* [PATCH] arch/riscv: disable too many harts before pick main boot hart
@ 2019-09-06 6:56 Xiang Wang
2019-09-10 9:56 ` Anup Patel
2019-09-19 10:25 ` Paul Walmsley
0 siblings, 2 replies; 6+ messages in thread
From: Xiang Wang @ 2019-09-06 6:56 UTC (permalink / raw)
To: paul.walmsley, palmer, aou, linux-riscv, linux-kernel; +Cc: citypw
From 12300865d1103618c9d4c375f7d7fbe601b6618c Mon Sep 17 00:00:00 2001
From: Xiang Wang <merle@hardenedlinux.org>
Date: Fri, 6 Sep 2019 11:56:09 +0800
Subject: [PATCH] arch/riscv: disable too many harts before pick main boot hart
These harts with id greater than or equal to CONFIG_NR_CPUS need to be disabled.
But pick the main Hart can choose any one. So, before pick the main hart, you
need to disable the hart with id greater than or equal to CONFIG_NR_CPUS.
Signed-off-by: Xiang Wang <merle@hardenedlinux.org>
---
arch/riscv/kernel/head.S | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S
index 0f1ba17e476f..cfffea38eb17 100644
--- a/arch/riscv/kernel/head.S
+++ b/arch/riscv/kernel/head.S
@@ -63,6 +63,11 @@ _start_kernel:
li t0, SR_FS
csrc sstatus, t0
+#ifdef CONFIG_SMP
+ li t0, CONFIG_NR_CPUS
+ bgeu a0, t0, .Lsecondary_park
+#endif
+
/* Pick one hart to run the main boot sequence */
la a3, hart_lottery
li a2, 1
@@ -154,9 +159,6 @@ relocate:
.Lsecondary_start:
#ifdef CONFIG_SMP
- li a1, CONFIG_NR_CPUS
- bgeu a0, a1, .Lsecondary_park
-
/* Set trap vector to spin forever to help debug */
la a3, .Lsecondary_park
csrw CSR_STVEC, a3
--
2.20.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH] arch/riscv: disable too many harts before pick main boot hart
2019-09-06 6:56 [PATCH] arch/riscv: disable too many harts before pick main boot hart Xiang Wang
@ 2019-09-10 9:56 ` Anup Patel
2019-09-19 10:25 ` Paul Walmsley
1 sibling, 0 replies; 6+ messages in thread
From: Anup Patel @ 2019-09-10 9:56 UTC (permalink / raw)
To: Xiang Wang; +Cc: aou, palmer, linux-kernel, paul.walmsley, linux-riscv, citypw
On Fri, Sep 6, 2019 at 12:26 PM Xiang Wang <merle@hardenedlinux.org> wrote:
>
> From 12300865d1103618c9d4c375f7d7fbe601b6618c Mon Sep 17 00:00:00 2001
> From: Xiang Wang <merle@hardenedlinux.org>
> Date: Fri, 6 Sep 2019 11:56:09 +0800
> Subject: [PATCH] arch/riscv: disable too many harts before pick main boot hart
>
> These harts with id greater than or equal to CONFIG_NR_CPUS need to be disabled.
> But pick the main Hart can choose any one. So, before pick the main hart, you
> need to disable the hart with id greater than or equal to CONFIG_NR_CPUS.
>
> Signed-off-by: Xiang Wang <merle@hardenedlinux.org>
> ---
> arch/riscv/kernel/head.S | 8 +++++---
> 1 file changed, 5 insertions(+), 3 deletions(-)
>
> diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S
> index 0f1ba17e476f..cfffea38eb17 100644
> --- a/arch/riscv/kernel/head.S
> +++ b/arch/riscv/kernel/head.S
> @@ -63,6 +63,11 @@ _start_kernel:
> li t0, SR_FS
> csrc sstatus, t0
>
> +#ifdef CONFIG_SMP
> + li t0, CONFIG_NR_CPUS
> + bgeu a0, t0, .Lsecondary_park
> +#endif
> +
> /* Pick one hart to run the main boot sequence */
> la a3, hart_lottery
> li a2, 1
> @@ -154,9 +159,6 @@ relocate:
>
> .Lsecondary_start:
> #ifdef CONFIG_SMP
> - li a1, CONFIG_NR_CPUS
> - bgeu a0, a1, .Lsecondary_park
> -
> /* Set trap vector to spin forever to help debug */
> la a3, .Lsecondary_park
> csrw CSR_STVEC, a3
> --
> 2.20.1
>
>
>
>
>
>
>
Looks good to me.
Reviewed-by: Anup Patel <anup@brainfault.org>
Regards,
Anup
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] arch/riscv: disable too many harts before pick main boot hart
2019-09-06 6:56 [PATCH] arch/riscv: disable too many harts before pick main boot hart Xiang Wang
2019-09-10 9:56 ` Anup Patel
@ 2019-09-19 10:25 ` Paul Walmsley
2019-09-19 10:30 ` Xiang Wang
2019-09-19 10:55 ` Anup Patel
1 sibling, 2 replies; 6+ messages in thread
From: Paul Walmsley @ 2019-09-19 10:25 UTC (permalink / raw)
To: Xiang Wang; +Cc: linux-riscv, palmer, linux-kernel, aou, citypw
On Fri, 6 Sep 2019, Xiang Wang wrote:
> From 12300865d1103618c9d4c375f7d7fbe601b6618c Mon Sep 17 00:00:00 2001
> From: Xiang Wang <merle@hardenedlinux.org>
> Date: Fri, 6 Sep 2019 11:56:09 +0800
> Subject: [PATCH] arch/riscv: disable too many harts before pick main boot hart
>
> These harts with id greater than or equal to CONFIG_NR_CPUS need to be disabled.
> But pick the main Hart can choose any one. So, before pick the main hart, you
> need to disable the hart with id greater than or equal to CONFIG_NR_CPUS.
>
> Signed-off-by: Xiang Wang <merle@hardenedlinux.org>
Thanks, here's what I'm planning to queue for v5.4-rc1. Please let me
know ASAP if you want to change the patch description.
- Paul
From: Xiang Wang <merle@hardenedlinux.org>
Date: Fri, 6 Sep 2019 11:56:09 +0800
Subject: [PATCH] arch/riscv: disable excess harts before picking main boot hart
Harts with id greater than or equal to CONFIG_NR_CPUS need to be
disabled. But the kernel can pick any hart as the main hart. So,
before picking the main hart, the kernel must disable harts with ids
greater than or equal to CONFIG_NR_CPUS.
Signed-off-by: Xiang Wang <merle@hardenedlinux.org>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
[paul.walmsley@sifive.com: updated to apply; cleaned up patch
description]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
---
arch/riscv/kernel/head.S | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S
index 15a9189f91ad..72f89b7590dd 100644
--- a/arch/riscv/kernel/head.S
+++ b/arch/riscv/kernel/head.S
@@ -63,6 +63,11 @@ _start_kernel:
li t0, SR_FS
csrc CSR_SSTATUS, t0
+#ifdef CONFIG_SMP
+ li t0, CONFIG_NR_CPUS
+ bgeu a0, t0, .Lsecondary_park
+#endif
+
/* Pick one hart to run the main boot sequence */
la a3, hart_lottery
li a2, 1
@@ -154,9 +159,6 @@ relocate:
.Lsecondary_start:
#ifdef CONFIG_SMP
- li a1, CONFIG_NR_CPUS
- bgeu a0, a1, .Lsecondary_park
-
/* Set trap vector to spin forever to help debug */
la a3, .Lsecondary_park
csrw CSR_STVEC, a3
--
2.23.0
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH] arch/riscv: disable too many harts before pick main boot hart
2019-09-19 10:25 ` Paul Walmsley
@ 2019-09-19 10:30 ` Xiang Wang
2019-09-19 10:55 ` Anup Patel
1 sibling, 0 replies; 6+ messages in thread
From: Xiang Wang @ 2019-09-19 10:30 UTC (permalink / raw)
To: Paul Walmsley; +Cc: linux-riscv, palmer, linux-kernel, aou, citypw
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On 2019年9月19日ThursdayPM6点25分, Paul Walmsley <paul.walmsley@sifive.com> wrote:
> On Fri, 6 Sep 2019, Xiang Wang wrote:
>
> > From 12300865d1103618c9d4c375f7d7fbe601b6618c Mon Sep 17 00:00:00 2001
> > From: Xiang Wang merle@hardenedlinux.org
> > Date: Fri, 6 Sep 2019 11:56:09 +0800
> > Subject: [PATCH] arch/riscv: disable too many harts before pick main boot hart
> > These harts with id greater than or equal to CONFIG_NR_CPUS need to be disabled.
> > But pick the main Hart can choose any one. So, before pick the main hart, you
> > need to disable the hart with id greater than or equal to CONFIG_NR_CPUS.
> > Signed-off-by: Xiang Wang merle@hardenedlinux.org
>
> Thanks, here's what I'm planning to queue for v5.4-rc1. Please let me
> know ASAP if you want to change the patch description.
>
> - Paul
Not need to change
>
> From: Xiang Wang merle@hardenedlinux.org
>
>
> Date: Fri, 6 Sep 2019 11:56:09 +0800
> Subject: [PATCH] arch/riscv: disable excess harts before picking main boot hart
>
> Harts with id greater than or equal to CONFIG_NR_CPUS need to be
> disabled. But the kernel can pick any hart as the main hart. So,
> before picking the main hart, the kernel must disable harts with ids
> greater than or equal to CONFIG_NR_CPUS.
>
> Signed-off-by: Xiang Wang merle@hardenedlinux.org
> Reviewed-by: Palmer Dabbelt palmer@sifive.com
> [paul.walmsley@sifive.com: updated to apply; cleaned up patch
> description]
> Signed-off-by: Paul Walmsley paul.walmsley@sifive.com
>
> arch/riscv/kernel/head.S | 8 +++++---
> 1 file changed, 5 insertions(+), 3 deletions(-)
>
> diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S
> index 15a9189f91ad..72f89b7590dd 100644
> --- a/arch/riscv/kernel/head.S
> +++ b/arch/riscv/kernel/head.S
> @@ -63,6 +63,11 @@ _start_kernel:
> li t0, SR_FS
> csrc CSR_SSTATUS, t0
>
> +#ifdef CONFIG_SMP
>
> - li t0, CONFIG_NR_CPUS
> - bgeu a0, t0, .Lsecondary_park
> +#endif
>
> - /* Pick one hart to run the main boot sequence */
> la a3, hart_lottery
> li a2, 1
> @@ -154,9 +159,6 @@ relocate:
>
> .Lsecondary_start:
> #ifdef CONFIG_SMP
>
>
> - li a1, CONFIG_NR_CPUS
> - bgeu a0, a1, .Lsecondary_park
> - /* Set trap vector to spin forever to help debug */
> la a3, .Lsecondary_park
> csrw CSR_STVEC, a3
> --
> 2.23.0
>
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 6+ messages in thread
* RE: [PATCH] arch/riscv: disable too many harts before pick main boot hart
2019-09-19 10:25 ` Paul Walmsley
2019-09-19 10:30 ` Xiang Wang
@ 2019-09-19 10:55 ` Anup Patel
2019-09-19 11:04 ` Paul Walmsley
1 sibling, 1 reply; 6+ messages in thread
From: Anup Patel @ 2019-09-19 10:55 UTC (permalink / raw)
To: Paul Walmsley, Xiang Wang; +Cc: linux-riscv, palmer, linux-kernel, aou, citypw
> -----Original Message-----
> From: linux-kernel-owner@vger.kernel.org <linux-kernel-
> owner@vger.kernel.org> On Behalf Of Paul Walmsley
> Sent: Thursday, September 19, 2019 3:56 PM
> To: Xiang Wang <merle@hardenedlinux.org>
> Cc: palmer@sifive.com; aou@eecs.berkeley.edu; linux-
> riscv@lists.infradead.org; linux-kernel@vger.kernel.org;
> citypw@hardenedlinux.org
> Subject: Re: [PATCH] arch/riscv: disable too many harts before pick main
> boot hart
>
> On Fri, 6 Sep 2019, Xiang Wang wrote:
>
> > From 12300865d1103618c9d4c375f7d7fbe601b6618c Mon Sep 17 00:00:00
> 2001
> > From: Xiang Wang <merle@hardenedlinux.org>
> > Date: Fri, 6 Sep 2019 11:56:09 +0800
> > Subject: [PATCH] arch/riscv: disable too many harts before pick main
> > boot hart
> >
> > These harts with id greater than or equal to CONFIG_NR_CPUS need to be
> disabled.
> > But pick the main Hart can choose any one. So, before pick the main
> > hart, you need to disable the hart with id greater than or equal to
> CONFIG_NR_CPUS.
> >
> > Signed-off-by: Xiang Wang <merle@hardenedlinux.org>
>
> Thanks, here's what I'm planning to queue for v5.4-rc1. Please let me know
> ASAP if you want to change the patch description.
>
>
> - Paul
>
> From: Xiang Wang <merle@hardenedlinux.org>
> Date: Fri, 6 Sep 2019 11:56:09 +0800
> Subject: [PATCH] arch/riscv: disable excess harts before picking main boot
> hart
>
> Harts with id greater than or equal to CONFIG_NR_CPUS need to be
> disabled. But the kernel can pick any hart as the main hart. So,
> before picking the main hart, the kernel must disable harts with ids
> greater than or equal to CONFIG_NR_CPUS.
>
> Signed-off-by: Xiang Wang <merle@hardenedlinux.org>
You missed my Reviewed-by here.
Regards,
Anup
> Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
> [paul.walmsley@sifive.com: updated to apply; cleaned up patch
> description]
> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
> ---
> arch/riscv/kernel/head.S | 8 +++++---
> 1 file changed, 5 insertions(+), 3 deletions(-)
>
> diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S
> index 15a9189f91ad..72f89b7590dd 100644
> --- a/arch/riscv/kernel/head.S
> +++ b/arch/riscv/kernel/head.S
> @@ -63,6 +63,11 @@ _start_kernel:
> li t0, SR_FS
> csrc CSR_SSTATUS, t0
>
> +#ifdef CONFIG_SMP
> + li t0, CONFIG_NR_CPUS
> + bgeu a0, t0, .Lsecondary_park
> +#endif
> +
> /* Pick one hart to run the main boot sequence */
> la a3, hart_lottery
> li a2, 1
> @@ -154,9 +159,6 @@ relocate:
>
> .Lsecondary_start:
> #ifdef CONFIG_SMP
> - li a1, CONFIG_NR_CPUS
> - bgeu a0, a1, .Lsecondary_park
> -
> /* Set trap vector to spin forever to help debug */
> la a3, .Lsecondary_park
> csrw CSR_STVEC, a3
> --
> 2.23.0
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 6+ messages in thread
* RE: [PATCH] arch/riscv: disable too many harts before pick main boot hart
2019-09-19 10:55 ` Anup Patel
@ 2019-09-19 11:04 ` Paul Walmsley
0 siblings, 0 replies; 6+ messages in thread
From: Paul Walmsley @ 2019-09-19 11:04 UTC (permalink / raw)
To: Anup Patel
Cc: aou, palmer, linux-kernel, Paul Walmsley, linux-riscv,
Xiang Wang, citypw
On Thu, 19 Sep 2019, Anup Patel wrote:
> > From: Xiang Wang <merle@hardenedlinux.org>
> > Date: Fri, 6 Sep 2019 11:56:09 +0800
> > Subject: [PATCH] arch/riscv: disable excess harts before picking main boot
> > hart
> >
> > Harts with id greater than or equal to CONFIG_NR_CPUS need to be
> > disabled. But the kernel can pick any hart as the main hart. So,
> > before picking the main hart, the kernel must disable harts with ids
> > greater than or equal to CONFIG_NR_CPUS.
> >
> > Signed-off-by: Xiang Wang <merle@hardenedlinux.org>
>
> You missed my Reviewed-by here.
Thanks, added.
- Paul
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2019-09-19 11:04 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-09-06 6:56 [PATCH] arch/riscv: disable too many harts before pick main boot hart Xiang Wang
2019-09-10 9:56 ` Anup Patel
2019-09-19 10:25 ` Paul Walmsley
2019-09-19 10:30 ` Xiang Wang
2019-09-19 10:55 ` Anup Patel
2019-09-19 11:04 ` Paul Walmsley
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).