[PATCH AUTOSEL 4.14 001/127] scsi: lpfc: Fix kernel Oops due to null pring pointers

[PATCH AUTOSEL 4.14 001/127] scsi: lpfc: Fix kernel Oops due to null pring pointers

[Sasha Levin]

From: James Smart <jsmart2021@gmail.com>

[ Upstream commit 5a9eeff57f340238c39c95d8e7e54c96fc722de7 ]

Driver is hitting null pring pointers in lpfc_do_work().

Pointer assignment occurs based on SLI-revision. If recovering after an
error, its possible the sli revision for the port was cleared, making the
lpfc_phba_elsring() not return a ring pointer, thus the null pointer.

Add SLI revision checking to lpfc_phba_elsring() and status checking to all
callers.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc.h      | 6 ++++++
 drivers/scsi/lpfc/lpfc_els.c  | 2 ++
 drivers/scsi/lpfc/lpfc_init.c | 7 ++++++-
 drivers/scsi/lpfc/lpfc_sli.c  | 2 ++
 4 files changed, 16 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index bc61cc8bc6f02..03e95a3216c8c 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -1239,6 +1239,12 @@ lpfc_sli_read_hs(struct lpfc_hba *phba)
 static inline struct lpfc_sli_ring *
 lpfc_phba_elsring(struct lpfc_hba *phba)
 {
+	/* Return NULL if sli_rev has become invalid due to bad fw */
+	if (phba->sli_rev != LPFC_SLI_REV4  &&
+	    phba->sli_rev != LPFC_SLI_REV3  &&
+	    phba->sli_rev != LPFC_SLI_REV2)
+		return NULL;
+
 	if (phba->sli_rev == LPFC_SLI_REV4) {
 		if (phba->sli4_hba.els_wq)
 			return phba->sli4_hba.els_wq->pring;
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index ddd29752d96dc..0032465d1b630 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -1335,6 +1335,8 @@ lpfc_els_abort_flogi(struct lpfc_hba *phba)
 			Fabric_DID);
 
 	pring = lpfc_phba_elsring(phba);
+	if (unlikely(!pring))
+		return -EIO;
 
 	/*
 	 * Check the txcmplq for an iocb that matches the nport the driver is
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 25612ccf6ff28..1da125afebddb 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -1773,7 +1773,12 @@ lpfc_sli4_port_sta_fn_reset(struct lpfc_hba *phba, int mbx_action,
 	lpfc_offline(phba);
 	/* release interrupt for possible resource change */
 	lpfc_sli4_disable_intr(phba);
-	lpfc_sli_brdrestart(phba);
+	rc = lpfc_sli_brdrestart(phba);
+	if (rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"6309 Failed to restart board\n");
+		return rc;
+	}
 	/* request and enable interrupt */
 	intr_mode = lpfc_sli4_enable_intr(phba, phba->intr_mode);
 	if (intr_mode == LPFC_INTR_ERROR) {
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 6c2b098b76095..0128ea32b208f 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -4421,6 +4421,8 @@ lpfc_sli_brdrestart_s4(struct lpfc_hba *phba)
 	hba_aer_enabled = phba->hba_flag & HBA_AER_ENABLED;
 
 	rc = lpfc_sli4_brdreset(phba);
+	if (rc)
+		return rc;
 
 	spin_lock_irq(&phba->hbalock);
 	phba->pport->stopped = 0;
-- 
2.20.1

[PATCH AUTOSEL 4.14 002/127] scsi: lpfc: Fix dif and first burst use in write commands

[Sasha Levin]

From: James Smart <jsmart2021@gmail.com>

[ Upstream commit 7c4042a4d0b7532cfbc90478fd3084b2dab5849e ]

When dif and first burst is used in a write command wqe, the driver was not
properly setting fields in the io command request. This resulted in no dif
bytes being sent and invalid xfer_rdy's, resulting in the io being aborted
by the hardware.

Correct the wqe initializaton when both dif and first burst are used.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc_scsi.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 07cb671bb8550..2eba0c39ac1c4 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -2714,6 +2714,7 @@ lpfc_bg_scsi_prep_dma_buf_s3(struct lpfc_hba *phba,
 	int datasegcnt, protsegcnt, datadir = scsi_cmnd->sc_data_direction;
 	int prot_group_type = 0;
 	int fcpdl;
+	struct lpfc_vport *vport = phba->pport;
 
 	/*
 	 * Start the lpfc command prep by bumping the bpl beyond fcp_cmnd
@@ -2819,6 +2820,14 @@ lpfc_bg_scsi_prep_dma_buf_s3(struct lpfc_hba *phba,
 	 */
 	iocb_cmd->un.fcpi.fcpi_parm = fcpdl;
 
+	/*
+	 * For First burst, we may need to adjust the initial transfer
+	 * length for DIF
+	 */
+	if (iocb_cmd->un.fcpi.fcpi_XRdy &&
+	    (fcpdl < vport->cfg_first_burst_size))
+		iocb_cmd->un.fcpi.fcpi_XRdy = fcpdl;
+
 	return 0;
 err:
 	if (lpfc_cmd->seg_cnt)
@@ -3371,6 +3380,7 @@ lpfc_bg_scsi_prep_dma_buf_s4(struct lpfc_hba *phba,
 	int datasegcnt, protsegcnt, datadir = scsi_cmnd->sc_data_direction;
 	int prot_group_type = 0;
 	int fcpdl;
+	struct lpfc_vport *vport = phba->pport;
 
 	/*
 	 * Start the lpfc command prep by bumping the sgl beyond fcp_cmnd
@@ -3486,6 +3496,14 @@ lpfc_bg_scsi_prep_dma_buf_s4(struct lpfc_hba *phba,
 	 */
 	iocb_cmd->un.fcpi.fcpi_parm = fcpdl;
 
+	/*
+	 * For First burst, we may need to adjust the initial transfer
+	 * length for DIF
+	 */
+	if (iocb_cmd->un.fcpi.fcpi_XRdy &&
+	    (fcpdl < vport->cfg_first_burst_size))
+		iocb_cmd->un.fcpi.fcpi_XRdy = fcpdl;
+
 	/*
 	 * If the OAS driver feature is enabled and the lun is enabled for
 	 * OAS, set the oas iocb related flags.
-- 
2.20.1

[PATCH AUTOSEL 4.14 015/127] scsi: lpfc: Enable Management features for IF_TYPE=6

[Sasha Levin]

From: James Smart <jsmart2021@gmail.com>

[ Upstream commit 719162bd5bb968203397b9b1d0dd30a9797bbd09 ]

Addition of support for if_type=6 missed several checks for interface type,
resulting in the failure of several key management features such as
firmware dump and loopback testing.

Correct the checks on the if_type so that both SLI4 IF_TYPE's 2 and 6 are
supported.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc_attr.c    | 4 ++--
 drivers/scsi/lpfc/lpfc_bsg.c     | 6 +++---
 drivers/scsi/lpfc/lpfc_els.c     | 2 +-
 drivers/scsi/lpfc/lpfc_hbadisc.c | 2 +-
 4 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 3da242201cb45..82ce5d1930189 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -1178,7 +1178,7 @@ lpfc_sli4_pdev_reg_request(struct lpfc_hba *phba, uint32_t opcode)
 		return -EACCES;
 
 	if ((phba->sli_rev < LPFC_SLI_REV4) ||
-	    (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) !=
+	    (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) <
 	     LPFC_SLI_INTF_IF_TYPE_2))
 		return -EPERM;
 
@@ -4056,7 +4056,7 @@ lpfc_link_speed_store(struct device *dev, struct device_attribute *attr,
 	uint32_t prev_val, if_type;
 
 	if_type = bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf);
-	if (if_type == LPFC_SLI_INTF_IF_TYPE_2 &&
+	if (if_type >= LPFC_SLI_INTF_IF_TYPE_2 &&
 	    phba->hba_flag & HBA_FORCED_LINK_SPEED)
 		return -EPERM;
 
diff --git a/drivers/scsi/lpfc/lpfc_bsg.c b/drivers/scsi/lpfc/lpfc_bsg.c
index d89816222b230..6dde21dc82a3c 100644
--- a/drivers/scsi/lpfc/lpfc_bsg.c
+++ b/drivers/scsi/lpfc/lpfc_bsg.c
@@ -2221,7 +2221,7 @@ lpfc_bsg_diag_loopback_mode(struct bsg_job *job)
 
 	if (phba->sli_rev < LPFC_SLI_REV4)
 		rc = lpfc_sli3_bsg_diag_loopback_mode(phba, job);
-	else if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) ==
+	else if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) >=
 		 LPFC_SLI_INTF_IF_TYPE_2)
 		rc = lpfc_sli4_bsg_diag_loopback_mode(phba, job);
 	else
@@ -2261,7 +2261,7 @@ lpfc_sli4_bsg_diag_mode_end(struct bsg_job *job)
 
 	if (phba->sli_rev < LPFC_SLI_REV4)
 		return -ENODEV;
-	if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) !=
+	if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) <
 	    LPFC_SLI_INTF_IF_TYPE_2)
 		return -ENODEV;
 
@@ -2353,7 +2353,7 @@ lpfc_sli4_bsg_link_diag_test(struct bsg_job *job)
 		rc = -ENODEV;
 		goto job_error;
 	}
-	if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) !=
+	if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) <
 	    LPFC_SLI_INTF_IF_TYPE_2) {
 		rc = -ENODEV;
 		goto job_error;
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 0032465d1b630..63c1a81005e52 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -5528,7 +5528,7 @@ lpfc_els_rcv_rdp(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
 	struct ls_rjt stat;
 
 	if (phba->sli_rev < LPFC_SLI_REV4 ||
-	    bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) !=
+	    bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) <
 						LPFC_SLI_INTF_IF_TYPE_2) {
 		rjt_err = LSRJT_UNABLE_TPC;
 		rjt_expl = LSEXP_REQ_UNSUPPORTED;
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index b970933a218d5..424e870676046 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -4749,7 +4749,7 @@ lpfc_unreg_rpi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
 				if (phba->sli_rev == LPFC_SLI_REV4 &&
 				    (!(vport->load_flag & FC_UNLOADING)) &&
 				    (bf_get(lpfc_sli_intf_if_type,
-				     &phba->sli4_hba.sli_intf) ==
+				     &phba->sli4_hba.sli_intf) >=
 				      LPFC_SLI_INTF_IF_TYPE_2) &&
 				    (kref_read(&ndlp->kref) > 0)) {
 					mbox->context1 = lpfc_nlp_get(ndlp);
-- 
2.20.1

[PATCH AUTOSEL 4.14 060/127] scsi: qla2xxx: deadlock by configfs_depend_item

[Sasha Levin]

From: Anatoliy Glagolev <glagolig@gmail.com>

[ Upstream commit 17b18eaa6f59044a5172db7d07149e31ede0f920 ]

The intent of invoking configfs_depend_item in commit 7474f52a82d51
("tcm_qla2xxx: Perform configfs depend/undepend for base_tpg")
was to prevent a physical Fibre Channel port removal when
virtual (NPIV) ports announced through that physical port are active.
The change does not work as expected: it makes enabled physical port
dependent on target configfs subsystem (the port's parent), something
the configfs guarantees anyway.

Besides, scheduling work in a worker thread and waiting for the work's
completion is not really a valid workaround for the requirement not to call
configfs_depend_item from a configfs callback: the call occasionally
deadlocks.

Thus, removing configfs_depend_item calls does not break anything and fixes
the deadlock problem.

Signed-off-by: Anatoliy Glagolev <glagolig@gmail.com>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/tcm_qla2xxx.c | 48 +++++-------------------------
 drivers/scsi/qla2xxx/tcm_qla2xxx.h |  3 --
 2 files changed, 8 insertions(+), 43 deletions(-)

diff --git a/drivers/scsi/qla2xxx/tcm_qla2xxx.c b/drivers/scsi/qla2xxx/tcm_qla2xxx.c
index 2fcdaadd10fa5..e08ac431bc496 100644
--- a/drivers/scsi/qla2xxx/tcm_qla2xxx.c
+++ b/drivers/scsi/qla2xxx/tcm_qla2xxx.c
@@ -903,38 +903,14 @@ static ssize_t tcm_qla2xxx_tpg_enable_show(struct config_item *item,
 			atomic_read(&tpg->lport_tpg_enabled));
 }
 
-static void tcm_qla2xxx_depend_tpg(struct work_struct *work)
-{
-	struct tcm_qla2xxx_tpg *base_tpg = container_of(work,
-				struct tcm_qla2xxx_tpg, tpg_base_work);
-	struct se_portal_group *se_tpg = &base_tpg->se_tpg;
-	struct scsi_qla_host *base_vha = base_tpg->lport->qla_vha;
-
-	if (!target_depend_item(&se_tpg->tpg_group.cg_item)) {
-		atomic_set(&base_tpg->lport_tpg_enabled, 1);
-		qlt_enable_vha(base_vha);
-	}
-	complete(&base_tpg->tpg_base_comp);
-}
-
-static void tcm_qla2xxx_undepend_tpg(struct work_struct *work)
-{
-	struct tcm_qla2xxx_tpg *base_tpg = container_of(work,
-				struct tcm_qla2xxx_tpg, tpg_base_work);
-	struct se_portal_group *se_tpg = &base_tpg->se_tpg;
-	struct scsi_qla_host *base_vha = base_tpg->lport->qla_vha;
-
-	if (!qlt_stop_phase1(base_vha->vha_tgt.qla_tgt)) {
-		atomic_set(&base_tpg->lport_tpg_enabled, 0);
-		target_undepend_item(&se_tpg->tpg_group.cg_item);
-	}
-	complete(&base_tpg->tpg_base_comp);
-}
-
 static ssize_t tcm_qla2xxx_tpg_enable_store(struct config_item *item,
 		const char *page, size_t count)
 {
 	struct se_portal_group *se_tpg = to_tpg(item);
+	struct se_wwn *se_wwn = se_tpg->se_tpg_wwn;
+	struct tcm_qla2xxx_lport *lport = container_of(se_wwn,
+			struct tcm_qla2xxx_lport, lport_wwn);
+	struct scsi_qla_host *vha = lport->qla_vha;
 	struct tcm_qla2xxx_tpg *tpg = container_of(se_tpg,
 			struct tcm_qla2xxx_tpg, se_tpg);
 	unsigned long op;
@@ -953,24 +929,16 @@ static ssize_t tcm_qla2xxx_tpg_enable_store(struct config_item *item,
 		if (atomic_read(&tpg->lport_tpg_enabled))
 			return -EEXIST;
 
-		INIT_WORK(&tpg->tpg_base_work, tcm_qla2xxx_depend_tpg);
+		atomic_set(&tpg->lport_tpg_enabled, 1);
+		qlt_enable_vha(vha);
 	} else {
 		if (!atomic_read(&tpg->lport_tpg_enabled))
 			return count;
 
-		INIT_WORK(&tpg->tpg_base_work, tcm_qla2xxx_undepend_tpg);
+		atomic_set(&tpg->lport_tpg_enabled, 0);
+		qlt_stop_phase1(vha->vha_tgt.qla_tgt);
 	}
-	init_completion(&tpg->tpg_base_comp);
-	schedule_work(&tpg->tpg_base_work);
-	wait_for_completion(&tpg->tpg_base_comp);
 
-	if (op) {
-		if (!atomic_read(&tpg->lport_tpg_enabled))
-			return -ENODEV;
-	} else {
-		if (atomic_read(&tpg->lport_tpg_enabled))
-			return -EPERM;
-	}
 	return count;
 }
 
diff --git a/drivers/scsi/qla2xxx/tcm_qla2xxx.h b/drivers/scsi/qla2xxx/tcm_qla2xxx.h
index 7550ba2831c36..147cf6c903666 100644
--- a/drivers/scsi/qla2xxx/tcm_qla2xxx.h
+++ b/drivers/scsi/qla2xxx/tcm_qla2xxx.h
@@ -48,9 +48,6 @@ struct tcm_qla2xxx_tpg {
 	struct tcm_qla2xxx_tpg_attrib tpg_attrib;
 	/* Returned by tcm_qla2xxx_make_tpg() */
 	struct se_portal_group se_tpg;
-	/* Items for dealing with configfs_depend_item */
-	struct completion tpg_base_comp;
-	struct work_struct tpg_base_work;
 };
 
 struct tcm_qla2xxx_fc_loopid {
-- 
2.20.1

[PATCH AUTOSEL 4.14 061/127] scsi: csiostor: fix incorrect dma device in case of vport

[Sasha Levin]

From: Varun Prakash <varun@chelsio.com>

[ Upstream commit 9934613edcb40b92a216122876cd3b7e76d08390 ]

In case of ->vport_create() call scsi_add_host_with_dma() instead of
scsi_add_host() to pass correct dma device.

Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/csiostor/csio_init.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/csiostor/csio_init.c b/drivers/scsi/csiostor/csio_init.c
index 28a9c7d706cb0..03c7b1603dbc1 100644
--- a/drivers/scsi/csiostor/csio_init.c
+++ b/drivers/scsi/csiostor/csio_init.c
@@ -649,7 +649,7 @@ csio_shost_init(struct csio_hw *hw, struct device *dev,
 	if (csio_lnode_init(ln, hw, pln))
 		goto err_shost_put;
 
-	if (scsi_add_host(shost, dev))
+	if (scsi_add_host_with_dma(shost, dev, &hw->pdev->dev))
 		goto err_lnode_exit;
 
 	return ln;
-- 
2.20.1

[PATCH AUTOSEL 4.14 121/127] scsi: libsas: Support SATA PHY connection rate unmatch fixing during discovery

[Sasha Levin]

From: John Garry <john.garry@huawei.com>

[ Upstream commit cec9771d2e954650095aa37a6a97722c8194e7d2 ]

   +----------+             +----------+
   |          |             |          |
   |          |--- 3.0 G ---|          |--- 6.0 G --- SAS  disk
   |          |             |          |
   |          |--- 3.0 G ---|          |--- 6.0 G --- SAS  disk
   |initiator |             |          |
   | device   |--- 3.0 G ---| Expander |--- 6.0 G --- SAS  disk
   |          |             |          |
   |          |--- 3.0 G ---|          |--- 6.0 G --- SATA disk  -->failed to connect
   |          |             |          |
   |          |             |          |--- 6.0 G --- SATA disk  -->failed to connect
   |          |             |          |
   +----------+             +----------+

According to Serial Attached SCSI - 1.1 (SAS-1.1):
If an expander PHY attached to a SATA PHY is using a physical link rate
greater than the maximum connection rate supported by the pathway from an
STP initiator port, a management application client should use the SMP PHY
CONTROL function (see 10.4.3.10) to set the PROGRAMMED MAXIMUM PHYSICAL
LINK RATE field of the expander PHY to the maximum connection rate
supported by the pathway from that STP initiator port.

Currently libsas does not support checking if this condition occurs, nor
rectifying when it does.

Such a condition is not at all common, however it has been seen on some
pre-silicon environments where the initiator PHY only supports a 1.5 Gbit
maximum linkrate, mated with 12G expander PHYs and 3/6G SATA phy.

This patch adds support for checking and rectifying this condition during
initial device discovery only.

We do support checking min pathway connection rate during revalidation phase,
when new devices can be detected in the topology. However we do not
support in the case of the the user reprogramming PHY linkrates, such that
min pathway condition is not met/maintained.

A note on root port PHY rates:
The libsas root port PHY rates calculation is broken. Libsas sets the
rates (min, max, and current linkrate) of a root port to the same linkrate
of the first PHY member of that same port. In doing so, it assumes that
all other PHYs which subsequently join the port to have the same
negotiated linkrate, when they could actually be different.

In practice this doesn't happen, as initiator and expander PHYs are
normally initialised with consistent min/max linkrates.

This has not caused an issue so far, so leave alone for now.

Tested-by: Jian Luo <luojian5@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/libsas/sas_expander.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index 259ee0d3c3e61..819a655473588 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -817,6 +817,26 @@ static struct domain_device *sas_ex_discover_end_dev(
 
 #ifdef CONFIG_SCSI_SAS_ATA
 	if ((phy->attached_tproto & SAS_PROTOCOL_STP) || phy->attached_sata_dev) {
+		if (child->linkrate > parent->min_linkrate) {
+			struct sas_phy_linkrates rates = {
+				.maximum_linkrate = parent->min_linkrate,
+				.minimum_linkrate = parent->min_linkrate,
+			};
+			int ret;
+
+			pr_notice("ex %016llx phy%02d SATA device linkrate > min pathway connection rate, attempting to lower device linkrate\n",
+				   SAS_ADDR(child->sas_addr), phy_id);
+			ret = sas_smp_phy_control(parent, phy_id,
+						  PHY_FUNC_LINK_RESET, &rates);
+			if (ret) {
+				pr_err("ex %016llx phy%02d SATA device could not set linkrate (%d)\n",
+				       SAS_ADDR(child->sas_addr), phy_id, ret);
+				goto out_free;
+			}
+			pr_notice("ex %016llx phy%02d SATA device set linkrate successfully\n",
+				  SAS_ADDR(child->sas_addr), phy_id);
+			child->linkrate = child->min_linkrate;
+		}
 		res = sas_get_ata_info(child, phy);
 		if (res)
 			goto out_free;
-- 
2.20.1

[PATCH AUTOSEL 4.14 124/127] scsi: libsas: Check SMP PHY control function result

[Sasha Levin]

From: John Garry <john.garry@huawei.com>

[ Upstream commit 01929a65dfa13e18d89264ab1378854a91857e59 ]

Currently the SMP PHY control execution result is checked, however the
function result for the command is not.

As such, we may be missing all potential errors, like SMP FUNCTION FAILED,
INVALID REQUEST FRAME LENGTH, etc., meaning the PHY control request has
failed.

In some scenarios we need to ensure the function result is accepted, so add
a check for this.

Tested-by: Jian Luo <luojian5@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/libsas/sas_expander.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index 819a655473588..0901ce3c33899 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -614,7 +614,14 @@ int sas_smp_phy_control(struct domain_device *dev, int phy_id,
 	}
 
 	res = smp_execute_task(dev, pc_req, PC_REQ_SIZE, pc_resp,PC_RESP_SIZE);
-
+	if (res) {
+		pr_err("ex %016llx phy%02d PHY control failed: %d\n",
+		       SAS_ADDR(dev->sas_addr), phy_id, res);
+	} else if (pc_resp[2] != SMP_RESP_FUNC_ACC) {
+		pr_err("ex %016llx phy%02d PHY control failed: function result 0x%x\n",
+		       SAS_ADDR(dev->sas_addr), phy_id, pc_resp[2]);
+		res = pc_resp[2];
+	}
 	kfree(pc_resp);
 	kfree(pc_req);
 	return res;
-- 
2.20.1