From: Hannes Reinecke <hare@suse.de>
To: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>,
James Bottomley <james.bottomley@hansenpartnership.com>,
linux-scsi@vger.kernel.org, Hannes Reinecke <hare@suse.de>
Subject: [PATCH 02/24] bfa: drop driver-defined SCSI status codes
Date: Thu, 31 Oct 2019 12:04:30 +0100 [thread overview]
Message-ID: <20191031110452.73463-3-hare@suse.de> (raw)
In-Reply-To: <20191031110452.73463-1-hare@suse.de>
Drop the driver-defined SCSI status code and use the generic ones
instead.
Signed-off-by: Hannes Reinecke <hare@suse.de>
---
drivers/scsi/bfa/bfa_fc.h | 15 ---------------
drivers/scsi/bfa/bfa_fcpim.c | 2 +-
drivers/scsi/bfa/bfad_im.c | 2 +-
3 files changed, 2 insertions(+), 17 deletions(-)
diff --git a/drivers/scsi/bfa/bfa_fc.h b/drivers/scsi/bfa/bfa_fc.h
index b00fb2409c50..d536270bbe9f 100644
--- a/drivers/scsi/bfa/bfa_fc.h
+++ b/drivers/scsi/bfa/bfa_fc.h
@@ -33,21 +33,6 @@ struct scsi_cdb_s {
u8 scsi_cdb[SCSI_MAX_CDBLEN];
};
-/* ------------------------------------------------------------
- * SCSI status byte values
- * ------------------------------------------------------------
- */
-#define SCSI_STATUS_GOOD 0x00
-#define SCSI_STATUS_CHECK_CONDITION 0x02
-#define SCSI_STATUS_CONDITION_MET 0x04
-#define SCSI_STATUS_BUSY 0x08
-#define SCSI_STATUS_INTERMEDIATE 0x10
-#define SCSI_STATUS_ICM 0x14 /* intermediate condition met */
-#define SCSI_STATUS_RESERVATION_CONFLICT 0x18
-#define SCSI_STATUS_COMMAND_TERMINATED 0x22
-#define SCSI_STATUS_QUEUE_FULL 0x28
-#define SCSI_STATUS_ACA_ACTIVE 0x30
-
#define SCSI_MAX_ALLOC_LEN 0xFF /* maximum allocarion length */
/*
diff --git a/drivers/scsi/bfa/bfa_fcpim.c b/drivers/scsi/bfa/bfa_fcpim.c
index 284baa3b0c8e..997b54f5eb5c 100644
--- a/drivers/scsi/bfa/bfa_fcpim.c
+++ b/drivers/scsi/bfa/bfa_fcpim.c
@@ -2146,7 +2146,7 @@ __bfa_cb_ioim_comp(void *cbarg, bfa_boolean_t complete)
/*
* setup sense information, if present
*/
- if ((m->scsi_status == SCSI_STATUS_CHECK_CONDITION) &&
+ if ((m->scsi_status == SAM_STAT_CHECK_CONDITION) &&
m->sns_len) {
sns_len = m->sns_len;
snsinfo = BFA_SNSINFO_FROM_TAG(ioim->fcpim->fcp,
diff --git a/drivers/scsi/bfa/bfad_im.c b/drivers/scsi/bfa/bfad_im.c
index 22f06be2606f..6b5841b1c06e 100644
--- a/drivers/scsi/bfa/bfad_im.c
+++ b/drivers/scsi/bfa/bfad_im.c
@@ -106,7 +106,7 @@ bfa_cb_ioim_good_comp(void *drv, struct bfad_ioim_s *dio)
struct bfad_itnim_data_s *itnim_data;
struct bfad_itnim_s *itnim;
- cmnd->result = DID_OK << 16 | SCSI_STATUS_GOOD;
+ cmnd->result = DID_OK << 16 | SAM_STAT_GOOD;
/* Unmap DMA, if host is NULL, it means a scsi passthru cmd */
if (cmnd->device->host != NULL)
--
2.16.4
next prev parent reply other threads:[~2019-10-31 11:05 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-31 11:04 [PATCHv2 00/24] Revamp SCSI result values Hannes Reinecke
2019-10-31 11:04 ` [PATCH 01/24] aic7xxx,aic79xxx: remove driver-defined SAM status definitions Hannes Reinecke
2019-11-01 16:14 ` Bart Van Assche
2019-10-31 11:04 ` Hannes Reinecke [this message]
2019-11-01 16:15 ` [PATCH 02/24] bfa: drop driver-defined SCSI status codes Bart Van Assche
2019-10-31 11:04 ` [PATCH 03/24] wd33c93: use SCSI status Hannes Reinecke
2019-11-01 16:16 ` Bart Van Assche
2019-10-31 11:04 ` [PATCH 04/24] acornscsi: use standard defines Hannes Reinecke
2019-11-01 16:18 ` Bart Van Assche
2019-11-01 16:40 ` Hannes Reinecke
2019-10-31 11:04 ` [PATCH 05/24] scsi: use standard SAM status codes Hannes Reinecke
2019-11-01 16:26 ` Bart Van Assche
2019-11-01 16:54 ` Hannes Reinecke
2019-11-01 18:10 ` Bart Van Assche
2019-10-31 11:04 ` [PATCH 06/24] scsi: change status_byte() to return the standard SCSI status Hannes Reinecke
2019-10-31 11:04 ` [PATCH 07/24] target_core: Fixup target_complete_cmd() usage Hannes Reinecke
2019-11-01 16:29 ` Bart Van Assche
2019-10-31 11:04 ` [PATCH 08/24] sg: use SAM status definitions and avoid using masked_status Hannes Reinecke
2019-10-31 11:04 ` [PATCH 09/24] scsi: Kill obsolete linux-specific status codes Hannes Reinecke
2019-11-02 13:14 ` kbuild test robot
2019-10-31 11:04 ` [PATCH 10/24] scsi: introduce set_status_byte() Hannes Reinecke
2019-11-01 16:36 ` Bart Van Assche
2019-10-31 11:04 ` [PATCH 11/24] advansys: kill driver_defined status byte accessors Hannes Reinecke
2019-10-31 11:04 ` [PATCH 12/24] scsi: introduce scsi_build_sense() Hannes Reinecke
2019-11-01 16:35 ` Bart Van Assche
2019-10-31 11:04 ` [PATCH 13/24] scsi: Kill DRIVER_SENSE Hannes Reinecke
2019-10-31 11:04 ` [PATCH 14/24] scsi: Kill DRIVER_HARD Hannes Reinecke
2019-10-31 11:04 ` [PATCH 15/24] scsi_error: use DID_TIME_OUT instead of DRIVER_TIMEOUT Hannes Reinecke
2019-10-31 11:04 ` [PATCH 16/24] scsi: Kill DRIVER_TIMEOUT Hannes Reinecke
2019-10-31 11:04 ` [PATCH 17/24] scsi: do not use DRIVER_INVALID Hannes Reinecke
2019-11-02 3:28 ` Finn Thain
2019-10-31 11:04 ` [PATCH 18/24] st: return error code in st_scsi_execute() Hannes Reinecke
2019-10-31 11:04 ` [PATCH 19/24] scsi_ioctl: return error code when blk_rq_map_kern() fails Hannes Reinecke
2019-10-31 11:04 ` [PATCH 20/24] scsi_dh_alua: do not interpret DRIVER_ERROR Hannes Reinecke
2019-10-31 11:04 ` [PATCH 21/24] xen-scsiback: stop using DRIVER_ERROR Hannes Reinecke
2019-10-31 11:04 ` [PATCH 22/24] scsi: " Hannes Reinecke
2019-10-31 11:04 ` [PATCH 23/24] scsi: Kill DRIVER_MEDIA, DRIVER_SOFT, and DRIVER_BUSY Hannes Reinecke
2019-10-31 11:04 ` [PATCH 24/24] scsi: Drop the now obsolete driver_byte definitions Hannes Reinecke
-- strict thread matches above, loose matches on Subject: below --
2019-10-21 9:52 [PATCH RFC 00/24] scsi: Revamp result values Hannes Reinecke
2019-10-21 9:53 ` [PATCH 02/24] bfa: drop driver-defined SCSI status codes Hannes Reinecke
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191031110452.73463-3-hare@suse.de \
--to=hare@suse.de \
--cc=hch@lst.de \
--cc=james.bottomley@hansenpartnership.com \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).