From: Anup Patel <anup@brainfault.org>
To: Christoph Hellwig <hch@lst.de>
Cc: "linux-kernel@vger.kernel.org List"
<linux-kernel@vger.kernel.org>,
Damien Le Moal <damien.lemoal@wdc.com>,
Palmer Dabbelt <palmer@sifive.com>,
linux-riscv <linux-riscv@lists.infradead.org>,
Paul Walmsley <paul.walmsley@sifive.com>
Subject: Re: [PATCH 08/15] riscv: add support for MMIO access to the timer registers
Date: Fri, 18 Oct 2019 08:27:36 +0530 [thread overview]
Message-ID: <CAAhSdy2Ln1H4hSbjSt30pZQpHRiP5G2rJffDXFDS6TbvBnM-vw@mail.gmail.com> (raw)
In-Reply-To: <20191017173743.5430-9-hch@lst.de>
On Thu, Oct 17, 2019 at 11:08 PM Christoph Hellwig <hch@lst.de> wrote:
>
> When running in M-mode we can't use the SBI to set the timer, and
> don't have access to the time CSR as that usually is emulated by
> M-mode. Instead provide code that directly accesses the MMIO for
> the timer.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---
> arch/riscv/include/asm/sbi.h | 3 ++-
> arch/riscv/include/asm/timex.h | 19 +++++++++++++++++--
> drivers/clocksource/timer-riscv.c | 21 +++++++++++++++++----
> 3 files changed, 36 insertions(+), 7 deletions(-)
>
> diff --git a/arch/riscv/include/asm/sbi.h b/arch/riscv/include/asm/sbi.h
> index 0cb74eccc73f..a4774bafe033 100644
> --- a/arch/riscv/include/asm/sbi.h
> +++ b/arch/riscv/include/asm/sbi.h
> @@ -95,7 +95,8 @@ static inline void sbi_remote_sfence_vma_asid(const unsigned long *hart_mask,
> SBI_CALL_4(SBI_REMOTE_SFENCE_VMA_ASID, hart_mask, start, size, asid);
> }
> #else /* CONFIG_RISCV_SBI */
> -/* stub to for code is only reachable under IS_ENABLED(CONFIG_RISCV_SBI): */
> +/* stubs to for code is only reachable under IS_ENABLED(CONFIG_RISCV_SBI): */
> +void sbi_set_timer(uint64_t stime_value);
> void sbi_remote_fence_i(const unsigned long *hart_mask);
> #endif /* CONFIG_RISCV_SBI */
> #endif /* _ASM_RISCV_SBI_H */
> diff --git a/arch/riscv/include/asm/timex.h b/arch/riscv/include/asm/timex.h
> index c7ef131b9e4c..e17837d61667 100644
> --- a/arch/riscv/include/asm/timex.h
> +++ b/arch/riscv/include/asm/timex.h
> @@ -7,12 +7,25 @@
> #define _ASM_RISCV_TIMEX_H
>
> #include <asm/csr.h>
> +#include <asm/io.h>
>
> typedef unsigned long cycles_t;
>
> +extern u64 __iomem *riscv_time_val;
> +extern u64 __iomem *riscv_time_cmp;
> +
> +#ifdef CONFIG_64BIT
> +#define mmio_get_cycles() readq_relaxed(riscv_time_val)
> +#else
> +#define mmio_get_cycles() readl_relaxed(riscv_time_val)
> +#define mmio_get_cycles_hi() readl_relaxed(((u32 *)riscv_time_val) + 1)
> +#endif
> +
> static inline cycles_t get_cycles(void)
> {
> - return csr_read(CSR_TIME);
> + if (IS_ENABLED(CONFIG_RISCV_SBI))
> + return csr_read(CSR_TIME);
> + return mmio_get_cycles();
> }
> #define get_cycles get_cycles
>
> @@ -24,7 +37,9 @@ static inline u64 get_cycles64(void)
> #else /* CONFIG_64BIT */
> static inline u32 get_cycles_hi(void)
> {
> - return csr_read(CSR_TIMEH);
> + if (IS_ENABLED(CONFIG_RISCV_SBI))
> + return csr_read(CSR_TIMEH);
> + return mmio_get_cycles_hi();
> }
>
> static inline u64 get_cycles64(void)
> diff --git a/drivers/clocksource/timer-riscv.c b/drivers/clocksource/timer-riscv.c
> index 5d2fdc3e28a9..2b9fbc4ebe49 100644
> --- a/drivers/clocksource/timer-riscv.c
> +++ b/drivers/clocksource/timer-riscv.c
> @@ -3,9 +3,9 @@
> * Copyright (C) 2012 Regents of the University of California
> * Copyright (C) 2017 SiFive
> *
> - * All RISC-V systems have a timer attached to every hart. These timers can be
> - * read from the "time" and "timeh" CSRs, and can use the SBI to setup
> - * events.
> + * All RISC-V systems have a timer attached to every hart. These timers can
> + * either be read from the "time" and "timeh" CSRs, and can use the SBI to
> + * setup events, or directly accessed using MMIO registers.
> */
> #include <linux/clocksource.h>
> #include <linux/clockchips.h>
> @@ -13,14 +13,27 @@
> #include <linux/delay.h>
> #include <linux/irq.h>
> #include <linux/sched_clock.h>
> +#include <linux/io-64-nonatomic-lo-hi.h>
> #include <asm/smp.h>
> #include <asm/sbi.h>
>
> +u64 __iomem *riscv_time_cmp;
> +u64 __iomem *riscv_time_val;
> +
> +static inline void mmio_set_timer(u64 val)
> +{
> + writeq_relaxed(val,
> + riscv_time_cmp + cpuid_to_hartid_map(smp_processor_id()));
> +}
> +
> static int riscv_clock_next_event(unsigned long delta,
> struct clock_event_device *ce)
> {
> csr_set(CSR_XIE, XIE_XTIE);
> - sbi_set_timer(get_cycles64() + delta);
> + if (IS_ENABLED(CONFIG_RISCV_SBI))
> + sbi_set_timer(get_cycles64() + delta);
> + else
> + mmio_set_timer(get_cycles64() + delta);
> return 0;
> }
>
> --
> 2.20.1
>
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv
LGTM.
Reviewed-by: Anup Patel <anup@brainfault.org>
Regards,
Anup
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
next prev parent reply other threads:[~2019-10-18 2:57 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-17 17:37 RISC-V nommu support v5 Christoph Hellwig
2019-10-17 17:37 ` [PATCH 01/15] riscv: cleanup <asm/bug.h> Christoph Hellwig
2019-10-18 2:50 ` Anup Patel
2019-10-23 22:04 ` Paul Walmsley
2019-10-17 17:37 ` [PATCH 02/15] riscv: cleanup do_trap_break Christoph Hellwig
2019-10-18 2:51 ` Anup Patel
2019-10-23 22:05 ` Paul Walmsley
2019-10-17 17:37 ` [PATCH 03/15] riscv: abstract out CSR names for supervisor vs machine mode Christoph Hellwig
2019-10-18 2:51 ` Anup Patel
2019-10-18 23:55 ` Paul Walmsley
2019-10-28 8:12 ` Christoph Hellwig
2019-10-17 17:37 ` [PATCH 04/15] riscv: don't allow selecting SBI based drivers for M-mode Christoph Hellwig
2019-10-18 2:52 ` Anup Patel
2019-10-17 17:37 ` [PATCH 05/15] riscv: poison SBI calls " Christoph Hellwig
2019-10-18 2:53 ` Anup Patel
2019-10-17 17:37 ` [PATCH 06/15] riscv: cleanup the default power off implementation Christoph Hellwig
2019-10-18 2:53 ` Anup Patel
2019-10-17 17:37 ` [PATCH 07/15] riscv: implement remote sfence.i using IPIs Christoph Hellwig
2019-10-18 2:55 ` Anup Patel
2019-10-17 17:37 ` [PATCH 08/15] riscv: add support for MMIO access to the timer registers Christoph Hellwig
2019-10-18 2:57 ` Anup Patel [this message]
2019-10-17 17:37 ` [PATCH 09/15] riscv: provide native clint access for M-mode Christoph Hellwig
2019-10-18 3:00 ` Anup Patel
2019-11-14 7:39 ` Paul Walmsley
2019-10-17 17:37 ` [PATCH 10/15] riscv: read the hart ID from mhartid on boot Christoph Hellwig
2019-10-18 3:01 ` Anup Patel
2019-11-14 7:40 ` Paul Walmsley
2019-10-17 17:37 ` [PATCH 11/15] riscv: use the correct interrupt levels for M-mode Christoph Hellwig
2019-10-18 3:01 ` Anup Patel
2019-10-17 17:37 ` [PATCH 12/15] riscv: clear the instruction cache and all registers when booting Christoph Hellwig
2019-10-18 3:05 ` Anup Patel
2019-10-17 17:37 ` [PATCH 13/15] riscv: add nommu support Christoph Hellwig
2019-10-18 3:04 ` Anup Patel
2019-10-17 17:37 ` [PATCH 14/15] riscv: provide a flat image loader Christoph Hellwig
2019-10-18 3:06 ` Anup Patel
2019-10-17 17:37 ` [PATCH 15/15] riscv: disable the EFI PECOFF header for M-mode Christoph Hellwig
2019-10-18 3:06 ` Anup Patel
2019-10-18 3:08 ` RISC-V nommu support v5 Anup Patel
2019-10-18 3:29 ` Paul Walmsley
2019-10-18 15:25 ` Christoph Hellwig
2019-10-18 23:46 ` Paul Walmsley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAAhSdy2Ln1H4hSbjSt30pZQpHRiP5G2rJffDXFDS6TbvBnM-vw@mail.gmail.com \
--to=anup@brainfault.org \
--cc=damien.lemoal@wdc.com \
--cc=hch@lst.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=palmer@sifive.com \
--cc=paul.walmsley@sifive.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).