From: Ran Bi <ran.bi@mediatek.com>
To: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Cc: Lee Jones <lee.jones@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
"Mark Brown" <broonie@kernel.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
"Mark Rutland" <mark.rutland@arm.com>,
Alessandro Zummo <a.zummo@towertech.it>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
<srv_heupstream@mediatek.com>, <devicetree@vger.kernel.org>,
Sean Wang <sean.wang@mediatek.com>,
Liam Girdwood <lgirdwood@gmail.com>,
<linux-kernel@vger.kernel.org>,
<linux-mediatek@lists.infradead.org>,
<linux-arm-kernel@lists.infradead.org>,
Eddie Huang <eddie.huang@mediatek.com>,
<linux-rtc@vger.kernel.org>
Subject: Re: [PATCH v3 08/10] arm64: dts: mt6358: add PMIC MT6358 related nodes
Date: Wed, 8 May 2019 16:00:39 +0800 [thread overview]
Message-ID: <1557302439.22641.4.camel@mhfsdcap03> (raw)
In-Reply-To: <20190503093117.54830-9-hsin-hsiung.wang@mediatek.com>
On Fri, 2019-05-03 at 17:31 +0800, Hsin-Hsiung Wang wrote:
> add PMIC MT6358 related nodes which is for MT8183 platform
>
> Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
> ---
> arch/arm64/boot/dts/mediatek/mt6358.dtsi | 358 +++++++++++++++++++++++
> 1 file changed, 358 insertions(+)
> create mode 100644 arch/arm64/boot/dts/mediatek/mt6358.dtsi
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt6358.dtsi b/arch/arm64/boot/dts/mediatek/mt6358.dtsi
> new file mode 100644
> index 000000000000..74da59de3794
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt6358.dtsi
> @@ -0,0 +1,358 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright (c) 2019 MediaTek Inc.
> + */
> +
> +&pwrap {
> + pmic: mt6358 {
> + compatible = "mediatek,mt6358";
> + interrupt-controller;
> + interrupt-parent = <&pio>;
> + interrupts = <182 IRQ_TYPE_LEVEL_HIGH>;
> + #interrupt-cells = <2>;
> +
> + mt6358codec: mt6358codec {
> + compatible = "mediatek,mt6358-sound";
> + };
> +
> + mt6358regulator: mt6358regulator {
> + compatible = "mediatek,mt6358-regulator";
> +
> + mt6358_vdram1_reg: buck_vdram1 {
> + regulator-compatible = "buck_vdram1";
> + regulator-name = "vdram1";
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <2087500>;
> + regulator-ramp-delay = <12500>;
> + regulator-enable-ramp-delay = <0>;
> + regulator-always-on;
> + regulator-allowed-modes = <0 1>;
> + };
> +
> + mt6358_vcore_reg: buck_vcore {
> + regulator-name = "vcore";
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <1293750>;
> + regulator-ramp-delay = <6250>;
> + regulator-enable-ramp-delay = <200>;
> + regulator-always-on;
> + regulator-allowed-modes = <0 1>;
> + };
> +
> + mt6358_vpa_reg: buck_vpa {
> + regulator-name = "vpa";
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <3650000>;
> + regulator-ramp-delay = <50000>;
> + regulator-enable-ramp-delay = <250>;
> + regulator-allowed-modes = <0 1>;
> + };
> +
> + mt6358_vproc11_reg: buck_vproc11 {
> + regulator-name = "vproc11";
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <1293750>;
> + regulator-ramp-delay = <6250>;
> + regulator-enable-ramp-delay = <200>;
> + regulator-always-on;
> + regulator-allowed-modes = <0 1>;
> + };
> +
> + mt6358_vproc12_reg: buck_vproc12 {
> + regulator-name = "vproc12";
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <1293750>;
> + regulator-ramp-delay = <6250>;
> + regulator-enable-ramp-delay = <200>;
> + regulator-always-on;
> + regulator-allowed-modes = <0 1>;
> + };
> +
> + mt6358_vgpu_reg: buck_vgpu {
> + regulator-name = "vgpu";
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <1293750>;
> + regulator-ramp-delay = <6250>;
> + regulator-enable-ramp-delay = <200>;
> + regulator-allowed-modes = <0 1>;
> + };
> +
> + mt6358_vs2_reg: buck_vs2 {
> + regulator-name = "vs2";
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <2087500>;
> + regulator-ramp-delay = <12500>;
> + regulator-enable-ramp-delay = <0>;
> + regulator-always-on;
> + };
> +
> + mt6358_vmodem_reg: buck_vmodem {
> + regulator-name = "vmodem";
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <1293750>;
> + regulator-ramp-delay = <6250>;
> + regulator-enable-ramp-delay = <900>;
> + regulator-always-on;
> + regulator-allowed-modes = <0 1>;
> + };
> +
> + mt6358_vs1_reg: buck_vs1 {
> + regulator-name = "vs1";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <2587500>;
> + regulator-ramp-delay = <12500>;
> + regulator-enable-ramp-delay = <0>;
> + regulator-always-on;
> + };
> +
> + mt6358_vdram2_reg: ldo_vdram2 {
> + regulator-name = "vdram2";
> + regulator-min-microvolt = <600000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-enable-ramp-delay = <3300>;
> + };
> +
> + mt6358_vsim1_reg: ldo_vsim1 {
> + regulator-name = "vsim1";
> + regulator-min-microvolt = <1700000>;
> + regulator-max-microvolt = <3100000>;
> + regulator-enable-ramp-delay = <540>;
> + };
> +
> + mt6358_vibr_reg: ldo_vibr {
> + regulator-name = "vibr";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-enable-ramp-delay = <60>;
> + };
> +
> + mt6358_vrf12_reg: ldo_vrf12 {
> + compatible = "regulator-fixed";
> + regulator-name = "vrf12";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-enable-ramp-delay = <120>;
> + };
> +
> + mt6358_vio18_reg: ldo_vio18 {
> + compatible = "regulator-fixed";
> + regulator-name = "vio18";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-enable-ramp-delay = <2700>;
> + regulator-always-on;
> + };
> +
> + mt6358_vusb_reg: ldo_vusb {
> + regulator-name = "vusb";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3100000>;
> + regulator-enable-ramp-delay = <270>;
> + regulator-always-on;
> + };
> +
> + mt6358_vcamio_reg: ldo_vcamio {
> + compatible = "regulator-fixed";
> + regulator-name = "vcamio";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-enable-ramp-delay = <270>;
> + };
> +
> + mt6358_vcamd_reg: ldo_vcamd {
> + regulator-name = "vcamd";
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-enable-ramp-delay = <270>;
> + };
> +
> + mt6358_vcn18_reg: ldo_vcn18 {
> + compatible = "regulator-fixed";
> + regulator-name = "vcn18";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-enable-ramp-delay = <270>;
> + };
> +
> + mt6358_vfe28_reg: ldo_vfe28 {
> + compatible = "regulator-fixed";
> + regulator-name = "vfe28";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-enable-ramp-delay = <270>;
> + };
> +
> + mt6358_vsram_proc11_reg: ldo_vsram_proc11 {
> + regulator-name = "vsram_proc11";
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <1293750>;
> + regulator-ramp-delay = <6250>;
> + regulator-enable-ramp-delay = <240>;
> + regulator-always-on;
> + };
> +
> + mt6358_vcn28_reg: ldo_vcn28 {
> + compatible = "regulator-fixed";
> + regulator-name = "vcn28";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-enable-ramp-delay = <270>;
> + };
> +
> + mt6358_vsram_others_reg: ldo_vsram_others {
> + regulator-name = "vsram_others";
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <1293750>;
> + regulator-ramp-delay = <6250>;
> + regulator-enable-ramp-delay = <240>;
> + regulator-always-on;
> + };
> +
> + mt6358_vsram_gpu_reg: ldo_vsram_gpu {
> + regulator-name = "vsram_gpu";
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <1293750>;
> + regulator-ramp-delay = <6250>;
> + regulator-enable-ramp-delay = <240>;
> + };
> +
> + mt6358_vxo22_reg: ldo_vxo22 {
> + compatible = "regulator-fixed";
> + regulator-name = "vxo22";
> + regulator-min-microvolt = <2200000>;
> + regulator-max-microvolt = <2200000>;
> + regulator-enable-ramp-delay = <120>;
> + regulator-always-on;
> + };
> +
> + mt6358_vefuse_reg: ldo_vefuse {
> + regulator-name = "vefuse";
> + regulator-min-microvolt = <1700000>;
> + regulator-max-microvolt = <1900000>;
> + regulator-enable-ramp-delay = <270>;
> + };
> +
> + mt6358_vaux18_reg: ldo_vaux18 {
> + compatible = "regulator-fixed";
> + regulator-name = "vaux18";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-enable-ramp-delay = <270>;
> + };
> +
> + mt6358_vmch_reg: ldo_vmch {
> + regulator-name = "vmch";
> + regulator-min-microvolt = <2900000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-enable-ramp-delay = <60>;
> + };
> +
> + mt6358_vbif28_reg: ldo_vbif28 {
> + compatible = "regulator-fixed";
> + regulator-name = "vbif28";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-enable-ramp-delay = <270>;
> + };
> +
> + mt6358_vsram_proc12_reg: ldo_vsram_proc12 {
> + regulator-name = "vsram_proc12";
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <1293750>;
> + regulator-ramp-delay = <6250>;
> + regulator-enable-ramp-delay = <240>;
> + regulator-always-on;
> + };
> +
> + mt6358_vcama1_reg: ldo_vcama1 {
> + regulator-name = "vcama1";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-enable-ramp-delay = <270>;
> + };
> +
> + mt6358_vemc_reg: ldo_vemc {
> + regulator-name = "vemc";
> + regulator-min-microvolt = <2900000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-enable-ramp-delay = <60>;
> + regulator-always-on;
> + };
> +
> + mt6358_vio28_reg: ldo_vio28 {
> + compatible = "regulator-fixed";
> + regulator-name = "vio28";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-enable-ramp-delay = <270>;
> + };
> +
> + mt6358_va12_reg: ldo_va12 {
> + compatible = "regulator-fixed";
> + regulator-name = "va12";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-enable-ramp-delay = <270>;
> + regulator-always-on;
> + };
> +
> + mt6358_vrf18_reg: ldo_vrf18 {
> + compatible = "regulator-fixed";
> + regulator-name = "vrf18";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-enable-ramp-delay = <120>;
> + };
> +
> + mt6358_vcn33_bt_reg: ldo_vcn33_bt {
> + regulator-name = "vcn33_bt";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3500000>;
> + regulator-enable-ramp-delay = <270>;
> + };
> +
> + mt6358_vcn33_wifi_reg: ldo_vcn33_wifi {
> + regulator-name = "vcn33_wifi";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3500000>;
> + regulator-enable-ramp-delay = <270>;
> + };
> +
> + mt6358_vcama2_reg: ldo_vcama2 {
> + regulator-name = "vcama2";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-enable-ramp-delay = <270>;
> + };
> +
> + mt6358_vmc_reg: ldo_vmc {
> + regulator-name = "vmc";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-enable-ramp-delay = <60>;
> + };
> +
> + mt6358_vldo28_reg: ldo_vldo28 {
> + regulator-name = "vldo28";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-enable-ramp-delay = <270>;
> + };
> +
> + mt6358_vaud28_reg: ldo_vaud28 {
> + compatible = "regulator-fixed";
> + regulator-name = "vaud28";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-enable-ramp-delay = <270>;
> + };
> +
> + mt6358_vsim2_reg: ldo_vsim2 {
> + regulator-name = "vsim2";
> + regulator-min-microvolt = <1700000>;
> + regulator-max-microvolt = <3100000>;
> + regulator-enable-ramp-delay = <540>;
> + };
> + };
Missing mt6358 rtc node here:
+ mt6358rtc: mt6358rtc {
+ compatible = "mediatek,mt6358-rtc";
+ };
> + };
> +};
next prev parent reply other threads:[~2019-05-08 8:00 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-03 9:31 [PATCH v3 00/10] Add Support for MediaTek PMIC MT6358 Hsin-Hsiung Wang
2019-05-03 9:31 ` [PATCH v3 01/10] mfd: mt6397: clean up code Hsin-Hsiung Wang
2019-05-03 9:31 ` [PATCH v3 02/10] mfd: mt6397: extract irq related code from core driver Hsin-Hsiung Wang
2019-05-07 5:11 ` Nicolas Boichat
2019-05-07 5:16 ` Nicolas Boichat
2019-05-03 9:31 ` [PATCH v3 03/10] mfd: mt6397: modify suspend/resume behavior Hsin-Hsiung Wang
2019-05-03 9:31 ` [PATCH v3 04/10] dt-bindings: mfd: Add compatible for the MediaTek MT6358 PMIC Hsin-Hsiung Wang
2019-05-07 5:24 ` Nicolas Boichat
2019-08-02 13:28 ` Hsin-hsiung Wang
2019-05-13 15:04 ` Rob Herring
2019-05-03 9:31 ` [PATCH v3 05/10] regulator: Add document for MT6358 regulator Hsin-Hsiung Wang
2019-05-13 15:06 ` Rob Herring
2019-05-03 9:31 ` [PATCH v3 06/10] mfd: Add support for the MediaTek MT6358 PMIC Hsin-Hsiung Wang
2019-05-07 5:34 ` Nicolas Boichat
2019-05-03 9:31 ` [PATCH v3 07/10] regulator: mt6358: Add support for MT6358 regulator Hsin-Hsiung Wang
2019-05-06 3:37 ` Mark Brown
2019-05-07 5:40 ` Nicolas Boichat
2019-05-03 9:31 ` [PATCH v3 08/10] arm64: dts: mt6358: add PMIC MT6358 related nodes Hsin-Hsiung Wang
2019-05-08 8:00 ` Ran Bi [this message]
2019-05-03 9:31 ` [PATCH v3 09/10] rtc: mt6397: fix alarm register overwrite Hsin-Hsiung Wang
2019-05-03 9:31 ` [PATCH v3 10/10] rtc: Add support for the MediaTek MT6358 RTC Hsin-Hsiung Wang
2019-05-04 14:04 ` Yingjoe Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1557302439.22641.4.camel@mhfsdcap03 \
--to=ran.bi@mediatek.com \
--cc=a.zummo@towertech.it \
--cc=alexandre.belloni@bootlin.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=eddie.huang@mediatek.com \
--cc=hsin-hsiung.wang@mediatek.com \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-rtc@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=matthias.bgg@gmail.com \
--cc=robh+dt@kernel.org \
--cc=sean.wang@mediatek.com \
--cc=srv_heupstream@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).