[PATCH v2 0/6] ov5647 driver improvement

[Roman Kovalivskyi <roman.kovalivskyi@globallogic.com>]

Driver for ov5647 camera sensor lacks some important functionality, such
as ability to query device format and resolution or operations with
power down mode. Patches from Raspberry kernel source tree[1] fixes
those issues and improves quality of mentioned driver.

Changes since v1 [2]:
* Added DT bindings documentation for PWDN GPIO and non-continuous clock mode
* Patch 2: "media: ov5647: Add support for PWDN GPIO."
  * Replaced msleep with usleep_range
* Patch 3: "media: ov5647: Add support for non-continuous clock mode"
  * Added check if bus type is correct one
  * Replaced storing of all flags to storing whether clock is continuous
  * Added of_node_put(np) in case if v4l2_fwnode_endpoint_parse fails

[1] - https://github.com/raspberrypi/linux
[2] - https://lore.kernel.org/patchwork/cover/1223179/

Dave Stevenson (5):
  media: ov5647: Add set_fmt and get_fmt calls.
  media: ov5647: Add support for PWDN GPIO.
  media: ov5647: Add support for non-continuous clock mode
  media: ov5647: Use gpiod_set_value_cansleep
  media: dt-bindings: ov5647: Add property for PWDN control

Roman Kovalivskyi (1):
  media: dt-bindings: ov5647: Add property for non-continuous clock

 .../devicetree/bindings/media/i2c/ov5647.txt  |  7 ++
 drivers/media/i2c/ov5647.c                    | 77 ++++++++++++++++++-
 2 files changed, 80 insertions(+), 4 deletions(-)

-- 
2.17.1