[GIT PULL] RISC-V patches for v5.2-rc6

* [GIT PULL] RISC-V patches for v5.2-rc6
@ 2019-06-17 15:54 Paul Walmsley
  2019-06-17 23:35 ` pr-tracker-bot
  0 siblings, 1 reply; 2+ messages in thread
From: Paul Walmsley @ 2019-06-17 15:54 UTC (permalink / raw)
  To: Linus Torvalds; +Cc: linux-riscv, linux-kernel

Linus,

The following changes since commit a188339ca5a396acc588e5851ed7e19f66b0ebd9:

  Linux 5.2-rc1 (2019-05-19 15:47:09 -0700)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux.git tags/riscv-for-v5.2/fixes-rc6

for you to fetch changes up to 259931fd3b96e4386b361b7f80c1d89b266234c8:

  riscv: remove unused barrier defines (2019-06-17 07:09:43 -0700)

----------------------------------------------------------------
RISC-V patches for v5.2-rc6

This tag contains fixes, defconfig, and DT data changes for the v5.2-rc
series.  The fixes are relatively straightforward:

- Addition of a TLB fence in the vmalloc_fault path, so the CPU doesn't
  enter an infinite page fault loop;
- Readdition of the pm_power_off export, so device drivers that
  reassign it can now be built as modules;
- A udelay() fix for RV32, fixing a miscomputation of the delay time;
- Removal of deprecated smp_mb__*() barriers.

The tag also adds initial DT data infrastructure for arch/riscv, along
with initial data for the SiFive FU540-C000 SoC and the corresponding
HiFive Unleashed board.

We also update the RV64 defconfig to include some core drivers for the
FU540 in the build.

----------------------------------------------------------------
Andreas Schwab (1):
      riscv: export pm_power_off again

Kevin Hilman (1):
      RISC-V: defconfig: enable clocks, serial console

Nick Hu (1):
      riscv: Fix udelay in RV32.

Paul Walmsley (5):
      arch: riscv: add support for building DTB files from DT source data
      dt-bindings: riscv: sifive: add YAML documentation for the SiFive FU540
      dt-bindings: riscv: convert cpu binding to json-schema
      riscv: dts: add initial support for the SiFive FU540-C000 SoC
      riscv: dts: add initial board data for the SiFive HiFive Unleashed

Rolf Eike Beer (1):
      riscv: remove unused barrier defines

ShihPo Hung (1):
      riscv: mm: synchronize MMU after pte change

 Documentation/devicetree/bindings/riscv/cpus.yaml  | 168 ++++++++++++++++
 .../devicetree/bindings/riscv/sifive.yaml          |  25 +++
 MAINTAINERS                                        |   9 +
 arch/riscv/boot/dts/Makefile                       |   2 +
 arch/riscv/boot/dts/sifive/Makefile                |   2 +
 arch/riscv/boot/dts/sifive/fu540-c000.dtsi         | 215 +++++++++++++++++++++
 .../riscv/boot/dts/sifive/hifive-unleashed-a00.dts |  65 +++++++
 arch/riscv/configs/defconfig                       |   4 +
 arch/riscv/include/asm/bitops.h                    |   5 -
 arch/riscv/kernel/reset.c                          |   1 +
 arch/riscv/lib/delay.c                             |   2 +-
 arch/riscv/mm/fault.c                              |  13 ++
 12 files changed, 505 insertions(+), 6 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/riscv/cpus.yaml
 create mode 100644 Documentation/devicetree/bindings/riscv/sifive.yaml
 create mode 100644 arch/riscv/boot/dts/Makefile
 create mode 100644 arch/riscv/boot/dts/sifive/Makefile
 create mode 100644 arch/riscv/boot/dts/sifive/fu540-c000.dtsi
 create mode 100644 arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply	[flat|nested] 2+ messages in thread