* [PATCH 0/8] soc: amlogic: switch bindings to yaml and adjust some dtbs's
@ 2023-01-23 21:22 Heiner Kallweit
2023-01-23 21:23 ` [PATCH 1/8] arm64: dts: meson-gx: Remove invalid pwm compatible Heiner Kallweit
` (11 more replies)
0 siblings, 12 replies; 26+ messages in thread
From: Heiner Kallweit @ 2023-01-23 21:22 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Neil Armstrong, Kevin Hilman,
Jerome Brunet, Martin Blumenstingl, Alessandro Zummo,
Alexandre Belloni, Thierry Reding, Uwe Kleine-König,
Thomas Gleixner, Marc Zyngier, Linus Walleij
Cc: devicetree, linux-arm-kernel, open list:ARM/Amlogic Meson...,
linux-pwm, linux-rtc, linux-gpio
At first adjust some existing dtbs's so that they pass dtbs_check
after switching bindings to yaml.
Then switch further Amlogic Meson bindings to yaml.
Tested with make targets dt_binding_check and dtbs_check.
Heiner Kallweit (8):
arm64: dts: meson-gx: Remove invalid pwm compatible
arm64: dts: amlogic: Fix non-compliant SD/SDIO node names
arm64: dts: meson-gx: Set only one compatible string for mmc
arm64: dts: amlogic: Remove invalid compatible string
amlogic,meson-gpio-intc
dt-bindings: rtc: Add Amlogic Meson vrtc controller binding
dt-bindings: pwm: Add Amlogic Meson PWM binding
dt-bindings: interrupt-controller: Add Amlogic Meson GPIO interrupt
controller binding
dt-bindings: pinctrl: Add Amlogic Meson pinctrl binding
.../amlogic,meson-gpio-intc.txt | 38 ------
.../amlogic,meson-gpio-intc.yaml | 72 +++++++++++
.../pinctrl/amlogic,meson-pinctrl.yaml | 121 ++++++++++++++++++
.../bindings/pinctrl/meson,pinctrl.txt | 94 --------------
.../devicetree/bindings/pwm/pwm-amlogic.yaml | 61 +++++++++
.../devicetree/bindings/pwm/pwm-meson.txt | 29 -----
.../bindings/rtc/amlogic,meson-vrtc.yaml | 50 ++++++++
.../bindings/rtc/rtc-meson-vrtc.txt | 22 ----
arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 5 +-
.../boot/dts/amlogic/meson-g12-common.dtsi | 7 +-
arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 15 +--
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 3 +-
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 3 +-
arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 3 +-
arch/arm64/boot/dts/amlogic/meson-sm1.dtsi | 3 +-
15 files changed, 320 insertions(+), 206 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl.yaml
delete mode 100644 Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
create mode 100644 Documentation/devicetree/bindings/pwm/pwm-amlogic.yaml
delete mode 100644 Documentation/devicetree/bindings/pwm/pwm-meson.txt
create mode 100644 Documentation/devicetree/bindings/rtc/amlogic,meson-vrtc.yaml
delete mode 100644 Documentation/devicetree/bindings/rtc/rtc-meson-vrtc.txt
--
2.39.1
^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH 1/8] arm64: dts: meson-gx: Remove invalid pwm compatible
2023-01-23 21:22 [PATCH 0/8] soc: amlogic: switch bindings to yaml and adjust some dtbs's Heiner Kallweit
@ 2023-01-23 21:23 ` Heiner Kallweit
2023-01-23 21:24 ` [PATCH 2/8] arm64: dts: amlogic: Fix non-compliant SD/SDIO node names Heiner Kallweit
` (10 subsequent siblings)
11 siblings, 0 replies; 26+ messages in thread
From: Heiner Kallweit @ 2023-01-23 21:23 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Neil Armstrong, Kevin Hilman,
Jerome Brunet, Martin Blumenstingl, Alessandro Zummo,
Alexandre Belloni, Thierry Reding, Uwe Kleine-König,
Thomas Gleixner, Marc Zyngier, Linus Walleij
Cc: devicetree, linux-arm-kernel, open list:ARM/Amlogic Meson...,
linux-pwm, linux-rtc, linux-gpio
amlogic,meson-gx-pwm isn't a valid compatible string, so remove it.
See drivers/pwm/pwm-meson.c.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index a79a35e84..75d35dcfe 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -328,14 +328,14 @@ i2c_A: i2c@8500 {
};
pwm_ab: pwm@8550 {
- compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
+ compatible = "amlogic,meson-gxbb-pwm";
reg = <0x0 0x08550 0x0 0x10>;
#pwm-cells = <3>;
status = "disabled";
};
pwm_cd: pwm@8650 {
- compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
+ compatible = "amlogic,meson-gxbb-pwm";
reg = <0x0 0x08650 0x0 0x10>;
#pwm-cells = <3>;
status = "disabled";
@@ -350,7 +350,7 @@ saradc: adc@8680 {
};
pwm_ef: pwm@86c0 {
- compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
+ compatible = "amlogic,meson-gxbb-pwm";
reg = <0x0 0x086c0 0x0 0x10>;
#pwm-cells = <3>;
status = "disabled";
@@ -497,7 +497,7 @@ i2c_AO: i2c@500 {
};
pwm_AO_ab: pwm@550 {
- compatible = "amlogic,meson-gx-ao-pwm", "amlogic,meson-gxbb-ao-pwm";
+ compatible = "amlogic,meson-gxbb-ao-pwm";
reg = <0x0 0x00550 0x0 0x10>;
#pwm-cells = <3>;
status = "disabled";
--
2.39.1
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH 2/8] arm64: dts: amlogic: Fix non-compliant SD/SDIO node names
2023-01-23 21:22 [PATCH 0/8] soc: amlogic: switch bindings to yaml and adjust some dtbs's Heiner Kallweit
2023-01-23 21:23 ` [PATCH 1/8] arm64: dts: meson-gx: Remove invalid pwm compatible Heiner Kallweit
@ 2023-01-23 21:24 ` Heiner Kallweit
2023-01-24 7:17 ` Neil Armstrong
2023-01-23 21:25 ` [PATCH 3/8] arm64: dts: meson-gx: Set only one compatible string for mmc Heiner Kallweit
` (9 subsequent siblings)
11 siblings, 1 reply; 26+ messages in thread
From: Heiner Kallweit @ 2023-01-23 21:24 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Neil Armstrong, Kevin Hilman,
Jerome Brunet, Martin Blumenstingl, Alessandro Zummo,
Alexandre Belloni, Thierry Reding, Uwe Kleine-König,
Thomas Gleixner, Marc Zyngier, Linus Walleij
Cc: devicetree, linux-arm-kernel, open list:ARM/Amlogic Meson...,
linux-pwm, linux-rtc, linux-gpio
mmc-controller.yaml defines "^mmc(@.*)?$" as node name pattern.
In preparation of adding schema-based validation fix the node name
in two affected files.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 2 +-
arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index 1648e67af..ed895fb32 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -1883,7 +1883,7 @@ apb: bus@ffe00000 {
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x200000>;
- sd_emmc_b: sd@5000 {
+ sd_emmc_b: mmc@5000 {
compatible = "amlogic,meson-axg-mmc";
reg = <0x0 0x5000 0x0 0x800>;
interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 1a931d5c2..80d82f739 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -2321,7 +2321,7 @@ uart_A: serial@24000 {
};
};
- sd_emmc_a: sd@ffe03000 {
+ sd_emmc_a: mmc@ffe03000 {
compatible = "amlogic,meson-axg-mmc";
reg = <0x0 0xffe03000 0x0 0x800>;
interrupts = <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>;
@@ -2333,7 +2333,7 @@ sd_emmc_a: sd@ffe03000 {
resets = <&reset RESET_SD_EMMC_A>;
};
- sd_emmc_b: sd@ffe05000 {
+ sd_emmc_b: mmc@ffe05000 {
compatible = "amlogic,meson-axg-mmc";
reg = <0x0 0xffe05000 0x0 0x800>;
interrupts = <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>;
--
2.39.1
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH 3/8] arm64: dts: meson-gx: Set only one compatible string for mmc
2023-01-23 21:22 [PATCH 0/8] soc: amlogic: switch bindings to yaml and adjust some dtbs's Heiner Kallweit
2023-01-23 21:23 ` [PATCH 1/8] arm64: dts: meson-gx: Remove invalid pwm compatible Heiner Kallweit
2023-01-23 21:24 ` [PATCH 2/8] arm64: dts: amlogic: Fix non-compliant SD/SDIO node names Heiner Kallweit
@ 2023-01-23 21:25 ` Heiner Kallweit
2023-01-23 21:27 ` [PATCH 4/8] arm64: dts: amlogic: Remove invalid compatible string amlogic,meson-gpio-intc Heiner Kallweit
` (8 subsequent siblings)
11 siblings, 0 replies; 26+ messages in thread
From: Heiner Kallweit @ 2023-01-23 21:25 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Neil Armstrong, Kevin Hilman,
Jerome Brunet, Martin Blumenstingl, Alessandro Zummo,
Alexandre Belloni, Thierry Reding, Uwe Kleine-König,
Thomas Gleixner, Marc Zyngier, Linus Walleij
Cc: devicetree, linux-arm-kernel, open list:ARM/Amlogic Meson...,
linux-pwm, linux-rtc, linux-gpio
In preparation of schema-based validation use one compatible string only.
Both are aliases anyway.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index 75d35dcfe..c0a311da4 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -601,21 +601,21 @@ apb: apb@d0000000 {
ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>;
sd_emmc_a: mmc@70000 {
- compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
+ compatible = "amlogic,meson-gx-mmc";
reg = <0x0 0x70000 0x0 0x800>;
interrupts = <GIC_SPI 216 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
};
sd_emmc_b: mmc@72000 {
- compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
+ compatible = "amlogic,meson-gx-mmc";
reg = <0x0 0x72000 0x0 0x800>;
interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
};
sd_emmc_c: mmc@74000 {
- compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
+ compatible = "amlogic,meson-gx-mmc";
reg = <0x0 0x74000 0x0 0x800>;
interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
--
2.39.1
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH 4/8] arm64: dts: amlogic: Remove invalid compatible string amlogic,meson-gpio-intc
2023-01-23 21:22 [PATCH 0/8] soc: amlogic: switch bindings to yaml and adjust some dtbs's Heiner Kallweit
` (2 preceding siblings ...)
2023-01-23 21:25 ` [PATCH 3/8] arm64: dts: meson-gx: Set only one compatible string for mmc Heiner Kallweit
@ 2023-01-23 21:27 ` Heiner Kallweit
2023-01-23 21:28 ` [PATCH 5/8] dt-bindings: rtc: Add Amlogic Meson vrtc controller binding Heiner Kallweit
` (7 subsequent siblings)
11 siblings, 0 replies; 26+ messages in thread
From: Heiner Kallweit @ 2023-01-23 21:27 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Neil Armstrong, Kevin Hilman,
Jerome Brunet, Martin Blumenstingl, Alessandro Zummo,
Alexandre Belloni, Thierry Reding, Uwe Kleine-König,
Thomas Gleixner, Marc Zyngier, Linus Walleij
Cc: devicetree, linux-arm-kernel, open list:ARM/Amlogic Meson...,
linux-pwm, linux-rtc, linux-gpio
Remove invalid compatible string amlogic,meson-gpio-intc.
See drivers/irqchip/irq-meson-gpio.c
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 3 +--
arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 3 +--
arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 1 -
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 3 +--
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 3 +--
arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 3 +--
arch/arm64/boot/dts/amlogic/meson-sm1.dtsi | 3 +--
7 files changed, 6 insertions(+), 13 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index ed895fb32..4ee4d0089 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -1761,8 +1761,7 @@ reset: reset-controller@1004 {
};
gpio_intc: interrupt-controller@f080 {
- compatible = "amlogic,meson-axg-gpio-intc",
- "amlogic,meson-gpio-intc";
+ compatible = "amlogic,meson-axg-gpio-intc";
reg = <0x0 0xf080 0x0 0x10>;
interrupt-controller;
#interrupt-cells = <2>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 80d82f739..9bf81e51e 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -2179,8 +2179,7 @@ reset: reset-controller@1004 {
};
gpio_intc: interrupt-controller@f080 {
- compatible = "amlogic,meson-g12a-gpio-intc",
- "amlogic,meson-gpio-intc";
+ compatible = "amlogic,meson-g12a-gpio-intc";
reg = <0x0 0xf080 0x0 0x10>;
interrupt-controller;
#interrupt-cells = <2>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index c0a311da4..86865daf7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -278,7 +278,6 @@ cbus: bus@c1100000 {
ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>;
gpio_intc: interrupt-controller@9880 {
- compatible = "amlogic,meson-gpio-intc";
reg = <0x0 0x9880 0x0 0x10>;
interrupt-controller;
#interrupt-cells = <2>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index 923d2d8bb..8d8fdad6a 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -300,8 +300,7 @@ ðmac {
};
&gpio_intc {
- compatible = "amlogic,meson-gpio-intc",
- "amlogic,meson-gxbb-gpio-intc";
+ compatible = "amlogic,meson-gxbb-gpio-intc";
status = "okay";
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index 04e9d0f1b..5a8f47313 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -312,8 +312,7 @@ &clkc_AO {
};
&gpio_intc {
- compatible = "amlogic,meson-gpio-intc",
- "amlogic,meson-gxl-gpio-intc";
+ compatible = "amlogic,meson-gxl-gpio-intc";
status = "okay";
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
index ad50cba42..6b74a6995 100644
--- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
@@ -109,8 +109,7 @@ gpio: bank@4000 {
};
gpio_intc: interrupt-controller@4080 {
- compatible = "amlogic,meson-s4-gpio-intc",
- "amlogic,meson-gpio-intc";
+ compatible = "amlogic,meson-s4-gpio-intc";
reg = <0x0 0x4080 0x0 0x20>;
interrupt-controller;
#interrupt-cells = <2>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
index 617d322af..733a5d578 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
@@ -513,8 +513,7 @@ ðmac {
};
&gpio_intc {
- compatible = "amlogic,meson-sm1-gpio-intc",
- "amlogic,meson-gpio-intc";
+ compatible = "amlogic,meson-sm1-gpio-intc";
};
&pcie {
--
2.39.1
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH 5/8] dt-bindings: rtc: Add Amlogic Meson vrtc controller binding
2023-01-23 21:22 [PATCH 0/8] soc: amlogic: switch bindings to yaml and adjust some dtbs's Heiner Kallweit
` (3 preceding siblings ...)
2023-01-23 21:27 ` [PATCH 4/8] arm64: dts: amlogic: Remove invalid compatible string amlogic,meson-gpio-intc Heiner Kallweit
@ 2023-01-23 21:28 ` Heiner Kallweit
2023-01-25 19:19 ` Rob Herring
2023-01-23 21:29 ` [PATCH 6/8] dt-bindings: pwm: Add Amlogic Meson PWM binding Heiner Kallweit
` (6 subsequent siblings)
11 siblings, 1 reply; 26+ messages in thread
From: Heiner Kallweit @ 2023-01-23 21:28 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Neil Armstrong, Kevin Hilman,
Jerome Brunet, Martin Blumenstingl, Alessandro Zummo,
Alexandre Belloni, Thierry Reding, Uwe Kleine-König,
Thomas Gleixner, Marc Zyngier, Linus Walleij
Cc: devicetree, linux-arm-kernel, open list:ARM/Amlogic Meson...,
linux-pwm, linux-rtc, linux-gpio
Add Amlogic Meson vrtc controller binding.
Tested with make targets dt_binding_check and dtbs_check.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
.../bindings/rtc/amlogic,meson-vrtc.yaml | 50 +++++++++++++++++++
.../bindings/rtc/rtc-meson-vrtc.txt | 22 --------
2 files changed, 50 insertions(+), 22 deletions(-)
create mode 100644 Documentation/devicetree/bindings/rtc/amlogic,meson-vrtc.yaml
delete mode 100644 Documentation/devicetree/bindings/rtc/rtc-meson-vrtc.txt
diff --git a/Documentation/devicetree/bindings/rtc/amlogic,meson-vrtc.yaml b/Documentation/devicetree/bindings/rtc/amlogic,meson-vrtc.yaml
new file mode 100644
index 000000000..26a70b3ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/amlogic,meson-vrtc.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/amlogic,meson-vrtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Virtual RTC (VRTC)
+
+maintainers:
+ - Neil Armstrong <neil.armstrong@linaro.org>
+
+description: |
+ This is a Linux interface to an RTC managed by firmware, hence it's
+ virtual from a Linux perspective. The interface is 1 register where
+ an alarm time (in seconds) is to be written.
+ The alarm register is a simple scratch register shared between the
+ application processors (AP) and the secure co-processor (SCP.) When
+ the AP suspends, the SCP will use the value of this register to
+ program an always-on timer before going sleep. When the timer expires,
+ the SCP will wake up and will then wake the AP.
+
+allOf:
+ - $ref: rtc.yaml#
+
+properties:
+ compatible:
+ enum:
+ - amlogic,meson-vrtc
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ bus@ff800000 {
+ reg = <0x0 0xff800000 0x0 0x100000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ rtc@a8 {
+ compatible = "amlogic,meson-vrtc";
+ reg = <0x0 0x000a8 0x0 0x4>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/rtc/rtc-meson-vrtc.txt b/Documentation/devicetree/bindings/rtc/rtc-meson-vrtc.txt
deleted file mode 100644
index c014f54a9..000000000
--- a/Documentation/devicetree/bindings/rtc/rtc-meson-vrtc.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-* Amlogic Virtual RTC (VRTC)
-
-This is a Linux interface to an RTC managed by firmware, hence it's
-virtual from a Linux perspective. The interface is 1 register where
-an alarm time (in seconds) is to be written.
-
-Required properties:
-- compatible: should be "amlogic,meson-vrtc"
-- reg: physical address for the alarm register
-
-The alarm register is a simple scratch register shared between the
-application processors (AP) and the secure co-processor (SCP.) When
-the AP suspends, the SCP will use the value of this register to
-program an always-on timer before going sleep. When the timer expires,
-the SCP will wake up and will then wake the AP.
-
-Example:
-
- vrtc: rtc@0a8 {
- compatible = "amlogic,meson-vrtc";
- reg = <0x0 0x000a8 0x0 0x4>;
- };
--
2.39.1
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH 6/8] dt-bindings: pwm: Add Amlogic Meson PWM binding
2023-01-23 21:22 [PATCH 0/8] soc: amlogic: switch bindings to yaml and adjust some dtbs's Heiner Kallweit
` (4 preceding siblings ...)
2023-01-23 21:28 ` [PATCH 5/8] dt-bindings: rtc: Add Amlogic Meson vrtc controller binding Heiner Kallweit
@ 2023-01-23 21:29 ` Heiner Kallweit
2023-01-24 1:22 ` Rob Herring
2023-01-25 19:22 ` Rob Herring
2023-01-23 21:30 ` [PATCH 7/8] dt-bindings: interrupt-controller: Add Amlogic Meson GPIO interrupt controller binding Heiner Kallweit
` (5 subsequent siblings)
11 siblings, 2 replies; 26+ messages in thread
From: Heiner Kallweit @ 2023-01-23 21:29 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Neil Armstrong, Kevin Hilman,
Jerome Brunet, Martin Blumenstingl, Alessandro Zummo,
Alexandre Belloni, Thierry Reding, Uwe Kleine-König,
Thomas Gleixner, Marc Zyngier, Linus Walleij
Cc: devicetree, linux-arm-kernel, open list:ARM/Amlogic Meson...,
linux-pwm, linux-rtc, linux-gpio
Add Amlogic Meson PWM binding.
Tested with make targets dt_binding_check and dtbs_check.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
.../devicetree/bindings/pwm/pwm-amlogic.yaml | 61 +++++++++++++++++++
.../devicetree/bindings/pwm/pwm-meson.txt | 29 ---------
2 files changed, 61 insertions(+), 29 deletions(-)
create mode 100644 Documentation/devicetree/bindings/pwm/pwm-amlogic.yaml
delete mode 100644 Documentation/devicetree/bindings/pwm/pwm-meson.txt
diff --git a/Documentation/devicetree/bindings/pwm/pwm-amlogic.yaml b/Documentation/devicetree/bindings/pwm/pwm-amlogic.yaml
new file mode 100644
index 000000000..443ff4e5b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/pwm-amlogic.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/pwm-amlogic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic PWM
+
+maintainers:
+ - Heiner Kallweit <hkallweit1@gmail.com>
+
+allOf:
+ - $ref: pwm.yaml#
+
+properties:
+ compatible:
+ enum:
+ - amlogic,meson8b-pwm
+ - amlogic,meson-gxbb-pwm
+ - amlogic,meson-gxbb-ao-pwm
+ - amlogic,meson-axg-ee-pwm
+ - amlogic,meson-axg-ao-pwm
+ - amlogic,meson-g12a-ee-pwm
+ - amlogic,meson-g12a-ao-pwm-ab
+ - amlogic,meson-g12a-ao-pwm-cd
+ - amlogic,meson-s4-pwm
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+
+ clock-names:
+ minItems: 1
+ maxItems: 2
+
+ "#pwm-cells":
+ const: 3
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ apb@fe000000 {
+ reg = <0x0 0xfe000000 0x0 0x480000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pwm@8550 {
+ compatible = "amlogic,meson-gxbb-pwm";
+ reg = <0x0 0x08550 0x0 0x10>;
+ clocks = <&xtal>, <&xtal>;
+ clock-names = "clkin0", "clkin1";
+ #pwm-cells = <3>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pwm/pwm-meson.txt b/Documentation/devicetree/bindings/pwm/pwm-meson.txt
deleted file mode 100644
index bd02b0a14..000000000
--- a/Documentation/devicetree/bindings/pwm/pwm-meson.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-Amlogic Meson PWM Controller
-============================
-
-Required properties:
-- compatible: Shall contain "amlogic,meson8b-pwm"
- or "amlogic,meson-gxbb-pwm"
- or "amlogic,meson-gxbb-ao-pwm"
- or "amlogic,meson-axg-ee-pwm"
- or "amlogic,meson-axg-ao-pwm"
- or "amlogic,meson-g12a-ee-pwm"
- or "amlogic,meson-g12a-ao-pwm-ab"
- or "amlogic,meson-g12a-ao-pwm-cd"
-- #pwm-cells: Should be 3. See pwm.yaml in this directory for a description of
- the cells format.
-
-Optional properties:
-- clocks: Could contain one or two parents clocks phandle for each of the two
- PWM channels.
-- clock-names: Could contain at least the "clkin0" and/or "clkin1" names.
-
-Example:
-
- pwm_ab: pwm@8550 {
- compatible = "amlogic,meson-gxbb-pwm";
- reg = <0x0 0x08550 0x0 0x10>;
- #pwm-cells = <3>;
- clocks = <&xtal>, <&xtal>;
- clock-names = "clkin0", "clkin1";
- }
--
2.39.1
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH 7/8] dt-bindings: interrupt-controller: Add Amlogic Meson GPIO interrupt controller binding
2023-01-23 21:22 [PATCH 0/8] soc: amlogic: switch bindings to yaml and adjust some dtbs's Heiner Kallweit
` (5 preceding siblings ...)
2023-01-23 21:29 ` [PATCH 6/8] dt-bindings: pwm: Add Amlogic Meson PWM binding Heiner Kallweit
@ 2023-01-23 21:30 ` Heiner Kallweit
2023-01-24 1:22 ` Rob Herring
2023-01-23 21:30 ` [PATCH 8/8] dt-bindings: pinctrl: Add Amlogic Meson pinctrl binding Heiner Kallweit
` (4 subsequent siblings)
11 siblings, 1 reply; 26+ messages in thread
From: Heiner Kallweit @ 2023-01-23 21:30 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Neil Armstrong, Kevin Hilman,
Jerome Brunet, Martin Blumenstingl, Alessandro Zummo,
Alexandre Belloni, Thierry Reding, Uwe Kleine-König,
Thomas Gleixner, Marc Zyngier, Linus Walleij
Cc: devicetree, linux-arm-kernel, open list:ARM/Amlogic Meson...,
linux-pwm, linux-rtc, linux-gpio
Add Amlogic Meson GPIO interrupt controller binding.
Tested with make targets dt_binding_check and dtbs_check.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
.../amlogic,meson-gpio-intc.txt | 38 ----------
.../amlogic,meson-gpio-intc.yaml | 72 +++++++++++++++++++
2 files changed, 72 insertions(+), 38 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml
diff --git a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
deleted file mode 100644
index bde63f8f0..000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-Amlogic meson GPIO interrupt controller
-
-Meson SoCs contains an interrupt controller which is able to watch the SoC
-pads and generate an interrupt on edge or level. The controller is essentially
-a 256 pads to 8 GIC interrupt multiplexer, with a filter block to select edge
-or level and polarity. It does not expose all 256 mux inputs because the
-documentation shows that the upper part is not mapped to any pad. The actual
-number of interrupt exposed depends on the SoC.
-
-Required properties:
-
-- compatible : must have "amlogic,meson8-gpio-intc" and either
- "amlogic,meson8-gpio-intc" for meson8 SoCs (S802) or
- "amlogic,meson8b-gpio-intc" for meson8b SoCs (S805) or
- "amlogic,meson-gxbb-gpio-intc" for GXBB SoCs (S905) or
- "amlogic,meson-gxl-gpio-intc" for GXL SoCs (S905X, S912)
- "amlogic,meson-axg-gpio-intc" for AXG SoCs (A113D, A113X)
- "amlogic,meson-g12a-gpio-intc" for G12A SoCs (S905D2, S905X2, S905Y2)
- "amlogic,meson-sm1-gpio-intc" for SM1 SoCs (S905D3, S905X3, S905Y3)
- "amlogic,meson-a1-gpio-intc" for A1 SoCs (A113L)
- "amlogic,meson-s4-gpio-intc" for S4 SoCs (S802X2, S905Y4, S805X2G, S905W2)
-- reg : Specifies base physical address and size of the registers.
-- interrupt-controller : Identifies the node as an interrupt controller.
-- #interrupt-cells : Specifies the number of cells needed to encode an
- interrupt source. The value must be 2.
-- meson,channel-interrupts: Array with the 8 upstream hwirq numbers. These
- are the hwirqs used on the parent interrupt controller.
-
-Example:
-
-gpio_interrupt: interrupt-controller@9880 {
- compatible = "amlogic,meson-gxbb-gpio-intc",
- "amlogic,meson-gpio-intc";
- reg = <0x0 0x9880 0x0 0x10>;
- interrupt-controller;
- #interrupt-cells = <2>;
- meson,channel-interrupts = <64 65 66 67 68 69 70 71>;
-};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml
new file mode 100644
index 000000000..2f6261b9e
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/amlogic,meson-gpio-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson GPIO interrupt controller
+
+maintainers:
+ - Heiner Kallweit <hkallweit1@gmail.com>
+
+description: |
+ Meson SoCs contains an interrupt controller which is able to watch the SoC
+ pads and generate an interrupt on edge or level. The controller is essentially
+ a 256 pads to 8 GIC interrupt multiplexer, with a filter block to select edge
+ or level and polarity. It does not expose all 256 mux inputs because the
+ documentation shows that the upper part is not mapped to any pad. The actual
+ number of interrupt exposed depends on the SoC.
+
+allOf:
+ - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+ compatible:
+ enum:
+ - amlogic,meson8-gpio-intc
+ - amlogic,meson8b-gpio-intc
+ - amlogic,meson-gxbb-gpio-intc
+ - amlogic,meson-gxl-gpio-intc
+ - amlogic,meson-axg-gpio-intc
+ - amlogic,meson-g12a-gpio-intc
+ - amlogic,meson-sm1-gpio-intc
+ - amlogic,meson-a1-gpio-intc
+ - amlogic,meson-s4-gpio-intc
+ - amlogic,meson-sc2-gpio-intc
+
+ reg:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 2
+
+ amlogic,channel-interrupts:
+ description: Array with the upstream hwirq numbers
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+
+required:
+ - compatible
+ - reg
+ - interrupt-controller
+ - "#interrupt-cells"
+ - amlogic,channel-interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ bus@c1100000 {
+ reg = <0x0 0xc1100000 0x0 0x100000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ interrupt-controller@9880 {
+ compatible = "amlogic,meson-gxbb-gpio-intc";
+ reg = <0x0 0x9880 0x0 0x10>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
+ };
+ };
--
2.39.1
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH 8/8] dt-bindings: pinctrl: Add Amlogic Meson pinctrl binding
2023-01-23 21:22 [PATCH 0/8] soc: amlogic: switch bindings to yaml and adjust some dtbs's Heiner Kallweit
` (6 preceding siblings ...)
2023-01-23 21:30 ` [PATCH 7/8] dt-bindings: interrupt-controller: Add Amlogic Meson GPIO interrupt controller binding Heiner Kallweit
@ 2023-01-23 21:30 ` Heiner Kallweit
2023-01-24 1:22 ` Rob Herring
2023-01-24 7:16 ` [PATCH 0/8] soc: amlogic: switch bindings to yaml and adjust some dtbs's Neil Armstrong
` (3 subsequent siblings)
11 siblings, 1 reply; 26+ messages in thread
From: Heiner Kallweit @ 2023-01-23 21:30 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Neil Armstrong, Kevin Hilman,
Jerome Brunet, Martin Blumenstingl, Alessandro Zummo,
Alexandre Belloni, Thierry Reding, Uwe Kleine-König,
Thomas Gleixner, Marc Zyngier, Linus Walleij
Cc: devicetree, linux-arm-kernel, open list:ARM/Amlogic Meson...,
linux-pwm, linux-rtc, linux-gpio
Add Amlogic Meson pinctrl binding.
Tested with make targets dt_binding_check and dtbs_check.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
.../pinctrl/amlogic,meson-pinctrl.yaml | 121 ++++++++++++++++++
.../bindings/pinctrl/meson,pinctrl.txt | 94 --------------
2 files changed, 121 insertions(+), 94 deletions(-)
create mode 100644 Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl.yaml
delete mode 100644 Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl.yaml
new file mode 100644
index 000000000..afdf4dade
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/amlogic,meson-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson pinmux controller
+
+maintainers:
+ - Neil Armstrong <neil.armstrong@linaro.org>
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+properties:
+ compatible:
+ enum:
+ - amlogic,meson8-cbus-pinctrl
+ - amlogic,meson8b-cbus-pinctrl
+ - amlogic,meson8m2-cbus-pinctrl
+ - amlogic,meson8-aobus-pinctrl
+ - amlogic,meson8b-aobus-pinctrl
+ - amlogic,meson8m2-aobus-pinctrl
+ - amlogic,meson-gxbb-periphs-pinctrl
+ - amlogic,meson-gxbb-aobus-pinctrl
+ - amlogic,meson-gxl-periphs-pinctrl
+ - amlogic,meson-gxl-aobus-pinctrl
+ - amlogic,meson-axg-periphs-pinctrl
+ - amlogic,meson-axg-aobus-pinctrl
+ - amlogic,meson-g12a-periphs-pinctrl
+ - amlogic,meson-g12a-aobus-pinctrl
+ - amlogic,meson-a1-periphs-pinctrl
+ - amlogic,meson-s4-periphs-pinctrl
+
+ ranges: true
+
+ "#address-cells":
+ const: 2
+
+ "#size-cells":
+ const: 2
+
+required:
+ - compatible
+ - ranges
+ - "#address-cells"
+ - "#size-cells"
+
+additionalProperties:
+ anyOf:
+ - type: object
+ allOf:
+ - $ref: pincfg-node.yaml#
+ - $ref: pinmux-node.yaml#
+
+patternProperties:
+ "^bank@[0-9]$":
+ type: object
+ properties:
+ reg:
+ minItems: 5
+ maxItems: 5
+
+ reg-names:
+ items:
+ - const: gpio
+ - const: pull
+ - const: pull-enable
+ - const: mux
+ - const: ds
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+
+ gpio-ranges:
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ required:
+ - reg
+ - reg-names
+ - gpio-controller
+ - "#gpio-cells"
+ - gpio-ranges
+
+examples:
+ - |
+ bus@34400 {
+ reg = <0x0 0x34400 0x0 0x400>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pinctrl@40 {
+ compatible = "amlogic,meson-g12a-periphs-pinctrl";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ /* avoid "unit has no reg or ranges property" warning */
+ ranges = <0x0 0x0 0x0 0x34400 0x0 0x100>;
+
+ bank@40 {
+ reg = <0x0 0x40 0x0 0x4c>,
+ <0x0 0xe8 0x0 0x18>,
+ <0x0 0x120 0x0 0x18>,
+ <0x0 0x2c0 0x0 0x40>,
+ <0x0 0x340 0x0 0x1c>;
+ reg-names = "gpio", "pull", "pull-enable", "mux", "ds";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&periphs_pinctrl 0 0 86>;
+ };
+
+ cec_ao_a_h_pins: cec_ao_a_h {
+ mux {
+ groups = "cec_ao_a_h";
+ function = "cec_ao_a_h";
+ bias-disable;
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
deleted file mode 100644
index 8146193bd..000000000
--- a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
+++ /dev/null
@@ -1,94 +0,0 @@
-== Amlogic Meson pinmux controller ==
-
-Required properties for the root node:
- - compatible: one of "amlogic,meson8-cbus-pinctrl"
- "amlogic,meson8b-cbus-pinctrl"
- "amlogic,meson8m2-cbus-pinctrl"
- "amlogic,meson8-aobus-pinctrl"
- "amlogic,meson8b-aobus-pinctrl"
- "amlogic,meson8m2-aobus-pinctrl"
- "amlogic,meson-gxbb-periphs-pinctrl"
- "amlogic,meson-gxbb-aobus-pinctrl"
- "amlogic,meson-gxl-periphs-pinctrl"
- "amlogic,meson-gxl-aobus-pinctrl"
- "amlogic,meson-axg-periphs-pinctrl"
- "amlogic,meson-axg-aobus-pinctrl"
- "amlogic,meson-g12a-periphs-pinctrl"
- "amlogic,meson-g12a-aobus-pinctrl"
- "amlogic,meson-a1-periphs-pinctrl"
- "amlogic,meson-s4-periphs-pinctrl"
- - reg: address and size of registers controlling irq functionality
-
-=== GPIO sub-nodes ===
-
-The GPIO bank for the controller is represented as a sub-node and it acts as a
-GPIO controller.
-
-Required properties for sub-nodes are:
- - reg: should contain a list of address and size, one tuple for each entry
- in reg-names.
- - reg-names: an array of strings describing the "reg" entries.
- Must contain "mux" and "gpio".
- May contain "pull", "pull-enable" and "ds" when appropriate.
- - gpio-controller: identifies the node as a gpio controller
- - #gpio-cells: must be 2
-
-=== Other sub-nodes ===
-
-Child nodes without the "gpio-controller" represent some desired
-configuration for a pin or a group. Those nodes can be pinmux nodes or
-configuration nodes.
-
-Required properties for pinmux nodes are:
- - groups: a list of pinmux groups. The list of all available groups
- depends on the SoC and can be found in driver sources.
- - function: the name of a function to activate for the specified set
- of groups. The list of all available functions depends on the SoC
- and can be found in driver sources.
-
-Required properties for configuration nodes:
- - pins: a list of pin names
-
-Configuration nodes support the following generic properties, as
-described in file pinctrl-bindings.txt:
- - "bias-disable"
- - "bias-pull-up"
- - "bias-pull-down"
- - "output-enable"
- - "output-disable"
- - "output-low"
- - "output-high"
-
-Optional properties :
- - drive-strength-microamp: Drive strength for the specified pins in uA.
- This property is only valid for G12A and newer.
-
-=== Example ===
-
- pinctrl: pinctrl@c1109880 {
- compatible = "amlogic,meson8-cbus-pinctrl";
- reg = <0xc1109880 0x10>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- gpio: banks@c11080b0 {
- reg = <0xc11080b0 0x28>,
- <0xc11080e8 0x18>,
- <0xc1108120 0x18>,
- <0xc1108030 0x30>;
- reg-names = "mux", "pull", "pull-enable", "gpio";
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- nand {
- mux {
- groups = "nand_io", "nand_io_ce0", "nand_io_ce1",
- "nand_io_rb0", "nand_ale", "nand_cle",
- "nand_wen_clk", "nand_ren_clk", "nand_dqs",
- "nand_ce2", "nand_ce3";
- function = "nand";
- };
- };
- };
--
2.39.1
^ permalink raw reply related [flat|nested] 26+ messages in thread
* Re: [PATCH 7/8] dt-bindings: interrupt-controller: Add Amlogic Meson GPIO interrupt controller binding
2023-01-23 21:30 ` [PATCH 7/8] dt-bindings: interrupt-controller: Add Amlogic Meson GPIO interrupt controller binding Heiner Kallweit
@ 2023-01-24 1:22 ` Rob Herring
2023-01-24 7:03 ` Heiner Kallweit
0 siblings, 1 reply; 26+ messages in thread
From: Rob Herring @ 2023-01-24 1:22 UTC (permalink / raw)
To: Heiner Kallweit
Cc: Thierry Reding, linux-gpio, linux-pwm, Neil Armstrong,
open list:ARM/Amlogic Meson...,
Krzysztof Kozlowski, Thomas Gleixner, Jerome Brunet,
Linus Walleij, linux-rtc, Alexandre Belloni, Alessandro Zummo,
linux-arm-kernel, ,
devicetree@vger.kernel.org, Rob Herring, Uwe Kleine-König,
Marc Zyngier, Kevin Hilman, Martin Blumenstingl
On Mon, 23 Jan 2023 22:30:08 +0100, Heiner Kallweit wrote:
> Add Amlogic Meson GPIO interrupt controller binding.
> Tested with make targets dt_binding_check and dtbs_check.
>
> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
> ---
> .../amlogic,meson-gpio-intc.txt | 38 ----------
> .../amlogic,meson-gpio-intc.yaml | 72 +++++++++++++++++++
> 2 files changed, 72 insertions(+), 38 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml
>
Running 'make dtbs_check' with the schema in this patch gives the
following warnings. Consider if they are expected or the schema is
incorrect. These may not be new warnings.
Note that it is not yet a requirement to have 0 warnings for dtbs_check.
This will change in the future.
Full log is available here: https://patchwork.ozlabs.org/project/devicetree-bindings/patch/06289641-18b1-320d-6162-7ae176452f31@gmail.com
interrupt-controller@4080: compatible: ['amlogic,meson-s4-gpio-intc', 'amlogic,meson-gpio-intc'] is too long
arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dtb
interrupt-controller@9880: compatible:0: 'amlogic,meson-gpio-intc' is not one of ['amlogic,meson8-gpio-intc', 'amlogic,meson8b-gpio-intc', 'amlogic,meson-gxbb-gpio-intc', 'amlogic,meson-gxl-gpio-intc', 'amlogic,meson-axg-gpio-intc', 'amlogic,meson-g12a-gpio-intc', 'amlogic,meson-sm1-gpio-intc', 'amlogic,meson-a1-gpio-intc', 'amlogic,meson-s4-gpio-intc', 'amlogic,meson-sc2-gpio-intc']
arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-meta.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-pro.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-telos.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-libretech-pc.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-vero4k-plus.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905w-p281.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-gt1-ultimate.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-q200.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-q201.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dtb
arch/arm/boot/dts/meson8b-ec100.dtb
arch/arm/boot/dts/meson8b-mxq.dtb
arch/arm/boot/dts/meson8b-odroidc1.dtb
interrupt-controller@9880: compatible: ['amlogic,meson8-gpio-intc', 'amlogic,meson-gpio-intc'] is too long
arch/arm/boot/dts/meson8m2-mxiii-plus.dtb
arch/arm/boot/dts/meson8-minix-neo-x8.dtb
interrupt-controller@9880: compatible: ['amlogic,meson-gpio-intc', 'amlogic,meson8b-gpio-intc'] is too long
arch/arm/boot/dts/meson8b-ec100.dtb
arch/arm/boot/dts/meson8b-mxq.dtb
arch/arm/boot/dts/meson8b-odroidc1.dtb
interrupt-controller@9880: compatible: ['amlogic,meson-gpio-intc', 'amlogic,meson-gxbb-gpio-intc'] is too long
arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-meta.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-pro.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-telos.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dtb
interrupt-controller@9880: compatible: ['amlogic,meson-gpio-intc', 'amlogic,meson-gxl-gpio-intc'] is too long
arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-libretech-pc.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-vero4k-plus.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905w-p281.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-gt1-ultimate.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-q200.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-q201.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dtb
interrupt-controller@f080: compatible: ['amlogic,meson-axg-gpio-intc', 'amlogic,meson-gpio-intc'] is too long
arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dtb
arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dtb
arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dtb
arch/arm64/boot/dts/amlogic/meson-axg-s400.dtb
interrupt-controller@f080: compatible: ['amlogic,meson-g12a-gpio-intc', 'amlogic,meson-gpio-intc'] is too long
arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dtb
arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dtb
arch/arm64/boot/dts/amlogic/meson-g12a-u200.dtb
arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dtb
arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dtb
arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dtb
arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dtb
arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dtb
arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dtb
arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtb
arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2-plus.dtb
arch/arm64/boot/dts/amlogic/meson-g12b-s922x-khadas-vim3.dtb
arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dtb
interrupt-controller@f080: compatible: ['amlogic,meson-sm1-gpio-intc', 'amlogic,meson-gpio-intc'] is too long
arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dtb
arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dtb
arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dtb
arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dtb
arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dtb
arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dtb
arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dtb
arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dtb
arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dtb
arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dtb
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 8/8] dt-bindings: pinctrl: Add Amlogic Meson pinctrl binding
2023-01-23 21:30 ` [PATCH 8/8] dt-bindings: pinctrl: Add Amlogic Meson pinctrl binding Heiner Kallweit
@ 2023-01-24 1:22 ` Rob Herring
2023-01-24 7:14 ` Heiner Kallweit
0 siblings, 1 reply; 26+ messages in thread
From: Rob Herring @ 2023-01-24 1:22 UTC (permalink / raw)
To: Heiner Kallweit
Cc: Alessandro Zummo, Thierry Reding, Neil Armstrong, devicetree,
Thomas Gleixner, linux-arm-kernel, Krzysztof Kozlowski,
Kevin Hilman, Rob Herring, Jerome Brunet, Marc Zyngier,
Uwe Kleine-König, Linus Walleij, Alexandre Belloni,
Martin Blumenstingl, linux-pwm, linux-rtc,
open list:ARM/Amlogic Meson...,
linux-gpio
On Mon, 23 Jan 2023 22:30:44 +0100, Heiner Kallweit wrote:
> Add Amlogic Meson pinctrl binding.
> Tested with make targets dt_binding_check and dtbs_check.
>
> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
> ---
> .../pinctrl/amlogic,meson-pinctrl.yaml | 121 ++++++++++++++++++
> .../bindings/pinctrl/meson,pinctrl.txt | 94 --------------
> 2 files changed, 121 insertions(+), 94 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl.yaml
> delete mode 100644 Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
>
Running 'make dtbs_check' with the schema in this patch gives the
following warnings. Consider if they are expected or the schema is
incorrect. These may not be new warnings.
Note that it is not yet a requirement to have 0 warnings for dtbs_check.
This will change in the future.
Full log is available here: https://patchwork.ozlabs.org/project/devicetree-bindings/patch/69188960-9d88-4163-8a87-1820fb673eb9@gmail.com
pinctrl@84: #address-cells:0:0: 2 was expected
arch/arm/boot/dts/meson8b-ec100.dtb
arch/arm/boot/dts/meson8b-mxq.dtb
arch/arm/boot/dts/meson8b-odroidc1.dtb
arch/arm/boot/dts/meson8m2-mxiii-plus.dtb
arch/arm/boot/dts/meson8-minix-neo-x8.dtb
pinctrl@84: compatible: ['amlogic,meson8m2-aobus-pinctrl', 'amlogic,meson8-aobus-pinctrl'] is too long
arch/arm/boot/dts/meson8m2-mxiii-plus.dtb
pinctrl@84: reg: 'anyOf' conditional failed, one must be fixed:
arch/arm/boot/dts/meson8b-ec100.dtb
arch/arm/boot/dts/meson8b-mxq.dtb
arch/arm/boot/dts/meson8b-odroidc1.dtb
arch/arm/boot/dts/meson8m2-mxiii-plus.dtb
arch/arm/boot/dts/meson8-minix-neo-x8.dtb
pinctrl@84: #size-cells:0:0: 2 was expected
arch/arm/boot/dts/meson8b-ec100.dtb
arch/arm/boot/dts/meson8b-mxq.dtb
arch/arm/boot/dts/meson8b-odroidc1.dtb
arch/arm/boot/dts/meson8m2-mxiii-plus.dtb
arch/arm/boot/dts/meson8-minix-neo-x8.dtb
pinctrl@9880: #address-cells:0:0: 2 was expected
arch/arm/boot/dts/meson8b-ec100.dtb
arch/arm/boot/dts/meson8b-mxq.dtb
arch/arm/boot/dts/meson8b-odroidc1.dtb
arch/arm/boot/dts/meson8m2-mxiii-plus.dtb
arch/arm/boot/dts/meson8-minix-neo-x8.dtb
pinctrl@9880: compatible: ['amlogic,meson8m2-cbus-pinctrl', 'amlogic,meson8-cbus-pinctrl'] is too long
arch/arm/boot/dts/meson8m2-mxiii-plus.dtb
pinctrl@9880: reg: 'anyOf' conditional failed, one must be fixed:
arch/arm/boot/dts/meson8b-ec100.dtb
arch/arm/boot/dts/meson8b-mxq.dtb
arch/arm/boot/dts/meson8b-odroidc1.dtb
arch/arm/boot/dts/meson8m2-mxiii-plus.dtb
arch/arm/boot/dts/meson8-minix-neo-x8.dtb
pinctrl@9880: #size-cells:0:0: 2 was expected
arch/arm/boot/dts/meson8b-ec100.dtb
arch/arm/boot/dts/meson8b-mxq.dtb
arch/arm/boot/dts/meson8b-odroidc1.dtb
arch/arm/boot/dts/meson8m2-mxiii-plus.dtb
arch/arm/boot/dts/meson8-minix-neo-x8.dtb
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 6/8] dt-bindings: pwm: Add Amlogic Meson PWM binding
2023-01-23 21:29 ` [PATCH 6/8] dt-bindings: pwm: Add Amlogic Meson PWM binding Heiner Kallweit
@ 2023-01-24 1:22 ` Rob Herring
2023-01-25 19:22 ` Rob Herring
1 sibling, 0 replies; 26+ messages in thread
From: Rob Herring @ 2023-01-24 1:22 UTC (permalink / raw)
To: Heiner Kallweit
Cc: linux-gpio, Neil Armstrong, Martin Blumenstingl, linux-rtc,
Alexandre Belloni, Krzysztof Kozlowski, devicetree,
open list:ARM/Amlogic Meson...,
Marc Zyngier, Uwe Kleine-König, Rob Herring,
linux-arm-kernel, linux-pwm, Alessandro Zummo, Jerome Brunet, ,
Thierry Reding, Thomas Gleixner, Linus Walleij, Kevin Hilman
On Mon, 23 Jan 2023 22:29:27 +0100, Heiner Kallweit wrote:
> Add Amlogic Meson PWM binding.
> Tested with make targets dt_binding_check and dtbs_check.
>
> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
> ---
> .../devicetree/bindings/pwm/pwm-amlogic.yaml | 61 +++++++++++++++++++
> .../devicetree/bindings/pwm/pwm-meson.txt | 29 ---------
> 2 files changed, 61 insertions(+), 29 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/pwm/pwm-amlogic.yaml
> delete mode 100644 Documentation/devicetree/bindings/pwm/pwm-meson.txt
>
Running 'make dtbs_check' with the schema in this patch gives the
following warnings. Consider if they are expected or the schema is
incorrect. These may not be new warnings.
Note that it is not yet a requirement to have 0 warnings for dtbs_check.
This will change in the future.
Full log is available here: https://patchwork.ozlabs.org/project/devicetree-bindings/patch/0d492f0e-abb3-33f6-3ee9-09e1440a9015@gmail.com
pwm@550: compatible:0: 'amlogic,meson-gx-ao-pwm' is not one of ['amlogic,meson8b-pwm', 'amlogic,meson-gxbb-pwm', 'amlogic,meson-gxbb-ao-pwm', 'amlogic,meson-axg-ee-pwm', 'amlogic,meson-axg-ao-pwm', 'amlogic,meson-g12a-ee-pwm', 'amlogic,meson-g12a-ao-pwm-ab', 'amlogic,meson-g12a-ao-pwm-cd', 'amlogic,meson-s4-pwm']
arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-meta.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-pro.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-telos.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-libretech-pc.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-vero4k-plus.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905w-p281.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-gt1-ultimate.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-q200.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-q201.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dtb
pwm@550: compatible: ['amlogic,meson-gx-ao-pwm', 'amlogic,meson-gxbb-ao-pwm'] is too long
arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-meta.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-pro.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-telos.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-libretech-pc.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-vero4k-plus.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905w-p281.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-gt1-ultimate.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-q200.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-q201.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dtb
pwm@8550: compatible:0: 'amlogic,meson8-pwm' is not one of ['amlogic,meson8b-pwm', 'amlogic,meson-gxbb-pwm', 'amlogic,meson-gxbb-ao-pwm', 'amlogic,meson-axg-ee-pwm', 'amlogic,meson-axg-ao-pwm', 'amlogic,meson-g12a-ee-pwm', 'amlogic,meson-g12a-ao-pwm-ab', 'amlogic,meson-g12a-ao-pwm-cd', 'amlogic,meson-s4-pwm']
arch/arm/boot/dts/meson8m2-mxiii-plus.dtb
arch/arm/boot/dts/meson8-minix-neo-x8.dtb
pwm@8550: compatible:0: 'amlogic,meson-gx-pwm' is not one of ['amlogic,meson8b-pwm', 'amlogic,meson-gxbb-pwm', 'amlogic,meson-gxbb-ao-pwm', 'amlogic,meson-axg-ee-pwm', 'amlogic,meson-axg-ao-pwm', 'amlogic,meson-g12a-ee-pwm', 'amlogic,meson-g12a-ao-pwm-ab', 'amlogic,meson-g12a-ao-pwm-cd', 'amlogic,meson-s4-pwm']
arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-meta.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-pro.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-telos.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-libretech-pc.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-vero4k-plus.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905w-p281.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-gt1-ultimate.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-q200.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-q201.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dtb
pwm@8550: compatible: ['amlogic,meson8-pwm', 'amlogic,meson8b-pwm'] is too long
arch/arm/boot/dts/meson8m2-mxiii-plus.dtb
arch/arm/boot/dts/meson8-minix-neo-x8.dtb
pwm@8550: compatible: ['amlogic,meson-gx-pwm', 'amlogic,meson-gxbb-pwm'] is too long
arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-meta.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-pro.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-telos.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-libretech-pc.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-vero4k-plus.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905w-p281.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-gt1-ultimate.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-q200.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-q201.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dtb
pwm@8650: compatible:0: 'amlogic,meson8-pwm' is not one of ['amlogic,meson8b-pwm', 'amlogic,meson-gxbb-pwm', 'amlogic,meson-gxbb-ao-pwm', 'amlogic,meson-axg-ee-pwm', 'amlogic,meson-axg-ao-pwm', 'amlogic,meson-g12a-ee-pwm', 'amlogic,meson-g12a-ao-pwm-ab', 'amlogic,meson-g12a-ao-pwm-cd', 'amlogic,meson-s4-pwm']
arch/arm/boot/dts/meson8m2-mxiii-plus.dtb
arch/arm/boot/dts/meson8-minix-neo-x8.dtb
pwm@8650: compatible:0: 'amlogic,meson-gx-pwm' is not one of ['amlogic,meson8b-pwm', 'amlogic,meson-gxbb-pwm', 'amlogic,meson-gxbb-ao-pwm', 'amlogic,meson-axg-ee-pwm', 'amlogic,meson-axg-ao-pwm', 'amlogic,meson-g12a-ee-pwm', 'amlogic,meson-g12a-ao-pwm-ab', 'amlogic,meson-g12a-ao-pwm-cd', 'amlogic,meson-s4-pwm']
arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-meta.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-pro.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-telos.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-libretech-pc.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-vero4k-plus.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905w-p281.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-gt1-ultimate.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-q200.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-q201.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dtb
pwm@8650: compatible: ['amlogic,meson8-pwm', 'amlogic,meson8b-pwm'] is too long
arch/arm/boot/dts/meson8m2-mxiii-plus.dtb
arch/arm/boot/dts/meson8-minix-neo-x8.dtb
pwm@8650: compatible: ['amlogic,meson-gx-pwm', 'amlogic,meson-gxbb-pwm'] is too long
arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-meta.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-pro.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-telos.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-libretech-pc.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-vero4k-plus.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905w-p281.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-gt1-ultimate.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-q200.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-q201.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dtb
pwm@86c0: compatible:0: 'amlogic,meson8-pwm' is not one of ['amlogic,meson8b-pwm', 'amlogic,meson-gxbb-pwm', 'amlogic,meson-gxbb-ao-pwm', 'amlogic,meson-axg-ee-pwm', 'amlogic,meson-axg-ao-pwm', 'amlogic,meson-g12a-ee-pwm', 'amlogic,meson-g12a-ao-pwm-ab', 'amlogic,meson-g12a-ao-pwm-cd', 'amlogic,meson-s4-pwm']
arch/arm/boot/dts/meson8m2-mxiii-plus.dtb
arch/arm/boot/dts/meson8-minix-neo-x8.dtb
pwm@86c0: compatible:0: 'amlogic,meson-gx-pwm' is not one of ['amlogic,meson8b-pwm', 'amlogic,meson-gxbb-pwm', 'amlogic,meson-gxbb-ao-pwm', 'amlogic,meson-axg-ee-pwm', 'amlogic,meson-axg-ao-pwm', 'amlogic,meson-g12a-ee-pwm', 'amlogic,meson-g12a-ao-pwm-ab', 'amlogic,meson-g12a-ao-pwm-cd', 'amlogic,meson-s4-pwm']
arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-meta.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-pro.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-telos.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-libretech-pc.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-vero4k-plus.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905w-p281.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-gt1-ultimate.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-q200.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-q201.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dtb
pwm@86c0: compatible: ['amlogic,meson8-pwm', 'amlogic,meson8b-pwm'] is too long
arch/arm/boot/dts/meson8m2-mxiii-plus.dtb
arch/arm/boot/dts/meson8-minix-neo-x8.dtb
pwm@86c0: compatible: ['amlogic,meson-gx-pwm', 'amlogic,meson-gxbb-pwm'] is too long
arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-meta.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-pro.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-telos.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dtb
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-libretech-pc.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-vero4k-plus.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905w-p281.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dtb
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-gt1-ultimate.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-q200.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-q201.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dtb
arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dtb
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 7/8] dt-bindings: interrupt-controller: Add Amlogic Meson GPIO interrupt controller binding
2023-01-24 1:22 ` Rob Herring
@ 2023-01-24 7:03 ` Heiner Kallweit
2023-01-25 16:46 ` Rob Herring
0 siblings, 1 reply; 26+ messages in thread
From: Heiner Kallweit @ 2023-01-24 7:03 UTC (permalink / raw)
To: Rob Herring
Cc: Thierry Reding, linux-gpio, linux-pwm, Neil Armstrong,
open list:ARM/Amlogic Meson...,
Krzysztof Kozlowski, Thomas Gleixner, Jerome Brunet,
Linus Walleij, linux-rtc, Alexandre Belloni, Alessandro Zummo,
linux-arm-kernel, devicetree, Rob Herring, Uwe Kleine-König,
Marc Zyngier, Kevin Hilman, Martin Blumenstingl
On 24.01.2023 02:22, Rob Herring wrote:
>
> On Mon, 23 Jan 2023 22:30:08 +0100, Heiner Kallweit wrote:
>> Add Amlogic Meson GPIO interrupt controller binding.
>> Tested with make targets dt_binding_check and dtbs_check.
>>
>> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
>> ---
>> .../amlogic,meson-gpio-intc.txt | 38 ----------
>> .../amlogic,meson-gpio-intc.yaml | 72 +++++++++++++++++++
>> 2 files changed, 72 insertions(+), 38 deletions(-)
>> delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
>> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml
>>
>
> Running 'make dtbs_check' with the schema in this patch gives the
> following warnings. Consider if they are expected or the schema is
> incorrect. These may not be new warnings.
>
Patch 4 of the series fixes these warnings.
Did you apply the full series?
> Note that it is not yet a requirement to have 0 warnings for dtbs_check.
> This will change in the future.
>
> Full log is available here: https://patchwork.ozlabs.org/project/devicetree-bindings/patch/06289641-18b1-320d-6162-7ae176452f31@gmail.com
>
>
> interrupt-controller@4080: compatible: ['amlogic,meson-s4-gpio-intc', 'amlogic,meson-gpio-intc'] is too long
> arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dtb
>
> interrupt-controller@9880: compatible:0: 'amlogic,meson-gpio-intc' is not one of ['amlogic,meson8-gpio-intc', 'amlogic,meson8b-gpio-intc', 'amlogic,meson-gxbb-gpio-intc', 'amlogic,meson-gxl-gpio-intc', 'amlogic,meson-axg-gpio-intc', 'amlogic,meson-g12a-gpio-intc', 'amlogic,meson-sm1-gpio-intc', 'amlogic,meson-a1-gpio-intc', 'amlogic,meson-s4-gpio-intc', 'amlogic,meson-sc2-gpio-intc']
> arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-meta.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-pro.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-telos.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905d-libretech-pc.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905d-vero4k-plus.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905w-p281.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-gt1-ultimate.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-q200.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-q201.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dtb
> arch/arm/boot/dts/meson8b-ec100.dtb
> arch/arm/boot/dts/meson8b-mxq.dtb
> arch/arm/boot/dts/meson8b-odroidc1.dtb
>
> interrupt-controller@9880: compatible: ['amlogic,meson8-gpio-intc', 'amlogic,meson-gpio-intc'] is too long
> arch/arm/boot/dts/meson8m2-mxiii-plus.dtb
> arch/arm/boot/dts/meson8-minix-neo-x8.dtb
>
> interrupt-controller@9880: compatible: ['amlogic,meson-gpio-intc', 'amlogic,meson8b-gpio-intc'] is too long
> arch/arm/boot/dts/meson8b-ec100.dtb
> arch/arm/boot/dts/meson8b-mxq.dtb
> arch/arm/boot/dts/meson8b-odroidc1.dtb
>
> interrupt-controller@9880: compatible: ['amlogic,meson-gpio-intc', 'amlogic,meson-gxbb-gpio-intc'] is too long
> arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-meta.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-pro.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-telos.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dtb
>
> interrupt-controller@9880: compatible: ['amlogic,meson-gpio-intc', 'amlogic,meson-gxl-gpio-intc'] is too long
> arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905d-libretech-pc.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905d-vero4k-plus.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905w-p281.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-gt1-ultimate.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-q200.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-q201.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dtb
>
> interrupt-controller@f080: compatible: ['amlogic,meson-axg-gpio-intc', 'amlogic,meson-gpio-intc'] is too long
> arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dtb
> arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dtb
> arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dtb
> arch/arm64/boot/dts/amlogic/meson-axg-s400.dtb
>
> interrupt-controller@f080: compatible: ['amlogic,meson-g12a-gpio-intc', 'amlogic,meson-gpio-intc'] is too long
> arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dtb
> arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dtb
> arch/arm64/boot/dts/amlogic/meson-g12a-u200.dtb
> arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dtb
> arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dtb
> arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dtb
> arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dtb
> arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dtb
> arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dtb
> arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtb
> arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2-plus.dtb
> arch/arm64/boot/dts/amlogic/meson-g12b-s922x-khadas-vim3.dtb
> arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dtb
>
> interrupt-controller@f080: compatible: ['amlogic,meson-sm1-gpio-intc', 'amlogic,meson-gpio-intc'] is too long
> arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dtb
> arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dtb
> arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dtb
> arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dtb
> arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dtb
> arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dtb
> arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dtb
> arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dtb
> arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dtb
> arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dtb
>
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 8/8] dt-bindings: pinctrl: Add Amlogic Meson pinctrl binding
2023-01-24 1:22 ` Rob Herring
@ 2023-01-24 7:14 ` Heiner Kallweit
0 siblings, 0 replies; 26+ messages in thread
From: Heiner Kallweit @ 2023-01-24 7:14 UTC (permalink / raw)
To: Rob Herring
Cc: Alessandro Zummo, Thierry Reding, Neil Armstrong, devicetree,
Thomas Gleixner, linux-arm-kernel, Krzysztof Kozlowski,
Kevin Hilman, Rob Herring, Jerome Brunet, Marc Zyngier,
Uwe Kleine-König, Linus Walleij, Alexandre Belloni,
Martin Blumenstingl, linux-pwm, linux-rtc,
open list:ARM/Amlogic Meson...,
linux-gpio
On 24.01.2023 02:22, Rob Herring wrote:
>
> On Mon, 23 Jan 2023 22:30:44 +0100, Heiner Kallweit wrote:
>> Add Amlogic Meson pinctrl binding.
>> Tested with make targets dt_binding_check and dtbs_check.
>>
>> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
>> ---
>> .../pinctrl/amlogic,meson-pinctrl.yaml | 121 ++++++++++++++++++
>> .../bindings/pinctrl/meson,pinctrl.txt | 94 --------------
>> 2 files changed, 121 insertions(+), 94 deletions(-)
>> create mode 100644 Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl.yaml
>> delete mode 100644 Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
>>
>
Thanks, I didn't catch these warnings because Meson8 support isn't
enabled on my system. Will look into it.
> Running 'make dtbs_check' with the schema in this patch gives the
> following warnings. Consider if they are expected or the schema is
> incorrect. These may not be new warnings.
>
> Note that it is not yet a requirement to have 0 warnings for dtbs_check.
> This will change in the future.
>
> Full log is available here: https://patchwork.ozlabs.org/project/devicetree-bindings/patch/69188960-9d88-4163-8a87-1820fb673eb9@gmail.com
>
>
> pinctrl@84: #address-cells:0:0: 2 was expected
> arch/arm/boot/dts/meson8b-ec100.dtb
> arch/arm/boot/dts/meson8b-mxq.dtb
> arch/arm/boot/dts/meson8b-odroidc1.dtb
> arch/arm/boot/dts/meson8m2-mxiii-plus.dtb
> arch/arm/boot/dts/meson8-minix-neo-x8.dtb
>
> pinctrl@84: compatible: ['amlogic,meson8m2-aobus-pinctrl', 'amlogic,meson8-aobus-pinctrl'] is too long
> arch/arm/boot/dts/meson8m2-mxiii-plus.dtb
>
> pinctrl@84: reg: 'anyOf' conditional failed, one must be fixed:
> arch/arm/boot/dts/meson8b-ec100.dtb
> arch/arm/boot/dts/meson8b-mxq.dtb
> arch/arm/boot/dts/meson8b-odroidc1.dtb
> arch/arm/boot/dts/meson8m2-mxiii-plus.dtb
> arch/arm/boot/dts/meson8-minix-neo-x8.dtb
>
> pinctrl@84: #size-cells:0:0: 2 was expected
> arch/arm/boot/dts/meson8b-ec100.dtb
> arch/arm/boot/dts/meson8b-mxq.dtb
> arch/arm/boot/dts/meson8b-odroidc1.dtb
> arch/arm/boot/dts/meson8m2-mxiii-plus.dtb
> arch/arm/boot/dts/meson8-minix-neo-x8.dtb
>
> pinctrl@9880: #address-cells:0:0: 2 was expected
> arch/arm/boot/dts/meson8b-ec100.dtb
> arch/arm/boot/dts/meson8b-mxq.dtb
> arch/arm/boot/dts/meson8b-odroidc1.dtb
> arch/arm/boot/dts/meson8m2-mxiii-plus.dtb
> arch/arm/boot/dts/meson8-minix-neo-x8.dtb
>
> pinctrl@9880: compatible: ['amlogic,meson8m2-cbus-pinctrl', 'amlogic,meson8-cbus-pinctrl'] is too long
> arch/arm/boot/dts/meson8m2-mxiii-plus.dtb
>
> pinctrl@9880: reg: 'anyOf' conditional failed, one must be fixed:
> arch/arm/boot/dts/meson8b-ec100.dtb
> arch/arm/boot/dts/meson8b-mxq.dtb
> arch/arm/boot/dts/meson8b-odroidc1.dtb
> arch/arm/boot/dts/meson8m2-mxiii-plus.dtb
> arch/arm/boot/dts/meson8-minix-neo-x8.dtb
>
> pinctrl@9880: #size-cells:0:0: 2 was expected
> arch/arm/boot/dts/meson8b-ec100.dtb
> arch/arm/boot/dts/meson8b-mxq.dtb
> arch/arm/boot/dts/meson8b-odroidc1.dtb
> arch/arm/boot/dts/meson8m2-mxiii-plus.dtb
> arch/arm/boot/dts/meson8-minix-neo-x8.dtb
>
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 0/8] soc: amlogic: switch bindings to yaml and adjust some dtbs's
2023-01-23 21:22 [PATCH 0/8] soc: amlogic: switch bindings to yaml and adjust some dtbs's Heiner Kallweit
` (7 preceding siblings ...)
2023-01-23 21:30 ` [PATCH 8/8] dt-bindings: pinctrl: Add Amlogic Meson pinctrl binding Heiner Kallweit
@ 2023-01-24 7:16 ` Neil Armstrong
2023-01-24 9:20 ` Heiner Kallweit
2023-01-26 7:40 ` Uwe Kleine-König
2023-01-24 8:22 ` (subset) " Neil Armstrong
` (2 subsequent siblings)
11 siblings, 2 replies; 26+ messages in thread
From: Neil Armstrong @ 2023-01-24 7:16 UTC (permalink / raw)
To: Heiner Kallweit, Rob Herring, Krzysztof Kozlowski, Kevin Hilman,
Jerome Brunet, Martin Blumenstingl, Alessandro Zummo,
Alexandre Belloni, Thierry Reding, Uwe Kleine-König,
Thomas Gleixner, Marc Zyngier, Linus Walleij
Cc: devicetree, linux-arm-kernel, open list:ARM/Amlogic Meson...,
linux-pwm, linux-rtc, linux-gpio
Hi Heiner,
Le 23/01/2023 à 22:22, Heiner Kallweit a écrit :
> At first adjust some existing dtbs's so that they pass dtbs_check
> after switching bindings to yaml.
Thanks for this patchset, but please drop patches 1, 3 & 4, and take
in account the existing compatible usage in your new bindings like
I did in my conversion patchset.
While we did remove some bad compatibles we introduced a few years ago,
now the GXBB, GXL & GXM are now stable a aew LTS releases now and
a few other projects uses them as-is (U-Boot, BSDs, ...) so changing
the compatibles isn't an option anymore... and we can't know which
one they use and how the implementation behaves we must document
the existing usage without breaking any potential users (including linux).
Thanks,
Neil
>
> Then switch further Amlogic Meson bindings to yaml.
> Tested with make targets dt_binding_check and dtbs_check.
>
> Heiner Kallweit (8):
> arm64: dts: meson-gx: Remove invalid pwm compatible
> arm64: dts: amlogic: Fix non-compliant SD/SDIO node names
> arm64: dts: meson-gx: Set only one compatible string for mmc
> arm64: dts: amlogic: Remove invalid compatible string
> amlogic,meson-gpio-intc
> dt-bindings: rtc: Add Amlogic Meson vrtc controller binding
> dt-bindings: pwm: Add Amlogic Meson PWM binding
> dt-bindings: interrupt-controller: Add Amlogic Meson GPIO interrupt
> controller binding
> dt-bindings: pinctrl: Add Amlogic Meson pinctrl binding
>
> .../amlogic,meson-gpio-intc.txt | 38 ------
> .../amlogic,meson-gpio-intc.yaml | 72 +++++++++++
> .../pinctrl/amlogic,meson-pinctrl.yaml | 121 ++++++++++++++++++
> .../bindings/pinctrl/meson,pinctrl.txt | 94 --------------
> .../devicetree/bindings/pwm/pwm-amlogic.yaml | 61 +++++++++
> .../devicetree/bindings/pwm/pwm-meson.txt | 29 -----
> .../bindings/rtc/amlogic,meson-vrtc.yaml | 50 ++++++++
> .../bindings/rtc/rtc-meson-vrtc.txt | 22 ----
> arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 5 +-
> .../boot/dts/amlogic/meson-g12-common.dtsi | 7 +-
> arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 15 +--
> arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 3 +-
> arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 3 +-
> arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 3 +-
> arch/arm64/boot/dts/amlogic/meson-sm1.dtsi | 3 +-
> 15 files changed, 320 insertions(+), 206 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml
> create mode 100644 Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl.yaml
> delete mode 100644 Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
> create mode 100644 Documentation/devicetree/bindings/pwm/pwm-amlogic.yaml
> delete mode 100644 Documentation/devicetree/bindings/pwm/pwm-meson.txt
> create mode 100644 Documentation/devicetree/bindings/rtc/amlogic,meson-vrtc.yaml
> delete mode 100644 Documentation/devicetree/bindings/rtc/rtc-meson-vrtc.txt
>
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 2/8] arm64: dts: amlogic: Fix non-compliant SD/SDIO node names
2023-01-23 21:24 ` [PATCH 2/8] arm64: dts: amlogic: Fix non-compliant SD/SDIO node names Heiner Kallweit
@ 2023-01-24 7:17 ` Neil Armstrong
0 siblings, 0 replies; 26+ messages in thread
From: Neil Armstrong @ 2023-01-24 7:17 UTC (permalink / raw)
To: Heiner Kallweit, Rob Herring, Krzysztof Kozlowski, Kevin Hilman,
Jerome Brunet, Martin Blumenstingl, Alessandro Zummo,
Alexandre Belloni, Thierry Reding, Uwe Kleine-König,
Thomas Gleixner, Marc Zyngier, Linus Walleij
Cc: devicetree, linux-arm-kernel, open list:ARM/Amlogic Meson...,
linux-pwm, linux-rtc, linux-gpio
Le 23/01/2023 à 22:24, Heiner Kallweit a écrit :
> mmc-controller.yaml defines "^mmc(@.*)?$" as node name pattern.
> In preparation of adding schema-based validation fix the node name
> in two affected files.
>
> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
> ---
> arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 2 +-
> arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 4 ++--
> 2 files changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> index 1648e67af..ed895fb32 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> @@ -1883,7 +1883,7 @@ apb: bus@ffe00000 {
> #size-cells = <2>;
> ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x200000>;
>
> - sd_emmc_b: sd@5000 {
> + sd_emmc_b: mmc@5000 {
> compatible = "amlogic,meson-axg-mmc";
> reg = <0x0 0x5000 0x0 0x800>;
> interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
> index 1a931d5c2..80d82f739 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
> @@ -2321,7 +2321,7 @@ uart_A: serial@24000 {
> };
> };
>
> - sd_emmc_a: sd@ffe03000 {
> + sd_emmc_a: mmc@ffe03000 {
> compatible = "amlogic,meson-axg-mmc";
> reg = <0x0 0xffe03000 0x0 0x800>;
> interrupts = <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>;
> @@ -2333,7 +2333,7 @@ sd_emmc_a: sd@ffe03000 {
> resets = <&reset RESET_SD_EMMC_A>;
> };
>
> - sd_emmc_b: sd@ffe05000 {
> + sd_emmc_b: mmc@ffe05000 {
> compatible = "amlogic,meson-axg-mmc";
> reg = <0x0 0xffe05000 0x0 0x800>;
> interrupts = <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>;
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: (subset) [PATCH 0/8] soc: amlogic: switch bindings to yaml and adjust some dtbs's
2023-01-23 21:22 [PATCH 0/8] soc: amlogic: switch bindings to yaml and adjust some dtbs's Heiner Kallweit
` (8 preceding siblings ...)
2023-01-24 7:16 ` [PATCH 0/8] soc: amlogic: switch bindings to yaml and adjust some dtbs's Neil Armstrong
@ 2023-01-24 8:22 ` Neil Armstrong
2023-01-25 22:24 ` [PATCH v2] dt-bindings: rtc: Convert Amlogic Meson vrtc controller binding Heiner Kallweit
2023-06-22 7:57 ` [PATCH 0/8] soc: amlogic: switch bindings to yaml and adjust some dtbs's Neil Armstrong
11 siblings, 0 replies; 26+ messages in thread
From: Neil Armstrong @ 2023-01-24 8:22 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Kevin Hilman, Jerome Brunet,
Martin Blumenstingl, Alessandro Zummo, Alexandre Belloni,
Thierry Reding, Uwe Kleine-König, Thomas Gleixner,
Marc Zyngier, Linus Walleij, Heiner Kallweit
Cc: devicetree, linux-arm-kernel, open list:ARM/Amlogic Meson...,
linux-pwm, linux-rtc, linux-gpio
Hi,
On Mon, 23 Jan 2023 22:22:15 +0100, Heiner Kallweit wrote:
> At first adjust some existing dtbs's so that they pass dtbs_check
> after switching bindings to yaml.
>
> Then switch further Amlogic Meson bindings to yaml.
> Tested with make targets dt_binding_check and dtbs_check.
>
> Heiner Kallweit (8):
> arm64: dts: meson-gx: Remove invalid pwm compatible
> arm64: dts: amlogic: Fix non-compliant SD/SDIO node names
> arm64: dts: meson-gx: Set only one compatible string for mmc
> arm64: dts: amlogic: Remove invalid compatible string
> amlogic,meson-gpio-intc
> dt-bindings: rtc: Add Amlogic Meson vrtc controller binding
> dt-bindings: pwm: Add Amlogic Meson PWM binding
> dt-bindings: interrupt-controller: Add Amlogic Meson GPIO interrupt
> controller binding
> dt-bindings: pinctrl: Add Amlogic Meson pinctrl binding
>
> [...]
Thanks, Applied to https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git (v6.3/arm64-dt)
[2/8] arm64: dts: amlogic: Fix non-compliant SD/SDIO node names
https://git.kernel.org/amlogic/c/1be13a5091bf71627aa1a3d35360b039510f42f3
These changes has been applied on the intermediate git tree [1].
The v6.3/arm64-dt branch will then be sent via a formal Pull Request to the Linux SoC maintainers
for inclusion in their intermediate git branches in order to be sent to Linus during
the next merge window, or sooner if it's a set of fixes.
In the cases of fixes, those will be merged in the current release candidate
kernel and as soon they appear on the Linux master branch they will be
backported to the previous Stable and Long-Stable kernels [2].
The intermediate git branches are merged daily in the linux-next tree [3],
people are encouraged testing these pre-release kernels and report issues on the
relevant mailing-lists.
If problems are discovered on those changes, please submit a signed-off-by revert
patch followed by a corrective changeset.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git
[2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
[3] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
--
Neil
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 0/8] soc: amlogic: switch bindings to yaml and adjust some dtbs's
2023-01-24 7:16 ` [PATCH 0/8] soc: amlogic: switch bindings to yaml and adjust some dtbs's Neil Armstrong
@ 2023-01-24 9:20 ` Heiner Kallweit
2023-01-26 7:40 ` Uwe Kleine-König
1 sibling, 0 replies; 26+ messages in thread
From: Heiner Kallweit @ 2023-01-24 9:20 UTC (permalink / raw)
To: Neil Armstrong, Rob Herring, Krzysztof Kozlowski, Kevin Hilman,
Jerome Brunet, Martin Blumenstingl, Alessandro Zummo,
Alexandre Belloni, Thierry Reding, Uwe Kleine-König,
Thomas Gleixner, Marc Zyngier, Linus Walleij
Cc: devicetree, linux-arm-kernel, open list:ARM/Amlogic Meson...,
linux-pwm, linux-rtc, linux-gpio
On 24.01.2023 08:16, Neil Armstrong wrote:
> Hi Heiner,
>
> Le 23/01/2023 à 22:22, Heiner Kallweit a écrit :
>> At first adjust some existing dtbs's so that they pass dtbs_check
>> after switching bindings to yaml.
>
> Thanks for this patchset, but please drop patches 1, 3 & 4, and take
> in account the existing compatible usage in your new bindings like
> I did in my conversion patchset.
>
> While we did remove some bad compatibles we introduced a few years ago,
> now the GXBB, GXL & GXM are now stable a aew LTS releases now and
> a few other projects uses them as-is (U-Boot, BSDs, ...) so changing
> the compatibles isn't an option anymore... and we can't know which
> one they use and how the implementation behaves we must document
> the existing usage without breaking any potential users (including linux).
>
I wasn't aware of this. Thanks for the hint.
So I'll rework the schemas to cover current usage of compatible strings.
> Thanks,
> Neil
>
Heiner
>
>
>>
>> Then switch further Amlogic Meson bindings to yaml.
>> Tested with make targets dt_binding_check and dtbs_check.
>>
>> Heiner Kallweit (8):
>> arm64: dts: meson-gx: Remove invalid pwm compatible
>> arm64: dts: amlogic: Fix non-compliant SD/SDIO node names
>> arm64: dts: meson-gx: Set only one compatible string for mmc
>> arm64: dts: amlogic: Remove invalid compatible string
>> amlogic,meson-gpio-intc
>> dt-bindings: rtc: Add Amlogic Meson vrtc controller binding
>> dt-bindings: pwm: Add Amlogic Meson PWM binding
>> dt-bindings: interrupt-controller: Add Amlogic Meson GPIO interrupt
>> controller binding
>> dt-bindings: pinctrl: Add Amlogic Meson pinctrl binding
>>
>> .../amlogic,meson-gpio-intc.txt | 38 ------
>> .../amlogic,meson-gpio-intc.yaml | 72 +++++++++++
>> .../pinctrl/amlogic,meson-pinctrl.yaml | 121 ++++++++++++++++++
>> .../bindings/pinctrl/meson,pinctrl.txt | 94 --------------
>> .../devicetree/bindings/pwm/pwm-amlogic.yaml | 61 +++++++++
>> .../devicetree/bindings/pwm/pwm-meson.txt | 29 -----
>> .../bindings/rtc/amlogic,meson-vrtc.yaml | 50 ++++++++
>> .../bindings/rtc/rtc-meson-vrtc.txt | 22 ----
>> arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 5 +-
>> .../boot/dts/amlogic/meson-g12-common.dtsi | 7 +-
>> arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 15 +--
>> arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 3 +-
>> arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 3 +-
>> arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 3 +-
>> arch/arm64/boot/dts/amlogic/meson-sm1.dtsi | 3 +-
>> 15 files changed, 320 insertions(+), 206 deletions(-)
>> delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
>> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml
>> create mode 100644 Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl.yaml
>> delete mode 100644 Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
>> create mode 100644 Documentation/devicetree/bindings/pwm/pwm-amlogic.yaml
>> delete mode 100644 Documentation/devicetree/bindings/pwm/pwm-meson.txt
>> create mode 100644 Documentation/devicetree/bindings/rtc/amlogic,meson-vrtc.yaml
>> delete mode 100644 Documentation/devicetree/bindings/rtc/rtc-meson-vrtc.txt
>>
>
>
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 7/8] dt-bindings: interrupt-controller: Add Amlogic Meson GPIO interrupt controller binding
2023-01-24 7:03 ` Heiner Kallweit
@ 2023-01-25 16:46 ` Rob Herring
0 siblings, 0 replies; 26+ messages in thread
From: Rob Herring @ 2023-01-25 16:46 UTC (permalink / raw)
To: Heiner Kallweit
Cc: Thierry Reding, linux-gpio, linux-pwm, Neil Armstrong,
open list:ARM/Amlogic Meson...,
Krzysztof Kozlowski, Thomas Gleixner, Jerome Brunet,
Linus Walleij, linux-rtc, Alexandre Belloni, Alessandro Zummo,
linux-arm-kernel, devicetree, Uwe Kleine-König,
Marc Zyngier, Kevin Hilman, Martin Blumenstingl
On Tue, Jan 24, 2023 at 1:04 AM Heiner Kallweit <hkallweit1@gmail.com> wrote:
>
> On 24.01.2023 02:22, Rob Herring wrote:
> >
> > On Mon, 23 Jan 2023 22:30:08 +0100, Heiner Kallweit wrote:
> >> Add Amlogic Meson GPIO interrupt controller binding.
> >> Tested with make targets dt_binding_check and dtbs_check.
> >>
> >> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
> >> ---
> >> .../amlogic,meson-gpio-intc.txt | 38 ----------
> >> .../amlogic,meson-gpio-intc.yaml | 72 +++++++++++++++++++
> >> 2 files changed, 72 insertions(+), 38 deletions(-)
> >> delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
> >> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml
> >>
> >
> > Running 'make dtbs_check' with the schema in this patch gives the
> > following warnings. Consider if they are expected or the schema is
> > incorrect. These may not be new warnings.
> >
>
> Patch 4 of the series fixes these warnings.
Then you can ignore them.
You did change the binding somewhat and that should be detailed in the
commit message. Granted, the original details on 'compatible' seem to
have a typo and are ambiguous on the order of entries.
> Did you apply the full series?
No, because patchwork doesn't get the full series nor do I see the
full thread when reviewing these bot emails before sending them. If I
see a conversion and warnings that look like the schema should be
fixed rather than the dts files, then you get this email. Though on
further review, dropping 'amlogic,meson-gpio-intc' seems fine given it
is often in the wrong spot (it should be last as it is least
specific).
Rob
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 5/8] dt-bindings: rtc: Add Amlogic Meson vrtc controller binding
2023-01-23 21:28 ` [PATCH 5/8] dt-bindings: rtc: Add Amlogic Meson vrtc controller binding Heiner Kallweit
@ 2023-01-25 19:19 ` Rob Herring
0 siblings, 0 replies; 26+ messages in thread
From: Rob Herring @ 2023-01-25 19:19 UTC (permalink / raw)
To: Heiner Kallweit
Cc: Krzysztof Kozlowski, Neil Armstrong, Kevin Hilman, Jerome Brunet,
Martin Blumenstingl, Alessandro Zummo, Alexandre Belloni,
Thierry Reding, Uwe Kleine-König, Thomas Gleixner,
Marc Zyngier, Linus Walleij, devicetree, linux-arm-kernel,
open list:ARM/Amlogic Meson...,
linux-pwm, linux-rtc, linux-gpio
On Mon, Jan 23, 2023 at 10:28:49PM +0100, Heiner Kallweit wrote:
> Add Amlogic Meson vrtc controller binding.
You are not adding, you are converting.
> Tested with make targets dt_binding_check and dtbs_check.
That's assumed...
>
> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
> ---
> .../bindings/rtc/amlogic,meson-vrtc.yaml | 50 +++++++++++++++++++
> .../bindings/rtc/rtc-meson-vrtc.txt | 22 --------
> 2 files changed, 50 insertions(+), 22 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/rtc/amlogic,meson-vrtc.yaml
> delete mode 100644 Documentation/devicetree/bindings/rtc/rtc-meson-vrtc.txt
>
> diff --git a/Documentation/devicetree/bindings/rtc/amlogic,meson-vrtc.yaml b/Documentation/devicetree/bindings/rtc/amlogic,meson-vrtc.yaml
> new file mode 100644
> index 000000000..26a70b3ce
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/rtc/amlogic,meson-vrtc.yaml
> @@ -0,0 +1,50 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/rtc/amlogic,meson-vrtc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Amlogic Virtual RTC (VRTC)
> +
> +maintainers:
> + - Neil Armstrong <neil.armstrong@linaro.org>
> +
> +description: |
> + This is a Linux interface to an RTC managed by firmware, hence it's
> + virtual from a Linux perspective. The interface is 1 register where
> + an alarm time (in seconds) is to be written.
> + The alarm register is a simple scratch register shared between the
> + application processors (AP) and the secure co-processor (SCP.) When
> + the AP suspends, the SCP will use the value of this register to
> + program an always-on timer before going sleep. When the timer expires,
> + the SCP will wake up and will then wake the AP.
> +
> +allOf:
> + - $ref: rtc.yaml#
> +
> +properties:
> + compatible:
> + enum:
> + - amlogic,meson-vrtc
> +
> + reg:
> + maxItems: 1
> +
> +required:
> + - compatible
> + - reg
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + bus@ff800000 {
> + reg = <0x0 0xff800000 0x0 0x100000>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + rtc@a8 {
> + compatible = "amlogic,meson-vrtc";
> + reg = <0x0 0x000a8 0x0 0x4>;
Just use 1 address/size cell here and then you don't need the bus node
(which has an error in it (no ranges)).
Rob
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 6/8] dt-bindings: pwm: Add Amlogic Meson PWM binding
2023-01-23 21:29 ` [PATCH 6/8] dt-bindings: pwm: Add Amlogic Meson PWM binding Heiner Kallweit
2023-01-24 1:22 ` Rob Herring
@ 2023-01-25 19:22 ` Rob Herring
1 sibling, 0 replies; 26+ messages in thread
From: Rob Herring @ 2023-01-25 19:22 UTC (permalink / raw)
To: Heiner Kallweit
Cc: Krzysztof Kozlowski, Neil Armstrong, Kevin Hilman, Jerome Brunet,
Martin Blumenstingl, Alessandro Zummo, Alexandre Belloni,
Thierry Reding, Uwe Kleine-König, Thomas Gleixner,
Marc Zyngier, Linus Walleij, devicetree, linux-arm-kernel,
open list:ARM/Amlogic Meson...,
linux-pwm, linux-rtc, linux-gpio
On Mon, Jan 23, 2023 at 10:29:27PM +0100, Heiner Kallweit wrote:
> Add Amlogic Meson PWM binding.
> Tested with make targets dt_binding_check and dtbs_check.
>
> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
> ---
> .../devicetree/bindings/pwm/pwm-amlogic.yaml | 61 +++++++++++++++++++
> .../devicetree/bindings/pwm/pwm-meson.txt | 29 ---------
> 2 files changed, 61 insertions(+), 29 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/pwm/pwm-amlogic.yaml
> delete mode 100644 Documentation/devicetree/bindings/pwm/pwm-meson.txt
>
> diff --git a/Documentation/devicetree/bindings/pwm/pwm-amlogic.yaml b/Documentation/devicetree/bindings/pwm/pwm-amlogic.yaml
> new file mode 100644
> index 000000000..443ff4e5b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pwm/pwm-amlogic.yaml
> @@ -0,0 +1,61 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pwm/pwm-amlogic.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Amlogic PWM
> +
> +maintainers:
> + - Heiner Kallweit <hkallweit1@gmail.com>
> +
> +allOf:
> + - $ref: pwm.yaml#
> +
> +properties:
> + compatible:
> + enum:
> + - amlogic,meson8b-pwm
> + - amlogic,meson-gxbb-pwm
> + - amlogic,meson-gxbb-ao-pwm
> + - amlogic,meson-axg-ee-pwm
> + - amlogic,meson-axg-ao-pwm
> + - amlogic,meson-g12a-ee-pwm
> + - amlogic,meson-g12a-ao-pwm-ab
> + - amlogic,meson-g12a-ao-pwm-cd
> + - amlogic,meson-s4-pwm
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
No need for a type, 'clocks' already has one. You need how many and what
each one is when more than 1.
> +
> + clock-names:
> + minItems: 1
> + maxItems: 2
Need the exact names here.
> +
> + "#pwm-cells":
> + const: 3
> +
> +required:
> + - compatible
> + - reg
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + apb@fe000000 {
> + reg = <0x0 0xfe000000 0x0 0x480000>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + pwm@8550 {
> + compatible = "amlogic,meson-gxbb-pwm";
> + reg = <0x0 0x08550 0x0 0x10>;
> + clocks = <&xtal>, <&xtal>;
> + clock-names = "clkin0", "clkin1";
> + #pwm-cells = <3>;
> + };
> + };
> diff --git a/Documentation/devicetree/bindings/pwm/pwm-meson.txt b/Documentation/devicetree/bindings/pwm/pwm-meson.txt
> deleted file mode 100644
> index bd02b0a14..000000000
> --- a/Documentation/devicetree/bindings/pwm/pwm-meson.txt
> +++ /dev/null
> @@ -1,29 +0,0 @@
> -Amlogic Meson PWM Controller
> -============================
> -
> -Required properties:
> -- compatible: Shall contain "amlogic,meson8b-pwm"
> - or "amlogic,meson-gxbb-pwm"
> - or "amlogic,meson-gxbb-ao-pwm"
> - or "amlogic,meson-axg-ee-pwm"
> - or "amlogic,meson-axg-ao-pwm"
> - or "amlogic,meson-g12a-ee-pwm"
> - or "amlogic,meson-g12a-ao-pwm-ab"
> - or "amlogic,meson-g12a-ao-pwm-cd"
> -- #pwm-cells: Should be 3. See pwm.yaml in this directory for a description of
> - the cells format.
> -
> -Optional properties:
> -- clocks: Could contain one or two parents clocks phandle for each of the two
> - PWM channels.
> -- clock-names: Could contain at least the "clkin0" and/or "clkin1" names.
> -
> -Example:
> -
> - pwm_ab: pwm@8550 {
> - compatible = "amlogic,meson-gxbb-pwm";
> - reg = <0x0 0x08550 0x0 0x10>;
> - #pwm-cells = <3>;
> - clocks = <&xtal>, <&xtal>;
> - clock-names = "clkin0", "clkin1";
> - }
> --
> 2.39.1
>
>
^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH v2] dt-bindings: rtc: Convert Amlogic Meson vrtc controller binding
2023-01-23 21:22 [PATCH 0/8] soc: amlogic: switch bindings to yaml and adjust some dtbs's Heiner Kallweit
` (9 preceding siblings ...)
2023-01-24 8:22 ` (subset) " Neil Armstrong
@ 2023-01-25 22:24 ` Heiner Kallweit
2023-01-30 17:09 ` Rob Herring
2023-02-09 22:16 ` (subset) " Alexandre Belloni
2023-06-22 7:57 ` [PATCH 0/8] soc: amlogic: switch bindings to yaml and adjust some dtbs's Neil Armstrong
11 siblings, 2 replies; 26+ messages in thread
From: Heiner Kallweit @ 2023-01-25 22:24 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Neil Armstrong, Kevin Hilman,
Jerome Brunet, Martin Blumenstingl, Alessandro Zummo,
Alexandre Belloni
Cc: devicetree, linux-arm-kernel, open list:ARM/Amlogic Meson..., linux-rtc
Convert Amlogic Meson vrtc controller binding to yaml.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
v2:
- improve title and commit message
- remove bus part from example
---
.../bindings/rtc/amlogic,meson-vrtc.yaml | 44 +++++++++++++++++++
.../bindings/rtc/rtc-meson-vrtc.txt | 22 ----------
2 files changed, 44 insertions(+), 22 deletions(-)
create mode 100644 Documentation/devicetree/bindings/rtc/amlogic,meson-vrtc.yaml
delete mode 100644 Documentation/devicetree/bindings/rtc/rtc-meson-vrtc.txt
diff --git a/Documentation/devicetree/bindings/rtc/amlogic,meson-vrtc.yaml b/Documentation/devicetree/bindings/rtc/amlogic,meson-vrtc.yaml
new file mode 100644
index 000000000..a89865fa6
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/amlogic,meson-vrtc.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/amlogic,meson-vrtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Virtual RTC (VRTC)
+
+maintainers:
+ - Neil Armstrong <neil.armstrong@linaro.org>
+
+description: |
+ This is a Linux interface to an RTC managed by firmware, hence it's
+ virtual from a Linux perspective. The interface is 1 register where
+ an alarm time (in seconds) is to be written.
+ The alarm register is a simple scratch register shared between the
+ application processors (AP) and the secure co-processor (SCP.) When
+ the AP suspends, the SCP will use the value of this register to
+ program an always-on timer before going sleep. When the timer expires,
+ the SCP will wake up and will then wake the AP.
+
+allOf:
+ - $ref: rtc.yaml#
+
+properties:
+ compatible:
+ enum:
+ - amlogic,meson-vrtc
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ rtc@a8 {
+ compatible = "amlogic,meson-vrtc";
+ reg = <0x000a8 0x4>;
+ };
diff --git a/Documentation/devicetree/bindings/rtc/rtc-meson-vrtc.txt b/Documentation/devicetree/bindings/rtc/rtc-meson-vrtc.txt
deleted file mode 100644
index c014f54a9..000000000
--- a/Documentation/devicetree/bindings/rtc/rtc-meson-vrtc.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-* Amlogic Virtual RTC (VRTC)
-
-This is a Linux interface to an RTC managed by firmware, hence it's
-virtual from a Linux perspective. The interface is 1 register where
-an alarm time (in seconds) is to be written.
-
-Required properties:
-- compatible: should be "amlogic,meson-vrtc"
-- reg: physical address for the alarm register
-
-The alarm register is a simple scratch register shared between the
-application processors (AP) and the secure co-processor (SCP.) When
-the AP suspends, the SCP will use the value of this register to
-program an always-on timer before going sleep. When the timer expires,
-the SCP will wake up and will then wake the AP.
-
-Example:
-
- vrtc: rtc@0a8 {
- compatible = "amlogic,meson-vrtc";
- reg = <0x0 0x000a8 0x0 0x4>;
- };
--
2.39.1
^ permalink raw reply related [flat|nested] 26+ messages in thread
* Re: [PATCH 0/8] soc: amlogic: switch bindings to yaml and adjust some dtbs's
2023-01-24 7:16 ` [PATCH 0/8] soc: amlogic: switch bindings to yaml and adjust some dtbs's Neil Armstrong
2023-01-24 9:20 ` Heiner Kallweit
@ 2023-01-26 7:40 ` Uwe Kleine-König
1 sibling, 0 replies; 26+ messages in thread
From: Uwe Kleine-König @ 2023-01-26 7:40 UTC (permalink / raw)
To: Heiner Kallweit
Cc: Neil Armstrong, Rob Herring, Krzysztof Kozlowski, Kevin Hilman,
Jerome Brunet, Martin Blumenstingl, Alessandro Zummo,
Alexandre Belloni, Thierry Reding, Thomas Gleixner, Marc Zyngier,
Linus Walleij, devicetree, linux-arm-kernel,
open list:ARM/Amlogic Meson...,
linux-pwm, linux-rtc, linux-gpio
[-- Attachment #1: Type: text/plain, Size: 2979 bytes --]
Hello,
On Tue, Jan 24, 2023 at 08:16:45AM +0100, Neil Armstrong wrote:
> Le 23/01/2023 à 22:22, Heiner Kallweit a écrit :
> > At first adjust some existing dtbs's so that they pass dtbs_check
> > after switching bindings to yaml.
>
> Thanks for this patchset, but please drop patches 1, 3 & 4, and take
> in account the existing compatible usage in your new bindings like
> I did in my conversion patchset.
>
> While we did remove some bad compatibles we introduced a few years ago,
> now the GXBB, GXL & GXM are now stable a aew LTS releases now and
> a few other projects uses them as-is (U-Boot, BSDs, ...) so changing
> the compatibles isn't an option anymore... and we can't know which
> one they use and how the implementation behaves we must document
> the existing usage without breaking any potential users (including linux).
I only looked into patch #1, and I support dropping it for stronger
reasons than not breaking things which maybe started to rely on the
existing contents.
In patch #1 you write:
| amlogic,meson-gx-pwm isn't a valid compatible string, so remove it.
| See drivers/pwm/pwm-meson.c.
|
| Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
| ---
| arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 8 ++++----
| 1 file changed, 4 insertions(+), 4 deletions(-)
|
| diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
| index a79a35e84..75d35dcfe 100644
| --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
| +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
| @@ -328,14 +328,14 @@ i2c_A: i2c@8500 {
| };
|
| pwm_ab: pwm@8550 {
| - compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
| + compatible = "amlogic,meson-gxbb-pwm";
There are two issues:
a) drivers/pwm/pwm-meson.c isn't the reference. The driver doesn't
justify which compatibles should be used. You should refer to the
binding document instead.
b) Having the SoC name as an additional compatible (i.e. the status quo
before your patch) is an advantage. While it doesn't hurt (apart from
making the dtb a tad bigger) it makes it possible to adapt the driver
if in the future someone discovers that the PWM component on GX is a
tad different from the GXBB one. In that case you can add a check in
the driver à la
if (of_device_is_compatible(np, amlogic,meson-gx-pwm))
do_the_special_gx_handling()
without having to adapt the device trees then (or use some ugly
code that somehow detects if it's running on GX).
So the driver not handling amlogic,meson-gx-pwm today is fine. I expect
the fix to be: Include that compatible in the binding.
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | https://www.pengutronix.de/ |
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH v2] dt-bindings: rtc: Convert Amlogic Meson vrtc controller binding
2023-01-25 22:24 ` [PATCH v2] dt-bindings: rtc: Convert Amlogic Meson vrtc controller binding Heiner Kallweit
@ 2023-01-30 17:09 ` Rob Herring
2023-02-09 22:16 ` (subset) " Alexandre Belloni
1 sibling, 0 replies; 26+ messages in thread
From: Rob Herring @ 2023-01-30 17:09 UTC (permalink / raw)
To: Heiner Kallweit
Cc: Krzysztof Kozlowski, Jerome Brunet, linux-rtc, Rob Herring,
Neil Armstrong, Kevin Hilman, Alexandre Belloni, devicetree,
open list:ARM/Amlogic Meson...,
Alessandro Zummo, Martin Blumenstingl, linux-arm-kernel
On Wed, 25 Jan 2023 23:24:24 +0100, Heiner Kallweit wrote:
> Convert Amlogic Meson vrtc controller binding to yaml.
>
> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
> ---
> v2:
> - improve title and commit message
> - remove bus part from example
> ---
> .../bindings/rtc/amlogic,meson-vrtc.yaml | 44 +++++++++++++++++++
> .../bindings/rtc/rtc-meson-vrtc.txt | 22 ----------
> 2 files changed, 44 insertions(+), 22 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/rtc/amlogic,meson-vrtc.yaml
> delete mode 100644 Documentation/devicetree/bindings/rtc/rtc-meson-vrtc.txt
>
Reviewed-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: (subset) [PATCH v2] dt-bindings: rtc: Convert Amlogic Meson vrtc controller binding
2023-01-25 22:24 ` [PATCH v2] dt-bindings: rtc: Convert Amlogic Meson vrtc controller binding Heiner Kallweit
2023-01-30 17:09 ` Rob Herring
@ 2023-02-09 22:16 ` Alexandre Belloni
1 sibling, 0 replies; 26+ messages in thread
From: Alexandre Belloni @ 2023-02-09 22:16 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Neil Armstrong, Kevin Hilman,
Jerome Brunet, Martin Blumenstingl, Alessandro Zummo,
Heiner Kallweit
Cc: devicetree, linux-arm-kernel, open list:ARM/Amlogic Meson..., linux-rtc
On Wed, 25 Jan 2023 23:24:24 +0100, Heiner Kallweit wrote:
> Convert Amlogic Meson vrtc controller binding to yaml.
>
>
Applied, thanks!
[1/1] dt-bindings: rtc: Convert Amlogic Meson vrtc controller binding
commit: 6a22a5dbc69473c2c46d1a13fe6cbc7bdaacb2a6
--
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 0/8] soc: amlogic: switch bindings to yaml and adjust some dtbs's
2023-01-23 21:22 [PATCH 0/8] soc: amlogic: switch bindings to yaml and adjust some dtbs's Heiner Kallweit
` (10 preceding siblings ...)
2023-01-25 22:24 ` [PATCH v2] dt-bindings: rtc: Convert Amlogic Meson vrtc controller binding Heiner Kallweit
@ 2023-06-22 7:57 ` Neil Armstrong
11 siblings, 0 replies; 26+ messages in thread
From: Neil Armstrong @ 2023-06-22 7:57 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Kevin Hilman, Jerome Brunet,
Martin Blumenstingl, Alessandro Zummo, Alexandre Belloni,
Thierry Reding, Uwe Kleine-König, Thomas Gleixner,
Marc Zyngier, Linus Walleij, Heiner Kallweit
Cc: devicetree, linux-arm-kernel, open list:ARM/Amlogic Meson...,
linux-pwm, linux-rtc, linux-gpio
Hi,
On Mon, 23 Jan 2023 22:22:15 +0100, Heiner Kallweit wrote:
> At first adjust some existing dtbs's so that they pass dtbs_check
> after switching bindings to yaml.
>
> Then switch further Amlogic Meson bindings to yaml.
> Tested with make targets dt_binding_check and dtbs_check.
>
> Heiner Kallweit (8):
> arm64: dts: meson-gx: Remove invalid pwm compatible
> arm64: dts: amlogic: Fix non-compliant SD/SDIO node names
> arm64: dts: meson-gx: Set only one compatible string for mmc
> arm64: dts: amlogic: Remove invalid compatible string
> amlogic,meson-gpio-intc
> dt-bindings: rtc: Add Amlogic Meson vrtc controller binding
> dt-bindings: pwm: Add Amlogic Meson PWM binding
> dt-bindings: interrupt-controller: Add Amlogic Meson GPIO interrupt
> controller binding
> dt-bindings: pinctrl: Add Amlogic Meson pinctrl binding
>
> [...]
Thanks, Applied to https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git (v6.5/drivers)
[1/1] dt-bindings: interrupt-controller: Convert Amlogic Meson GPIO interrupt controller binding
https://git.kernel.org/amlogic/c/6b0139b372d40bd5dafc140b6618b57d13211168
These changes has been applied on the intermediate git tree [1].
The v6.5/drivers branch will then be sent via a formal Pull Request to the Linux SoC maintainers
for inclusion in their intermediate git branches in order to be sent to Linus during
the next merge window, or sooner if it's a set of fixes.
In the cases of fixes, those will be merged in the current release candidate
kernel and as soon they appear on the Linux master branch they will be
backported to the previous Stable and Long-Stable kernels [2].
The intermediate git branches are merged daily in the linux-next tree [3],
people are encouraged testing these pre-release kernels and report issues on the
relevant mailing-lists.
If problems are discovered on those changes, please submit a signed-off-by revert
patch followed by a corrective changeset.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git
[2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
[3] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
--
Neil
^ permalink raw reply [flat|nested] 26+ messages in thread
end of thread, other threads:[~2023-06-22 7:58 UTC | newest]
Thread overview: 26+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-01-23 21:22 [PATCH 0/8] soc: amlogic: switch bindings to yaml and adjust some dtbs's Heiner Kallweit
2023-01-23 21:23 ` [PATCH 1/8] arm64: dts: meson-gx: Remove invalid pwm compatible Heiner Kallweit
2023-01-23 21:24 ` [PATCH 2/8] arm64: dts: amlogic: Fix non-compliant SD/SDIO node names Heiner Kallweit
2023-01-24 7:17 ` Neil Armstrong
2023-01-23 21:25 ` [PATCH 3/8] arm64: dts: meson-gx: Set only one compatible string for mmc Heiner Kallweit
2023-01-23 21:27 ` [PATCH 4/8] arm64: dts: amlogic: Remove invalid compatible string amlogic,meson-gpio-intc Heiner Kallweit
2023-01-23 21:28 ` [PATCH 5/8] dt-bindings: rtc: Add Amlogic Meson vrtc controller binding Heiner Kallweit
2023-01-25 19:19 ` Rob Herring
2023-01-23 21:29 ` [PATCH 6/8] dt-bindings: pwm: Add Amlogic Meson PWM binding Heiner Kallweit
2023-01-24 1:22 ` Rob Herring
2023-01-25 19:22 ` Rob Herring
2023-01-23 21:30 ` [PATCH 7/8] dt-bindings: interrupt-controller: Add Amlogic Meson GPIO interrupt controller binding Heiner Kallweit
2023-01-24 1:22 ` Rob Herring
2023-01-24 7:03 ` Heiner Kallweit
2023-01-25 16:46 ` Rob Herring
2023-01-23 21:30 ` [PATCH 8/8] dt-bindings: pinctrl: Add Amlogic Meson pinctrl binding Heiner Kallweit
2023-01-24 1:22 ` Rob Herring
2023-01-24 7:14 ` Heiner Kallweit
2023-01-24 7:16 ` [PATCH 0/8] soc: amlogic: switch bindings to yaml and adjust some dtbs's Neil Armstrong
2023-01-24 9:20 ` Heiner Kallweit
2023-01-26 7:40 ` Uwe Kleine-König
2023-01-24 8:22 ` (subset) " Neil Armstrong
2023-01-25 22:24 ` [PATCH v2] dt-bindings: rtc: Convert Amlogic Meson vrtc controller binding Heiner Kallweit
2023-01-30 17:09 ` Rob Herring
2023-02-09 22:16 ` (subset) " Alexandre Belloni
2023-06-22 7:57 ` [PATCH 0/8] soc: amlogic: switch bindings to yaml and adjust some dtbs's Neil Armstrong
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).