linux-scsi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Hannes Reinecke <hare@suse.de>
To: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>,
	James Bottomley <james.bottomley@hansenpartnership.com>,
	linux-scsi@vger.kernel.org, Hannes Reinecke <hare@suse.de>
Subject: [PATCH 09/24] scsi: Kill obsolete linux-specific status codes
Date: Thu, 31 Oct 2019 12:04:37 +0100	[thread overview]
Message-ID: <20191031110452.73463-10-hare@suse.de> (raw)
In-Reply-To: <20191031110452.73463-1-hare@suse.de>

After several years it's time to finally kill them.

Signed-off-by: Hannes Reinecke <hare@suse.de>
---
 include/scsi/scsi_proto.h | 19 -------------------
 1 file changed, 19 deletions(-)

diff --git a/include/scsi/scsi_proto.h b/include/scsi/scsi_proto.h
index c36860111932..660f37ce8721 100644
--- a/include/scsi/scsi_proto.h
+++ b/include/scsi/scsi_proto.h
@@ -202,25 +202,6 @@ struct scsi_varlen_cdb_hdr {
 #define SAM_STAT_ACA_ACTIVE      0x30
 #define SAM_STAT_TASK_ABORTED    0x40
 
-/*
- *  Status codes. These are deprecated as they are shifted 1 bit right
- *  from those found in the SCSI standards. This causes confusion for
- *  applications that are ported to several OSes. Prefer SAM Status codes
- *  above.
- */
-
-#define GOOD                 0x00
-#define CHECK_CONDITION      0x01
-#define CONDITION_GOOD       0x02
-#define BUSY                 0x04
-#define INTERMEDIATE_GOOD    0x08
-#define INTERMEDIATE_C_GOOD  0x0a
-#define RESERVATION_CONFLICT 0x0c
-#define COMMAND_TERMINATED   0x11
-#define QUEUE_FULL           0x14
-#define ACA_ACTIVE           0x18
-#define TASK_ABORTED         0x20
-
 #define STATUS_MASK          0xfe
 
 /*
-- 
2.16.4


  parent reply	other threads:[~2019-10-31 11:05 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-31 11:04 [PATCHv2 00/24] Revamp SCSI result values Hannes Reinecke
2019-10-31 11:04 ` [PATCH 01/24] aic7xxx,aic79xxx: remove driver-defined SAM status definitions Hannes Reinecke
2019-11-01 16:14   ` Bart Van Assche
2019-10-31 11:04 ` [PATCH 02/24] bfa: drop driver-defined SCSI status codes Hannes Reinecke
2019-11-01 16:15   ` Bart Van Assche
2019-10-31 11:04 ` [PATCH 03/24] wd33c93: use SCSI status Hannes Reinecke
2019-11-01 16:16   ` Bart Van Assche
2019-10-31 11:04 ` [PATCH 04/24] acornscsi: use standard defines Hannes Reinecke
2019-11-01 16:18   ` Bart Van Assche
2019-11-01 16:40     ` Hannes Reinecke
2019-10-31 11:04 ` [PATCH 05/24] scsi: use standard SAM status codes Hannes Reinecke
2019-11-01 16:26   ` Bart Van Assche
2019-11-01 16:54     ` Hannes Reinecke
2019-11-01 18:10       ` Bart Van Assche
2019-10-31 11:04 ` [PATCH 06/24] scsi: change status_byte() to return the standard SCSI status Hannes Reinecke
2019-10-31 11:04 ` [PATCH 07/24] target_core: Fixup target_complete_cmd() usage Hannes Reinecke
2019-11-01 16:29   ` Bart Van Assche
2019-10-31 11:04 ` [PATCH 08/24] sg: use SAM status definitions and avoid using masked_status Hannes Reinecke
2019-10-31 11:04 ` Hannes Reinecke [this message]
2019-11-02 13:14   ` [PATCH 09/24] scsi: Kill obsolete linux-specific status codes kbuild test robot
2019-10-31 11:04 ` [PATCH 10/24] scsi: introduce set_status_byte() Hannes Reinecke
2019-11-01 16:36   ` Bart Van Assche
2019-10-31 11:04 ` [PATCH 11/24] advansys: kill driver_defined status byte accessors Hannes Reinecke
2019-10-31 11:04 ` [PATCH 12/24] scsi: introduce scsi_build_sense() Hannes Reinecke
2019-11-01 16:35   ` Bart Van Assche
2019-10-31 11:04 ` [PATCH 13/24] scsi: Kill DRIVER_SENSE Hannes Reinecke
2019-10-31 11:04 ` [PATCH 14/24] scsi: Kill DRIVER_HARD Hannes Reinecke
2019-10-31 11:04 ` [PATCH 15/24] scsi_error: use DID_TIME_OUT instead of DRIVER_TIMEOUT Hannes Reinecke
2019-10-31 11:04 ` [PATCH 16/24] scsi: Kill DRIVER_TIMEOUT Hannes Reinecke
2019-10-31 11:04 ` [PATCH 17/24] scsi: do not use DRIVER_INVALID Hannes Reinecke
2019-11-02  3:28   ` Finn Thain
2019-10-31 11:04 ` [PATCH 18/24] st: return error code in st_scsi_execute() Hannes Reinecke
2019-10-31 11:04 ` [PATCH 19/24] scsi_ioctl: return error code when blk_rq_map_kern() fails Hannes Reinecke
2019-10-31 11:04 ` [PATCH 20/24] scsi_dh_alua: do not interpret DRIVER_ERROR Hannes Reinecke
2019-10-31 11:04 ` [PATCH 21/24] xen-scsiback: stop using DRIVER_ERROR Hannes Reinecke
2019-10-31 11:04 ` [PATCH 22/24] scsi: " Hannes Reinecke
2019-10-31 11:04 ` [PATCH 23/24] scsi: Kill DRIVER_MEDIA, DRIVER_SOFT, and DRIVER_BUSY Hannes Reinecke
2019-10-31 11:04 ` [PATCH 24/24] scsi: Drop the now obsolete driver_byte definitions Hannes Reinecke
  -- strict thread matches above, loose matches on Subject: below --
2019-10-21  9:52 [PATCH RFC 00/24] scsi: Revamp result values Hannes Reinecke
2019-10-21  9:53 ` [PATCH 09/24] scsi: Kill obsolete linux-specific status codes Hannes Reinecke
2019-10-21 18:12   ` kbuild test robot
2019-10-21 18:56   ` kbuild test robot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191031110452.73463-10-hare@suse.de \
    --to=hare@suse.de \
    --cc=hch@lst.de \
    --cc=james.bottomley@hansenpartnership.com \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).