linux-samsung-soc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v3 0/2] Add support for the S6E3HA2 panel on TM2 board
       [not found] <CGME20161230065850epcas5p3ecad04edde7dfe1f2ad3c86815dcc377@epcas5p3.samsung.com>
@ 2016-12-30  6:58 ` Hoegeun Kwon
       [not found]   ` <CGME20161230065852epcas1p141f5a74e2a8d31e1e9a0ea76c5ac4de3@epcas1p1.samsung.com>
                     ` (2 more replies)
  0 siblings, 3 replies; 4+ messages in thread
From: Hoegeun Kwon @ 2016-12-30  6:58 UTC (permalink / raw)
  To: robh, thierry.reding, airlied, kgene, krzk
  Cc: dri-devel, linux-kernel, devicetree, linux-samsung-soc, a.hajda,
	inki.dae, cw00.choi, jh80.chung, Hoegeun Kwon

Purpose of this patch is add support for S6E3HA2 AMOLED panel on
the TM2 board. The first patch adds support for S6E3HA2 panel
device tree document and driver, the second patch add support for
S6E3HA2 panel device tree.

Changes for V3:

- In the DT binding document, made it clearly that the panel is a
  child node of dsi.
- Fix reset-gpio active from high to low.
- Is the OF graph saying related to [1]?
  Althogh the panel is a child of dsi, I think OF graph necessary.
  because if a remote-endpoint is not specified, the dsi also
  panel is not probed.
- The display-timings has been fixed to be provided by the device
  driver. however, I think display-timings is necessary in dts.
  because if dts does not have display-timings, dsi will not load.

[1]: Documentation/devicetree/bindings/media/video-interfaces.txt

Hoegeun Kwon (1):
  drm/panel: Add support for S6E3HA2 panel driver on TM2 board

Hyungwon Hwang (1):
  arm64: dts: exynos: Add support for S6E3HA2 panel device on TM2 board

 .../bindings/display/panel/samsung,s6e3ha2.txt     |  58 ++
 arch/arm64/boot/dts/exynos/exynos5433-tm2.dts      |  31 +
 drivers/gpu/drm/panel/Kconfig                      |   6 +
 drivers/gpu/drm/panel/Makefile                     |   1 +
 drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c      | 741 +++++++++++++++++++++
 5 files changed, 837 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt
 create mode 100644 drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c

-- 
1.9.1

^ permalink raw reply	[flat|nested] 4+ messages in thread

* [PATCH v3 1/2] drm/panel: Add support for S6E3HA2 panel driver on TM2 board
       [not found]   ` <CGME20161230065852epcas1p141f5a74e2a8d31e1e9a0ea76c5ac4de3@epcas1p1.samsung.com>
@ 2016-12-30  6:58     ` Hoegeun Kwon
  0 siblings, 0 replies; 4+ messages in thread
From: Hoegeun Kwon @ 2016-12-30  6:58 UTC (permalink / raw)
  To: robh, thierry.reding, airlied, kgene, krzk
  Cc: dri-devel, linux-kernel, devicetree, linux-samsung-soc, a.hajda,
	inki.dae, cw00.choi, jh80.chung, Hoegeun Kwon, Donghwa Lee,
	Hyungwon Hwang

This patch add support for MIPI-DSI based S6E3HA2 AMOLED panel
driver. This panel has 1440x2560 resolution in 5.7-inch physical
panel in the TM2 device.

Signed-off-by: Donghwa Lee <dh09.lee@samsung.com>
Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
---
Changes for V3:

- In the DT binding document, made it clearly that the panel is a
  child node of dsi.
- Fix reset-gpio active from high to low.
- Is the OF graph saying related to [1]?
  Althogh the panel is a child of dsi, I think OF graph necessary.
  because if a remote-endpoint is not specified, the dsi also
  panel is not probed.
- The display-timings has been fixed to be provided by the device
  driver. however, I think display-timings is necessary in dts.
  because if dts does not have display-timings, dsi will not load.

[1]: Documentation/devicetree/bindings/media/video-interfaces.txt

 .../bindings/display/panel/samsung,s6e3ha2.txt     |  58 ++
 drivers/gpu/drm/panel/Kconfig                      |   6 +
 drivers/gpu/drm/panel/Makefile                     |   1 +
 drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c      | 741 +++++++++++++++++++++
 4 files changed, 806 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt
 create mode 100644 drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c

diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt b/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt
new file mode 100644
index 0000000..6ce278a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt
@@ -0,0 +1,58 @@
+Samsung S6E3HA2 5.7" 1440x2560 AMOLED panel
+
+Required properties:
+  - compatible: "samsung,s6e3ha2"
+  - reg: the virtual channel number of a DSI peripheral
+  - vdd3-supply: I/O voltage supply
+  - vci-supply: voltage supply for analog circuits
+  - reset-gpios: a GPIO spec for the reset pin (active low)
+  - enable-gpios: a GPIO spec for the panel enable pin (active high)
+  - te-gpios: a GPIO spec for the tearing effect synchronization signal
+    gpio pin (active high)
+
+Optional properties:
+  - display-timings: timings for the connected panel as described by [1]
+
+The device node can contain one 'port' child node with one child
+'endpoint' node, according to the bindings defined in [2]. This
+node should describe panel's video bus.
+
+[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt
+[2]: Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example:
+
+&dsi {
+	...
+
+	panel@0 {
+		compatible = "samsung,s6e3ha2";
+		reg = <0>;
+		vdd3-supply = <&ldo27_reg>;
+		vci-supply = <&ldo28_reg>;
+		reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>;
+		enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
+		te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>;
+
+		display-timings {
+			timing-0 {
+				clock-frequency = <14874444>;
+				hactive = <1440>;
+				vactive = <2560>;
+				hfront-porch = <1>;
+				hback-porch = <1>;
+				hsync-len = <1>;
+				vfront-porch = <1>;
+				vback-porch = <15>;
+				vsync-len = <1>;
+			};
+		};
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
+};
+
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index 62aba97..eea2902 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -52,6 +52,12 @@ config DRM_PANEL_PANASONIC_VVX10F034N00
 	  WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some
 	  Xperia Z2 tablets
 
+config DRM_PANEL_SAMSUNG_S6E3HA2
+	tristate "Samsung S6E3HA2 DSI video mode panel"
+	depends on OF
+	depends on  DRM_MIPI_DSI
+	select VIDEOMODE_HELPERS
+
 config DRM_PANEL_SAMSUNG_S6E8AA0
 	tristate "Samsung S6E8AA0 DSI video mode panel"
 	depends on OF
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index a5c7ec0..1d483b0 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -3,6 +3,7 @@ obj-$(CONFIG_DRM_PANEL_JDI_LT070ME05000) += panel-jdi-lt070me05000.o
 obj-$(CONFIG_DRM_PANEL_LG_LG4573) += panel-lg-lg4573.o
 obj-$(CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00) += panel-panasonic-vvx10f034n00.o
 obj-$(CONFIG_DRM_PANEL_SAMSUNG_LD9040) += panel-samsung-ld9040.o
+obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2) += panel-samsung-s6e3ha2.o
 obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0) += panel-samsung-s6e8aa0.o
 obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o
 obj-$(CONFIG_DRM_PANEL_SHARP_LS043T1LE01) += panel-sharp-ls043t1le01.o
diff --git a/drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c b/drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c
new file mode 100644
index 0000000..8c5a1c2
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c
@@ -0,0 +1,741 @@
+/*
+ * MIPI-DSI based s6e3ha2 AMOLED 5.7 inch panel driver.
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ * Donghwa Lee <dh09.lee@samsung.com>
+ * Hyungwon Hwang <human.hwang@samsung.com>
+ * Hoegeun Kwon <hoegeun.kwon@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <drm/drmP.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_panel.h>
+#include <linux/backlight.h>
+#include <linux/gpio/consumer.h>
+#include <linux/regulator/consumer.h>
+
+#define S6E3HA2_MIN_BRIGHTNESS		0
+#define S6E3HA2_MAX_BRIGHTNESS		100
+#define S6E3HA2_DEFAULT_BRIGHTNESS	80
+
+#define S6E3HA2_NUM_GAMMA_STEPS		46
+#define S6E3HA2_GAMMA_CMD_CNT		35
+#define S6E3HA2_VINT_STATUS_MAX		10
+
+static const u8 gamma_tbl[S6E3HA2_NUM_GAMMA_STEPS][S6E3HA2_GAMMA_CMD_CNT] = {
+	{ 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x89, 0x87, 0x87, 0x82, 0x83,
+	  0x85, 0x88, 0x8b, 0x8b, 0x84, 0x88, 0x82, 0x82, 0x89, 0x86, 0x8c,
+	  0x94, 0x84, 0xb1, 0xaf, 0x8e, 0xcf, 0xad, 0xc9, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x89, 0x87, 0x87, 0x84, 0x84,
+	  0x85, 0x87, 0x8b, 0x8a, 0x84, 0x88, 0x82, 0x82, 0x89, 0x86, 0x8a,
+	  0x93, 0x84, 0xb0, 0xae, 0x8e, 0xc9, 0xa8, 0xc5, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x89, 0x87, 0x87, 0x83, 0x83,
+	  0x85, 0x86, 0x8a, 0x8a, 0x84, 0x88, 0x81, 0x84, 0x8a, 0x88, 0x8a,
+	  0x91, 0x84, 0xb1, 0xae, 0x8b, 0xd5, 0xb2, 0xcc, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x89, 0x87, 0x87, 0x83, 0x83,
+	  0x85, 0x86, 0x8a, 0x8a, 0x84, 0x87, 0x81, 0x84, 0x8a, 0x87, 0x8a,
+	  0x91, 0x85, 0xae, 0xac, 0x8a, 0xc3, 0xa3, 0xc0, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x88, 0x86, 0x87, 0x85, 0x85,
+	  0x86, 0x85, 0x88, 0x89, 0x84, 0x89, 0x82, 0x84, 0x87, 0x85, 0x8b,
+	  0x91, 0x88, 0xad, 0xab, 0x8a, 0xb7, 0x9b, 0xb6, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x89, 0x87, 0x87, 0x83, 0x83,
+	  0x85, 0x86, 0x89, 0x8a, 0x84, 0x89, 0x83, 0x83, 0x86, 0x84, 0x8b,
+	  0x90, 0x84, 0xb0, 0xae, 0x8b, 0xce, 0xad, 0xc8, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x89, 0x87, 0x87, 0x83, 0x83,
+	  0x85, 0x87, 0x89, 0x8a, 0x83, 0x87, 0x82, 0x85, 0x88, 0x87, 0x89,
+	  0x8f, 0x84, 0xac, 0xaa, 0x89, 0xb1, 0x98, 0xaf, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x89, 0x87, 0x87, 0x83, 0x83,
+	  0x85, 0x86, 0x88, 0x89, 0x84, 0x88, 0x83, 0x82, 0x85, 0x84, 0x8c,
+	  0x91, 0x86, 0xac, 0xaa, 0x89, 0xc2, 0xa5, 0xbd, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x88, 0x86, 0x87, 0x84, 0x84,
+	  0x85, 0x87, 0x89, 0x8a, 0x83, 0x87, 0x82, 0x85, 0x88, 0x87, 0x88,
+	  0x8b, 0x82, 0xad, 0xaa, 0x8a, 0xc2, 0xa5, 0xbd, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x89, 0x87, 0x87, 0x83, 0x83,
+	  0x85, 0x86, 0x87, 0x89, 0x84, 0x88, 0x83, 0x82, 0x85, 0x84, 0x8a,
+	  0x8e, 0x84, 0xae, 0xac, 0x89, 0xda, 0xb7, 0xd0, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x88, 0x86, 0x87, 0x84, 0x84,
+	  0x85, 0x86, 0x87, 0x89, 0x84, 0x88, 0x83, 0x80, 0x83, 0x82, 0x8b,
+	  0x8e, 0x85, 0xac, 0xaa, 0x89, 0xc8, 0xaa, 0xc1, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x88, 0x86, 0x87, 0x84, 0x84,
+	  0x85, 0x86, 0x87, 0x89, 0x81, 0x85, 0x81, 0x84, 0x86, 0x84, 0x8c,
+	  0x8c, 0x84, 0xa9, 0xa8, 0x87, 0xa3, 0x92, 0xa1, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x88, 0x86, 0x87, 0x84, 0x84,
+	  0x85, 0x86, 0x87, 0x89, 0x84, 0x86, 0x83, 0x80, 0x83, 0x81, 0x8c,
+	  0x8d, 0x84, 0xaa, 0xaa, 0x89, 0xce, 0xaf, 0xc5, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x88, 0x86, 0x87, 0x84, 0x84,
+	  0x85, 0x86, 0x87, 0x89, 0x81, 0x83, 0x80, 0x83, 0x85, 0x85, 0x8c,
+	  0x8c, 0x84, 0xa8, 0xa8, 0x88, 0xb5, 0x9f, 0xb0, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x88, 0x86, 0x87, 0x84, 0x84,
+	  0x86, 0x86, 0x87, 0x88, 0x81, 0x83, 0x80, 0x83, 0x85, 0x85, 0x8c,
+	  0x8b, 0x84, 0xab, 0xa8, 0x86, 0xd4, 0xb4, 0xc9, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x88, 0x86, 0x87, 0x84, 0x84,
+	  0x86, 0x86, 0x87, 0x88, 0x81, 0x83, 0x80, 0x84, 0x84, 0x85, 0x8b,
+	  0x8a, 0x83, 0xa6, 0xa5, 0x84, 0xbb, 0xa4, 0xb3, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x88, 0x86, 0x87, 0x84, 0x84,
+	  0x86, 0x85, 0x86, 0x86, 0x82, 0x85, 0x81, 0x82, 0x83, 0x84, 0x8e,
+	  0x8b, 0x83, 0xa4, 0xa3, 0x8a, 0xa1, 0x93, 0x9d, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x88, 0x86, 0x87, 0x83, 0x83,
+	  0x85, 0x86, 0x87, 0x87, 0x82, 0x85, 0x81, 0x82, 0x82, 0x84, 0x8e,
+	  0x8b, 0x83, 0xa4, 0xa2, 0x86, 0xc1, 0xa9, 0xb7, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x88, 0x86, 0x87, 0x83, 0x83,
+	  0x85, 0x86, 0x87, 0x87, 0x82, 0x85, 0x81, 0x82, 0x82, 0x84, 0x8d,
+	  0x89, 0x82, 0xa2, 0xa1, 0x84, 0xa7, 0x98, 0xa1, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xb8, 0x00, 0xc3, 0x00, 0xb1, 0x88, 0x86, 0x87, 0x83, 0x83,
+	  0x85, 0x86, 0x87, 0x87, 0x82, 0x85, 0x81, 0x83, 0x83, 0x85, 0x8c,
+	  0x87, 0x7f, 0xa2, 0x9d, 0x88, 0x8d, 0x88, 0x8b, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xbb, 0x00, 0xc5, 0x00, 0xb4, 0x87, 0x86, 0x86, 0x84, 0x83,
+	  0x86, 0x87, 0x87, 0x87, 0x80, 0x82, 0x7f, 0x86, 0x86, 0x88, 0x8a,
+	  0x84, 0x7e, 0x9d, 0x9c, 0x82, 0x8d, 0x88, 0x8b, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xbd, 0x00, 0xc7, 0x00, 0xb7, 0x87, 0x85, 0x85, 0x84, 0x83,
+	  0x86, 0x86, 0x86, 0x88, 0x81, 0x83, 0x80, 0x83, 0x84, 0x85, 0x8a,
+	  0x85, 0x7e, 0x9c, 0x9b, 0x85, 0x80, 0x80, 0x80, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xc0, 0x00, 0xca, 0x00, 0xbb, 0x87, 0x86, 0x85, 0x83, 0x83,
+	  0x85, 0x86, 0x86, 0x88, 0x81, 0x83, 0x80, 0x84, 0x85, 0x86, 0x89,
+	  0x83, 0x7d, 0x9c, 0x99, 0x87, 0x7b, 0x7b, 0x7c, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xc4, 0x00, 0xcd, 0x00, 0xbe, 0x87, 0x86, 0x85, 0x83, 0x83,
+	  0x86, 0x85, 0x85, 0x87, 0x81, 0x82, 0x80, 0x82, 0x82, 0x83, 0x8a,
+	  0x85, 0x7f, 0x9f, 0x9b, 0x86, 0xb4, 0xa1, 0xac, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xc7, 0x00, 0xd0, 0x00, 0xc2, 0x87, 0x85, 0x85, 0x83, 0x82,
+	  0x85, 0x85, 0x85, 0x86, 0x82, 0x83, 0x80, 0x82, 0x82, 0x84, 0x87,
+	  0x86, 0x80, 0x9e, 0x9a, 0x87, 0xa7, 0x98, 0xa1, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xca, 0x00, 0xd2, 0x00, 0xc5, 0x87, 0x85, 0x84, 0x82, 0x82,
+	  0x84, 0x85, 0x85, 0x86, 0x81, 0x82, 0x7f, 0x82, 0x82, 0x84, 0x88,
+	  0x86, 0x81, 0x9d, 0x98, 0x86, 0x8d, 0x88, 0x8b, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xce, 0x00, 0xd6, 0x00, 0xca, 0x86, 0x85, 0x84, 0x83, 0x83,
+	  0x85, 0x84, 0x84, 0x85, 0x81, 0x82, 0x80, 0x81, 0x81, 0x82, 0x89,
+	  0x86, 0x81, 0x9c, 0x97, 0x86, 0xa7, 0x98, 0xa1, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xd1, 0x00, 0xd9, 0x00, 0xce, 0x86, 0x84, 0x83, 0x83, 0x82,
+	  0x85, 0x85, 0x85, 0x86, 0x81, 0x83, 0x81, 0x82, 0x82, 0x83, 0x86,
+	  0x83, 0x7f, 0x99, 0x95, 0x86, 0xbb, 0xa4, 0xb3, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xd4, 0x00, 0xdb, 0x00, 0xd1, 0x86, 0x85, 0x83, 0x83, 0x82,
+	  0x85, 0x84, 0x84, 0x85, 0x80, 0x83, 0x82, 0x80, 0x80, 0x81, 0x87,
+	  0x84, 0x81, 0x98, 0x93, 0x85, 0xae, 0x9c, 0xa8, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xd8, 0x00, 0xde, 0x00, 0xd6, 0x86, 0x84, 0x83, 0x81, 0x81,
+	  0x83, 0x85, 0x85, 0x85, 0x82, 0x83, 0x81, 0x81, 0x81, 0x83, 0x86,
+	  0x84, 0x80, 0x98, 0x91, 0x85, 0x7b, 0x7b, 0x7c, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xdc, 0x00, 0xe2, 0x00, 0xda, 0x85, 0x84, 0x83, 0x82, 0x82,
+	  0x84, 0x84, 0x84, 0x85, 0x81, 0x82, 0x82, 0x80, 0x80, 0x81, 0x83,
+	  0x82, 0x7f, 0x99, 0x93, 0x86, 0x94, 0x8b, 0x92, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xdf, 0x00, 0xe5, 0x00, 0xde, 0x85, 0x84, 0x82, 0x82, 0x82,
+	  0x84, 0x83, 0x83, 0x84, 0x81, 0x81, 0x80, 0x83, 0x82, 0x84, 0x82,
+	  0x81, 0x7f, 0x99, 0x92, 0x86, 0x7b, 0x7b, 0x7c, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xe4, 0x00, 0xe9, 0x00, 0xe3, 0x84, 0x83, 0x82, 0x81, 0x81,
+	  0x82, 0x83, 0x83, 0x84, 0x80, 0x81, 0x80, 0x83, 0x83, 0x84, 0x80,
+	  0x81, 0x7c, 0x99, 0x92, 0x87, 0xa1, 0x93, 0x9d, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xe4, 0x00, 0xe9, 0x00, 0xe3, 0x85, 0x84, 0x83, 0x81, 0x81,
+	  0x82, 0x82, 0x82, 0x83, 0x80, 0x81, 0x80, 0x81, 0x80, 0x82, 0x83,
+	  0x82, 0x80, 0x91, 0x8d, 0x83, 0x9a, 0x90, 0x96, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xe4, 0x00, 0xe9, 0x00, 0xe3, 0x84, 0x83, 0x82, 0x81, 0x81,
+	  0x82, 0x83, 0x83, 0x84, 0x80, 0x81, 0x80, 0x81, 0x80, 0x82, 0x83,
+	  0x81, 0x7f, 0x91, 0x8c, 0x82, 0x8d, 0x88, 0x8b, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xe4, 0x00, 0xe9, 0x00, 0xe3, 0x84, 0x83, 0x82, 0x81, 0x81,
+	  0x82, 0x83, 0x83, 0x83, 0x82, 0x82, 0x81, 0x81, 0x80, 0x82, 0x82,
+	  0x82, 0x7f, 0x94, 0x89, 0x84, 0x80, 0x80, 0x80, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xe4, 0x00, 0xe9, 0x00, 0xe3, 0x84, 0x83, 0x82, 0x81, 0x81,
+	  0x82, 0x83, 0x83, 0x83, 0x82, 0x82, 0x81, 0x81, 0x80, 0x82, 0x83,
+	  0x82, 0x7f, 0x91, 0x85, 0x81, 0x80, 0x80, 0x80, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xe4, 0x00, 0xe9, 0x00, 0xe3, 0x84, 0x83, 0x82, 0x81, 0x81,
+	  0x82, 0x83, 0x83, 0x83, 0x80, 0x80, 0x7f, 0x83, 0x82, 0x84, 0x83,
+	  0x82, 0x7f, 0x90, 0x84, 0x81, 0x9a, 0x90, 0x96, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xe4, 0x00, 0xe9, 0x00, 0xe3, 0x84, 0x83, 0x82, 0x80, 0x80,
+	  0x82, 0x83, 0x83, 0x83, 0x80, 0x80, 0x7f, 0x80, 0x80, 0x81, 0x81,
+	  0x82, 0x83, 0x7e, 0x80, 0x7c, 0xa4, 0x97, 0x9f, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xe9, 0x00, 0xec, 0x00, 0xe8, 0x84, 0x83, 0x82, 0x81, 0x81,
+	  0x82, 0x82, 0x82, 0x83, 0x7f, 0x7f, 0x7f, 0x81, 0x80, 0x82, 0x83,
+	  0x83, 0x84, 0x79, 0x7c, 0x79, 0xb1, 0xa0, 0xaa, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xed, 0x00, 0xf0, 0x00, 0xec, 0x83, 0x83, 0x82, 0x80, 0x80,
+	  0x81, 0x82, 0x82, 0x82, 0x7f, 0x7f, 0x7e, 0x81, 0x81, 0x82, 0x80,
+	  0x81, 0x81, 0x84, 0x84, 0x83, 0x80, 0x80, 0x80, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xf1, 0x00, 0xf4, 0x00, 0xf1, 0x83, 0x82, 0x82, 0x80, 0x80,
+	  0x81, 0x82, 0x82, 0x82, 0x80, 0x80, 0x80, 0x80, 0x80, 0x81, 0x7d,
+	  0x7e, 0x7f, 0x84, 0x84, 0x83, 0x80, 0x80, 0x80, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xf6, 0x00, 0xf7, 0x00, 0xf5, 0x82, 0x82, 0x81, 0x80, 0x80,
+	  0x80, 0x82, 0x82, 0x82, 0x80, 0x80, 0x80, 0x7f, 0x7f, 0x7f, 0x82,
+	  0x82, 0x82, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x00, 0xfa, 0x00, 0xfb, 0x00, 0xfa, 0x81, 0x81, 0x81, 0x80, 0x80,
+	  0x80, 0x82, 0x82, 0x82, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80,
+	  0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x01, 0x00, 0x01, 0x00, 0x01, 0x00, 0x80, 0x80, 0x80, 0x80, 0x80,
+	  0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80,
+	  0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x00, 0x00, 0x00,
+	  0x00, 0x00 },
+	{ 0x01, 0x00, 0x01, 0x00, 0x01, 0x00, 0x80, 0x80, 0x80, 0x80, 0x80,
+	  0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80,
+	  0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x00, 0x00, 0x00,
+	  0x00, 0x00 }
+};
+
+unsigned char vint_table[S6E3HA2_VINT_STATUS_MAX] = {
+	0x18, 0x19, 0x1a, 0x1b, 0x1c,
+	0x1d, 0x1e, 0x1f, 0x20, 0x21
+};
+
+struct s6e3ha2 {
+	struct device *dev;
+	struct drm_panel panel;
+	struct backlight_device *bl_dev;
+
+	struct regulator_bulk_data supplies[2];
+	struct gpio_desc *reset_gpio;
+	struct gpio_desc *enable_gpio;
+
+	/* This field is tested by functions directly accessing DSI bus before
+	 * transfer, transfer is skipped if it is set. In case of transfer
+	 * failure or unexpected response the field is set to error value.
+	 * Such construct allows to eliminate many checks in higher level
+	 * functions.
+	 */
+	int error;
+};
+
+static int  s6e3ha2_clear_error(struct s6e3ha2 *ctx)
+{
+	int ret = ctx->error;
+
+	ctx->error = 0;
+	return ret;
+}
+
+static void s6e3ha2_dcs_write(struct s6e3ha2 *ctx, const void *data, size_t len)
+{
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+	ssize_t ret;
+
+	if (ctx->error < 0)
+		return;
+
+	ret = mipi_dsi_dcs_write_buffer(dsi, data, len);
+	if (ret < 0) {
+		dev_err(ctx->dev, "error %zd writing dcs seq: %*ph\n",
+						ret, (int)len, data);
+		ctx->error = ret;
+	}
+}
+
+#define s6e3ha2_dcs_write_seq_static(ctx, seq...) do {	\
+	static const u8 d[] = { seq };			\
+	s6e3ha2_dcs_write(ctx, d, ARRAY_SIZE(d));	\
+} while (0)
+
+static void s6e3ha2_test_key_on_f0(struct s6e3ha2 *ctx)
+{
+	s6e3ha2_dcs_write_seq_static(ctx, 0xf0, 0x5a, 0x5a);
+}
+
+static void s6e3ha2_test_key_off_f0(struct s6e3ha2 *ctx)
+{
+	s6e3ha2_dcs_write_seq_static(ctx, 0xf0, 0xa5, 0xa5);
+}
+
+static void s6e3ha2_test_key_on_fc(struct s6e3ha2 *ctx)
+{
+	s6e3ha2_dcs_write_seq_static(ctx, 0xfc, 0x5a, 0x5a);
+}
+
+static void s6e3ha2_test_key_off_fc(struct s6e3ha2 *ctx)
+{
+	s6e3ha2_dcs_write_seq_static(ctx, 0xfc, 0xa5, 0xa5);
+}
+
+static void s6e3ha2_single_dsi_set(struct s6e3ha2 *ctx)
+{
+	s6e3ha2_dcs_write_seq_static(ctx, 0xf2, 0x67);
+	s6e3ha2_dcs_write_seq_static(ctx, 0xf9, 0x09);
+}
+
+static void s6e3ha2_freq_calibration(struct s6e3ha2 *ctx)
+{
+	s6e3ha2_dcs_write_seq_static(ctx, 0xfd, 0x1c);
+	s6e3ha2_dcs_write_seq_static(ctx, 0xfe, 0x20, 0x39);
+	s6e3ha2_dcs_write_seq_static(ctx, 0xfe, 0xa0);
+	s6e3ha2_dcs_write_seq_static(ctx, 0xfe, 0x20);
+	s6e3ha2_dcs_write_seq_static(ctx, 0xce, 0x03, 0x3b, 0x12, 0x62,
+		0x40, 0x80, 0xc0, 0x28, 0x28, 0x28, 0x28, 0x39, 0xc5);
+}
+
+static void s6e3ha2_aor_control(struct s6e3ha2 *ctx)
+{
+	s6e3ha2_dcs_write_seq_static(ctx, 0xb2, 0x03, 0x10);
+}
+
+static void s6e3ha2_caps_elvss_set(struct s6e3ha2 *ctx)
+{
+	s6e3ha2_dcs_write_seq_static(ctx, 0xb6, 0x9c, 0x0a);
+}
+
+static void s6e3ha2_acl_off(struct s6e3ha2 *ctx)
+{
+	s6e3ha2_dcs_write_seq_static(ctx, 0x55, 0x00);
+}
+
+static void s6e3ha2_acl_off_opr(struct s6e3ha2 *ctx)
+{
+	s6e3ha2_dcs_write_seq_static(ctx, 0xb5, 0x40);
+}
+
+static void s6e3ha2_test_global(struct s6e3ha2 *ctx)
+{
+	s6e3ha2_dcs_write_seq_static(ctx, 0xb0, 0x07);
+}
+
+static void s6e3ha2_test(struct s6e3ha2 *ctx)
+{
+	s6e3ha2_dcs_write_seq_static(ctx, 0xb8, 0x19);
+}
+
+static void s6e3ha2_touch_hsync_on1(struct s6e3ha2 *ctx)
+{
+	s6e3ha2_dcs_write_seq_static(ctx,
+			0xbd, 0x33, 0x11, 0x02, 0x16, 0x02, 0x16);
+}
+
+static void s6e3ha2_pentile_control(struct s6e3ha2 *ctx)
+{
+	s6e3ha2_dcs_write_seq_static(ctx, 0xc0, 0x00, 0x00, 0xd8, 0xd8);
+}
+
+static void s6e3ha2_poc_global(struct s6e3ha2 *ctx)
+{
+	s6e3ha2_dcs_write_seq_static(ctx, 0xb0, 0x20);
+}
+
+static void s6e3ha2_poc_setting(struct s6e3ha2 *ctx)
+{
+	s6e3ha2_dcs_write_seq_static(ctx, 0xfe, 0x08);
+}
+
+static void s6e3ha2_pcd_set_off(struct s6e3ha2 *ctx)
+{
+	s6e3ha2_dcs_write_seq_static(ctx, 0xcc, 0x40, 0x51);
+}
+
+static void s6e3ha2_err_fg_set(struct s6e3ha2 *ctx)
+{
+	s6e3ha2_dcs_write_seq_static(ctx, 0xed, 0x44);
+}
+
+static void s6e3ha2_hbm_off(struct s6e3ha2 *ctx)
+{
+	s6e3ha2_dcs_write_seq_static(ctx, 0x53, 0x00);
+}
+
+static void s6e3ha2_te_start_setting(struct s6e3ha2 *ctx)
+{
+	s6e3ha2_dcs_write_seq_static(ctx, 0xb9, 0x10, 0x09, 0xff, 0x00, 0x09);
+}
+
+static void s6e3ha2_gamma_update(struct s6e3ha2 *ctx)
+{
+	s6e3ha2_dcs_write_seq_static(ctx, 0xf7, 0x03);
+	ndelay(100); /* need for 100ns delay */
+	s6e3ha2_dcs_write_seq_static(ctx, 0xf7, 0x00);
+}
+
+static int s6e3ha2_get_brightness(struct backlight_device *bl_dev)
+{
+	return bl_dev->props.brightness;
+}
+
+static void s6e3ha2_set_vint(struct s6e3ha2 *ctx)
+{
+	struct backlight_device *bl_dev = ctx->bl_dev;
+	unsigned int brightness = bl_dev->props.brightness;
+	unsigned char data[] = { 0xf4, 0x8b,
+			vint_table[brightness * (S6E3HA2_VINT_STATUS_MAX - 1) /
+			S6E3HA2_MAX_BRIGHTNESS] };
+
+	s6e3ha2_dcs_write(ctx, data, 3);
+}
+
+static unsigned int s6e3ha2_get_brightness_index(unsigned int brightness)
+{
+	return (brightness * (S6E3HA2_NUM_GAMMA_STEPS - 1)) /
+		S6E3HA2_MAX_BRIGHTNESS;
+}
+
+static int s6e3ha2_update_gamma(struct s6e3ha2 *ctx, unsigned int brightness)
+{
+	struct backlight_device *bl_dev = ctx->bl_dev;
+	unsigned int index = s6e3ha2_get_brightness_index(brightness);
+	u8 data[S6E3HA2_GAMMA_CMD_CNT + 1] = { 0xca, };
+
+	memcpy(data + 1, gamma_tbl + index, S6E3HA2_GAMMA_CMD_CNT);
+	s6e3ha2_dcs_write(ctx, data, ARRAY_SIZE(data));
+
+	s6e3ha2_gamma_update(ctx);
+	bl_dev->props.brightness = brightness;
+
+	return 0;
+}
+
+static int s6e3ha2_set_brightness(struct backlight_device *bl_dev)
+{
+	struct s6e3ha2 *ctx = (struct s6e3ha2 *)bl_get_data(bl_dev);
+	unsigned int brightness = bl_dev->props.brightness;
+
+	if (brightness < S6E3HA2_MIN_BRIGHTNESS ||
+		brightness > bl_dev->props.max_brightness) {
+		dev_err(ctx->dev, "Invalid brightness: %u\n", brightness);
+		return -EINVAL;
+	}
+
+	if (bl_dev->props.power > FB_BLANK_NORMAL)
+		return -EPERM;
+
+	s6e3ha2_test_key_on_f0(ctx);
+	s6e3ha2_update_gamma(ctx, brightness);
+	s6e3ha2_aor_control(ctx);
+	s6e3ha2_set_vint(ctx);
+	s6e3ha2_test_key_off_f0(ctx);
+
+	return ctx->error;
+}
+
+static const struct backlight_ops s6e3ha2_bl_ops = {
+	.get_brightness = s6e3ha2_get_brightness,
+	.update_status = s6e3ha2_set_brightness,
+};
+
+static void s6e3ha2_panel_init(struct s6e3ha2 *ctx)
+{
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+
+	mipi_dsi_dcs_exit_sleep_mode(dsi);
+	usleep_range(5000, 6000);
+
+	s6e3ha2_test_key_on_f0(ctx);
+	s6e3ha2_single_dsi_set(ctx);
+	s6e3ha2_test_key_on_fc(ctx);
+	s6e3ha2_freq_calibration(ctx);
+	s6e3ha2_test_key_off_fc(ctx);
+	s6e3ha2_test_key_off_f0(ctx);
+}
+
+static int s6e3ha2_power_off(struct s6e3ha2 *ctx)
+{
+	return regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+}
+
+static int s6e3ha2_disable(struct drm_panel *panel)
+{
+	struct s6e3ha2 *ctx = container_of(panel, struct s6e3ha2, panel);
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+
+	mipi_dsi_dcs_enter_sleep_mode(dsi);
+	if (ctx->error != 0)
+		goto err;
+
+	mipi_dsi_dcs_set_display_off(dsi);
+	if (ctx->error != 0)
+		goto err;
+
+	msleep(40);
+	ctx->bl_dev->props.power = FB_BLANK_NORMAL;
+
+	return 0;
+err:
+	return ctx->error;
+}
+
+static int s6e3ha2_unprepare(struct drm_panel *panel)
+{
+	struct s6e3ha2 *ctx = container_of(panel, struct s6e3ha2, panel);
+	int ret;
+
+	ret = s6e3ha2_clear_error(ctx);
+	if (!ret)
+		ctx->bl_dev->props.power = FB_BLANK_POWERDOWN;
+
+	return s6e3ha2_power_off(ctx);
+}
+
+static int s6e3ha2_power_on(struct s6e3ha2 *ctx)
+{
+	int ret;
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+	if (ret < 0)
+		return ret;
+
+	msleep(120);
+
+	gpiod_set_value(ctx->enable_gpio, 0);
+	usleep_range(5000, 6000);
+	gpiod_set_value(ctx->enable_gpio, 1);
+
+	gpiod_set_value(ctx->reset_gpio, 1);
+	usleep_range(5000, 6000);
+	gpiod_set_value(ctx->reset_gpio, 0);
+	usleep_range(5000, 6000);
+
+	return 0;
+}
+static int s6e3ha2_prepare(struct drm_panel *panel)
+{
+	struct s6e3ha2 *ctx = container_of(panel, struct s6e3ha2, panel);
+	int ret;
+
+	ret = s6e3ha2_power_on(ctx);
+	if (ret < 0)
+		return ret;
+
+	s6e3ha2_panel_init(ctx);
+
+	ret = s6e3ha2_clear_error(ctx);
+	if (ret < 0) {
+		s6e3ha2_power_off(ctx);
+		return ret;
+	}
+
+	ctx->bl_dev->props.power = FB_BLANK_NORMAL;
+
+	return 0;
+}
+
+static int s6e3ha2_enable(struct drm_panel *panel)
+{
+	struct s6e3ha2 *ctx = container_of(panel, struct s6e3ha2, panel);
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+
+	/* common setting */
+	mipi_dsi_dcs_set_tear_on(dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
+
+	s6e3ha2_test_key_on_f0(ctx);
+	s6e3ha2_test_key_on_fc(ctx);
+	s6e3ha2_touch_hsync_on1(ctx);
+	s6e3ha2_pentile_control(ctx);
+	s6e3ha2_poc_global(ctx);
+	s6e3ha2_poc_setting(ctx);
+	s6e3ha2_test_key_off_fc(ctx);
+
+	/* pcd setting off for TB */
+	s6e3ha2_pcd_set_off(ctx);
+	s6e3ha2_err_fg_set(ctx);
+	s6e3ha2_te_start_setting(ctx);
+
+	/* brightness setting */
+	s6e3ha2_set_brightness(ctx->bl_dev);
+	s6e3ha2_aor_control(ctx);
+	s6e3ha2_caps_elvss_set(ctx);
+	s6e3ha2_gamma_update(ctx);
+	s6e3ha2_acl_off(ctx);
+	s6e3ha2_acl_off_opr(ctx);
+	s6e3ha2_hbm_off(ctx);
+
+	/* elvss temp compensation */
+	s6e3ha2_test_global(ctx);
+	s6e3ha2_test(ctx);
+	s6e3ha2_test_key_off_f0(ctx);
+
+	mipi_dsi_dcs_set_display_on(dsi);
+	if (ctx->error != 0)
+		return ctx->error;
+
+	ctx->bl_dev->props.power = FB_BLANK_UNBLANK;
+
+	return 0;
+}
+
+static const struct drm_display_mode default_mode = {
+	.clock = 14874,
+	.hdisplay = 1440,
+	.hsync_start = 1440 + 1,
+	.hsync_end = 1440 + 1 + 1,
+	.htotal = 1440 + 1 + 1 + 1,
+	.vdisplay = 2560,
+	.vsync_start = 2560 + 1,
+	.vsync_end = 2560 + 1 + 1,
+	.vtotal = 2560 + 1 + 1 + 15,
+	.vrefresh = 60,
+	.flags = 0,
+};
+
+static int s6e3ha2_get_modes(struct drm_panel *panel)
+{
+	struct drm_connector *connector = panel->connector;
+	struct drm_display_mode *mode;
+
+	mode = drm_mode_duplicate(panel->drm, &default_mode);
+	if (!mode) {
+		DRM_ERROR("failed to create a new display mode\n");
+		DRM_ERROR("failed to add mode %ux%ux@%u\n",
+				default_mode.hdisplay, default_mode.vdisplay,
+				default_mode.vrefresh);
+		return -ENOMEM;
+	}
+
+	drm_mode_set_name(mode);
+
+	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+	drm_mode_probed_add(connector, mode);
+
+	connector->display_info.width_mm = 71;
+	connector->display_info.height_mm = 125;
+
+	return 1;
+}
+
+static const struct drm_panel_funcs s6e3ha2_drm_funcs = {
+	.disable = s6e3ha2_disable,
+	.unprepare = s6e3ha2_unprepare,
+	.prepare = s6e3ha2_prepare,
+	.enable = s6e3ha2_enable,
+	.get_modes = s6e3ha2_get_modes,
+};
+
+static int s6e3ha2_probe(struct mipi_dsi_device *dsi)
+{
+	struct device *dev = &dsi->dev;
+	struct s6e3ha2 *ctx;
+	int ret;
+
+	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+
+	mipi_dsi_set_drvdata(dsi, ctx);
+
+	ctx->dev = dev;
+
+	dsi->lanes = 4;
+	dsi->format = MIPI_DSI_FMT_RGB888;
+	dsi->mode_flags = MIPI_DSI_CLOCK_NON_CONTINUOUS;
+
+	ctx->supplies[0].supply = "vdd3";
+	ctx->supplies[1].supply = "vci";
+
+	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies),
+				      ctx->supplies);
+	if (ret < 0) {
+		dev_err(dev, "failed to get regulators: %d\n", ret);
+		return ret;
+	}
+
+	ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(ctx->reset_gpio)) {
+		dev_err(dev, "cannot get reset-gpios %ld\n",
+			PTR_ERR(ctx->reset_gpio));
+		return PTR_ERR(ctx->reset_gpio);
+	}
+
+	ctx->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_HIGH);
+	if (IS_ERR(ctx->enable_gpio)) {
+		dev_err(dev, "cannot get enable-gpios %ld\n",
+			PTR_ERR(ctx->enable_gpio));
+		return PTR_ERR(ctx->enable_gpio);
+	}
+
+	ctx->bl_dev = backlight_device_register("s6e3ha2", dev, ctx,
+						&s6e3ha2_bl_ops, NULL);
+	if (IS_ERR(ctx->bl_dev)) {
+		dev_err(dev, "failed to register backlight device\n");
+		return PTR_ERR(ctx->bl_dev);
+	}
+
+	ctx->bl_dev->props.max_brightness = S6E3HA2_MAX_BRIGHTNESS;
+	ctx->bl_dev->props.brightness = S6E3HA2_DEFAULT_BRIGHTNESS;
+	ctx->bl_dev->props.power = FB_BLANK_POWERDOWN;
+
+	drm_panel_init(&ctx->panel);
+	ctx->panel.dev = dev;
+	ctx->panel.funcs = &s6e3ha2_drm_funcs;
+
+	ret = drm_panel_add(&ctx->panel);
+	if (ret < 0)
+		goto unregister_backlight;
+
+	ret = mipi_dsi_attach(dsi);
+	if (ret < 0)
+		goto remove_panel;
+
+	return ret;
+
+remove_panel:
+	drm_panel_remove(&ctx->panel);
+
+unregister_backlight:
+	backlight_device_unregister(ctx->bl_dev);
+
+	return ret;
+}
+
+static int s6e3ha2_remove(struct mipi_dsi_device *dsi)
+{
+	struct s6e3ha2 *ctx = mipi_dsi_get_drvdata(dsi);
+
+	mipi_dsi_detach(dsi);
+	drm_panel_remove(&ctx->panel);
+	backlight_device_unregister(ctx->bl_dev);
+
+	return 0;
+}
+
+static const struct of_device_id s6e3ha2_of_match[] = {
+	{ .compatible = "samsung,s6e3ha2" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, s6e3ha2_of_match);
+
+static struct mipi_dsi_driver s6e3ha2_driver = {
+	.probe = s6e3ha2_probe,
+	.remove = s6e3ha2_remove,
+	.driver = {
+		.name = "panel-samsung-s6e3ha2",
+		.of_match_table = s6e3ha2_of_match,
+	},
+};
+module_mipi_dsi_driver(s6e3ha2_driver);
+
+MODULE_AUTHOR("Donghwa Lee <dh09.lee@samsung.com>");
+MODULE_AUTHOR("Hyungwon Hwang <human.hwang@samsung.com>");
+MODULE_AUTHOR("Hoegeun Kwon <hoegeun.kwon@samsung.com>");
+MODULE_DESCRIPTION("MIPI-DSI based s6e3ha2 AMOLED Panel Driver");
+MODULE_LICENSE("GPL v2");
-- 
1.9.1

^ permalink raw reply related	[flat|nested] 4+ messages in thread

* [PATCH v3 2/2] arm64: dts: exynos: Add support for S6E3HA2 panel device on TM2 board
       [not found]   ` <CGME20161230065853epcas5p3e2056666d15fa2b132701bfaed3caea8@epcas5p3.samsung.com>
@ 2016-12-30  6:58     ` Hoegeun Kwon
  0 siblings, 0 replies; 4+ messages in thread
From: Hoegeun Kwon @ 2016-12-30  6:58 UTC (permalink / raw)
  To: robh, thierry.reding, airlied, kgene, krzk
  Cc: dri-devel, linux-kernel, devicetree, linux-samsung-soc, a.hajda,
	inki.dae, cw00.choi, jh80.chung, Hyungwon Hwang, Hoegeun Kwon

From: Hyungwon Hwang <human.hwang@samsung.com>

This patch add the panel device tree node for S6E3HA2 display
controller to TM2 dts.

Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
---
 arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 31 +++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
index db879f4..7434b22 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
@@ -252,11 +252,42 @@
 			reg = <1>;
 
 			dsi_out: endpoint {
+				remote-endpoint = <&panel_in>;
 				samsung,burst-clock-frequency = <512000000>;
 				samsung,esc-clock-frequency = <16000000>;
 			};
 		};
 	};
+
+	panel@0 {
+		compatible = "samsung,s6e3ha2";
+		reg = <0>;
+		vdd3-supply = <&ldo27_reg>;
+		vci-supply = <&ldo28_reg>;
+		reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>;
+		enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
+		te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>;
+
+		display-timings {
+			timing-0 {
+				clock-frequency = <14874444>;
+				hactive = <1440>;
+				vactive = <2560>;
+				hfront-porch = <1>;
+				hback-porch = <1>;
+				hsync-len = <1>;
+				vfront-porch = <1>;
+				vback-porch = <15>;
+				vsync-len = <1>;
+			};
+		};
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
 };
 
 &hsi2c_0 {
-- 
1.9.1

^ permalink raw reply related	[flat|nested] 4+ messages in thread

* Re: [PATCH v3 0/2] Add support for the S6E3HA2 panel on TM2 board
  2016-12-30  6:58 ` [PATCH v3 0/2] Add support for the S6E3HA2 panel on TM2 board Hoegeun Kwon
       [not found]   ` <CGME20161230065852epcas1p141f5a74e2a8d31e1e9a0ea76c5ac4de3@epcas1p1.samsung.com>
       [not found]   ` <CGME20161230065853epcas5p3e2056666d15fa2b132701bfaed3caea8@epcas5p3.samsung.com>
@ 2017-01-02 12:06   ` Andrzej Hajda
  2 siblings, 0 replies; 4+ messages in thread
From: Andrzej Hajda @ 2017-01-02 12:06 UTC (permalink / raw)
  To: Hoegeun Kwon, robh, thierry.reding, airlied, kgene, krzk
  Cc: dri-devel, linux-kernel, devicetree, linux-samsung-soc, inki.dae,
	cw00.choi, jh80.chung

On 30.12.2016 07:58, Hoegeun Kwon wrote:
> Purpose of this patch is add support for S6E3HA2 AMOLED panel on
> the TM2 board. The first patch adds support for S6E3HA2 panel
> device tree document and driver, the second patch add support for
> S6E3HA2 panel device tree.
>
> Changes for V3:
>
> - In the DT binding document, made it clearly that the panel is a
>   child node of dsi.
> - Fix reset-gpio active from high to low.
> - Is the OF graph saying related to [1]?

Yes, video-interfaces described in [1] are OF graphs described in [2]
with additional properties specific for video pipelines.

[2]: Documentation/devicetree/bindings/graph.txt

>   Althogh the panel is a child of dsi, I think OF graph necessary.
>   because if a remote-endpoint is not specified, the dsi also
>   panel is not probed.

OK, I see the issue: dsi driver requires presence of DSI_PORT_OUT
endpoint, because it needs to read MIPI-DSI burst and esc clock
frequencies from these nodes, however it does not use it to get panel
node, panel node is get by .attach callback. Probably these clock
frequencies should be passed via struct mipi_dsi_device.
So as for now I think it would be simpler to leave OF graph, as it is
already used this way in other drivers.

> - The display-timings has been fixed to be provided by the device
>   driver. however, I think display-timings is necessary in dts.
>   because if dts does not have display-timings, dsi will not load.

After examining drivers it looks like these timings, beside panel, are
read by MIC driver, and this is wrong. MIC driver shouldn't peek into
other driver's nodes, it can use DRM callbacks (mode_fixup, mode_set) to
get necessary information. And more importantly display-timings in
panels are not accepted by panels maintainer AFAIK, see [1] for rationale.

[1]:
https://sietch-tagr.blogspot.de/2016/04/display-panels-are-not-special.html

Regards
Andrzej

>
> [1]: Documentation/devicetree/bindings/media/video-interfaces.txt
>
> Hoegeun Kwon (1):
>   drm/panel: Add support for S6E3HA2 panel driver on TM2 board
>
> Hyungwon Hwang (1):
>   arm64: dts: exynos: Add support for S6E3HA2 panel device on TM2 board
>
>  .../bindings/display/panel/samsung,s6e3ha2.txt     |  58 ++
>  arch/arm64/boot/dts/exynos/exynos5433-tm2.dts      |  31 +
>  drivers/gpu/drm/panel/Kconfig                      |   6 +
>  drivers/gpu/drm/panel/Makefile                     |   1 +
>  drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c      | 741 +++++++++++++++++++++
>  5 files changed, 837 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt
>  create mode 100644 drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c
>

^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2017-01-02 12:06 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
     [not found] <CGME20161230065850epcas5p3ecad04edde7dfe1f2ad3c86815dcc377@epcas5p3.samsung.com>
2016-12-30  6:58 ` [PATCH v3 0/2] Add support for the S6E3HA2 panel on TM2 board Hoegeun Kwon
     [not found]   ` <CGME20161230065852epcas1p141f5a74e2a8d31e1e9a0ea76c5ac4de3@epcas1p1.samsung.com>
2016-12-30  6:58     ` [PATCH v3 1/2] drm/panel: Add support for S6E3HA2 panel driver " Hoegeun Kwon
     [not found]   ` <CGME20161230065853epcas5p3e2056666d15fa2b132701bfaed3caea8@epcas5p3.samsung.com>
2016-12-30  6:58     ` [PATCH v3 2/2] arm64: dts: exynos: Add support for S6E3HA2 panel device " Hoegeun Kwon
2017-01-02 12:06   ` [PATCH v3 0/2] Add support for the S6E3HA2 panel " Andrzej Hajda

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).