linux-rockchip.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v8 00/14] mfd/pinctrl/regulator: Add RK806 Support
@ 2023-05-04 17:36 Sebastian Reichel
  2023-05-04 17:36 ` [PATCH v8 01/14] clk: RK808: reduce 'struct rk808' usage Sebastian Reichel
                   ` (15 more replies)
  0 siblings, 16 replies; 35+ messages in thread
From: Sebastian Reichel @ 2023-05-04 17:36 UTC (permalink / raw)
  To: Heiko Stuebner, Rob Herring, Krzysztof Kozlowski, Lee Jones
  Cc: Michael Turquette, Stephen Boyd, Linus Walleij, Mark Brown,
	Liam Girdwood, Alexandre Belloni, Alessandro Zummo,
	linux-rockchip, devicetree, linux-kernel, Sebastian Reichel,
	kernel

Hi,

All existing boards using RK3588/RK3588s use RK806 PMICs. This series is now
the main blocker for full upstream support of those boards and it would be good
to have it merged for 6.5 :) The patches have been tested on multiple different
platforms and are mainly missing an Ack from Mark or Liam for the rk808-regulator
changes.

Merging must happen through a single tree, since the pinctrl and regulator
drivers rely on the register definitions from the include file added by the MFD
patch. My suggested merge strategy is that Lee creates an immutable branch for
the regulator/pinctrl tree once all Acks have been collected.

Changelog since PATCHv7:
 * https://lore.kernel.org/all/20230307153617.643260-1-sebastian.reichel@collabora.com/
 * rebased to 1a5304fecee5 (current master from 2023-05-04) - a bit
   before v6.4-rc1 (which has not yet been tagged), but all involved
   trees have been merged
 * added new patch to fix rk808 driver not probing correctly when a
   probe defer happens _after_ setting up the of_node.
 * added patch to cleanup usage of parent device in rk808 regulator
   driver
 * added a patch reverting async probing in rk808 driver
 * collected Stephen Boyd's Ack for the rk808 clk patch
 * collected Alexandre Belloni's Ack for the mfd split patch
 * collected Lee Jones' Ack for the rk806 MFD patch
 * collected Tested-by from Vincent Legoll for the v6 series patches
 * collected Tested-by from Diederik de Haas for the v6 series patches

Changelog since PATCHv6:
 * https://lore.kernel.org/all/20230127181244.160887-1-sebastian.reichel@collabora.com/
 * rebased to v6.3-rc1
 * add Lee Jones' Acked-by-for-MFD to patches 5 & 6
 * add Linus Walleij Acked-by to patch 9
 * fix review comments provided by Lee Jones
   - remove spaces around ## in RK806_CMD_WITH_SIZE
   - add spaces around - in RK806_CMD_WITH_SIZE
   - change regmap init error message
   - further improve readability of buffer handling in rk806_spi_bus_write
   - use define for maximum buffer size
 * add .max_register to regmap_config, so that they can be analyzed in debugfs
 * switch to 16 bit register addresses to further simplify the code
 * fix max. buffer size by using RK806_CMD_LEN_MSK,
   which is 4 bit (max. 16 bytes) instead of 7 bit (max. 128 bytes)
 * add RK806_CMD_CRC_DIS to RK806_CMD_WITH_SIZE define to explicitly
   initialize all bits of the command byte

Changelog since PATCHv5:
 * https://lore.kernel.org/all/20230109172723.60304-1-sebastian.reichel@collabora.com/
 * add Reviewed-by from Rob Herring to the rk806 DT binding patch
 * drop useless wrapper functions for rk8xx_i2c_suspend and rk8xx_i2c_resume
 * put .num_resources after .resources for rk806_pwrkey_resources
 * simplify dual_support logic by storing IRQF_SHARED or 0 instead of bool
 * add missing spaces around + and - in rk806
 * add new patch using device_get_match_data() in rk8xx-i2c and removing
   the pointless dev_info printing the chip version
 * call devm_mfd_add_devices() with id=0 and rely on mfd_cell to have the .id
   field configured to either PLATFORM_DEVID_AUTO or PLATFORM_DEVID_NONE
 * add check if more than 128 bytes are tried to be received/sent, which would
   overflow the command register
 * add RK806_CMD_WITH_SIZE() define

Changelog since PATCHv4:
 * https://lore.kernel.org/all/20221020204251.108565-1-sebastian.reichel@collabora.com/
 * rebase to v6.2-rc1
   - dropped 'regulator: rk808: reduce 'struct rk808' usage' (queued to 6.2-rc1)
   - dropped 'regulator: rk808: Use dev_err_probe' (queued to 6.2-rc1)
   - dropped 'rtc: rk808: reduce 'struct rk808' usage' (queued to 6.2-rc1)
 * use 'MFD_RK8XX' for the MFD driver supporting all the MFD8XX chips
 * added author tags to drivers/mfd/rk8xx-core.c. They were missing because
   I moved the original header over to the i2c specific file and wrote the
   new header from scratch. I suppose it's better to have the author tags
   in both files.
 * fix Rob's comments for the rk806 YAML binding
 * add defines for rk806 command indexes
 * modify rk806 code, so that it is capable of mult-write

Changelog since PATCHv3:
 * https://lore.kernel.org/all/20220909175522.179175-1-sebastian.reichel@collabora.com/
 * Dropped removing REGMAP_I2C dependency from RK817 ASoC driver (applied)
 * Rename MFD_RK808 to MFD_RK8XX to be consistent. It makes sense to do this now,
   since the patchset touches all the child drivers anyways.
 * rebase to v6.1-rc1
 * collected a couple of Acks
 * update rk806 DT binding according to DT maintainer feedback
 * add missing pinmux config to the rk806 DT binding
 * update rk806_spi_bus_write and rk806_spi_bus_read
 * replaced some constants with sizeof or defines
 * used capitalized comments
 * rename regmap_find_closest_bigger to regulator_find_closest_bigger, not sure
   why I prefixed it with regmap_ in the first place
 * use rk8xx_is_enabled_wmsk_regmap instead of regulator_is_enabled_regmap for
   the switching regulators to correctly report the state
 * reordered the first few patches grouping the MFD patches together

Changelog since PATCHv2:
 * https://lore.kernel.org/all/20220908003107.220143-1-sebastian.reichel@collabora.com/
 * Change DT binding to not allow nldo-reg6
 * Fix DT binding to check for [np]ldo-reg instead of [np]ldo_reg
 * remove rk806_get_voltage_sel_regmap in favour of regulator_get_voltage_sel_regmap
 * drop rk806_set_voltage in favour of regulator_set_voltage_sel_regmap
 * use regulator_set_ramp_delay_regmap
 * drop possibly incorrect printing of chip id register address in case of errors

Changelog since PATCHv1:
 * https://lore.kernel.org/all/20220831215437.117880-1-sebastian.reichel@collabora.com/
 * Collect Acked-by
 * Avoid if/else checks for regulator id in rk806 regulator driver
 * Fix indentation in DTS example section of the rk806 binding
 * Use absolute path for regulator.yaml referencing in the rk806 binding
 * Reduce pattern for DCDC regulators to only allow 1-10
 * replace uppercase name with lowercase ones in regulator names
 * replace _ with - in regulator names

-- Sebastian

Sebastian Reichel (14):
  clk: RK808: reduce 'struct rk808' usage
  mfd: rk808: convert to device managed resources
  mfd: rk808: use dev_err_probe
  mfd: rk808: replace 'struct i2c_client' with 'struct device'
  mfd: rk808: split into core and i2c
  mfd: rk8xx-i2c: use device_get_match_data
  dt-bindings: mfd: add rk806 binding
  mfd: rk8xx: add rk806 support
  pinctrl: rk805: add rk806 pinctrl support
  regulator: expose regulator_find_closest_bigger
  regulator: rk808: fix asynchronous probing
  regulator: rk808: cleanup parent device usage
  regulator: rk808: revert to synchronous probing
  regulator: rk808: add rk806 support

 .../bindings/mfd/rockchip,rk806.yaml          | 406 +++++++++++++++++
 drivers/clk/Kconfig                           |   2 +-
 drivers/clk/clk-rk808.c                       |  34 +-
 drivers/input/misc/Kconfig                    |   2 +-
 drivers/mfd/Kconfig                           |  21 +-
 drivers/mfd/Makefile                          |   4 +-
 drivers/mfd/{rk808.c => rk8xx-core.c}         | 352 +++++----------
 drivers/mfd/rk8xx-i2c.c                       | 185 ++++++++
 drivers/mfd/rk8xx-spi.c                       | 124 ++++++
 drivers/pinctrl/Kconfig                       |   2 +-
 drivers/pinctrl/pinctrl-rk805.c               | 189 +++++++-
 drivers/power/supply/Kconfig                  |   2 +-
 drivers/regulator/Kconfig                     |   2 +-
 drivers/regulator/helpers.c                   |  22 +-
 drivers/regulator/rk808-regulator.c           | 399 ++++++++++++++++-
 drivers/rtc/Kconfig                           |   2 +-
 include/linux/mfd/rk808.h                     | 417 +++++++++++++++++-
 include/linux/regulator/driver.h              |   2 +
 sound/soc/codecs/Kconfig                      |   2 +-
 19 files changed, 1876 insertions(+), 293 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mfd/rockchip,rk806.yaml
 rename drivers/mfd/{rk808.c => rk8xx-core.c} (71%)
 create mode 100644 drivers/mfd/rk8xx-i2c.c
 create mode 100644 drivers/mfd/rk8xx-spi.c

-- 
2.39.2


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

^ permalink raw reply	[flat|nested] 35+ messages in thread

* [PATCH v8 01/14] clk: RK808: reduce 'struct rk808' usage
  2023-05-04 17:36 [PATCH v8 00/14] mfd/pinctrl/regulator: Add RK806 Support Sebastian Reichel
@ 2023-05-04 17:36 ` Sebastian Reichel
  2023-05-15 15:14   ` Lee Jones
  2023-05-04 17:36 ` [PATCH v8 02/14] mfd: rk808: convert to device managed resources Sebastian Reichel
                   ` (14 subsequent siblings)
  15 siblings, 1 reply; 35+ messages in thread
From: Sebastian Reichel @ 2023-05-04 17:36 UTC (permalink / raw)
  To: Heiko Stuebner, Rob Herring, Krzysztof Kozlowski, Lee Jones
  Cc: Michael Turquette, Stephen Boyd, Linus Walleij, Mark Brown,
	Liam Girdwood, Alexandre Belloni, Alessandro Zummo,
	linux-rockchip, devicetree, linux-kernel, Sebastian Reichel,
	kernel, Diederik de Haas, Vincent Legoll

Reduce usage of 'struct rk808' (driver data of the parent MFD), so
that only the chip variant field is still being accessed directly.
This allows restructuring the MFD driver to support SPI based
PMICs.

Acked-by: Stephen Boyd <sboyd@kernel.org>
Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, Quartz64 Model A + B
Tested-by: Vincent Legoll <vincent.legoll@gmail.com> # Pine64 QuartzPro64
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/clk/clk-rk808.c | 34 ++++++++++++++++------------------
 1 file changed, 16 insertions(+), 18 deletions(-)

diff --git a/drivers/clk/clk-rk808.c b/drivers/clk/clk-rk808.c
index 32f833d732ed..f7412b137e5e 100644
--- a/drivers/clk/clk-rk808.c
+++ b/drivers/clk/clk-rk808.c
@@ -12,10 +12,9 @@
 #include <linux/slab.h>
 #include <linux/platform_device.h>
 #include <linux/mfd/rk808.h>
-#include <linux/i2c.h>
 
 struct rk808_clkout {
-	struct rk808 *rk808;
+	struct regmap		*regmap;
 	struct clk_hw		clkout1_hw;
 	struct clk_hw		clkout2_hw;
 };
@@ -31,9 +30,8 @@ static int rk808_clkout2_enable(struct clk_hw *hw, bool enable)
 	struct rk808_clkout *rk808_clkout = container_of(hw,
 							 struct rk808_clkout,
 							 clkout2_hw);
-	struct rk808 *rk808 = rk808_clkout->rk808;
 
-	return regmap_update_bits(rk808->regmap, RK808_CLK32OUT_REG,
+	return regmap_update_bits(rk808_clkout->regmap, RK808_CLK32OUT_REG,
 				  CLK32KOUT2_EN, enable ? CLK32KOUT2_EN : 0);
 }
 
@@ -52,10 +50,9 @@ static int rk808_clkout2_is_prepared(struct clk_hw *hw)
 	struct rk808_clkout *rk808_clkout = container_of(hw,
 							 struct rk808_clkout,
 							 clkout2_hw);
-	struct rk808 *rk808 = rk808_clkout->rk808;
 	uint32_t val;
 
-	int ret = regmap_read(rk808->regmap, RK808_CLK32OUT_REG, &val);
+	int ret = regmap_read(rk808_clkout->regmap, RK808_CLK32OUT_REG, &val);
 
 	if (ret < 0)
 		return ret;
@@ -93,9 +90,8 @@ static int rk817_clkout2_enable(struct clk_hw *hw, bool enable)
 	struct rk808_clkout *rk808_clkout = container_of(hw,
 							 struct rk808_clkout,
 							 clkout2_hw);
-	struct rk808 *rk808 = rk808_clkout->rk808;
 
-	return regmap_update_bits(rk808->regmap, RK817_SYS_CFG(1),
+	return regmap_update_bits(rk808_clkout->regmap, RK817_SYS_CFG(1),
 				  RK817_CLK32KOUT2_EN,
 				  enable ? RK817_CLK32KOUT2_EN : 0);
 }
@@ -115,10 +111,9 @@ static int rk817_clkout2_is_prepared(struct clk_hw *hw)
 	struct rk808_clkout *rk808_clkout = container_of(hw,
 							 struct rk808_clkout,
 							 clkout2_hw);
-	struct rk808 *rk808 = rk808_clkout->rk808;
 	unsigned int val;
 
-	int ret = regmap_read(rk808->regmap, RK817_SYS_CFG(1), &val);
+	int ret = regmap_read(rk808_clkout->regmap, RK817_SYS_CFG(1), &val);
 
 	if (ret < 0)
 		return 0;
@@ -153,18 +148,21 @@ static const struct clk_ops *rkpmic_get_ops(long variant)
 static int rk808_clkout_probe(struct platform_device *pdev)
 {
 	struct rk808 *rk808 = dev_get_drvdata(pdev->dev.parent);
-	struct i2c_client *client = rk808->i2c;
-	struct device_node *node = client->dev.of_node;
+	struct device *dev = &pdev->dev;
 	struct clk_init_data init = {};
 	struct rk808_clkout *rk808_clkout;
 	int ret;
 
-	rk808_clkout = devm_kzalloc(&client->dev,
+	dev->of_node = pdev->dev.parent->of_node;
+
+	rk808_clkout = devm_kzalloc(dev,
 				    sizeof(*rk808_clkout), GFP_KERNEL);
 	if (!rk808_clkout)
 		return -ENOMEM;
 
-	rk808_clkout->rk808 = rk808;
+	rk808_clkout->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!rk808_clkout->regmap)
+		return -ENODEV;
 
 	init.parent_names = NULL;
 	init.num_parents = 0;
@@ -173,10 +171,10 @@ static int rk808_clkout_probe(struct platform_device *pdev)
 	rk808_clkout->clkout1_hw.init = &init;
 
 	/* optional override of the clockname */
-	of_property_read_string_index(node, "clock-output-names",
+	of_property_read_string_index(dev->of_node, "clock-output-names",
 				      0, &init.name);
 
-	ret = devm_clk_hw_register(&client->dev, &rk808_clkout->clkout1_hw);
+	ret = devm_clk_hw_register(dev, &rk808_clkout->clkout1_hw);
 	if (ret)
 		return ret;
 
@@ -185,10 +183,10 @@ static int rk808_clkout_probe(struct platform_device *pdev)
 	rk808_clkout->clkout2_hw.init = &init;
 
 	/* optional override of the clockname */
-	of_property_read_string_index(node, "clock-output-names",
+	of_property_read_string_index(dev->of_node, "clock-output-names",
 				      1, &init.name);
 
-	ret = devm_clk_hw_register(&client->dev, &rk808_clkout->clkout2_hw);
+	ret = devm_clk_hw_register(dev, &rk808_clkout->clkout2_hw);
 	if (ret)
 		return ret;
 
-- 
2.39.2


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v8 02/14] mfd: rk808: convert to device managed resources
  2023-05-04 17:36 [PATCH v8 00/14] mfd/pinctrl/regulator: Add RK806 Support Sebastian Reichel
  2023-05-04 17:36 ` [PATCH v8 01/14] clk: RK808: reduce 'struct rk808' usage Sebastian Reichel
@ 2023-05-04 17:36 ` Sebastian Reichel
  2023-05-15 15:17   ` Lee Jones
  2023-05-04 17:36 ` [PATCH v8 03/14] mfd: rk808: use dev_err_probe Sebastian Reichel
                   ` (13 subsequent siblings)
  15 siblings, 1 reply; 35+ messages in thread
From: Sebastian Reichel @ 2023-05-04 17:36 UTC (permalink / raw)
  To: Heiko Stuebner, Rob Herring, Krzysztof Kozlowski, Lee Jones
  Cc: Michael Turquette, Stephen Boyd, Linus Walleij, Mark Brown,
	Liam Girdwood, Alexandre Belloni, Alessandro Zummo,
	linux-rockchip, devicetree, linux-kernel, Sebastian Reichel,
	kernel, Diederik de Haas, Vincent Legoll

Fully convert the driver to device managed resources.

Acked-for-MFD-by: Lee Jones <lee@kernel.org>
Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, Quartz64 Model A + B
Tested-by: Vincent Legoll <vincent.legoll@gmail.com> # Pine64 QuartzPro64
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/mfd/rk808.c | 64 ++++++++++++++++-----------------------------
 1 file changed, 22 insertions(+), 42 deletions(-)

diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c
index 0f22ef61e817..a996a43f9204 100644
--- a/drivers/mfd/rk808.c
+++ b/drivers/mfd/rk808.c
@@ -548,13 +548,11 @@ static const struct regmap_irq_chip rk818_irq_chip = {
 	.init_ack_masked = true,
 };
 
-static struct i2c_client *rk808_i2c_client;
-
-static void rk808_pm_power_off(void)
+static int rk808_power_off(struct sys_off_data *data)
 {
+	struct rk808 *rk808 = data->cb_data;
 	int ret;
 	unsigned int reg, bit;
-	struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client);
 
 	switch (rk808->variant) {
 	case RK805_ID:
@@ -575,16 +573,18 @@ static void rk808_pm_power_off(void)
 		bit = DEV_OFF;
 		break;
 	default:
-		return;
+		return NOTIFY_DONE;
 	}
 	ret = regmap_update_bits(rk808->regmap, reg, bit, bit);
 	if (ret)
-		dev_err(&rk808_i2c_client->dev, "Failed to shutdown device!\n");
+		dev_err(&rk808->i2c->dev, "Failed to shutdown device!\n");
+
+	return NOTIFY_DONE;
 }
 
-static int rk808_restart_notify(struct notifier_block *this, unsigned long mode, void *cmd)
+static int rk808_restart(struct sys_off_data *data)
 {
-	struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client);
+	struct rk808 *rk808 = data->cb_data;
 	unsigned int reg, bit;
 	int ret;
 
@@ -600,16 +600,11 @@ static int rk808_restart_notify(struct notifier_block *this, unsigned long mode,
 	}
 	ret = regmap_update_bits(rk808->regmap, reg, bit, bit);
 	if (ret)
-		dev_err(&rk808_i2c_client->dev, "Failed to restart device!\n");
+		dev_err(&rk808->i2c->dev, "Failed to restart device!\n");
 
 	return NOTIFY_DONE;
 }
 
-static struct notifier_block rk808_restart_handler = {
-	.notifier_call = rk808_restart_notify,
-	.priority = 192,
-};
-
 static void rk8xx_shutdown(struct i2c_client *client)
 {
 	struct rk808 *rk808 = i2c_get_clientdata(client);
@@ -745,9 +740,9 @@ static int rk808_probe(struct i2c_client *client)
 		return -EINVAL;
 	}
 
-	ret = regmap_add_irq_chip(rk808->regmap, client->irq,
-				  IRQF_ONESHOT, -1,
-				  rk808->regmap_irq_chip, &rk808->irq_data);
+	ret = devm_regmap_add_irq_chip(&client->dev, rk808->regmap, client->irq,
+				       IRQF_ONESHOT, -1,
+				       rk808->regmap_irq_chip, &rk808->irq_data);
 	if (ret) {
 		dev_err(&client->dev, "Failed to add irq_chip %d\n", ret);
 		return ret;
@@ -771,17 +766,23 @@ static int rk808_probe(struct i2c_client *client)
 			      regmap_irq_get_domain(rk808->irq_data));
 	if (ret) {
 		dev_err(&client->dev, "failed to add MFD devices %d\n", ret);
-		goto err_irq;
+		return ret;
 	}
 
 	if (of_property_read_bool(np, "rockchip,system-power-controller")) {
-		rk808_i2c_client = client;
-		pm_power_off = rk808_pm_power_off;
+		ret = devm_register_sys_off_handler(&client->dev,
+				    SYS_OFF_MODE_POWER_OFF_PREPARE, SYS_OFF_PRIO_HIGH,
+				    &rk808_power_off, rk808);
+		if (ret)
+			return dev_err_probe(&client->dev, ret,
+					     "failed to register poweroff handler\n");
 
 		switch (rk808->variant) {
 		case RK809_ID:
 		case RK817_ID:
-			ret = register_restart_handler(&rk808_restart_handler);
+			ret = devm_register_sys_off_handler(&client->dev,
+							    SYS_OFF_MODE_RESTART, SYS_OFF_PRIO_HIGH,
+							    &rk808_restart, rk808);
 			if (ret)
 				dev_warn(&client->dev, "failed to register rst handler, %d\n", ret);
 			break;
@@ -792,26 +793,6 @@ static int rk808_probe(struct i2c_client *client)
 	}
 
 	return 0;
-
-err_irq:
-	regmap_del_irq_chip(client->irq, rk808->irq_data);
-	return ret;
-}
-
-static void rk808_remove(struct i2c_client *client)
-{
-	struct rk808 *rk808 = i2c_get_clientdata(client);
-
-	regmap_del_irq_chip(client->irq, rk808->irq_data);
-
-	/**
-	 * pm_power_off may points to a function from another module.
-	 * Check if the pointer is set by us and only then overwrite it.
-	 */
-	if (pm_power_off == rk808_pm_power_off)
-		pm_power_off = NULL;
-
-	unregister_restart_handler(&rk808_restart_handler);
 }
 
 static int __maybe_unused rk8xx_suspend(struct device *dev)
@@ -868,7 +849,6 @@ static struct i2c_driver rk808_i2c_driver = {
 		.pm = &rk8xx_pm_ops,
 	},
 	.probe_new = rk808_probe,
-	.remove   = rk808_remove,
 	.shutdown = rk8xx_shutdown,
 };
 
-- 
2.39.2


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v8 03/14] mfd: rk808: use dev_err_probe
  2023-05-04 17:36 [PATCH v8 00/14] mfd/pinctrl/regulator: Add RK806 Support Sebastian Reichel
  2023-05-04 17:36 ` [PATCH v8 01/14] clk: RK808: reduce 'struct rk808' usage Sebastian Reichel
  2023-05-04 17:36 ` [PATCH v8 02/14] mfd: rk808: convert to device managed resources Sebastian Reichel
@ 2023-05-04 17:36 ` Sebastian Reichel
  2023-05-15 15:18   ` Lee Jones
  2023-05-04 17:36 ` [PATCH v8 04/14] mfd: rk808: replace 'struct i2c_client' with 'struct device' Sebastian Reichel
                   ` (12 subsequent siblings)
  15 siblings, 1 reply; 35+ messages in thread
From: Sebastian Reichel @ 2023-05-04 17:36 UTC (permalink / raw)
  To: Heiko Stuebner, Rob Herring, Krzysztof Kozlowski, Lee Jones
  Cc: Michael Turquette, Stephen Boyd, Linus Walleij, Mark Brown,
	Liam Girdwood, Alexandre Belloni, Alessandro Zummo,
	linux-rockchip, devicetree, linux-kernel, Sebastian Reichel,
	kernel, Diederik de Haas, Vincent Legoll

Use dev_err_probe instead of dev_err in probe function,
which simplifies code a little bit and prints the error
code.

Also drop possibly incorrect printing of chip id registers
while touching the error message.

Acked-for-MFD-by: Lee Jones <lee@kernel.org>
Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, Quartz64 Model A + B
Tested-by: Vincent Legoll <vincent.legoll@gmail.com> # Pine64 QuartzPro64
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/mfd/rk808.c | 48 +++++++++++++++------------------------------
 1 file changed, 16 insertions(+), 32 deletions(-)

diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c
index a996a43f9204..f42e09e3a3f5 100644
--- a/drivers/mfd/rk808.c
+++ b/drivers/mfd/rk808.c
@@ -670,18 +670,12 @@ static int rk808_probe(struct i2c_client *client)
 
 	/* Read chip variant */
 	msb = i2c_smbus_read_byte_data(client, pmic_id_msb);
-	if (msb < 0) {
-		dev_err(&client->dev, "failed to read the chip id at 0x%x\n",
-			RK808_ID_MSB);
-		return msb;
-	}
+	if (msb < 0)
+		return dev_err_probe(&client->dev, msb, "failed to read the chip id MSB\n");
 
 	lsb = i2c_smbus_read_byte_data(client, pmic_id_lsb);
-	if (lsb < 0) {
-		dev_err(&client->dev, "failed to read the chip id at 0x%x\n",
-			RK808_ID_LSB);
-		return lsb;
-	}
+	if (lsb < 0)
+		return dev_err_probe(&client->dev, lsb, "failed to read the chip id LSB\n");
 
 	rk808->variant = ((msb << 8) | lsb) & RK8XX_ID_MSK;
 	dev_info(&client->dev, "chip id: 0x%x\n", (unsigned int)rk808->variant);
@@ -730,44 +724,34 @@ static int rk808_probe(struct i2c_client *client)
 	i2c_set_clientdata(client, rk808);
 
 	rk808->regmap = devm_regmap_init_i2c(client, rk808->regmap_cfg);
-	if (IS_ERR(rk808->regmap)) {
-		dev_err(&client->dev, "regmap initialization failed\n");
-		return PTR_ERR(rk808->regmap);
-	}
+	if (IS_ERR(rk808->regmap))
+		return dev_err_probe(&client->dev, PTR_ERR(rk808->regmap),
+				     "regmap initialization failed\n");
 
-	if (!client->irq) {
-		dev_err(&client->dev, "No interrupt support, no core IRQ\n");
-		return -EINVAL;
-	}
+	if (!client->irq)
+		return dev_err_probe(&client->dev, -EINVAL, "No interrupt support, no core IRQ\n");
 
 	ret = devm_regmap_add_irq_chip(&client->dev, rk808->regmap, client->irq,
 				       IRQF_ONESHOT, -1,
 				       rk808->regmap_irq_chip, &rk808->irq_data);
-	if (ret) {
-		dev_err(&client->dev, "Failed to add irq_chip %d\n", ret);
-		return ret;
-	}
+	if (ret)
+		return dev_err_probe(&client->dev, ret, "Failed to add irq_chip\n");
 
 	for (i = 0; i < nr_pre_init_regs; i++) {
 		ret = regmap_update_bits(rk808->regmap,
 					pre_init_reg[i].addr,
 					pre_init_reg[i].mask,
 					pre_init_reg[i].value);
-		if (ret) {
-			dev_err(&client->dev,
-				"0x%x write err\n",
-				pre_init_reg[i].addr);
-			return ret;
-		}
+		if (ret)
+			return dev_err_probe(&client->dev, ret, "0x%x write err\n",
+					     pre_init_reg[i].addr);
 	}
 
 	ret = devm_mfd_add_devices(&client->dev, PLATFORM_DEVID_NONE,
 			      cells, nr_cells, NULL, 0,
 			      regmap_irq_get_domain(rk808->irq_data));
-	if (ret) {
-		dev_err(&client->dev, "failed to add MFD devices %d\n", ret);
-		return ret;
-	}
+	if (ret)
+		return dev_err_probe(&client->dev, ret, "failed to add MFD devices\n");
 
 	if (of_property_read_bool(np, "rockchip,system-power-controller")) {
 		ret = devm_register_sys_off_handler(&client->dev,
-- 
2.39.2


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v8 04/14] mfd: rk808: replace 'struct i2c_client' with 'struct device'
  2023-05-04 17:36 [PATCH v8 00/14] mfd/pinctrl/regulator: Add RK806 Support Sebastian Reichel
                   ` (2 preceding siblings ...)
  2023-05-04 17:36 ` [PATCH v8 03/14] mfd: rk808: use dev_err_probe Sebastian Reichel
@ 2023-05-04 17:36 ` Sebastian Reichel
  2023-05-15 15:18   ` Lee Jones
  2023-05-04 17:36 ` [PATCH v8 05/14] mfd: rk808: split into core and i2c Sebastian Reichel
                   ` (11 subsequent siblings)
  15 siblings, 1 reply; 35+ messages in thread
From: Sebastian Reichel @ 2023-05-04 17:36 UTC (permalink / raw)
  To: Heiko Stuebner, Rob Herring, Krzysztof Kozlowski, Lee Jones
  Cc: Michael Turquette, Stephen Boyd, Linus Walleij, Mark Brown,
	Liam Girdwood, Alexandre Belloni, Alessandro Zummo,
	linux-rockchip, devicetree, linux-kernel, Sebastian Reichel,
	kernel, Diederik de Haas, Vincent Legoll

Put 'struct device' pointer into the MFD platform_data instead
of the 'struct i2c_client' pointer. This simplifies the code
and prepares the MFD for SPI support.

Acked-for-MFD-by: Lee Jones <lee@kernel.org>
Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, Quartz64 Model A + B
Tested-by: Vincent Legoll <vincent.legoll@gmail.com> # Pine64 QuartzPro64
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/mfd/rk808.c       | 6 +++---
 include/linux/mfd/rk808.h | 2 +-
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c
index f42e09e3a3f5..ce52307cbaea 100644
--- a/drivers/mfd/rk808.c
+++ b/drivers/mfd/rk808.c
@@ -577,7 +577,7 @@ static int rk808_power_off(struct sys_off_data *data)
 	}
 	ret = regmap_update_bits(rk808->regmap, reg, bit, bit);
 	if (ret)
-		dev_err(&rk808->i2c->dev, "Failed to shutdown device!\n");
+		dev_err(rk808->dev, "Failed to shutdown device!\n");
 
 	return NOTIFY_DONE;
 }
@@ -600,7 +600,7 @@ static int rk808_restart(struct sys_off_data *data)
 	}
 	ret = regmap_update_bits(rk808->regmap, reg, bit, bit);
 	if (ret)
-		dev_err(&rk808->i2c->dev, "Failed to restart device!\n");
+		dev_err(rk808->dev, "Failed to restart device!\n");
 
 	return NOTIFY_DONE;
 }
@@ -720,7 +720,7 @@ static int rk808_probe(struct i2c_client *client)
 		return -EINVAL;
 	}
 
-	rk808->i2c = client;
+	rk808->dev = &client->dev;
 	i2c_set_clientdata(client, rk808);
 
 	rk808->regmap = devm_regmap_init_i2c(client, rk808->regmap_cfg);
diff --git a/include/linux/mfd/rk808.h b/include/linux/mfd/rk808.h
index 9af1f3105f80..a89ddd9ba68e 100644
--- a/include/linux/mfd/rk808.h
+++ b/include/linux/mfd/rk808.h
@@ -787,7 +787,7 @@ enum {
 };
 
 struct rk808 {
-	struct i2c_client		*i2c;
+	struct device			*dev;
 	struct regmap_irq_chip_data	*irq_data;
 	struct regmap			*regmap;
 	long				variant;
-- 
2.39.2


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v8 05/14] mfd: rk808: split into core and i2c
  2023-05-04 17:36 [PATCH v8 00/14] mfd/pinctrl/regulator: Add RK806 Support Sebastian Reichel
                   ` (3 preceding siblings ...)
  2023-05-04 17:36 ` [PATCH v8 04/14] mfd: rk808: replace 'struct i2c_client' with 'struct device' Sebastian Reichel
@ 2023-05-04 17:36 ` Sebastian Reichel
  2023-05-15 15:19   ` Lee Jones
                     ` (2 more replies)
  2023-05-04 17:36 ` [PATCH v8 06/14] mfd: rk8xx-i2c: use device_get_match_data Sebastian Reichel
                   ` (10 subsequent siblings)
  15 siblings, 3 replies; 35+ messages in thread
From: Sebastian Reichel @ 2023-05-04 17:36 UTC (permalink / raw)
  To: Heiko Stuebner, Rob Herring, Krzysztof Kozlowski, Lee Jones
  Cc: Michael Turquette, Stephen Boyd, Linus Walleij, Mark Brown,
	Liam Girdwood, Alexandre Belloni, Alessandro Zummo,
	linux-rockchip, devicetree, linux-kernel, Sebastian Reichel,
	kernel, Diederik de Haas, Vincent Legoll

Split rk808 into a core and an i2c part in preparation for
SPI support.

Acked-for-MFD-by: Lee Jones <lee@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> # for RTC
Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, Quartz64 Model A + B
Tested-by: Vincent Legoll <vincent.legoll@gmail.com> # Pine64 QuartzPro64
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/clk/Kconfig                   |   2 +-
 drivers/input/misc/Kconfig            |   2 +-
 drivers/mfd/Kconfig                   |   7 +-
 drivers/mfd/Makefile                  |   3 +-
 drivers/mfd/{rk808.c => rk8xx-core.c} | 209 +++++---------------------
 drivers/mfd/rk8xx-i2c.c               | 200 ++++++++++++++++++++++++
 drivers/pinctrl/Kconfig               |   2 +-
 drivers/power/supply/Kconfig          |   2 +-
 drivers/regulator/Kconfig             |   2 +-
 drivers/rtc/Kconfig                   |   2 +-
 include/linux/mfd/rk808.h             |   6 +
 sound/soc/codecs/Kconfig              |   2 +-
 12 files changed, 256 insertions(+), 183 deletions(-)
 rename drivers/mfd/{rk808.c => rk8xx-core.c} (76%)
 create mode 100644 drivers/mfd/rk8xx-i2c.c

diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 016814e15536..c0c8e526a1e9 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -82,7 +82,7 @@ config COMMON_CLK_MAX9485
 
 config COMMON_CLK_RK808
 	tristate "Clock driver for RK805/RK808/RK809/RK817/RK818"
-	depends on MFD_RK808
+	depends on MFD_RK8XX
 	help
 	  This driver supports RK805, RK809 and RK817, RK808 and RK818 crystal oscillator clock.
 	  These multi-function devices have two fixed-rate oscillators, clocked at 32KHz each.
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 81a54a59e13c..8a320e6218e3 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -609,7 +609,7 @@ config INPUT_PWM_VIBRA
 
 config INPUT_RK805_PWRKEY
 	tristate "Rockchip RK805 PMIC power key support"
-	depends on MFD_RK808
+	depends on MFD_RK8XX
 	help
 	  Select this option to enable power key driver for RK805.
 
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index e90463c4441c..de53e6c701fd 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1183,12 +1183,17 @@ config MFD_RC5T583
 	  Additional drivers must be enabled in order to use the
 	  different functionality of the device.
 
-config MFD_RK808
+config MFD_RK8XX
+	bool
+	select MFD_CORE
+
+config MFD_RK8XX_I2C
 	tristate "Rockchip RK805/RK808/RK809/RK817/RK818 Power Management Chip"
 	depends on I2C && OF
 	select MFD_CORE
 	select REGMAP_I2C
 	select REGMAP_IRQ
+	select MFD_RK8XX
 	help
 	  If you say yes here you get support for the RK805, RK808, RK809,
 	  RK817 and RK818 Power Management chips.
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 1d2392f06f78..ba373193e999 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -214,7 +214,8 @@ obj-$(CONFIG_MFD_PALMAS)	+= palmas.o
 obj-$(CONFIG_MFD_VIPERBOARD)    += viperboard.o
 obj-$(CONFIG_MFD_NTXEC)		+= ntxec.o
 obj-$(CONFIG_MFD_RC5T583)	+= rc5t583.o rc5t583-irq.o
-obj-$(CONFIG_MFD_RK808)		+= rk808.o
+obj-$(CONFIG_MFD_RK8XX)		+= rk8xx-core.o
+obj-$(CONFIG_MFD_RK8XX_I2C)	+= rk8xx-i2c.o
 obj-$(CONFIG_MFD_RN5T618)	+= rn5t618.o
 obj-$(CONFIG_MFD_SEC_CORE)	+= sec-core.o sec-irq.o
 obj-$(CONFIG_MFD_SYSCON)	+= syscon.o
diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk8xx-core.c
similarity index 76%
rename from drivers/mfd/rk808.c
rename to drivers/mfd/rk8xx-core.c
index ce52307cbaea..5c0a5acef34c 100644
--- a/drivers/mfd/rk808.c
+++ b/drivers/mfd/rk8xx-core.c
@@ -1,18 +1,15 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * MFD core driver for Rockchip RK808/RK818
+ * MFD core driver for Rockchip RK8XX
  *
  * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (C) 2016 PHYTEC Messtechnik GmbH
  *
  * Author: Chris Zhong <zyw@rock-chips.com>
  * Author: Zhang Qing <zhangqing@rock-chips.com>
- *
- * Copyright (C) 2016 PHYTEC Messtechnik GmbH
- *
  * Author: Wadim Egorov <w.egorov@phytec.de>
  */
 
-#include <linux/i2c.h>
 #include <linux/interrupt.h>
 #include <linux/mfd/rk808.h>
 #include <linux/mfd/core.h>
@@ -27,92 +24,6 @@ struct rk808_reg_data {
 	int value;
 };
 
-static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
-{
-	/*
-	 * Notes:
-	 * - Technically the ROUND_30s bit makes RTC_CTRL_REG volatile, but
-	 *   we don't use that feature.  It's better to cache.
-	 * - It's unlikely we care that RK808_DEVCTRL_REG is volatile since
-	 *   bits are cleared in case when we shutoff anyway, but better safe.
-	 */
-
-	switch (reg) {
-	case RK808_SECONDS_REG ... RK808_WEEKS_REG:
-	case RK808_RTC_STATUS_REG:
-	case RK808_VB_MON_REG:
-	case RK808_THERMAL_REG:
-	case RK808_DCDC_UV_STS_REG:
-	case RK808_LDO_UV_STS_REG:
-	case RK808_DCDC_PG_REG:
-	case RK808_LDO_PG_REG:
-	case RK808_DEVCTRL_REG:
-	case RK808_INT_STS_REG1:
-	case RK808_INT_STS_REG2:
-		return true;
-	}
-
-	return false;
-}
-
-static bool rk817_is_volatile_reg(struct device *dev, unsigned int reg)
-{
-	/*
-	 * Notes:
-	 * - Technically the ROUND_30s bit makes RTC_CTRL_REG volatile, but
-	 *   we don't use that feature.  It's better to cache.
-	 */
-
-	switch (reg) {
-	case RK817_SECONDS_REG ... RK817_WEEKS_REG:
-	case RK817_RTC_STATUS_REG:
-	case RK817_CODEC_DTOP_LPT_SRST:
-	case RK817_GAS_GAUGE_ADC_CONFIG0 ... RK817_GAS_GAUGE_CUR_ADC_K0:
-	case RK817_PMIC_CHRG_STS:
-	case RK817_PMIC_CHRG_OUT:
-	case RK817_PMIC_CHRG_IN:
-	case RK817_INT_STS_REG0:
-	case RK817_INT_STS_REG1:
-	case RK817_INT_STS_REG2:
-	case RK817_SYS_STS:
-		return true;
-	}
-
-	return false;
-}
-
-static const struct regmap_config rk818_regmap_config = {
-	.reg_bits = 8,
-	.val_bits = 8,
-	.max_register = RK818_USB_CTRL_REG,
-	.cache_type = REGCACHE_RBTREE,
-	.volatile_reg = rk808_is_volatile_reg,
-};
-
-static const struct regmap_config rk805_regmap_config = {
-	.reg_bits = 8,
-	.val_bits = 8,
-	.max_register = RK805_OFF_SOURCE_REG,
-	.cache_type = REGCACHE_RBTREE,
-	.volatile_reg = rk808_is_volatile_reg,
-};
-
-static const struct regmap_config rk808_regmap_config = {
-	.reg_bits = 8,
-	.val_bits = 8,
-	.max_register = RK808_IO_POL_REG,
-	.cache_type = REGCACHE_RBTREE,
-	.volatile_reg = rk808_is_volatile_reg,
-};
-
-static const struct regmap_config rk817_regmap_config = {
-	.reg_bits = 8,
-	.val_bits = 8,
-	.max_register = RK817_GPIO_INT_CFG,
-	.cache_type = REGCACHE_NONE,
-	.volatile_reg = rk817_is_volatile_reg,
-};
-
 static const struct resource rtc_resources[] = {
 	DEFINE_RES_IRQ(RK808_IRQ_RTC_ALARM),
 };
@@ -605,9 +516,9 @@ static int rk808_restart(struct sys_off_data *data)
 	return NOTIFY_DONE;
 }
 
-static void rk8xx_shutdown(struct i2c_client *client)
+void rk8xx_shutdown(struct device *dev)
 {
-	struct rk808 *rk808 = i2c_get_clientdata(client);
+	struct rk808 *rk808 = dev_get_drvdata(dev);
 	int ret;
 
 	switch (rk808->variant) {
@@ -628,61 +539,31 @@ static void rk8xx_shutdown(struct i2c_client *client)
 		return;
 	}
 	if (ret)
-		dev_warn(&client->dev,
+		dev_warn(dev,
 			 "Cannot switch to power down function\n");
 }
+EXPORT_SYMBOL_GPL(rk8xx_shutdown);
 
-static const struct of_device_id rk808_of_match[] = {
-	{ .compatible = "rockchip,rk805" },
-	{ .compatible = "rockchip,rk808" },
-	{ .compatible = "rockchip,rk809" },
-	{ .compatible = "rockchip,rk817" },
-	{ .compatible = "rockchip,rk818" },
-	{ },
-};
-MODULE_DEVICE_TABLE(of, rk808_of_match);
-
-static int rk808_probe(struct i2c_client *client)
+int rk8xx_probe(struct device *dev, int variant, unsigned int irq, struct regmap *regmap)
 {
-	struct device_node *np = client->dev.of_node;
 	struct rk808 *rk808;
 	const struct rk808_reg_data *pre_init_reg;
 	const struct mfd_cell *cells;
 	int nr_pre_init_regs;
 	int nr_cells;
-	int msb, lsb;
-	unsigned char pmic_id_msb, pmic_id_lsb;
 	int ret;
 	int i;
 
-	rk808 = devm_kzalloc(&client->dev, sizeof(*rk808), GFP_KERNEL);
+	rk808 = devm_kzalloc(dev, sizeof(*rk808), GFP_KERNEL);
 	if (!rk808)
 		return -ENOMEM;
-
-	if (of_device_is_compatible(np, "rockchip,rk817") ||
-	    of_device_is_compatible(np, "rockchip,rk809")) {
-		pmic_id_msb = RK817_ID_MSB;
-		pmic_id_lsb = RK817_ID_LSB;
-	} else {
-		pmic_id_msb = RK808_ID_MSB;
-		pmic_id_lsb = RK808_ID_LSB;
-	}
-
-	/* Read chip variant */
-	msb = i2c_smbus_read_byte_data(client, pmic_id_msb);
-	if (msb < 0)
-		return dev_err_probe(&client->dev, msb, "failed to read the chip id MSB\n");
-
-	lsb = i2c_smbus_read_byte_data(client, pmic_id_lsb);
-	if (lsb < 0)
-		return dev_err_probe(&client->dev, lsb, "failed to read the chip id LSB\n");
-
-	rk808->variant = ((msb << 8) | lsb) & RK8XX_ID_MSK;
-	dev_info(&client->dev, "chip id: 0x%x\n", (unsigned int)rk808->variant);
+	rk808->dev = dev;
+	rk808->variant = variant;
+	rk808->regmap = regmap;
+	dev_set_drvdata(dev, rk808);
 
 	switch (rk808->variant) {
 	case RK805_ID:
-		rk808->regmap_cfg = &rk805_regmap_config;
 		rk808->regmap_irq_chip = &rk805_irq_chip;
 		pre_init_reg = rk805_pre_init_reg;
 		nr_pre_init_regs = ARRAY_SIZE(rk805_pre_init_reg);
@@ -690,7 +571,6 @@ static int rk808_probe(struct i2c_client *client)
 		nr_cells = ARRAY_SIZE(rk805s);
 		break;
 	case RK808_ID:
-		rk808->regmap_cfg = &rk808_regmap_config;
 		rk808->regmap_irq_chip = &rk808_irq_chip;
 		pre_init_reg = rk808_pre_init_reg;
 		nr_pre_init_regs = ARRAY_SIZE(rk808_pre_init_reg);
@@ -698,7 +578,6 @@ static int rk808_probe(struct i2c_client *client)
 		nr_cells = ARRAY_SIZE(rk808s);
 		break;
 	case RK818_ID:
-		rk808->regmap_cfg = &rk818_regmap_config;
 		rk808->regmap_irq_chip = &rk818_irq_chip;
 		pre_init_reg = rk818_pre_init_reg;
 		nr_pre_init_regs = ARRAY_SIZE(rk818_pre_init_reg);
@@ -707,7 +586,6 @@ static int rk808_probe(struct i2c_client *client)
 		break;
 	case RK809_ID:
 	case RK817_ID:
-		rk808->regmap_cfg = &rk817_regmap_config;
 		rk808->regmap_irq_chip = &rk817_irq_chip;
 		pre_init_reg = rk817_pre_init_reg;
 		nr_pre_init_regs = ARRAY_SIZE(rk817_pre_init_reg);
@@ -715,27 +593,20 @@ static int rk808_probe(struct i2c_client *client)
 		nr_cells = ARRAY_SIZE(rk817s);
 		break;
 	default:
-		dev_err(&client->dev, "Unsupported RK8XX ID %lu\n",
-			rk808->variant);
+		dev_err(dev, "Unsupported RK8XX ID %lu\n", rk808->variant);
 		return -EINVAL;
 	}
 
-	rk808->dev = &client->dev;
-	i2c_set_clientdata(client, rk808);
-
-	rk808->regmap = devm_regmap_init_i2c(client, rk808->regmap_cfg);
-	if (IS_ERR(rk808->regmap))
-		return dev_err_probe(&client->dev, PTR_ERR(rk808->regmap),
-				     "regmap initialization failed\n");
+	dev_info(dev, "chip id: 0x%x\n", (unsigned int)rk808->variant);
 
-	if (!client->irq)
-		return dev_err_probe(&client->dev, -EINVAL, "No interrupt support, no core IRQ\n");
+	if (!irq)
+		return dev_err_probe(dev, -EINVAL, "No interrupt support, no core IRQ\n");
 
-	ret = devm_regmap_add_irq_chip(&client->dev, rk808->regmap, client->irq,
+	ret = devm_regmap_add_irq_chip(dev, rk808->regmap, irq,
 				       IRQF_ONESHOT, -1,
 				       rk808->regmap_irq_chip, &rk808->irq_data);
 	if (ret)
-		return dev_err_probe(&client->dev, ret, "Failed to add irq_chip\n");
+		return dev_err_probe(dev, ret, "Failed to add irq_chip\n");
 
 	for (i = 0; i < nr_pre_init_regs; i++) {
 		ret = regmap_update_bits(rk808->regmap,
@@ -743,45 +614,46 @@ static int rk808_probe(struct i2c_client *client)
 					pre_init_reg[i].mask,
 					pre_init_reg[i].value);
 		if (ret)
-			return dev_err_probe(&client->dev, ret, "0x%x write err\n",
+			return dev_err_probe(dev, ret, "0x%x write err\n",
 					     pre_init_reg[i].addr);
 	}
 
-	ret = devm_mfd_add_devices(&client->dev, PLATFORM_DEVID_NONE,
+	ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE,
 			      cells, nr_cells, NULL, 0,
 			      regmap_irq_get_domain(rk808->irq_data));
 	if (ret)
-		return dev_err_probe(&client->dev, ret, "failed to add MFD devices\n");
+		return dev_err_probe(dev, ret, "failed to add MFD devices\n");
 
-	if (of_property_read_bool(np, "rockchip,system-power-controller")) {
-		ret = devm_register_sys_off_handler(&client->dev,
+	if (device_property_read_bool(dev, "rockchip,system-power-controller")) {
+		ret = devm_register_sys_off_handler(dev,
 				    SYS_OFF_MODE_POWER_OFF_PREPARE, SYS_OFF_PRIO_HIGH,
 				    &rk808_power_off, rk808);
 		if (ret)
-			return dev_err_probe(&client->dev, ret,
+			return dev_err_probe(dev, ret,
 					     "failed to register poweroff handler\n");
 
 		switch (rk808->variant) {
 		case RK809_ID:
 		case RK817_ID:
-			ret = devm_register_sys_off_handler(&client->dev,
+			ret = devm_register_sys_off_handler(dev,
 							    SYS_OFF_MODE_RESTART, SYS_OFF_PRIO_HIGH,
 							    &rk808_restart, rk808);
 			if (ret)
-				dev_warn(&client->dev, "failed to register rst handler, %d\n", ret);
+				dev_warn(dev, "failed to register rst handler, %d\n", ret);
 			break;
 		default:
-			dev_dbg(&client->dev, "pmic controlled board reset not supported\n");
+			dev_dbg(dev, "pmic controlled board reset not supported\n");
 			break;
 		}
 	}
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(rk8xx_probe);
 
-static int __maybe_unused rk8xx_suspend(struct device *dev)
+int rk8xx_suspend(struct device *dev)
 {
-	struct rk808 *rk808 = i2c_get_clientdata(to_i2c_client(dev));
+	struct rk808 *rk808 = dev_get_drvdata(dev);
 	int ret = 0;
 
 	switch (rk808->variant) {
@@ -804,10 +676,11 @@ static int __maybe_unused rk8xx_suspend(struct device *dev)
 
 	return ret;
 }
+EXPORT_SYMBOL_GPL(rk8xx_suspend);
 
-static int __maybe_unused rk8xx_resume(struct device *dev)
+int rk8xx_resume(struct device *dev)
 {
-	struct rk808 *rk808 = i2c_get_clientdata(to_i2c_client(dev));
+	struct rk808 *rk808 = dev_get_drvdata(dev);
 	int ret = 0;
 
 	switch (rk808->variant) {
@@ -824,22 +697,10 @@ static int __maybe_unused rk8xx_resume(struct device *dev)
 
 	return ret;
 }
-static SIMPLE_DEV_PM_OPS(rk8xx_pm_ops, rk8xx_suspend, rk8xx_resume);
-
-static struct i2c_driver rk808_i2c_driver = {
-	.driver = {
-		.name = "rk808",
-		.of_match_table = rk808_of_match,
-		.pm = &rk8xx_pm_ops,
-	},
-	.probe_new = rk808_probe,
-	.shutdown = rk8xx_shutdown,
-};
-
-module_i2c_driver(rk808_i2c_driver);
+EXPORT_SYMBOL_GPL(rk8xx_resume);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
 MODULE_AUTHOR("Zhang Qing <zhangqing@rock-chips.com>");
 MODULE_AUTHOR("Wadim Egorov <w.egorov@phytec.de>");
-MODULE_DESCRIPTION("RK808/RK818 PMIC driver");
+MODULE_DESCRIPTION("RK8xx PMIC core");
diff --git a/drivers/mfd/rk8xx-i2c.c b/drivers/mfd/rk8xx-i2c.c
new file mode 100644
index 000000000000..6d121b589fec
--- /dev/null
+++ b/drivers/mfd/rk8xx-i2c.c
@@ -0,0 +1,200 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Rockchip RK808/RK818 Core (I2C) driver
+ *
+ * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (C) 2016 PHYTEC Messtechnik GmbH
+ *
+ * Author: Chris Zhong <zyw@rock-chips.com>
+ * Author: Zhang Qing <zhangqing@rock-chips.com>
+ * Author: Wadim Egorov <w.egorov@phytec.de>
+ */
+
+#include <linux/i2c.h>
+#include <linux/mfd/rk808.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+
+static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+	/*
+	 * Notes:
+	 * - Technically the ROUND_30s bit makes RTC_CTRL_REG volatile, but
+	 *   we don't use that feature.  It's better to cache.
+	 * - It's unlikely we care that RK808_DEVCTRL_REG is volatile since
+	 *   bits are cleared in case when we shutoff anyway, but better safe.
+	 */
+
+	switch (reg) {
+	case RK808_SECONDS_REG ... RK808_WEEKS_REG:
+	case RK808_RTC_STATUS_REG:
+	case RK808_VB_MON_REG:
+	case RK808_THERMAL_REG:
+	case RK808_DCDC_UV_STS_REG:
+	case RK808_LDO_UV_STS_REG:
+	case RK808_DCDC_PG_REG:
+	case RK808_LDO_PG_REG:
+	case RK808_DEVCTRL_REG:
+	case RK808_INT_STS_REG1:
+	case RK808_INT_STS_REG2:
+		return true;
+	}
+
+	return false;
+}
+
+static bool rk817_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+	/*
+	 * Notes:
+	 * - Technically the ROUND_30s bit makes RTC_CTRL_REG volatile, but
+	 *   we don't use that feature.  It's better to cache.
+	 */
+
+	switch (reg) {
+	case RK817_SECONDS_REG ... RK817_WEEKS_REG:
+	case RK817_RTC_STATUS_REG:
+	case RK817_CODEC_DTOP_LPT_SRST:
+	case RK817_GAS_GAUGE_ADC_CONFIG0 ... RK817_GAS_GAUGE_CUR_ADC_K0:
+	case RK817_PMIC_CHRG_STS:
+	case RK817_PMIC_CHRG_OUT:
+	case RK817_PMIC_CHRG_IN:
+	case RK817_INT_STS_REG0:
+	case RK817_INT_STS_REG1:
+	case RK817_INT_STS_REG2:
+	case RK817_SYS_STS:
+		return true;
+	}
+
+	return false;
+}
+
+
+static const struct regmap_config rk818_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = RK818_USB_CTRL_REG,
+	.cache_type = REGCACHE_RBTREE,
+	.volatile_reg = rk808_is_volatile_reg,
+};
+
+static const struct regmap_config rk805_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = RK805_OFF_SOURCE_REG,
+	.cache_type = REGCACHE_RBTREE,
+	.volatile_reg = rk808_is_volatile_reg,
+};
+
+static const struct regmap_config rk808_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = RK808_IO_POL_REG,
+	.cache_type = REGCACHE_RBTREE,
+	.volatile_reg = rk808_is_volatile_reg,
+};
+
+static const struct regmap_config rk817_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = RK817_GPIO_INT_CFG,
+	.cache_type = REGCACHE_NONE,
+	.volatile_reg = rk817_is_volatile_reg,
+};
+
+static int rk8xx_i2c_get_variant(struct i2c_client *client)
+{
+	u8 pmic_id_msb, pmic_id_lsb;
+	int msb, lsb;
+
+	if (of_device_is_compatible(client->dev.of_node, "rockchip,rk817") ||
+	    of_device_is_compatible(client->dev.of_node, "rockchip,rk809")) {
+		pmic_id_msb = RK817_ID_MSB;
+		pmic_id_lsb = RK817_ID_LSB;
+	} else {
+		pmic_id_msb = RK808_ID_MSB;
+		pmic_id_lsb = RK808_ID_LSB;
+	}
+
+	/* Read chip variant */
+	msb = i2c_smbus_read_byte_data(client, pmic_id_msb);
+	if (msb < 0)
+		return dev_err_probe(&client->dev, msb, "failed to read the chip id MSB\n");
+
+	lsb = i2c_smbus_read_byte_data(client, pmic_id_lsb);
+	if (lsb < 0)
+		return dev_err_probe(&client->dev, lsb, "failed to read the chip id LSB\n");
+
+	return ((msb << 8) | lsb) & RK8XX_ID_MSK;
+}
+
+static int rk8xx_i2c_probe(struct i2c_client *client)
+{
+	const struct regmap_config *regmap_cfg;
+	struct regmap *regmap;
+	int variant;
+
+	variant = rk8xx_i2c_get_variant(client);
+	if (variant < 0)
+		return variant;
+
+	switch (variant) {
+	case RK805_ID:
+		regmap_cfg = &rk805_regmap_config;
+		break;
+	case RK808_ID:
+		regmap_cfg = &rk808_regmap_config;
+		break;
+	case RK818_ID:
+		regmap_cfg = &rk818_regmap_config;
+		break;
+	case RK809_ID:
+	case RK817_ID:
+		regmap_cfg = &rk817_regmap_config;
+		break;
+	default:
+		return dev_err_probe(&client->dev, -EINVAL, "Unsupported RK8XX ID %x\n", variant);
+	}
+
+	regmap = devm_regmap_init_i2c(client, regmap_cfg);
+	if (IS_ERR(regmap))
+		return dev_err_probe(&client->dev, PTR_ERR(regmap),
+				     "regmap initialization failed\n");
+
+	return rk8xx_probe(&client->dev, variant, client->irq, regmap);
+}
+
+static void rk8xx_i2c_shutdown(struct i2c_client *client)
+{
+	rk8xx_shutdown(&client->dev);
+}
+
+static SIMPLE_DEV_PM_OPS(rk8xx_i2c_pm_ops, rk8xx_suspend, rk8xx_resume);
+
+static const struct of_device_id rk8xx_i2c_of_match[] = {
+	{ .compatible = "rockchip,rk805" },
+	{ .compatible = "rockchip,rk808" },
+	{ .compatible = "rockchip,rk809" },
+	{ .compatible = "rockchip,rk817" },
+	{ .compatible = "rockchip,rk818" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, rk8xx_i2c_of_match);
+
+static struct i2c_driver rk8xx_i2c_driver = {
+	.driver = {
+		.name = "rk8xx-i2c",
+		.of_match_table = rk8xx_i2c_of_match,
+		.pm = &rk8xx_i2c_pm_ops,
+	},
+	.probe_new = rk8xx_i2c_probe,
+	.shutdown  = rk8xx_i2c_shutdown,
+};
+module_i2c_driver(rk8xx_i2c_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
+MODULE_AUTHOR("Zhang Qing <zhangqing@rock-chips.com>");
+MODULE_AUTHOR("Wadim Egorov <w.egorov@phytec.de>");
+MODULE_DESCRIPTION("RK8xx I2C PMIC driver");
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 5787c579dcf6..77ff9a641aeb 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -407,7 +407,7 @@ config PINCTRL_PISTACHIO
 
 config PINCTRL_RK805
 	tristate "Pinctrl and GPIO driver for RK805 PMIC"
-	depends on MFD_RK808
+	depends on MFD_RK8XX
 	select GPIOLIB
 	select PINMUX
 	select GENERIC_PINCONF
diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
index c78be9f322e6..4a5e8e1d1237 100644
--- a/drivers/power/supply/Kconfig
+++ b/drivers/power/supply/Kconfig
@@ -706,7 +706,7 @@ config CHARGER_BQ256XX
 
 config CHARGER_RK817
 	tristate "Rockchip RK817 PMIC Battery Charger"
-	depends on MFD_RK808
+	depends on MFD_RK8XX
 	help
 	  Say Y to include support for Rockchip RK817 Battery Charger.
 
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index e5f3613c15fa..f2881fe3e0a7 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -1056,7 +1056,7 @@ config REGULATOR_RC5T583
 
 config REGULATOR_RK808
 	tristate "Rockchip RK805/RK808/RK809/RK817/RK818 Power regulators"
-	depends on MFD_RK808
+	depends on MFD_RK8XX
 	help
 	  Select this option to enable the power regulator of ROCKCHIP
 	  PMIC RK805,RK809&RK817,RK808 and RK818.
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 753872408615..ffca9a8bb878 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -395,7 +395,7 @@ config RTC_DRV_NCT3018Y
 
 config RTC_DRV_RK808
 	tristate "Rockchip RK805/RK808/RK809/RK817/RK818 RTC"
-	depends on MFD_RK808
+	depends on MFD_RK8XX
 	help
 	  If you say yes here you will get support for the
 	  RTC of RK805, RK809 and RK817, RK808 and RK818 PMIC.
diff --git a/include/linux/mfd/rk808.h b/include/linux/mfd/rk808.h
index a89ddd9ba68e..4183427a80fe 100644
--- a/include/linux/mfd/rk808.h
+++ b/include/linux/mfd/rk808.h
@@ -794,4 +794,10 @@ struct rk808 {
 	const struct regmap_config	*regmap_cfg;
 	const struct regmap_irq_chip	*regmap_irq_chip;
 };
+
+void rk8xx_shutdown(struct device *dev);
+int rk8xx_probe(struct device *dev, int variant, unsigned int irq, struct regmap *regmap);
+int rk8xx_suspend(struct device *dev);
+int rk8xx_resume(struct device *dev);
+
 #endif /* __LINUX_REGULATOR_RK808_H */
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index 79d2362ad055..069a222c7cef 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -1313,7 +1313,7 @@ config SND_SOC_RK3328
 
 config SND_SOC_RK817
 	tristate "Rockchip RK817 audio CODEC"
-	depends on MFD_RK808 || COMPILE_TEST
+	depends on MFD_RK8XX || COMPILE_TEST
 
 config SND_SOC_RL6231
 	tristate
-- 
2.39.2


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v8 06/14] mfd: rk8xx-i2c: use device_get_match_data
  2023-05-04 17:36 [PATCH v8 00/14] mfd/pinctrl/regulator: Add RK806 Support Sebastian Reichel
                   ` (4 preceding siblings ...)
  2023-05-04 17:36 ` [PATCH v8 05/14] mfd: rk808: split into core and i2c Sebastian Reichel
@ 2023-05-04 17:36 ` Sebastian Reichel
  2023-05-15 15:19   ` Lee Jones
  2023-05-04 17:36 ` [PATCH v8 07/14] dt-bindings: mfd: add rk806 binding Sebastian Reichel
                   ` (9 subsequent siblings)
  15 siblings, 1 reply; 35+ messages in thread
From: Sebastian Reichel @ 2023-05-04 17:36 UTC (permalink / raw)
  To: Heiko Stuebner, Rob Herring, Krzysztof Kozlowski, Lee Jones
  Cc: Michael Turquette, Stephen Boyd, Linus Walleij, Mark Brown,
	Liam Girdwood, Alexandre Belloni, Alessandro Zummo,
	linux-rockchip, devicetree, linux-kernel, Sebastian Reichel,
	kernel, Diederik de Haas, Vincent Legoll

Simplify the device identification logic by supplying the relevant
information via of_match_data. This also removes the dev_info()
printing the chip version, since that's supplied by the match data
now.

Due to lack of hardware this change is compile-tested only.

Acked-for-MFD-by: Lee Jones <lee@kernel.org>
Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, Quartz64 Model A + B
Tested-by: Vincent Legoll <vincent.legoll@gmail.com> # Pine64 QuartzPro64
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/mfd/rk8xx-core.c |  2 -
 drivers/mfd/rk8xx-i2c.c  | 89 +++++++++++++++++-----------------------
 2 files changed, 37 insertions(+), 54 deletions(-)

diff --git a/drivers/mfd/rk8xx-core.c b/drivers/mfd/rk8xx-core.c
index 5c0a5acef34c..ddf2052c5190 100644
--- a/drivers/mfd/rk8xx-core.c
+++ b/drivers/mfd/rk8xx-core.c
@@ -597,8 +597,6 @@ int rk8xx_probe(struct device *dev, int variant, unsigned int irq, struct regmap
 		return -EINVAL;
 	}
 
-	dev_info(dev, "chip id: 0x%x\n", (unsigned int)rk808->variant);
-
 	if (!irq)
 		return dev_err_probe(dev, -EINVAL, "No interrupt support, no core IRQ\n");
 
diff --git a/drivers/mfd/rk8xx-i2c.c b/drivers/mfd/rk8xx-i2c.c
index 6d121b589fec..2822bfa8a04a 100644
--- a/drivers/mfd/rk8xx-i2c.c
+++ b/drivers/mfd/rk8xx-i2c.c
@@ -16,6 +16,11 @@
 #include <linux/of.h>
 #include <linux/regmap.h>
 
+struct rk8xx_i2c_platform_data {
+	const struct regmap_config *regmap_cfg;
+	int variant;
+};
+
 static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
 {
 	/*
@@ -103,66 +108,46 @@ static const struct regmap_config rk817_regmap_config = {
 	.volatile_reg = rk817_is_volatile_reg,
 };
 
-static int rk8xx_i2c_get_variant(struct i2c_client *client)
-{
-	u8 pmic_id_msb, pmic_id_lsb;
-	int msb, lsb;
-
-	if (of_device_is_compatible(client->dev.of_node, "rockchip,rk817") ||
-	    of_device_is_compatible(client->dev.of_node, "rockchip,rk809")) {
-		pmic_id_msb = RK817_ID_MSB;
-		pmic_id_lsb = RK817_ID_LSB;
-	} else {
-		pmic_id_msb = RK808_ID_MSB;
-		pmic_id_lsb = RK808_ID_LSB;
-	}
+static const struct rk8xx_i2c_platform_data rk805_data = {
+	.regmap_cfg = &rk805_regmap_config,
+	.variant = RK805_ID,
+};
+
+static const struct rk8xx_i2c_platform_data rk808_data = {
+	.regmap_cfg = &rk808_regmap_config,
+	.variant = RK808_ID,
+};
 
-	/* Read chip variant */
-	msb = i2c_smbus_read_byte_data(client, pmic_id_msb);
-	if (msb < 0)
-		return dev_err_probe(&client->dev, msb, "failed to read the chip id MSB\n");
+static const struct rk8xx_i2c_platform_data rk809_data = {
+	.regmap_cfg = &rk817_regmap_config,
+	.variant = RK809_ID,
+};
 
-	lsb = i2c_smbus_read_byte_data(client, pmic_id_lsb);
-	if (lsb < 0)
-		return dev_err_probe(&client->dev, lsb, "failed to read the chip id LSB\n");
+static const struct rk8xx_i2c_platform_data rk817_data = {
+	.regmap_cfg = &rk817_regmap_config,
+	.variant = RK817_ID,
+};
 
-	return ((msb << 8) | lsb) & RK8XX_ID_MSK;
-}
+static const struct rk8xx_i2c_platform_data rk818_data = {
+	.regmap_cfg = &rk818_regmap_config,
+	.variant = RK818_ID,
+};
 
 static int rk8xx_i2c_probe(struct i2c_client *client)
 {
-	const struct regmap_config *regmap_cfg;
+	const struct rk8xx_i2c_platform_data *data;
 	struct regmap *regmap;
-	int variant;
 
-	variant = rk8xx_i2c_get_variant(client);
-	if (variant < 0)
-		return variant;
-
-	switch (variant) {
-	case RK805_ID:
-		regmap_cfg = &rk805_regmap_config;
-		break;
-	case RK808_ID:
-		regmap_cfg = &rk808_regmap_config;
-		break;
-	case RK818_ID:
-		regmap_cfg = &rk818_regmap_config;
-		break;
-	case RK809_ID:
-	case RK817_ID:
-		regmap_cfg = &rk817_regmap_config;
-		break;
-	default:
-		return dev_err_probe(&client->dev, -EINVAL, "Unsupported RK8XX ID %x\n", variant);
-	}
+	data = device_get_match_data(&client->dev);
+	if (!data)
+		return -ENODEV;
 
-	regmap = devm_regmap_init_i2c(client, regmap_cfg);
+	regmap = devm_regmap_init_i2c(client, data->regmap_cfg);
 	if (IS_ERR(regmap))
 		return dev_err_probe(&client->dev, PTR_ERR(regmap),
 				     "regmap initialization failed\n");
 
-	return rk8xx_probe(&client->dev, variant, client->irq, regmap);
+	return rk8xx_probe(&client->dev, data->variant, client->irq, regmap);
 }
 
 static void rk8xx_i2c_shutdown(struct i2c_client *client)
@@ -173,11 +158,11 @@ static void rk8xx_i2c_shutdown(struct i2c_client *client)
 static SIMPLE_DEV_PM_OPS(rk8xx_i2c_pm_ops, rk8xx_suspend, rk8xx_resume);
 
 static const struct of_device_id rk8xx_i2c_of_match[] = {
-	{ .compatible = "rockchip,rk805" },
-	{ .compatible = "rockchip,rk808" },
-	{ .compatible = "rockchip,rk809" },
-	{ .compatible = "rockchip,rk817" },
-	{ .compatible = "rockchip,rk818" },
+	{ .compatible = "rockchip,rk805", .data = &rk805_data },
+	{ .compatible = "rockchip,rk808", .data = &rk808_data },
+	{ .compatible = "rockchip,rk809", .data = &rk809_data },
+	{ .compatible = "rockchip,rk817", .data = &rk817_data },
+	{ .compatible = "rockchip,rk818", .data = &rk818_data },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, rk8xx_i2c_of_match);
-- 
2.39.2


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v8 07/14] dt-bindings: mfd: add rk806 binding
  2023-05-04 17:36 [PATCH v8 00/14] mfd/pinctrl/regulator: Add RK806 Support Sebastian Reichel
                   ` (5 preceding siblings ...)
  2023-05-04 17:36 ` [PATCH v8 06/14] mfd: rk8xx-i2c: use device_get_match_data Sebastian Reichel
@ 2023-05-04 17:36 ` Sebastian Reichel
  2023-05-15 15:20   ` Lee Jones
  2023-05-04 17:36 ` [PATCH v8 08/14] mfd: rk8xx: add rk806 support Sebastian Reichel
                   ` (8 subsequent siblings)
  15 siblings, 1 reply; 35+ messages in thread
From: Sebastian Reichel @ 2023-05-04 17:36 UTC (permalink / raw)
  To: Heiko Stuebner, Rob Herring, Krzysztof Kozlowski, Lee Jones
  Cc: Michael Turquette, Stephen Boyd, Linus Walleij, Mark Brown,
	Liam Girdwood, Alexandre Belloni, Alessandro Zummo,
	linux-rockchip, devicetree, linux-kernel, Sebastian Reichel,
	kernel, Rob Herring

Add DT binding document for Rockchip's RK806 PMIC.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 .../bindings/mfd/rockchip,rk806.yaml          | 406 ++++++++++++++++++
 1 file changed, 406 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/rockchip,rk806.yaml

diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk806.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk806.yaml
new file mode 100644
index 000000000000..cf2500f2e9a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/rockchip,rk806.yaml
@@ -0,0 +1,406 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/rockchip,rk806.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RK806 Power Management Integrated Circuit
+
+maintainers:
+  - Sebastian Reichel <sebastian.reichel@collabora.com>
+
+description:
+  Rockchip RK806 series PMIC. This device consists of an spi or
+  i2c controlled MFD that includes multiple switchable regulators.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk806
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  vcc1-supply:
+    description:
+      The input supply for dcdc-reg1.
+
+  vcc2-supply:
+    description:
+      The input supply for dcdc-reg2.
+
+  vcc3-supply:
+    description:
+      The input supply for dcdc-reg3.
+
+  vcc4-supply:
+    description:
+      The input supply for dcdc-reg4.
+
+  vcc5-supply:
+    description:
+      The input supply for dcdc-reg5.
+
+  vcc6-supply:
+    description:
+      The input supply for dcdc-reg6.
+
+  vcc7-supply:
+    description:
+      The input supply for dcdc-reg7.
+
+  vcc8-supply:
+    description:
+      The input supply for dcdc-reg8.
+
+  vcc9-supply:
+    description:
+      The input supply for dcdc-reg9.
+
+  vcc10-supply:
+    description:
+      The input supply for dcdc-reg10.
+
+  vcc11-supply:
+    description:
+      The input supply for pldo-reg1, pldo-reg2 and pldo-reg3.
+
+  vcc12-supply:
+    description:
+      The input supply for pldo-reg4 and pldo-reg5.
+
+  vcc13-supply:
+    description:
+      The input supply for nldo-reg1, nldo-reg2 and nldo-reg3.
+
+  vcc14-supply:
+    description:
+      The input supply for nldo-reg4 and nldo-reg5.
+
+  vcca-supply:
+    description:
+      The input supply for pldo-reg6.
+
+  regulators:
+    type: object
+    additionalProperties: false
+    patternProperties:
+      "^(dcdc-reg([1-9]|10)|pldo-reg[1-6]|nldo-reg[1-5])$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+patternProperties:
+  '-pins$':
+    type: object
+    additionalProperties: false
+    $ref: /schemas/pinctrl/pinmux-node.yaml
+
+    properties:
+      function:
+        enum: [pin_fun0, pin_fun1, pin_fun2, pin_fun3, pin_fun4, pin_fun5]
+
+      pins:
+        $ref: /schemas/types.yaml#/definitions/string
+        enum: [gpio_pwrctrl1, gpio_pwrctrl2, gpio_pwrctrl3]
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/rockchip.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@0 {
+            compatible = "rockchip,rk806";
+            reg = <0x0>;
+
+            interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+
+            vcc1-supply = <&vcc5v0_sys>;
+            vcc2-supply = <&vcc5v0_sys>;
+            vcc3-supply = <&vcc5v0_sys>;
+            vcc4-supply = <&vcc5v0_sys>;
+            vcc5-supply = <&vcc5v0_sys>;
+            vcc6-supply = <&vcc5v0_sys>;
+            vcc7-supply = <&vcc5v0_sys>;
+            vcc8-supply = <&vcc5v0_sys>;
+            vcc9-supply = <&vcc5v0_sys>;
+            vcc10-supply = <&vcc5v0_sys>;
+            vcc11-supply = <&vcc_2v0_pldo_s3>;
+            vcc12-supply = <&vcc5v0_sys>;
+            vcc13-supply = <&vcc5v0_sys>;
+            vcc14-supply = <&vcc_1v1_nldo_s3>;
+            vcca-supply = <&vcc5v0_sys>;
+
+            regulators {
+                vdd_gpu_s0: dcdc-reg1 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <550000>;
+                    regulator-max-microvolt = <950000>;
+                    regulator-ramp-delay = <12500>;
+                    regulator-name = "vdd_gpu_s0";
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                vdd_npu_s0: dcdc-reg2 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <550000>;
+                    regulator-max-microvolt = <950000>;
+                    regulator-ramp-delay = <12500>;
+                    regulator-name = "vdd_npu_s0";
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                vdd_log_s0: dcdc-reg3 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <750000>;
+                    regulator-max-microvolt = <750000>;
+                    regulator-ramp-delay = <12500>;
+                    regulator-name = "vdd_log_s0";
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <750000>;
+                    };
+                };
+
+                vdd_vdenc_s0: dcdc-reg4 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <550000>;
+                    regulator-max-microvolt = <950000>;
+                    regulator-ramp-delay = <12500>;
+                    regulator-name = "vdd_vdenc_s0";
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                vdd_gpu_mem_s0: dcdc-reg5 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <675000>;
+                    regulator-max-microvolt = <950000>;
+                    regulator-ramp-delay = <12500>;
+                    regulator-name = "vdd_gpu_mem_s0";
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                vdd_npu_mem_s0: dcdc-reg6 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <675000>;
+                    regulator-max-microvolt = <950000>;
+                    regulator-ramp-delay = <12500>;
+                    regulator-name = "vdd_npu_mem_s0";
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                vcc_2v0_pldo_s3: dcdc-reg7 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <2000000>;
+                    regulator-max-microvolt = <2000000>;
+                    regulator-ramp-delay = <12500>;
+                    regulator-name = "vdd_2v0_pldo_s3";
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <2000000>;
+                    };
+                };
+
+                vdd_vdenc_mem_s0: dcdc-reg8 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <675000>;
+                    regulator-max-microvolt = <950000>;
+                    regulator-ramp-delay = <12500>;
+                    regulator-name = "vdd_vdenc_mem_s0";
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                vdd2_ddr_s3: dcdc-reg9 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-name = "vdd2_ddr_s3";
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                    };
+                };
+
+                vcc_1v1_nldo_s3: dcdc-reg10 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1100000>;
+                    regulator-max-microvolt = <1100000>;
+                    regulator-ramp-delay = <12500>;
+                    regulator-name = "vcc_1v1_nldo_s3";
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1100000>;
+                    };
+                };
+
+                avcc_1v8_s0: pldo-reg1 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-ramp-delay = <12500>;
+                    regulator-name = "avcc_1v8_s0";
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                vdd1_1v8_ddr_s3: pldo-reg2 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-ramp-delay = <12500>;
+                    regulator-name = "vdd1_1v8_ddr_s3";
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1800000>;
+                    };
+                };
+
+                vcc_1v8_s3: pldo-reg3 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-ramp-delay = <12500>;
+                    regulator-name = "vcc_1v8_s3";
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1800000>;
+                    };
+                };
+
+                vcc_3v3_s0: pldo-reg4 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-ramp-delay = <12500>;
+                    regulator-name = "vcc_3v3_s0";
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                vccio_sd_s0: pldo-reg5 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-ramp-delay = <12500>;
+                    regulator-name = "vccio_sd_s0";
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                master_pldo6_s3: pldo-reg6 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-name = "master_pldo6_s3";
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1800000>;
+                    };
+                };
+
+                vdd_0v75_s3: nldo-reg1 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <750000>;
+                    regulator-max-microvolt = <750000>;
+                    regulator-ramp-delay = <12500>;
+                    regulator-name = "vdd_0v75_s3";
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <750000>;
+                    };
+                };
+
+                vdd2l_0v9_ddr_s3: nldo-reg2 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <900000>;
+                    regulator-max-microvolt = <900000>;
+                    regulator-name = "vdd2l_0v9_ddr_s3";
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <900000>;
+                    };
+                };
+
+                master_nldo3: nldo-reg3 {
+                    regulator-name = "master_nldo3";
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                avdd_0v75_s0: nldo-reg4 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <750000>;
+                    regulator-max-microvolt = <750000>;
+                    regulator-name = "avdd_0v75_s0";
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                vdd_0v85_s0: nldo-reg5 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <850000>;
+                    regulator-max-microvolt = <850000>;
+                    regulator-name = "vdd_0v85_s0";
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+            };
+        };
+    };
-- 
2.39.2


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v8 08/14] mfd: rk8xx: add rk806 support
  2023-05-04 17:36 [PATCH v8 00/14] mfd/pinctrl/regulator: Add RK806 Support Sebastian Reichel
                   ` (6 preceding siblings ...)
  2023-05-04 17:36 ` [PATCH v8 07/14] dt-bindings: mfd: add rk806 binding Sebastian Reichel
@ 2023-05-04 17:36 ` Sebastian Reichel
  2023-05-15 15:20   ` Lee Jones
  2023-11-15 17:17   ` Neil Armstrong
  2023-05-04 17:36 ` [PATCH v8 09/14] pinctrl: rk805: add rk806 pinctrl support Sebastian Reichel
                   ` (7 subsequent siblings)
  15 siblings, 2 replies; 35+ messages in thread
From: Sebastian Reichel @ 2023-05-04 17:36 UTC (permalink / raw)
  To: Heiko Stuebner, Rob Herring, Krzysztof Kozlowski, Lee Jones
  Cc: Michael Turquette, Stephen Boyd, Linus Walleij, Mark Brown,
	Liam Girdwood, Alexandre Belloni, Alessandro Zummo,
	linux-rockchip, devicetree, linux-kernel, Sebastian Reichel,
	kernel, Diederik de Haas, Vincent Legoll

Add support for SPI connected rk806, which is used by the RK3588
evaluation boards. The PMIC is advertised to support I2C and SPI,
but the evaluation boards all use SPI. Thus only SPI support is
added here.

Acked-for-MFD-by: Lee Jones <lee@kernel.org>
Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, Quartz64 Model A + B
Tested-by: Vincent Legoll <vincent.legoll@gmail.com> # Pine64 QuartzPro64
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/mfd/Kconfig       |  14 ++
 drivers/mfd/Makefile      |   1 +
 drivers/mfd/rk8xx-core.c  |  69 ++++++-
 drivers/mfd/rk8xx-spi.c   | 124 ++++++++++++
 include/linux/mfd/rk808.h | 409 ++++++++++++++++++++++++++++++++++++++
 5 files changed, 614 insertions(+), 3 deletions(-)
 create mode 100644 drivers/mfd/rk8xx-spi.c

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index de53e6c701fd..d4879cb4e1f6 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1201,6 +1201,20 @@ config MFD_RK8XX_I2C
 	  through I2C interface. The device supports multiple sub-devices
 	  including interrupts, RTC, LDO & DCDC regulators, and onkey.
 
+config MFD_RK8XX_SPI
+	tristate "Rockchip RK806 Power Management Chip"
+	depends on SPI && OF
+	select MFD_CORE
+	select REGMAP_SPI
+	select REGMAP_IRQ
+	select MFD_RK8XX
+	help
+	  If you say yes here you get support for the RK806 Power Management
+	  chip.
+	  This driver provides common support for accessing the device
+	  through an SPI interface. The device supports multiple sub-devices
+	  including interrupts, LDO & DCDC regulators, and power on-key.
+
 config MFD_RN5T618
 	tristate "Ricoh RN5T567/618 PMIC"
 	depends on I2C
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index ba373193e999..4e666ef5b7fc 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -216,6 +216,7 @@ obj-$(CONFIG_MFD_NTXEC)		+= ntxec.o
 obj-$(CONFIG_MFD_RC5T583)	+= rc5t583.o rc5t583-irq.o
 obj-$(CONFIG_MFD_RK8XX)		+= rk8xx-core.o
 obj-$(CONFIG_MFD_RK8XX_I2C)	+= rk8xx-i2c.o
+obj-$(CONFIG_MFD_RK8XX_SPI)	+= rk8xx-spi.o
 obj-$(CONFIG_MFD_RN5T618)	+= rn5t618.o
 obj-$(CONFIG_MFD_SEC_CORE)	+= sec-core.o sec-irq.o
 obj-$(CONFIG_MFD_SYSCON)	+= syscon.o
diff --git a/drivers/mfd/rk8xx-core.c b/drivers/mfd/rk8xx-core.c
index ddf2052c5190..e8fc9e2ab1d0 100644
--- a/drivers/mfd/rk8xx-core.c
+++ b/drivers/mfd/rk8xx-core.c
@@ -37,6 +37,11 @@ static const struct resource rk805_key_resources[] = {
 	DEFINE_RES_IRQ(RK805_IRQ_PWRON_FALL),
 };
 
+static struct resource rk806_pwrkey_resources[] = {
+	DEFINE_RES_IRQ(RK806_IRQ_PWRON_FALL),
+	DEFINE_RES_IRQ(RK806_IRQ_PWRON_RISE),
+};
+
 static const struct resource rk817_pwrkey_resources[] = {
 	DEFINE_RES_IRQ(RK817_IRQ_PWRON_RISE),
 	DEFINE_RES_IRQ(RK817_IRQ_PWRON_FALL),
@@ -64,6 +69,17 @@ static const struct mfd_cell rk805s[] = {
 	},
 };
 
+static const struct mfd_cell rk806s[] = {
+	{ .name = "rk805-pinctrl", .id = PLATFORM_DEVID_AUTO, },
+	{ .name = "rk808-regulator", .id = PLATFORM_DEVID_AUTO, },
+	{
+		.name = "rk805-pwrkey",
+		.resources = rk806_pwrkey_resources,
+		.num_resources = ARRAY_SIZE(rk806_pwrkey_resources),
+		.id = PLATFORM_DEVID_AUTO,
+	},
+};
+
 static const struct mfd_cell rk808s[] = {
 	{ .name = "rk808-clkout", .id = PLATFORM_DEVID_NONE, },
 	{ .name = "rk808-regulator", .id = PLATFORM_DEVID_NONE, },
@@ -123,6 +139,12 @@ static const struct rk808_reg_data rk805_pre_init_reg[] = {
 	{RK805_THERMAL_REG, TEMP_HOTDIE_MSK, TEMP115C},
 };
 
+static const struct rk808_reg_data rk806_pre_init_reg[] = {
+	{ RK806_GPIO_INT_CONFIG, RK806_INT_POL_MSK, RK806_INT_POL_L },
+	{ RK806_SYS_CFG3, RK806_SLAVE_RESTART_FUN_MSK, RK806_SLAVE_RESTART_FUN_EN },
+	{ RK806_SYS_OPTION, RK806_SYS_ENB2_2M_MSK, RK806_SYS_ENB2_2M_EN },
+};
+
 static const struct rk808_reg_data rk808_pre_init_reg[] = {
 	{ RK808_BUCK3_CONFIG_REG, BUCK_ILMIN_MASK,  BUCK_ILMIN_150MA },
 	{ RK808_BUCK4_CONFIG_REG, BUCK_ILMIN_MASK,  BUCK_ILMIN_200MA },
@@ -273,6 +295,27 @@ static const struct regmap_irq rk805_irqs[] = {
 	},
 };
 
+static const struct regmap_irq rk806_irqs[] = {
+	/* INT_STS0 IRQs */
+	REGMAP_IRQ_REG(RK806_IRQ_PWRON_FALL, 0, RK806_INT_STS_PWRON_FALL),
+	REGMAP_IRQ_REG(RK806_IRQ_PWRON_RISE, 0, RK806_INT_STS_PWRON_RISE),
+	REGMAP_IRQ_REG(RK806_IRQ_PWRON, 0, RK806_INT_STS_PWRON),
+	REGMAP_IRQ_REG(RK806_IRQ_PWRON_LP, 0, RK806_INT_STS_PWRON_LP),
+	REGMAP_IRQ_REG(RK806_IRQ_HOTDIE, 0, RK806_INT_STS_HOTDIE),
+	REGMAP_IRQ_REG(RK806_IRQ_VDC_RISE, 0, RK806_INT_STS_VDC_RISE),
+	REGMAP_IRQ_REG(RK806_IRQ_VDC_FALL, 0, RK806_INT_STS_VDC_FALL),
+	REGMAP_IRQ_REG(RK806_IRQ_VB_LO, 0, RK806_INT_STS_VB_LO),
+	/* INT_STS1 IRQs */
+	REGMAP_IRQ_REG(RK806_IRQ_REV0, 1, RK806_INT_STS_REV0),
+	REGMAP_IRQ_REG(RK806_IRQ_REV1, 1, RK806_INT_STS_REV1),
+	REGMAP_IRQ_REG(RK806_IRQ_REV2, 1, RK806_INT_STS_REV2),
+	REGMAP_IRQ_REG(RK806_IRQ_CRC_ERROR, 1, RK806_INT_STS_CRC_ERROR),
+	REGMAP_IRQ_REG(RK806_IRQ_SLP3_GPIO, 1, RK806_INT_STS_SLP3_GPIO),
+	REGMAP_IRQ_REG(RK806_IRQ_SLP2_GPIO, 1, RK806_INT_STS_SLP2_GPIO),
+	REGMAP_IRQ_REG(RK806_IRQ_SLP1_GPIO, 1, RK806_INT_STS_SLP1_GPIO),
+	REGMAP_IRQ_REG(RK806_IRQ_WDT, 1, RK806_INT_STS_WDT),
+};
+
 static const struct regmap_irq rk808_irqs[] = {
 	/* INT_STS */
 	[RK808_IRQ_VOUT_LO] = {
@@ -423,6 +466,18 @@ static struct regmap_irq_chip rk805_irq_chip = {
 	.init_ack_masked = true,
 };
 
+static struct regmap_irq_chip rk806_irq_chip = {
+	.name = "rk806",
+	.irqs = rk806_irqs,
+	.num_irqs = ARRAY_SIZE(rk806_irqs),
+	.num_regs = 2,
+	.irq_reg_stride = 2,
+	.mask_base = RK806_INT_MSK0,
+	.status_base = RK806_INT_STS0,
+	.ack_base = RK806_INT_STS0,
+	.init_ack_masked = true,
+};
+
 static const struct regmap_irq_chip rk808_irq_chip = {
 	.name = "rk808",
 	.irqs = rk808_irqs,
@@ -549,6 +604,7 @@ int rk8xx_probe(struct device *dev, int variant, unsigned int irq, struct regmap
 	struct rk808 *rk808;
 	const struct rk808_reg_data *pre_init_reg;
 	const struct mfd_cell *cells;
+	int dual_support = 0;
 	int nr_pre_init_regs;
 	int nr_cells;
 	int ret;
@@ -570,6 +626,14 @@ int rk8xx_probe(struct device *dev, int variant, unsigned int irq, struct regmap
 		cells = rk805s;
 		nr_cells = ARRAY_SIZE(rk805s);
 		break;
+	case RK806_ID:
+		rk808->regmap_irq_chip = &rk806_irq_chip;
+		pre_init_reg = rk806_pre_init_reg;
+		nr_pre_init_regs = ARRAY_SIZE(rk806_pre_init_reg);
+		cells = rk806s;
+		nr_cells = ARRAY_SIZE(rk806s);
+		dual_support = IRQF_SHARED;
+		break;
 	case RK808_ID:
 		rk808->regmap_irq_chip = &rk808_irq_chip;
 		pre_init_reg = rk808_pre_init_reg;
@@ -601,7 +665,7 @@ int rk8xx_probe(struct device *dev, int variant, unsigned int irq, struct regmap
 		return dev_err_probe(dev, -EINVAL, "No interrupt support, no core IRQ\n");
 
 	ret = devm_regmap_add_irq_chip(dev, rk808->regmap, irq,
-				       IRQF_ONESHOT, -1,
+				       IRQF_ONESHOT | dual_support, -1,
 				       rk808->regmap_irq_chip, &rk808->irq_data);
 	if (ret)
 		return dev_err_probe(dev, ret, "Failed to add irq_chip\n");
@@ -616,8 +680,7 @@ int rk8xx_probe(struct device *dev, int variant, unsigned int irq, struct regmap
 					     pre_init_reg[i].addr);
 	}
 
-	ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE,
-			      cells, nr_cells, NULL, 0,
+	ret = devm_mfd_add_devices(dev, 0, cells, nr_cells, NULL, 0,
 			      regmap_irq_get_domain(rk808->irq_data));
 	if (ret)
 		return dev_err_probe(dev, ret, "failed to add MFD devices\n");
diff --git a/drivers/mfd/rk8xx-spi.c b/drivers/mfd/rk8xx-spi.c
new file mode 100644
index 000000000000..fd137f38c2c4
--- /dev/null
+++ b/drivers/mfd/rk8xx-spi.c
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Rockchip RK806 Core (SPI) driver
+ *
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2023 Collabora Ltd.
+ *
+ * Author: Xu Shengfei <xsf@rock-chips.com>
+ * Author: Sebastian Reichel <sebastian.reichel@collabora.com>
+ */
+
+#include <linux/interrupt.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/rk808.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/spi/spi.h>
+
+#define RK806_ADDR_SIZE 2
+#define RK806_CMD_WITH_SIZE(CMD, VALUE_BYTES) \
+	(RK806_CMD_##CMD | RK806_CMD_CRC_DIS | (VALUE_BYTES - 1))
+
+static const struct regmap_range rk806_volatile_ranges[] = {
+	regmap_reg_range(RK806_POWER_EN0, RK806_POWER_EN5),
+	regmap_reg_range(RK806_DVS_START_CTRL, RK806_INT_MSK1),
+};
+
+static const struct regmap_access_table rk806_volatile_table = {
+	.yes_ranges = rk806_volatile_ranges,
+	.n_yes_ranges = ARRAY_SIZE(rk806_volatile_ranges),
+};
+
+static const struct regmap_config rk806_regmap_config_spi = {
+	.reg_bits = 16,
+	.val_bits = 8,
+	.max_register = RK806_BUCK_RSERVE_REG5,
+	.cache_type = REGCACHE_RBTREE,
+	.volatile_table = &rk806_volatile_table,
+};
+
+static int rk806_spi_bus_write(void *context, const void *vdata, size_t count)
+{
+	struct device *dev = context;
+	struct spi_device *spi = to_spi_device(dev);
+	struct spi_transfer xfer[2] = { 0 };
+	/* data and thus count includes the register address */
+	size_t val_size = count - RK806_ADDR_SIZE;
+	char cmd;
+
+	if (val_size < 1 || val_size > (RK806_CMD_LEN_MSK + 1))
+		return -EINVAL;
+
+	cmd = RK806_CMD_WITH_SIZE(WRITE, val_size);
+
+	xfer[0].tx_buf = &cmd;
+	xfer[0].len = sizeof(cmd);
+	xfer[1].tx_buf = vdata;
+	xfer[1].len = count;
+
+	return spi_sync_transfer(spi, xfer, ARRAY_SIZE(xfer));
+}
+
+static int rk806_spi_bus_read(void *context, const void *vreg, size_t reg_size,
+			      void *val, size_t val_size)
+{
+	struct device *dev = context;
+	struct spi_device *spi = to_spi_device(dev);
+	char txbuf[3] = { 0 };
+
+	if (reg_size != RK806_ADDR_SIZE ||
+	    val_size < 1 || val_size > (RK806_CMD_LEN_MSK + 1))
+		return -EINVAL;
+
+	/* TX buffer contains command byte followed by two address bytes */
+	txbuf[0] = RK806_CMD_WITH_SIZE(READ, val_size);
+	memcpy(txbuf+1, vreg, reg_size);
+
+	return spi_write_then_read(spi, txbuf, sizeof(txbuf), val, val_size);
+}
+
+static const struct regmap_bus rk806_regmap_bus_spi = {
+	.write = rk806_spi_bus_write,
+	.read = rk806_spi_bus_read,
+	.reg_format_endian_default = REGMAP_ENDIAN_LITTLE,
+};
+
+static int rk8xx_spi_probe(struct spi_device *spi)
+{
+	struct regmap *regmap;
+
+	regmap = devm_regmap_init(&spi->dev, &rk806_regmap_bus_spi,
+				  &spi->dev, &rk806_regmap_config_spi);
+	if (IS_ERR(regmap))
+		return dev_err_probe(&spi->dev, PTR_ERR(regmap),
+				     "Failed to init regmap\n");
+
+	return rk8xx_probe(&spi->dev, RK806_ID, spi->irq, regmap);
+}
+
+static const struct of_device_id rk8xx_spi_of_match[] = {
+	{ .compatible = "rockchip,rk806", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, rk8xx_spi_of_match);
+
+static const struct spi_device_id rk8xx_spi_id_table[] = {
+	{ "rk806", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(spi, rk8xx_spi_id_table);
+
+static struct spi_driver rk8xx_spi_driver = {
+	.driver		= {
+		.name	= "rk8xx-spi",
+		.of_match_table = rk8xx_spi_of_match,
+	},
+	.probe		= rk8xx_spi_probe,
+	.id_table	= rk8xx_spi_id_table,
+};
+module_spi_driver(rk8xx_spi_driver);
+
+MODULE_AUTHOR("Xu Shengfei <xsf@rock-chips.com>");
+MODULE_DESCRIPTION("RK8xx SPI PMIC driver");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/mfd/rk808.h b/include/linux/mfd/rk808.h
index 4183427a80fe..78e167a92483 100644
--- a/include/linux/mfd/rk808.h
+++ b/include/linux/mfd/rk808.h
@@ -289,6 +289,414 @@ enum rk805_reg {
 #define RK805_INT_ALARM_EN		(1 << 3)
 #define RK805_INT_TIMER_EN		(1 << 2)
 
+/* RK806 */
+#define RK806_POWER_EN0			0x0
+#define RK806_POWER_EN1			0x1
+#define RK806_POWER_EN2			0x2
+#define RK806_POWER_EN3			0x3
+#define RK806_POWER_EN4			0x4
+#define RK806_POWER_EN5			0x5
+#define RK806_POWER_SLP_EN0		0x6
+#define RK806_POWER_SLP_EN1		0x7
+#define RK806_POWER_SLP_EN2		0x8
+#define RK806_POWER_DISCHRG_EN0		0x9
+#define RK806_POWER_DISCHRG_EN1		0xA
+#define RK806_POWER_DISCHRG_EN2		0xB
+#define RK806_BUCK_FB_CONFIG		0xC
+#define RK806_SLP_LP_CONFIG		0xD
+#define RK806_POWER_FPWM_EN0		0xE
+#define RK806_POWER_FPWM_EN1		0xF
+#define RK806_BUCK1_CONFIG		0x10
+#define RK806_BUCK2_CONFIG		0x11
+#define RK806_BUCK3_CONFIG		0x12
+#define RK806_BUCK4_CONFIG		0x13
+#define RK806_BUCK5_CONFIG		0x14
+#define RK806_BUCK6_CONFIG		0x15
+#define RK806_BUCK7_CONFIG		0x16
+#define RK806_BUCK8_CONFIG		0x17
+#define RK806_BUCK9_CONFIG		0x18
+#define RK806_BUCK10_CONFIG		0x19
+#define RK806_BUCK1_ON_VSEL		0x1A
+#define RK806_BUCK2_ON_VSEL		0x1B
+#define RK806_BUCK3_ON_VSEL		0x1C
+#define RK806_BUCK4_ON_VSEL		0x1D
+#define RK806_BUCK5_ON_VSEL		0x1E
+#define RK806_BUCK6_ON_VSEL		0x1F
+#define RK806_BUCK7_ON_VSEL		0x20
+#define RK806_BUCK8_ON_VSEL		0x21
+#define RK806_BUCK9_ON_VSEL		0x22
+#define RK806_BUCK10_ON_VSEL		0x23
+#define RK806_BUCK1_SLP_VSEL		0x24
+#define RK806_BUCK2_SLP_VSEL		0x25
+#define RK806_BUCK3_SLP_VSEL		0x26
+#define RK806_BUCK4_SLP_VSEL		0x27
+#define RK806_BUCK5_SLP_VSEL		0x28
+#define RK806_BUCK6_SLP_VSEL		0x29
+#define RK806_BUCK7_SLP_VSEL		0x2A
+#define RK806_BUCK8_SLP_VSEL		0x2B
+#define RK806_BUCK9_SLP_VSEL		0x2D
+#define RK806_BUCK10_SLP_VSEL		0x2E
+#define RK806_BUCK_DEBUG1		0x30
+#define RK806_BUCK_DEBUG2		0x31
+#define RK806_BUCK_DEBUG3		0x32
+#define RK806_BUCK_DEBUG4		0x33
+#define RK806_BUCK_DEBUG5		0x34
+#define RK806_BUCK_DEBUG6		0x35
+#define RK806_BUCK_DEBUG7		0x36
+#define RK806_BUCK_DEBUG8		0x37
+#define RK806_BUCK_DEBUG9		0x38
+#define RK806_BUCK_DEBUG10		0x39
+#define RK806_BUCK_DEBUG11		0x3A
+#define RK806_BUCK_DEBUG12		0x3B
+#define RK806_BUCK_DEBUG13		0x3C
+#define RK806_BUCK_DEBUG14		0x3D
+#define RK806_BUCK_DEBUG15		0x3E
+#define RK806_BUCK_DEBUG16		0x3F
+#define RK806_BUCK_DEBUG17		0x40
+#define RK806_BUCK_DEBUG18		0x41
+#define RK806_NLDO_IMAX			0x42
+#define RK806_NLDO1_ON_VSEL		0x43
+#define RK806_NLDO2_ON_VSEL		0x44
+#define RK806_NLDO3_ON_VSEL		0x45
+#define RK806_NLDO4_ON_VSEL		0x46
+#define RK806_NLDO5_ON_VSEL		0x47
+#define RK806_NLDO1_SLP_VSEL		0x48
+#define RK806_NLDO2_SLP_VSEL		0x49
+#define RK806_NLDO3_SLP_VSEL		0x4A
+#define RK806_NLDO4_SLP_VSEL		0x4B
+#define RK806_NLDO5_SLP_VSEL		0x4C
+#define RK806_PLDO_IMAX			0x4D
+#define RK806_PLDO1_ON_VSEL		0x4E
+#define RK806_PLDO2_ON_VSEL		0x4F
+#define RK806_PLDO3_ON_VSEL		0x50
+#define RK806_PLDO4_ON_VSEL		0x51
+#define RK806_PLDO5_ON_VSEL		0x52
+#define RK806_PLDO6_ON_VSEL		0x53
+#define RK806_PLDO1_SLP_VSEL		0x54
+#define RK806_PLDO2_SLP_VSEL		0x55
+#define RK806_PLDO3_SLP_VSEL		0x56
+#define RK806_PLDO4_SLP_VSEL		0x57
+#define RK806_PLDO5_SLP_VSEL		0x58
+#define RK806_PLDO6_SLP_VSEL		0x59
+#define RK806_CHIP_NAME			0x5A
+#define RK806_CHIP_VER			0x5B
+#define RK806_OTP_VER			0x5C
+#define RK806_SYS_STS			0x5D
+#define RK806_SYS_CFG0			0x5E
+#define RK806_SYS_CFG1			0x5F
+#define RK806_SYS_OPTION		0x61
+#define RK806_SLEEP_CONFIG0		0x62
+#define RK806_SLEEP_CONFIG1		0x63
+#define RK806_SLEEP_CTR_SEL0		0x64
+#define RK806_SLEEP_CTR_SEL1		0x65
+#define RK806_SLEEP_CTR_SEL2		0x66
+#define RK806_SLEEP_CTR_SEL3		0x67
+#define RK806_SLEEP_CTR_SEL4		0x68
+#define RK806_SLEEP_CTR_SEL5		0x69
+#define RK806_DVS_CTRL_SEL0		0x6A
+#define RK806_DVS_CTRL_SEL1		0x6B
+#define RK806_DVS_CTRL_SEL2		0x6C
+#define RK806_DVS_CTRL_SEL3		0x6D
+#define RK806_DVS_CTRL_SEL4		0x6E
+#define RK806_DVS_CTRL_SEL5		0x6F
+#define RK806_DVS_START_CTRL		0x70
+#define RK806_SLEEP_GPIO		0x71
+#define RK806_SYS_CFG3			0x72
+#define RK806_ON_SOURCE			0x74
+#define RK806_OFF_SOURCE		0x75
+#define RK806_PWRON_KEY			0x76
+#define RK806_INT_STS0			0x77
+#define RK806_INT_MSK0			0x78
+#define RK806_INT_STS1			0x79
+#define RK806_INT_MSK1			0x7A
+#define RK806_GPIO_INT_CONFIG		0x7B
+#define RK806_DATA_REG0			0x7C
+#define RK806_DATA_REG1			0x7D
+#define RK806_DATA_REG2			0x7E
+#define RK806_DATA_REG3			0x7F
+#define RK806_DATA_REG4			0x80
+#define RK806_DATA_REG5			0x81
+#define RK806_DATA_REG6			0x82
+#define RK806_DATA_REG7			0x83
+#define RK806_DATA_REG8			0x84
+#define RK806_DATA_REG9			0x85
+#define RK806_DATA_REG10		0x86
+#define RK806_DATA_REG11		0x87
+#define RK806_DATA_REG12		0x88
+#define RK806_DATA_REG13		0x89
+#define RK806_DATA_REG14		0x8A
+#define RK806_DATA_REG15		0x8B
+#define RK806_TM_REG			0x8C
+#define RK806_OTP_EN_REG		0x8D
+#define RK806_FUNC_OTP_EN_REG		0x8E
+#define RK806_TEST_REG1			0x8F
+#define RK806_TEST_REG2			0x90
+#define RK806_TEST_REG3			0x91
+#define RK806_TEST_REG4			0x92
+#define RK806_TEST_REG5			0x93
+#define RK806_BUCK_VSEL_OTP_REG0	0x94
+#define RK806_BUCK_VSEL_OTP_REG1	0x95
+#define RK806_BUCK_VSEL_OTP_REG2	0x96
+#define RK806_BUCK_VSEL_OTP_REG3	0x97
+#define RK806_BUCK_VSEL_OTP_REG4	0x98
+#define RK806_BUCK_VSEL_OTP_REG5	0x99
+#define RK806_BUCK_VSEL_OTP_REG6	0x9A
+#define RK806_BUCK_VSEL_OTP_REG7	0x9B
+#define RK806_BUCK_VSEL_OTP_REG8	0x9C
+#define RK806_BUCK_VSEL_OTP_REG9	0x9D
+#define RK806_NLDO1_VSEL_OTP_REG0	0x9E
+#define RK806_NLDO1_VSEL_OTP_REG1	0x9F
+#define RK806_NLDO1_VSEL_OTP_REG2	0xA0
+#define RK806_NLDO1_VSEL_OTP_REG3	0xA1
+#define RK806_NLDO1_VSEL_OTP_REG4	0xA2
+#define RK806_PLDO_VSEL_OTP_REG0	0xA3
+#define RK806_PLDO_VSEL_OTP_REG1	0xA4
+#define RK806_PLDO_VSEL_OTP_REG2	0xA5
+#define RK806_PLDO_VSEL_OTP_REG3	0xA6
+#define RK806_PLDO_VSEL_OTP_REG4	0xA7
+#define RK806_PLDO_VSEL_OTP_REG5	0xA8
+#define RK806_BUCK_EN_OTP_REG1		0xA9
+#define RK806_NLDO_EN_OTP_REG1		0xAA
+#define RK806_PLDO_EN_OTP_REG1		0xAB
+#define RK806_BUCK_FB_RES_OTP_REG1	0xAC
+#define RK806_OTP_RESEV_REG0		0xAD
+#define RK806_OTP_RESEV_REG1		0xAE
+#define RK806_OTP_RESEV_REG2		0xAF
+#define RK806_OTP_RESEV_REG3		0xB0
+#define RK806_OTP_RESEV_REG4		0xB1
+#define RK806_BUCK_SEQ_REG0		0xB2
+#define RK806_BUCK_SEQ_REG1		0xB3
+#define RK806_BUCK_SEQ_REG2		0xB4
+#define RK806_BUCK_SEQ_REG3		0xB5
+#define RK806_BUCK_SEQ_REG4		0xB6
+#define RK806_BUCK_SEQ_REG5		0xB7
+#define RK806_BUCK_SEQ_REG6		0xB8
+#define RK806_BUCK_SEQ_REG7		0xB9
+#define RK806_BUCK_SEQ_REG8		0xBA
+#define RK806_BUCK_SEQ_REG9		0xBB
+#define RK806_BUCK_SEQ_REG10		0xBC
+#define RK806_BUCK_SEQ_REG11		0xBD
+#define RK806_BUCK_SEQ_REG12		0xBE
+#define RK806_BUCK_SEQ_REG13		0xBF
+#define RK806_BUCK_SEQ_REG14		0xC0
+#define RK806_BUCK_SEQ_REG15		0xC1
+#define RK806_BUCK_SEQ_REG16		0xC2
+#define RK806_BUCK_SEQ_REG17		0xC3
+#define RK806_HK_TRIM_REG1		0xC4
+#define RK806_HK_TRIM_REG2		0xC5
+#define RK806_BUCK_REF_TRIM_REG1	0xC6
+#define RK806_BUCK_REF_TRIM_REG2	0xC7
+#define RK806_BUCK_REF_TRIM_REG3	0xC8
+#define RK806_BUCK_REF_TRIM_REG4	0xC9
+#define RK806_BUCK_REF_TRIM_REG5	0xCA
+#define RK806_BUCK_OSC_TRIM_REG1	0xCB
+#define RK806_BUCK_OSC_TRIM_REG2	0xCC
+#define RK806_BUCK_OSC_TRIM_REG3	0xCD
+#define RK806_BUCK_OSC_TRIM_REG4	0xCE
+#define RK806_BUCK_OSC_TRIM_REG5	0xCF
+#define RK806_BUCK_TRIM_ZCDIOS_REG1	0xD0
+#define RK806_BUCK_TRIM_ZCDIOS_REG2	0xD1
+#define RK806_NLDO_TRIM_REG1		0xD2
+#define RK806_NLDO_TRIM_REG2		0xD3
+#define RK806_NLDO_TRIM_REG3		0xD4
+#define RK806_PLDO_TRIM_REG1		0xD5
+#define RK806_PLDO_TRIM_REG2		0xD6
+#define RK806_PLDO_TRIM_REG3		0xD7
+#define RK806_TRIM_ICOMP_REG1		0xD8
+#define RK806_TRIM_ICOMP_REG2		0xD9
+#define RK806_EFUSE_CONTROL_REGH	0xDA
+#define RK806_FUSE_PROG_REG		0xDB
+#define RK806_MAIN_FSM_STS_REG		0xDD
+#define RK806_FSM_REG			0xDE
+#define RK806_TOP_RESEV_OFFR		0xEC
+#define RK806_TOP_RESEV_POR		0xED
+#define RK806_BUCK_VRSN_REG1		0xEE
+#define RK806_BUCK_VRSN_REG2		0xEF
+#define RK806_NLDO_RLOAD_SEL_REG1	0xF0
+#define RK806_PLDO_RLOAD_SEL_REG1	0xF1
+#define RK806_PLDO_RLOAD_SEL_REG2	0xF2
+#define RK806_BUCK_CMIN_MX_REG1		0xF3
+#define RK806_BUCK_CMIN_MX_REG2		0xF4
+#define RK806_BUCK_FREQ_SET_REG1	0xF5
+#define RK806_BUCK_FREQ_SET_REG2	0xF6
+#define RK806_BUCK_RS_MEABS_REG1	0xF7
+#define RK806_BUCK_RS_MEABS_REG2	0xF8
+#define RK806_BUCK_RS_ZDLEB_REG1	0xF9
+#define RK806_BUCK_RS_ZDLEB_REG2	0xFA
+#define RK806_BUCK_RSERVE_REG1		0xFB
+#define RK806_BUCK_RSERVE_REG2		0xFC
+#define RK806_BUCK_RSERVE_REG3		0xFD
+#define RK806_BUCK_RSERVE_REG4		0xFE
+#define RK806_BUCK_RSERVE_REG5		0xFF
+
+/* INT_STS Register field definitions */
+#define RK806_INT_STS_PWRON_FALL	BIT(0)
+#define RK806_INT_STS_PWRON_RISE	BIT(1)
+#define RK806_INT_STS_PWRON		BIT(2)
+#define RK806_INT_STS_PWRON_LP		BIT(3)
+#define RK806_INT_STS_HOTDIE		BIT(4)
+#define RK806_INT_STS_VDC_RISE		BIT(5)
+#define RK806_INT_STS_VDC_FALL		BIT(6)
+#define RK806_INT_STS_VB_LO		BIT(7)
+#define RK806_INT_STS_REV0		BIT(0)
+#define RK806_INT_STS_REV1		BIT(1)
+#define RK806_INT_STS_REV2		BIT(2)
+#define RK806_INT_STS_CRC_ERROR		BIT(3)
+#define RK806_INT_STS_SLP3_GPIO		BIT(4)
+#define RK806_INT_STS_SLP2_GPIO		BIT(5)
+#define RK806_INT_STS_SLP1_GPIO		BIT(6)
+#define RK806_INT_STS_WDT		BIT(7)
+
+/* SPI command */
+#define RK806_CMD_READ			0
+#define RK806_CMD_WRITE			BIT(7)
+#define RK806_CMD_CRC_EN		BIT(6)
+#define RK806_CMD_CRC_DIS		0
+#define RK806_CMD_LEN_MSK		0x0f
+#define RK806_REG_H			0x00
+
+#define VERSION_AB		0x01
+
+enum rk806_reg_id {
+	RK806_ID_DCDC1 = 0,
+	RK806_ID_DCDC2,
+	RK806_ID_DCDC3,
+	RK806_ID_DCDC4,
+	RK806_ID_DCDC5,
+	RK806_ID_DCDC6,
+	RK806_ID_DCDC7,
+	RK806_ID_DCDC8,
+	RK806_ID_DCDC9,
+	RK806_ID_DCDC10,
+
+	RK806_ID_NLDO1,
+	RK806_ID_NLDO2,
+	RK806_ID_NLDO3,
+	RK806_ID_NLDO4,
+	RK806_ID_NLDO5,
+
+	RK806_ID_PLDO1,
+	RK806_ID_PLDO2,
+	RK806_ID_PLDO3,
+	RK806_ID_PLDO4,
+	RK806_ID_PLDO5,
+	RK806_ID_PLDO6,
+	RK806_ID_END,
+};
+
+/* Define the RK806 IRQ numbers */
+enum rk806_irqs {
+	/* INT_STS0 registers */
+	RK806_IRQ_PWRON_FALL,
+	RK806_IRQ_PWRON_RISE,
+	RK806_IRQ_PWRON,
+	RK806_IRQ_PWRON_LP,
+	RK806_IRQ_HOTDIE,
+	RK806_IRQ_VDC_RISE,
+	RK806_IRQ_VDC_FALL,
+	RK806_IRQ_VB_LO,
+
+	/* INT_STS0 registers */
+	RK806_IRQ_REV0,
+	RK806_IRQ_REV1,
+	RK806_IRQ_REV2,
+	RK806_IRQ_CRC_ERROR,
+	RK806_IRQ_SLP3_GPIO,
+	RK806_IRQ_SLP2_GPIO,
+	RK806_IRQ_SLP1_GPIO,
+	RK806_IRQ_WDT,
+};
+
+/* VCC1 Low Voltage Threshold */
+enum rk806_lv_sel {
+	VB_LO_SEL_2800,
+	VB_LO_SEL_2900,
+	VB_LO_SEL_3000,
+	VB_LO_SEL_3100,
+	VB_LO_SEL_3200,
+	VB_LO_SEL_3300,
+	VB_LO_SEL_3400,
+	VB_LO_SEL_3500,
+};
+
+/* System Shutdown Voltage Select */
+enum rk806_uv_sel {
+	VB_UV_SEL_2700,
+	VB_UV_SEL_2800,
+	VB_UV_SEL_2900,
+	VB_UV_SEL_3000,
+	VB_UV_SEL_3100,
+	VB_UV_SEL_3200,
+	VB_UV_SEL_3300,
+	VB_UV_SEL_3400,
+};
+
+/* Pin Function */
+enum rk806_pwrctrl_fun {
+	PWRCTRL_NULL_FUN,
+	PWRCTRL_SLP_FUN,
+	PWRCTRL_POWOFF_FUN,
+	PWRCTRL_RST_FUN,
+	PWRCTRL_DVS_FUN,
+	PWRCTRL_GPIO_FUN,
+};
+
+/* Pin Polarity */
+enum rk806_pin_level {
+	POL_LOW,
+	POL_HIGH,
+};
+
+enum rk806_vsel_ctr_sel {
+	CTR_BY_NO_EFFECT,
+	CTR_BY_PWRCTRL1,
+	CTR_BY_PWRCTRL2,
+	CTR_BY_PWRCTRL3,
+};
+
+enum rk806_dvs_ctr_sel {
+	CTR_SEL_NO_EFFECT,
+	CTR_SEL_DVS_START1,
+	CTR_SEL_DVS_START2,
+	CTR_SEL_DVS_START3,
+};
+
+enum rk806_pin_dr_sel {
+	RK806_PIN_INPUT,
+	RK806_PIN_OUTPUT,
+};
+
+#define RK806_INT_POL_MSK		BIT(1)
+#define RK806_INT_POL_H			BIT(1)
+#define RK806_INT_POL_L			0
+
+#define RK806_SLAVE_RESTART_FUN_MSK	BIT(1)
+#define RK806_SLAVE_RESTART_FUN_EN	BIT(1)
+#define RK806_SLAVE_RESTART_FUN_OFF	0
+
+#define RK806_SYS_ENB2_2M_MSK		BIT(1)
+#define RK806_SYS_ENB2_2M_EN		BIT(1)
+#define RK806_SYS_ENB2_2M_OFF		0
+
+enum rk806_int_fun {
+	RK806_INT_ONLY,
+	RK806_INT_ADN_WKUP,
+};
+
+enum rk806_dvs_mode {
+	RK806_DVS_NOT_SUPPORT,
+	RK806_DVS_START1,
+	RK806_DVS_START2,
+	RK806_DVS_START3,
+	RK806_DVS_PWRCTRL1,
+	RK806_DVS_PWRCTRL2,
+	RK806_DVS_PWRCTRL3,
+	RK806_DVS_START_PWRCTR1,
+	RK806_DVS_START_PWRCTR2,
+	RK806_DVS_START_PWRCTR3,
+	RK806_DVS_END,
+};
+
 /* RK808 IRQ Definitions */
 #define RK808_IRQ_VOUT_LO	0
 #define RK808_IRQ_VB_LO		1
@@ -780,6 +1188,7 @@ enum {
 
 enum {
 	RK805_ID = 0x8050,
+	RK806_ID = 0x8060,
 	RK808_ID = 0x0000,
 	RK809_ID = 0x8090,
 	RK817_ID = 0x8170,
-- 
2.39.2


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v8 09/14] pinctrl: rk805: add rk806 pinctrl support
  2023-05-04 17:36 [PATCH v8 00/14] mfd/pinctrl/regulator: Add RK806 Support Sebastian Reichel
                   ` (7 preceding siblings ...)
  2023-05-04 17:36 ` [PATCH v8 08/14] mfd: rk8xx: add rk806 support Sebastian Reichel
@ 2023-05-04 17:36 ` Sebastian Reichel
  2023-05-15 15:21   ` Lee Jones
  2023-05-04 17:36 ` [PATCH v8 10/14] regulator: expose regulator_find_closest_bigger Sebastian Reichel
                   ` (6 subsequent siblings)
  15 siblings, 1 reply; 35+ messages in thread
From: Sebastian Reichel @ 2023-05-04 17:36 UTC (permalink / raw)
  To: Heiko Stuebner, Rob Herring, Krzysztof Kozlowski, Lee Jones
  Cc: Michael Turquette, Stephen Boyd, Linus Walleij, Mark Brown,
	Liam Girdwood, Alexandre Belloni, Alessandro Zummo,
	linux-rockchip, devicetree, linux-kernel, Sebastian Reichel,
	kernel, shengfei Xu, Diederik de Haas, Vincent Legoll

Add support for rk806 dvs pinctrl to the existing rk805
driver.

This has been implemented using shengfei Xu's rk806
specific driver from the vendor tree as reference.

Co-developed-by: shengfei Xu <xsf@rock-chips.com>
Signed-off-by: shengfei Xu <xsf@rock-chips.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, Quartz64 Model A + B
Tested-by: Vincent Legoll <vincent.legoll@gmail.com> # Pine64 QuartzPro64
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/pinctrl/pinctrl-rk805.c | 189 ++++++++++++++++++++++++++++----
 1 file changed, 168 insertions(+), 21 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-rk805.c b/drivers/pinctrl/pinctrl-rk805.c
index 7c1f7408fb9a..2639a9ee82cd 100644
--- a/drivers/pinctrl/pinctrl-rk805.c
+++ b/drivers/pinctrl/pinctrl-rk805.c
@@ -1,10 +1,12 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 /*
- * Pinctrl driver for Rockchip RK805 PMIC
+ * Pinctrl driver for Rockchip RK805/RK806 PMIC
  *
  * Copyright (c) 2017, Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
  *
  * Author: Joseph Chen <chenjh@rock-chips.com>
+ * Author: Xu Shengfei <xsf@rock-chips.com>
  *
  * Based on the pinctrl-as3722 driver
  */
@@ -44,6 +46,7 @@ struct rk805_pin_group {
 
 /*
  * @reg: gpio setting register;
+ * @fun_reg: functions select register;
  * @fun_mask: functions select mask value, when set is gpio;
  * @dir_mask: input or output mask value, when set is output, otherwise input;
  * @val_mask: gpio set value, when set is level high, otherwise low;
@@ -56,6 +59,7 @@ struct rk805_pin_group {
  */
 struct rk805_pin_config {
 	u8 reg;
+	u8 fun_reg;
 	u8 fun_msk;
 	u8 dir_msk;
 	u8 val_msk;
@@ -80,22 +84,50 @@ enum rk805_pinmux_option {
 	RK805_PINMUX_GPIO,
 };
 
+enum rk806_pinmux_option {
+	RK806_PINMUX_FUN0 = 0,
+	RK806_PINMUX_FUN1,
+	RK806_PINMUX_FUN2,
+	RK806_PINMUX_FUN3,
+	RK806_PINMUX_FUN4,
+	RK806_PINMUX_FUN5,
+};
+
 enum {
 	RK805_GPIO0,
 	RK805_GPIO1,
 };
 
+enum {
+	RK806_GPIO_DVS1,
+	RK806_GPIO_DVS2,
+	RK806_GPIO_DVS3
+};
+
 static const char *const rk805_gpio_groups[] = {
 	"gpio0",
 	"gpio1",
 };
 
+static const char *const rk806_gpio_groups[] = {
+	"gpio_pwrctrl1",
+	"gpio_pwrctrl2",
+	"gpio_pwrctrl3",
+};
+
 /* RK805: 2 output only GPIOs */
 static const struct pinctrl_pin_desc rk805_pins_desc[] = {
 	PINCTRL_PIN(RK805_GPIO0, "gpio0"),
 	PINCTRL_PIN(RK805_GPIO1, "gpio1"),
 };
 
+/* RK806 */
+static const struct pinctrl_pin_desc rk806_pins_desc[] = {
+	PINCTRL_PIN(RK806_GPIO_DVS1, "gpio_pwrctrl1"),
+	PINCTRL_PIN(RK806_GPIO_DVS2, "gpio_pwrctrl2"),
+	PINCTRL_PIN(RK806_GPIO_DVS3, "gpio_pwrctrl3"),
+};
+
 static const struct rk805_pin_function rk805_pin_functions[] = {
 	{
 		.name = "gpio",
@@ -105,6 +137,45 @@ static const struct rk805_pin_function rk805_pin_functions[] = {
 	},
 };
 
+static const struct rk805_pin_function rk806_pin_functions[] = {
+	{
+		.name = "pin_fun0",
+		.groups = rk806_gpio_groups,
+		.ngroups = ARRAY_SIZE(rk806_gpio_groups),
+		.mux_option = RK806_PINMUX_FUN0,
+	},
+	{
+		.name = "pin_fun1",
+		.groups = rk806_gpio_groups,
+		.ngroups = ARRAY_SIZE(rk806_gpio_groups),
+		.mux_option = RK806_PINMUX_FUN1,
+	},
+	{
+		.name = "pin_fun2",
+		.groups = rk806_gpio_groups,
+		.ngroups = ARRAY_SIZE(rk806_gpio_groups),
+		.mux_option = RK806_PINMUX_FUN2,
+	},
+	{
+		.name = "pin_fun3",
+		.groups = rk806_gpio_groups,
+		.ngroups = ARRAY_SIZE(rk806_gpio_groups),
+		.mux_option = RK806_PINMUX_FUN3,
+	},
+	{
+		.name = "pin_fun4",
+		.groups = rk806_gpio_groups,
+		.ngroups = ARRAY_SIZE(rk806_gpio_groups),
+		.mux_option = RK806_PINMUX_FUN4,
+	},
+	{
+		.name = "pin_fun5",
+		.groups = rk806_gpio_groups,
+		.ngroups = ARRAY_SIZE(rk806_gpio_groups),
+		.mux_option = RK806_PINMUX_FUN5,
+	},
+};
+
 static const struct rk805_pin_group rk805_pin_groups[] = {
 	{
 		.name = "gpio0",
@@ -118,6 +189,24 @@ static const struct rk805_pin_group rk805_pin_groups[] = {
 	},
 };
 
+static const struct rk805_pin_group rk806_pin_groups[] = {
+	{
+		.name = "gpio_pwrctrl1",
+		.pins = { RK806_GPIO_DVS1 },
+		.npins = 1,
+	},
+	{
+		.name = "gpio_pwrctrl2",
+		.pins = { RK806_GPIO_DVS2 },
+		.npins = 1,
+	},
+	{
+		.name = "gpio_pwrctrl3",
+		.pins = { RK806_GPIO_DVS3 },
+		.npins = 1,
+	}
+};
+
 #define RK805_GPIO0_VAL_MSK	BIT(0)
 #define RK805_GPIO1_VAL_MSK	BIT(1)
 
@@ -132,6 +221,40 @@ static const struct rk805_pin_config rk805_gpio_cfgs[] = {
 	},
 };
 
+#define RK806_PWRCTRL1_DR	BIT(0)
+#define RK806_PWRCTRL2_DR	BIT(1)
+#define RK806_PWRCTRL3_DR	BIT(2)
+#define RK806_PWRCTRL1_DATA	BIT(4)
+#define RK806_PWRCTRL2_DATA	BIT(5)
+#define RK806_PWRCTRL3_DATA	BIT(6)
+#define RK806_PWRCTRL1_FUN	GENMASK(2, 0)
+#define RK806_PWRCTRL2_FUN	GENMASK(6, 4)
+#define RK806_PWRCTRL3_FUN	GENMASK(2, 0)
+
+static struct rk805_pin_config rk806_gpio_cfgs[] = {
+	{
+		.fun_reg = RK806_SLEEP_CONFIG0,
+		.fun_msk = RK806_PWRCTRL1_FUN,
+		.reg = RK806_SLEEP_GPIO,
+		.val_msk = RK806_PWRCTRL1_DATA,
+		.dir_msk = RK806_PWRCTRL1_DR,
+	},
+	{
+		.fun_reg = RK806_SLEEP_CONFIG0,
+		.fun_msk = RK806_PWRCTRL2_FUN,
+		.reg = RK806_SLEEP_GPIO,
+		.val_msk = RK806_PWRCTRL2_DATA,
+		.dir_msk = RK806_PWRCTRL2_DR,
+	},
+	{
+		.fun_reg = RK806_SLEEP_CONFIG1,
+		.fun_msk = RK806_PWRCTRL3_FUN,
+		.reg = RK806_SLEEP_GPIO,
+		.val_msk = RK806_PWRCTRL3_DATA,
+		.dir_msk = RK806_PWRCTRL3_DR,
+	}
+};
+
 /* generic gpio chip */
 static int rk805_gpio_get(struct gpio_chip *chip, unsigned int offset)
 {
@@ -289,19 +412,13 @@ static int _rk805_pinctrl_set_mux(struct pinctrl_dev *pctldev,
 	if (!pci->pin_cfg[offset].fun_msk)
 		return 0;
 
-	if (mux == RK805_PINMUX_GPIO) {
-		ret = regmap_update_bits(pci->rk808->regmap,
-					 pci->pin_cfg[offset].reg,
-					 pci->pin_cfg[offset].fun_msk,
-					 pci->pin_cfg[offset].fun_msk);
-		if (ret) {
-			dev_err(pci->dev, "set gpio%d GPIO failed\n", offset);
-			return ret;
-		}
-	} else {
-		dev_err(pci->dev, "Couldn't find function mux %d\n", mux);
-		return -EINVAL;
-	}
+	mux <<= ffs(pci->pin_cfg[offset].fun_msk) - 1;
+	ret = regmap_update_bits(pci->rk808->regmap,
+				 pci->pin_cfg[offset].fun_reg,
+				 pci->pin_cfg[offset].fun_msk, mux);
+
+	if (ret)
+		dev_err(pci->dev, "set gpio%d func%d failed\n", offset, mux);
 
 	return 0;
 }
@@ -317,6 +434,22 @@ static int rk805_pinctrl_set_mux(struct pinctrl_dev *pctldev,
 	return _rk805_pinctrl_set_mux(pctldev, offset, mux);
 }
 
+static int rk805_pinctrl_gpio_request_enable(struct pinctrl_dev *pctldev,
+					     struct pinctrl_gpio_range *range,
+					     unsigned int offset)
+{
+	struct rk805_pctrl_info *pci = pinctrl_dev_get_drvdata(pctldev);
+
+	switch (pci->rk808->variant) {
+	case RK805_ID:
+		return _rk805_pinctrl_set_mux(pctldev, offset, RK805_PINMUX_GPIO);
+	case RK806_ID:
+		return _rk805_pinctrl_set_mux(pctldev, offset, RK806_PINMUX_FUN5);
+	}
+
+	return -ENOTSUPP;
+}
+
 static int rk805_pmx_gpio_set_direction(struct pinctrl_dev *pctldev,
 					struct pinctrl_gpio_range *range,
 					unsigned int offset, bool input)
@@ -324,13 +457,6 @@ static int rk805_pmx_gpio_set_direction(struct pinctrl_dev *pctldev,
 	struct rk805_pctrl_info *pci = pinctrl_dev_get_drvdata(pctldev);
 	int ret;
 
-	/* switch to gpio function */
-	ret = _rk805_pinctrl_set_mux(pctldev, offset, RK805_PINMUX_GPIO);
-	if (ret) {
-		dev_err(pci->dev, "set gpio%d mux failed\n", offset);
-		return ret;
-	}
-
 	/* set direction */
 	if (!pci->pin_cfg[offset].dir_msk)
 		return 0;
@@ -352,6 +478,7 @@ static const struct pinmux_ops rk805_pinmux_ops = {
 	.get_function_name	= rk805_pinctrl_get_func_name,
 	.get_function_groups	= rk805_pinctrl_get_func_groups,
 	.set_mux		= rk805_pinctrl_set_mux,
+	.gpio_request_enable	= rk805_pinctrl_gpio_request_enable,
 	.gpio_set_direction	= rk805_pmx_gpio_set_direction,
 };
 
@@ -364,6 +491,7 @@ static int rk805_pinconf_get(struct pinctrl_dev *pctldev,
 
 	switch (param) {
 	case PIN_CONFIG_OUTPUT:
+	case PIN_CONFIG_INPUT_ENABLE:
 		arg = rk805_gpio_get(&pci->gpio_chip, pin);
 		break;
 	default:
@@ -393,6 +521,12 @@ static int rk805_pinconf_set(struct pinctrl_dev *pctldev,
 			rk805_gpio_set(&pci->gpio_chip, pin, arg);
 			rk805_pmx_gpio_set_direction(pctldev, NULL, pin, false);
 			break;
+		case PIN_CONFIG_INPUT_ENABLE:
+			if (pci->rk808->variant != RK805_ID && arg) {
+				rk805_pmx_gpio_set_direction(pctldev, NULL, pin, true);
+				break;
+			}
+			fallthrough;
 		default:
 			dev_err(pci->dev, "Properties not supported\n");
 			return -ENOTSUPP;
@@ -448,6 +582,18 @@ static int rk805_pinctrl_probe(struct platform_device *pdev)
 		pci->pin_cfg = rk805_gpio_cfgs;
 		pci->gpio_chip.ngpio = ARRAY_SIZE(rk805_gpio_cfgs);
 		break;
+	case RK806_ID:
+		pci->pins = rk806_pins_desc;
+		pci->num_pins = ARRAY_SIZE(rk806_pins_desc);
+		pci->functions = rk806_pin_functions;
+		pci->num_functions = ARRAY_SIZE(rk806_pin_functions);
+		pci->groups = rk806_pin_groups;
+		pci->num_pin_groups = ARRAY_SIZE(rk806_pin_groups);
+		pci->pinctrl_desc.pins = rk806_pins_desc;
+		pci->pinctrl_desc.npins = ARRAY_SIZE(rk806_pins_desc);
+		pci->pin_cfg = rk806_gpio_cfgs;
+		pci->gpio_chip.ngpio = ARRAY_SIZE(rk806_gpio_cfgs);
+		break;
 	default:
 		dev_err(&pdev->dev, "unsupported RK805 ID %lu\n",
 			pci->rk808->variant);
@@ -488,5 +634,6 @@ static struct platform_driver rk805_pinctrl_driver = {
 module_platform_driver(rk805_pinctrl_driver);
 
 MODULE_DESCRIPTION("RK805 pin control and GPIO driver");
+MODULE_AUTHOR("Xu Shengfei <xsf@rock-chips.com>");
 MODULE_AUTHOR("Joseph Chen <chenjh@rock-chips.com>");
 MODULE_LICENSE("GPL v2");
-- 
2.39.2


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v8 10/14] regulator: expose regulator_find_closest_bigger
  2023-05-04 17:36 [PATCH v8 00/14] mfd/pinctrl/regulator: Add RK806 Support Sebastian Reichel
                   ` (8 preceding siblings ...)
  2023-05-04 17:36 ` [PATCH v8 09/14] pinctrl: rk805: add rk806 pinctrl support Sebastian Reichel
@ 2023-05-04 17:36 ` Sebastian Reichel
  2023-05-04 17:36 ` [PATCH v8 11/14] regulator: rk808: fix asynchronous probing Sebastian Reichel
                   ` (5 subsequent siblings)
  15 siblings, 0 replies; 35+ messages in thread
From: Sebastian Reichel @ 2023-05-04 17:36 UTC (permalink / raw)
  To: Heiko Stuebner, Rob Herring, Krzysztof Kozlowski, Lee Jones
  Cc: Michael Turquette, Stephen Boyd, Linus Walleij, Mark Brown,
	Liam Girdwood, Alexandre Belloni, Alessandro Zummo,
	linux-rockchip, devicetree, linux-kernel, Sebastian Reichel,
	kernel, Diederik de Haas, Vincent Legoll

Expose and document the table lookup logic used by
regulator_set_ramp_delay_regmap, so that it can be
reused for devices that cannot be configured via
regulator_set_ramp_delay_regmap.

Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, Quartz64 Model A + B
Tested-by: Vincent Legoll <vincent.legoll@gmail.com> # Pine64 QuartzPro64
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/regulator/helpers.c      | 22 ++++++++++++++++++----
 include/linux/regulator/driver.h |  2 ++
 2 files changed, 20 insertions(+), 4 deletions(-)

diff --git a/drivers/regulator/helpers.c b/drivers/regulator/helpers.c
index ad2237a95572..586f42e378ee 100644
--- a/drivers/regulator/helpers.c
+++ b/drivers/regulator/helpers.c
@@ -902,8 +902,21 @@ bool regulator_is_equal(struct regulator *reg1, struct regulator *reg2)
 }
 EXPORT_SYMBOL_GPL(regulator_is_equal);
 
-static int find_closest_bigger(unsigned int target, const unsigned int *table,
-			       unsigned int num_sel, unsigned int *sel)
+/**
+ * regulator_find_closest_bigger - helper to find offset in ramp delay table
+ *
+ * @target: targeted ramp_delay
+ * @table: table with supported ramp delays
+ * @num_sel: number of entries in the table
+ * @sel: Pointer to store table offset
+ *
+ * This is the internal helper used by regulator_set_ramp_delay_regmap to
+ * map ramp delay to register value. It should only be used directly if
+ * regulator_set_ramp_delay_regmap cannot handle a specific device setup
+ * (e.g. because the value is split over multiple registers).
+ */
+int regulator_find_closest_bigger(unsigned int target, const unsigned int *table,
+				  unsigned int num_sel, unsigned int *sel)
 {
 	unsigned int s, tmp, max, maxsel = 0;
 	bool found = false;
@@ -933,6 +946,7 @@ static int find_closest_bigger(unsigned int target, const unsigned int *table,
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(regulator_find_closest_bigger);
 
 /**
  * regulator_set_ramp_delay_regmap - set_ramp_delay() helper
@@ -951,8 +965,8 @@ int regulator_set_ramp_delay_regmap(struct regulator_dev *rdev, int ramp_delay)
 	if (WARN_ON(!rdev->desc->n_ramp_values || !rdev->desc->ramp_delay_table))
 		return -EINVAL;
 
-	ret = find_closest_bigger(ramp_delay, rdev->desc->ramp_delay_table,
-				  rdev->desc->n_ramp_values, &sel);
+	ret = regulator_find_closest_bigger(ramp_delay, rdev->desc->ramp_delay_table,
+					    rdev->desc->n_ramp_values, &sel);
 
 	if (ret) {
 		dev_warn(rdev_get_dev(rdev),
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index d3b4a3d4514a..c6ef7d68eb9a 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -758,6 +758,8 @@ int regulator_set_current_limit_regmap(struct regulator_dev *rdev,
 				       int min_uA, int max_uA);
 int regulator_get_current_limit_regmap(struct regulator_dev *rdev);
 void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data);
+int regulator_find_closest_bigger(unsigned int target, const unsigned int *table,
+				  unsigned int num_sel, unsigned int *sel);
 int regulator_set_ramp_delay_regmap(struct regulator_dev *rdev, int ramp_delay);
 int regulator_sync_voltage_rdev(struct regulator_dev *rdev);
 
-- 
2.39.2


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v8 11/14] regulator: rk808: fix asynchronous probing
  2023-05-04 17:36 [PATCH v8 00/14] mfd/pinctrl/regulator: Add RK806 Support Sebastian Reichel
                   ` (9 preceding siblings ...)
  2023-05-04 17:36 ` [PATCH v8 10/14] regulator: expose regulator_find_closest_bigger Sebastian Reichel
@ 2023-05-04 17:36 ` Sebastian Reichel
  2023-05-04 17:36 ` [PATCH v8 12/14] regulator: rk808: cleanup parent device usage Sebastian Reichel
                   ` (4 subsequent siblings)
  15 siblings, 0 replies; 35+ messages in thread
From: Sebastian Reichel @ 2023-05-04 17:36 UTC (permalink / raw)
  To: Heiko Stuebner, Rob Herring, Krzysztof Kozlowski, Lee Jones
  Cc: Michael Turquette, Stephen Boyd, Linus Walleij, Mark Brown,
	Liam Girdwood, Alexandre Belloni, Alessandro Zummo,
	linux-rockchip, devicetree, linux-kernel, Sebastian Reichel,
	kernel

If the probe routine fails with -EPROBE_DEFER after taking over the
OF node from its parent driver, reprobing triggers pinctrl_bind_pins()
and that will fail. Fix this by setting of_node_reused, so that the
device does not try to setup pin muxing.

For me this always happens once the driver is marked to prefer async
probing and never happens without that flag.

Fixes: 259b93b21a9f ("regulator: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in 4.14")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/regulator/rk808-regulator.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c
index 3637e81654a8..80ba782d8923 100644
--- a/drivers/regulator/rk808-regulator.c
+++ b/drivers/regulator/rk808-regulator.c
@@ -1336,6 +1336,7 @@ static int rk808_regulator_probe(struct platform_device *pdev)
 
 	config.dev = &pdev->dev;
 	config.dev->of_node = pdev->dev.parent->of_node;
+	config.dev->of_node_reused = true;
 	config.driver_data = pdata;
 	config.regmap = regmap;
 
-- 
2.39.2


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v8 12/14] regulator: rk808: cleanup parent device usage
  2023-05-04 17:36 [PATCH v8 00/14] mfd/pinctrl/regulator: Add RK806 Support Sebastian Reichel
                   ` (10 preceding siblings ...)
  2023-05-04 17:36 ` [PATCH v8 11/14] regulator: rk808: fix asynchronous probing Sebastian Reichel
@ 2023-05-04 17:36 ` Sebastian Reichel
  2023-05-04 17:36 ` [PATCH v8 13/14] regulator: rk808: revert to synchronous probing Sebastian Reichel
                   ` (3 subsequent siblings)
  15 siblings, 0 replies; 35+ messages in thread
From: Sebastian Reichel @ 2023-05-04 17:36 UTC (permalink / raw)
  To: Heiko Stuebner, Rob Herring, Krzysztof Kozlowski, Lee Jones
  Cc: Michael Turquette, Stephen Boyd, Linus Walleij, Mark Brown,
	Liam Girdwood, Alexandre Belloni, Alessandro Zummo,
	linux-rockchip, devicetree, linux-kernel, Sebastian Reichel,
	kernel

By overridering the device's of_node a bit earlier we can
get the GPIOs and any other DT properties from our own
device instead of relying on the parent device.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/regulator/rk808-regulator.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c
index 80ba782d8923..71a1ca8b917e 100644
--- a/drivers/regulator/rk808-regulator.c
+++ b/drivers/regulator/rk808-regulator.c
@@ -1245,20 +1245,19 @@ static const struct regulator_desc rk818_reg[] = {
 };
 
 static int rk808_regulator_dt_parse_pdata(struct device *dev,
-				   struct device *client_dev,
 				   struct regmap *map,
 				   struct rk808_regulator_data *pdata)
 {
 	struct device_node *np;
 	int tmp, ret = 0, i;
 
-	np = of_get_child_by_name(client_dev->of_node, "regulators");
+	np = of_get_child_by_name(dev->of_node, "regulators");
 	if (!np)
 		return -ENXIO;
 
 	for (i = 0; i < ARRAY_SIZE(pdata->dvs_gpio); i++) {
 		pdata->dvs_gpio[i] =
-			devm_gpiod_get_index_optional(client_dev, "dvs", i,
+			devm_gpiod_get_index_optional(dev, "dvs", i,
 						      GPIOD_OUT_LOW);
 		if (IS_ERR(pdata->dvs_gpio[i])) {
 			ret = PTR_ERR(pdata->dvs_gpio[i]);
@@ -1292,6 +1291,9 @@ static int rk808_regulator_probe(struct platform_device *pdev)
 	struct regmap *regmap;
 	int ret, i, nregulators;
 
+	pdev->dev.of_node = pdev->dev.parent->of_node;
+	pdev->dev.of_node_reused = true;
+
 	regmap = dev_get_regmap(pdev->dev.parent, NULL);
 	if (!regmap)
 		return -ENODEV;
@@ -1300,8 +1302,7 @@ static int rk808_regulator_probe(struct platform_device *pdev)
 	if (!pdata)
 		return -ENOMEM;
 
-	ret = rk808_regulator_dt_parse_pdata(&pdev->dev, pdev->dev.parent,
-					     regmap, pdata);
+	ret = rk808_regulator_dt_parse_pdata(&pdev->dev, regmap, pdata);
 	if (ret < 0)
 		return ret;
 
@@ -1335,8 +1336,6 @@ static int rk808_regulator_probe(struct platform_device *pdev)
 	}
 
 	config.dev = &pdev->dev;
-	config.dev->of_node = pdev->dev.parent->of_node;
-	config.dev->of_node_reused = true;
 	config.driver_data = pdata;
 	config.regmap = regmap;
 
-- 
2.39.2


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v8 13/14] regulator: rk808: revert to synchronous probing
  2023-05-04 17:36 [PATCH v8 00/14] mfd/pinctrl/regulator: Add RK806 Support Sebastian Reichel
                   ` (11 preceding siblings ...)
  2023-05-04 17:36 ` [PATCH v8 12/14] regulator: rk808: cleanup parent device usage Sebastian Reichel
@ 2023-05-04 17:36 ` Sebastian Reichel
  2023-05-04 17:36 ` [PATCH v8 14/14] regulator: rk808: add rk806 support Sebastian Reichel
                   ` (2 subsequent siblings)
  15 siblings, 0 replies; 35+ messages in thread
From: Sebastian Reichel @ 2023-05-04 17:36 UTC (permalink / raw)
  To: Heiko Stuebner, Rob Herring, Krzysztof Kozlowski, Lee Jones
  Cc: Michael Turquette, Stephen Boyd, Linus Walleij, Mark Brown,
	Liam Girdwood, Alexandre Belloni, Alessandro Zummo,
	linux-rockchip, devicetree, linux-kernel, Sebastian Reichel,
	kernel

The rk808 driver registers a bunch of regulator devices in a loop.
If one of the later regulators fails to register (usually because
its input supply is not yet available) everything will be unrolled
(i.e. previously registered regulators will be unregistered). With
asynchronous registration there might already be consumers, though.
We do not have the necessary infrastructure to properly unregister
the consumer device, so this scenario should be avoided.

First checking all input supplies or disallowing usage of the regulators
until all are registered does not work, since there can be
self-references (e.g. DCDC channels providing the supply of LDOs).

The only sensible solution I found is registering the regulator devices
asynchronously, so that we do not have to unroll. Since this is a major
rework let's revert back to synchronous probing for now to fix the issue
at hand.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/regulator/rk808-regulator.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c
index 71a1ca8b917e..5f14d6dd4593 100644
--- a/drivers/regulator/rk808-regulator.c
+++ b/drivers/regulator/rk808-regulator.c
@@ -1355,7 +1355,7 @@ static struct platform_driver rk808_regulator_driver = {
 	.probe = rk808_regulator_probe,
 	.driver = {
 		.name = "rk808-regulator",
-		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+		.probe_type = PROBE_FORCE_SYNCHRONOUS,
 	},
 };
 
-- 
2.39.2


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v8 14/14] regulator: rk808: add rk806 support
  2023-05-04 17:36 [PATCH v8 00/14] mfd/pinctrl/regulator: Add RK806 Support Sebastian Reichel
                   ` (12 preceding siblings ...)
  2023-05-04 17:36 ` [PATCH v8 13/14] regulator: rk808: revert to synchronous probing Sebastian Reichel
@ 2023-05-04 17:36 ` Sebastian Reichel
  2023-05-15 15:24 ` [GIT PULL] Immutable branch between MFD, Clk, Input, Pinctrl, RTC, Power, Regulator and Sound due for the v6.5 merge window Lee Jones
  2023-05-23 21:44 ` (subset) [PATCH v8 00/14] mfd/pinctrl/regulator: Add RK806 Support Mark Brown
  15 siblings, 0 replies; 35+ messages in thread
From: Sebastian Reichel @ 2023-05-04 17:36 UTC (permalink / raw)
  To: Heiko Stuebner, Rob Herring, Krzysztof Kozlowski, Lee Jones
  Cc: Michael Turquette, Stephen Boyd, Linus Walleij, Mark Brown,
	Liam Girdwood, Alexandre Belloni, Alessandro Zummo,
	linux-rockchip, devicetree, linux-kernel, Sebastian Reichel,
	kernel, shengfei Xu, Matti Vaittinen, Diederik de Haas,
	Vincent Legoll

Add rk806 support to the existing rk808 regulator
driver.

This has been implemented using shengfei Xu's rk806
specific driver from the vendor tree as reference.

Co-developed-by: shengfei Xu <xsf@rock-chips.com>
Signed-off-by: shengfei Xu <xsf@rock-chips.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, Quartz64 Model A + B
Tested-by: Vincent Legoll <vincent.legoll@gmail.com> # Pine64 QuartzPro64
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/regulator/rk808-regulator.c | 385 ++++++++++++++++++++++++++++
 1 file changed, 385 insertions(+)

diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c
index 5f14d6dd4593..460525ed006c 100644
--- a/drivers/regulator/rk808-regulator.c
+++ b/drivers/regulator/rk808-regulator.c
@@ -3,9 +3,11 @@
  * Regulator driver for Rockchip RK805/RK808/RK818
  *
  * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
  *
  * Author: Chris Zhong <zyw@rock-chips.com>
  * Author: Zhang Qing <zhangqing@rock-chips.com>
+ * Author: Xu Shengfei <xsf@rock-chips.com>
  *
  * Copyright (C) 2016 PHYTEC Messtechnik GmbH
  *
@@ -39,6 +41,13 @@
 #define RK818_LDO3_ON_VSEL_MASK		0xf
 #define RK818_BOOST_ON_VSEL_MASK	0xe0
 
+#define RK806_DCDC_SLP_REG_OFFSET	0x0A
+#define RK806_NLDO_SLP_REG_OFFSET	0x05
+#define RK806_PLDO_SLP_REG_OFFSET	0x06
+
+#define RK806_BUCK_SEL_CNT		0xff
+#define RK806_LDO_SEL_CNT		0xff
+
 /* Ramp rate definitions for buck1 / buck2 only */
 #define RK808_RAMP_RATE_OFFSET		3
 #define RK808_RAMP_RATE_MASK		(3 << RK808_RAMP_RATE_OFFSET)
@@ -117,6 +126,34 @@
 	RK8XX_DESC_COM(_id, _match, _supply, _min, _max, _step, _vreg,	\
 	_vmask, _ereg, _emask, 0, 0, _etime, &rk805_reg_ops)
 
+#define RK806_REGULATOR(_name, _supply_name, _id, _ops,\
+			_n_voltages, _vr, _er, _lr, ctrl_bit,\
+			_rr, _rm, _rt)\
+[_id] = {\
+		.name = _name,\
+		.supply_name = _supply_name,\
+		.of_match = of_match_ptr(_name),\
+		.regulators_node = of_match_ptr("regulators"),\
+		.id = _id,\
+		.ops = &_ops,\
+		.type = REGULATOR_VOLTAGE,\
+		.n_voltages = _n_voltages,\
+		.linear_ranges = _lr,\
+		.n_linear_ranges = ARRAY_SIZE(_lr),\
+		.vsel_reg = _vr,\
+		.vsel_mask = 0xff,\
+		.enable_reg = _er,\
+		.enable_mask = ENABLE_MASK(ctrl_bit),\
+		.enable_val = ENABLE_MASK(ctrl_bit),\
+		.disable_val = DISABLE_VAL(ctrl_bit),\
+		.of_map_mode = rk8xx_regulator_of_map_mode,\
+		.ramp_reg = _rr,\
+		.ramp_mask = _rm,\
+		.ramp_delay_table = _rt, \
+		.n_ramp_values = ARRAY_SIZE(_rt), \
+		.owner = THIS_MODULE,\
+	}
+
 #define RK8XX_DESC(_id, _match, _supply, _min, _max, _step, _vreg,	\
 	_vmask, _ereg, _emask, _etime)					\
 	RK8XX_DESC_COM(_id, _match, _supply, _min, _max, _step, _vreg,	\
@@ -153,6 +190,17 @@
 	RKXX_DESC_SWITCH_COM(_id, _match, _supply, _ereg, _emask,	\
 	0, 0, &rk808_switch_ops)
 
+struct rk8xx_register_bit {
+	u8 reg;
+	u8 bit;
+};
+
+#define RK8XX_REG_BIT(_reg, _bit)					\
+	{								\
+		.reg = _reg,						\
+		.bit = BIT(_bit),						\
+	}
+
 struct rk808_regulator_data {
 	struct gpio_desc *dvs_gpio[2];
 };
@@ -216,6 +264,133 @@ static const unsigned int rk817_buck1_4_ramp_table[] = {
 	3000, 6300, 12500, 25000
 };
 
+static int rk806_set_mode_dcdc(struct regulator_dev *rdev, unsigned int mode)
+{
+	int rid = rdev_get_id(rdev);
+	int ctr_bit, reg;
+
+	reg = RK806_POWER_FPWM_EN0 + rid / 8;
+	ctr_bit = rid % 8;
+
+	switch (mode) {
+	case REGULATOR_MODE_FAST:
+		return regmap_update_bits(rdev->regmap, reg,
+					  PWM_MODE_MSK << ctr_bit,
+					  FPWM_MODE << ctr_bit);
+	case REGULATOR_MODE_NORMAL:
+		return regmap_update_bits(rdev->regmap, reg,
+					  PWM_MODE_MSK << ctr_bit,
+					  AUTO_PWM_MODE << ctr_bit);
+	default:
+		dev_err(rdev_get_dev(rdev), "mode unsupported: %u\n", mode);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static unsigned int rk806_get_mode_dcdc(struct regulator_dev *rdev)
+{
+	int rid = rdev_get_id(rdev);
+	int ctr_bit, reg;
+	unsigned int val;
+	int err;
+
+	reg = RK806_POWER_FPWM_EN0 + rid / 8;
+	ctr_bit = rid % 8;
+
+	err = regmap_read(rdev->regmap, reg, &val);
+	if (err)
+		return err;
+
+	if ((val >> ctr_bit) & FPWM_MODE)
+		return REGULATOR_MODE_FAST;
+	else
+		return REGULATOR_MODE_NORMAL;
+}
+
+static const struct rk8xx_register_bit rk806_dcdc_rate2[] = {
+	RK8XX_REG_BIT(0xEB, 0),
+	RK8XX_REG_BIT(0xEB, 1),
+	RK8XX_REG_BIT(0xEB, 2),
+	RK8XX_REG_BIT(0xEB, 3),
+	RK8XX_REG_BIT(0xEB, 4),
+	RK8XX_REG_BIT(0xEB, 5),
+	RK8XX_REG_BIT(0xEB, 6),
+	RK8XX_REG_BIT(0xEB, 7),
+	RK8XX_REG_BIT(0xEA, 0),
+	RK8XX_REG_BIT(0xEA, 1),
+};
+
+static const unsigned int rk806_ramp_delay_table_dcdc[] = {
+	50000, 25000, 12500, 6250, 3125, 1560, 961, 390
+};
+
+static int rk806_set_ramp_delay_dcdc(struct regulator_dev *rdev, int ramp_delay)
+{
+	int rid = rdev_get_id(rdev);
+	int regval, ramp_value, ret;
+
+	ret = regulator_find_closest_bigger(ramp_delay, rdev->desc->ramp_delay_table,
+					    rdev->desc->n_ramp_values, &ramp_value);
+	if (ret) {
+		dev_warn(rdev_get_dev(rdev),
+			 "Can't set ramp-delay %u, setting %u\n", ramp_delay,
+			 rdev->desc->ramp_delay_table[ramp_value]);
+	}
+
+	regval = ramp_value << (ffs(rdev->desc->ramp_mask) - 1);
+
+	ret = regmap_update_bits(rdev->regmap, rdev->desc->ramp_reg,
+				 rdev->desc->ramp_mask, regval);
+	if (ret)
+		return ret;
+
+	/*
+	 * The above is effectively a copy of regulator_set_ramp_delay_regmap(),
+	 * but that only stores the lower 2 bits for rk806 DCDC ramp. The MSB must
+	 * be stored in a separate register, so this open codes the implementation
+	 * to have access to the ramp_value.
+	 */
+
+	regval = (ramp_value >> 2) & 0x1 ? rk806_dcdc_rate2[rid].bit : 0;
+	return regmap_update_bits(rdev->regmap, rk806_dcdc_rate2[rid].reg,
+				  rk806_dcdc_rate2[rid].bit,
+				  regval);
+}
+
+static const unsigned int rk806_ramp_delay_table_ldo[] = {
+	100000, 50000, 25000, 12500, 6280, 3120, 1900, 780
+};
+
+static int rk806_set_suspend_voltage_range(struct regulator_dev *rdev, int reg_offset, int uv)
+{
+	int sel = regulator_map_voltage_linear_range(rdev, uv, uv);
+	unsigned int reg;
+
+	if (sel < 0)
+		return -EINVAL;
+
+	reg = rdev->desc->vsel_reg + reg_offset;
+
+	return regmap_update_bits(rdev->regmap, reg, rdev->desc->vsel_mask, sel);
+}
+
+static int rk806_set_suspend_voltage_range_dcdc(struct regulator_dev *rdev, int uv)
+{
+	return rk806_set_suspend_voltage_range(rdev, RK806_DCDC_SLP_REG_OFFSET, uv);
+}
+
+static int rk806_set_suspend_voltage_range_nldo(struct regulator_dev *rdev, int uv)
+{
+	return rk806_set_suspend_voltage_range(rdev, RK806_NLDO_SLP_REG_OFFSET, uv);
+}
+
+static int rk806_set_suspend_voltage_range_pldo(struct regulator_dev *rdev, int uv)
+{
+	return rk806_set_suspend_voltage_range(rdev, RK806_PLDO_SLP_REG_OFFSET, uv);
+}
+
 static int rk808_buck1_2_get_voltage_sel_regmap(struct regulator_dev *rdev)
 {
 	struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev);
@@ -393,6 +568,47 @@ static int rk805_set_suspend_disable(struct regulator_dev *rdev)
 				  0);
 }
 
+static const struct rk8xx_register_bit rk806_suspend_bits[] = {
+	RK8XX_REG_BIT(RK806_POWER_SLP_EN0, 0),
+	RK8XX_REG_BIT(RK806_POWER_SLP_EN0, 1),
+	RK8XX_REG_BIT(RK806_POWER_SLP_EN0, 2),
+	RK8XX_REG_BIT(RK806_POWER_SLP_EN0, 3),
+	RK8XX_REG_BIT(RK806_POWER_SLP_EN0, 4),
+	RK8XX_REG_BIT(RK806_POWER_SLP_EN0, 5),
+	RK8XX_REG_BIT(RK806_POWER_SLP_EN0, 6),
+	RK8XX_REG_BIT(RK806_POWER_SLP_EN0, 7),
+	RK8XX_REG_BIT(RK806_POWER_SLP_EN1, 6),
+	RK8XX_REG_BIT(RK806_POWER_SLP_EN1, 7),
+	RK8XX_REG_BIT(RK806_POWER_SLP_EN1, 0),
+	RK8XX_REG_BIT(RK806_POWER_SLP_EN1, 1),
+	RK8XX_REG_BIT(RK806_POWER_SLP_EN1, 2),
+	RK8XX_REG_BIT(RK806_POWER_SLP_EN1, 3),
+	RK8XX_REG_BIT(RK806_POWER_SLP_EN1, 4),
+	RK8XX_REG_BIT(RK806_POWER_SLP_EN2, 1),
+	RK8XX_REG_BIT(RK806_POWER_SLP_EN2, 2),
+	RK8XX_REG_BIT(RK806_POWER_SLP_EN2, 3),
+	RK8XX_REG_BIT(RK806_POWER_SLP_EN2, 4),
+	RK8XX_REG_BIT(RK806_POWER_SLP_EN2, 5),
+	RK8XX_REG_BIT(RK806_POWER_SLP_EN2, 0),
+};
+
+static int rk806_set_suspend_enable(struct regulator_dev *rdev)
+{
+	int rid = rdev_get_id(rdev);
+
+	return regmap_update_bits(rdev->regmap, rk806_suspend_bits[rid].reg,
+				  rk806_suspend_bits[rid].bit,
+				  rk806_suspend_bits[rid].bit);
+}
+
+static int rk806_set_suspend_disable(struct regulator_dev *rdev)
+{
+	int rid = rdev_get_id(rdev);
+
+	return regmap_update_bits(rdev->regmap, rk806_suspend_bits[rid].reg,
+				  rk806_suspend_bits[rid].bit, 0);
+}
+
 static int rk808_set_suspend_enable(struct regulator_dev *rdev)
 {
 	unsigned int reg;
@@ -561,6 +777,64 @@ static const struct regulator_ops rk805_switch_ops = {
 	.set_suspend_disable    = rk805_set_suspend_disable,
 };
 
+static const struct regulator_ops rk806_ops_dcdc = {
+	.list_voltage		= regulator_list_voltage_linear_range,
+	.map_voltage		= regulator_map_voltage_linear_range,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel        = regulator_set_voltage_sel_regmap,
+	.set_voltage_time_sel	= regulator_set_voltage_time_sel,
+	.set_mode		= rk806_set_mode_dcdc,
+	.get_mode		= rk806_get_mode_dcdc,
+
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.is_enabled		= rk8xx_is_enabled_wmsk_regmap,
+
+	.set_suspend_mode	= rk806_set_mode_dcdc,
+	.set_ramp_delay		= rk806_set_ramp_delay_dcdc,
+
+	.set_suspend_voltage	= rk806_set_suspend_voltage_range_dcdc,
+	.set_suspend_enable	= rk806_set_suspend_enable,
+	.set_suspend_disable	= rk806_set_suspend_disable,
+};
+
+static const struct regulator_ops rk806_ops_nldo = {
+	.list_voltage		= regulator_list_voltage_linear_range,
+	.map_voltage		= regulator_map_voltage_linear_range,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel        = regulator_set_voltage_sel_regmap,
+	.set_voltage_time_sel	= regulator_set_voltage_time_sel,
+
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.is_enabled		= regulator_is_enabled_regmap,
+
+	.set_ramp_delay		= regulator_set_ramp_delay_regmap,
+
+	.set_suspend_voltage	= rk806_set_suspend_voltage_range_nldo,
+	.set_suspend_enable	= rk806_set_suspend_enable,
+	.set_suspend_disable	= rk806_set_suspend_disable,
+};
+
+static const struct regulator_ops rk806_ops_pldo = {
+	.list_voltage		= regulator_list_voltage_linear_range,
+	.map_voltage		= regulator_map_voltage_linear_range,
+
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel        = regulator_set_voltage_sel_regmap,
+	.set_voltage_time_sel	= regulator_set_voltage_time_sel,
+
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.is_enabled		= regulator_is_enabled_regmap,
+
+	.set_ramp_delay		= regulator_set_ramp_delay_regmap,
+
+	.set_suspend_voltage	= rk806_set_suspend_voltage_range_pldo,
+	.set_suspend_enable	= rk806_set_suspend_enable,
+	.set_suspend_disable	= rk806_set_suspend_disable,
+};
+
 static const struct regulator_ops rk808_buck1_2_ops = {
 	.list_voltage		= regulator_list_voltage_linear,
 	.map_voltage		= regulator_map_voltage_linear,
@@ -743,6 +1017,112 @@ static const struct regulator_desc rk805_reg[] = {
 		BIT(2), 400),
 };
 
+static const struct linear_range rk806_buck_voltage_ranges[] = {
+	REGULATOR_LINEAR_RANGE(500000, 0, 160, 6250), /* 500mV ~ 1500mV */
+	REGULATOR_LINEAR_RANGE(1500000, 161, 237, 25000), /* 1500mV ~ 3400mV */
+	REGULATOR_LINEAR_RANGE(3400000, 238, 255, 0),
+};
+
+static const struct linear_range rk806_ldo_voltage_ranges[] = {
+	REGULATOR_LINEAR_RANGE(500000, 0, 232, 12500), /* 500mV ~ 3400mV */
+	REGULATOR_LINEAR_RANGE(3400000, 233, 255, 0), /* 500mV ~ 3400mV */
+};
+
+static const struct regulator_desc rk806_reg[] = {
+	RK806_REGULATOR("dcdc-reg1", "vcc1", RK806_ID_DCDC1, rk806_ops_dcdc,
+			RK806_BUCK_SEL_CNT, RK806_BUCK1_ON_VSEL,
+			RK806_POWER_EN0, rk806_buck_voltage_ranges, 0,
+			RK806_BUCK1_CONFIG, 0xc0, rk806_ramp_delay_table_dcdc),
+	RK806_REGULATOR("dcdc-reg2", "vcc2", RK806_ID_DCDC2, rk806_ops_dcdc,
+			RK806_BUCK_SEL_CNT, RK806_BUCK2_ON_VSEL,
+			RK806_POWER_EN0, rk806_buck_voltage_ranges, 1,
+			RK806_BUCK2_CONFIG, 0xc0, rk806_ramp_delay_table_dcdc),
+	RK806_REGULATOR("dcdc-reg3", "vcc3", RK806_ID_DCDC3, rk806_ops_dcdc,
+			RK806_BUCK_SEL_CNT, RK806_BUCK3_ON_VSEL,
+			RK806_POWER_EN0, rk806_buck_voltage_ranges, 2,
+			RK806_BUCK3_CONFIG, 0xc0, rk806_ramp_delay_table_dcdc),
+	RK806_REGULATOR("dcdc-reg4", "vcc4", RK806_ID_DCDC4, rk806_ops_dcdc,
+			RK806_BUCK_SEL_CNT, RK806_BUCK4_ON_VSEL,
+			RK806_POWER_EN0, rk806_buck_voltage_ranges, 3,
+			RK806_BUCK4_CONFIG, 0xc0, rk806_ramp_delay_table_dcdc),
+
+	RK806_REGULATOR("dcdc-reg5", "vcc5", RK806_ID_DCDC5, rk806_ops_dcdc,
+			RK806_BUCK_SEL_CNT, RK806_BUCK5_ON_VSEL,
+			RK806_POWER_EN1, rk806_buck_voltage_ranges, 0,
+			RK806_BUCK5_CONFIG, 0xc0, rk806_ramp_delay_table_dcdc),
+	RK806_REGULATOR("dcdc-reg6", "vcc6", RK806_ID_DCDC6, rk806_ops_dcdc,
+			RK806_BUCK_SEL_CNT, RK806_BUCK6_ON_VSEL,
+			RK806_POWER_EN1, rk806_buck_voltage_ranges, 1,
+			RK806_BUCK6_CONFIG, 0xc0, rk806_ramp_delay_table_dcdc),
+	RK806_REGULATOR("dcdc-reg7", "vcc7", RK806_ID_DCDC7, rk806_ops_dcdc,
+			RK806_BUCK_SEL_CNT, RK806_BUCK7_ON_VSEL,
+			RK806_POWER_EN1, rk806_buck_voltage_ranges, 2,
+			RK806_BUCK7_CONFIG, 0xc0, rk806_ramp_delay_table_dcdc),
+	RK806_REGULATOR("dcdc-reg8", "vcc8", RK806_ID_DCDC8, rk806_ops_dcdc,
+			RK806_BUCK_SEL_CNT, RK806_BUCK8_ON_VSEL,
+			RK806_POWER_EN1, rk806_buck_voltage_ranges, 3,
+			RK806_BUCK8_CONFIG, 0xc0, rk806_ramp_delay_table_dcdc),
+
+	RK806_REGULATOR("dcdc-reg9", "vcc9", RK806_ID_DCDC9, rk806_ops_dcdc,
+			RK806_BUCK_SEL_CNT, RK806_BUCK9_ON_VSEL,
+			RK806_POWER_EN2, rk806_buck_voltage_ranges, 0,
+			RK806_BUCK9_CONFIG, 0xc0, rk806_ramp_delay_table_dcdc),
+	RK806_REGULATOR("dcdc-reg10", "vcc10", RK806_ID_DCDC10, rk806_ops_dcdc,
+			RK806_BUCK_SEL_CNT, RK806_BUCK10_ON_VSEL,
+			RK806_POWER_EN2, rk806_buck_voltage_ranges, 1,
+			RK806_BUCK10_CONFIG, 0xc0, rk806_ramp_delay_table_dcdc),
+
+	RK806_REGULATOR("nldo-reg1", "vcc13", RK806_ID_NLDO1, rk806_ops_nldo,
+			RK806_LDO_SEL_CNT, RK806_NLDO1_ON_VSEL,
+			RK806_POWER_EN3, rk806_ldo_voltage_ranges, 0,
+			0xEA, 0x38, rk806_ramp_delay_table_ldo),
+	RK806_REGULATOR("nldo-reg2", "vcc13", RK806_ID_NLDO2, rk806_ops_nldo,
+			RK806_LDO_SEL_CNT, RK806_NLDO2_ON_VSEL,
+			RK806_POWER_EN3, rk806_ldo_voltage_ranges, 1,
+			0xEA, 0x38, rk806_ramp_delay_table_ldo),
+	RK806_REGULATOR("nldo-reg3", "vcc13", RK806_ID_NLDO3, rk806_ops_nldo,
+			RK806_LDO_SEL_CNT, RK806_NLDO3_ON_VSEL,
+			RK806_POWER_EN3, rk806_ldo_voltage_ranges, 2,
+			0xEA, 0x38, rk806_ramp_delay_table_ldo),
+	RK806_REGULATOR("nldo-reg4", "vcc14", RK806_ID_NLDO4, rk806_ops_nldo,
+			RK806_LDO_SEL_CNT, RK806_NLDO4_ON_VSEL,
+			RK806_POWER_EN3, rk806_ldo_voltage_ranges, 3,
+			0xEA, 0x38, rk806_ramp_delay_table_ldo),
+
+	RK806_REGULATOR("nldo-reg5", "vcc14", RK806_ID_NLDO5, rk806_ops_nldo,
+			RK806_LDO_SEL_CNT, RK806_NLDO5_ON_VSEL,
+			RK806_POWER_EN5, rk806_ldo_voltage_ranges, 2,
+			0xEA, 0x38, rk806_ramp_delay_table_ldo),
+
+	RK806_REGULATOR("pldo-reg1", "vcc11", RK806_ID_PLDO1, rk806_ops_pldo,
+			RK806_LDO_SEL_CNT, RK806_PLDO1_ON_VSEL,
+			RK806_POWER_EN4, rk806_ldo_voltage_ranges, 1,
+			0xEA, 0x38, rk806_ramp_delay_table_ldo),
+	RK806_REGULATOR("pldo-reg2", "vcc11", RK806_ID_PLDO2, rk806_ops_pldo,
+			RK806_LDO_SEL_CNT, RK806_PLDO2_ON_VSEL,
+			RK806_POWER_EN4, rk806_ldo_voltage_ranges, 2,
+			0xEA, 0x38, rk806_ramp_delay_table_ldo),
+	RK806_REGULATOR("pldo-reg3", "vcc11", RK806_ID_PLDO3, rk806_ops_pldo,
+			RK806_LDO_SEL_CNT, RK806_PLDO3_ON_VSEL,
+			RK806_POWER_EN4, rk806_ldo_voltage_ranges, 3,
+			0xEA, 0x38, rk806_ramp_delay_table_ldo),
+
+	RK806_REGULATOR("pldo-reg4", "vcc12", RK806_ID_PLDO4, rk806_ops_pldo,
+			RK806_LDO_SEL_CNT, RK806_PLDO4_ON_VSEL,
+			RK806_POWER_EN5, rk806_ldo_voltage_ranges, 0,
+			0xEA, 0x38, rk806_ramp_delay_table_ldo),
+	RK806_REGULATOR("pldo-reg5", "vcc12", RK806_ID_PLDO5, rk806_ops_pldo,
+			RK806_LDO_SEL_CNT, RK806_PLDO5_ON_VSEL,
+			RK806_POWER_EN5, rk806_ldo_voltage_ranges, 1,
+			0xEA, 0x38, rk806_ramp_delay_table_ldo),
+
+	RK806_REGULATOR("pldo-reg6", "vcca", RK806_ID_PLDO6, rk806_ops_pldo,
+			RK806_LDO_SEL_CNT, RK806_PLDO6_ON_VSEL,
+			RK806_POWER_EN4, rk806_ldo_voltage_ranges, 0,
+			0xEA, 0x38, rk806_ramp_delay_table_ldo),
+};
+
+
 static const struct regulator_desc rk808_reg[] = {
 	{
 		.name = "DCDC_REG1",
@@ -1313,6 +1693,10 @@ static int rk808_regulator_probe(struct platform_device *pdev)
 		regulators = rk805_reg;
 		nregulators = RK805_NUM_REGULATORS;
 		break;
+	case RK806_ID:
+		regulators = rk806_reg;
+		nregulators = ARRAY_SIZE(rk806_reg);
+		break;
 	case RK808_ID:
 		regulators = rk808_reg;
 		nregulators = RK808_NUM_REGULATORS;
@@ -1366,5 +1750,6 @@ MODULE_AUTHOR("Tony xie <tony.xie@rock-chips.com>");
 MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
 MODULE_AUTHOR("Zhang Qing <zhangqing@rock-chips.com>");
 MODULE_AUTHOR("Wadim Egorov <w.egorov@phytec.de>");
+MODULE_AUTHOR("Xu Shengfei <xsf@rock-chips.com>");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:rk808-regulator");
-- 
2.39.2


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

^ permalink raw reply related	[flat|nested] 35+ messages in thread

* Re: [PATCH v8 01/14] clk: RK808: reduce 'struct rk808' usage
  2023-05-04 17:36 ` [PATCH v8 01/14] clk: RK808: reduce 'struct rk808' usage Sebastian Reichel
@ 2023-05-15 15:14   ` Lee Jones
  0 siblings, 0 replies; 35+ messages in thread
From: Lee Jones @ 2023-05-15 15:14 UTC (permalink / raw)
  To: Sebastian Reichel
  Cc: Heiko Stuebner, Rob Herring, Krzysztof Kozlowski,
	Michael Turquette, Stephen Boyd, Linus Walleij, Mark Brown,
	Liam Girdwood, Alexandre Belloni, Alessandro Zummo,
	linux-rockchip, devicetree, linux-kernel, kernel,
	Diederik de Haas, Vincent Legoll

On Thu, 04 May 2023, Sebastian Reichel wrote:

> Reduce usage of 'struct rk808' (driver data of the parent MFD), so
> that only the chip variant field is still being accessed directly.
> This allows restructuring the MFD driver to support SPI based
> PMICs.
> 
> Acked-by: Stephen Boyd <sboyd@kernel.org>
> Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, Quartz64 Model A + B
> Tested-by: Vincent Legoll <vincent.legoll@gmail.com> # Pine64 QuartzPro64
> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
> ---
>  drivers/clk/clk-rk808.c | 34 ++++++++++++++++------------------
>  1 file changed, 16 insertions(+), 18 deletions(-)

Applied, thanks

-- 
Lee Jones [李琼斯]

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

^ permalink raw reply	[flat|nested] 35+ messages in thread

* Re: [PATCH v8 02/14] mfd: rk808: convert to device managed resources
  2023-05-04 17:36 ` [PATCH v8 02/14] mfd: rk808: convert to device managed resources Sebastian Reichel
@ 2023-05-15 15:17   ` Lee Jones
  0 siblings, 0 replies; 35+ messages in thread
From: Lee Jones @ 2023-05-15 15:17 UTC (permalink / raw)
  To: Sebastian Reichel
  Cc: Heiko Stuebner, Rob Herring, Krzysztof Kozlowski,
	Michael Turquette, Stephen Boyd, Linus Walleij, Mark Brown,
	Liam Girdwood, Alexandre Belloni, Alessandro Zummo,
	linux-rockchip, devicetree, linux-kernel, kernel,
	Diederik de Haas, Vincent Legoll

On Thu, 04 May 2023, Sebastian Reichel wrote:

> Fully convert the driver to device managed resources.
> 
> Acked-for-MFD-by: Lee Jones <lee@kernel.org>
> Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, Quartz64 Model A + B
> Tested-by: Vincent Legoll <vincent.legoll@gmail.com> # Pine64 QuartzPro64
> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
> ---
>  drivers/mfd/rk808.c | 64 ++++++++++++++++-----------------------------
>  1 file changed, 22 insertions(+), 42 deletions(-)

Applied, thanks

-- 
Lee Jones [李琼斯]

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

^ permalink raw reply	[flat|nested] 35+ messages in thread

* Re: [PATCH v8 03/14] mfd: rk808: use dev_err_probe
  2023-05-04 17:36 ` [PATCH v8 03/14] mfd: rk808: use dev_err_probe Sebastian Reichel
@ 2023-05-15 15:18   ` Lee Jones
  0 siblings, 0 replies; 35+ messages in thread
From: Lee Jones @ 2023-05-15 15:18 UTC (permalink / raw)
  To: Sebastian Reichel
  Cc: Heiko Stuebner, Rob Herring, Krzysztof Kozlowski,
	Michael Turquette, Stephen Boyd, Linus Walleij, Mark Brown,
	Liam Girdwood, Alexandre Belloni, Alessandro Zummo,
	linux-rockchip, devicetree, linux-kernel, kernel,
	Diederik de Haas, Vincent Legoll

On Thu, 04 May 2023, Sebastian Reichel wrote:

> Use dev_err_probe instead of dev_err in probe function,
> which simplifies code a little bit and prints the error
> code.
> 
> Also drop possibly incorrect printing of chip id registers
> while touching the error message.
> 
> Acked-for-MFD-by: Lee Jones <lee@kernel.org>
> Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, Quartz64 Model A + B
> Tested-by: Vincent Legoll <vincent.legoll@gmail.com> # Pine64 QuartzPro64
> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
> ---
>  drivers/mfd/rk808.c | 48 +++++++++++++++------------------------------
>  1 file changed, 16 insertions(+), 32 deletions(-)

Applied, thanks

-- 
Lee Jones [李琼斯]

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

^ permalink raw reply	[flat|nested] 35+ messages in thread

* Re: [PATCH v8 04/14] mfd: rk808: replace 'struct i2c_client' with 'struct device'
  2023-05-04 17:36 ` [PATCH v8 04/14] mfd: rk808: replace 'struct i2c_client' with 'struct device' Sebastian Reichel
@ 2023-05-15 15:18   ` Lee Jones
  0 siblings, 0 replies; 35+ messages in thread
From: Lee Jones @ 2023-05-15 15:18 UTC (permalink / raw)
  To: Sebastian Reichel
  Cc: Heiko Stuebner, Rob Herring, Krzysztof Kozlowski,
	Michael Turquette, Stephen Boyd, Linus Walleij, Mark Brown,
	Liam Girdwood, Alexandre Belloni, Alessandro Zummo,
	linux-rockchip, devicetree, linux-kernel, kernel,
	Diederik de Haas, Vincent Legoll

On Thu, 04 May 2023, Sebastian Reichel wrote:

> Put 'struct device' pointer into the MFD platform_data instead
> of the 'struct i2c_client' pointer. This simplifies the code
> and prepares the MFD for SPI support.
> 
> Acked-for-MFD-by: Lee Jones <lee@kernel.org>
> Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, Quartz64 Model A + B
> Tested-by: Vincent Legoll <vincent.legoll@gmail.com> # Pine64 QuartzPro64
> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
> ---
>  drivers/mfd/rk808.c       | 6 +++---
>  include/linux/mfd/rk808.h | 2 +-
>  2 files changed, 4 insertions(+), 4 deletions(-)

Applied, thanks

-- 
Lee Jones [李琼斯]

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

^ permalink raw reply	[flat|nested] 35+ messages in thread

* Re: [PATCH v8 05/14] mfd: rk808: split into core and i2c
  2023-05-04 17:36 ` [PATCH v8 05/14] mfd: rk808: split into core and i2c Sebastian Reichel
@ 2023-05-15 15:19   ` Lee Jones
       [not found]   ` <CGME20230516212700eucas1p1fbde1b6181c18d821e0796b6b6a4fa00@eucas1p1.samsung.com>
  2023-06-30 11:34   ` Geert Uytterhoeven
  2 siblings, 0 replies; 35+ messages in thread
From: Lee Jones @ 2023-05-15 15:19 UTC (permalink / raw)
  To: Sebastian Reichel
  Cc: Heiko Stuebner, Rob Herring, Krzysztof Kozlowski,
	Michael Turquette, Stephen Boyd, Linus Walleij, Mark Brown,
	Liam Girdwood, Alexandre Belloni, Alessandro Zummo,
	linux-rockchip, devicetree, linux-kernel, kernel,
	Diederik de Haas, Vincent Legoll

On Thu, 04 May 2023, Sebastian Reichel wrote:

> Split rk808 into a core and an i2c part in preparation for
> SPI support.
> 
> Acked-for-MFD-by: Lee Jones <lee@kernel.org>
> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> # for RTC
> Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, Quartz64 Model A + B
> Tested-by: Vincent Legoll <vincent.legoll@gmail.com> # Pine64 QuartzPro64
> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
> ---
>  drivers/clk/Kconfig                   |   2 +-
>  drivers/input/misc/Kconfig            |   2 +-
>  drivers/mfd/Kconfig                   |   7 +-
>  drivers/mfd/Makefile                  |   3 +-
>  drivers/mfd/{rk808.c => rk8xx-core.c} | 209 +++++---------------------
>  drivers/mfd/rk8xx-i2c.c               | 200 ++++++++++++++++++++++++
>  drivers/pinctrl/Kconfig               |   2 +-
>  drivers/power/supply/Kconfig          |   2 +-
>  drivers/regulator/Kconfig             |   2 +-
>  drivers/rtc/Kconfig                   |   2 +-
>  include/linux/mfd/rk808.h             |   6 +
>  sound/soc/codecs/Kconfig              |   2 +-
>  12 files changed, 256 insertions(+), 183 deletions(-)
>  rename drivers/mfd/{rk808.c => rk8xx-core.c} (76%)
>  create mode 100644 drivers/mfd/rk8xx-i2c.c

Applied, thanks

-- 
Lee Jones [李琼斯]

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

^ permalink raw reply	[flat|nested] 35+ messages in thread

* Re: [PATCH v8 06/14] mfd: rk8xx-i2c: use device_get_match_data
  2023-05-04 17:36 ` [PATCH v8 06/14] mfd: rk8xx-i2c: use device_get_match_data Sebastian Reichel
@ 2023-05-15 15:19   ` Lee Jones
  0 siblings, 0 replies; 35+ messages in thread
From: Lee Jones @ 2023-05-15 15:19 UTC (permalink / raw)
  To: Sebastian Reichel
  Cc: Heiko Stuebner, Rob Herring, Krzysztof Kozlowski,
	Michael Turquette, Stephen Boyd, Linus Walleij, Mark Brown,
	Liam Girdwood, Alexandre Belloni, Alessandro Zummo,
	linux-rockchip, devicetree, linux-kernel, kernel,
	Diederik de Haas, Vincent Legoll

On Thu, 04 May 2023, Sebastian Reichel wrote:

> Simplify the device identification logic by supplying the relevant
> information via of_match_data. This also removes the dev_info()
> printing the chip version, since that's supplied by the match data
> now.
> 
> Due to lack of hardware this change is compile-tested only.
> 
> Acked-for-MFD-by: Lee Jones <lee@kernel.org>
> Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, Quartz64 Model A + B
> Tested-by: Vincent Legoll <vincent.legoll@gmail.com> # Pine64 QuartzPro64
> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
> ---
>  drivers/mfd/rk8xx-core.c |  2 -
>  drivers/mfd/rk8xx-i2c.c  | 89 +++++++++++++++++-----------------------
>  2 files changed, 37 insertions(+), 54 deletions(-)

Applied, thanks

-- 
Lee Jones [李琼斯]

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

^ permalink raw reply	[flat|nested] 35+ messages in thread

* Re: [PATCH v8 07/14] dt-bindings: mfd: add rk806 binding
  2023-05-04 17:36 ` [PATCH v8 07/14] dt-bindings: mfd: add rk806 binding Sebastian Reichel
@ 2023-05-15 15:20   ` Lee Jones
  0 siblings, 0 replies; 35+ messages in thread
From: Lee Jones @ 2023-05-15 15:20 UTC (permalink / raw)
  To: Sebastian Reichel
  Cc: Heiko Stuebner, Rob Herring, Krzysztof Kozlowski,
	Michael Turquette, Stephen Boyd, Linus Walleij, Mark Brown,
	Liam Girdwood, Alexandre Belloni, Alessandro Zummo,
	linux-rockchip, devicetree, linux-kernel, kernel, Rob Herring

On Thu, 04 May 2023, Sebastian Reichel wrote:

> Add DT binding document for Rockchip's RK806 PMIC.
> 
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
> ---
>  .../bindings/mfd/rockchip,rk806.yaml          | 406 ++++++++++++++++++
>  1 file changed, 406 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/rockchip,rk806.yaml

Applied, thanks

-- 
Lee Jones [李琼斯]

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

^ permalink raw reply	[flat|nested] 35+ messages in thread

* Re: [PATCH v8 08/14] mfd: rk8xx: add rk806 support
  2023-05-04 17:36 ` [PATCH v8 08/14] mfd: rk8xx: add rk806 support Sebastian Reichel
@ 2023-05-15 15:20   ` Lee Jones
  2023-11-15 17:17   ` Neil Armstrong
  1 sibling, 0 replies; 35+ messages in thread
From: Lee Jones @ 2023-05-15 15:20 UTC (permalink / raw)
  To: Sebastian Reichel
  Cc: Heiko Stuebner, Rob Herring, Krzysztof Kozlowski,
	Michael Turquette, Stephen Boyd, Linus Walleij, Mark Brown,
	Liam Girdwood, Alexandre Belloni, Alessandro Zummo,
	linux-rockchip, devicetree, linux-kernel, kernel,
	Diederik de Haas, Vincent Legoll

On Thu, 04 May 2023, Sebastian Reichel wrote:

> Add support for SPI connected rk806, which is used by the RK3588
> evaluation boards. The PMIC is advertised to support I2C and SPI,
> but the evaluation boards all use SPI. Thus only SPI support is
> added here.
> 
> Acked-for-MFD-by: Lee Jones <lee@kernel.org>
> Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, Quartz64 Model A + B
> Tested-by: Vincent Legoll <vincent.legoll@gmail.com> # Pine64 QuartzPro64
> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
> ---
>  drivers/mfd/Kconfig       |  14 ++
>  drivers/mfd/Makefile      |   1 +
>  drivers/mfd/rk8xx-core.c  |  69 ++++++-
>  drivers/mfd/rk8xx-spi.c   | 124 ++++++++++++
>  include/linux/mfd/rk808.h | 409 ++++++++++++++++++++++++++++++++++++++
>  5 files changed, 614 insertions(+), 3 deletions(-)
>  create mode 100644 drivers/mfd/rk8xx-spi.c

Applied, thanks

-- 
Lee Jones [李琼斯]

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

^ permalink raw reply	[flat|nested] 35+ messages in thread

* Re: [PATCH v8 09/14] pinctrl: rk805: add rk806 pinctrl support
  2023-05-04 17:36 ` [PATCH v8 09/14] pinctrl: rk805: add rk806 pinctrl support Sebastian Reichel
@ 2023-05-15 15:21   ` Lee Jones
  0 siblings, 0 replies; 35+ messages in thread
From: Lee Jones @ 2023-05-15 15:21 UTC (permalink / raw)
  To: Sebastian Reichel
  Cc: Heiko Stuebner, Rob Herring, Krzysztof Kozlowski,
	Michael Turquette, Stephen Boyd, Linus Walleij, Mark Brown,
	Liam Girdwood, Alexandre Belloni, Alessandro Zummo,
	linux-rockchip, devicetree, linux-kernel, kernel, shengfei Xu,
	Diederik de Haas, Vincent Legoll

On Thu, 04 May 2023, Sebastian Reichel wrote:

> Add support for rk806 dvs pinctrl to the existing rk805
> driver.
> 
> This has been implemented using shengfei Xu's rk806
> specific driver from the vendor tree as reference.
> 
> Co-developed-by: shengfei Xu <xsf@rock-chips.com>
> Signed-off-by: shengfei Xu <xsf@rock-chips.com>
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
> Acked-by: Linus Walleij <linus.walleij@linaro.org>
> Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, Quartz64 Model A + B
> Tested-by: Vincent Legoll <vincent.legoll@gmail.com> # Pine64 QuartzPro64
> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
> ---
>  drivers/pinctrl/pinctrl-rk805.c | 189 ++++++++++++++++++++++++++++----
>  1 file changed, 168 insertions(+), 21 deletions(-)

Applied, thanks

-- 
Lee Jones [李琼斯]

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

^ permalink raw reply	[flat|nested] 35+ messages in thread

* [GIT PULL] Immutable branch between MFD, Clk, Input, Pinctrl, RTC, Power, Regulator and Sound due for the v6.5 merge window
  2023-05-04 17:36 [PATCH v8 00/14] mfd/pinctrl/regulator: Add RK806 Support Sebastian Reichel
                   ` (13 preceding siblings ...)
  2023-05-04 17:36 ` [PATCH v8 14/14] regulator: rk808: add rk806 support Sebastian Reichel
@ 2023-05-15 15:24 ` Lee Jones
  2023-05-23 21:44 ` (subset) [PATCH v8 00/14] mfd/pinctrl/regulator: Add RK806 Support Mark Brown
  15 siblings, 0 replies; 35+ messages in thread
From: Lee Jones @ 2023-05-15 15:24 UTC (permalink / raw)
  To: Sebastian Reichel
  Cc: Heiko Stuebner, Rob Herring, Krzysztof Kozlowski,
	Michael Turquette, Stephen Boyd, Linus Walleij, Mark Brown,
	Liam Girdwood, Alexandre Belloni, Alessandro Zummo,
	linux-rockchip, devicetree, linux-kernel, kernel

Enjoy!

The following changes since commit ac9a78681b921877518763ba0e89202254349d1b:

  Linux 6.4-rc1 (2023-05-07 13:34:35 -0700)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git tb-mfd-clk-input-pinctrl-power-rtc-sound-v6.5

for you to fetch changes up to 924764aa5f2e705f46f548611e6a9d6b986ae880:

  pinctrl: rk805: Add rk806 pinctrl support (2023-05-15 16:21:01 +0100)

----------------------------------------------------------------
Immutable branch between MFD, Clk, Input, Pinctrl, RTC, Power, Regulator and Sound due for the v6.5 merge window

----------------------------------------------------------------
Sebastian Reichel (9):
      clk: RK808: Reduce 'struct rk808' usage
      mfd: rk808: Convert to device managed resources
      mfd: rk808: Use dev_err_probe
      mfd: rk808: Replace 'struct i2c_client' with 'struct device'
      mfd: rk808: Split into core and i2c
      mfd: rk8xx-i2c: Use device_get_match_data
      dt-bindings: mfd: Add rk806 binding
      mfd: rk8xx: Add rk806 support
      pinctrl: rk805: Add rk806 pinctrl support

 .../devicetree/bindings/mfd/rockchip,rk806.yaml    | 406 ++++++++++++++++++++
 drivers/clk/Kconfig                                |   2 +-
 drivers/clk/clk-rk808.c                            |  34 +-
 drivers/input/misc/Kconfig                         |   2 +-
 drivers/mfd/Kconfig                                |  21 +-
 drivers/mfd/Makefile                               |   4 +-
 drivers/mfd/{rk808.c => rk8xx-core.c}              | 352 ++++++-----------
 drivers/mfd/rk8xx-i2c.c                            | 185 +++++++++
 drivers/mfd/rk8xx-spi.c                            | 124 ++++++
 drivers/pinctrl/Kconfig                            |   2 +-
 drivers/pinctrl/pinctrl-rk805.c                    | 189 ++++++++--
 drivers/power/supply/Kconfig                       |   2 +-
 drivers/regulator/Kconfig                          |   2 +-
 drivers/rtc/Kconfig                                |   2 +-
 include/linux/mfd/rk808.h                          | 417 ++++++++++++++++++++-
 sound/soc/codecs/Kconfig                           |   2 +-
 16 files changed, 1464 insertions(+), 282 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mfd/rockchip,rk806.yaml
 rename drivers/mfd/{rk808.c => rk8xx-core.c} (71%)
 create mode 100644 drivers/mfd/rk8xx-i2c.c
 create mode 100644 drivers/mfd/rk8xx-spi.c

-- 
Lee Jones [李琼斯]

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

^ permalink raw reply	[flat|nested] 35+ messages in thread

* Re: [PATCH v8 05/14] mfd: rk808: split into core and i2c
       [not found]   ` <CGME20230516212700eucas1p1fbde1b6181c18d821e0796b6b6a4fa00@eucas1p1.samsung.com>
@ 2023-05-16 21:26     ` Marek Szyprowski
  2023-05-16 22:01       ` Sebastian Reichel
  0 siblings, 1 reply; 35+ messages in thread
From: Marek Szyprowski @ 2023-05-16 21:26 UTC (permalink / raw)
  To: Sebastian Reichel, Heiko Stuebner, Rob Herring,
	Krzysztof Kozlowski, Lee Jones
  Cc: Michael Turquette, Stephen Boyd, Linus Walleij, Mark Brown,
	Liam Girdwood, Alexandre Belloni, Alessandro Zummo,
	linux-rockchip, devicetree, linux-kernel, kernel,
	Diederik de Haas, Vincent Legoll

Hi,

On 04.05.2023 19:36, Sebastian Reichel wrote:
> Split rk808 into a core and an i2c part in preparation for
> SPI support.
>
> Acked-for-MFD-by: Lee Jones <lee@kernel.org>
> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> # for RTC
> Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, Quartz64 Model A + B
> Tested-by: Vincent Legoll <vincent.legoll@gmail.com> # Pine64 QuartzPro64
> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

This patch landed in today's linux-next as commit c20e8c5b1203 ("mfd: 
rk808: Split into core and i2c"). Unfortunately some boards (for example 
Hardkernel's Odroid-M1) stopped to boot after this change. This is 
caused by the lack of updating the related defconfigs. Could you please 
add a patch that updates the MFD_RK808 entries to MFD_RK8XX_I2C in the 
following files:

$ git grep MFD_RK808
arch/arm/configs/multi_v7_defconfig:CONFIG_MFD_RK808=y
arch/arm64/configs/defconfig:CONFIG_MFD_RK808=y


> ---
>   drivers/clk/Kconfig                   |   2 +-
>   drivers/input/misc/Kconfig            |   2 +-
>   drivers/mfd/Kconfig                   |   7 +-
>   drivers/mfd/Makefile                  |   3 +-
>   drivers/mfd/{rk808.c => rk8xx-core.c} | 209 +++++---------------------
>   drivers/mfd/rk8xx-i2c.c               | 200 ++++++++++++++++++++++++
>   drivers/pinctrl/Kconfig               |   2 +-
>   drivers/power/supply/Kconfig          |   2 +-
>   drivers/regulator/Kconfig             |   2 +-
>   drivers/rtc/Kconfig                   |   2 +-
>   include/linux/mfd/rk808.h             |   6 +
>   sound/soc/codecs/Kconfig              |   2 +-
>   12 files changed, 256 insertions(+), 183 deletions(-)
>   rename drivers/mfd/{rk808.c => rk8xx-core.c} (76%)
>   create mode 100644 drivers/mfd/rk8xx-i2c.c
>
> ...

Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

^ permalink raw reply	[flat|nested] 35+ messages in thread

* Re: [PATCH v8 05/14] mfd: rk808: split into core and i2c
  2023-05-16 21:26     ` Marek Szyprowski
@ 2023-05-16 22:01       ` Sebastian Reichel
  0 siblings, 0 replies; 35+ messages in thread
From: Sebastian Reichel @ 2023-05-16 22:01 UTC (permalink / raw)
  To: Marek Szyprowski
  Cc: Heiko Stuebner, Rob Herring, Krzysztof Kozlowski, Lee Jones,
	Michael Turquette, Stephen Boyd, Linus Walleij, Mark Brown,
	Liam Girdwood, Alexandre Belloni, Alessandro Zummo,
	linux-rockchip, devicetree, linux-kernel, kernel,
	Diederik de Haas, Vincent Legoll


[-- Attachment #1.1: Type: text/plain, Size: 2239 bytes --]

Hello Marek,

On Tue, May 16, 2023 at 11:26:59PM +0200, Marek Szyprowski wrote:
> Hi,
> 
> On 04.05.2023 19:36, Sebastian Reichel wrote:
> > Split rk808 into a core and an i2c part in preparation for
> > SPI support.
> >
> > Acked-for-MFD-by: Lee Jones <lee@kernel.org>
> > Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> # for RTC
> > Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, Quartz64 Model A + B
> > Tested-by: Vincent Legoll <vincent.legoll@gmail.com> # Pine64 QuartzPro64
> > Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
> 
> This patch landed in today's linux-next as commit c20e8c5b1203 ("mfd: 
> rk808: Split into core and i2c"). Unfortunately some boards (for example 
> Hardkernel's Odroid-M1) stopped to boot after this change. This is 
> caused by the lack of updating the related defconfigs. Could you please 
> add a patch that updates the MFD_RK808 entries to MFD_RK8XX_I2C in the 
> following files:
> 
> $ git grep MFD_RK808
> arch/arm/configs/multi_v7_defconfig:CONFIG_MFD_RK808=y
> arch/arm64/configs/defconfig:CONFIG_MFD_RK808=y

Sure, I will prepare a patch for each of them. Thanks for the quick
report and sorry for the inconvenience.

-- Sebastian

> 
> 
> > ---
> >   drivers/clk/Kconfig                   |   2 +-
> >   drivers/input/misc/Kconfig            |   2 +-
> >   drivers/mfd/Kconfig                   |   7 +-
> >   drivers/mfd/Makefile                  |   3 +-
> >   drivers/mfd/{rk808.c => rk8xx-core.c} | 209 +++++---------------------
> >   drivers/mfd/rk8xx-i2c.c               | 200 ++++++++++++++++++++++++
> >   drivers/pinctrl/Kconfig               |   2 +-
> >   drivers/power/supply/Kconfig          |   2 +-
> >   drivers/regulator/Kconfig             |   2 +-
> >   drivers/rtc/Kconfig                   |   2 +-
> >   include/linux/mfd/rk808.h             |   6 +
> >   sound/soc/codecs/Kconfig              |   2 +-
> >   12 files changed, 256 insertions(+), 183 deletions(-)
> >   rename drivers/mfd/{rk808.c => rk8xx-core.c} (76%)
> >   create mode 100644 drivers/mfd/rk8xx-i2c.c
> >
> > ...
> 
> Best regards
> -- 
> Marek Szyprowski, PhD
> Samsung R&D Institute Poland
> 

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[-- Attachment #2: Type: text/plain, Size: 170 bytes --]

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

^ permalink raw reply	[flat|nested] 35+ messages in thread

* Re: (subset) [PATCH v8 00/14] mfd/pinctrl/regulator: Add RK806 Support
  2023-05-04 17:36 [PATCH v8 00/14] mfd/pinctrl/regulator: Add RK806 Support Sebastian Reichel
                   ` (14 preceding siblings ...)
  2023-05-15 15:24 ` [GIT PULL] Immutable branch between MFD, Clk, Input, Pinctrl, RTC, Power, Regulator and Sound due for the v6.5 merge window Lee Jones
@ 2023-05-23 21:44 ` Mark Brown
  15 siblings, 0 replies; 35+ messages in thread
From: Mark Brown @ 2023-05-23 21:44 UTC (permalink / raw)
  To: Heiko Stuebner, Rob Herring, Krzysztof Kozlowski, Lee Jones,
	Sebastian Reichel
  Cc: Michael Turquette, Stephen Boyd, Linus Walleij, Liam Girdwood,
	Alexandre Belloni, Alessandro Zummo, linux-rockchip, devicetree,
	linux-kernel, kernel

On Thu, 04 May 2023 19:36:04 +0200, Sebastian Reichel wrote:
> All existing boards using RK3588/RK3588s use RK806 PMICs. This series is now
> the main blocker for full upstream support of those boards and it would be good
> to have it merged for 6.5 :) The patches have been tested on multiple different
> platforms and are mainly missing an Ack from Mark or Liam for the rk808-regulator
> changes.
> 
> Merging must happen through a single tree, since the pinctrl and regulator
> drivers rely on the register definitions from the include file added by the MFD
> patch. My suggested merge strategy is that Lee creates an immutable branch for
> the regulator/pinctrl tree once all Acks have been collected.
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next

Thanks!

[10/14] regulator: expose regulator_find_closest_bigger
        commit: 431cb97b763133fba8b1c68c1ed089315f25e4dd
[11/14] regulator: rk808: fix asynchronous probing
        commit: 1b9e86d445a0f5c6d8dcbaf11508cb5dfb5848a8
[12/14] regulator: rk808: cleanup parent device usage
        commit: 5111c931f36cebe77d4ce66964c348e6eb4afca0
[13/14] regulator: rk808: revert to synchronous probing
        commit: 22a94021e7d2b456c6abb59ad0a7ce4e94933d4a
[14/14] regulator: rk808: add rk806 support
        commit: f991a220a44726c54c2332569a2a80bf074aa775

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

^ permalink raw reply	[flat|nested] 35+ messages in thread

* Re: [PATCH v8 05/14] mfd: rk808: split into core and i2c
  2023-05-04 17:36 ` [PATCH v8 05/14] mfd: rk808: split into core and i2c Sebastian Reichel
  2023-05-15 15:19   ` Lee Jones
       [not found]   ` <CGME20230516212700eucas1p1fbde1b6181c18d821e0796b6b6a4fa00@eucas1p1.samsung.com>
@ 2023-06-30 11:34   ` Geert Uytterhoeven
  2023-06-30 18:48     ` Sebastian Reichel
  2 siblings, 1 reply; 35+ messages in thread
From: Geert Uytterhoeven @ 2023-06-30 11:34 UTC (permalink / raw)
  To: Sebastian Reichel
  Cc: Heiko Stuebner, Rob Herring, Krzysztof Kozlowski, Lee Jones,
	Michael Turquette, Stephen Boyd, Linus Walleij, Mark Brown,
	Liam Girdwood, Alexandre Belloni, Alessandro Zummo,
	linux-rockchip, devicetree, linux-kernel, kernel,
	Diederik de Haas, Vincent Legoll

Hi Sebastian,

On Thu, May 4, 2023 at 7:38 PM Sebastian Reichel
<sebastian.reichel@collabora.com> wrote:
> Split rk808 into a core and an i2c part in preparation for
> SPI support.
>
> Acked-for-MFD-by: Lee Jones <lee@kernel.org>
> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> # for RTC
> Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, Quartz64 Model A + B
> Tested-by: Vincent Legoll <vincent.legoll@gmail.com> # Pine64 QuartzPro64
> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Thanks for your patch, which is now commit c20e8c5b1203af37 ("mfd:
rk808: Split into core and i2c") in linus/master stable/master

> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -1183,12 +1183,17 @@ config MFD_RC5T583
>           Additional drivers must be enabled in order to use the
>           different functionality of the device.
>
> -config MFD_RK808
> +config MFD_RK8XX
> +       bool

Is there any specific reason why this cannot be modular, like most (all?)
of its users that select it?

> +       select MFD_CORE
> +
> +config MFD_RK8XX_I2C
>         tristate "Rockchip RK805/RK808/RK809/RK817/RK818 Power Management Chip"
>         depends on I2C && OF
>         select MFD_CORE
>         select REGMAP_I2C
>         select REGMAP_IRQ
> +       select MFD_RK8XX
>         help
>           If you say yes here you get support for the RK805, RK808, RK809,
>           RK817 and RK818 Power Management chips.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

^ permalink raw reply	[flat|nested] 35+ messages in thread

* Re: [PATCH v8 05/14] mfd: rk808: split into core and i2c
  2023-06-30 11:34   ` Geert Uytterhoeven
@ 2023-06-30 18:48     ` Sebastian Reichel
  2023-07-04 13:08       ` Geert Uytterhoeven
  0 siblings, 1 reply; 35+ messages in thread
From: Sebastian Reichel @ 2023-06-30 18:48 UTC (permalink / raw)
  To: Geert Uytterhoeven
  Cc: Heiko Stuebner, Rob Herring, Krzysztof Kozlowski, Lee Jones,
	Michael Turquette, Stephen Boyd, Linus Walleij, Mark Brown,
	Liam Girdwood, Alexandre Belloni, Alessandro Zummo,
	linux-rockchip, devicetree, linux-kernel, kernel,
	Diederik de Haas, Vincent Legoll


[-- Attachment #1.1: Type: text/plain, Size: 718 bytes --]

Hi Geert,

On Fri, Jun 30, 2023 at 01:34:44PM +0200, Geert Uytterhoeven wrote:
> > --- a/drivers/mfd/Kconfig
> > +++ b/drivers/mfd/Kconfig
> > @@ -1183,12 +1183,17 @@ config MFD_RC5T583
> >           Additional drivers must be enabled in order to use the
> >           different functionality of the device.
> >
> > -config MFD_RK808
> > +config MFD_RK8XX
> > +       bool
> 
> Is there any specific reason why this cannot be modular, like most (all?)
> of its users that select it?

I don't remember why I made that bool. Tristate should be perfectly
fine. Do you want to send a patch (I will test it of course), or should
I take care of it?

Greetings and thanks for the report,

-- Sebastian

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[-- Attachment #2: Type: text/plain, Size: 170 bytes --]

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

^ permalink raw reply	[flat|nested] 35+ messages in thread

* Re: [PATCH v8 05/14] mfd: rk808: split into core and i2c
  2023-06-30 18:48     ` Sebastian Reichel
@ 2023-07-04 13:08       ` Geert Uytterhoeven
  0 siblings, 0 replies; 35+ messages in thread
From: Geert Uytterhoeven @ 2023-07-04 13:08 UTC (permalink / raw)
  To: Sebastian Reichel
  Cc: Heiko Stuebner, Rob Herring, Krzysztof Kozlowski, Lee Jones,
	Michael Turquette, Stephen Boyd, Linus Walleij, Mark Brown,
	Liam Girdwood, Alexandre Belloni, Alessandro Zummo,
	linux-rockchip, devicetree, linux-kernel, kernel,
	Diederik de Haas, Vincent Legoll

Hi Sebastian,

On Fri, Jun 30, 2023 at 8:48 PM Sebastian Reichel
<sebastian.reichel@collabora.com> wrote:
> On Fri, Jun 30, 2023 at 01:34:44PM +0200, Geert Uytterhoeven wrote:
> > > --- a/drivers/mfd/Kconfig
> > > +++ b/drivers/mfd/Kconfig
> > > @@ -1183,12 +1183,17 @@ config MFD_RC5T583
> > >           Additional drivers must be enabled in order to use the
> > >           different functionality of the device.
> > >
> > > -config MFD_RK808
> > > +config MFD_RK8XX
> > > +       bool
> >
> > Is there any specific reason why this cannot be modular, like most (all?)
> > of its users that select it?
>
> I don't remember why I made that bool. Tristate should be perfectly
> fine. Do you want to send a patch (I will test it of course), or should
> I take care of it?

I have sent a patch.
https://lore.kernel.org/r/d132363fc9228473e9e652b70a3761b94de32d70.1688475844.git.geert+renesas@glider.be

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

^ permalink raw reply	[flat|nested] 35+ messages in thread

* Re: [PATCH v8 08/14] mfd: rk8xx: add rk806 support
  2023-05-04 17:36 ` [PATCH v8 08/14] mfd: rk8xx: add rk806 support Sebastian Reichel
  2023-05-15 15:20   ` Lee Jones
@ 2023-11-15 17:17   ` Neil Armstrong
  2023-11-15 18:00     ` Sebastian Reichel
  1 sibling, 1 reply; 35+ messages in thread
From: Neil Armstrong @ 2023-11-15 17:17 UTC (permalink / raw)
  To: Sebastian Reichel, Heiko Stuebner, Rob Herring,
	Krzysztof Kozlowski, Lee Jones
  Cc: Michael Turquette, Stephen Boyd, Linus Walleij, Mark Brown,
	Liam Girdwood, Alexandre Belloni, Alessandro Zummo,
	linux-rockchip, devicetree, linux-kernel, kernel,
	Diederik de Haas, Vincent Legoll

Hi Sebastian,

On 04/05/2023 19:36, Sebastian Reichel wrote:
> Add support for SPI connected rk806, which is used by the RK3588
> evaluation boards. The PMIC is advertised to support I2C and SPI,
> but the evaluation boards all use SPI. Thus only SPI support is
> added here.
> 
> Acked-for-MFD-by: Lee Jones <lee@kernel.org>
> Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, Quartz64 Model A + B
> Tested-by: Vincent Legoll <vincent.legoll@gmail.com> # Pine64 QuartzPro64
> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
> ---
>   drivers/mfd/Kconfig       |  14 ++
>   drivers/mfd/Makefile      |   1 +
>   drivers/mfd/rk8xx-core.c  |  69 ++++++-
>   drivers/mfd/rk8xx-spi.c   | 124 ++++++++++++
>   include/linux/mfd/rk808.h | 409 ++++++++++++++++++++++++++++++++++++++
>   5 files changed, 614 insertions(+), 3 deletions(-)
>   create mode 100644 drivers/mfd/rk8xx-spi.c
> 

<snip>

>   
> -	ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE,
> -			      cells, nr_cells, NULL, 0,
> +	ret = devm_mfd_add_devices(dev, 0, cells, nr_cells, NULL, 0,
>   			      regmap_irq_get_domain(rk808->irq_data));

It seems you replaced PLATFORM_DEVID_NONE by 0, triggering again the bug preventing
having multiples RK pmics on the same system I fixed earlier at [1].

This gives (again):
<4>[ 0.664107] sysfs: cannot create duplicate filename '/bus/platform/devices/rk808-clkout'
<4>[ 0.664120] CPU: 3 PID: 97 Comm: kworker/u12:2 Not tainted 6.6.1 #1
<4>[ 0.664131] Hardware name: Hardkernel ODROID-GO-Ultra (DT)
<4>[ 0.664139] Workqueue: events_unbound deferred_probe_work_func
<4>[ 0.664160] Call trace:
<4>[ 0.664165] dump_backtrace+0x9c/0x11c
<4>[ 0.664181] show_stack+0x18/0x24
<4>[ 0.664193] dump_stack_lvl+0x78/0xc4
<4>[ 0.664205] dump_stack+0x18/0x24
<4>[ 0.664215] sysfs_warn_dup+0x64/0x80
<4>[ 0.664227] sysfs_do_create_link_sd+0xf0/0xf8
<4>[ 0.664239] sysfs_create_link+0x20/0x40
<4>[ 0.664250] bus_add_device+0x114/0x160
<4>[ 0.664259] device_add+0x3f0/0x7cc
<4>[ 0.664267] platform_device_add+0x180/0x270
<4>[ 0.664278] mfd_add_device+0x390/0x4a8
<4>[ 0.664290] devm_mfd_add_devices+0xb0/0x150
<4>[ 0.664301] rk8xx_probe+0x26c/0x410
<4>[ 0.664312] rk8xx_i2c_probe+0x64/0x98
<4>[ 0.664323] i2c_device_probe+0x104/0x2e8
<4>[ 0.664333] really_probe+0x184/0x3c8
<4>[ 0.664342] __driver_probe_device+0x7c/0x16c
<4>[ 0.664351] driver_probe_device+0x3c/0x10c
<4>[ 0.664360] __device_attach_driver+0xbc/0x158
<4>[ 0.664369] bus_for_each_drv+0x80/0xdc
<4>[ 0.664377] __device_attach+0x9c/0x1ac
<4>[ 0.664386] device_initial_probe+0x14/0x20
<4>[ 0.664395] bus_probe_device+0xac/0xb0
<4>[ 0.664403] deferred_probe_work_func+0xa0/0xf4
<4>[ 0.664412] process_one_work+0x1bc/0x378
<4>[ 0.664421] worker_thread+0x1dc/0x3d4
<4>[ 0.664429] kthread+0x104/0x118
<4>[ 0.664440] ret_from_fork+0x10/0x20
<3>[ 0.664494] rk8xx-i2c 0-001c: error -EEXIST: failed to add MFD devices
<4>[ 0.666769] rk8xx-i2c: probe of 0-001c failed with error -17

[1] https://lore.kernel.org/r/20221025-rk808-multi-v2-0-d292d51ada81@linaro.org

Thanks,
Neil

>   	if (ret)
>   		return dev_err_probe(dev, ret, "failed to add MFD devices\n");

<snip>


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

^ permalink raw reply	[flat|nested] 35+ messages in thread

* Re: [PATCH v8 08/14] mfd: rk8xx: add rk806 support
  2023-11-15 17:17   ` Neil Armstrong
@ 2023-11-15 18:00     ` Sebastian Reichel
  2023-11-16  8:41       ` Neil Armstrong
  0 siblings, 1 reply; 35+ messages in thread
From: Sebastian Reichel @ 2023-11-15 18:00 UTC (permalink / raw)
  To: Neil Armstrong
  Cc: Heiko Stuebner, Rob Herring, Krzysztof Kozlowski, Lee Jones,
	Michael Turquette, Stephen Boyd, Linus Walleij, Mark Brown,
	Liam Girdwood, Alexandre Belloni, Alessandro Zummo,
	linux-rockchip, devicetree, linux-kernel, kernel,
	Diederik de Haas, Vincent Legoll


[-- Attachment #1.1: Type: text/plain, Size: 4701 bytes --]

Hi Neil,

On Wed, Nov 15, 2023 at 06:17:50PM +0100, Neil Armstrong wrote:
> Hi Sebastian,
> 
> On 04/05/2023 19:36, Sebastian Reichel wrote:
> > Add support for SPI connected rk806, which is used by the RK3588
> > evaluation boards. The PMIC is advertised to support I2C and SPI,
> > but the evaluation boards all use SPI. Thus only SPI support is
> > added here.
> > 
> > Acked-for-MFD-by: Lee Jones <lee@kernel.org>
> > Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, Quartz64 Model A + B
> > Tested-by: Vincent Legoll <vincent.legoll@gmail.com> # Pine64 QuartzPro64
> > Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
> > ---
> >   drivers/mfd/Kconfig       |  14 ++
> >   drivers/mfd/Makefile      |   1 +
> >   drivers/mfd/rk8xx-core.c  |  69 ++++++-
> >   drivers/mfd/rk8xx-spi.c   | 124 ++++++++++++
> >   include/linux/mfd/rk808.h | 409 ++++++++++++++++++++++++++++++++++++++
> >   5 files changed, 614 insertions(+), 3 deletions(-)
> >   create mode 100644 drivers/mfd/rk8xx-spi.c
> > 
> 
> <snip>
> 
> > -	ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE,
> > -			      cells, nr_cells, NULL, 0,
> > +	ret = devm_mfd_add_devices(dev, 0, cells, nr_cells, NULL, 0,
> >   			      regmap_irq_get_domain(rk808->irq_data));
> 
> It seems you replaced PLATFORM_DEVID_NONE by 0, triggering again the bug preventing
> having multiples RK pmics on the same system I fixed earlier at [1].

All cells have PLATFORM_DEVID_NONE specified and thus are registered
without an ID. I changed this bit to avoid overriding the
information, since I did not want to have PLATFORM_DEVID_NONE for
rk806.

> This gives (again):
> <4>[ 0.664107] sysfs: cannot create duplicate filename '/bus/platform/devices/rk808-clkout'

Which means, you do not want PLATFORM_DEVID_NONE (-1), but
PLATFORM_DEVID_AUTO (-2). The above path is the expected path
for PLATFORM_DEVID_NONE.

> <4>[ 0.664120] CPU: 3 PID: 97 Comm: kworker/u12:2 Not tainted 6.6.1 #1
> <4>[ 0.664131] Hardware name: Hardkernel ODROID-GO-Ultra (DT)
> <4>[ 0.664139] Workqueue: events_unbound deferred_probe_work_func
> <4>[ 0.664160] Call trace:
> <4>[ 0.664165] dump_backtrace+0x9c/0x11c
> <4>[ 0.664181] show_stack+0x18/0x24
> <4>[ 0.664193] dump_stack_lvl+0x78/0xc4
> <4>[ 0.664205] dump_stack+0x18/0x24
> <4>[ 0.664215] sysfs_warn_dup+0x64/0x80
> <4>[ 0.664227] sysfs_do_create_link_sd+0xf0/0xf8
> <4>[ 0.664239] sysfs_create_link+0x20/0x40
> <4>[ 0.664250] bus_add_device+0x114/0x160
> <4>[ 0.664259] device_add+0x3f0/0x7cc
> <4>[ 0.664267] platform_device_add+0x180/0x270
> <4>[ 0.664278] mfd_add_device+0x390/0x4a8
> <4>[ 0.664290] devm_mfd_add_devices+0xb0/0x150
> <4>[ 0.664301] rk8xx_probe+0x26c/0x410
> <4>[ 0.664312] rk8xx_i2c_probe+0x64/0x98
> <4>[ 0.664323] i2c_device_probe+0x104/0x2e8
> <4>[ 0.664333] really_probe+0x184/0x3c8
> <4>[ 0.664342] __driver_probe_device+0x7c/0x16c
> <4>[ 0.664351] driver_probe_device+0x3c/0x10c
> <4>[ 0.664360] __device_attach_driver+0xbc/0x158
> <4>[ 0.664369] bus_for_each_drv+0x80/0xdc
> <4>[ 0.664377] __device_attach+0x9c/0x1ac
> <4>[ 0.664386] device_initial_probe+0x14/0x20
> <4>[ 0.664395] bus_probe_device+0xac/0xb0
> <4>[ 0.664403] deferred_probe_work_func+0xa0/0xf4
> <4>[ 0.664412] process_one_work+0x1bc/0x378
> <4>[ 0.664421] worker_thread+0x1dc/0x3d4
> <4>[ 0.664429] kthread+0x104/0x118
> <4>[ 0.664440] ret_from_fork+0x10/0x20
> <3>[ 0.664494] rk8xx-i2c 0-001c: error -EEXIST: failed to add MFD devices
> <4>[ 0.666769] rk8xx-i2c: probe of 0-001c failed with error -17

I didn't notice when working on rk806, but after analyzing it now:

Your patch effectively set the cells to PLATFORM_DEVID_AUTO, because
you set all cells to PLATFORM_DEVID_NONE (-1) and additionally used
PLATFORM_DEVID_NONE (-1) for the devm_mfd_add_devices() call. But
that uses the sum of both IDs. Adding -1 to -1 is -2 and thus
PLATFORM_DEVID_AUTO. This is of course very confusing and just
worked by chance. There are two options:

1. Modify all cells to use PLATFORM_DEVID_AUTO instead of
PLATFORM_DEVID_NONE
2. Drop the .id from all cells and use PLATFORM_DEVID_AUTO in the
call to devm_mfd_add_devices()

Note, that switching from PLATFORM_DEVID_NONE to PLATFORM_DEVID_AUTO
modifies sysfs paths and thus might break people's scripts; that's why
I tried not to modify any existing platform. I will let you deal
with that, since I cannot even test any !rk806 platform supported by
this driver :)

Also mfd_add_device should probably get special handling for
PLATFORM_DEVID_NONE, just like it already has special handling
for PLATFORM_DEVID_AUTO.

Greetings,

-- Sebastian

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[-- Attachment #2: Type: text/plain, Size: 170 bytes --]

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

^ permalink raw reply	[flat|nested] 35+ messages in thread

* Re: [PATCH v8 08/14] mfd: rk8xx: add rk806 support
  2023-11-15 18:00     ` Sebastian Reichel
@ 2023-11-16  8:41       ` Neil Armstrong
  2023-11-16 11:30         ` Sebastian Reichel
  0 siblings, 1 reply; 35+ messages in thread
From: Neil Armstrong @ 2023-11-16  8:41 UTC (permalink / raw)
  To: Sebastian Reichel
  Cc: Heiko Stuebner, Rob Herring, Krzysztof Kozlowski, Lee Jones,
	Michael Turquette, Stephen Boyd, Linus Walleij, Mark Brown,
	Liam Girdwood, Alexandre Belloni, Alessandro Zummo,
	linux-rockchip, devicetree, linux-kernel, kernel,
	Diederik de Haas, Vincent Legoll

Hi,

On 15/11/2023 19:00, Sebastian Reichel wrote:
> Hi Neil,
> 
> On Wed, Nov 15, 2023 at 06:17:50PM +0100, Neil Armstrong wrote:
>> Hi Sebastian,
>>
>> On 04/05/2023 19:36, Sebastian Reichel wrote:
>>> Add support for SPI connected rk806, which is used by the RK3588
>>> evaluation boards. The PMIC is advertised to support I2C and SPI,
>>> but the evaluation boards all use SPI. Thus only SPI support is
>>> added here.
>>>
>>> Acked-for-MFD-by: Lee Jones <lee@kernel.org>
>>> Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, Quartz64 Model A + B
>>> Tested-by: Vincent Legoll <vincent.legoll@gmail.com> # Pine64 QuartzPro64
>>> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
>>> ---
>>>    drivers/mfd/Kconfig       |  14 ++
>>>    drivers/mfd/Makefile      |   1 +
>>>    drivers/mfd/rk8xx-core.c  |  69 ++++++-
>>>    drivers/mfd/rk8xx-spi.c   | 124 ++++++++++++
>>>    include/linux/mfd/rk808.h | 409 ++++++++++++++++++++++++++++++++++++++
>>>    5 files changed, 614 insertions(+), 3 deletions(-)
>>>    create mode 100644 drivers/mfd/rk8xx-spi.c
>>>
>>
>> <snip>
>>
>>> -	ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE,
>>> -			      cells, nr_cells, NULL, 0,
>>> +	ret = devm_mfd_add_devices(dev, 0, cells, nr_cells, NULL, 0,
>>>    			      regmap_irq_get_domain(rk808->irq_data));
>>
>> It seems you replaced PLATFORM_DEVID_NONE by 0, triggering again the bug preventing
>> having multiples RK pmics on the same system I fixed earlier at [1].
> 
> All cells have PLATFORM_DEVID_NONE specified and thus are registered
> without an ID. I changed this bit to avoid overriding the
> information, since I did not want to have PLATFORM_DEVID_NONE for
> rk806.
> 
>> This gives (again):
>> <4>[ 0.664107] sysfs: cannot create duplicate filename '/bus/platform/devices/rk808-clkout'
> 
> Which means, you do not want PLATFORM_DEVID_NONE (-1), but
> PLATFORM_DEVID_AUTO (-2). The above path is the expected path
> for PLATFORM_DEVID_NONE.
> 
>> <4>[ 0.664120] CPU: 3 PID: 97 Comm: kworker/u12:2 Not tainted 6.6.1 #1
>> <4>[ 0.664131] Hardware name: Hardkernel ODROID-GO-Ultra (DT)
>> <4>[ 0.664139] Workqueue: events_unbound deferred_probe_work_func
>> <4>[ 0.664160] Call trace:
>> <4>[ 0.664165] dump_backtrace+0x9c/0x11c
>> <4>[ 0.664181] show_stack+0x18/0x24
>> <4>[ 0.664193] dump_stack_lvl+0x78/0xc4
>> <4>[ 0.664205] dump_stack+0x18/0x24
>> <4>[ 0.664215] sysfs_warn_dup+0x64/0x80
>> <4>[ 0.664227] sysfs_do_create_link_sd+0xf0/0xf8
>> <4>[ 0.664239] sysfs_create_link+0x20/0x40
>> <4>[ 0.664250] bus_add_device+0x114/0x160
>> <4>[ 0.664259] device_add+0x3f0/0x7cc
>> <4>[ 0.664267] platform_device_add+0x180/0x270
>> <4>[ 0.664278] mfd_add_device+0x390/0x4a8
>> <4>[ 0.664290] devm_mfd_add_devices+0xb0/0x150
>> <4>[ 0.664301] rk8xx_probe+0x26c/0x410
>> <4>[ 0.664312] rk8xx_i2c_probe+0x64/0x98
>> <4>[ 0.664323] i2c_device_probe+0x104/0x2e8
>> <4>[ 0.664333] really_probe+0x184/0x3c8
>> <4>[ 0.664342] __driver_probe_device+0x7c/0x16c
>> <4>[ 0.664351] driver_probe_device+0x3c/0x10c
>> <4>[ 0.664360] __device_attach_driver+0xbc/0x158
>> <4>[ 0.664369] bus_for_each_drv+0x80/0xdc
>> <4>[ 0.664377] __device_attach+0x9c/0x1ac
>> <4>[ 0.664386] device_initial_probe+0x14/0x20
>> <4>[ 0.664395] bus_probe_device+0xac/0xb0
>> <4>[ 0.664403] deferred_probe_work_func+0xa0/0xf4
>> <4>[ 0.664412] process_one_work+0x1bc/0x378
>> <4>[ 0.664421] worker_thread+0x1dc/0x3d4
>> <4>[ 0.664429] kthread+0x104/0x118
>> <4>[ 0.664440] ret_from_fork+0x10/0x20
>> <3>[ 0.664494] rk8xx-i2c 0-001c: error -EEXIST: failed to add MFD devices
>> <4>[ 0.666769] rk8xx-i2c: probe of 0-001c failed with error -17
> 
> I didn't notice when working on rk806, but after analyzing it now:
> 
> Your patch effectively set the cells to PLATFORM_DEVID_AUTO, because
> you set all cells to PLATFORM_DEVID_NONE (-1) and additionally used
> PLATFORM_DEVID_NONE (-1) for the devm_mfd_add_devices() call. But
> that uses the sum of both IDs. Adding -1 to -1 is -2 and thus
> PLATFORM_DEVID_AUTO. This is of course very confusing and just
> worked by chance. There are two options:
> 
> 1. Modify all cells to use PLATFORM_DEVID_AUTO instead of
> PLATFORM_DEVID_NONE
> 2. Drop the .id from all cells and use PLATFORM_DEVID_AUTO in the
> call to devm_mfd_add_devices()
> 
> Note, that switching from PLATFORM_DEVID_NONE to PLATFORM_DEVID_AUTO
> modifies sysfs paths and thus might break people's scripts; that's why
> I tried not to modify any existing platform. I will let you deal
> with that, since I cannot even test any !rk806 platform supported by
> this driver :)

Yes it will modify sysfs path, but it's a regression since this before this patch
everything was registered with PLATFORM_DEVID_AUTO anyway,
so I'll provide a fix adding back PLATFORM_DEVID_NONE to devm_mfd_add_devices
in a first time...

> 
> Also mfd_add_device should probably get special handling for
> PLATFORM_DEVID_NONE, just like it already has special handling
> for PLATFORM_DEVID_AUTO.

... and yes thanks for the great analysis I'll provide a change cleaning the mess.

Thanks,
Neil

> 
> Greetings,
> 
> -- Sebastian


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

^ permalink raw reply	[flat|nested] 35+ messages in thread

* Re: [PATCH v8 08/14] mfd: rk8xx: add rk806 support
  2023-11-16  8:41       ` Neil Armstrong
@ 2023-11-16 11:30         ` Sebastian Reichel
  0 siblings, 0 replies; 35+ messages in thread
From: Sebastian Reichel @ 2023-11-16 11:30 UTC (permalink / raw)
  To: Neil Armstrong
  Cc: Heiko Stuebner, Rob Herring, Krzysztof Kozlowski, Lee Jones,
	Michael Turquette, Stephen Boyd, Linus Walleij, Mark Brown,
	Liam Girdwood, Alexandre Belloni, Alessandro Zummo,
	linux-rockchip, devicetree, linux-kernel, kernel,
	Diederik de Haas, Vincent Legoll


[-- Attachment #1.1: Type: text/plain, Size: 5720 bytes --]

Hi,

On Thu, Nov 16, 2023 at 09:41:03AM +0100, Neil Armstrong wrote:
> On 15/11/2023 19:00, Sebastian Reichel wrote:
> > On Wed, Nov 15, 2023 at 06:17:50PM +0100, Neil Armstrong wrote:
> > > On 04/05/2023 19:36, Sebastian Reichel wrote:
> > > > Add support for SPI connected rk806, which is used by the RK3588
> > > > evaluation boards. The PMIC is advertised to support I2C and SPI,
> > > > but the evaluation boards all use SPI. Thus only SPI support is
> > > > added here.
> > > > 
> > > > Acked-for-MFD-by: Lee Jones <lee@kernel.org>
> > > > Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, Quartz64 Model A + B
> > > > Tested-by: Vincent Legoll <vincent.legoll@gmail.com> # Pine64 QuartzPro64
> > > > Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
> > > > ---
> > > >    drivers/mfd/Kconfig       |  14 ++
> > > >    drivers/mfd/Makefile      |   1 +
> > > >    drivers/mfd/rk8xx-core.c  |  69 ++++++-
> > > >    drivers/mfd/rk8xx-spi.c   | 124 ++++++++++++
> > > >    include/linux/mfd/rk808.h | 409 ++++++++++++++++++++++++++++++++++++++
> > > >    5 files changed, 614 insertions(+), 3 deletions(-)
> > > >    create mode 100644 drivers/mfd/rk8xx-spi.c
> > > > 
> > > 
> > > <snip>
> > > 
> > > > -	ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE,
> > > > -			      cells, nr_cells, NULL, 0,
> > > > +	ret = devm_mfd_add_devices(dev, 0, cells, nr_cells, NULL, 0,
> > > >    			      regmap_irq_get_domain(rk808->irq_data));
> > > 
> > > It seems you replaced PLATFORM_DEVID_NONE by 0, triggering again the bug preventing
> > > having multiples RK pmics on the same system I fixed earlier at [1].
> > 
> > All cells have PLATFORM_DEVID_NONE specified and thus are registered
> > without an ID. I changed this bit to avoid overriding the
> > information, since I did not want to have PLATFORM_DEVID_NONE for
> > rk806.
> > 
> > > This gives (again):
> > > <4>[ 0.664107] sysfs: cannot create duplicate filename '/bus/platform/devices/rk808-clkout'
> > 
> > Which means, you do not want PLATFORM_DEVID_NONE (-1), but
> > PLATFORM_DEVID_AUTO (-2). The above path is the expected path
> > for PLATFORM_DEVID_NONE.
> > 
> > > <4>[ 0.664120] CPU: 3 PID: 97 Comm: kworker/u12:2 Not tainted 6.6.1 #1
> > > <4>[ 0.664131] Hardware name: Hardkernel ODROID-GO-Ultra (DT)
> > > <4>[ 0.664139] Workqueue: events_unbound deferred_probe_work_func
> > > <4>[ 0.664160] Call trace:
> > > <4>[ 0.664165] dump_backtrace+0x9c/0x11c
> > > <4>[ 0.664181] show_stack+0x18/0x24
> > > <4>[ 0.664193] dump_stack_lvl+0x78/0xc4
> > > <4>[ 0.664205] dump_stack+0x18/0x24
> > > <4>[ 0.664215] sysfs_warn_dup+0x64/0x80
> > > <4>[ 0.664227] sysfs_do_create_link_sd+0xf0/0xf8
> > > <4>[ 0.664239] sysfs_create_link+0x20/0x40
> > > <4>[ 0.664250] bus_add_device+0x114/0x160
> > > <4>[ 0.664259] device_add+0x3f0/0x7cc
> > > <4>[ 0.664267] platform_device_add+0x180/0x270
> > > <4>[ 0.664278] mfd_add_device+0x390/0x4a8
> > > <4>[ 0.664290] devm_mfd_add_devices+0xb0/0x150
> > > <4>[ 0.664301] rk8xx_probe+0x26c/0x410
> > > <4>[ 0.664312] rk8xx_i2c_probe+0x64/0x98
> > > <4>[ 0.664323] i2c_device_probe+0x104/0x2e8
> > > <4>[ 0.664333] really_probe+0x184/0x3c8
> > > <4>[ 0.664342] __driver_probe_device+0x7c/0x16c
> > > <4>[ 0.664351] driver_probe_device+0x3c/0x10c
> > > <4>[ 0.664360] __device_attach_driver+0xbc/0x158
> > > <4>[ 0.664369] bus_for_each_drv+0x80/0xdc
> > > <4>[ 0.664377] __device_attach+0x9c/0x1ac
> > > <4>[ 0.664386] device_initial_probe+0x14/0x20
> > > <4>[ 0.664395] bus_probe_device+0xac/0xb0
> > > <4>[ 0.664403] deferred_probe_work_func+0xa0/0xf4
> > > <4>[ 0.664412] process_one_work+0x1bc/0x378
> > > <4>[ 0.664421] worker_thread+0x1dc/0x3d4
> > > <4>[ 0.664429] kthread+0x104/0x118
> > > <4>[ 0.664440] ret_from_fork+0x10/0x20
> > > <3>[ 0.664494] rk8xx-i2c 0-001c: error -EEXIST: failed to add MFD devices
> > > <4>[ 0.666769] rk8xx-i2c: probe of 0-001c failed with error -17
> > 
> > I didn't notice when working on rk806, but after analyzing it now:
> > 
> > Your patch effectively set the cells to PLATFORM_DEVID_AUTO, because
> > you set all cells to PLATFORM_DEVID_NONE (-1) and additionally used
> > PLATFORM_DEVID_NONE (-1) for the devm_mfd_add_devices() call. But
> > that uses the sum of both IDs. Adding -1 to -1 is -2 and thus
> > PLATFORM_DEVID_AUTO. This is of course very confusing and just
> > worked by chance. There are two options:
> > 
> > 1. Modify all cells to use PLATFORM_DEVID_AUTO instead of
> > PLATFORM_DEVID_NONE
> > 2. Drop the .id from all cells and use PLATFORM_DEVID_AUTO in the
> > call to devm_mfd_add_devices()
> > 
> > Note, that switching from PLATFORM_DEVID_NONE to PLATFORM_DEVID_AUTO
> > modifies sysfs paths and thus might break people's scripts; that's why
> > I tried not to modify any existing platform. I will let you deal
> > with that, since I cannot even test any !rk806 platform supported by
> > this driver :)
> 
> Yes it will modify sysfs path, but it's a regression since this before this patch
> everything was registered with PLATFORM_DEVID_AUTO anyway,
> so I'll provide a fix adding back PLATFORM_DEVID_NONE to devm_mfd_add_devices
> in a first time...

If you just add back PLATFORM_DEVID_NONE to devm_mfd_add_devices(),
it will break rk806, since that correctly states PLATFORM_DEVID_AUTO
in its .id and that would become -3.

> > Also mfd_add_device should probably get special handling for
> > PLATFORM_DEVID_NONE, just like it already has special handling
> > for PLATFORM_DEVID_AUTO.
> 
> ... and yes thanks for the great analysis I'll provide a change
> cleaning the mess.

Thanks,

-- Sebastian

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[-- Attachment #2: Type: text/plain, Size: 170 bytes --]

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

^ permalink raw reply	[flat|nested] 35+ messages in thread

end of thread, other threads:[~2023-11-16 11:30 UTC | newest]

Thread overview: 35+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-05-04 17:36 [PATCH v8 00/14] mfd/pinctrl/regulator: Add RK806 Support Sebastian Reichel
2023-05-04 17:36 ` [PATCH v8 01/14] clk: RK808: reduce 'struct rk808' usage Sebastian Reichel
2023-05-15 15:14   ` Lee Jones
2023-05-04 17:36 ` [PATCH v8 02/14] mfd: rk808: convert to device managed resources Sebastian Reichel
2023-05-15 15:17   ` Lee Jones
2023-05-04 17:36 ` [PATCH v8 03/14] mfd: rk808: use dev_err_probe Sebastian Reichel
2023-05-15 15:18   ` Lee Jones
2023-05-04 17:36 ` [PATCH v8 04/14] mfd: rk808: replace 'struct i2c_client' with 'struct device' Sebastian Reichel
2023-05-15 15:18   ` Lee Jones
2023-05-04 17:36 ` [PATCH v8 05/14] mfd: rk808: split into core and i2c Sebastian Reichel
2023-05-15 15:19   ` Lee Jones
     [not found]   ` <CGME20230516212700eucas1p1fbde1b6181c18d821e0796b6b6a4fa00@eucas1p1.samsung.com>
2023-05-16 21:26     ` Marek Szyprowski
2023-05-16 22:01       ` Sebastian Reichel
2023-06-30 11:34   ` Geert Uytterhoeven
2023-06-30 18:48     ` Sebastian Reichel
2023-07-04 13:08       ` Geert Uytterhoeven
2023-05-04 17:36 ` [PATCH v8 06/14] mfd: rk8xx-i2c: use device_get_match_data Sebastian Reichel
2023-05-15 15:19   ` Lee Jones
2023-05-04 17:36 ` [PATCH v8 07/14] dt-bindings: mfd: add rk806 binding Sebastian Reichel
2023-05-15 15:20   ` Lee Jones
2023-05-04 17:36 ` [PATCH v8 08/14] mfd: rk8xx: add rk806 support Sebastian Reichel
2023-05-15 15:20   ` Lee Jones
2023-11-15 17:17   ` Neil Armstrong
2023-11-15 18:00     ` Sebastian Reichel
2023-11-16  8:41       ` Neil Armstrong
2023-11-16 11:30         ` Sebastian Reichel
2023-05-04 17:36 ` [PATCH v8 09/14] pinctrl: rk805: add rk806 pinctrl support Sebastian Reichel
2023-05-15 15:21   ` Lee Jones
2023-05-04 17:36 ` [PATCH v8 10/14] regulator: expose regulator_find_closest_bigger Sebastian Reichel
2023-05-04 17:36 ` [PATCH v8 11/14] regulator: rk808: fix asynchronous probing Sebastian Reichel
2023-05-04 17:36 ` [PATCH v8 12/14] regulator: rk808: cleanup parent device usage Sebastian Reichel
2023-05-04 17:36 ` [PATCH v8 13/14] regulator: rk808: revert to synchronous probing Sebastian Reichel
2023-05-04 17:36 ` [PATCH v8 14/14] regulator: rk808: add rk806 support Sebastian Reichel
2023-05-15 15:24 ` [GIT PULL] Immutable branch between MFD, Clk, Input, Pinctrl, RTC, Power, Regulator and Sound due for the v6.5 merge window Lee Jones
2023-05-23 21:44 ` (subset) [PATCH v8 00/14] mfd/pinctrl/regulator: Add RK806 Support Mark Brown

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).