* [PATCH v3 1/8] arm64: dts: rockchip: px30: Add Engicam EDIMM2.2 Starter Kit
2020-09-30 13:16 [PATCH v3 0/8] rockchip: Add Engicam PX30.Core support Jagan Teki
@ 2020-09-30 13:16 ` Jagan Teki
2020-09-30 13:16 ` [PATCH v3 2/8] arm64: dts: rockchip: Add Engicam PX30.Core SOM Jagan Teki
` (6 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Jagan Teki @ 2020-09-30 13:16 UTC (permalink / raw)
To: kever.yang, philipp.tomsich, sjg
Cc: linux-rockchip, u-boot, Jagan Teki, sunil, Michael Trimarchi,
linux-amarula
Engicam EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive
Evaluation Board.
Genaral features:
- LCD 7" C.Touch
- microSD slot
- Ethernet 1Gb
- Wifi/BT
- 2x LVDS Full HD interfaces
- 3x USB 2.0
- 1x USB 3.0
- HDMI Out
- Mini PCIe
- MIPI CSI
- 2x CAN
- Audio Out
SOM's like PX30.Core needs to mount on top of this Evaluation board
for creating complete PX30.Core EDIMM2.2 Starter Kit.
Add support for it.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
---
Changes for v3:
- none
Changes for v2:
- Minor device tree adjustments as per Linux mainline changes
- Add Michael Trimarchi as one of the contributors
- collect Kever Yang r-b tag
- Add additional copyright
arch/arm/dts/px30-engicam-common.dtsi | 39 +++++++++++++++++++++++++
arch/arm/dts/px30-engicam-edimm2.2.dtsi | 7 +++++
2 files changed, 46 insertions(+)
create mode 100644 arch/arm/dts/px30-engicam-common.dtsi
create mode 100644 arch/arm/dts/px30-engicam-edimm2.2.dtsi
diff --git a/arch/arm/dts/px30-engicam-common.dtsi b/arch/arm/dts/px30-engicam-common.dtsi
new file mode 100644
index 0000000000..bd5bde989e
--- /dev/null
+++ b/arch/arm/dts/px30-engicam-common.dtsi
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+/ {
+ vcc5v0_sys: vcc5v0-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys"; /* +5V */
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+};
+
+&gmac {
+ clock_in_out = "output";
+ phy-supply = <&vcc_3v3>; /* +3V3_SOM */
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 50000 50000>;
+ snps,reset-gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&sdmmc {
+ cap-sd-highspeed;
+ card-detect-delay = <800>;
+ vmmc-supply = <&vcc_3v3>; /* +3V3_SOM */
+ vqmmc-supply = <&vcc_3v3>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-0 = <&uart2m1_xfer>;
+ status = "okay";
+};
diff --git a/arch/arm/dts/px30-engicam-edimm2.2.dtsi b/arch/arm/dts/px30-engicam-edimm2.2.dtsi
new file mode 100644
index 0000000000..cb00988953
--- /dev/null
+++ b/arch/arm/dts/px30-engicam-edimm2.2.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+#include "px30-engicam-common.dtsi"
--
2.25.1
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH v3 2/8] arm64: dts: rockchip: Add Engicam PX30.Core SOM
2020-09-30 13:16 [PATCH v3 0/8] rockchip: Add Engicam PX30.Core support Jagan Teki
2020-09-30 13:16 ` [PATCH v3 1/8] arm64: dts: rockchip: px30: Add Engicam EDIMM2.2 Starter Kit Jagan Teki
@ 2020-09-30 13:16 ` Jagan Teki
2020-09-30 13:16 ` [PATCH v3 3/8] rockchip: px30: Add EVB_PX30 Kconfig help Jagan Teki
` (5 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Jagan Teki @ 2020-09-30 13:16 UTC (permalink / raw)
To: kever.yang, philipp.tomsich, sjg
Cc: linux-rockchip, u-boot, Jagan Teki, sunil, Michael Trimarchi,
linux-amarula
From: Michael Trimarchi <michael@amarulasolutions.com>
PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.
General features:
- Rockchip PX30
- Up to 2GB DDR4
- eMMC 4 GB expandible
- rest of PX30 features
PX30.Core needs to mount on top of Engicam baseboards for creating
complete platform boards.
Possible baseboards are,
- EDIMM2.2
- C.TOUCH 2.0
Add support for it.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
---
Changes for v3:
- none
Changes for v2:
- Minor device tree adjustments as per Linux mainline changes
- Add Michael Trimarchi as one of the contributors
- collect Kever Yang r-b tag
- Add additional copyright
arch/arm/dts/px30-px30-core.dtsi | 232 +++++++++++++++++++++++++++++++
1 file changed, 232 insertions(+)
create mode 100644 arch/arm/dts/px30-px30-core.dtsi
diff --git a/arch/arm/dts/px30-px30-core.dtsi b/arch/arm/dts/px30-px30-core.dtsi
new file mode 100644
index 0000000000..16e6cf28a4
--- /dev/null
+++ b/arch/arm/dts/px30-px30-core.dtsi
@@ -0,0 +1,232 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutons
+ * Copyright (c) 2020 Amarula Solutons(India)
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+
+/ {
+ compatible = "engicam,px30-px30-core", "rockchip,px30";
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&emmc {
+ cap-mmc-highspeed;
+ mmc-hs200-1_8v;
+ non-removable;
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ rk809: pmic@20 {
+ compatible = "rockchip,rk809";
+ reg = <0x20>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int>;
+ rockchip,system-power-controller;
+ wakeup-source;
+ #clock-cells = <1>;
+ clock-output-names = "rk808-clkout1", "rk808-clkout2";
+
+ vcc1-supply = <&vcc5v0_sys>;
+ vcc2-supply = <&vcc5v0_sys>;
+ vcc3-supply = <&vcc5v0_sys>;
+ vcc4-supply = <&vcc5v0_sys>;
+ vcc5-supply = <&vcc3v3_sys>;
+ vcc6-supply = <&vcc3v3_sys>;
+ vcc7-supply = <&vcc3v3_sys>;
+ vcc8-supply = <&vcc3v3_sys>;
+ vcc9-supply = <&vcc5v0_sys>;
+
+ regulators {
+ vdd_log: DCDC_REG1 {
+ regulator-name = "vdd_log";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <950000>;
+ };
+ };
+
+ vdd_arm: DCDC_REG2 {
+ regulator-name = "vdd_arm";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <950000>;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_3v3: DCDC_REG4 {
+ regulator-name = "vcc_3v3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc3v3_sys: DCDC_REG5 {
+ regulator-name = "vcc3v3_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_1v0: LDO_REG1 {
+ regulator-name = "vcc_1v0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vcc_1v8: LDO_REG2 {
+ regulator-name = "vcc_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vdd_1v0: LDO_REG3 {
+ regulator-name = "vdd_1v0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vcc3v0_pmu: LDO_REG4 {
+ regulator-name = "vcc3v0_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+
+ };
+ };
+
+ vccio_sd: LDO_REG5 {
+ regulator-name = "vccio_sd";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc5v0_host: SWITCH_REG2 {
+ regulator-name = "vcc5v0_host";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
+};
+
+&io_domains {
+ vccio1-supply = <&vcc_3v3>;
+ vccio2-supply = <&vcc_3v3>;
+ vccio3-supply = <&vcc_3v3>;
+ vccio4-supply = <&vcc_3v3>;
+ vccio5-supply = <&vcc_3v3>;
+ vccio6-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&pinctrl {
+ pmic {
+ pmic_int: pmic_int {
+ rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+};
+
+&pmu_io_domains {
+ pmuio1-supply = <&vcc_3v3>;
+ pmuio2-supply = <&vcc_3v3>;
+ status = "okay";
+};
+
+&tsadc {
+ rockchip,hw-tshut-mode = <1>;
+ rockchip,hw-tshut-polarity = <1>;
+ status = "okay";
+};
--
2.25.1
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH v3 3/8] rockchip: px30: Add EVB_PX30 Kconfig help
2020-09-30 13:16 [PATCH v3 0/8] rockchip: Add Engicam PX30.Core support Jagan Teki
2020-09-30 13:16 ` [PATCH v3 1/8] arm64: dts: rockchip: px30: Add Engicam EDIMM2.2 Starter Kit Jagan Teki
2020-09-30 13:16 ` [PATCH v3 2/8] arm64: dts: rockchip: Add Engicam PX30.Core SOM Jagan Teki
@ 2020-09-30 13:16 ` Jagan Teki
2020-09-30 13:16 ` [PATCH v3 4/8] board: engicam: Attach i.MX6 common code Jagan Teki
` (4 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Jagan Teki @ 2020-09-30 13:16 UTC (permalink / raw)
To: kever.yang, philipp.tomsich, sjg
Cc: u-boot, linux-rockchip, linux-amarula, Jagan Teki, sunil
TARGET_EVB_PX30 can be possible to use other px30 boards.
Add the help text for existing EVB, so-that the new boards
which are resuing this config option can mention their board
help text.
This would help to track which boards are using EVB_PX30 config.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
---
Changes for v3:
- none
Changes for v2:
- Collect Kever Yang r-b tag
arch/arm/mach-rockchip/px30/Kconfig | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/mach-rockchip/px30/Kconfig b/arch/arm/mach-rockchip/px30/Kconfig
index f5373c6f9f..6cd65dfa97 100644
--- a/arch/arm/mach-rockchip/px30/Kconfig
+++ b/arch/arm/mach-rockchip/px30/Kconfig
@@ -2,6 +2,11 @@ if ROCKCHIP_PX30
config TARGET_EVB_PX30
bool "EVB_PX30"
+ help
+ This target config option used for below listed px30 boards.
+
+ EVB_PX30:
+ * EVB_PX30 is an evaluation board for Rockchip PX30.
config TARGET_ODROID_GO2
bool "ODROID_GO2"
--
2.25.1
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH v3 4/8] board: engicam: Attach i.MX6 common code
2020-09-30 13:16 [PATCH v3 0/8] rockchip: Add Engicam PX30.Core support Jagan Teki
` (2 preceding siblings ...)
2020-09-30 13:16 ` [PATCH v3 3/8] rockchip: px30: Add EVB_PX30 Kconfig help Jagan Teki
@ 2020-09-30 13:16 ` Jagan Teki
2020-09-30 13:16 ` [PATCH v3 5/8] rockchip: Add Engicam PX30.Core EDIMM2.2 Starter Kit Jagan Teki
` (3 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Jagan Teki @ 2020-09-30 13:16 UTC (permalink / raw)
To: kever.yang, philipp.tomsich, sjg
Cc: linux-rockchip, u-boot, Jagan Teki, sunil, linux-amarula, Stefano Babic
The existing common code for Engicam boards uses i.MX6,
so attach that into i.MX6 Engicam boards so-that adding
new SoC variants of Engicam boards become meaningful.
Add support for it.
Cc: Stefano Babic <sbabic@denx.de>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v3:
- new patch
board/engicam/common/Kconfig | 8 ++++++++
board/engicam/common/Makefile | 7 +++++--
board/engicam/imx6q/Kconfig | 2 ++
board/engicam/imx6ul/Kconfig | 2 ++
4 files changed, 17 insertions(+), 2 deletions(-)
create mode 100644 board/engicam/common/Kconfig
diff --git a/board/engicam/common/Kconfig b/board/engicam/common/Kconfig
new file mode 100644
index 0000000000..38328fd5ea
--- /dev/null
+++ b/board/engicam/common/Kconfig
@@ -0,0 +1,8 @@
+config IMX6_ENGICAM_COMMON
+ bool "Engicam i.MX6 Common code"
+ depends on SPL && MX6
+ default y if TARGET_MX6Q_ENGICAM || TARGET_MX6UL_ENGICAM
+ help
+ Common SPL and U-Boot proper code for Engicam i.MX6 targets.
+
+ Enable it in board Kconfig if it uses i.MX6 variant Engicam boards.
diff --git a/board/engicam/common/Makefile b/board/engicam/common/Makefile
index b392bf6cb1..15f0eaa1ec 100644
--- a/board/engicam/common/Makefile
+++ b/board/engicam/common/Makefile
@@ -1,5 +1,8 @@
# SPDX-License-Identifier: GPL-2.0+
# Copyright (C) 2016 Amarula Solutions B.V.
-obj-y := board.o
-obj-$(CONFIG_SPL_BUILD) += spl.o
+ifdef CONFIG_SPL_BUILD
+obj-$(CONFIG_IMX6_ENGICAM_COMMON) += spl.o
+else
+obj-$(CONFIG_IMX6_ENGICAM_COMMON) += board.o
+endif
diff --git a/board/engicam/imx6q/Kconfig b/board/engicam/imx6q/Kconfig
index 48eb60c09a..fab8da0e73 100644
--- a/board/engicam/imx6q/Kconfig
+++ b/board/engicam/imx6q/Kconfig
@@ -9,4 +9,6 @@ config SYS_VENDOR
config SYS_CONFIG_NAME
default "imx6-engicam"
+source "board/engicam/common/Kconfig"
+
endif
diff --git a/board/engicam/imx6ul/Kconfig b/board/engicam/imx6ul/Kconfig
index e91dd15970..58f25d0623 100644
--- a/board/engicam/imx6ul/Kconfig
+++ b/board/engicam/imx6ul/Kconfig
@@ -9,4 +9,6 @@ config SYS_VENDOR
config SYS_CONFIG_NAME
default "imx6-engicam"
+source "board/engicam/common/Kconfig"
+
endif
--
2.25.1
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH v3 5/8] rockchip: Add Engicam PX30.Core EDIMM2.2 Starter Kit
2020-09-30 13:16 [PATCH v3 0/8] rockchip: Add Engicam PX30.Core support Jagan Teki
` (3 preceding siblings ...)
2020-09-30 13:16 ` [PATCH v3 4/8] board: engicam: Attach i.MX6 common code Jagan Teki
@ 2020-09-30 13:16 ` Jagan Teki
2020-09-30 13:16 ` [PATCH v3 6/8] arm64: dts: rockchip: px30: Add Engicam C.TOUCH 2.0 Jagan Teki
` (2 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Jagan Teki @ 2020-09-30 13:16 UTC (permalink / raw)
To: kever.yang, philipp.tomsich, sjg
Cc: u-boot, linux-rockchip, linux-amarula, Jagan Teki, sunil
PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.
EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive
Evaluation Board from Engicam.
PX30.Core needs to mount on top of this Evaluation board for
creating complete PX30.Core EDIMM2.2 Starter Kit.
Add support for it.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
---
Changes for v3:
- Changes to work TPL
Changes for v2:
- Collect Kever Yang r-b tag
arch/arm/dts/Makefile | 1 +
arch/arm/dts/px30-px30-core-edimm2.2.dts | 21 +++++
arch/arm/mach-rockchip/px30/Kconfig | 10 ++
board/engicam/px30_core/Kconfig | 15 +++
board/engicam/px30_core/MAINTAINERS | 7 ++
board/engicam/px30_core/Makefile | 7 ++
board/engicam/px30_core/px30_core.c | 4 +
configs/px30-core-edimm2.2-px30_defconfig | 108 ++++++++++++++++++++++
drivers/ram/rockchip/sdram_px30.c | 4 +
include/configs/px30_core.h | 15 +++
10 files changed, 192 insertions(+)
create mode 100644 arch/arm/dts/px30-px30-core-edimm2.2.dts
create mode 100644 board/engicam/px30_core/Kconfig
create mode 100644 board/engicam/px30_core/MAINTAINERS
create mode 100644 board/engicam/px30_core/Makefile
create mode 100644 board/engicam/px30_core/px30_core.c
create mode 100644 configs/px30-core-edimm2.2-px30_defconfig
create mode 100644 include/configs/px30_core.h
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index f8f529435b..f1b0286fa1 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -72,6 +72,7 @@ dtb-$(CONFIG_MACH_S700) += \
dtb-$(CONFIG_ROCKCHIP_PX30) += \
px30-evb.dtb \
px30-firefly.dtb \
+ px30-px30-core-edimm2.2.dtb \
rk3326-odroid-go2.dtb
dtb-$(CONFIG_ROCKCHIP_RK3036) += \
diff --git a/arch/arm/dts/px30-px30-core-edimm2.2.dts b/arch/arm/dts/px30-px30-core-edimm2.2.dts
new file mode 100644
index 0000000000..c36280ce7f
--- /dev/null
+++ b/arch/arm/dts/px30-px30-core-edimm2.2.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+#include "px30.dtsi"
+#include "px30-engicam-edimm2.2.dtsi"
+#include "px30-px30-core.dtsi"
+
+/ {
+ model = "Engicam PX30.Core EDIMM2.2 Starter Kit";
+ compatible = "engicam,px30-core-edimm2.2", "engicam,px30-px30-core",
+ "rockchip,px30";
+
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+};
diff --git a/arch/arm/mach-rockchip/px30/Kconfig b/arch/arm/mach-rockchip/px30/Kconfig
index 6cd65dfa97..5d014f6561 100644
--- a/arch/arm/mach-rockchip/px30/Kconfig
+++ b/arch/arm/mach-rockchip/px30/Kconfig
@@ -11,6 +11,15 @@ config TARGET_EVB_PX30
config TARGET_ODROID_GO2
bool "ODROID_GO2"
+config TARGET_PX30_CORE
+ bool "Engicam PX30.Core"
+ help
+ PX30.Core EDIMM2.2:
+ * PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.
+ * EDIMM2.2 is a Form Factor Capacitive Evaluation Board from Engicam.
+ * PX30.Core needs to mount on top of EDIMM2.2 for creating complete
+ PX30.Core EDIMM2.2 Starter Kit.
+
config ROCKCHIP_BOOT_MODE_REG
default 0xff010200
@@ -44,6 +53,7 @@ config DEBUG_UART_CHANNEL
For using the UART for early debugging the route to use needs
to be declared (0 or 1).
+source "board/engicam/px30_core/Kconfig"
source "board/hardkernel/odroid_go2/Kconfig"
source "board/rockchip/evb_px30/Kconfig"
diff --git a/board/engicam/px30_core/Kconfig b/board/engicam/px30_core/Kconfig
new file mode 100644
index 0000000000..0158398200
--- /dev/null
+++ b/board/engicam/px30_core/Kconfig
@@ -0,0 +1,15 @@
+if TARGET_PX30_CORE
+
+config SYS_BOARD
+ default "px30_core"
+
+config SYS_VENDOR
+ default "engicam"
+
+config SYS_CONFIG_NAME
+ default "px30_core"
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+ def_bool y
+
+endif
diff --git a/board/engicam/px30_core/MAINTAINERS b/board/engicam/px30_core/MAINTAINERS
new file mode 100644
index 0000000000..f98a84450a
--- /dev/null
+++ b/board/engicam/px30_core/MAINTAINERS
@@ -0,0 +1,7 @@
+PX30-Core-EDIMM2.2
+M: Jagan Teki <jagan@amarulasolutions.com>
+M: Suniel Mahesh <sunil@amarulasolutions.com>
+S: Maintained
+F: board/engicam/px30_core
+F: include/configs/px30_core.h
+F: configs/px30-core-edimm2.2-px30_defconfig
diff --git a/board/engicam/px30_core/Makefile b/board/engicam/px30_core/Makefile
new file mode 100644
index 0000000000..321fdb0173
--- /dev/null
+++ b/board/engicam/px30_core/Makefile
@@ -0,0 +1,7 @@
+#
+# Copyright (c) 2020 Amarula Solutions(India)
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += px30_core.o
diff --git a/board/engicam/px30_core/px30_core.c b/board/engicam/px30_core/px30_core.c
new file mode 100644
index 0000000000..3adc2f11de
--- /dev/null
+++ b/board/engicam/px30_core/px30_core.c
@@ -0,0 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
diff --git a/configs/px30-core-edimm2.2-px30_defconfig b/configs/px30-core-edimm2.2-px30_defconfig
new file mode 100644
index 0000000000..50a9a150c8
--- /dev/null
+++ b/configs/px30-core-edimm2.2-px30_defconfig
@@ -0,0 +1,108 @@
+CONFIG_ARM=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SYS_TEXT_BASE=0x00200000
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_SPL_TEXT_BASE=0x00000000
+CONFIG_ROCKCHIP_PX30=y
+CONFIG_TARGET_PX30_CORE=y
+CONFIG_DEBUG_UART_CHANNEL=1
+CONFIG_TPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_SPL_STACK_R_ADDR=0x600000
+CONFIG_DEBUG_UART_BASE=0xFF160000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_DEFAULT_DEVICE_TREE="px30-px30-core-edimm2.2"
+CONFIG_DEBUG_UART=y
+CONFIG_TPL_SYS_MALLOC_F_LEN=0x600
+# CONFIG_ANDROID_BOOT_IMAGE is not set
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SPL_LOAD_FIT=y
+# CONFIG_CONSOLE_MUX is not set
+CONFIG_DEFAULT_FDT_FILE="rockchip/px30-px30-core-edimm2.2.dtb"
+CONFIG_MISC_INIT_R=y
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_BOOTROM_SUPPORT=y
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+CONFIG_SPL_STACK_R=y
+# CONFIG_TPL_BANNER_PRINT is not set
+CONFIG_SPL_CRC32_SUPPORT=y
+CONFIG_SPL_ATF=y
+# CONFIG_TPL_FRAMEWORK is not set
+# CONFIG_CMD_BOOTD is not set
+# CONFIG_CMD_ELF is not set
+# CONFIG_CMD_IMI is not set
+# CONFIG_CMD_XIMG is not set
+# CONFIG_CMD_LZMADEC is not set
+# CONFIG_CMD_UNZIP is not set
+CONFIG_CMD_GPT=y
+# CONFIG_CMD_LOADB is not set
+# CONFIG_CMD_LOADS is not set
+CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+# CONFIG_CMD_ITEST is not set
+# CONFIG_CMD_SETEXPR is not set
+# CONFIG_CMD_MISC is not set
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_ISO_PARTITION is not set
+CONFIG_EFI_PARTITION_ENTRIES_NUMBERS=64
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_LIVE=y
+CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_REGMAP=y
+CONFIG_SPL_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_SPL_SYSCON=y
+CONFIG_CLK=y
+CONFIG_SPL_CLK=y
+CONFIG_FASTBOOT_BUF_ADDR=0x800800
+CONFIG_FASTBOOT_BUF_SIZE=0x04000000
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_MISC=y
+CONFIG_ROCKCHIP_OTP=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_PHY_REALTEK=y
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_GMAC_ROCKCHIP=y
+CONFIG_PINCTRL=y
+CONFIG_DM_PMIC=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_REGULATOR_PWM=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_RAM=y
+CONFIG_SPL_RAM=y
+CONFIG_TPL_RAM=y
+CONFIG_ROCKCHIP_SDRAM_COMMON=y
+CONFIG_DM_RESET=y
+CONFIG_DM_RNG=y
+CONFIG_RNG_ROCKCHIP=y
+# CONFIG_SPECIFY_CONSOLE_INDEX is not set
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_DEBUG_UART_SKIP_INIT=y
+CONFIG_SOUND=y
+CONFIG_SYSRESET=y
+CONFIG_DM_THERMAL=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DWC2_OTG=y
+CONFIG_DM_VIDEO=y
+CONFIG_DISPLAY=y
+CONFIG_LCD=y
+CONFIG_SPL_TINY_MEMSET=y
+CONFIG_TPL_TINY_MEMSET=y
+CONFIG_LZO=y
+CONFIG_ERRNO_STR=y
diff --git a/drivers/ram/rockchip/sdram_px30.c b/drivers/ram/rockchip/sdram_px30.c
index fd5763d0a0..13a343d028 100644
--- a/drivers/ram/rockchip/sdram_px30.c
+++ b/drivers/ram/rockchip/sdram_px30.c
@@ -125,7 +125,11 @@ u32 addrmap[][8] = {
struct dram_info dram_info;
struct px30_sdram_params sdram_configs[] = {
+#ifdef CONFIG_TARGET_PX30_CORE
+#include "sdram-px30-ddr4-detect-333.inc"
+#else
#include "sdram-px30-ddr3-detect-333.inc"
+#endif
};
struct ddr_phy_skew skew = {
diff --git a/include/configs/px30_core.h b/include/configs/px30_core.h
new file mode 100644
index 0000000000..01b4995598
--- /dev/null
+++ b/include/configs/px30_core.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+#ifndef __PX30_CORE_H
+#define __PX30_CORE_H
+
+#include <configs/px30_common.h>
+
+#define ROCKCHIP_DEVICE_SETTINGS \
+ "stdout=serial,vidconsole\0" \
+ "stderr=serial,vidconsole\0"
+
+#endif /* __PX30_CORE_H */
--
2.25.1
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH v3 6/8] arm64: dts: rockchip: px30: Add Engicam C.TOUCH 2.0
2020-09-30 13:16 [PATCH v3 0/8] rockchip: Add Engicam PX30.Core support Jagan Teki
` (4 preceding siblings ...)
2020-09-30 13:16 ` [PATCH v3 5/8] rockchip: Add Engicam PX30.Core EDIMM2.2 Starter Kit Jagan Teki
@ 2020-09-30 13:16 ` Jagan Teki
2020-09-30 13:16 ` [PATCH v3 7/8] rockchip: Add Engicam PX30.Core " Jagan Teki
2020-09-30 13:16 ` [PATCH v3 8/8] doc: rockchip: Document Rockchip miniloader flashing Jagan Teki
7 siblings, 0 replies; 9+ messages in thread
From: Jagan Teki @ 2020-09-30 13:16 UTC (permalink / raw)
To: kever.yang, philipp.tomsich, sjg
Cc: linux-rockchip, u-boot, Jagan Teki, sunil, Michael Trimarchi,
linux-amarula
Engicam C.TOUCH 2.0 is an EDIMM compliant general purpose
carrier board with capacitive touch interface.
Genaral features:
- TFT 10.1" industrial, 1280x800 LVDS display
- Ethernet 10/100
- Wifi/BT
- USB Type A/OTG
- Audio Out
- CAN
- LVDS panel connector
SOM's like PX30.Core needs to mount on top of this Carrier board
for creating complete PX30.Core C.TOUCH 2.0 board.
Add support for it.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
---
Changes for v3:
- changes to support TPL
Changes for v2:
- Add more content in patch description to describe the board capabilities
- Add Michael Trimarchi as one of the contributors
- Add additional copyright
arch/arm/dts/px30-engicam-ctouch2.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
create mode 100644 arch/arm/dts/px30-engicam-ctouch2.dtsi
diff --git a/arch/arm/dts/px30-engicam-ctouch2.dtsi b/arch/arm/dts/px30-engicam-ctouch2.dtsi
new file mode 100644
index 0000000000..58425b1e55
--- /dev/null
+++ b/arch/arm/dts/px30-engicam-ctouch2.dtsi
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+#include "px30-engicam-common.dtsi"
--
2.25.1
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH v3 7/8] rockchip: Add Engicam PX30.Core C.TOUCH 2.0
2020-09-30 13:16 [PATCH v3 0/8] rockchip: Add Engicam PX30.Core support Jagan Teki
` (5 preceding siblings ...)
2020-09-30 13:16 ` [PATCH v3 6/8] arm64: dts: rockchip: px30: Add Engicam C.TOUCH 2.0 Jagan Teki
@ 2020-09-30 13:16 ` Jagan Teki
2020-09-30 13:16 ` [PATCH v3 8/8] doc: rockchip: Document Rockchip miniloader flashing Jagan Teki
7 siblings, 0 replies; 9+ messages in thread
From: Jagan Teki @ 2020-09-30 13:16 UTC (permalink / raw)
To: kever.yang, philipp.tomsich, sjg
Cc: u-boot, linux-rockchip, linux-amarula, Jagan Teki, sunil
PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.
C.TOUCH 2.0 is a general purpose carrier board with capacitive
touch interface support.
PX30.Core needs to mount on top of this Carrier board for creating
complete PX30.Core C.TOUCH 2.0 board.
Add support for it.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
---
Changes for v3:
- changes to support TPL
Changes for v2:
- Minor device tree adjustments as per Linux mainline changes
- rename device tree from ctouch2-of10.dts to ctouch2.dts
- rename defconfig from ctouch2-of10 to ctouch2
- collect Kever Yang r-b tag
- Add additional copyright
arch/arm/dts/Makefile | 1 +
arch/arm/dts/px30-px30-core-ctouch2.dts | 22 +++++
arch/arm/mach-rockchip/px30/Kconfig | 7 ++
board/engicam/px30_core/MAINTAINERS | 6 ++
configs/px30-core-ctouch2-px30_defconfig | 108 +++++++++++++++++++++++
5 files changed, 144 insertions(+)
create mode 100644 arch/arm/dts/px30-px30-core-ctouch2.dts
create mode 100644 configs/px30-core-ctouch2-px30_defconfig
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index f1b0286fa1..1ffa07cc6e 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -72,6 +72,7 @@ dtb-$(CONFIG_MACH_S700) += \
dtb-$(CONFIG_ROCKCHIP_PX30) += \
px30-evb.dtb \
px30-firefly.dtb \
+ px30-px30-core-ctouch2.dtb \
px30-px30-core-edimm2.2.dtb \
rk3326-odroid-go2.dtb
diff --git a/arch/arm/dts/px30-px30-core-ctouch2.dts b/arch/arm/dts/px30-px30-core-ctouch2.dts
new file mode 100644
index 0000000000..2da0128188
--- /dev/null
+++ b/arch/arm/dts/px30-px30-core-ctouch2.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+#include "px30.dtsi"
+#include "px30-engicam-ctouch2.dtsi"
+#include "px30-px30-core.dtsi"
+
+/ {
+ model = "Engicam PX30.Core C.TOUCH 2.0";
+ compatible = "engicam,px30-core-ctouch2", "engicam,px30-px30-core",
+ "rockchip,px30";
+
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+};
diff --git a/arch/arm/mach-rockchip/px30/Kconfig b/arch/arm/mach-rockchip/px30/Kconfig
index 5d014f6561..16090f5b08 100644
--- a/arch/arm/mach-rockchip/px30/Kconfig
+++ b/arch/arm/mach-rockchip/px30/Kconfig
@@ -20,6 +20,13 @@ config TARGET_PX30_CORE
* PX30.Core needs to mount on top of EDIMM2.2 for creating complete
PX30.Core EDIMM2.2 Starter Kit.
+ PX30.Core CTOUCH2:
+ * PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.
+ * CTOUCH2.0 is a general purpose Carrier board with capacitive
+ touch interface support.
+ * PX30.Core needs to mount on top of CTOUCH2.0 for creating complete
+ PX30.Core C.TOUCH Carrier board.
+
config ROCKCHIP_BOOT_MODE_REG
default 0xff010200
diff --git a/board/engicam/px30_core/MAINTAINERS b/board/engicam/px30_core/MAINTAINERS
index f98a84450a..b87ca22207 100644
--- a/board/engicam/px30_core/MAINTAINERS
+++ b/board/engicam/px30_core/MAINTAINERS
@@ -1,3 +1,9 @@
+PX30-Core-CTOUCH2.0
+M: Jagan Teki <jagan@amarulasolutions.com>
+M: Suniel Mahesh <sunil@amarulasolutions.com>
+S: Maintained
+F: configs/px30-core-ctouch2-px30_defconfig
+
PX30-Core-EDIMM2.2
M: Jagan Teki <jagan@amarulasolutions.com>
M: Suniel Mahesh <sunil@amarulasolutions.com>
diff --git a/configs/px30-core-ctouch2-px30_defconfig b/configs/px30-core-ctouch2-px30_defconfig
new file mode 100644
index 0000000000..d64f05d8c0
--- /dev/null
+++ b/configs/px30-core-ctouch2-px30_defconfig
@@ -0,0 +1,108 @@
+CONFIG_ARM=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SYS_TEXT_BASE=0x00200000
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_SPL_TEXT_BASE=0x00000000
+CONFIG_ROCKCHIP_PX30=y
+CONFIG_TARGET_PX30_CORE=y
+CONFIG_DEBUG_UART_CHANNEL=1
+CONFIG_TPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_SPL_STACK_R_ADDR=0x600000
+CONFIG_DEBUG_UART_BASE=0xFF160000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_DEFAULT_DEVICE_TREE="px30-px30-core-ctouch2"
+CONFIG_DEBUG_UART=y
+CONFIG_TPL_SYS_MALLOC_F_LEN=0x600
+# CONFIG_ANDROID_BOOT_IMAGE is not set
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SPL_LOAD_FIT=y
+# CONFIG_CONSOLE_MUX is not set
+CONFIG_DEFAULT_FDT_FILE="rockchip/px30-px30-core-ctouch2.dtb"
+CONFIG_MISC_INIT_R=y
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_BOOTROM_SUPPORT=y
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+CONFIG_SPL_STACK_R=y
+# CONFIG_TPL_BANNER_PRINT is not set
+CONFIG_SPL_CRC32_SUPPORT=y
+CONFIG_SPL_ATF=y
+# CONFIG_TPL_FRAMEWORK is not set
+# CONFIG_CMD_BOOTD is not set
+# CONFIG_CMD_ELF is not set
+# CONFIG_CMD_IMI is not set
+# CONFIG_CMD_XIMG is not set
+# CONFIG_CMD_LZMADEC is not set
+# CONFIG_CMD_UNZIP is not set
+CONFIG_CMD_GPT=y
+# CONFIG_CMD_LOADB is not set
+# CONFIG_CMD_LOADS is not set
+CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+# CONFIG_CMD_ITEST is not set
+# CONFIG_CMD_SETEXPR is not set
+# CONFIG_CMD_MISC is not set
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_ISO_PARTITION is not set
+CONFIG_EFI_PARTITION_ENTRIES_NUMBERS=64
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_LIVE=y
+CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_REGMAP=y
+CONFIG_SPL_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_SPL_SYSCON=y
+CONFIG_CLK=y
+CONFIG_SPL_CLK=y
+CONFIG_FASTBOOT_BUF_ADDR=0x800800
+CONFIG_FASTBOOT_BUF_SIZE=0x04000000
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_MISC=y
+CONFIG_ROCKCHIP_OTP=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_PHY_REALTEK=y
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_GMAC_ROCKCHIP=y
+CONFIG_PINCTRL=y
+CONFIG_DM_PMIC=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_REGULATOR_PWM=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_RAM=y
+CONFIG_SPL_RAM=y
+CONFIG_TPL_RAM=y
+CONFIG_ROCKCHIP_SDRAM_COMMON=y
+CONFIG_DM_RESET=y
+CONFIG_DM_RNG=y
+CONFIG_RNG_ROCKCHIP=y
+# CONFIG_SPECIFY_CONSOLE_INDEX is not set
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_DEBUG_UART_SKIP_INIT=y
+CONFIG_SOUND=y
+CONFIG_SYSRESET=y
+CONFIG_DM_THERMAL=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DWC2_OTG=y
+CONFIG_DM_VIDEO=y
+CONFIG_DISPLAY=y
+CONFIG_LCD=y
+CONFIG_SPL_TINY_MEMSET=y
+CONFIG_TPL_TINY_MEMSET=y
+CONFIG_LZO=y
+CONFIG_ERRNO_STR=y
--
2.25.1
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH v3 8/8] doc: rockchip: Document Rockchip miniloader flashing
2020-09-30 13:16 [PATCH v3 0/8] rockchip: Add Engicam PX30.Core support Jagan Teki
` (6 preceding siblings ...)
2020-09-30 13:16 ` [PATCH v3 7/8] rockchip: Add Engicam PX30.Core " Jagan Teki
@ 2020-09-30 13:16 ` Jagan Teki
7 siblings, 0 replies; 9+ messages in thread
From: Jagan Teki @ 2020-09-30 13:16 UTC (permalink / raw)
To: kever.yang, philipp.tomsich, sjg
Cc: u-boot, linux-rockchip, linux-amarula, Jagan Teki, sunil
This would be useful and recommended boot flow for new boards
which has doesn't have the DDR support yet in mainline.
Sometimes it is very useful for debugging mainline DDR support.
Documen it for px30 boot flow.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v3, v2:
- no changes
doc/board/rockchip/rockchip.rst | 40 ++++++++++++++++++++++++++++++++-
1 file changed, 39 insertions(+), 1 deletion(-)
diff --git a/doc/board/rockchip/rockchip.rst b/doc/board/rockchip/rockchip.rst
index 8c92de0c92..ea061ad171 100644
--- a/doc/board/rockchip/rockchip.rst
+++ b/doc/board/rockchip/rockchip.rst
@@ -123,6 +123,9 @@ To build rk3399 boards::
Flashing
--------
+1. Package the image with U-Boot TPL/SPL
+-----------------------------------------
+
SD Card
^^^^^^^
@@ -187,6 +190,39 @@ Copy SPI boot images into SD card and boot from SD::
sf erase 0x60000 +$filesize
sf write $kernel_addr_r 0x60000 ${filesize}
+2. Package the image with Rockchip miniloader
+---------------------------------------------
+
+Image package with Rockchip miniloader requires robin [1].
+
+Create idbloader.img
+
+.. code-block:: none
+
+ cd u-boot
+ ./tools/mkimage -n px30 -T rksd -d rkbin/bin/rk33/px30_ddr_333MHz_v1.15.bin idbloader.img
+ cat rkbin/bin/rk33/px30_miniloader_v1.22.bin >> idbloader.img
+ sudo dd if=idbloader.img of=/dev/sda seek=64
+
+Create trust.img
+
+.. code-block:: none
+
+ cd rkbin
+ ./tools/trust_merger RKTRUST/PX30TRUST.ini
+ sudo dd if=trust.img of=/dev/sda seek=24576
+
+Create uboot.img
+
+.. code-block:: none
+
+ rbink/tools/loaderimage --pack --uboot u-boot-dtb.bin uboot.img 0x200000
+ sudo dd if=uboot.img of=/dev/sda seek=16384
+
+Note:
+1. 0x200000 is load address and it's an optional in some platforms.
+2. rkbin binaries are kept on updating, so would recommend to use the latest versions.
+
TODO
----
@@ -195,5 +231,7 @@ TODO
- Document SPI flash boot
- Add missing SoC's with it boards list
+[1] https://github.com/rockchip-linux/rkbin
+
.. Jagan Teki <jagan@amarulasolutions.com>
-.. Tuesday 02 June 2020 12:18:57 AM IST
+.. Thursday 23 July 2020 04:50:22 PM IST
--
2.25.1
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
^ permalink raw reply related [flat|nested] 9+ messages in thread