Linux-RISC-V Archive on lore.kernel.org
 help / Atom feed
From: Anup Patel <Anup.Patel@wdc.com>
To: Palmer Dabbelt <palmer@sifive.com>, Albert Ou <aou@eecs.berkeley.edu>
Cc: Anup Patel <Anup.Patel@wdc.com>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	Christoph Hellwig <hch@infradead.org>,
	Atish Patra <Atish.Patra@wdc.com>,
	Paul Walmsley <paul.walmsley@sifive.com>,
	"linux-riscv@lists.infradead.org"
	<linux-riscv@lists.infradead.org>
Subject: [PATCH v3 3/6] RISC-V: Move setup_bootmem() to mm/init.c
Date: Tue, 12 Feb 2019 14:00:26 +0000
Message-ID: <20190212135942.105008-4-anup.patel@wdc.com> (raw)
In-Reply-To: <20190212135942.105008-1-anup.patel@wdc.com>

The setup_bootmem() mainly populates memblocks and does early memory
reservations. The right location for this function is mm/init.c.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
---
 arch/riscv/include/asm/pgtable.h |  1 +
 arch/riscv/kernel/setup.c        | 48 ++++----------------------------
 arch/riscv/mm/init.c             | 40 ++++++++++++++++++++++++++
 3 files changed, 46 insertions(+), 43 deletions(-)

diff --git a/arch/riscv/include/asm/pgtable.h b/arch/riscv/include/asm/pgtable.h
index 16301966d65b..35893810cba3 100644
--- a/arch/riscv/include/asm/pgtable.h
+++ b/arch/riscv/include/asm/pgtable.h
@@ -404,6 +404,7 @@ static inline int ptep_clear_flush_young(struct vm_area_struct *vma,
 #define kern_addr_valid(addr)   (1) /* FIXME */
 #endif
 
+extern void setup_bootmem(void);
 extern void paging_init(void);
 
 static inline void pgtable_cache_init(void)
diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
index 9e6395b7d409..ab29a66a17fc 100644
--- a/arch/riscv/kernel/setup.c
+++ b/arch/riscv/kernel/setup.c
@@ -163,49 +163,6 @@ void __init parse_dtb(unsigned int hartid, void *dtb)
 #endif
 }
 
-static void __init setup_bootmem(void)
-{
-	struct memblock_region *reg;
-	phys_addr_t mem_size = 0;
-
-	/* Find the memory region containing the kernel */
-	for_each_memblock(memory, reg) {
-		phys_addr_t vmlinux_end = __pa(_end);
-		phys_addr_t end = reg->base + reg->size;
-
-		if (reg->base <= vmlinux_end && vmlinux_end <= end) {
-			/*
-			 * Reserve from the start of the region to the end of
-			 * the kernel
-			 */
-			memblock_reserve(reg->base, vmlinux_end - reg->base);
-			mem_size = min(reg->size, (phys_addr_t)-PAGE_OFFSET);
-		}
-	}
-	BUG_ON(mem_size == 0);
-
-	set_max_mapnr(PFN_DOWN(mem_size));
-	max_low_pfn = PFN_DOWN(memblock_end_of_DRAM());
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	setup_initrd();
-#endif /* CONFIG_BLK_DEV_INITRD */
-
-	early_init_fdt_reserve_self();
-	early_init_fdt_scan_reserved_mem();
-	memblock_allow_resize();
-	memblock_dump_all();
-
-	for_each_memblock(memory, reg) {
-		unsigned long start_pfn = memblock_region_memory_base_pfn(reg);
-		unsigned long end_pfn = memblock_region_memory_end_pfn(reg);
-
-		memblock_set_node(PFN_PHYS(start_pfn),
-		                  PFN_PHYS(end_pfn - start_pfn),
-		                  &memblock.memory, 0);
-	}
-}
-
 void __init setup_arch(char **cmdline_p)
 {
 	init_mm.start_code = (unsigned long) _stext;
@@ -218,6 +175,11 @@ void __init setup_arch(char **cmdline_p)
 	parse_early_param();
 
 	setup_bootmem();
+
+#ifdef CONFIG_BLK_DEV_INITRD
+	setup_initrd();
+#endif /* CONFIG_BLK_DEV_INITRD */
+
 	paging_init();
 	unflatten_device_tree();
 
diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
index 504a5e491f5a..a57dba8ac9e7 100644
--- a/arch/riscv/mm/init.c
+++ b/arch/riscv/mm/init.c
@@ -16,6 +16,7 @@
 #include <linux/memblock.h>
 #include <linux/swap.h>
 #include <linux/sizes.h>
+#include <linux/of_fdt.h>
 
 #include <asm/tlbflush.h>
 #include <asm/sections.h>
@@ -63,3 +64,42 @@ void free_initmem(void)
 {
 	free_initmem_default(0);
 }
+
+void __init setup_bootmem(void)
+{
+	struct memblock_region *reg;
+	phys_addr_t mem_size = 0;
+
+	/* Find the memory region containing the kernel */
+	for_each_memblock(memory, reg) {
+		phys_addr_t vmlinux_end = __pa(_end);
+		phys_addr_t end = reg->base + reg->size;
+
+		if (reg->base <= vmlinux_end && vmlinux_end <= end) {
+			/*
+			 * Reserve from the start of the region to the end of
+			 * the kernel
+			 */
+			memblock_reserve(reg->base, vmlinux_end - reg->base);
+			mem_size = min(reg->size, (phys_addr_t)-PAGE_OFFSET);
+		}
+	}
+	BUG_ON(mem_size == 0);
+
+	set_max_mapnr(PFN_DOWN(mem_size));
+	max_low_pfn = memblock_end_of_DRAM();
+
+	early_init_fdt_reserve_self();
+	early_init_fdt_scan_reserved_mem();
+	memblock_allow_resize();
+	memblock_dump_all();
+
+	for_each_memblock(memory, reg) {
+		unsigned long start_pfn = memblock_region_memory_base_pfn(reg);
+		unsigned long end_pfn = memblock_region_memory_end_pfn(reg);
+
+		memblock_set_node(PFN_PHYS(start_pfn),
+				  PFN_PHYS(end_pfn - start_pfn),
+				  &memblock.memory, 0);
+	}
+}
-- 
2.17.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

  parent reply index

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-12 14:00 [PATCH v3 0/6] Fixmap support and MM cleanups Anup Patel
2019-02-12 14:00 ` [PATCH v3 1/6] RISC-V: Move free_initrd_mem() to kernel/setup.c Anup Patel
2019-02-12 14:00 ` [PATCH v3 2/6] RISC-V: Setup init_mm before parse_early_param() Anup Patel
2019-02-12 14:00 ` Anup Patel [this message]
2019-02-12 14:00 ` [PATCH v3 4/6] RISC-V: Move setup_vm() to mm/init.c Anup Patel
2019-02-12 14:00 ` [PATCH v3 5/6] RISC-V: Implement compile-time fixed mappings Anup Patel
2019-02-12 14:01 ` [PATCH v3 6/6] RISC-V: Implement keepinitrd kernel parameter Anup Patel
2019-02-12 14:07   ` Andreas Schwab

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190212135942.105008-4-anup.patel@wdc.com \
    --to=anup.patel@wdc.com \
    --cc=Atish.Patra@wdc.com \
    --cc=aou@eecs.berkeley.edu \
    --cc=hch@infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=palmer@sifive.com \
    --cc=paul.walmsley@sifive.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-RISC-V Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-riscv/0 linux-riscv/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-riscv linux-riscv/ https://lore.kernel.org/linux-riscv \
		linux-riscv@lists.infradead.org infradead-linux-riscv@archiver.kernel.org
	public-inbox-index linux-riscv


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-riscv


AGPL code for this site: git clone https://public-inbox.org/ public-inbox