg2l_adc_read_raw,
> > > > +     .read_label = rzg2l_adc_read_label,
> > > > +};
> > > > +
> > > > +static irqreturn_t rzg2l_adc_isr(int irq, void *dev_id)
> > > > +{
> > > > +     struct rzg2l_adc *adc = (struct rzg2l_adc *)dev_id;
> > >
> > > No need for explicit cast from void * to another pointer type.
> > > This is always valid without in C.
> > >
> > Agreed.
> >
> > > > +     unsigned long intst;
> > > > +     u32 reg;
> > > > +     int ch;
> > > > +
> > > > +     reg = rzg2l_adc_readl(adc, RZG2L_ADSTS);
> > > > +
> > > > +     /* A/D conversion channel select error interrupt */
> > > > +     if (reg & RZG2L_ADSTS_CSEST) {
> > > > +             rzg2l_adc_writel(adc, RZG2L_ADSTS, reg);
> > > > +             return IRQ_HANDLED;
> > > > +     }
> > > > +
> > > > +     intst = reg & RZG2L_ADSTS_INTST_MASK;
> > > > +     if (!intst)
> > > > +             return IRQ_NONE;
> > > > +
> > > > +     for_each_set_bit(ch, &intst, RZG2L_ADC_MAX_CHANNELS) {
> > > > +             if (intst & BIT(ch))
> > >
> > > I'm missing how this if can fail given we only end up in here when the bit is
> > > set.
> > >
> > ADC has 8 channels RZG2L_ADSTS register bits [0:7] will be set to 1
> > when the given channel ADC conversion has been completed. So the above
> > if condition checks if the bit is set to 1 and then reads the
> > corresponding value of that channel.
>
> Just looking at the two lines of code above
> for_each_set_bit(ch, &intst, RZG2L_ADC_MAX_CHANNELS)
> will only call the the next line if the bit is set.  E.g. It will only call
> it
> if (intst & BIT(ch))
>
> So you can only get into the body of the for loop if this bit is set and the
> condition is always true.  Hence drop
> if (intst & BIT(ch))
>
Agreed can be dropped.

> >
> > > > +                     adc->last_val[ch] = rzg2l_adc_readl(adc, RZG2L_ADCR(ch)) &
> > > > +                                         RZG2L_ADCR_AD_MASK;
> > > > +     }
> > > > +
> > > > +     /* clear the channel interrupt */
> > > > +     rzg2l_adc_writel(adc, RZG2L_ADSTS, reg);
> > > > +
> > > > +     complete(&adc->completion);
> > > > +
> > > > +     return IRQ_HANDLED;
> > > > +}
> > > > +
>
> ...
>
> > > > +
> > > > +     pm_runtime_enable(dev);
> > >
> > > I think you also want to set the state to suspended to ensure the resume is
> > > called on get.
> > >
> > pm_runtime_set_suspended() should only be called when runtime is
> > disabled or is it that I am missing something ?
>
> If you want the runtime pm code to assume your device is suspended initially
> then you set the state before you call pm_runtime_enable(dev).
>
OK will call pm_runtime_set_suspended() before enabling.

Cheers,
Prabhakar

  reply	other threads:[~2021-08-01 19:51 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-26 18:28 [PATCH v3 0/3] Renesas RZ/G2L ADC driver support Lad Prabhakar
2021-07-26 18:28 ` [PATCH v3 1/3] dt-bindings: iio: adc: Add binding documentation for Renesas RZ/G2L A/D converter Lad Prabhakar
2021-07-26 21:42   ` Rob Herring
2021-07-27  8:06     ` Lad, Prabhakar
2021-07-27 20:30   ` Rob Herring
2021-07-26 18:28 ` [PATCH v3 2/3] iio: adc: Add driver " Lad Prabhakar
2021-07-27  7:13   ` Philipp Zabel
2021-07-27  8:02     ` Lad, Prabhakar
2021-07-27  8:13       ` Philipp Zabel
2021-07-27  8:54         ` Lad, Prabhakar
2021-07-31 17:11   ` Jonathan Cameron
2021-07-31 18:31     ` Lad, Prabhakar
2021-08-01 16:59       ` Jonathan Cameron
2021-08-01 19:51         ` Lad, Prabhakar [this message]
2021-07-26 18:28 ` [PATCH v3 3/3] arm64: dts: renesas: r9a07g044: Add ADC node Lad Prabhakar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CA+V-a8ukR39BsvUd055p8w-kafZ-SQDXydkJXag7c+7m3MEihg@mail.gmail.com \
    --to=prabhakar.csengg@gmail.com \
    --cc=aardelean@deviqon.com \
    --cc=biju.das.jz@bp.renesas.com \
    --cc=devicetree@vger.kernel.org \
    --cc=geert+renesas@glider.be \
    --cc=jic23@kernel.org \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=magnus.damm@gmail.com \
    --cc=p.zabel@pengutronix.de \
    --cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
    --cc=robh+dt@kernel.org \
    --subject='Re: [PATCH v3 2/3] iio: adc: Add driver for Renesas RZ/G2L A/D converter' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).