From: himanshu.madhani@oracle.com
To: Nilesh Javali <njavali@marvell.com>, martin.petersen@oracle.com
Cc: linux-scsi@vger.kernel.org, GR-QLogic-Storage-Upstream@marvell.com
Subject: Re: [PATCH 3/3] qla2xxx: Pass SCM counters to the application.
Date: Thu, 14 May 2020 14:15:40 -0500 [thread overview]
Message-ID: <1970ba0e-8c7c-3e8e-3478-10a4e7fb693d@oracle.com> (raw)
In-Reply-To: <20200514101026.10040-4-njavali@marvell.com>
On 5/14/20 5:10 AM, Nilesh Javali wrote:
> From: Shyam Sundar <ssundar@marvell.com>
>
> Implement 3 functions to pass on SAN congestion management
> related counters tracked by the driver, up to the Marvell
> application using the BSG interface.
>
> Signed-off-by: Shyam Sundar <ssundar@marvell.com>
> Signed-off-by: Arun Easi <aeasi@marvell.com>
> Signed-off-by: Nilesh Javali <njavali@marvell.com>
> ---
> drivers/scsi/qla2xxx/qla_bsg.c | 114 +++++++++++++++++++++++++++++++++
> drivers/scsi/qla2xxx/qla_bsg.h | 3 +
> 2 files changed, 117 insertions(+)
>
> diff --git a/drivers/scsi/qla2xxx/qla_bsg.c b/drivers/scsi/qla2xxx/qla_bsg.c
> index 97b51c477972..bd898bbdd44d 100644
> --- a/drivers/scsi/qla2xxx/qla_bsg.c
> +++ b/drivers/scsi/qla2xxx/qla_bsg.c
> @@ -2446,6 +2446,111 @@ qla2x00_get_flash_image_status(struct bsg_job *bsg_job)
> return 0;
> }
>
> +static int
> +qla2x00_get_drv_attr(struct bsg_job *bsg_job)
> +{
> + struct qla_drv_attr drv_attr;
> + struct fc_bsg_reply *bsg_reply = bsg_job->reply;
> +
> + memset(&drv_attr, 0, sizeof(struct qla_drv_attr));
> + /* Additional check should be added if SCM is not enabled
> + * by default for a given driver version.
> + */
> + drv_attr.attributes |= QLA_DRV_ATTR_SCM_SUPPORTED;
> +
> + sg_copy_from_buffer(bsg_job->reply_payload.sg_list,
> + bsg_job->reply_payload.sg_cnt, &drv_attr,
> + sizeof(struct qla_drv_attr));
> +
> + bsg_reply->reply_payload_rcv_len = sizeof(struct qla_drv_attr);
> + bsg_reply->reply_data.vendor_reply.vendor_rsp[0] = EXT_STATUS_OK;
> +
> + bsg_job->reply_len = sizeof(*bsg_job->reply);
> + bsg_reply->result = DID_OK << 16;
> + bsg_job_done(bsg_job, bsg_reply->result,
> + bsg_reply->reply_payload_rcv_len);
> +
> + return 0;
> +}
> +
> +static int
> +qla2x00_get_port_scm(struct bsg_job *bsg_job)
> +{
> + struct Scsi_Host *shost = fc_bsg_to_shost(bsg_job);
> + scsi_qla_host_t *vha = shost_priv(shost);
> + struct qla_hw_data *ha = vha->hw;
> + struct fc_bsg_reply *bsg_reply = bsg_job->reply;
> +
> + if (!IS_QLA27XX(ha) && !IS_QLA28XX(ha))
> + return -EPERM;
> +
> + sg_copy_from_buffer(bsg_job->reply_payload.sg_list,
> + bsg_job->reply_payload.sg_cnt, &vha->scm_stats,
> + sizeof(struct qla_scm_port));
> +
> + bsg_reply->reply_payload_rcv_len = sizeof(struct qla_scm_port);
> + bsg_reply->reply_data.vendor_reply.vendor_rsp[0] = EXT_STATUS_OK;
> +
> + bsg_job->reply_len = sizeof(*bsg_job->reply);
> + bsg_reply->result = DID_OK << 16;
> + bsg_job_done(bsg_job, bsg_reply->result,
> + bsg_reply->reply_payload_rcv_len);
> +
> + return 0;
> +}
> +
> +static int
> +qla2x00_get_target_scm(struct bsg_job *bsg_job)
> +{
> + struct Scsi_Host *shost = fc_bsg_to_shost(bsg_job);
> + scsi_qla_host_t *vha = shost_priv(shost);
> + struct fc_bsg_reply *bsg_reply = bsg_job->reply;
> + struct qla_hw_data *ha = vha->hw;
> + fc_port_t *fcport = NULL;
> + int rval;
> + struct qla_scm_target *scm_stats = NULL;
> +
> + if (!IS_QLA27XX(ha) && !IS_QLA28XX(ha))
> + return -EPERM;
> +
> + scm_stats = kzalloc(sizeof(*scm_stats), GFP_KERNEL);
> + if (!scm_stats) {
> + ql_log(ql_log_warn, vha, 0x7024,
> + "Failed to allocate memory for target scm stats.\n");
> + return -ENOMEM;
> + }
> +
> + sg_copy_to_buffer(bsg_job->request_payload.sg_list,
> + bsg_job->request_payload.sg_cnt, scm_stats,
> + sizeof(struct qla_scm_target));
> +
> + fcport = qla2x00_find_fcport_by_wwpn(vha, scm_stats->wwpn, 0);
> + if (fcport) {
> + /* Copy SCM Target data to local struct, keep WWPN from user */
> + memcpy(&scm_stats->current_events,
> + &fcport->scm_stats.current_events,
> + (sizeof(struct qla_scm_target) -
> + sizeof(scm_stats->wwpn)));
> + sg_copy_from_buffer(bsg_job->reply_payload.sg_list,
> + bsg_job->reply_payload.sg_cnt, scm_stats,
> + sizeof(struct qla_scm_target));
> + rval = EXT_STATUS_OK;
> + } else {
> + rval = EXT_STATUS_ERR;
> + }
> +
> + bsg_reply->reply_payload_rcv_len = sizeof(struct qla_scm_target);
> + bsg_reply->reply_data.vendor_reply.vendor_rsp[0] = rval;
> +
> + bsg_job->reply_len = sizeof(*bsg_job->reply);
> + bsg_reply->result = DID_OK << 16;
> + bsg_job_done(bsg_job, bsg_reply->result,
> + bsg_reply->reply_payload_rcv_len);
> +
> + kfree(scm_stats);
> + return 0;
> +}
> +
> static int
> qla2x00_process_vendor_specific(struct bsg_job *bsg_job)
> {
> @@ -2522,6 +2627,15 @@ qla2x00_process_vendor_specific(struct bsg_job *bsg_job)
> case QL_VND_SS_GET_FLASH_IMAGE_STATUS:
> return qla2x00_get_flash_image_status(bsg_job);
>
> + case QL_VND_GET_PORT_SCM:
> + return qla2x00_get_port_scm(bsg_job);
> +
> + case QL_VND_GET_TARGET_SCM:
> + return qla2x00_get_target_scm(bsg_job);
> +
> + case QL_VND_GET_DRV_ATTR:
> + return qla2x00_get_drv_attr(bsg_job);
> +
> default:
> return -ENOSYS;
> }
> diff --git a/drivers/scsi/qla2xxx/qla_bsg.h b/drivers/scsi/qla2xxx/qla_bsg.h
> index 0b308859047c..c7cf5f772ad3 100644
> --- a/drivers/scsi/qla2xxx/qla_bsg.h
> +++ b/drivers/scsi/qla2xxx/qla_bsg.h
> @@ -32,6 +32,9 @@
> #define QL_VND_DPORT_DIAGNOSTICS 0x19
> #define QL_VND_GET_PRIV_STATS_EX 0x1A
> #define QL_VND_SS_GET_FLASH_IMAGE_STATUS 0x1E
> +#define QL_VND_GET_PORT_SCM 0x20
> +#define QL_VND_GET_TARGET_SCM 0x21
> +#define QL_VND_GET_DRV_ATTR 0x22
>
> /* BSG Vendor specific subcode returns */
> #define EXT_STATUS_OK 0
>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
--
Himanshu Madhani
Oracle Linux Engineering
next prev parent reply other threads:[~2020-05-14 19:17 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-14 10:10 [PATCH 0/3] qla2xxx SAN Congestion Management (SCM) support Nilesh Javali
2020-05-14 10:10 ` [PATCH 1/3] qla2xxx: Change in PUREX to handle FPIN ELS requests Nilesh Javali
2020-05-14 17:03 ` himanshu.madhani
2020-05-15 18:52 ` James Smart
2020-05-14 10:10 ` [PATCH 2/3] qla2xxx: SAN congestion management(SCM) implementation Nilesh Javali
2020-05-14 18:52 ` himanshu.madhani
2020-05-15 22:48 ` James Smart
[not found] ` <CA+ihqdiA7AN05k5MjPG=o8_pf=L-La6UigY4t0emKgJMXm=hnQ@mail.gmail.com>
[not found] ` <BYAPR18MB2805AEA357302FCFA20D2B57B48F0@BYAPR18MB2805.namprd18.prod.outlook.com>
2020-06-11 17:42 ` Shyam Sundar
2020-06-25 23:25 ` James Smart
2020-06-26 0:14 ` Shyam Sundar
2020-07-30 16:10 ` Shyam Sundar
2020-09-21 17:48 ` James Smart
[not found] ` <CA+ihqdjtoA=1q7N0pg1TQDAMGo1XtNN8+XnO1qXORyqGYfpq=A@mail.gmail.com>
2020-06-11 18:10 ` Shyam S
2020-05-14 10:10 ` [PATCH 3/3] qla2xxx: Pass SCM counters to the application Nilesh Javali
2020-05-14 19:15 ` himanshu.madhani [this message]
2020-05-14 14:11 ` [PATCH 0/3] qla2xxx SAN Congestion Management (SCM) support Bart Van Assche
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1970ba0e-8c7c-3e8e-3478-10a4e7fb693d@oracle.com \
--to=himanshu.madhani@oracle.com \
--cc=GR-QLogic-Storage-Upstream@marvell.com \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=njavali@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).