* [PATCH AUTOSEL 4.19 37/68] mtd: rawnand: qcom: Namespace prefix some commands [not found] <20181129055559.159228-1-sashal@kernel.org> @ 2018-11-29 5:55 ` Sasha Levin 2018-11-29 5:55 ` Sasha Levin 2018-11-29 5:55 ` [PATCH AUTOSEL 4.19 50/68] riscv: fix warning in arch/riscv/include/asm/module.h Sasha Levin 1 sibling, 1 reply; 4+ messages in thread From: Sasha Levin @ 2018-11-29 5:55 UTC (permalink / raw) To: linux-riscv From: Olof Johansson <olof@lixom.net> [ Upstream commit 33bf5519ae5dd356b182a94e3622f42860274a38 ] PAGE_READ is used by RISC-V arch code included through mm headers, and it makes sense to bring in a prefix on these in the driver. drivers/mtd/nand/raw/qcom_nandc.c:153: warning: "PAGE_READ" redefined #define PAGE_READ 0x2 In file included from include/linux/memremap.h:7, from include/linux/mm.h:27, from include/linux/scatterlist.h:8, from include/linux/dma-mapping.h:11, from drivers/mtd/nand/raw/qcom_nandc.c:17: arch/riscv/include/asm/pgtable.h:48: note: this is the location of the previous definition Caught by riscv allmodconfig. Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org> --- drivers/mtd/nand/raw/qcom_nandc.c | 32 +++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-) diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c index d1d470bb32e4..8815f3e2b718 100644 --- a/drivers/mtd/nand/raw/qcom_nandc.c +++ b/drivers/mtd/nand/raw/qcom_nandc.c @@ -151,15 +151,15 @@ #define NAND_VERSION_MINOR_SHIFT 16 /* NAND OP_CMDs */ -#define PAGE_READ 0x2 -#define PAGE_READ_WITH_ECC 0x3 -#define PAGE_READ_WITH_ECC_SPARE 0x4 -#define PROGRAM_PAGE 0x6 -#define PAGE_PROGRAM_WITH_ECC 0x7 -#define PROGRAM_PAGE_SPARE 0x9 -#define BLOCK_ERASE 0xa -#define FETCH_ID 0xb -#define RESET_DEVICE 0xd +#define OP_PAGE_READ 0x2 +#define OP_PAGE_READ_WITH_ECC 0x3 +#define OP_PAGE_READ_WITH_ECC_SPARE 0x4 +#define OP_PROGRAM_PAGE 0x6 +#define OP_PAGE_PROGRAM_WITH_ECC 0x7 +#define OP_PROGRAM_PAGE_SPARE 0x9 +#define OP_BLOCK_ERASE 0xa +#define OP_FETCH_ID 0xb +#define OP_RESET_DEVICE 0xd /* Default Value for NAND_DEV_CMD_VLD */ #define NAND_DEV_CMD_VLD_VAL (READ_START_VLD | WRITE_START_VLD | \ @@ -692,11 +692,11 @@ static void update_rw_regs(struct qcom_nand_host *host, int num_cw, bool read) if (read) { if (host->use_ecc) - cmd = PAGE_READ_WITH_ECC | PAGE_ACC | LAST_PAGE; + cmd = OP_PAGE_READ_WITH_ECC | PAGE_ACC | LAST_PAGE; else - cmd = PAGE_READ | PAGE_ACC | LAST_PAGE; + cmd = OP_PAGE_READ | PAGE_ACC | LAST_PAGE; } else { - cmd = PROGRAM_PAGE | PAGE_ACC | LAST_PAGE; + cmd = OP_PROGRAM_PAGE | PAGE_ACC | LAST_PAGE; } if (host->use_ecc) { @@ -1170,7 +1170,7 @@ static int nandc_param(struct qcom_nand_host *host) * in use. we configure the controller to perform a raw read of 512 * bytes to read onfi params */ - nandc_set_reg(nandc, NAND_FLASH_CMD, PAGE_READ | PAGE_ACC | LAST_PAGE); + nandc_set_reg(nandc, NAND_FLASH_CMD, OP_PAGE_READ | PAGE_ACC | LAST_PAGE); nandc_set_reg(nandc, NAND_ADDR0, 0); nandc_set_reg(nandc, NAND_ADDR1, 0); nandc_set_reg(nandc, NAND_DEV0_CFG0, 0 << CW_PER_PAGE @@ -1224,7 +1224,7 @@ static int erase_block(struct qcom_nand_host *host, int page_addr) struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip); nandc_set_reg(nandc, NAND_FLASH_CMD, - BLOCK_ERASE | PAGE_ACC | LAST_PAGE); + OP_BLOCK_ERASE | PAGE_ACC | LAST_PAGE); nandc_set_reg(nandc, NAND_ADDR0, page_addr); nandc_set_reg(nandc, NAND_ADDR1, 0); nandc_set_reg(nandc, NAND_DEV0_CFG0, @@ -1255,7 +1255,7 @@ static int read_id(struct qcom_nand_host *host, int column) if (column == -1) return 0; - nandc_set_reg(nandc, NAND_FLASH_CMD, FETCH_ID); + nandc_set_reg(nandc, NAND_FLASH_CMD, OP_FETCH_ID); nandc_set_reg(nandc, NAND_ADDR0, column); nandc_set_reg(nandc, NAND_ADDR1, 0); nandc_set_reg(nandc, NAND_FLASH_CHIP_SELECT, @@ -1276,7 +1276,7 @@ static int reset(struct qcom_nand_host *host) struct nand_chip *chip = &host->chip; struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip); - nandc_set_reg(nandc, NAND_FLASH_CMD, RESET_DEVICE); + nandc_set_reg(nandc, NAND_FLASH_CMD, OP_RESET_DEVICE); nandc_set_reg(nandc, NAND_EXEC_CMD, 1); write_reg_dma(nandc, NAND_FLASH_CMD, 1, NAND_BAM_NEXT_SGL); -- 2.17.1 ^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH AUTOSEL 4.19 37/68] mtd: rawnand: qcom: Namespace prefix some commands 2018-11-29 5:55 ` [PATCH AUTOSEL 4.19 37/68] mtd: rawnand: qcom: Namespace prefix some commands Sasha Levin @ 2018-11-29 5:55 ` Sasha Levin 0 siblings, 0 replies; 4+ messages in thread From: Sasha Levin @ 2018-11-29 5:55 UTC (permalink / raw) To: stable, linux-kernel Cc: Olof Johansson, Boris Brezillon, linux-riscv, linux-mtd, Sasha Levin From: Olof Johansson <olof@lixom.net> [ Upstream commit 33bf5519ae5dd356b182a94e3622f42860274a38 ] PAGE_READ is used by RISC-V arch code included through mm headers, and it makes sense to bring in a prefix on these in the driver. drivers/mtd/nand/raw/qcom_nandc.c:153: warning: "PAGE_READ" redefined #define PAGE_READ 0x2 In file included from include/linux/memremap.h:7, from include/linux/mm.h:27, from include/linux/scatterlist.h:8, from include/linux/dma-mapping.h:11, from drivers/mtd/nand/raw/qcom_nandc.c:17: arch/riscv/include/asm/pgtable.h:48: note: this is the location of the previous definition Caught by riscv allmodconfig. Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org> --- drivers/mtd/nand/raw/qcom_nandc.c | 32 +++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-) diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c index d1d470bb32e4..8815f3e2b718 100644 --- a/drivers/mtd/nand/raw/qcom_nandc.c +++ b/drivers/mtd/nand/raw/qcom_nandc.c @@ -151,15 +151,15 @@ #define NAND_VERSION_MINOR_SHIFT 16 /* NAND OP_CMDs */ -#define PAGE_READ 0x2 -#define PAGE_READ_WITH_ECC 0x3 -#define PAGE_READ_WITH_ECC_SPARE 0x4 -#define PROGRAM_PAGE 0x6 -#define PAGE_PROGRAM_WITH_ECC 0x7 -#define PROGRAM_PAGE_SPARE 0x9 -#define BLOCK_ERASE 0xa -#define FETCH_ID 0xb -#define RESET_DEVICE 0xd +#define OP_PAGE_READ 0x2 +#define OP_PAGE_READ_WITH_ECC 0x3 +#define OP_PAGE_READ_WITH_ECC_SPARE 0x4 +#define OP_PROGRAM_PAGE 0x6 +#define OP_PAGE_PROGRAM_WITH_ECC 0x7 +#define OP_PROGRAM_PAGE_SPARE 0x9 +#define OP_BLOCK_ERASE 0xa +#define OP_FETCH_ID 0xb +#define OP_RESET_DEVICE 0xd /* Default Value for NAND_DEV_CMD_VLD */ #define NAND_DEV_CMD_VLD_VAL (READ_START_VLD | WRITE_START_VLD | \ @@ -692,11 +692,11 @@ static void update_rw_regs(struct qcom_nand_host *host, int num_cw, bool read) if (read) { if (host->use_ecc) - cmd = PAGE_READ_WITH_ECC | PAGE_ACC | LAST_PAGE; + cmd = OP_PAGE_READ_WITH_ECC | PAGE_ACC | LAST_PAGE; else - cmd = PAGE_READ | PAGE_ACC | LAST_PAGE; + cmd = OP_PAGE_READ | PAGE_ACC | LAST_PAGE; } else { - cmd = PROGRAM_PAGE | PAGE_ACC | LAST_PAGE; + cmd = OP_PROGRAM_PAGE | PAGE_ACC | LAST_PAGE; } if (host->use_ecc) { @@ -1170,7 +1170,7 @@ static int nandc_param(struct qcom_nand_host *host) * in use. we configure the controller to perform a raw read of 512 * bytes to read onfi params */ - nandc_set_reg(nandc, NAND_FLASH_CMD, PAGE_READ | PAGE_ACC | LAST_PAGE); + nandc_set_reg(nandc, NAND_FLASH_CMD, OP_PAGE_READ | PAGE_ACC | LAST_PAGE); nandc_set_reg(nandc, NAND_ADDR0, 0); nandc_set_reg(nandc, NAND_ADDR1, 0); nandc_set_reg(nandc, NAND_DEV0_CFG0, 0 << CW_PER_PAGE @@ -1224,7 +1224,7 @@ static int erase_block(struct qcom_nand_host *host, int page_addr) struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip); nandc_set_reg(nandc, NAND_FLASH_CMD, - BLOCK_ERASE | PAGE_ACC | LAST_PAGE); + OP_BLOCK_ERASE | PAGE_ACC | LAST_PAGE); nandc_set_reg(nandc, NAND_ADDR0, page_addr); nandc_set_reg(nandc, NAND_ADDR1, 0); nandc_set_reg(nandc, NAND_DEV0_CFG0, @@ -1255,7 +1255,7 @@ static int read_id(struct qcom_nand_host *host, int column) if (column == -1) return 0; - nandc_set_reg(nandc, NAND_FLASH_CMD, FETCH_ID); + nandc_set_reg(nandc, NAND_FLASH_CMD, OP_FETCH_ID); nandc_set_reg(nandc, NAND_ADDR0, column); nandc_set_reg(nandc, NAND_ADDR1, 0); nandc_set_reg(nandc, NAND_FLASH_CHIP_SELECT, @@ -1276,7 +1276,7 @@ static int reset(struct qcom_nand_host *host) struct nand_chip *chip = &host->chip; struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip); - nandc_set_reg(nandc, NAND_FLASH_CMD, RESET_DEVICE); + nandc_set_reg(nandc, NAND_FLASH_CMD, OP_RESET_DEVICE); nandc_set_reg(nandc, NAND_EXEC_CMD, 1); write_reg_dma(nandc, NAND_FLASH_CMD, 1, NAND_BAM_NEXT_SGL); -- 2.17.1 _______________________________________________ linux-riscv mailing list linux-riscv@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-riscv ^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH AUTOSEL 4.19 50/68] riscv: fix warning in arch/riscv/include/asm/module.h [not found] <20181129055559.159228-1-sashal@kernel.org> 2018-11-29 5:55 ` [PATCH AUTOSEL 4.19 37/68] mtd: rawnand: qcom: Namespace prefix some commands Sasha Levin @ 2018-11-29 5:55 ` Sasha Levin 2018-11-29 5:55 ` Sasha Levin 1 sibling, 1 reply; 4+ messages in thread From: Sasha Levin @ 2018-11-29 5:55 UTC (permalink / raw) To: linux-riscv From: David Abdurachmanov <david.abdurachmanov@gmail.com> [ Upstream commit 0138ebb90c633f76bc71617f8f23635ce41c84fd ] Fixes warning: 'struct module' declared inside parameter list will not be visible outside of this definition or declaration Signed-off-by: David Abdurachmanov <david.abdurachmanov@gmail.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Sasha Levin <sashal@kernel.org> --- arch/riscv/include/asm/module.h | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/riscv/include/asm/module.h b/arch/riscv/include/asm/module.h index 349df33808c4..cd2af4b013e3 100644 --- a/arch/riscv/include/asm/module.h +++ b/arch/riscv/include/asm/module.h @@ -8,6 +8,7 @@ #define MODULE_ARCH_VERMAGIC "riscv" +struct module; u64 module_emit_got_entry(struct module *mod, u64 val); u64 module_emit_plt_entry(struct module *mod, u64 val); -- 2.17.1 ^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH AUTOSEL 4.19 50/68] riscv: fix warning in arch/riscv/include/asm/module.h 2018-11-29 5:55 ` [PATCH AUTOSEL 4.19 50/68] riscv: fix warning in arch/riscv/include/asm/module.h Sasha Levin @ 2018-11-29 5:55 ` Sasha Levin 0 siblings, 0 replies; 4+ messages in thread From: Sasha Levin @ 2018-11-29 5:55 UTC (permalink / raw) To: stable, linux-kernel Cc: Sasha Levin, linux-riscv, Palmer Dabbelt, David Abdurachmanov From: David Abdurachmanov <david.abdurachmanov@gmail.com> [ Upstream commit 0138ebb90c633f76bc71617f8f23635ce41c84fd ] Fixes warning: 'struct module' declared inside parameter list will not be visible outside of this definition or declaration Signed-off-by: David Abdurachmanov <david.abdurachmanov@gmail.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Sasha Levin <sashal@kernel.org> --- arch/riscv/include/asm/module.h | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/riscv/include/asm/module.h b/arch/riscv/include/asm/module.h index 349df33808c4..cd2af4b013e3 100644 --- a/arch/riscv/include/asm/module.h +++ b/arch/riscv/include/asm/module.h @@ -8,6 +8,7 @@ #define MODULE_ARCH_VERMAGIC "riscv" +struct module; u64 module_emit_got_entry(struct module *mod, u64 val); u64 module_emit_plt_entry(struct module *mod, u64 val); -- 2.17.1 _______________________________________________ linux-riscv mailing list linux-riscv@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-riscv ^ permalink raw reply related [flat|nested] 4+ messages in thread
end of thread, other threads:[~2018-11-29 6:00 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <20181129055559.159228-1-sashal@kernel.org>
2018-11-29 5:55 ` [PATCH AUTOSEL 4.19 37/68] mtd: rawnand: qcom: Namespace prefix some commands Sasha Levin
2018-11-29 5:55 ` Sasha Levin
2018-11-29 5:55 ` [PATCH AUTOSEL 4.19 50/68] riscv: fix warning in arch/riscv/include/asm/module.h Sasha Levin
2018-11-29 5:55 ` Sasha Levin
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).