* [PATCH v2] PCI/MSI: Enable PCI_MSI_IRQ_DOMAIN support for Microblaze @ 2019-10-08 12:58 Michal Simek 2019-10-08 15:46 ` Christoph Hellwig 0 siblings, 1 reply; 5+ messages in thread From: Michal Simek @ 2019-10-08 12:58 UTC (permalink / raw) To: linux-kernel, monstr, michal.simek, git Cc: Kuldeep Dave, Albert Ou, Bharat Kumar Gogada, Greg Kroah-Hartman, Palmer Dabbelt, linux-pci, Masahiro Yamada, Firoz Khan, Paul Walmsley, Bjorn Helgaas, linux-riscv, Will Deacon From: Kuldeep Dave <kuldeep.dave@xilinx.com> Add Microblaze as an arch that supports PCI_MSI_IRQ_DOMAIN and add generation of msi.h in the Microblaze arch. The same change has been done by commit 251a44888183 ("riscv: include generic support for MSI irqdomains") and by commit 2a9af0273c1c ("PCI/MSI: Enable PCI_MSI_IRQ_DOMAIN support for RISC-V"). Signed-off-by: Kuldeep Dave <kuldeep.dave@xilinx.com> Signed-off-by: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> --- Changes in v2: - Squash patches together https://lkml.org/lkml/2019/10/8/277 https://lkml.org/lkml/2019/10/8/283 Please take it directly via pci tree. --- arch/microblaze/include/asm/Kbuild | 1 + drivers/pci/Kconfig | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/microblaze/include/asm/Kbuild b/arch/microblaze/include/asm/Kbuild index e5c9170a07fc..83417105c00a 100644 --- a/arch/microblaze/include/asm/Kbuild +++ b/arch/microblaze/include/asm/Kbuild @@ -25,6 +25,7 @@ generic-y += local64.h generic-y += mcs_spinlock.h generic-y += mm-arch-hooks.h generic-y += mmiowb.h +generic-y += msi.h generic-y += parport.h generic-y += percpu.h generic-y += preempt.h diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig index a304f5ea11b9..9d259372fbfd 100644 --- a/drivers/pci/Kconfig +++ b/drivers/pci/Kconfig @@ -52,7 +52,7 @@ config PCI_MSI If you don't know what to do here, say Y. config PCI_MSI_IRQ_DOMAIN - def_bool ARC || ARM || ARM64 || X86 || RISCV + def_bool ARC || ARM || ARM64 || X86 || RISCV || MICROBLAZE depends on PCI_MSI select GENERIC_MSI_IRQ_DOMAIN -- 2.17.1 _______________________________________________ linux-riscv mailing list linux-riscv@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-riscv ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v2] PCI/MSI: Enable PCI_MSI_IRQ_DOMAIN support for Microblaze 2019-10-08 12:58 [PATCH v2] PCI/MSI: Enable PCI_MSI_IRQ_DOMAIN support for Microblaze Michal Simek @ 2019-10-08 15:46 ` Christoph Hellwig 2019-10-14 23:23 ` Bjorn Helgaas 0 siblings, 1 reply; 5+ messages in thread From: Christoph Hellwig @ 2019-10-08 15:46 UTC (permalink / raw) To: Michal Simek Cc: Kuldeep Dave, Albert Ou, Bharat Kumar Gogada, Greg Kroah-Hartman, Palmer Dabbelt, monstr, linux-kernel, Masahiro Yamada, Firoz Khan, git, Paul Walmsley, linux-pci, Bjorn Helgaas, linux-riscv, Will Deacon > diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig > index a304f5ea11b9..9d259372fbfd 100644 > --- a/drivers/pci/Kconfig > +++ b/drivers/pci/Kconfig > @@ -52,7 +52,7 @@ config PCI_MSI > If you don't know what to do here, say Y. > > config PCI_MSI_IRQ_DOMAIN > - def_bool ARC || ARM || ARM64 || X86 || RISCV > + def_bool ARC || ARM || ARM64 || X86 || RISCV || MICROBLAZE Can you find out what the actual dependency is so that we can automatically enabled this instead of the weird arch list? _______________________________________________ linux-riscv mailing list linux-riscv@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-riscv ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v2] PCI/MSI: Enable PCI_MSI_IRQ_DOMAIN support for Microblaze 2019-10-08 15:46 ` Christoph Hellwig @ 2019-10-14 23:23 ` Bjorn Helgaas 2019-10-15 5:59 ` Michal Simek 0 siblings, 1 reply; 5+ messages in thread From: Bjorn Helgaas @ 2019-10-14 23:23 UTC (permalink / raw) To: Christoph Hellwig Cc: Kuldeep Dave, Albert Ou, Bharat Kumar Gogada, linux-kernel, Palmer Dabbelt, linux-pci, monstr, Michal Simek, Masahiro Yamada, Firoz Khan, git, Paul Walmsley, Greg Kroah-Hartman, linux-riscv, Will Deacon On Tue, Oct 08, 2019 at 08:46:52AM -0700, Christoph Hellwig wrote: > > diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig > > index a304f5ea11b9..9d259372fbfd 100644 > > --- a/drivers/pci/Kconfig > > +++ b/drivers/pci/Kconfig > > @@ -52,7 +52,7 @@ config PCI_MSI > > If you don't know what to do here, say Y. > > > > config PCI_MSI_IRQ_DOMAIN > > - def_bool ARC || ARM || ARM64 || X86 || RISCV > > + def_bool ARC || ARM || ARM64 || X86 || RISCV || MICROBLAZE > > Can you find out what the actual dependency is so that we can > automatically enabled this instead of the weird arch list? Hi Michal, I'll wait for your response on whether it's feasible to do something smarter than listing every arch here. Please ping here or post a v3; since I marked this patch "Changed Requested" in patchwork, it's fallen off my to-do list. Bjorn _______________________________________________ linux-riscv mailing list linux-riscv@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-riscv ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v2] PCI/MSI: Enable PCI_MSI_IRQ_DOMAIN support for Microblaze 2019-10-14 23:23 ` Bjorn Helgaas @ 2019-10-15 5:59 ` Michal Simek 2019-10-16 23:57 ` Palmer Dabbelt 0 siblings, 1 reply; 5+ messages in thread From: Michal Simek @ 2019-10-15 5:59 UTC (permalink / raw) To: Bjorn Helgaas, Christoph Hellwig Cc: Kuldeep Dave, Albert Ou, Bharat Kumar Gogada, linux-kernel, Palmer Dabbelt, linux-pci, monstr, Michal Simek, Masahiro Yamada, Firoz Khan, git, Paul Walmsley, Greg Kroah-Hartman, linux-riscv, Will Deacon Hi Bjorn, On 15. 10. 19 1:23, Bjorn Helgaas wrote: > On Tue, Oct 08, 2019 at 08:46:52AM -0700, Christoph Hellwig wrote: >>> diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig >>> index a304f5ea11b9..9d259372fbfd 100644 >>> --- a/drivers/pci/Kconfig >>> +++ b/drivers/pci/Kconfig >>> @@ -52,7 +52,7 @@ config PCI_MSI >>> If you don't know what to do here, say Y. >>> >>> config PCI_MSI_IRQ_DOMAIN >>> - def_bool ARC || ARM || ARM64 || X86 || RISCV >>> + def_bool ARC || ARM || ARM64 || X86 || RISCV || MICROBLAZE >> >> Can you find out what the actual dependency is so that we can >> automatically enabled this instead of the weird arch list? > > Hi Michal, I'll wait for your response on whether it's feasible to do > something smarter than listing every arch here. Please ping here or > post a v3; since I marked this patch "Changed Requested" in patchwork, > it's fallen off my to-do list. I was waiting more for you to comment this. I was expecting that the same question came last time when RISCV was added. I am happy to investigate more about it but definitely some your input would help. Thanks, Michal _______________________________________________ linux-riscv mailing list linux-riscv@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-riscv ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v2] PCI/MSI: Enable PCI_MSI_IRQ_DOMAIN support for Microblaze 2019-10-15 5:59 ` Michal Simek @ 2019-10-16 23:57 ` Palmer Dabbelt 0 siblings, 0 replies; 5+ messages in thread From: Palmer Dabbelt @ 2019-10-16 23:57 UTC (permalink / raw) To: Christoph Hellwig, michal.simek Cc: monstr, aou, bharat.kumar.gogada, Greg KH, Paul Walmsley, michal.simek, linux-kernel, Christoph Hellwig, yamada.masahiro, firoz.khan, helgaas, git, linux-pci, kuldeep.dave, linux-riscv, will On Mon, 14 Oct 2019 22:59:07 PDT (-0700), michal.simek@xilinx.com wrote: > Hi Bjorn, > > On 15. 10. 19 1:23, Bjorn Helgaas wrote: >> On Tue, Oct 08, 2019 at 08:46:52AM -0700, Christoph Hellwig wrote: >>>> diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig >>>> index a304f5ea11b9..9d259372fbfd 100644 >>>> --- a/drivers/pci/Kconfig >>>> +++ b/drivers/pci/Kconfig >>>> @@ -52,7 +52,7 @@ config PCI_MSI >>>> If you don't know what to do here, say Y. >>>> >>>> config PCI_MSI_IRQ_DOMAIN >>>> - def_bool ARC || ARM || ARM64 || X86 || RISCV >>>> + def_bool ARC || ARM || ARM64 || X86 || RISCV || MICROBLAZE >>> >>> Can you find out what the actual dependency is so that we can >>> automatically enabled this instead of the weird arch list? >> >> Hi Michal, I'll wait for your response on whether it's feasible to do >> something smarter than listing every arch here. Please ping here or >> post a v3; since I marked this patch "Changed Requested" in patchwork, >> it's fallen off my to-do list. > > I was waiting more for you to comment this. I was expecting that the > same question came last time when RISCV was added. > I am happy to investigate more about it but definitely some your input > would help. Sorry: we usually try to do things the right way but it looks like this got lost in the shuffle. It really doesn't look like there's any architecture-specific code implementation on our end: commit 251a44888183003b0380df184835a2c00bfa39d7 Author: Wesley Terpstra <wesley@sifive.com> Date: Mon May 20 10:29:26 2019 -0700 riscv: include generic support for MSI irqdomains Some RISC-V systems include PCIe host controllers that support PCIe message-signaled interrupts. For this to work on Linux, we need to enable PCI_MSI_IRQ_DOMAIN and define struct msi_alloc_info. Support for the latter is enabled by including the architecture-generic msi.h include. Signed-off-by: Wesley Terpstra <wesley@sifive.com> [paul.walmsley@sifive.com: split initial patch into one arch/riscv patch and one drivers/pci patch] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> diff --git a/arch/riscv/include/asm/Kbuild b/arch/riscv/include/asm/Kbuild index 1efaeddf1e4b..16970f246860 100644 --- a/arch/riscv/include/asm/Kbuild +++ b/arch/riscv/include/asm/Kbuild @@ -22,6 +22,7 @@ generic-y += kvm_para.h generic-y += local.h generic-y += local64.h generic-y += mm-arch-hooks.h +generic-y += msi.h generic-y += percpu.h generic-y += preempt.h generic-y += sections.h I bet that dropping the architectures and adding msi.h everywhere it's not listed will at least get this building. I'll give diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig index a304f5ea11b9..77c1428cd945 100644 --- a/drivers/pci/Kconfig +++ b/drivers/pci/Kconfig @@ -52,7 +52,7 @@ config PCI_MSI If you don't know what to do here, say Y. config PCI_MSI_IRQ_DOMAIN - def_bool ARC || ARM || ARM64 || X86 || RISCV + def_bool y depends on PCI_MSI select GENERIC_MSI_IRQ_DOMAIN a build everywhere to see what falls out. _______________________________________________ linux-riscv mailing list linux-riscv@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-riscv ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2019-10-16 23:58 UTC | newest] Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2019-10-08 12:58 [PATCH v2] PCI/MSI: Enable PCI_MSI_IRQ_DOMAIN support for Microblaze Michal Simek 2019-10-08 15:46 ` Christoph Hellwig 2019-10-14 23:23 ` Bjorn Helgaas 2019-10-15 5:59 ` Michal Simek 2019-10-16 23:57 ` Palmer Dabbelt
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).