[PATCH 1/2] scsi: vmw_pvscsi: Fix swiotlb operation

[PATCH 1/2] scsi: vmw_pvscsi: Fix swiotlb operation

[Thomas Hellström (VMware)]

From: Thomas Hellstrom <thellstrom@vmware.com>

With swiotlb, the first byte of the sense buffer may in some cases be
uninitialized since we use DMA_FROM_DEVICE, and the device incorrectly
doesn't clear it. In those cases, clear it after DMA unmapping.

Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Suggested-by: Vishal Bhakta <vbhakta@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Acked-by: Jim Gill <jgill@vmware.com>

 Please enter the commit message for your changes. Lines starting
---
 drivers/scsi/vmw_pvscsi.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/scsi/vmw_pvscsi.c b/drivers/scsi/vmw_pvscsi.c
index 70008816c91f..8a09d184a320 100644
--- a/drivers/scsi/vmw_pvscsi.c
+++ b/drivers/scsi/vmw_pvscsi.c
@@ -402,6 +402,17 @@ static int pvscsi_map_buffers(struct pvscsi_adapter *adapter,
 	return 0;
 }
 
+/*
+ * The device incorrectly doesn't clear the first byte of the sense
+ * buffer in some cases. We have to do it ourselves.
+ * Otherwise we run into trouble when SWIOTLB is forced.
+ */
+static void pvscsi_patch_sense(struct scsi_cmnd *cmd)
+{
+	if (cmd->sense_buffer)
+		cmd->sense_buffer[0] = 0;
+}
+
 static void pvscsi_unmap_buffers(const struct pvscsi_adapter *adapter,
 				 struct pvscsi_ctx *ctx)
 {
@@ -544,6 +555,8 @@ static void pvscsi_complete_request(struct pvscsi_adapter *adapter,
 	cmd = ctx->cmd;
 	abort_cmp = ctx->abort_cmp;
 	pvscsi_unmap_buffers(adapter, ctx);
+	if (sdstat != SAM_STAT_CHECK_CONDITION)
+		pvscsi_patch_sense(cmd);
 	pvscsi_release_context(adapter, ctx);
 	if (abort_cmp) {
 		/*
@@ -873,6 +886,7 @@ static void pvscsi_reset_all(struct pvscsi_adapter *adapter)
 			scmd_printk(KERN_ERR, cmd,
 				    "Forced reset on cmd %p\n", cmd);
 			pvscsi_unmap_buffers(adapter, ctx);
+			pvscsi_patch_sense(cmd);
 			pvscsi_release_context(adapter, ctx);
 			cmd->result = (DID_RESET << 16);
 			cmd->scsi_done(cmd);
-- 
2.21.0

[PATCH 2/2] scsi: vmw_pvscsi: Silence dma mapping errors

[Thomas Hellström (VMware)]

From: Thomas Hellstrom <thellstrom@vmware.com>

These errors typically occur with swiotlb when the swiotlb buffer is full.
But they are transient and would typically unnecessarily worry a user.
Instead of errors, print debug messages.

Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Acked-by: Jim Gill <jgill@vmware.com>
---
 drivers/scsi/vmw_pvscsi.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/vmw_pvscsi.c b/drivers/scsi/vmw_pvscsi.c
index 8a09d184a320..c3f010df641e 100644
--- a/drivers/scsi/vmw_pvscsi.c
+++ b/drivers/scsi/vmw_pvscsi.c
@@ -365,7 +365,7 @@ static int pvscsi_map_buffers(struct pvscsi_adapter *adapter,
 		int segs = scsi_dma_map(cmd);
 
 		if (segs == -ENOMEM) {
-			scmd_printk(KERN_ERR, cmd,
+			scmd_printk(KERN_DEBUG, cmd,
 				    "vmw_pvscsi: Failed to map cmd sglist for DMA.\n");
 			return -ENOMEM;
 		} else if (segs > 1) {
@@ -392,7 +392,7 @@ static int pvscsi_map_buffers(struct pvscsi_adapter *adapter,
 		ctx->dataPA = dma_map_single(&adapter->dev->dev, sg, bufflen,
 					     cmd->sc_data_direction);
 		if (dma_mapping_error(&adapter->dev->dev, ctx->dataPA)) {
-			scmd_printk(KERN_ERR, cmd,
+			scmd_printk(KERN_DEBUG, cmd,
 				    "vmw_pvscsi: Failed to map direct data buffer for DMA.\n");
 			return -ENOMEM;
 		}
@@ -725,7 +725,7 @@ static int pvscsi_queue_ring(struct pvscsi_adapter *adapter,
 				cmd->sense_buffer, SCSI_SENSE_BUFFERSIZE,
 				DMA_FROM_DEVICE);
 		if (dma_mapping_error(&adapter->dev->dev, ctx->sensePA)) {
-			scmd_printk(KERN_ERR, cmd,
+			scmd_printk(KERN_DEBUG, cmd,
 				    "vmw_pvscsi: Failed to map sense buffer for DMA.\n");
 			ctx->sensePA = 0;
 			return -ENOMEM;
-- 
2.21.0