[PATCH AUTOSEL 5.7 11/25] riscv: kasan: use local_tlb_flush_all() to avoid uninitialized __sbi_rfence

[PATCH AUTOSEL 5.7 11/25] riscv: kasan: use local_tlb_flush_all() to avoid uninitialized __sbi_rfence

[Sasha Levin]

From: Vincent Chen <vincent.chen@sifive.com>

[ Upstream commit 4cb699d0447be8e0906539f93cbe41e19598ee5a ]

It fails to boot the v5.8-rc4 kernel with CONFIG_KASAN because kasan_init
and kasan_early_init use uninitialized __sbi_rfence as executing the
tlb_flush_all(). Actually, at this moment, only the CPU which is
responsible for the system initialization enables the MMU. Other CPUs are
parking at the .Lsecondary_start. Hence the tlb_flush_all() is able to be
replaced by local_tlb_flush_all() to avoid using uninitialized
__sbi_rfence.

Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/riscv/mm/kasan_init.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/riscv/mm/kasan_init.c b/arch/riscv/mm/kasan_init.c
index ec0ca90dd9000..7a580c8ad6034 100644
--- a/arch/riscv/mm/kasan_init.c
+++ b/arch/riscv/mm/kasan_init.c
@@ -44,7 +44,7 @@ asmlinkage void __init kasan_early_init(void)
 				(__pa(((uintptr_t) kasan_early_shadow_pmd))),
 				__pgprot(_PAGE_TABLE)));
 
-	flush_tlb_all();
+	local_flush_tlb_all();
 }
 
 static void __init populate(void *start, void *end)
@@ -79,7 +79,7 @@ static void __init populate(void *start, void *end)
 			pfn_pgd(PFN_DOWN(__pa(&pmd[offset])),
 				__pgprot(_PAGE_TABLE)));
 
-	flush_tlb_all();
+	local_flush_tlb_all();
 	memset(start, 0, end - start);
 }
 
-- 
2.25.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH AUTOSEL 5.7 23/25] RISC-V: Set maximum number of mapped pages correctly

[Sasha Levin]

From: Atish Patra <atish.patra@wdc.com>

[ Upstream commit d0d8aae64566b753c4330fbd5944b88af035f299 ]

Currently, maximum number of mapper pages are set to the pfn calculated
from the memblock size of the memblock containing kernel. This will work
until that memblock spans the entire memory. However, it will be set to
a wrong value if there are multiple memblocks defined in kernel
(e.g. with efi runtime services).

Set the the maximum value to the pfn calculated from dram size.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/riscv/mm/init.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
index fdc772f57edc3..753f2cdbeab8f 100644
--- a/arch/riscv/mm/init.c
+++ b/arch/riscv/mm/init.c
@@ -149,9 +149,9 @@ void __init setup_bootmem(void)
 	/* Reserve from the start of the kernel to the end of the kernel */
 	memblock_reserve(vmlinux_start, vmlinux_end - vmlinux_start);
 
-	set_max_mapnr(PFN_DOWN(mem_size));
 	max_pfn = PFN_DOWN(memblock_end_of_DRAM());
 	max_low_pfn = max_pfn;
+	set_max_mapnr(max_low_pfn);
 
 #ifdef CONFIG_BLK_DEV_INITRD
 	setup_initrd();
-- 
2.25.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH AUTOSEL 5.7 25/25] riscv: Parse all memory blocks to remove unusable memory

[Sasha Levin]

From: Atish Patra <atish.patra@wdc.com>

[ Upstream commit fa5a198359053c8e21dcc2b39c0e13871059bc9f ]

Currently, maximum physical memory allowed is equal to -PAGE_OFFSET.
That's why we remove any memory blocks spanning beyond that size. However,
it is done only for memblock containing linux kernel which will not work
if there are multiple memblocks.

Process all memory blocks to figure out how much memory needs to be removed
and remove at the end instead of updating the memblock list in place.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/riscv/mm/init.c | 31 +++++++++++++++++--------------
 1 file changed, 17 insertions(+), 14 deletions(-)

diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
index 753f2cdbeab8f..5e3dccf74ca92 100644
--- a/arch/riscv/mm/init.c
+++ b/arch/riscv/mm/init.c
@@ -125,26 +125,29 @@ void __init setup_bootmem(void)
 {
 	struct memblock_region *reg;
 	phys_addr_t mem_size = 0;
+	phys_addr_t total_mem = 0;
+	phys_addr_t mem_start, end = 0;
 	phys_addr_t vmlinux_end = __pa_symbol(&_end);
 	phys_addr_t vmlinux_start = __pa_symbol(&_start);
 
 	/* Find the memory region containing the kernel */
 	for_each_memblock(memory, reg) {
-		phys_addr_t end = reg->base + reg->size;
-
-		if (reg->base <= vmlinux_start && vmlinux_end <= end) {
-			mem_size = min(reg->size, (phys_addr_t)-PAGE_OFFSET);
-
-			/*
-			 * Remove memblock from the end of usable area to the
-			 * end of region
-			 */
-			if (reg->base + mem_size < end)
-				memblock_remove(reg->base + mem_size,
-						end - reg->base - mem_size);
-		}
+		end = reg->base + reg->size;
+		if (!total_mem)
+			mem_start = reg->base;
+		if (reg->base <= vmlinux_start && vmlinux_end <= end)
+			BUG_ON(reg->size == 0);
+		total_mem = total_mem + reg->size;
 	}
-	BUG_ON(mem_size == 0);
+
+	/*
+	 * Remove memblock from the end of usable area to the
+	 * end of region
+	 */
+	mem_size = min(total_mem, (phys_addr_t)-PAGE_OFFSET);
+	if (mem_start + mem_size < end)
+		memblock_remove(mem_start + mem_size,
+				end - mem_start - mem_size);
 
 	/* Reserve from the start of the kernel to the end of the kernel */
 	memblock_reserve(vmlinux_start, vmlinux_end - vmlinux_start);
-- 
2.25.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv