linux-renesas-soc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH V2] ARM: dts: r8a779x: Configure PMIC IRQ pinmux
@ 2019-05-15  8:23 marek.vasut
  2019-05-15  8:32 ` Geert Uytterhoeven
  0 siblings, 1 reply; 3+ messages in thread
From: marek.vasut @ 2019-05-15  8:23 UTC (permalink / raw)
  To: linux-arm-kernel
  Cc: Marek Vasut, Geert Uytterhoeven, Simon Horman, linux-renesas-soc

From: Marek Vasut <marek.vasut+renesas@gmail.com>

The PMIC IRQ line pin multiplexing configuration is missing from the DTs.
Since the line is configured correctly by default, the system works fine.
However, add the IRQ line pin multiplexing configuration for completeness.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: linux-renesas-soc@vger.kernel.org
To: linux-arm-kernel@lists.infradead.org
---
V2: Move the pin control node from iic3 controller to pmic on 7792 Blanche,
    since there's only one PMIC on that board.
---
 arch/arm/boot/dts/r8a7790-lager.dts   | 7 +++++++
 arch/arm/boot/dts/r8a7790-stout.dts   | 7 ++++++-
 arch/arm/boot/dts/r8a7791-koelsch.dts | 7 +++++++
 arch/arm/boot/dts/r8a7791-porter.dts  | 7 +++++++
 arch/arm/boot/dts/r8a7792-blanche.dts | 7 +++++++
 arch/arm/boot/dts/r8a7793-gose.dts    | 7 +++++++
 6 files changed, 41 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 7b9508e83d46..d637b9727808 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -423,6 +423,8 @@
 	 */
 	i2cpwr: i2c-13 {
 		compatible = "i2c-demux-pinctrl";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq_pins>;
 		i2c-parent = <&iic3>, <&i2c3>;
 		i2c-bus-name = "i2c-pwr";
 		#address-cells = <1>;
@@ -615,6 +617,11 @@
 		function = "iic3";
 	};
 
+	pmic_irq_pins: pmicirq {
+		groups = "intc_irq2";
+		function = "intc";
+	};
+
 	hsusb_pins: hsusb {
 		groups = "usb0_ovc_vbus";
 		function = "usb0";
diff --git a/arch/arm/boot/dts/r8a7790-stout.dts b/arch/arm/boot/dts/r8a7790-stout.dts
index 7a7d3b84d1a6..ad68e6034b43 100644
--- a/arch/arm/boot/dts/r8a7790-stout.dts
+++ b/arch/arm/boot/dts/r8a7790-stout.dts
@@ -179,6 +179,11 @@
 		function = "iic3";
 	};
 
+	pmic_irq_pins: pmicirq {
+		groups = "intc_irq2";
+		function = "intc";
+	};
+
 	usb0_pins: usb0 {
 		groups = "usb0";
 		function = "usb0";
@@ -317,7 +322,7 @@
 
 &iic3 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&iic3_pins>;
+	pinctrl-0 = <&iic3_pins &pmic_irq_pins>;
 	status = "okay";
 
 	pmic@58 {
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index e6580aa0cea3..a116bfc11f0b 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -540,6 +540,11 @@
 		function = "intc";
 	};
 
+	pmic_irq_pins: pmicirq {
+		groups = "intc_irq2";
+		function = "intc";
+	};
+
 	sdhi0_pins: sd0 {
 		groups = "sdhi0_data4", "sdhi0_ctrl";
 		function = "sdhi0";
@@ -776,6 +781,8 @@
 };
 
 &i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_irq_pins>;
 	status = "okay";
 	clock-frequency = <100000>;
 
diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts
index fefdf8238bbe..e08d257f5d0c 100644
--- a/arch/arm/boot/dts/r8a7791-porter.dts
+++ b/arch/arm/boot/dts/r8a7791-porter.dts
@@ -228,6 +228,11 @@
 		function = "intc";
 	};
 
+	pmic_irq_pins: pmicirq {
+		groups = "intc_irq2";
+		function = "intc";
+	};
+
 	sdhi0_pins: sd0 {
 		groups = "sdhi0_data4", "sdhi0_ctrl";
 		function = "sdhi0";
@@ -373,6 +378,8 @@
 };
 
 &i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_irq_pins>;
 	status = "okay";
 	clock-frequency = <100000>;
 
diff --git a/arch/arm/boot/dts/r8a7792-blanche.dts b/arch/arm/boot/dts/r8a7792-blanche.dts
index b6fa80c3b07e..b7af14de7c8e 100644
--- a/arch/arm/boot/dts/r8a7792-blanche.dts
+++ b/arch/arm/boot/dts/r8a7792-blanche.dts
@@ -234,6 +234,11 @@
 		groups = "du1_rgb666", "du1_sync", "du1_disp";
 		function = "du1";
 	};
+
+	pmic_irq_pins: pmicirq {
+		groups = "intc_irq2";
+		function = "intc";
+	};
 };
 
 &rwdt {
@@ -314,6 +319,8 @@
 	pmic@58 {
 		compatible = "dlg,da9063";
 		reg = <0x58>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq_pins>;
 		interrupt-parent = <&irqc>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
index f51601af89a2..9984ebf06695 100644
--- a/arch/arm/boot/dts/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -514,6 +514,11 @@
 		function = "intc";
 	};
 
+	pmic_irq_pins: pmicirq {
+		groups = "intc_irq2";
+		function = "intc";
+	};
+
 	sdhi0_pins: sd0 {
 		groups = "sdhi0_data4", "sdhi0_ctrl";
 		function = "sdhi0";
@@ -711,6 +716,8 @@
 };
 
 &i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_irq_pins>;
 	status = "okay";
 	clock-frequency = <100000>;
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 3+ messages in thread

* Re: [PATCH V2] ARM: dts: r8a779x: Configure PMIC IRQ pinmux
  2019-05-15  8:23 [PATCH V2] ARM: dts: r8a779x: Configure PMIC IRQ pinmux marek.vasut
@ 2019-05-15  8:32 ` Geert Uytterhoeven
  2019-05-16 11:09   ` Simon Horman
  0 siblings, 1 reply; 3+ messages in thread
From: Geert Uytterhoeven @ 2019-05-15  8:32 UTC (permalink / raw)
  To: Marek Vasut
  Cc: Linux ARM, Marek Vasut, Geert Uytterhoeven, Simon Horman, Linux-Renesas

Hi Marek,

On Wed, May 15, 2019 at 10:23 AM <marek.vasut@gmail.com> wrote:
> From: Marek Vasut <marek.vasut+renesas@gmail.com>
>
> The PMIC IRQ line pin multiplexing configuration is missing from the DTs.
> Since the line is configured correctly by default, the system works fine.
> However, add the IRQ line pin multiplexing configuration for completeness.
>
> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
> Cc: Geert Uytterhoeven <geert+renesas@glider.be>
> Cc: Simon Horman <horms+renesas@verge.net.au>
> Cc: linux-renesas-soc@vger.kernel.org
> To: linux-arm-kernel@lists.infradead.org
> ---
> V2: Move the pin control node from iic3 controller to pmic on 7792 Blanche,
>     since there's only one PMIC on that board.

Thanks for the update!

As the tag condition from v1 is now fulfilled:
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [PATCH V2] ARM: dts: r8a779x: Configure PMIC IRQ pinmux
  2019-05-15  8:32 ` Geert Uytterhoeven
@ 2019-05-16 11:09   ` Simon Horman
  0 siblings, 0 replies; 3+ messages in thread
From: Simon Horman @ 2019-05-16 11:09 UTC (permalink / raw)
  To: Geert Uytterhoeven
  Cc: Marek Vasut, Linux ARM, Marek Vasut, Geert Uytterhoeven, Linux-Renesas

On Wed, May 15, 2019 at 10:32:18AM +0200, Geert Uytterhoeven wrote:
> Hi Marek,
> 
> On Wed, May 15, 2019 at 10:23 AM <marek.vasut@gmail.com> wrote:
> > From: Marek Vasut <marek.vasut+renesas@gmail.com>
> >
> > The PMIC IRQ line pin multiplexing configuration is missing from the DTs.
> > Since the line is configured correctly by default, the system works fine.
> > However, add the IRQ line pin multiplexing configuration for completeness.
> >
> > Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
> > Cc: Geert Uytterhoeven <geert+renesas@glider.be>
> > Cc: Simon Horman <horms+renesas@verge.net.au>
> > Cc: linux-renesas-soc@vger.kernel.org
> > To: linux-arm-kernel@lists.infradead.org
> > ---
> > V2: Move the pin control node from iic3 controller to pmic on 7792 Blanche,
> >     since there's only one PMIC on that board.
> 
> Thanks for the update!
> 
> As the tag condition from v1 is now fulfilled:
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Thanks, applied for v5.3.

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2019-05-16 11:09 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-05-15  8:23 [PATCH V2] ARM: dts: r8a779x: Configure PMIC IRQ pinmux marek.vasut
2019-05-15  8:32 ` Geert Uytterhoeven
2019-05-16 11:09   ` Simon Horman

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).