linux-riscv.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Yash Shah <yash.shah@sifive.com>
To: linux-edac@vger.kernel.org, linux-riscv@lists.infradead.org,
	palmer@sifive.com, bp@alien8.de, james.morse@arm.com
Cc: aou@eecs.berkeley.edu, paulmck@linux.ibm.com,
	gregkh@linuxfoundation.org, linux-kernel@vger.kernel.org,
	nicolas.ferre@microchip.com, sachin.ghadi@sifive.com,
	Yash Shah <yash.shah@sifive.com>,
	paul.walmsley@sifive.com, mchehab@kernel.org,
	davem@davemloft.net
Subject: [PATCH v2] edac: sifive: Add EDAC platform driver for SiFive SoCs
Date: Mon,  6 May 2019 16:57:06 +0530	[thread overview]
Message-ID: <1557142026-15949-2-git-send-email-yash.shah@sifive.com> (raw)
In-Reply-To: <1557142026-15949-1-git-send-email-yash.shah@sifive.com>

The initial ver of EDAC driver supports:
- ECC event monitoring and reporting through the EDAC framework for SiFive
  L2 cache controller.

The EDAC driver registers for notifier events from the L2 cache controller
driver (arch/riscv/mm/sifive_l2_cache.c) for L2 ECC events

Signed-off-by: Yash Shah <yash.shah@sifive.com>
Reviewed-by: James Morse <james.morse@arm.com>
---
This patch depends on patch
'RISC-V: sifive_l2_cache: Add L2 cache controller driver for SiFive SoCs'
https://lkml.org/lkml/2019/5/6/255

 MAINTAINERS                |   6 +++
 arch/riscv/Kconfig         |   1 +
 drivers/edac/Kconfig       |   6 +++
 drivers/edac/Makefile      |   1 +
 drivers/edac/sifive_edac.c | 119 +++++++++++++++++++++++++++++++++++++++++++++
 5 files changed, 133 insertions(+)
 create mode 100644 drivers/edac/sifive_edac.c

diff --git a/MAINTAINERS b/MAINTAINERS
index ba4f104..50f9f43 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5679,6 +5679,12 @@ L:	linux-edac@vger.kernel.org
 S:	Maintained
 F:	drivers/edac/sb_edac.c
 
+EDAC-SIFIVE
+M:	Yash Shah <yash.shah@sifive.com>
+L:	linux-edac@vger.kernel.org
+S:	Supported
+F:	drivers/edac/sifive_edac.c
+
 EDAC-SKYLAKE
 M:	Tony Luck <tony.luck@intel.com>
 L:	linux-edac@vger.kernel.org
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index eb56c82..31999a6 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -49,6 +49,7 @@ config RISCV
 	select GENERIC_IRQ_MULTI_HANDLER
 	select ARCH_HAS_PTE_SPECIAL
 	select HAVE_EBPF_JIT if 64BIT
+	select EDAC_SUPPORT
 
 config MMU
 	def_bool y
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index 47eb4d1..3e05228 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -460,6 +460,12 @@ config EDAC_ALTERA_SDMMC
 	  Support for error detection and correction on the
 	  Altera SDMMC FIFO Memory for Altera SoCs.
 
+config EDAC_SIFIVE
+	bool "Sifive platform EDAC driver"
+	depends on EDAC=y && RISCV
+	help
+	  Support for error detection and correction on the SiFive SoCs.
+
 config EDAC_SYNOPSYS
 	tristate "Synopsys DDR Memory Controller"
 	depends on ARCH_ZYNQ || ARCH_ZYNQMP
diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
index 89ad4a84..165ca65e 100644
--- a/drivers/edac/Makefile
+++ b/drivers/edac/Makefile
@@ -79,6 +79,7 @@ obj-$(CONFIG_EDAC_OCTEON_PCI)		+= octeon_edac-pci.o
 obj-$(CONFIG_EDAC_THUNDERX)		+= thunderx_edac.o
 
 obj-$(CONFIG_EDAC_ALTERA)		+= altera_edac.o
+obj-$(CONFIG_EDAC_SIFIVE)		+= sifive_edac.o
 obj-$(CONFIG_EDAC_SYNOPSYS)		+= synopsys_edac.o
 obj-$(CONFIG_EDAC_XGENE)		+= xgene_edac.o
 obj-$(CONFIG_EDAC_TI)			+= ti_edac.o
diff --git a/drivers/edac/sifive_edac.c b/drivers/edac/sifive_edac.c
new file mode 100644
index 0000000..413cdb4
--- /dev/null
+++ b/drivers/edac/sifive_edac.c
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SiFive Platform EDAC Driver
+ *
+ * Copyright (C) 2018-2019 SiFive, Inc.
+ *
+ * This driver is partially based on octeon_edac-pc.c
+ *
+ */
+#include <linux/edac.h>
+#include <linux/platform_device.h>
+#include "edac_module.h"
+#include <asm/sifive_l2_cache.h>
+
+#define DRVNAME "sifive_edac"
+
+struct sifive_edac_priv {
+	struct notifier_block notifier;
+	struct edac_device_ctl_info *dci;
+};
+
+/**
+ * EDAC error callback
+ *
+ * @event: non-zero if unrecoverable.
+ */
+static
+int ecc_err_event(struct notifier_block *this, unsigned long event, void *ptr)
+{
+	const char *msg = (char *)ptr;
+	struct sifive_edac_priv *p;
+
+	p = container_of(this, struct sifive_edac_priv, notifier);
+
+	if (event == SIFIVE_L2_ERR_TYPE_UE)
+		edac_device_handle_ue(p->dci, 0, 0, msg);
+	else if (event == SIFIVE_L2_ERR_TYPE_CE)
+		edac_device_handle_ce(p->dci, 0, 0, msg);
+
+	return NOTIFY_OK;
+}
+
+static int ecc_register(struct platform_device *pdev)
+{
+	struct sifive_edac_priv *p;
+
+	p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
+	if (!p)
+		return -ENOMEM;
+
+	p->notifier.notifier_call = ecc_err_event;
+	platform_set_drvdata(pdev, p);
+
+	p->dci = edac_device_alloc_ctl_info(0, "sifive_ecc", 1, "sifive_ecc",
+					    1, 1, NULL, 0,
+					    edac_device_alloc_index());
+	if (IS_ERR(p->dci))
+		return PTR_ERR(p->dci);
+
+	p->dci->dev = &pdev->dev;
+	p->dci->mod_name = "Sifive ECC Manager";
+	p->dci->ctl_name = dev_name(&pdev->dev);
+	p->dci->dev_name = dev_name(&pdev->dev);
+
+	if (edac_device_add_device(p->dci)) {
+		dev_err(p->dci->dev, "failed to register with EDAC core\n");
+		goto err;
+	}
+
+	register_sifive_l2_error_notifier(&p->notifier);
+
+	return 0;
+
+err:
+	edac_device_free_ctl_info(p->dci);
+
+	return -ENXIO;
+}
+
+static int ecc_unregister(struct platform_device *pdev)
+{
+	struct sifive_edac_priv *p = platform_get_drvdata(pdev);
+
+	unregister_sifive_l2_error_notifier(&p->notifier);
+	edac_device_del_device(&pdev->dev);
+	edac_device_free_ctl_info(p->dci);
+
+	return 0;
+}
+
+static struct platform_device *sifive_pdev;
+
+static int __init sifive_edac_init(void)
+{
+	int ret;
+
+	sifive_pdev = platform_device_register_simple(DRVNAME, 0, NULL, 0);
+	if (IS_ERR(sifive_pdev))
+		return PTR_ERR(sifive_pdev);
+
+	ret = ecc_register(sifive_pdev);
+	if (ret)
+		platform_device_unregister(sifive_pdev);
+
+	return ret;
+}
+
+static void __exit sifive_edac_exit(void)
+{
+	ecc_unregister(sifive_pdev);
+	platform_device_unregister(sifive_pdev);
+}
+
+module_init(sifive_edac_init);
+module_exit(sifive_edac_exit);
+
+MODULE_AUTHOR("SiFive Inc.");
+MODULE_DESCRIPTION("SiFive platform EDAC driver");
+MODULE_LICENSE("GPL v2");
-- 
1.9.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

  reply	other threads:[~2019-05-06 11:27 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-06 11:27 [PATCH v2] EDAC support for SiFive SoCs Yash Shah
2019-05-06 11:27 ` Yash Shah [this message]
2019-05-21  5:30   ` [PATCH v2] edac: sifive: Add EDAC platform driver " Yash Shah
2019-05-21 18:21     ` Borislav Petkov
2019-05-22  9:13       ` James Morse
2019-05-22  9:34         ` Boris Petkov
2019-06-07  6:43           ` Borislav Petkov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1557142026-15949-2-git-send-email-yash.shah@sifive.com \
    --to=yash.shah@sifive.com \
    --cc=aou@eecs.berkeley.edu \
    --cc=bp@alien8.de \
    --cc=davem@davemloft.net \
    --cc=gregkh@linuxfoundation.org \
    --cc=james.morse@arm.com \
    --cc=linux-edac@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=mchehab@kernel.org \
    --cc=nicolas.ferre@microchip.com \
    --cc=palmer@sifive.com \
    --cc=paul.walmsley@sifive.com \
    --cc=paulmck@linux.ibm.com \
    --cc=sachin.ghadi@sifive.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).