* [PATCH trivial] scsi: Fix various misspellings of "connect"
@ 2019-10-24 15:26 Geert Uytterhoeven
2019-10-25 1:23 ` Martin K. Petersen
0 siblings, 1 reply; 2+ messages in thread
From: Geert Uytterhoeven @ 2019-10-24 15:26 UTC (permalink / raw)
To: Russell King, James E . J . Bottomley, Martin K . Petersen,
GOTO Masanori, YOKOTA Hiroshi, Jiri Kosina
Cc: linux-arm-kernel, linux-scsi, linux-kernel, Geert Uytterhoeven
Fix misspellings of "disonnect", "reconnect", "connection", "connected",
and "disconnection".
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
drivers/scsi/arm/acornscsi.c | 4 ++--
drivers/scsi/bnx2fc/57xx_hsi_bnx2fc.h | 2 +-
drivers/scsi/isci/remote_device.c | 2 +-
drivers/scsi/ncr53c8xx.c | 2 +-
drivers/scsi/nsp32.c | 2 +-
drivers/scsi/qedf/qedf_dbg.h | 2 +-
drivers/scsi/qedi/qedi_dbg.h | 2 +-
7 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/scsi/arm/acornscsi.c b/drivers/scsi/arm/acornscsi.c
index d12dd89538df2990..ddb52e7ba6226b51 100644
--- a/drivers/scsi/arm/acornscsi.c
+++ b/drivers/scsi/arm/acornscsi.c
@@ -1067,7 +1067,7 @@ void acornscsi_dma_setup(AS_Host *host, dmadir_t direction)
* Purpose : ensure that all DMA transfers are up-to-date & host->scsi.SCp is correct
* Params : host - host to finish
* Notes : This is called when a command is:
- * terminating, RESTORE_POINTERS, SAVE_POINTERS, DISCONECT
+ * terminating, RESTORE_POINTERS, SAVE_POINTERS, DISCONNECT
* : This must not return until all transfers are completed.
*/
static
@@ -1816,7 +1816,7 @@ int acornscsi_reconnect(AS_Host *host)
}
/*
- * Function: int acornscsi_reconect_finish(AS_Host *host)
+ * Function: int acornscsi_reconnect_finish(AS_Host *host)
* Purpose : finish reconnecting a command
* Params : host - host to complete
* Returns : 0 if failed
diff --git a/drivers/scsi/bnx2fc/57xx_hsi_bnx2fc.h b/drivers/scsi/bnx2fc/57xx_hsi_bnx2fc.h
index e4469df9c4695ab9..698f5ebaa0c29f98 100644
--- a/drivers/scsi/bnx2fc/57xx_hsi_bnx2fc.h
+++ b/drivers/scsi/bnx2fc/57xx_hsi_bnx2fc.h
@@ -813,7 +813,7 @@ struct fcoe_confqe {
/*
- * FCoE conection data base
+ * FCoE connection data base
*/
struct fcoe_conn_db {
#if defined(__BIG_ENDIAN)
diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c
index 49aa4e657c44fc65..cd1e4b4d95bbbba0 100644
--- a/drivers/scsi/isci/remote_device.c
+++ b/drivers/scsi/isci/remote_device.c
@@ -1504,7 +1504,7 @@ static enum sci_status isci_remote_device_construct(struct isci_port *iport,
* This function builds the isci_remote_device when a libsas dev_found message
* is received.
* @isci_host: This parameter specifies the isci host object.
- * @port: This parameter specifies the isci_port conected to this device.
+ * @port: This parameter specifies the isci_port connected to this device.
*
* pointer to new isci_remote_device.
*/
diff --git a/drivers/scsi/ncr53c8xx.c b/drivers/scsi/ncr53c8xx.c
index e0b427fdf81800c3..11a2cb844ecb3782 100644
--- a/drivers/scsi/ncr53c8xx.c
+++ b/drivers/scsi/ncr53c8xx.c
@@ -1722,7 +1722,7 @@ struct ncb {
** Miscellaneous configuration and status parameters.
**----------------------------------------------------------------
*/
- u_char disc; /* Diconnection allowed */
+ u_char disc; /* Disconnection allowed */
u_char scsi_mode; /* Current SCSI BUS mode */
u_char order; /* Tag order to use */
u_char verbose; /* Verbosity for this controller*/
diff --git a/drivers/scsi/nsp32.c b/drivers/scsi/nsp32.c
index 70db79254155677d..b6e04d14292d2f90 100644
--- a/drivers/scsi/nsp32.c
+++ b/drivers/scsi/nsp32.c
@@ -1542,7 +1542,7 @@ static void nsp32_scsi_done(struct scsi_cmnd *SCpnt)
* with ACK reply when below condition is matched:
* MsgIn 00: Command Complete.
* MsgIn 02: Save Data Pointer.
- * MsgIn 04: Diconnect.
+ * MsgIn 04: Disconnect.
* In other case, unexpected BUSFREE is detected.
*/
static int nsp32_busfree_occur(struct scsi_cmnd *SCpnt, unsigned short execph)
diff --git a/drivers/scsi/qedf/qedf_dbg.h b/drivers/scsi/qedf/qedf_dbg.h
index d979f095aeda06a8..2386bfb73c4616aa 100644
--- a/drivers/scsi/qedf/qedf_dbg.h
+++ b/drivers/scsi/qedf/qedf_dbg.h
@@ -42,7 +42,7 @@ extern uint qedf_debug;
#define QEDF_LOG_LPORT 0x4000 /* lport logs */
#define QEDF_LOG_ELS 0x8000 /* ELS logs */
#define QEDF_LOG_NPIV 0x10000 /* NPIV logs */
-#define QEDF_LOG_SESS 0x20000 /* Conection setup, cleanup */
+#define QEDF_LOG_SESS 0x20000 /* Connection setup, cleanup */
#define QEDF_LOG_TID 0x80000 /*
* FW TID context acquire
* free
diff --git a/drivers/scsi/qedi/qedi_dbg.h b/drivers/scsi/qedi/qedi_dbg.h
index 243acc8b520a44a5..37d084086fd43410 100644
--- a/drivers/scsi/qedi/qedi_dbg.h
+++ b/drivers/scsi/qedi/qedi_dbg.h
@@ -44,7 +44,7 @@ extern uint qedi_dbg_log;
#define QEDI_LOG_LPORT 0x4000 /* lport logs */
#define QEDI_LOG_ELS 0x8000 /* ELS logs */
#define QEDI_LOG_NPIV 0x10000 /* NPIV logs */
-#define QEDI_LOG_SESS 0x20000 /* Conection setup, cleanup */
+#define QEDI_LOG_SESS 0x20000 /* Connection setup, cleanup */
#define QEDI_LOG_UIO 0x40000 /* iSCSI UIO logs */
#define QEDI_LOG_TID 0x80000 /* FW TID context acquire,
* free
--
2.17.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH trivial] scsi: Fix various misspellings of "connect"
2019-10-24 15:26 [PATCH trivial] scsi: Fix various misspellings of "connect" Geert Uytterhoeven
@ 2019-10-25 1:23 ` Martin K. Petersen
0 siblings, 0 replies; 2+ messages in thread
From: Martin K. Petersen @ 2019-10-25 1:23 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: Russell King, James E . J . Bottomley, Martin K . Petersen,
GOTO Masanori, YOKOTA Hiroshi, Jiri Kosina, linux-arm-kernel,
linux-scsi, linux-kernel
Geert,
> Fix misspellings of "disonnect", "reconnect", "connection",
> "connected", and "disconnection".
Applied to 5.5/scsi-queue, thanks!
--
Martin K. Petersen Oracle Linux Engineering
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-10-25 1:26 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-10-24 15:26 [PATCH trivial] scsi: Fix various misspellings of "connect" Geert Uytterhoeven
2019-10-25 1:23 ` Martin K. Petersen
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).