linux-rockchip.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
To: Kever Yang <kever.yang-TNX95d0MmH7DzftRWevZcw@public.gmane.org>,
	Simon Glass <sjg-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>,
	Philipp Tomsich
	<philipp.tomsich-SN7IsUiht6C/RdPyistoZJqQE7yCjDx5@public.gmane.org>
Cc: linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	u-boot-0aAXYlwwYIKGBzrmiIFOJg@public.gmane.org,
	"Matwey V . Kornilov"
	<matwey.kornilov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	Jagan Teki
	<jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>,
	linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org,
	Akash Gajjar <akash-oRp2ZoJdM/RWk0Htik3J/w@public.gmane.org>
Subject: [PATCH v5 6/7] rockchip: Add Single boot image (with binman, pad_cat)
Date: Mon, 30 Dec 2019 13:58:18 +0530	[thread overview]
Message-ID: <20191230082819.30191-7-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20191230082819.30191-1-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>

All rockchip platforms support TPL or SPL-based bootloader
in mainline with U-Boot proper as final stage. For each
stage we need to burn the image on to flash with respective
offsets.

This patch creates a single boot image component using
- binman, for arm32 rockchip platforms
- pad_cat, for arm64 rockchip platforms.

This would help users to get rid of burning different
boot stage images.

The new image called 'u-boot-rockchip.bin'
which can burn into flash like:

₹ sudo dd if=u-boot-rockchip.bin of=/dev/sda seek=64

This would support all rockchip platforms, except rk3128
since it doesn't support for SPL yet.

Cc: Kever Yang <kever.yang@rock-chips.com>
Cc: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
---
 Makefile                          | 18 ++++++++++++++----
 arch/arm/Kconfig                  |  1 +
 arch/arm/dts/rk3036-u-boot.dtsi   |  2 ++
 arch/arm/dts/rk3288-u-boot.dtsi   |  2 ++
 arch/arm/dts/rockchip-u-boot.dtsi | 21 +++++++++++++++++++++
 include/configs/rockchip-common.h |  2 ++
 6 files changed, 42 insertions(+), 4 deletions(-)
 create mode 100644 arch/arm/dts/rockchip-u-boot.dtsi

diff --git a/Makefile b/Makefile
index b48693e560..d5b6c45c89 100644
--- a/Makefile
+++ b/Makefile
@@ -909,7 +909,7 @@ ALL-y += u-boot-with-dtb.bin
 endif
 
 ifeq ($(CONFIG_ARCH_ROCKCHIP)$(CONFIG_SPL),yy)
-ALL-y += u-boot-spl-rockchip.bin
+ALL-y += u-boot-rockchip.bin
 endif
 
 LDFLAGS_u-boot += $(LDFLAGS_FINAL)
@@ -1387,15 +1387,25 @@ ifeq ($(CONFIG_SPL)$(CONFIG_TPL),yy)
 MKIMAGEFLAGS_u-boot-tpl-rockchip.bin = -n $(CONFIG_SYS_SOC) -T $(ROCKCHIP_IMG_TYPE)
 tpl/u-boot-tpl-rockchip.bin: tpl/u-boot-tpl.bin FORCE
 	$(call if_changed,mkimage)
-u-boot-spl-rockchip.bin: tpl/u-boot-tpl-rockchip.bin spl/u-boot-spl.bin FORCE
+spl/u-boot-spl-rockchip.bin: tpl/u-boot-tpl-rockchip.bin spl/u-boot-spl.bin FORCE
 	$(call if_changed,cat)
 else
 MKIMAGEFLAGS_u-boot-spl-rockchip.bin = -n $(CONFIG_SYS_SOC) -T $(ROCKCHIP_IMG_TYPE)
-u-boot-spl-rockchip.bin: spl/u-boot-spl.bin FORCE
+spl/u-boot-spl-rockchip.bin: spl/u-boot-spl.bin FORCE
 	$(call if_changed,mkimage)
 endif
 
-endif
+ifeq ($(CONFIG_ARM64),)
+u-boot-rockchip.bin: spl/u-boot-spl-rockchip.bin u-boot.img FORCE
+	$(call if_changed,binman)
+else
+OBJCOPYFLAGS_u-boot-rockchip.bin = -I binary -O binary \
+	--pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff
+u-boot-rockchip.bin: spl/u-boot-spl-rockchip.bin u-boot.itb FORCE
+	$(call if_changed,pad_cat)
+endif # CONFIG_ARM64
+
+endif # CONFIG_ARCH_ROCKCHIP
 
 ifeq ($(CONFIG_ARCH_LPC32XX)$(CONFIG_SPL),yy)
 MKIMAGEFLAGS_lpc32xx-spl.img = -T lpc32xximage -a $(CONFIG_SPL_TEXT_BASE)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index f9dab073ea..7bd99ba3bb 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1590,6 +1590,7 @@ config ARCH_STM32MP
 config ARCH_ROCKCHIP
 	bool "Support Rockchip SoCs"
 	select BLK
+	select BINMAN if !ARM64
 	select DM
 	select DM_GPIO
 	select DM_I2C
diff --git a/arch/arm/dts/rk3036-u-boot.dtsi b/arch/arm/dts/rk3036-u-boot.dtsi
index 1e7d079315..41ac054b81 100644
--- a/arch/arm/dts/rk3036-u-boot.dtsi
+++ b/arch/arm/dts/rk3036-u-boot.dtsi
@@ -2,3 +2,5 @@
 /*
  * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
  */
+
+#include "rockchip-u-boot.dtsi"
diff --git a/arch/arm/dts/rk3288-u-boot.dtsi b/arch/arm/dts/rk3288-u-boot.dtsi
index 3f00a3b6d3..6d31735362 100644
--- a/arch/arm/dts/rk3288-u-boot.dtsi
+++ b/arch/arm/dts/rk3288-u-boot.dtsi
@@ -3,6 +3,8 @@
  * Copyright (C) 2019 Rockchip Electronics Co., Ltd
  */
 
+#include "rockchip-u-boot.dtsi"
+
 / {
 	chosen {
 		u-boot,spl-boot-order = \
diff --git a/arch/arm/dts/rockchip-u-boot.dtsi b/arch/arm/dts/rockchip-u-boot.dtsi
new file mode 100644
index 0000000000..bc0b1412a2
--- /dev/null
+++ b/arch/arm/dts/rockchip-u-boot.dtsi
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include <config.h>
+
+/ {
+	binman {
+		filename = "u-boot-rockchip.bin";
+		pad-byte = <0xff>;
+
+		blob {
+			filename = "spl/u-boot-spl-rockchip.bin";
+		};
+
+		u-boot-img {
+			offset = <CONFIG_SPL_PAD_TO>;
+		};
+	};
+};
diff --git a/include/configs/rockchip-common.h b/include/configs/rockchip-common.h
index 68e1105a4b..d7f5ca9fa4 100644
--- a/include/configs/rockchip-common.h
+++ b/include/configs/rockchip-common.h
@@ -9,6 +9,8 @@
 
 #define CONFIG_SYS_NS16550_MEM32
 
+#define CONFIG_SPL_PAD_TO		8355840
+
 #ifndef CONFIG_SPL_BUILD
 
 /* First try to boot from SD (index 0), then eMMC (index 1) */
-- 
2.18.0.321.gffc6fa0e3


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

  parent reply	other threads:[~2019-12-30  8:28 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-30  8:28 [PATCH v5 0/7] rockchip: Add Binman support Jagan Teki
     [not found] ` <20191230082819.30191-1-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-12-30  8:28   ` [PATCH v5 1/7] Makefile: Add rockchip image type Jagan Teki
2019-12-30  8:28   ` [PATCH v5 2/7] Makefile: rockchip: Suffix platform type with tpl name Jagan Teki
2019-12-30  8:28   ` [PATCH v5 3/7] Makefile: rockchip: Support SPL-alone mkimage Jagan Teki
2019-12-30  8:28   ` [PATCH v5 4/7] Makefile: rockchip: Use u-boot preferred spl name Jagan Teki
2019-12-30  8:28   ` [PATCH v5 5/7] arm: dts: rk3036: Add rk3036-u-boot.dtsi Jagan Teki
2019-12-30  8:28   ` Jagan Teki [this message]
2019-12-31  7:54     ` [PATCH v5 6/7] rockchip: Add Single boot image (with binman, pad_cat) Matwey V. Kornilov
2019-12-31  8:04       ` Matwey V. Kornilov
     [not found]         ` <CAJs94EZgpHmkHAfDQUH_mqW82Jw_QJWiJgx_8Uny1ru1WfbrHw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2020-01-03 17:35           ` Jagan Teki
2019-12-30  8:28   ` [PATCH v5 7/7] doc: boards: Add rockchip documentation Jagan Teki
2019-12-30  8:41     ` Matwey V. Kornilov
     [not found]       ` <CAJs94EYBrwf9Pt0R-_OypT-JHWGFpZYxRhKcUXWgXTFJi9O0HA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2019-12-30  8:59         ` Jagan Teki
2019-12-31  7:50           ` Matwey V. Kornilov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191230082819.30191-7-jagan@amarulasolutions.com \
    --to=jagan-dyjbcgdgk7pe9whmmfpqlfatqe2ktcn/@public.gmane.org \
    --cc=akash-oRp2ZoJdM/RWk0Htik3J/w@public.gmane.org \
    --cc=kever.yang-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
    --cc=linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org \
    --cc=linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=matwey.kornilov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=philipp.tomsich-SN7IsUiht6C/RdPyistoZJqQE7yCjDx5@public.gmane.org \
    --cc=sjg-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
    --cc=u-boot-0aAXYlwwYIKGBzrmiIFOJg@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).