[PATCH v9 0/8] ARM: Add Rockchip RV1126 support

[PATCH v9 0/8] ARM: Add Rockchip RV1126 support

[Jagan Teki]

This patch series combined the next level dts patches for 
Rockchip RV1126 support.

Changes for v9:
- fix serial2 alias
- collect Krzysztof ack
Changes for v8:
- fix rv1126 dtsi
- remove uart aliases
- add adc node name
- add uart dma-names
- add timer0 node name
Changes for v7:
- fix dtbs_check
- new dt-bindings patches
- collect Rob Ack

Any inputs?
Jagan.

Jagan Teki (8):
  dt-bindings: arm: rockchip: Add pmu compatible for rv1126
  dt-bindings: timer: rk-timer: Add rktimer for rv1126
  ARM: dts: rockchip: Add Rockchip RV1126 pinctrl
  ARM: dts: rockchip: Add Rockchip RV1126 SoC
  dt-bindings: vendor-prefixes: Add Edgeble AI Technologies Pvt. Ltd.
  dt-bindings: arm: rockchip: Add Edgeble Neural Compute Module 2
  ARM: dts: rockchip: rv1126: Add Edgeble Neural Compute Module 2(Neu2)
  ARM: dts: rockchip: rv1126: Add Edgeble Neural Compute Module 2(Neu2) IO

 .../devicetree/bindings/arm/rockchip.yaml     |   6 +
 .../devicetree/bindings/arm/rockchip/pmu.yaml |   2 +
 .../bindings/timer/rockchip,rk-timer.yaml     |   1 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 MAINTAINERS                                   |   2 +-
 arch/arm/boot/dts/Makefile                    |   1 +
 arch/arm/boot/dts/rv1126-edgeble-neu2-io.dts  |  42 ++
 arch/arm/boot/dts/rv1126-edgeble-neu2.dtsi    | 338 ++++++++++++++
 arch/arm/boot/dts/rv1126-pinctrl.dtsi         | 211 +++++++++
 arch/arm/boot/dts/rv1126.dtsi                 | 438 ++++++++++++++++++
 10 files changed, 1042 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/rv1126-edgeble-neu2-io.dts
 create mode 100644 arch/arm/boot/dts/rv1126-edgeble-neu2.dtsi
 create mode 100644 arch/arm/boot/dts/rv1126-pinctrl.dtsi
 create mode 100644 arch/arm/boot/dts/rv1126.dtsi

-- 
2.25.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH v9 1/8] dt-bindings: arm: rockchip: Add pmu compatible for rv1126

[Jagan Teki]

Add PMU compatible string for rockchip rv1126.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
---
Changes for v9:
- none
Changes for v8:
- add Krzysztof ack
Changes for v7:
- new patch

 Documentation/devicetree/bindings/arm/rockchip/pmu.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/rockchip/pmu.yaml b/Documentation/devicetree/bindings/arm/rockchip/pmu.yaml
index 8c73bc7f4009..b79c81cd9f0e 100644
--- a/Documentation/devicetree/bindings/arm/rockchip/pmu.yaml
+++ b/Documentation/devicetree/bindings/arm/rockchip/pmu.yaml
@@ -27,6 +27,7 @@ select:
           - rockchip,rk3399-pmu
           - rockchip,rk3568-pmu
           - rockchip,rk3588-pmu
+          - rockchip,rv1126-pmu
 
   required:
     - compatible
@@ -43,6 +44,7 @@ properties:
           - rockchip,rk3399-pmu
           - rockchip,rk3568-pmu
           - rockchip,rk3588-pmu
+          - rockchip,rv1126-pmu
       - const: syscon
       - const: simple-mfd
 
-- 
2.25.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH v9 2/8] dt-bindings: timer: rk-timer: Add rktimer for rv1126

[Jagan Teki]

Add rockchip timer compatible string for rockchip rv1126.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
---
Changes for v9:
- add Krzysztof ack
Changes for v8:
- drop cc list

 Documentation/devicetree/bindings/timer/rockchip,rk-timer.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/timer/rockchip,rk-timer.yaml b/Documentation/devicetree/bindings/timer/rockchip,rk-timer.yaml
index dc3bc1e62fe9..a6221222e948 100644
--- a/Documentation/devicetree/bindings/timer/rockchip,rk-timer.yaml
+++ b/Documentation/devicetree/bindings/timer/rockchip,rk-timer.yaml
@@ -17,6 +17,7 @@ properties:
       - items:
           - enum:
               - rockchip,rv1108-timer
+              - rockchip,rv1126-timer
               - rockchip,rk3036-timer
               - rockchip,rk3188-timer
               - rockchip,rk3228-timer
-- 
2.25.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH v9 3/8] ARM: dts: rockchip: Add Rockchip RV1126 pinctrl

[Jagan Teki]

Add pinctrl definitions for Rockchip RV1126.

From RK3568 on-wards pinctrl configurations are maintained
in common conf file rockchip-pinconf.dtsi and it is available
in arm64 path (arch/arm64/boot/dts/rockchip/rockchip-pinconf.dtsi).

So, include the same conf file to RV1126 pinctrl from arm64 path.

Signed-off-by: Jagan Teki <jagan@edgeble.ai>
---
Changes for v9, v8:
- none
Changes for v7:
- remove Edegble in license text
Changes for v6:
- updated commit message
Changes for v5:
- none
Changes for v4:
- update i2c pins
- rebase on -next
Changes for v3:
- none
Changes for v2:
- spilt pinctrl as separate patch 

 MAINTAINERS                           |   2 +-
 arch/arm/boot/dts/rv1126-pinctrl.dtsi | 211 ++++++++++++++++++++++++++
 2 files changed, 212 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/rv1126-pinctrl.dtsi

diff --git a/MAINTAINERS b/MAINTAINERS
index 5f66378dcfb0..4fd0fa773209 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2750,7 +2750,7 @@ F:	Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml
 F:	Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml
 F:	Documentation/devicetree/bindings/spi/spi-rockchip.yaml
 F:	arch/arm/boot/dts/rk3*
-F:	arch/arm/boot/dts/rv1108*
+F:	arch/arm/boot/dts/rv11*
 F:	arch/arm/mach-rockchip/
 F:	drivers/*/*/*rockchip*
 F:	drivers/*/*rockchip*
diff --git a/arch/arm/boot/dts/rv1126-pinctrl.dtsi b/arch/arm/boot/dts/rv1126-pinctrl.dtsi
new file mode 100644
index 000000000000..4bc419cc1210
--- /dev/null
+++ b/arch/arm/boot/dts/rv1126-pinctrl.dtsi
@@ -0,0 +1,211 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <arm64/rockchip/rockchip-pinconf.dtsi>
+
+/*
+ * This file is auto generated by pin2dts tool, please keep these code
+ * by adding changes at end of this file.
+ */
+&pinctrl {
+	emmc {
+		/omit-if-no-ref/
+		emmc_rstnout: emmc-rstnout {
+			rockchip,pins =
+				/* emmc_rstn */
+				<1 RK_PA3 2 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		emmc_bus8: emmc-bus8 {
+			rockchip,pins =
+				/* emmc_d0 */
+				<0 RK_PC4 2 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d1 */
+				<0 RK_PC5 2 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d2 */
+				<0 RK_PC6 2 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d3 */
+				<0 RK_PC7 2 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d4 */
+				<0 RK_PD0 2 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d5 */
+				<0 RK_PD1 2 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d6 */
+				<0 RK_PD2 2 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d7 */
+				<0 RK_PD3 2 &pcfg_pull_up_drv_level_2>;
+		};
+		/omit-if-no-ref/
+		emmc_clk: emmc-clk {
+			rockchip,pins =
+				/* emmc_clko */
+				<0 RK_PD7 2 &pcfg_pull_up_drv_level_2>;
+		};
+		/omit-if-no-ref/
+		emmc_cmd: emmc-cmd {
+			rockchip,pins =
+				/* emmc_cmd */
+				<0 RK_PD5 2 &pcfg_pull_up_drv_level_2>;
+		};
+	};
+	i2c0 {
+		/omit-if-no-ref/
+		i2c0_xfer: i2c0-xfer {
+			rockchip,pins =
+				/* i2c0_scl */
+				<0 RK_PB4 1 &pcfg_pull_none_drv_level_0_smt>,
+				/* i2c0_sda */
+				<0 RK_PB5 1 &pcfg_pull_none_drv_level_0_smt>;
+		};
+	};
+	sdmmc0 {
+		/omit-if-no-ref/
+		sdmmc0_bus4: sdmmc0-bus4 {
+			rockchip,pins =
+				/* sdmmc0_d0 */
+				<1 RK_PA4 1 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc0_d1 */
+				<1 RK_PA5 1 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc0_d2 */
+				<1 RK_PA6 1 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc0_d3 */
+				<1 RK_PA7 1 &pcfg_pull_up_drv_level_2>;
+		};
+		/omit-if-no-ref/
+		sdmmc0_clk: sdmmc0-clk {
+			rockchip,pins =
+				/* sdmmc0_clk */
+				<1 RK_PB0 1 &pcfg_pull_up_drv_level_2>;
+		};
+		/omit-if-no-ref/
+		sdmmc0_cmd: sdmmc0-cmd {
+			rockchip,pins =
+				/* sdmmc0_cmd */
+				<1 RK_PB1 1 &pcfg_pull_up_drv_level_2>;
+		};
+		/omit-if-no-ref/
+		sdmmc0_det: sdmmc0-det {
+			rockchip,pins =
+				<0 RK_PA3 1 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		sdmmc0_pwr: sdmmc0-pwr {
+			rockchip,pins =
+				<0 RK_PC0 1 &pcfg_pull_none>;
+		};
+	};
+	sdmmc1 {
+		/omit-if-no-ref/
+		sdmmc1_bus4: sdmmc1-bus4 {
+			rockchip,pins =
+				/* sdmmc1_d0 */
+				<1 RK_PB4 1 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc1_d1 */
+				<1 RK_PB5 1 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc1_d2 */
+				<1 RK_PB6 1 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc1_d3 */
+				<1 RK_PB7 1 &pcfg_pull_up_drv_level_2>;
+		};
+		/omit-if-no-ref/
+		sdmmc1_clk: sdmmc1-clk {
+			rockchip,pins =
+				/* sdmmc1_clk */
+				<1 RK_PB2 1 &pcfg_pull_up_drv_level_2>;
+		};
+		/omit-if-no-ref/
+		sdmmc1_cmd: sdmmc1-cmd {
+			rockchip,pins =
+				/* sdmmc1_cmd */
+				<1 RK_PB3 1 &pcfg_pull_up_drv_level_2>;
+		};
+		/omit-if-no-ref/
+		sdmmc1_det: sdmmc1-det {
+			rockchip,pins =
+				<1 RK_PD0 2 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		sdmmc1_pwr: sdmmc1-pwr {
+			rockchip,pins =
+				<1 RK_PD1 2 &pcfg_pull_none>;
+		};
+	};
+	uart0 {
+		/omit-if-no-ref/
+		uart0_xfer: uart0-xfer {
+			rockchip,pins =
+				/* uart0_rx */
+				<1 RK_PC2 1 &pcfg_pull_up>,
+				/* uart0_tx */
+				<1 RK_PC3 1 &pcfg_pull_up>;
+		};
+		/omit-if-no-ref/
+		uart0_ctsn: uart0-ctsn {
+			rockchip,pins =
+				<1 RK_PC1 1 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		uart0_rtsn: uart0-rtsn {
+			rockchip,pins =
+				<1 RK_PC0 1 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		uart0_rtsn_gpio: uart0-rts-pin {
+			rockchip,pins =
+				<1 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+	uart1 {
+		/omit-if-no-ref/
+		uart1m0_xfer: uart1m0-xfer {
+			rockchip,pins =
+				/* uart1_rx_m0 */
+				<0 RK_PB7 2 &pcfg_pull_up>,
+				/* uart1_tx_m0 */
+				<0 RK_PB6 2 &pcfg_pull_up>;
+		};
+	};
+	uart2 {
+		/omit-if-no-ref/
+		uart2m1_xfer: uart2m1-xfer {
+			rockchip,pins =
+				/* uart2_rx_m1 */
+				<3 RK_PA3 1 &pcfg_pull_up>,
+				/* uart2_tx_m1 */
+				<3 RK_PA2 1 &pcfg_pull_up>;
+		};
+	};
+	uart3 {
+		/omit-if-no-ref/
+		uart3m0_xfer: uart3m0-xfer {
+			rockchip,pins =
+				/* uart3_rx_m0 */
+				<3 RK_PC7 4 &pcfg_pull_up>,
+				/* uart3_tx_m0 */
+				<3 RK_PC6 4 &pcfg_pull_up>;
+		};
+	};
+	uart4 {
+		/omit-if-no-ref/
+		uart4m0_xfer: uart4m0-xfer {
+			rockchip,pins =
+				/* uart4_rx_m0 */
+				<3 RK_PA5 4 &pcfg_pull_up>,
+				/* uart4_tx_m0 */
+				<3 RK_PA4 4 &pcfg_pull_up>;
+		};
+	};
+	uart5 {
+		/omit-if-no-ref/
+		uart5m0_xfer: uart5m0-xfer {
+			rockchip,pins =
+				/* uart5_rx_m0 */
+				<3 RK_PA7 4 &pcfg_pull_up>,
+				/* uart5_tx_m0 */
+				<3 RK_PA6 4 &pcfg_pull_up>;
+		};
+	};
+};
-- 
2.25.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH v9 4/8] ARM: dts: rockchip: Add Rockchip RV1126 SoC

[Jagan Teki]

RV1126 is a high-performance vision processor SoC for IPC/CVR,
especially for AI related application.

It is based on quad-core ARM Cortex-A7 32-bit core which integrates
NEON and FPU. There is a 32KB I-cache and 32KB D-cache for each core
and 512KB unified L2 cache. It has build-in NPU supports INT8/INT16
hybrid operation and computing power is up to 2.0TOPs.

This patch add basic core dtsi support.

Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
---
Changes for v9:
- none
Changes for v8:
- fix rv1126 dtsi
- remove uart aliases
- add adc node name
- add uart dma-names
- add timer0 node name
Changes for v7:
- fix dtbs_check
- rearrange nodes
- remove Edegble in license text
Changes for v6:
- add psci node
Changes for v5:
- none
Changes for v4:
- update i2c0
- rebase on -next
Changes for v3:
- update cru and power file names
Changes for v2:
- split pinctrl in separate patch

 arch/arm/boot/dts/rv1126.dtsi | 438 ++++++++++++++++++++++++++++++++++
 1 file changed, 438 insertions(+)
 create mode 100644 arch/arm/boot/dts/rv1126.dtsi

diff --git a/arch/arm/boot/dts/rv1126.dtsi b/arch/arm/boot/dts/rv1126.dtsi
new file mode 100644
index 000000000000..1cb43147e90b
--- /dev/null
+++ b/arch/arm/boot/dts/rv1126.dtsi
@@ -0,0 +1,438 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd.
+ */
+
+#include <dt-bindings/clock/rockchip,rv1126-cru.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/power/rockchip,rv1126-power.h>
+#include <dt-bindings/soc/rockchip,boot-mode.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	compatible = "rockchip,rv1126";
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		i2c0 = &i2c0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@f00 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf00>;
+			enable-method = "psci";
+			clocks = <&cru ARMCLK>;
+		};
+
+		cpu1: cpu@f01 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf01>;
+			enable-method = "psci";
+			clocks = <&cru ARMCLK>;
+		};
+
+		cpu2: cpu@f02 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf02>;
+			enable-method = "psci";
+			clocks = <&cru ARMCLK>;
+		};
+
+		cpu3: cpu@f03 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf03>;
+			enable-method = "psci";
+			clocks = <&cru ARMCLK>;
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		clock-frequency = <24000000>;
+	};
+
+	xin24m: oscillator {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xin24m";
+		#clock-cells = <0>;
+	};
+
+	grf: syscon@fe000000 {
+		compatible = "rockchip,rv1126-grf", "syscon", "simple-mfd";
+		reg = <0xfe000000 0x20000>;
+	};
+
+	pmugrf: syscon@fe020000 {
+		compatible = "rockchip,rv1126-pmugrf", "syscon", "simple-mfd";
+		reg = <0xfe020000 0x1000>;
+
+		pmu_io_domains: io-domains {
+			compatible = "rockchip,rv1126-pmu-io-voltage-domain";
+			status = "disabled";
+		};
+	};
+
+	qos_emmc: qos@fe860000 {
+		compatible = "rockchip,rv1126-qos", "syscon";
+		reg = <0xfe860000 0x20>;
+	};
+
+	qos_nandc: qos@fe860080 {
+		compatible = "rockchip,rv1126-qos", "syscon";
+		reg = <0xfe860080 0x20>;
+	};
+
+	qos_sfc: qos@fe860200 {
+		compatible = "rockchip,rv1126-qos", "syscon";
+		reg = <0xfe860200 0x20>;
+	};
+
+	qos_sdio: qos@fe86c000 {
+		compatible = "rockchip,rv1126-qos", "syscon";
+		reg = <0xfe86c000 0x20>;
+	};
+
+	gic: interrupt-controller@feff0000 {
+		compatible = "arm,gic-400";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+
+		reg = <0xfeff1000 0x1000>,
+		      <0xfeff2000 0x2000>,
+		      <0xfeff4000 0x2000>,
+		      <0xfeff6000 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	pmu: power-management@ff3e0000 {
+		compatible = "rockchip,rv1126-pmu", "syscon", "simple-mfd";
+		reg = <0xff3e0000 0x1000>;
+
+		power: power-controller {
+			compatible = "rockchip,rv1126-power-controller";
+			#power-domain-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			power-domain@RV1126_PD_NVM {
+				reg = <RV1126_PD_NVM>;
+				clocks = <&cru HCLK_EMMC>,
+					 <&cru CLK_EMMC>,
+					 <&cru HCLK_NANDC>,
+					 <&cru CLK_NANDC>,
+					 <&cru HCLK_SFC>,
+					 <&cru HCLK_SFCXIP>,
+					 <&cru SCLK_SFC>;
+				pm_qos = <&qos_emmc>,
+					 <&qos_nandc>,
+					 <&qos_sfc>;
+				#power-domain-cells = <0>;
+			};
+
+			power-domain@RV1126_PD_SDIO {
+				reg = <RV1126_PD_SDIO>;
+				clocks = <&cru HCLK_SDIO>,
+					 <&cru CLK_SDIO>;
+				pm_qos = <&qos_sdio>;
+				#power-domain-cells = <0>;
+			};
+		};
+	};
+
+	i2c0: i2c@ff3f0000 {
+		compatible = "rockchip,rv1126-i2c", "rockchip,rk3399-i2c";
+		reg = <0xff3f0000 0x1000>;
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+		rockchip,grf = <&pmugrf>;
+		clocks = <&pmucru CLK_I2C0>, <&pmucru PCLK_I2C0>;
+		clock-names = "i2c", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c0_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	uart1: serial@ff410000 {
+		compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart";
+		reg = <0xff410000 0x100>;
+		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <24000000>;
+		clocks = <&pmucru SCLK_UART1>, <&pmucru PCLK_UART1>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac 7>, <&dmac 6>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart1m0_xfer>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	pmucru: clock-controller@ff480000 {
+		compatible = "rockchip,rv1126-pmucru";
+		reg = <0xff480000 0x1000>;
+		rockchip,grf = <&grf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	cru: clock-controller@ff490000 {
+		compatible = "rockchip,rv1126-cru";
+		reg = <0xff490000 0x1000>;
+		clocks = <&xin24m>;
+		clock-names = "xin24m";
+		rockchip,grf = <&grf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	dmac: dma-controller@ff4e0000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0xff4e0000 0x4000>;
+		interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+		#dma-cells = <1>;
+		arm,pl330-periph-burst;
+		clocks = <&cru ACLK_DMAC>;
+		clock-names = "apb_pclk";
+	};
+
+	uart0: serial@ff560000 {
+		compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart";
+		reg = <0xff560000 0x100>;
+		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac 5>, <&dmac 4>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart0_xfer>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	uart2: serial@ff570000 {
+		compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart";
+		reg = <0xff570000 0x100>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac 9>, <&dmac 8>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart2m1_xfer>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	uart3: serial@ff580000 {
+		compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart";
+		reg = <0xff580000 0x100>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac 11>, <&dmac 10>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart3m0_xfer>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	uart4: serial@ff590000 {
+		compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart";
+		reg = <0xff590000 0x100>;
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac 13>, <&dmac 12>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart4m0_xfer>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	uart5: serial@ff5a0000 {
+		compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart";
+		reg = <0xff5a0000 0x100>;
+		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART5>, <&cru PCLK_UART5>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac 15>, <&dmac 14>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart5m0_xfer>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	saradc: adc@ff5e0000 {
+		compatible = "rockchip,rv1126-saradc", "rockchip,rk3399-saradc";
+		reg = <0xff5e0000 0x100>;
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+		#io-channel-cells = <1>;
+		clocks = <&cru CLK_SARADC>, <&cru PCLK_SARADC>;
+		clock-names = "saradc", "apb_pclk";
+		resets = <&cru SRST_SARADC_P>;
+		reset-names = "saradc-apb";
+		status = "disabled";
+	};
+
+	timer0: timer@ff660000 {
+		compatible = "rockchip,rv1126-timer", "rockchip,rk3288-timer";
+		reg = <0xff660000 0x20>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_TIMER>, <&cru CLK_TIMER0>;
+		clock-names = "pclk", "timer";
+	};
+
+	emmc: mmc@ffc50000 {
+		compatible = "rockchip,rv1126-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0xffc50000 0x4000>;
+		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_EMMC>, <&cru CLK_EMMC>,
+			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		max-frequency = <200000000>;
+		power-domains = <&power RV1126_PD_NVM>;
+		status = "disabled";
+	};
+
+	sdmmc: mmc@ffc60000 {
+		compatible = "rockchip,rv1126-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0xffc60000 0x4000>;
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_SDMMC>, <&cru CLK_SDMMC>,
+			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		max-frequency = <200000000>;
+		status = "disabled";
+	};
+
+	sdio: mmc@ffc70000 {
+		compatible = "rockchip,rv1126-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0xffc70000 0x4000>;
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_SDIO>, <&cru CLK_SDIO>,
+			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		max-frequency = <200000000>;
+		power-domains = <&power RV1126_PD_SDIO>;
+		status = "disabled";
+	};
+
+	pinctrl: pinctrl {
+		compatible = "rockchip,rv1126-pinctrl";
+		rockchip,grf = <&grf>;
+		rockchip,pmu = <&pmugrf>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gpio0: gpio@ff460000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0xff460000 0x100>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmucru PCLK_GPIO0>, <&pmucru DBCLK_GPIO0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@ff620000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0xff620000 0x100>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO1>, <&cru DBCLK_GPIO1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@ff630000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0xff630000 0x100>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO2>, <&cru DBCLK_GPIO2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@ff640000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0xff640000 0x100>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO3>, <&cru DBCLK_GPIO3>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio4: gpio@ff650000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0xff650000 0x100>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO4>, <&cru DBCLK_GPIO4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
+
+#include "rv1126-pinctrl.dtsi"
-- 
2.25.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH v9 5/8] dt-bindings: vendor-prefixes: Add Edgeble AI Technologies Pvt. Ltd.

[Jagan Teki]

Edgeble AI is an Artificial Intelligence company with a focus on
deploying Neural Acceleration principles at the Edge.

Add vendor prefix for it.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
---
Changes for v9, v8, v7, v6:
- none

 Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index c601f5438b02..dfc071548e91 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -370,6 +370,8 @@ patternProperties:
     description: EBV Elektronik
   "^eckelmann,.*":
     description: Eckelmann AG
+  "^edgeble,.*":
+    description: Edgeble AI Technologies Pvt. Ltd.
   "^edimax,.*":
     description: EDIMAX Technology Co., Ltd
   "^edt,.*":
-- 
2.25.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH v9 6/8] dt-bindings: arm: rockchip: Add Edgeble Neural Compute Module 2

[Jagan Teki]

Neural Compute Module 2(Neu2) is a 96boards SoM-CB compute module
based on Rockchip RV1126 from Edgeble AI.

Edgeble Neural Compute Module 2(Neu2) IO board is an industrial
form factor evaluation board from Edgeble AI.

Neu2 needs to mount on top of this IO board in order to create complete
Edgeble Neural Compute Module 2(Neu2) IO platform.

Add dt-bindings for it.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
---
Changes for v9, v8:
- none
Changes for v7:
- collect Rob Ack
Changes for v6:

 Documentation/devicetree/bindings/arm/rockchip.yaml | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
index 244c42eaae8c..26fdd205a899 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.yaml
+++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
@@ -85,6 +85,12 @@ properties:
           - const: chipspark,rayeager-px2
           - const: rockchip,rk3066a
 
+      - description: Edgeble Neural Compute Module 2(Neu2) SoM based boards
+        items:
+          - const: edgeble,neural-compute-module-2-io   # Edgeble Neural Compute Module 2 IO Board
+          - const: edgeble,neural-compute-module-2      # Edgeble Neural Compute Module 2 SoM
+          - const: rockchip,rv1126
+
       - description: Elgin RV1108 R1
         items:
           - const: elgin,rv1108-r1
-- 
2.25.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH v9 7/8] ARM: dts: rockchip: rv1126: Add Edgeble Neural Compute Module 2(Neu2)

[Jagan Teki]

Neural Compute Module 2(Neu2) is a 96boards SoM-CB compute module
based on Rockchip RV1126 from Edgeble AI.

General features:
- Rockchip RV1126
- 2/4GB LPDDR4
- 8/16/32GB eMMC
- 2x MIPI CSI2 FPC connector
- Fn-link 8223A-SR WiFi/BT

Industrial grade (-40 °C to +85 °C) version of the same class of module
called Neu2k powered with Rockchip RV1126K.

Neu2 needs to mount on top of Edgeble IO boards for creating complete
platform solutions.

Add support for it.

Signed-off-by: Jagan Teki <jagan@edgeble.ai>
---
Changes for v9, v8:
- none
Changes for v7:
- fix dtbs_check
Changes for v6:
- updated the SOM name

 arch/arm/boot/dts/rv1126-edgeble-neu2.dtsi | 338 +++++++++++++++++++++
 1 file changed, 338 insertions(+)
 create mode 100644 arch/arm/boot/dts/rv1126-edgeble-neu2.dtsi

diff --git a/arch/arm/boot/dts/rv1126-edgeble-neu2.dtsi b/arch/arm/boot/dts/rv1126-edgeble-neu2.dtsi
new file mode 100644
index 000000000000..7db3f8bb581d
--- /dev/null
+++ b/arch/arm/boot/dts/rv1126-edgeble-neu2.dtsi
@@ -0,0 +1,338 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2022 Edgeble AI Technologies Pvt. Ltd.
+ */
+
+/ {
+	compatible = "edgeble,neural-compute-module-2", "rockchip,rv1126";
+
+	aliases {
+		mmc0 = &emmc;
+	};
+
+	vcc5v0_sys: regulator-vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vccio_flash: regulator-vccio-flash {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&flash_vol_sel>;
+		regulator-name = "vccio_flash";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+	};
+
+	sdio_pwrseq: pwrseq-sdio {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk809 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+		reset-gpios = <&gpio1 RK_PD0 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&emmc {
+	bus-width = <8>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_cmd &emmc_clk &emmc_rstnout>;
+	rockchip,default-sample-phase = <90>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vccio_flash>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB1 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc_buck5>;
+		vcc6-supply = <&vcc_buck5>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+
+		regulators {
+			vdd_npu_vepu: DCDC_REG1 {
+				regulator-name = "vdd_npu_vepu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <725000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc3v3_sys: DCDC_REG4 {
+				regulator-name = "vcc3v3_sys";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_buck5: DCDC_REG5 {
+				regulator-name = "vcc_buck5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2200000>;
+				regulator-max-microvolt = <2200000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2200000>;
+				};
+			};
+
+			vcc_0v8: LDO_REG1 {
+				regulator-name = "vcc_0v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_pmu: LDO_REG2 {
+				regulator-name = "vcc1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd0v8_pmu: LDO_REG3 {
+				regulator-name = "vcc0v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <800000>;
+				};
+			};
+
+			vcc_1v8: LDO_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_dovdd: LDO_REG5 {
+				regulator-name = "vcc_dovdd";
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_dvdd: LDO_REG6 {
+				regulator-name = "vcc_dvdd";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_avdd: LDO_REG7 {
+				regulator-name = "vcc_avdd";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG8 {
+				regulator-name = "vccio_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_sd: LDO_REG9 {
+				regulator-name = "vcc3v3_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_5v0: SWITCH_REG1 {
+				regulator-name = "vcc_5v0";
+			};
+
+			vcc_3v3: SWITCH_REG2 {
+				regulator-name = "vcc_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&pinctrl {
+	bt {
+		bt_enable: bt-enable {
+			rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	flash {
+		flash_vol_sel: flash-vol-sel {
+			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	wifi {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio0-supply = <&vcc1v8_pmu>;
+	pmuio1-supply = <&vcc3v3_sys>;
+	vccio1-supply = <&vccio_flash>;
+	vccio2-supply = <&vccio_sd>;
+	vccio3-supply = <&vcc_1v8>;
+	vccio4-supply = <&vcc_dovdd>;
+	vccio5-supply = <&vcc_1v8>;
+	vccio6-supply = <&vcc_1v8>;
+	vccio7-supply = <&vcc_dovdd>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdio {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	max-frequency = <100000000>;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc1_clk &sdmmc1_cmd &sdmmc1_bus4>;
+	rockchip,default-sample-phase = <90>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v3_sys>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_ctsn &uart0_rtsn>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,qca9377-bt";
+		clocks = <&rk809 1>;
+		enable-gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>; /* BT_RST */
+		max-speed = <2000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_enable>;
+		vddxo-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_1v8>;
+	};
+};
-- 
2.25.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH v9 8/8] ARM: dts: rockchip: rv1126: Add Edgeble Neural Compute Module 2(Neu2) IO

[Jagan Teki]

Neural Compute Module 2(Neu2) IO board is an industrial form factor
evaluation board from Edgeble AI.

General features:
- microSD slot
- MIPI DSI connector
- 2x USB Host
- 1x USB OTG
- Ethernet
- mini PCIe
- Onboard PoE
- RS485, RS232, CAN
- Micro Phone array
- Speaker
- RTC battery slot
- 40-pin expansion

Neu2 needs to mount on top of this IO board in order to create complete
Edgeble Neural Compute Module 2(Neu2) IO platform.

Add support for it.

Signed-off-by: Jagan Teki <jagan@edgeble.ai>
---
Changes for v9:
- add serial2 aliases
Changes for v8, v7:
- none
Changes for v6:
- update the carrier name.

 arch/arm/boot/dts/Makefile                   |  1 +
 arch/arm/boot/dts/rv1126-edgeble-neu2-io.dts | 42 ++++++++++++++++++++
 2 files changed, 43 insertions(+)
 create mode 100644 arch/arm/boot/dts/rv1126-edgeble-neu2-io.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index e48cfbc4e8e4..40cc34bd4945 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1122,6 +1122,7 @@ dtb-$(CONFIG_ARCH_RENESAS) += \
 dtb-$(CONFIG_ARCH_ROCKCHIP) += \
 	rv1108-elgin-r1.dtb \
 	rv1108-evb.dtb \
+	rv1126-edgeble-neu2-io.dtb \
 	rk3036-evb.dtb \
 	rk3036-kylin.dtb \
 	rk3066a-bqcurie2.dtb \
diff --git a/arch/arm/boot/dts/rv1126-edgeble-neu2-io.dts b/arch/arm/boot/dts/rv1126-edgeble-neu2-io.dts
new file mode 100644
index 000000000000..dded0a12f0cd
--- /dev/null
+++ b/arch/arm/boot/dts/rv1126-edgeble-neu2-io.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2022 Edgeble AI Technologies Pvt. Ltd.
+ */
+
+/dts-v1/;
+#include "rv1126.dtsi"
+#include "rv1126-edgeble-neu2.dtsi"
+
+/ {
+	model = "Edgeble Neu2 IO Board";
+	compatible = "edgeble,neural-compute-module-2-io",
+		     "edgeble,neural-compute-module-2", "rockchip,rv1126";
+
+	aliases {
+		serial2 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_bus4 &sdmmc0_det>;
+	rockchip,default-sample-phase = <90>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr104;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
-- 
2.25.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH v9 6/8] dt-bindings: arm: rockchip: Add Edgeble Neural Compute Module 2

[Heiko Stübner]

Am Dienstag, 29. November 2022, 08:54:22 CET schrieb Jagan Teki:
> Neural Compute Module 2(Neu2) is a 96boards SoM-CB compute module
> based on Rockchip RV1126 from Edgeble AI.
> 
> Edgeble Neural Compute Module 2(Neu2) IO board is an industrial
> form factor evaluation board from Edgeble AI.
> 
> Neu2 needs to mount on top of this IO board in order to create complete
> Edgeble Neural Compute Module 2(Neu2) IO platform.
> 
> Add dt-bindings for it.
> 
> Acked-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Jagan Teki <jagan@edgeble.ai>

Acked-by: Heiko Stuebner <heiko@sntech.de>

@Daniel: do you want to pick this patch into the clocksource tree?

[together with the similar rk3128 one?]

> ---
> Changes for v9, v8:
> - none
> Changes for v7:
> - collect Rob Ack
> Changes for v6:
> 
>  Documentation/devicetree/bindings/arm/rockchip.yaml | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
> index 244c42eaae8c..26fdd205a899 100644
> --- a/Documentation/devicetree/bindings/arm/rockchip.yaml
> +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
> @@ -85,6 +85,12 @@ properties:
>            - const: chipspark,rayeager-px2
>            - const: rockchip,rk3066a
>  
> +      - description: Edgeble Neural Compute Module 2(Neu2) SoM based boards
> +        items:
> +          - const: edgeble,neural-compute-module-2-io   # Edgeble Neural Compute Module 2 IO Board
> +          - const: edgeble,neural-compute-module-2      # Edgeble Neural Compute Module 2 SoM
> +          - const: rockchip,rv1126
> +
>        - description: Elgin RV1108 R1
>          items:
>            - const: elgin,rv1108-r1
> 





_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: (subset) [PATCH v9 0/8] ARM: Add Rockchip RV1126 support

[Heiko Stuebner]

On Tue, 29 Nov 2022 13:24:16 +0530, Jagan Teki wrote:
> This patch series combined the next level dts patches for
> Rockchip RV1126 support.
> 
> Changes for v9:
> - fix serial2 alias
> - collect Krzysztof ack
> Changes for v8:
> - fix rv1126 dtsi
> - remove uart aliases
> - add adc node name
> - add uart dma-names
> - add timer0 node name
> Changes for v7:
> - fix dtbs_check
> - new dt-bindings patches
> - collect Rob Ack
> 
> [...]

Applied for 6.3, thanks!

[1/8] dt-bindings: arm: rockchip: Add pmu compatible for rv1126
      commit: 79ff3e4040fbe20a010c3e28f8916c6a44dabdbb
[3/8] ARM: dts: rockchip: Add Rockchip RV1126 pinctrl
      commit: afa5af90d2ee35c9bb283b1b0d26bd43e78df122
[4/8] ARM: dts: rockchip: Add Rockchip RV1126 SoC
      commit: 0cea6325da9dfaec807c65b0bdcfab7d9a235069
[5/8] dt-bindings: vendor-prefixes: Add Edgeble AI Technologies Pvt. Ltd.
      commit: f1459809a2194d5808067bdce86ad007f6054dc4
[6/8] dt-bindings: arm: rockchip: Add Edgeble Neural Compute Module 2
      commit: c4b37f32c7d3c79646fa090fba7054ae7141c510
[7/8] ARM: dts: rockchip: rv1126: Add Edgeble Neural Compute Module 2(Neu2)
      commit: 58022d5a620d8a6e72a8691b9df65da7951f19b9
[8/8] ARM: dts: rockchip: rv1126: Add Edgeble Neural Compute Module 2(Neu2) IO
      commit: b4dc2677b1902bb4ca7e5fef1bd49ba6138b759d

Best regards,
-- 
Heiko Stuebner <heiko@sntech.de>

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip