Re: [PATCH v3 0/3] Enable initial support for StarFive VisionFive V1 SBC

From: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
To: Conor Dooley <conor.dooley@microchip.com>
Cc: Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Paul Walmsley <paul.walmsley@sifive.com>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	Michael Zhu <michael.zhu@starfivetech.com>,
	Drew Fustini <drew@beagleboard.org>,
	Emil Renner Berthing <kernel@esmil.dk>,
	devicetree@vger.kernel.org, linux-riscv@lists.infradead.org,
	linux-kernel@vger.kernel.org, kernel@collabora.com
Subject: Re: [PATCH v3 0/3] Enable initial support for StarFive VisionFive V1 SBC
Date: Tue, 4 Oct 2022 13:15:58 +0300	[thread overview]
Message-ID: <b1139318-b87e-b257-28ba-e2b0c7596053@collabora.com> (raw)
In-Reply-To: <YzwCWDN4NyIQ8a46@wendy>

On 10/4/22 12:52, Conor Dooley wrote:
> On Mon, Oct 03, 2022 at 02:06:32PM +0300, Cristian Ciocaltea wrote:
>> Please let me know if there is anything else missing in order to get this
>> queued for merging.
> 
> Hey Cristian,
> 
> LinusW has applied a conflicting change for 6.1 as he renamed the
> pinctrl header that you have moved from one file to another in this
> patch [0]. Could you rebase once that lands upstream please?

Hi Conor,

Sure, I will rebase as soon as rc1 is out.

Thanks,
Cristian

> 
> Thanks,
> Conor.
> 
> 0 - https://lore.kernel.org/linux-riscv/CACRpkdZmmMjVwpHxkJP+Ui0XJgrdZx8kpVybifbwkRB1_uMhAg@mail.gmail.com/
> 
>>
>> Thanks,
>> Cristian
>>
>> On 9/8/22 17:29, Cristian Ciocaltea wrote:
>>> The StarFive VisionFive V1 SBC [1] is similar with the already supported
>>> BeagleV Starlight Beta board, both being based on the StarFive JH7100 SoC.
>>>
>>> In addition to documenting the necessary compatibles, this patch series
>>> moves most of the content from jh7100-beaglev-starlight.dts to a new file
>>> jh7100-common.dtsi, to be shared between the two boards.
>>>
>>> No other changes are required in order to successfully boot the board.
>>>
>>> [1] https://github.com/starfive-tech/VisionFive
>>>
>>> Changes in v3:
>>>    - Added Reviewed-by tag from Krzysztof in patch 1/3
>>>    - Optimized patch 2/3 by enabling copy detection on "git format-patch",
>>>      as indicated by Krzysztof
>>>
>>> Changes in v2:
>>>    - Simplified documentation by using 'enum' instead of 'const' in
>>>      patch 1/3, according to Conor's review
>>>    - Added Reviewed-by tags from Conor
>>>
>>> Cristian Ciocaltea (3):
>>>     dt-bindings: riscv: starfive: Add StarFive VisionFive V1 board
>>>     riscv: dts: starfive: Add common DT for JH7100 based boards
>>>     riscv: dts: starfive: Add StarFive VisionFive V1 device tree
>>>
>>>    .../devicetree/bindings/riscv/starfive.yaml   |   4 +-
>>>    arch/riscv/boot/dts/starfive/Makefile         |   2 +-
>>>    .../dts/starfive/jh7100-beaglev-starlight.dts | 153 +-----------------
>>>    ...aglev-starlight.dts => jh7100-common.dtsi} |   3 -
>>>    .../jh7100-starfive-visionfive-v1.dts         |  20 +++
>>>    5 files changed, 25 insertions(+), 157 deletions(-)
>>>    copy arch/riscv/boot/dts/starfive/{jh7100-beaglev-starlight.dts => jh7100-common.dtsi} (96%)
>>>    create mode 100644 arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts
>>>
>>
>> _______________________________________________
>> linux-riscv mailing list
>> linux-riscv@lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-riscv
>>

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv