Re: [PATCH v3 0/3] Enable initial support for StarFive VisionFive V1 SBC

From: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
To: Conor Dooley <conor.dooley@microchip.com>
Cc: Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Paul Walmsley <paul.walmsley@sifive.com>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	Michael Zhu <michael.zhu@starfivetech.com>,
	Drew Fustini <drew@beagleboard.org>,
	Emil Renner Berthing <kernel@esmil.dk>,
	devicetree@vger.kernel.org, linux-riscv@lists.infradead.org,
	linux-kernel@vger.kernel.org, kernel@collabora.com
Subject: Re: [PATCH v3 0/3] Enable initial support for StarFive VisionFive V1 SBC
Date: Tue, 18 Oct 2022 00:14:42 +0300	[thread overview]
Message-ID: <fd259c32-6a9d-7ab5-2172-3f2fe947ebfe@collabora.com> (raw)
In-Reply-To: <b1139318-b87e-b257-28ba-e2b0c7596053@collabora.com>

On 10/4/22 13:15, Cristian Ciocaltea wrote:
> On 10/4/22 12:52, Conor Dooley wrote:
>> On Mon, Oct 03, 2022 at 02:06:32PM +0300, Cristian Ciocaltea wrote:
>>> Please let me know if there is anything else missing in order to get 
>>> this
>>> queued for merging.
>>
>> Hey Cristian,
>>
>> LinusW has applied a conflicting change for 6.1 as he renamed the
>> pinctrl header that you have moved from one file to another in this
>> patch [0]. Could you rebase once that lands upstream please?
> 
> Hi Conor,
> 
> Sure, I will rebase as soon as rc1 is out.

I have submitted v4:

https://lore.kernel.org/all/20221017210542.979051-1-cristian.ciocaltea@collabora.com/

> Thanks,
> Cristian
> 
>>
>> Thanks,
>> Conor.
>>
>> 0 - 
>> https://lore.kernel.org/linux-riscv/CACRpkdZmmMjVwpHxkJP+Ui0XJgrdZx8kpVybifbwkRB1_uMhAg@mail.gmail.com/
>>
>>>
>>> Thanks,
>>> Cristian
>>>
>>> On 9/8/22 17:29, Cristian Ciocaltea wrote:
>>>> The StarFive VisionFive V1 SBC [1] is similar with the already 
>>>> supported
>>>> BeagleV Starlight Beta board, both being based on the StarFive 
>>>> JH7100 SoC.
>>>>
>>>> In addition to documenting the necessary compatibles, this patch series
>>>> moves most of the content from jh7100-beaglev-starlight.dts to a new 
>>>> file
>>>> jh7100-common.dtsi, to be shared between the two boards.
>>>>
>>>> No other changes are required in order to successfully boot the board.
>>>>
>>>> [1] https://github.com/starfive-tech/VisionFive
>>>>
>>>> Changes in v3:
>>>>    - Added Reviewed-by tag from Krzysztof in patch 1/3
>>>>    - Optimized patch 2/3 by enabling copy detection on "git 
>>>> format-patch",
>>>>      as indicated by Krzysztof
>>>>
>>>> Changes in v2:
>>>>    - Simplified documentation by using 'enum' instead of 'const' in
>>>>      patch 1/3, according to Conor's review
>>>>    - Added Reviewed-by tags from Conor
>>>>
>>>> Cristian Ciocaltea (3):
>>>>     dt-bindings: riscv: starfive: Add StarFive VisionFive V1 board
>>>>     riscv: dts: starfive: Add common DT for JH7100 based boards
>>>>     riscv: dts: starfive: Add StarFive VisionFive V1 device tree
>>>>
>>>>    .../devicetree/bindings/riscv/starfive.yaml   |   4 +-
>>>>    arch/riscv/boot/dts/starfive/Makefile         |   2 +-
>>>>    .../dts/starfive/jh7100-beaglev-starlight.dts | 153 
>>>> +-----------------
>>>>    ...aglev-starlight.dts => jh7100-common.dtsi} |   3 -
>>>>    .../jh7100-starfive-visionfive-v1.dts         |  20 +++
>>>>    5 files changed, 25 insertions(+), 157 deletions(-)
>>>>    copy arch/riscv/boot/dts/starfive/{jh7100-beaglev-starlight.dts 
>>>> => jh7100-common.dtsi} (96%)
>>>>    create mode 100644 
>>>> arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts
>>>>
>>>
>>> _______________________________________________
>>> linux-riscv mailing list
>>> linux-riscv@lists.infradead.org
>>> http://lists.infradead.org/mailman/listinfo/linux-riscv
>>>

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv