* [PATCH RT 1/2] serial: 8250: only atomic lock for console
2020-01-10 15:39 [PATCH RT 0/2] serial: 8250: atomic console fixups John Ogness
@ 2020-01-10 15:39 ` John Ogness
2020-01-10 15:39 ` [PATCH RT 2/2] serial: 8250: fsl/ingenic/mtk: fix atomic console John Ogness
2020-01-10 17:36 ` [PATCH RT 0/2] serial: 8250: atomic console fixups Dick Hollenbeck
2 siblings, 0 replies; 4+ messages in thread
From: John Ogness @ 2020-01-10 15:39 UTC (permalink / raw)
To: Sebastian Andrzej Siewior
Cc: Petr Mladek, Sergey Senozhatsky, Dick Hollenbeck, linux-kernel,
linux-rt-users
The atomic console implementation requires that IER is synchronized
between atomic and non-atomic usage. However, it was implemented such
that the console_atomic_lock was performed for all IER access, even
if that port was not a console.
The implementation also used a usage counter to keep track of IER
clear/restore windows. However, this is not needed because the
console_atomic_lock synchronization of IER access with prevent any
situations where IER is prematurely restored or left cleared.
Move the IER access functions to inline macros. They will only
console_atomic_lock if the port is a console. Remove the
restore_ier() function by having clear_ier() return the prior IER
value so that the caller can restore it using set_ier(). Rename the
IER access functions to match other 8250 wrapper macros.
Suggested-by: Dick Hollenbeck <dick@softplc.com>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
---
drivers/tty/serial/8250/8250.h | 65 +++++++++++++++--------
drivers/tty/serial/8250/8250_core.c | 6 +--
drivers/tty/serial/8250/8250_dma.c | 4 +-
drivers/tty/serial/8250/8250_port.c | 81 +++++++----------------------
4 files changed, 66 insertions(+), 90 deletions(-)
diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h
index 4e6c74330829..b29aed97a54d 100644
--- a/drivers/tty/serial/8250/8250.h
+++ b/drivers/tty/serial/8250/8250.h
@@ -96,10 +96,6 @@ struct serial8250_config {
#define SERIAL8250_SHARE_IRQS 0
#endif
-void set_ier(struct uart_8250_port *up, unsigned char ier);
-void clear_ier(struct uart_8250_port *up);
-void restore_ier(struct uart_8250_port *up);
-
#define SERIAL8250_PORT_FLAGS(_base, _irq, _flags) \
{ \
.iobase = _base, \
@@ -134,39 +130,64 @@ static inline void serial_dl_write(struct uart_8250_port *up, int value)
up->dl_write(up, value);
}
-static inline bool serial8250_set_THRI(struct uart_8250_port *up)
+static inline void serial8250_set_IER(struct uart_8250_port *up,
+ unsigned char ier)
{
- if (up->ier & UART_IER_THRI)
- return false;
- up->ier |= UART_IER_THRI;
- serial_out(up, UART_IER, up->ier);
- return true;
+ struct uart_port *port = &up->port;
+ unsigned int flags;
+ bool is_console;
+
+ is_console = uart_console(port);
+
+ if (is_console)
+ console_atomic_lock(&flags);
+
+ serial_out(up, UART_IER, ier);
+
+ if (is_console)
+ console_atomic_unlock(flags);
}
-static inline bool serial8250_set_THRI_sier(struct uart_8250_port *up)
+static inline unsigned char serial8250_clear_IER(struct uart_8250_port *up)
{
- if (up->ier & UART_IER_THRI)
- return false;
- up->ier |= UART_IER_THRI;
- set_ier(up, up->ier);
- return true;
+ struct uart_port *port = &up->port;
+ unsigned int clearval = 0;
+ unsigned int prior;
+ unsigned int flags;
+ bool is_console;
+
+ is_console = uart_console(port);
+
+ if (up->capabilities & UART_CAP_UUE)
+ clearval = UART_IER_UUE;
+
+ if (is_console)
+ console_atomic_lock(&flags);
+
+ prior = serial_port_in(port, UART_IER);
+ serial_port_out(port, UART_IER, clearval);
+
+ if (is_console)
+ console_atomic_unlock(flags);
+
+ return prior;
}
-static inline bool serial8250_clear_THRI(struct uart_8250_port *up)
+static inline bool serial8250_set_THRI(struct uart_8250_port *up)
{
- if (!(up->ier & UART_IER_THRI))
+ if (up->ier & UART_IER_THRI)
return false;
- up->ier &= ~UART_IER_THRI;
- serial_out(up, UART_IER, up->ier);
+ up->ier |= UART_IER_THRI;
+ serial8250_set_IER(up, up->ier);
return true;
}
-static inline bool serial8250_clear_THRI_sier(struct uart_8250_port *up)
+static inline bool serial8250_clear_THRI(struct uart_8250_port *up)
{
if (!(up->ier & UART_IER_THRI))
return false;
up->ier &= ~UART_IER_THRI;
- set_ier(up, up->ier);
+ serial8250_set_IER(up, up->ier);
return true;
}
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 8c40472eff19..eabb9274c0a9 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -275,7 +275,7 @@ static void serial8250_timeout(struct timer_list *t)
static void serial8250_backup_timeout(struct timer_list *t)
{
struct uart_8250_port *up = from_timer(up, t, timer);
- unsigned int iir, lsr;
+ unsigned int iir, ier = 0, lsr;
unsigned long flags;
spin_lock_irqsave(&up->port.lock, flags);
@@ -285,7 +285,7 @@ static void serial8250_backup_timeout(struct timer_list *t)
* based handler.
*/
if (up->port.irq)
- clear_ier(up);
+ ier = serial8250_clear_IER(up);
iir = serial_in(up, UART_IIR);
@@ -308,7 +308,7 @@ static void serial8250_backup_timeout(struct timer_list *t)
serial8250_tx_chars(up);
if (up->port.irq)
- restore_ier(up);
+ serial8250_set_IER(up, ier);
spin_unlock_irqrestore(&up->port.lock, flags);
diff --git a/drivers/tty/serial/8250/8250_dma.c b/drivers/tty/serial/8250/8250_dma.c
index c91dafbca57c..890fa7ddaa7f 100644
--- a/drivers/tty/serial/8250/8250_dma.c
+++ b/drivers/tty/serial/8250/8250_dma.c
@@ -35,7 +35,7 @@ static void __dma_tx_complete(void *param)
ret = serial8250_tx_dma(p);
if (ret)
- serial8250_set_THRI_sier(p);
+ serial8250_set_THRI(p);
spin_unlock_irqrestore(&p->port.lock, flags);
}
@@ -98,7 +98,7 @@ int serial8250_tx_dma(struct uart_8250_port *p)
dma_async_issue_pending(dma->txchan);
if (dma->tx_err) {
dma->tx_err = 0;
- serial8250_clear_THRI_sier(p);
+ serial8250_clear_THRI(p);
}
return 0;
err:
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 51d9a79b70db..776770112223 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -721,7 +721,7 @@ static void serial8250_set_sleep(struct uart_8250_port *p, int sleep)
serial_out(p, UART_EFR, UART_EFR_ECB);
serial_out(p, UART_LCR, 0);
}
- set_ier(p, sleep ? UART_IERX_SLEEP : 0);
+ serial8250_set_IER(p, sleep ? UART_IERX_SLEEP : 0);
if (p->capabilities & UART_CAP_EFR) {
serial_out(p, UART_LCR, UART_LCR_CONF_MODE_B);
serial_out(p, UART_EFR, efr);
@@ -1390,7 +1390,7 @@ static void serial8250_stop_rx(struct uart_port *port)
up->ier &= ~(UART_IER_RLSI | UART_IER_RDI);
up->port.read_status_mask &= ~UART_LSR_DR;
- set_ier(up, up->ier);
+ serial8250_set_IER(up, up->ier);
serial8250_rpm_put(up);
}
@@ -1408,7 +1408,7 @@ static void __do_stop_tx_rs485(struct uart_8250_port *p)
serial8250_clear_and_reinit_fifos(p);
p->ier |= UART_IER_RLSI | UART_IER_RDI;
- set_ier(p, p->ier);
+ serial8250_set_IER(p, p->ier);
}
}
static enum hrtimer_restart serial8250_em485_handle_stop_tx(struct hrtimer *t)
@@ -1459,7 +1459,7 @@ static void __stop_tx_rs485(struct uart_8250_port *p)
static inline void __do_stop_tx(struct uart_8250_port *p)
{
- if (serial8250_clear_THRI_sier(p))
+ if (serial8250_clear_THRI(p))
serial8250_rpm_put_tx(p);
}
@@ -1509,7 +1509,7 @@ static inline void __start_tx(struct uart_port *port)
if (up->dma && !up->dma->tx_dma(up))
return;
- if (serial8250_set_THRI_sier(up)) {
+ if (serial8250_set_THRI(up)) {
if (up->bugs & UART_BUG_TXEN) {
unsigned char lsr;
@@ -1616,7 +1616,7 @@ static void serial8250_disable_ms(struct uart_port *port)
mctrl_gpio_disable_ms(up->gpios);
up->ier &= ~UART_IER_MSI;
- set_ier(up, up->ier);
+ serial8250_set_IER(up, up->ier);
}
static void serial8250_enable_ms(struct uart_port *port)
@@ -1632,7 +1632,7 @@ static void serial8250_enable_ms(struct uart_port *port)
up->ier |= UART_IER_MSI;
serial8250_rpm_get(up);
- set_ier(up, up->ier);
+ serial8250_set_IER(up, up->ier);
serial8250_rpm_put(up);
}
@@ -1991,54 +1991,6 @@ static void wait_for_xmitr(struct uart_8250_port *up, int bits)
}
}
-static atomic_t ier_counter = ATOMIC_INIT(0);
-static atomic_t ier_value = ATOMIC_INIT(0);
-
-void set_ier(struct uart_8250_port *up, unsigned char ier)
-{
- struct uart_port *port = &up->port;
- unsigned int flags;
-
- console_atomic_lock(&flags);
- if (atomic_read(&ier_counter) > 0)
- atomic_set(&ier_value, ier);
- else
- serial_port_out(port, UART_IER, ier);
- console_atomic_unlock(flags);
-}
-
-void clear_ier(struct uart_8250_port *up)
-{
- struct uart_port *port = &up->port;
- unsigned int ier_cleared = 0;
- unsigned int flags;
- unsigned int ier;
-
- console_atomic_lock(&flags);
- atomic_inc(&ier_counter);
- ier = serial_port_in(port, UART_IER);
- if (up->capabilities & UART_CAP_UUE)
- ier_cleared = UART_IER_UUE;
- if (ier != ier_cleared) {
- serial_port_out(port, UART_IER, ier_cleared);
- atomic_set(&ier_value, ier);
- }
- console_atomic_unlock(flags);
-}
-EXPORT_SYMBOL_GPL(clear_ier);
-
-void restore_ier(struct uart_8250_port *up)
-{
- struct uart_port *port = &up->port;
- unsigned int flags;
-
- console_atomic_lock(&flags);
- if (atomic_fetch_dec(&ier_counter) == 1)
- serial_port_out(port, UART_IER, atomic_read(&ier_value));
- console_atomic_unlock(flags);
-}
-EXPORT_SYMBOL_GPL(restore_ier);
-
#ifdef CONFIG_CONSOLE_POLL
/*
* Console polling routines for writing and reading from the uart while
@@ -2070,10 +2022,11 @@ static int serial8250_get_poll_char(struct uart_port *port)
static void serial8250_put_poll_char(struct uart_port *port,
unsigned char c)
{
+ unsigned int ier;
struct uart_8250_port *up = up_to_u8250p(port);
serial8250_rpm_get(up);
- clear_ier(up);
+ ier = serial8250_clear_IER(up);
wait_for_xmitr(up, BOTH_EMPTY);
/*
@@ -2086,7 +2039,7 @@ static void serial8250_put_poll_char(struct uart_port *port,
* and restore the IER
*/
wait_for_xmitr(up, BOTH_EMPTY);
- restore_ier(up);
+ serial8250_set_IER(up, ier);
serial8250_rpm_put(up);
}
@@ -2394,7 +2347,7 @@ void serial8250_do_shutdown(struct uart_port *port)
*/
spin_lock_irqsave(&port->lock, flags);
up->ier = 0;
- set_ier(up, 0);
+ serial8250_set_IER(up, 0);
spin_unlock_irqrestore(&port->lock, flags);
synchronize_irq(port->irq);
@@ -2679,7 +2632,7 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
if (up->capabilities & UART_CAP_RTOIE)
up->ier |= UART_IER_RTOIE;
- set_ier(up, up->ier);
+ serial8250_set_IER(up, up->ier);
if (up->capabilities & UART_CAP_EFR) {
unsigned char efr = 0;
@@ -3189,12 +3142,13 @@ void serial8250_console_write_atomic(struct uart_8250_port *up,
{
struct uart_port *port = &up->port;
unsigned int flags;
+ unsigned int ier;
console_atomic_lock(&flags);
touch_nmi_watchdog();
- clear_ier(up);
+ ier = serial8250_clear_IER(up);
if (atomic_fetch_inc(&up->console_printing)) {
uart_console_write(port, "\n", 1,
@@ -3204,7 +3158,7 @@ void serial8250_console_write_atomic(struct uart_8250_port *up,
atomic_dec(&up->console_printing);
wait_for_xmitr(up, BOTH_EMPTY);
- restore_ier(up);
+ serial8250_set_IER(up, ier);
console_atomic_unlock(flags);
}
@@ -3220,13 +3174,14 @@ void serial8250_console_write(struct uart_8250_port *up, const char *s,
{
struct uart_port *port = &up->port;
unsigned long flags;
+ unsigned int ier;
touch_nmi_watchdog();
serial8250_rpm_get(up);
spin_lock_irqsave(&port->lock, flags);
- clear_ier(up);
+ ier = serial8250_clear_IER(up);
/* check scratch reg to see if port powered off during system sleep */
if (up->canary && (up->canary != serial_port_in(port, UART_SCR))) {
@@ -3243,7 +3198,7 @@ void serial8250_console_write(struct uart_8250_port *up, const char *s,
* and restore the IER
*/
wait_for_xmitr(up, BOTH_EMPTY);
- restore_ier(up);
+ serial8250_set_IER(up, ier);
/*
* The receive handling will happen properly because the
--
2.20.1
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH RT 2/2] serial: 8250: fsl/ingenic/mtk: fix atomic console
2020-01-10 15:39 [PATCH RT 0/2] serial: 8250: atomic console fixups John Ogness
2020-01-10 15:39 ` [PATCH RT 1/2] serial: 8250: only atomic lock for console John Ogness
@ 2020-01-10 15:39 ` John Ogness
2020-01-10 17:36 ` [PATCH RT 0/2] serial: 8250: atomic console fixups Dick Hollenbeck
2 siblings, 0 replies; 4+ messages in thread
From: John Ogness @ 2020-01-10 15:39 UTC (permalink / raw)
To: Sebastian Andrzej Siewior
Cc: Petr Mladek, Sergey Senozhatsky, Dick Hollenbeck, linux-kernel,
linux-rt-users
A few 8250 implementations have their own IER access. If the port
is a console, wrap the accesses with console_atomic_lock.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
---
drivers/tty/serial/8250/8250_fsl.c | 9 ++++++++
drivers/tty/serial/8250/8250_ingenic.c | 7 +++++++
drivers/tty/serial/8250/8250_mtk.c | 29 ++++++++++++++++++++++++--
3 files changed, 43 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_fsl.c b/drivers/tty/serial/8250/8250_fsl.c
index aa0e216d5ead..8f711afadd4b 100644
--- a/drivers/tty/serial/8250/8250_fsl.c
+++ b/drivers/tty/serial/8250/8250_fsl.c
@@ -57,9 +57,18 @@ int fsl8250_handle_irq(struct uart_port *port)
/* Stop processing interrupts on input overrun */
if ((orig_lsr & UART_LSR_OE) && (up->overrun_backoff_time_ms > 0)) {
+ unsigned int ca_flags;
unsigned long delay;
+ bool is_console;
+ is_console = uart_console(port);
+
+ if (is_console)
+ console_atomic_lock(&ca_flags);
up->ier = port->serial_in(port, UART_IER);
+ if (is_console)
+ console_atomic_unlock(ca_flags);
+
if (up->ier & (UART_IER_RLSI | UART_IER_RDI)) {
port->ops->stop_rx(port);
} else {
diff --git a/drivers/tty/serial/8250/8250_ingenic.c b/drivers/tty/serial/8250/8250_ingenic.c
index 424c07c5f629..47f1482bd818 100644
--- a/drivers/tty/serial/8250/8250_ingenic.c
+++ b/drivers/tty/serial/8250/8250_ingenic.c
@@ -146,6 +146,8 @@ OF_EARLYCON_DECLARE(x1000_uart, "ingenic,x1000-uart",
static void ingenic_uart_serial_out(struct uart_port *p, int offset, int value)
{
+ unsigned int flags;
+ bool is_console;
int ier;
switch (offset) {
@@ -167,7 +169,12 @@ static void ingenic_uart_serial_out(struct uart_port *p, int offset, int value)
* If we have enabled modem status IRQs we should enable
* modem mode.
*/
+ is_console = uart_console(p);
+ if (is_console)
+ console_atomic_lock(&flags);
ier = p->serial_in(p, UART_IER);
+ if (is_console)
+ console_atomic_unlock(flags);
if (ier & UART_IER_MSI)
value |= UART_MCR_MDCE | UART_MCR_FCM;
diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c
index 4d067f515f74..b509c3de0301 100644
--- a/drivers/tty/serial/8250/8250_mtk.c
+++ b/drivers/tty/serial/8250/8250_mtk.c
@@ -212,12 +212,37 @@ static void mtk8250_shutdown(struct uart_port *port)
static void mtk8250_disable_intrs(struct uart_8250_port *up, int mask)
{
- serial_out(up, UART_IER, serial_in(up, UART_IER) & (~mask));
+ struct uart_port *port = &up->port;
+ unsigned int flags;
+ unsigned int ier;
+ bool is_console;
+
+ is_console = uart_console(port);
+
+ if (is_console)
+ console_atomic_lock(&flags);
+
+ ier = serial_in(up, UART_IER);
+ serial_out(up, UART_IER, ier & (~mask));
+
+ if (is_console)
+ console_atomic_unlock(flags);
}
static void mtk8250_enable_intrs(struct uart_8250_port *up, int mask)
{
- serial_out(up, UART_IER, serial_in(up, UART_IER) | mask);
+ struct uart_port *port = &up->port;
+ unsigned int flags;
+ unsigned int ier;
+
+ if (uart_console(port))
+ console_atomic_lock(&flags);
+
+ ier = serial_in(up, UART_IER);
+ serial_out(up, UART_IER, ier | mask);
+
+ if (uart_console(port))
+ console_atomic_unlock(flags);
}
static void mtk8250_set_flow_ctrl(struct uart_8250_port *up, int mode)
--
2.20.1
^ permalink raw reply related [flat|nested] 4+ messages in thread* Re: [PATCH RT 0/2] serial: 8250: atomic console fixups
2020-01-10 15:39 [PATCH RT 0/2] serial: 8250: atomic console fixups John Ogness
2020-01-10 15:39 ` [PATCH RT 1/2] serial: 8250: only atomic lock for console John Ogness
2020-01-10 15:39 ` [PATCH RT 2/2] serial: 8250: fsl/ingenic/mtk: fix atomic console John Ogness
@ 2020-01-10 17:36 ` Dick Hollenbeck
2 siblings, 0 replies; 4+ messages in thread
From: Dick Hollenbeck @ 2020-01-10 17:36 UTC (permalink / raw)
To: John Ogness, Sebastian Andrzej Siewior
Cc: Petr Mladek, Sergey Senozhatsky, linux-kernel, linux-rt-users
On 1/10/20 9:39 AM, John Ogness wrote:
> Dick Hollenbeck pointed out[0] that serial usage for non-consoles
> was dramatically affected due to the atomic console
> implementation. Indeed, the implementation was taking the global
> console_atomic_lock for _all_ 8250 ports, regardless if they were
> consoles or not.
>
> This series fixes that by only using the cpu-lock if the port is
> a console. While making those changes, I realized that the clear
> counter/ier-cache is not needed, so that is also removed.
>
> Dick also pointed out that the IER accessor functions were using
> non-typical names. These are updated and moved to inline macros.
>
> Finally, I noticed that the fsl, ingenic, and mtk variants were
> directly accessing IER. These are now also appropriately wrapped.
>
> In his suggestion, Dick did optimizations regarding IER caching.
> However, these are _not_ included because they may have some
> unwanted side-effects. For example,
> I noticed a few places in
> 8250 code where the value of uart_8250_port->ier is expected to
> be different than the hardware register.
Sure, its not a trivial change, but I still think it would be superior to try and get it
right. But I certainly have no more influence than the prior sentence.
I see this as unfortunate, and a propagation of a weak original design which stems from a
time when inline C functions were not even available.
If serial8250_set_IER() function returned the prior value, it could be saved on the stack and still be an indication of difference from the current hardware for the temporary situation at hand.
Then, the compiler would have had a better chance of optimizing out the return value when it is not needed, because it would be a mere reading of the prior value from the struct.
I know I expressed some concern about using *3* functions, set, clear, and restore before, when 2 might suffice. However we've seen other situations where a clear and restore are used, such as interrupt flags.
( "set" is a mere lower level common gateway to the hardware in our context.) So down the road, a clear() and restore() may give you the option to do some locking and unlocking, which I know you don't currently think you need. Pardon me for un-weighting my concern for 3 functions.
It is certainly a major improvement. To be honest, I will probably simply comment out the console support in the inline function when and if I ever upgrade my code. I like that its inline, and that its in a single function.
Dick
^ permalink raw reply [flat|nested] 4+ messages in thread