From: Conor Dooley <conor@kernel.org>
To: Hal Feng <hal.feng@starfivetech.com>
Cc: linux-riscv@lists.infradead.org, devicetree@vger.kernel.org,
Palmer Dabbelt <palmer@dabbelt.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Paul Walmsley <paul.walmsley@sifive.com>,
Albert Ou <aou@eecs.berkeley.edu>,
Ben Dooks <ben.dooks@sifive.com>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Thomas Gleixner <tglx@linutronix.de>,
Marc Zyngier <maz@kernel.org>, Stephen Boyd <sboyd@kernel.org>,
Michael Turquette <mturquette@baylibre.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
Linus Walleij <linus.walleij@linaro.org>,
Emil Renner Berthing <emil.renner.berthing@canonical.com>,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 7/7] riscv: dts: starfive: Add StarFive JH7110 VisionFive 2 board device tree
Date: Tue, 20 Dec 2022 21:26:07 +0000 [thread overview]
Message-ID: <Y6Iob3csmKMl0rB/@spud> (raw)
In-Reply-To: <20221220011247.35560-8-hal.feng@starfivetech.com>
[-- Attachment #1.1: Type: text/plain, Size: 3758 bytes --]
On Tue, Dec 20, 2022 at 09:12:47AM +0800, Hal Feng wrote:
> From: Emil Renner Berthing <kernel@esmil.dk>
>
> Add a minimal device tree for StarFive JH7110 VisionFive 2 board
> which has version A and version B. Support booting and basic
> clock/reset/pinctrl/uart drivers.
>
> Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
> Co-developed-by: Jianlong Huang <jianlong.huang@starfivetech.com>
> Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
> Co-developed-by: Hal Feng <hal.feng@starfivetech.com>
> Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
> ---
> arch/riscv/boot/dts/starfive/Makefile | 1 +
> .../jh7110-starfive-visionfive-2-va.dts | 13 ++
> .../jh7110-starfive-visionfive-2-vb.dts | 13 ++
> .../jh7110-starfive-visionfive-2.dtsi | 111 ++++++++++++++++++
> 4 files changed, 138 insertions(+)
> create mode 100644 arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-va.dts
> create mode 100644 arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-vb.dts
> create mode 100644 arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
>
> diff --git a/arch/riscv/boot/dts/starfive/Makefile b/arch/riscv/boot/dts/starfive/Makefile
> index 0ea1bc15ab30..79e925a4a227 100644
> --- a/arch/riscv/boot/dts/starfive/Makefile
> +++ b/arch/riscv/boot/dts/starfive/Makefile
> @@ -1,2 +1,3 @@
> # SPDX-License-Identifier: GPL-2.0
> dtb-$(CONFIG_SOC_STARFIVE) += jh7100-beaglev-starlight.dtb
> +dtb-$(CONFIG_SOC_STARFIVE) += jh7110-starfive-visionfive-2-va.dtb jh7110-starfive-visionfive-2-vb.dtb
Could you rebase on top of v6.2-rc1 when you submit your next version
squash this in please (unless Emil hates it):
diff --git a/arch/riscv/boot/dts/starfive/Makefile b/arch/riscv/boot/dts/starfive/Makefile
index c38a9ade7f48..b3744420253a 100644
--- a/arch/riscv/boot/dts/starfive/Makefile
+++ b/arch/riscv/boot/dts/starfive/Makefile
@@ -1,3 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
-dtb-$(CONFIG_SOC_STARFIVE) += jh7100-beaglev-starlight.dtb jh7100-starfive-visionfive-v1.dtb
-dtb-$(CONFIG_SOC_STARFIVE) += jh7110-starfive-visionfive-2-va.dtb jh7110-starfive-visionfive-2-vb.dtb
+dtb-$(CONFIG_SOC_STARFIVE) += jh7100-beaglev-starlight.dtb
+dtb-$(CONFIG_SOC_STARFIVE) += jh7100-starfive-visionfive-v1.dtb
+dtb-$(CONFIG_SOC_STARFIVE) += jh7110-starfive-visionfive-2-va.dtb
+dtb-$(CONFIG_SOC_STARFIVE) += jh7110-starfive-visionfive-2-vb.dtb
I'd rather have more, but easier to read lines than long ones.
> diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
> new file mode 100644
> index 000000000000..c60280b89c73
> --- /dev/null
> +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
> @@ -0,0 +1,111 @@
> +// SPDX-License-Identifier: GPL-2.0 OR MIT
> +/*
> + * Copyright (C) 2022 StarFive Technology Co., Ltd.
> + * Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk>
> + */
> +
> +/dts-v1/;
> +#include "jh7110.dtsi"
> +#include "jh7110-pinfunc.h"
> +#include <dt-bindings/gpio/gpio.h>
> +
> +/ {
> + aliases {
> + serial0 = &uart0;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + cpus {
> + timebase-frequency = <4000000>;
> + };
> +
> + memory@40000000 {
> + device_type = "memory";
> + reg = <0x0 0x40000000 0x1 0x0>;
Is this a good idea when you have SKUs with 2, 4 & 8 GiB of DDR?
Anyways, I can't review this as I've got neither board nor
documentation, so with the above stuff sorted out:
Acked-by: Conor Dooley <conor.dooley@microchip.com>
I'll not apply it until the clock binding header is in my tree.
Thanks,
Conor.
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
[-- Attachment #2: Type: text/plain, Size: 161 bytes --]
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
next prev parent reply other threads:[~2022-12-20 21:26 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-20 1:12 [PATCH v3 0/7] Basic device tree support for StarFive JH7110 RISC-V SoC Hal Feng
2022-12-20 1:12 ` [PATCH v3 1/7] dt-bindings: riscv: Add StarFive JH7110 SoC and VisionFive 2 board Hal Feng
2022-12-20 10:05 ` Krzysztof Kozlowski
2022-12-23 2:05 ` Hal Feng
2022-12-20 20:58 ` Conor Dooley
2022-12-23 2:15 ` Hal Feng
2022-12-20 1:12 ` [PATCH v3 2/7] dt-bindings: timer: Add StarFive JH7110 clint Hal Feng
2022-12-20 1:12 ` [PATCH v3 3/7] dt-bindings: interrupt-controller: Add StarFive JH7110 plic Hal Feng
2022-12-20 1:12 ` [PATCH v3 4/7] dt-bindings: sifive,ccache0: Support StarFive JH7110 SoC Hal Feng
2022-12-20 20:21 ` Rob Herring
2022-12-20 1:12 ` [PATCH v3 5/7] soc: sifive: ccache: Add StarFive JH7110 support Hal Feng
2022-12-20 21:14 ` Conor Dooley
2022-12-20 1:12 ` [PATCH v3 6/7] riscv: dts: starfive: Add initial StarFive JH7110 device tree Hal Feng
2022-12-20 10:10 ` Krzysztof Kozlowski
2022-12-25 10:31 ` Hal Feng
2022-12-25 11:56 ` Krzysztof Kozlowski
2022-12-20 21:31 ` Conor Dooley
2022-12-25 14:31 ` Hal Feng
2022-12-27 20:58 ` Conor Dooley
2022-12-28 22:48 ` Conor Dooley
2022-12-29 5:25 ` Icenowy Zheng
2022-12-29 9:02 ` Conor Dooley
2023-02-01 7:53 ` Hal Feng
2023-02-01 7:31 ` Hal Feng
2023-02-01 7:21 ` Hal Feng
2023-02-01 8:21 ` Conor Dooley
2023-02-02 18:56 ` Hal Feng
2023-02-02 19:41 ` Conor Dooley
2023-02-09 11:11 ` Conor Dooley
2023-02-13 9:41 ` Hal Feng
2023-02-13 10:07 ` Conor Dooley
2023-02-14 2:37 ` Hal Feng
2023-02-15 3:07 ` Hal Feng
2023-02-15 7:42 ` Conor Dooley
2023-02-15 7:59 ` Conor Dooley
2023-01-31 2:00 ` Hal Feng
2023-01-31 6:17 ` Conor Dooley
2023-02-02 2:42 ` Hal Feng
2023-02-02 6:19 ` Conor Dooley
2022-12-20 1:12 ` [PATCH v3 7/7] riscv: dts: starfive: Add StarFive JH7110 VisionFive 2 board " Hal Feng
2022-12-20 21:26 ` Conor Dooley [this message]
2022-12-23 3:12 ` Hal Feng
2022-12-28 22:49 ` Conor Dooley
2023-01-10 17:59 ` Conor Dooley
2023-01-18 23:43 ` Conor Dooley
2023-02-14 9:53 ` Emil Renner Berthing
2023-02-15 14:03 ` Hal Feng
2023-02-16 9:27 ` Emil Renner Berthing
2023-02-16 9:50 ` Conor Dooley
2023-02-16 10:09 ` Conor Dooley
2023-02-16 10:32 ` Emil Renner Berthing
2023-02-16 12:27 ` Hal Feng
2023-02-16 13:02 ` Conor Dooley
2022-12-26 23:01 ` [PATCH v3 0/7] Basic device tree support for StarFive JH7110 RISC-V SoC Conor Dooley
2022-12-27 7:58 ` Krzysztof Kozlowski
2022-12-27 14:20 ` Conor Dooley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Y6Iob3csmKMl0rB/@spud \
--to=conor@kernel.org \
--cc=aou@eecs.berkeley.edu \
--cc=ben.dooks@sifive.com \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=emil.renner.berthing@canonical.com \
--cc=hal.feng@starfivetech.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=maz@kernel.org \
--cc=mturquette@baylibre.com \
--cc=p.zabel@pengutronix.de \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).