Linux-SCSI Archive on lore.kernel.org
 help / color / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Finn Thain <fthain@telegraphics.com.au>,
	Michael Schmitz <schmitzmic@gmail.com>,
	"Martin K . Petersen" <martin.petersen@oracle.com>,
	Sasha Levin <sashal@kernel.org>,
	linux-scsi@vger.kernel.org
Subject: [PATCH AUTOSEL 4.19 173/191] scsi: NCR5380: Don't clear busy flag when abort fails
Date: Sat,  9 Nov 2019 21:39:55 -0500
Message-ID: <20191110024013.29782-173-sashal@kernel.org> (raw)
In-Reply-To: <20191110024013.29782-1-sashal@kernel.org>

From: Finn Thain <fthain@telegraphics.com.au>

[ Upstream commit 45ddc1b24806cc8f1a09f23dd4e7b6e4a8ae36e1 ]

When NCR5380_abort() returns FAILED, the driver forgets that the target is
still busy. Hence, further commands may be sent to the target, which may fail
during selection and produce the error message, "reselection after won
arbitration?". Prevent this by leaving the busy flag set when NCR5380_abort()
fails.

Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/NCR5380.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
index c67f476447372..227ceb5197555 100644
--- a/drivers/scsi/NCR5380.c
+++ b/drivers/scsi/NCR5380.c
@@ -522,8 +522,6 @@ static void complete_cmd(struct Scsi_Host *instance,
 		hostdata->sensing = NULL;
 	}
 
-	hostdata->busy[scmd_id(cmd)] &= ~(1 << cmd->device->lun);
-
 	cmd->scsi_done(cmd);
 }
 
@@ -1711,6 +1709,7 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
 				cmd->result = DID_ERROR << 16;
 				complete_cmd(instance, cmd);
 				hostdata->connected = NULL;
+				hostdata->busy[scmd_id(cmd)] &= ~(1 << cmd->device->lun);
 				return;
 #endif
 			case PHASE_DATAIN:
@@ -1793,6 +1792,7 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
 					         cmd, scmd_id(cmd), cmd->device->lun);
 
 					hostdata->connected = NULL;
+					hostdata->busy[scmd_id(cmd)] &= ~(1 << cmd->device->lun);
 
 					cmd->result &= ~0xffff;
 					cmd->result |= cmd->SCp.Status;
@@ -1946,6 +1946,7 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
 				NCR5380_transfer_pio(instance, &phase, &len, &data);
 				if (msgout == ABORT) {
 					hostdata->connected = NULL;
+					hostdata->busy[scmd_id(cmd)] &= ~(1 << cmd->device->lun);
 					cmd->result = DID_ERROR << 16;
 					complete_cmd(instance, cmd);
 					maybe_release_dma_irq(instance);
@@ -2100,13 +2101,16 @@ static void NCR5380_reselect(struct Scsi_Host *instance)
 		dsprintk(NDEBUG_RESELECTION | NDEBUG_QUEUES, instance,
 		         "reselect: removed %p from disconnected queue\n", tmp);
 	} else {
+		int target = ffs(target_mask) - 1;
+
 		shost_printk(KERN_ERR, instance, "target bitmask 0x%02x lun %d not in disconnected queue.\n",
 		             target_mask, lun);
 		/*
 		 * Since we have an established nexus that we can't do anything
 		 * with, we must abort it.
 		 */
-		do_abort(instance);
+		if (do_abort(instance) == 0)
+			hostdata->busy[target] &= ~(1 << lun);
 		return;
 	}
 
@@ -2277,8 +2281,10 @@ static int NCR5380_abort(struct scsi_cmnd *cmd)
 out:
 	if (result == FAILED)
 		dsprintk(NDEBUG_ABORT, instance, "abort: failed to abort %p\n", cmd);
-	else
+	else {
+		hostdata->busy[scmd_id(cmd)] &= ~(1 << cmd->device->lun);
 		dsprintk(NDEBUG_ABORT, instance, "abort: successfully aborted %p\n", cmd);
+	}
 
 	queue_work(hostdata->work_q, &hostdata->main_task);
 	maybe_release_dma_irq(instance);
-- 
2.20.1


  parent reply index

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20191110024013.29782-1-sashal@kernel.org>
2019-11-10  2:39 ` [PATCH AUTOSEL 4.19 127/191] scsi: libsas: always unregister the old device if going to discover new Sasha Levin
2019-11-10  2:39 ` [PATCH AUTOSEL 4.19 168/191] scsi: NCR5380: Clear all unissued commands on host reset Sasha Levin
2019-11-10  2:39 ` [PATCH AUTOSEL 4.19 169/191] scsi: NCR5380: Have NCR5380_select() return a bool Sasha Levin
2019-11-10  2:39 ` [PATCH AUTOSEL 4.19 170/191] scsi: NCR5380: Withhold disconnect privilege for REQUEST SENSE Sasha Levin
2019-11-10  2:39 ` [PATCH AUTOSEL 4.19 171/191] scsi: NCR5380: Use DRIVER_SENSE to indicate valid sense data Sasha Levin
2019-11-10  2:39 ` [PATCH AUTOSEL 4.19 172/191] scsi: NCR5380: Check for invalid reselection target Sasha Levin
2019-11-10  2:39 ` Sasha Levin [this message]
2019-11-10  2:39 ` [PATCH AUTOSEL 4.19 174/191] scsi: NCR5380: Don't call dsprintk() following reselection interrupt Sasha Levin
2019-11-10  2:39 ` [PATCH AUTOSEL 4.19 175/191] scsi: NCR5380: Handle BUS FREE during reselection Sasha Levin
2019-11-10  2:39 ` [PATCH AUTOSEL 4.19 176/191] scsi: NCR5380: Check for bus reset Sasha Levin

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191110024013.29782-173-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=fthain@telegraphics.com.au \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    --cc=schmitzmic@gmail.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-SCSI Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-scsi/0 linux-scsi/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-scsi linux-scsi/ https://lore.kernel.org/linux-scsi \
		linux-scsi@vger.kernel.org
	public-inbox-index linux-scsi

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-scsi


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git