From: Vitaly Wool <vitaly.wool@konsulko.com>
To: Alex Ghiti <alex@ghiti.fr>
Cc: "Atish Patra" <atish.patra@wdc.com>,
LKML <linux-kernel@vger.kernel.org>,
"Albert Ou" <aou@eecs.berkeley.edu>,
"Alistair Francis" <alistair.francis@wdc.com>,
"Anup Patel" <anup.patel@wdc.com>,
"Björn Töpel" <bjorn@kernel.org>,
devicetree@vger.kernel.org,
linux-riscv <linux-riscv@lists.infradead.org>,
"Palmer Dabbelt" <palmer@dabbelt.com>,
"Paul Walmsley" <paul.walmsley@sifive.com>,
"Rob Herring" <robh+dt@kernel.org>,
Conor.Dooley@microchip.com,
"Daire McNamara" <daire.mcnamara@microchip.com>,
Ivan.Griffin@microchip.com, Lewis.Hanly@microchip.com
Subject: Re: [PATCH v4 3/5] RISC-V: Initial DTS for Microchip ICICLE board
Date: Sun, 28 Mar 2021 17:22:07 +0200 [thread overview]
Message-ID: <CAM4kBBJXguCi7n_Y+inWqh5cp3Vq7UtQZz76Lox34ajNvU+Pwg@mail.gmail.com> (raw)
In-Reply-To: <7eb2b954-6b0a-b143-9107-57f4dd90d0cf@ghiti.fr>
On Sat, Mar 27, 2021 at 6:24 PM Alex Ghiti <alex@ghiti.fr> wrote:
>
> Hi Atish,
>
> Le 3/3/21 à 3:02 PM, Atish Patra a écrit :
> > Add initial DTS for Microchip ICICLE board having only
> > essential devices (clocks, sdhci, ethernet, serial, etc).
> > The device tree is based on the U-Boot patch.
> >
> > https://patchwork.ozlabs.org/project/uboot/patch/20201110103414.10142-6-padmarao.begari@microchip.com/
> >
> > Signed-off-by: Atish Patra <atish.patra@wdc.com>
> > ---
> > arch/riscv/boot/dts/Makefile | 1 +
> > arch/riscv/boot/dts/microchip/Makefile | 2 +
> > .../microchip/microchip-mpfs-icicle-kit.dts | 72 ++++
> > .../boot/dts/microchip/microchip-mpfs.dtsi | 329 ++++++++++++++++++
> > 4 files changed, 404 insertions(+)
> > create mode 100644 arch/riscv/boot/dts/microchip/Makefile
> > create mode 100644 arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts
> > create mode 100644 arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
> >
> > diff --git a/arch/riscv/boot/dts/Makefile b/arch/riscv/boot/dts/Makefile
> > index 7ffd502e3e7b..fe996b88319e 100644
> > --- a/arch/riscv/boot/dts/Makefile
> > +++ b/arch/riscv/boot/dts/Makefile
> > @@ -1,5 +1,6 @@
> > # SPDX-License-Identifier: GPL-2.0
> > subdir-y += sifive
> > subdir-$(CONFIG_SOC_CANAAN_K210_DTB_BUILTIN) += canaan
> > +subdir-y += microchip
> >
> > obj-$(CONFIG_BUILTIN_DTB) := $(addsuffix /, $(subdir-y))
> > diff --git a/arch/riscv/boot/dts/microchip/Makefile b/arch/riscv/boot/dts/microchip/Makefile
> > new file mode 100644
> > index 000000000000..622b12771fd3
> > --- /dev/null
> > +++ b/arch/riscv/boot/dts/microchip/Makefile
> > @@ -0,0 +1,2 @@
> > +# SPDX-License-Identifier: GPL-2.0
> > +dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += microchip-mpfs-icicle-kit.dtb
>
> I'm playing (or trying to...) with XIP_KERNEL and I had to add the
> following to have the device tree actually builtin the kernel:
>
> diff --git a/arch/riscv/boot/dts/microchip/Makefile
> b/arch/riscv/boot/dts/microchip/Makefile
> index 622b12771fd3..855c1502d912 100644
> --- a/arch/riscv/boot/dts/microchip/Makefile
> +++ b/arch/riscv/boot/dts/microchip/Makefile
> @@ -1,2 +1,3 @@
> # SPDX-License-Identifier: GPL-2.0
> dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += microchip-mpfs-icicle-kit.dtb
> +obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y))
>
> Alex
Yes, I believe this is necessary for BUILTIN_DTB to work on Polarfire,
regardless of whether the kernel is XIP or not.
Best regards,
Vitaly
> > diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts b/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts
> > new file mode 100644
> > index 000000000000..ec79944065c9
> > --- /dev/null
> > +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts
> > @@ -0,0 +1,72 @@
> > +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> > +/* Copyright (c) 2020 Microchip Technology Inc */
> > +
> > +/dts-v1/;
> > +
> > +#include "microchip-mpfs.dtsi"
> > +
> > +/* Clock frequency (in Hz) of the rtcclk */
> > +#define RTCCLK_FREQ 1000000
> > +
> > +/ {
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > + model = "Microchip PolarFire-SoC Icicle Kit";
> > + compatible = "microchip,mpfs-icicle-kit";
> > +
> > + chosen {
> > + stdout-path = &serial0;
> > + };
> > +
> > + cpus {
> > + timebase-frequency = <RTCCLK_FREQ>;
> > + };
> > +
> > + memory@80000000 {
> > + device_type = "memory";
> > + reg = <0x0 0x80000000 0x0 0x40000000>;
> > + clocks = <&clkcfg 26>;
> > + };
> > +
> > + soc {
> > + };
> > +};
> > +
> > +&serial0 {
> > + status = "okay";
> > +};
> > +
> > +&serial1 {
> > + status = "okay";
> > +};
> > +
> > +&serial2 {
> > + status = "okay";
> > +};
> > +
> > +&serial3 {
> > + status = "okay";
> > +};
> > +
> > +&sdcard {
> > + status = "okay";
> > +};
> > +
> > +&emac0 {
> > + phy-mode = "sgmii";
> > + phy-handle = <&phy0>;
> > + phy0: ethernet-phy@8 {
> > + reg = <8>;
> > + ti,fifo-depth = <0x01>;
> > + };
> > +};
> > +
> > +&emac1 {
> > + status = "okay";
> > + phy-mode = "sgmii";
> > + phy-handle = <&phy1>;
> > + phy1: ethernet-phy@9 {
> > + reg = <9>;
> > + ti,fifo-depth = <0x01>;
> > + };
> > +};
> > diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
> > new file mode 100644
> > index 000000000000..b9819570a7d1
> > --- /dev/null
> > +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
> > @@ -0,0 +1,329 @@
> > +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> > +/* Copyright (c) 2020 Microchip Technology Inc */
> > +
> > +/dts-v1/;
> > +
> > +/ {
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > + model = "Microchip MPFS Icicle Kit";
> > + compatible = "microchip,mpfs-icicle-kit";
> > +
> > + chosen {
> > + };
> > +
> > + cpus {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + cpu@0 {
> > + clock-frequency = <0>;
> > + compatible = "sifive,e51", "sifive,rocket0", "riscv";
> > + device_type = "cpu";
> > + i-cache-block-size = <64>;
> > + i-cache-sets = <128>;
> > + i-cache-size = <16384>;
> > + reg = <0>;
> > + riscv,isa = "rv64imac";
> > + status = "disabled";
> > +
> > + cpu0_intc: interrupt-controller {
> > + #interrupt-cells = <1>;
> > + compatible = "riscv,cpu-intc";
> > + interrupt-controller;
> > + };
> > + };
> > +
> > + cpu@1 {
> > + clock-frequency = <0>;
> > + compatible = "sifive,u54-mc", "sifive,rocket0", "riscv";
> > + d-cache-block-size = <64>;
> > + d-cache-sets = <64>;
> > + d-cache-size = <32768>;
> > + d-tlb-sets = <1>;
> > + d-tlb-size = <32>;
> > + device_type = "cpu";
> > + i-cache-block-size = <64>;
> > + i-cache-sets = <64>;
> > + i-cache-size = <32768>;
> > + i-tlb-sets = <1>;
> > + i-tlb-size = <32>;
> > + mmu-type = "riscv,sv39";
> > + reg = <1>;
> > + riscv,isa = "rv64imafdc";
> > + tlb-split;
> > + status = "okay";
> > +
> > + cpu1_intc: interrupt-controller {
> > + #interrupt-cells = <1>;
> > + compatible = "riscv,cpu-intc";
> > + interrupt-controller;
> > + };
> > + };
> > +
> > + cpu@2 {
> > + clock-frequency = <0>;
> > + compatible = "sifive,u54-mc", "sifive,rocket0", "riscv";
> > + d-cache-block-size = <64>;
> > + d-cache-sets = <64>;
> > + d-cache-size = <32768>;
> > + d-tlb-sets = <1>;
> > + d-tlb-size = <32>;
> > + device_type = "cpu";
> > + i-cache-block-size = <64>;
> > + i-cache-sets = <64>;
> > + i-cache-size = <32768>;
> > + i-tlb-sets = <1>;
> > + i-tlb-size = <32>;
> > + mmu-type = "riscv,sv39";
> > + reg = <2>;
> > + riscv,isa = "rv64imafdc";
> > + tlb-split;
> > + status = "okay";
> > +
> > + cpu2_intc: interrupt-controller {
> > + #interrupt-cells = <1>;
> > + compatible = "riscv,cpu-intc";
> > + interrupt-controller;
> > + };
> > + };
> > +
> > + cpu@3 {
> > + clock-frequency = <0>;
> > + compatible = "sifive,u54-mc", "sifive,rocket0", "riscv";
> > + d-cache-block-size = <64>;
> > + d-cache-sets = <64>;
> > + d-cache-size = <32768>;
> > + d-tlb-sets = <1>;
> > + d-tlb-size = <32>;
> > + device_type = "cpu";
> > + i-cache-block-size = <64>;
> > + i-cache-sets = <64>;
> > + i-cache-size = <32768>;
> > + i-tlb-sets = <1>;
> > + i-tlb-size = <32>;
> > + mmu-type = "riscv,sv39";
> > + reg = <3>;
> > + riscv,isa = "rv64imafdc";
> > + tlb-split;
> > + status = "okay";
> > +
> > + cpu3_intc: interrupt-controller {
> > + #interrupt-cells = <1>;
> > + compatible = "riscv,cpu-intc";
> > + interrupt-controller;
> > + };
> > + };
> > +
> > + cpu@4 {
> > + clock-frequency = <0>;
> > + compatible = "sifive,u54-mc", "sifive,rocket0", "riscv";
> > + d-cache-block-size = <64>;
> > + d-cache-sets = <64>;
> > + d-cache-size = <32768>;
> > + d-tlb-sets = <1>;
> > + d-tlb-size = <32>;
> > + device_type = "cpu";
> > + i-cache-block-size = <64>;
> > + i-cache-sets = <64>;
> > + i-cache-size = <32768>;
> > + i-tlb-sets = <1>;
> > + i-tlb-size = <32>;
> > + mmu-type = "riscv,sv39";
> > + reg = <4>;
> > + riscv,isa = "rv64imafdc";
> > + tlb-split;
> > + status = "okay";
> > + cpu4_intc: interrupt-controller {
> > + #interrupt-cells = <1>;
> > + compatible = "riscv,cpu-intc";
> > + interrupt-controller;
> > + };
> > + };
> > + };
> > +
> > + soc {
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > + compatible = "simple-bus";
> > + ranges;
> > +
> > + cache-controller@2010000 {
> > + compatible = "sifive,fu540-c000-ccache", "cache";
> > + cache-block-size = <64>;
> > + cache-level = <2>;
> > + cache-sets = <1024>;
> > + cache-size = <2097152>;
> > + cache-unified;
> > + interrupt-parent = <&plic>;
> > + interrupts = <1 2 3>;
> > + reg = <0x0 0x2010000 0x0 0x1000>;
> > + };
> > +
> > + clint@2000000 {
> > + compatible = "sifive,clint0";
> > + reg = <0x0 0x2000000 0x0 0xC000>;
> > + interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7
> > + &cpu1_intc 3 &cpu1_intc 7
> > + &cpu2_intc 3 &cpu2_intc 7
> > + &cpu3_intc 3 &cpu3_intc 7
> > + &cpu4_intc 3 &cpu4_intc 7>;
> > + };
> > +
> > + plic: interrupt-controller@c000000 {
> > + #interrupt-cells = <1>;
> > + compatible = "sifive,plic-1.0.0";
> > + reg = <0x0 0xc000000 0x0 0x4000000>;
> > + riscv,ndev = <186>;
> > + interrupt-controller;
> > + interrupts-extended = <&cpu0_intc 11
> > + &cpu1_intc 11 &cpu1_intc 9
> > + &cpu2_intc 11 &cpu2_intc 9
> > + &cpu3_intc 11 &cpu3_intc 9
> > + &cpu4_intc 11 &cpu4_intc 9>;
> > + };
> > +
> > + dma@3000000 {
> > + compatible = "sifive,fu540-c000-pdma";
> > + reg = <0x0 0x3000000 0x0 0x8000>;
> > + interrupt-parent = <&plic>;
> > + interrupts = <23 24 25 26 27 28 29 30>;
> > + #dma-cells = <1>;
> > + };
> > +
> > + refclk: refclk {
> > + compatible = "fixed-clock";
> > + #clock-cells = <0>;
> > + clock-frequency = <600000000>;
> > + clock-output-names = "msspllclk";
> > + };
> > +
> > + clkcfg: clkcfg@20002000 {
> > + compatible = "microchip,mpfs-clkcfg";
> > + reg = <0x0 0x20002000 0x0 0x1000>;
> > + reg-names = "mss_sysreg";
> > + clocks = <&refclk>;
> > + #clock-cells = <1>;
> > + clock-output-names = "cpu", "axi", "ahb", "envm", /* 0-3 */
> > + "mac0", "mac1", "mmc", "timer", /* 4-7 */
> > + "mmuart0", "mmuart1", "mmuart2", "mmuart3", /* 8-11 */
> > + "mmuart4", "spi0", "spi1", "i2c0", /* 12-15 */
> > + "i2c1", "can0", "can1", "usb", /* 16-19 */
> > + "rsvd", "rtc", "qspi", "gpio0", /* 20-23 */
> > + "gpio1", "gpio2", "ddrc", "fic0", /* 24-27 */
> > + "fic1", "fic2", "fic3", "athena", "cfm"; /* 28-32 */
> > + };
> > +
> > + serial0: serial@20000000 {
> > + compatible = "ns16550a";
> > + reg = <0x0 0x20000000 0x0 0x400>;
> > + reg-io-width = <4>;
> > + reg-shift = <2>;
> > + interrupt-parent = <&plic>;
> > + interrupts = <90>;
> > + current-speed = <115200>;
> > + clocks = <&clkcfg 8>;
> > + status = "disabled";
> > + };
> > +
> > + serial1: serial@20100000 {
> > + compatible = "ns16550a";
> > + reg = <0x0 0x20100000 0x0 0x400>;
> > + reg-io-width = <4>;
> > + reg-shift = <2>;
> > + interrupt-parent = <&plic>;
> > + interrupts = <91>;
> > + current-speed = <115200>;
> > + clocks = <&clkcfg 9>;
> > + status = "disabled";
> > + };
> > +
> > + serial2: serial@20102000 {
> > + compatible = "ns16550a";
> > + reg = <0x0 0x20102000 0x0 0x400>;
> > + reg-io-width = <4>;
> > + reg-shift = <2>;
> > + interrupt-parent = <&plic>;
> > + interrupts = <92>;
> > + current-speed = <115200>;
> > + clocks = <&clkcfg 10>;
> > + status = "disabled";
> > + };
> > +
> > + serial3: serial@20104000 {
> > + compatible = "ns16550a";
> > + reg = <0x0 0x20104000 0x0 0x400>;
> > + reg-io-width = <4>;
> > + reg-shift = <2>;
> > + interrupt-parent = <&plic>;
> > + interrupts = <93>;
> > + current-speed = <115200>;
> > + clocks = <&clkcfg 11>;
> > + status = "disabled";
> > + };
> > +
> > + emmc: mmc@20008000 {
> > + compatible = "cdns,sd4hc";
> > + reg = <0x0 0x20008000 0x0 0x1000>;
> > + interrupt-parent = <&plic>;
> > + interrupts = <88 89>;
> > + pinctrl-names = "default";
> > + clocks = <&clkcfg 6>;
> > + bus-width = <4>;
> > + cap-mmc-highspeed;
> > + mmc-ddr-3_3v;
> > + max-frequency = <200000000>;
> > + non-removable;
> > + no-sd;
> > + no-sdio;
> > + voltage-ranges = <3300 3300>;
> > + status = "disabled";
> > + };
> > +
> > + sdcard: sdhc@20008000 {
> > + compatible = "cdns,sd4hc";
> > + reg = <0x0 0x20008000 0x0 0x1000>;
> > + interrupt-parent = <&plic>;
> > + interrupts = <88>;
> > + pinctrl-names = "default";
> > + clocks = <&clkcfg 6>;
> > + bus-width = <4>;
> > + disable-wp;
> > + cap-sd-highspeed;
> > + card-detect-delay = <200>;
> > + sd-uhs-sdr12;
> > + sd-uhs-sdr25;
> > + sd-uhs-sdr50;
> > + sd-uhs-sdr104;
> > + max-frequency = <200000000>;
> > + status = "disabled";
> > + };
> > +
> > + emac0: ethernet@20110000 {
> > + compatible = "cdns,macb";
> > + reg = <0x0 0x20110000 0x0 0x2000>;
> > + interrupt-parent = <&plic>;
> > + interrupts = <64 65 66 67>;
> > + local-mac-address = [00 00 00 00 00 00];
> > + clocks = <&clkcfg 4>, <&clkcfg 2>;
> > + clock-names = "pclk", "hclk";
> > + status = "disabled";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + };
> > +
> > + emac1: ethernet@20112000 {
> > + compatible = "cdns,macb";
> > + reg = <0x0 0x20112000 0x0 0x2000>;
> > + interrupt-parent = <&plic>;
> > + interrupts = <70 71 72 73>;
> > + mac-address = [00 00 00 00 00 00];
> > + clocks = <&clkcfg 5>, <&clkcfg 2>;
> > + status = "disabled";
> > + clock-names = "pclk", "hclk";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + };
> > +
> > + };
> > +};
> >
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
next prev parent reply other threads:[~2021-03-29 17:04 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-03 20:02 [PATCH v4 0/5] Add Microchip PolarFire Soc Support Atish Patra
2021-03-03 20:02 ` [PATCH v4 1/5] RISC-V: Add Microchip PolarFire SoC kconfig option Atish Patra
2021-03-03 20:02 ` [PATCH v4 2/5] dt-bindings: riscv: microchip: Add YAML documentation for the PolarFire SoC Atish Patra
2021-03-08 20:11 ` Rob Herring
2021-03-03 20:02 ` [PATCH v4 3/5] RISC-V: Initial DTS for Microchip ICICLE board Atish Patra
2021-03-09 10:56 ` Ben Dooks
[not found] ` <DM6PR11MB3770E7FA8121AA91D9EDC4FEE5929@DM6PR11MB3770.namprd11.prod.outlook.com>
2021-03-09 19:34 ` Atish Patra
2021-03-22 6:04 ` Bin Meng
2021-03-27 17:22 ` Alex Ghiti
2021-03-28 15:22 ` Vitaly Wool [this message]
2021-04-18 3:36 ` Atish Patra
2021-04-18 4:24 ` Atish Patra
2021-04-18 18:39 ` Vitaly Wool
2021-03-03 20:02 ` [PATCH v4 4/5] RISC-V: Enable Microchip PolarFire ICICLE SoC Atish Patra
2021-03-03 20:02 ` [PATCH v4 5/5] MAINTAINERS: add microchip polarfire soc support Atish Patra
2021-03-30 4:17 ` [PATCH v4 0/5] Add Microchip PolarFire Soc Support Palmer Dabbelt
2021-04-18 3:26 ` Atish Patra
2021-04-22 22:33 ` Atish Patra
2021-04-23 1:37 ` Palmer Dabbelt
2021-04-23 8:44 ` Conor.Dooley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAM4kBBJXguCi7n_Y+inWqh5cp3Vq7UtQZz76Lox34ajNvU+Pwg@mail.gmail.com \
--to=vitaly.wool@konsulko.com \
--cc=Conor.Dooley@microchip.com \
--cc=Ivan.Griffin@microchip.com \
--cc=Lewis.Hanly@microchip.com \
--cc=alex@ghiti.fr \
--cc=alistair.francis@wdc.com \
--cc=anup.patel@wdc.com \
--cc=aou@eecs.berkeley.edu \
--cc=atish.patra@wdc.com \
--cc=bjorn@kernel.org \
--cc=daire.mcnamara@microchip.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).