[PATCH AUTOSEL 4.9 01/42] scsi: mpt3sas: Fix clear pending bit in ioctl status

[PATCH AUTOSEL 4.9 01/42] scsi: mpt3sas: Fix clear pending bit in ioctl status

[Sasha Levin]

From: Sreekanth Reddy <sreekanth.reddy@broadcom.com>

[ Upstream commit 782b281883caf70289ba6a186af29441a117d23e ]

When user issues diag register command from application with required size,
and if driver unable to allocate the memory, then it will fail the register
command. While failing the register command, driver is not currently
clearing MPT3_CMD_PENDING bit in ctl_cmds.status variable which was set
before trying to allocate the memory. As this bit is set, subsequent
register command will be failed with BUSY status even when user wants to
register the trace buffer will less memory.

Clear MPT3_CMD_PENDING bit in ctl_cmds.status before returning the diag
register command with no memory status.

Link: https://lore.kernel.org/r/1568379890-18347-4-git-send-email-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/mpt3sas/mpt3sas_ctl.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.c b/drivers/scsi/mpt3sas/mpt3sas_ctl.c
index 26cdc127ac89c..90a87e59ff602 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_ctl.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.c
@@ -1465,7 +1465,8 @@ _ctl_diag_register_2(struct MPT3SAS_ADAPTER *ioc,
 			    " for diag buffers, requested size(%d)\n",
 			    ioc->name, __func__, request_data_sz);
 			mpt3sas_base_free_smid(ioc, smid);
-			return -ENOMEM;
+			rc = -ENOMEM;
+			goto out;
 		}
 		ioc->diag_buffer[buffer_type] = request_data;
 		ioc->diag_buffer_sz[buffer_type] = request_data_sz;
-- 
2.20.1

[PATCH AUTOSEL 4.9 02/42] scsi: lpfc: Fix locking on mailbox command completion

[Sasha Levin]

From: James Smart <jsmart2021@gmail.com>

[ Upstream commit 07b8582430370097238b589f4e24da7613ca6dd3 ]

Symptoms were seen of the driver not having valid data for mailbox
commands. After debugging, the following sequence was found:

The driver maintains a port-wide pointer of the mailbox command that is
currently in execution. Once finished, the port-wide pointer is cleared
(done in lpfc_sli4_mq_release()). The next mailbox command issued will set
the next pointer and so on.

The mailbox response data is only copied if there is a valid port-wide
pointer.

In the failing case, it was seen that a new mailbox command was being
attempted in parallel with the completion.  The parallel path was seeing
the mailbox no long in use (flag check under lock) and thus set the port
pointer.  The completion path had cleared the active flag under lock, but
had not touched the port pointer.  The port pointer is cleared after the
lock is released. In this case, the completion path cleared the just-set
value by the parallel path.

Fix by making the calls that clear mbox state/port pointer while under
lock.  Also slightly cleaned up the error path.

Link: https://lore.kernel.org/r/20190922035906.10977-8-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc_sli.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index e1e0feb250031..1eb9d5f6cea05 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -11962,13 +11962,19 @@ send_current_mbox:
 	phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
 	/* Setting active mailbox pointer need to be in sync to flag clear */
 	phba->sli.mbox_active = NULL;
+	if (bf_get(lpfc_trailer_consumed, mcqe))
+		lpfc_sli4_mq_release(phba->sli4_hba.mbx_wq);
 	spin_unlock_irqrestore(&phba->hbalock, iflags);
 	/* Wake up worker thread to post the next pending mailbox command */
 	lpfc_worker_wake_up(phba);
+	return workposted;
+
 out_no_mqe_complete:
+	spin_lock_irqsave(&phba->hbalock, iflags);
 	if (bf_get(lpfc_trailer_consumed, mcqe))
 		lpfc_sli4_mq_release(phba->sli4_hba.mbx_wq);
-	return workposted;
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+	return false;
 }
 
 /**
-- 
2.20.1

[PATCH AUTOSEL 4.9 05/42] scsi: target: compare full CHAP_A Algorithm strings

[Sasha Levin]

From: David Disseldorp <ddiss@suse.de>

[ Upstream commit 9cef2a7955f2754257a7cddedec16edae7b587d0 ]

RFC 2307 states:

  For CHAP [RFC1994], in the first step, the initiator MUST send:

      CHAP_A=<A1,A2...>

   Where A1,A2... are proposed algorithms, in order of preference.
...
   For the Algorithm, as stated in [RFC1994], one value is required to
   be implemented:

       5     (CHAP with MD5)

LIO currently checks for this value by only comparing a single byte in
the tokenized Algorithm string, which means that any value starting with
a '5' (e.g. "55") is interpreted as "CHAP with MD5". Fix this by
comparing the entire tokenized string.

Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: David Disseldorp <ddiss@suse.de>
Link: https://lore.kernel.org/r/20190912095547.22427-2-ddiss@suse.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/target/iscsi/iscsi_target_auth.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/target/iscsi/iscsi_target_auth.c b/drivers/target/iscsi/iscsi_target_auth.c
index f0d97305575d7..aa3f98994c7d6 100644
--- a/drivers/target/iscsi/iscsi_target_auth.c
+++ b/drivers/target/iscsi/iscsi_target_auth.c
@@ -74,7 +74,7 @@ static int chap_check_algorithm(const char *a_str)
 		if (!token)
 			goto out;
 
-		if (!strncmp(token, "5", 1)) {
+		if (!strcmp(token, "5")) {
 			pr_debug("Selected MD5 Algorithm\n");
 			kfree(orig);
 			return CHAP_DIGEST_MD5;
-- 
2.20.1

[PATCH AUTOSEL 4.9 06/42] scsi: lpfc: Fix SLI3 hba in loop mode not discovering devices

[Sasha Levin]

From: James Smart <jsmart2021@gmail.com>

[ Upstream commit feff8b3d84d3d9570f893b4d83e5eab6693d6a52 ]

When operating in private loop mode, PLOGI exchanges are racing and the
driver tries to abort it's PLOGI. But the PLOGI abort ends up terminating
the login with the other end causing the other end to abort its PLOGI as
well. Discovery never fully completes.

Fix by disabling the PLOGI abort when private loop and letting the state
machine play out.

Link: https://lore.kernel.org/r/20191018211832.7917-5-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc_nportdisc.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index 21ec7b5b6c85c..fefef2884d590 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -454,8 +454,10 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 	 * single discovery thread, this will cause a huge delay in
 	 * discovery. Also this will cause multiple state machines
 	 * running in parallel for this node.
+	 * This only applies to a fabric environment.
 	 */
-	if (ndlp->nlp_state == NLP_STE_PLOGI_ISSUE) {
+	if ((ndlp->nlp_state == NLP_STE_PLOGI_ISSUE) &&
+	    (vport->fc_flag & FC_FABRIC)) {
 		/* software abort outstanding PLOGI */
 		lpfc_els_abort(phba, ndlp);
 	}
-- 
2.20.1

[PATCH AUTOSEL 4.9 07/42] scsi: csiostor: Don't enable IRQs too early

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit d6c9b31ac3064fbedf8961f120a4c117daa59932 ]

These are called with IRQs disabled from csio_mgmt_tmo_handler() so we
can't call spin_unlock_irq() or it will enable IRQs prematurely.

Fixes: a3667aaed569 ("[SCSI] csiostor: Chelsio FCoE offload driver")
Link: https://lore.kernel.org/r/20191019085913.GA14245@mwanda
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/csiostor/csio_lnode.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/scsi/csiostor/csio_lnode.c b/drivers/scsi/csiostor/csio_lnode.c
index be5ee2d378155..957767d383610 100644
--- a/drivers/scsi/csiostor/csio_lnode.c
+++ b/drivers/scsi/csiostor/csio_lnode.c
@@ -301,6 +301,7 @@ csio_ln_fdmi_rhba_cbfn(struct csio_hw *hw, struct csio_ioreq *fdmi_req)
 	struct fc_fdmi_port_name *port_name;
 	uint8_t buf[64];
 	uint8_t *fc4_type;
+	unsigned long flags;
 
 	if (fdmi_req->wr_status != FW_SUCCESS) {
 		csio_ln_dbg(ln, "WR error:%x in processing fdmi rhba cmd\n",
@@ -377,13 +378,13 @@ csio_ln_fdmi_rhba_cbfn(struct csio_hw *hw, struct csio_ioreq *fdmi_req)
 	len = (uint32_t)(pld - (uint8_t *)cmd);
 
 	/* Submit FDMI RPA request */
-	spin_lock_irq(&hw->lock);
+	spin_lock_irqsave(&hw->lock, flags);
 	if (csio_ln_mgmt_submit_req(fdmi_req, csio_ln_fdmi_done,
 				FCOE_CT, &fdmi_req->dma_buf, len)) {
 		CSIO_INC_STATS(ln, n_fdmi_err);
 		csio_ln_dbg(ln, "Failed to issue fdmi rpa req\n");
 	}
-	spin_unlock_irq(&hw->lock);
+	spin_unlock_irqrestore(&hw->lock, flags);
 }
 
 /*
@@ -404,6 +405,7 @@ csio_ln_fdmi_dprt_cbfn(struct csio_hw *hw, struct csio_ioreq *fdmi_req)
 	struct fc_fdmi_rpl *reg_pl;
 	struct fs_fdmi_attrs *attrib_blk;
 	uint8_t buf[64];
+	unsigned long flags;
 
 	if (fdmi_req->wr_status != FW_SUCCESS) {
 		csio_ln_dbg(ln, "WR error:%x in processing fdmi dprt cmd\n",
@@ -483,13 +485,13 @@ csio_ln_fdmi_dprt_cbfn(struct csio_hw *hw, struct csio_ioreq *fdmi_req)
 	attrib_blk->numattrs = htonl(numattrs);
 
 	/* Submit FDMI RHBA request */
-	spin_lock_irq(&hw->lock);
+	spin_lock_irqsave(&hw->lock, flags);
 	if (csio_ln_mgmt_submit_req(fdmi_req, csio_ln_fdmi_rhba_cbfn,
 				FCOE_CT, &fdmi_req->dma_buf, len)) {
 		CSIO_INC_STATS(ln, n_fdmi_err);
 		csio_ln_dbg(ln, "Failed to issue fdmi rhba req\n");
 	}
-	spin_unlock_irq(&hw->lock);
+	spin_unlock_irqrestore(&hw->lock, flags);
 }
 
 /*
@@ -504,6 +506,7 @@ csio_ln_fdmi_dhba_cbfn(struct csio_hw *hw, struct csio_ioreq *fdmi_req)
 	void *cmd;
 	struct fc_fdmi_port_name *port_name;
 	uint32_t len;
+	unsigned long flags;
 
 	if (fdmi_req->wr_status != FW_SUCCESS) {
 		csio_ln_dbg(ln, "WR error:%x in processing fdmi dhba cmd\n",
@@ -534,13 +537,13 @@ csio_ln_fdmi_dhba_cbfn(struct csio_hw *hw, struct csio_ioreq *fdmi_req)
 	len += sizeof(*port_name);
 
 	/* Submit FDMI request */
-	spin_lock_irq(&hw->lock);
+	spin_lock_irqsave(&hw->lock, flags);
 	if (csio_ln_mgmt_submit_req(fdmi_req, csio_ln_fdmi_dprt_cbfn,
 				FCOE_CT, &fdmi_req->dma_buf, len)) {
 		CSIO_INC_STATS(ln, n_fdmi_err);
 		csio_ln_dbg(ln, "Failed to issue fdmi dprt req\n");
 	}
-	spin_unlock_irq(&hw->lock);
+	spin_unlock_irqrestore(&hw->lock, flags);
 }
 
 /**
-- 
2.20.1

[PATCH AUTOSEL 4.9 15/42] scsi: tracing: Fix handling of TRANSFER LENGTH == 0 for READ(6) and WRITE(6)

[Sasha Levin]

From: Bart Van Assche <bvanassche@acm.org>

[ Upstream commit f6b8540f40201bff91062dd64db8e29e4ddaaa9d ]

According to SBC-2 a TRANSFER LENGTH field of zero means that 256 logical
blocks must be transferred. Make the SCSI tracing code follow SBC-2.

Fixes: bf8162354233 ("[SCSI] add scsi trace core functions and put trace points")
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Link: https://lore.kernel.org/r/20191105215553.185018-1-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/scsi_trace.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/scsi_trace.c b/drivers/scsi/scsi_trace.c
index 0ff083bbf5b1f..617a607375908 100644
--- a/drivers/scsi/scsi_trace.c
+++ b/drivers/scsi/scsi_trace.c
@@ -30,15 +30,18 @@ static const char *
 scsi_trace_rw6(struct trace_seq *p, unsigned char *cdb, int len)
 {
 	const char *ret = trace_seq_buffer_ptr(p);
-	sector_t lba = 0, txlen = 0;
+	u32 lba = 0, txlen;
 
 	lba |= ((cdb[1] & 0x1F) << 16);
 	lba |=  (cdb[2] << 8);
 	lba |=   cdb[3];
-	txlen = cdb[4];
+	/*
+	 * From SBC-2: a TRANSFER LENGTH field set to zero specifies that 256
+	 * logical blocks shall be read (READ(6)) or written (WRITE(6)).
+	 */
+	txlen = cdb[4] ? cdb[4] : 256;
 
-	trace_seq_printf(p, "lba=%llu txlen=%llu",
-			 (unsigned long long)lba, (unsigned long long)txlen);
+	trace_seq_printf(p, "lba=%u txlen=%u", lba, txlen);
 	trace_seq_putc(p, 0);
 
 	return ret;
-- 
2.20.1

[PATCH AUTOSEL 4.9 16/42] scsi: lpfc: Fix duplicate unreg_rpi error in port offline flow

[Sasha Levin]

From: James Smart <jsmart2021@gmail.com>

[ Upstream commit 7cfd5639d99bec0d27af089d0c8c114330e43a72 ]

If the driver receives a login that is later then LOGO'd by the remote port
(aka ndlp), the driver, upon the completion of the LOGO ACC transmission,
will logout the node and unregister the rpi that is being used for the
node.  As part of the unreg, the node's rpi value is replaced by the
LPFC_RPI_ALLOC_ERROR value.  If the port is subsequently offlined, the
offline walks the nodes and ensures they are logged out, which possibly
entails unreg'ing their rpi values.  This path does not validate the node's
rpi value, thus doesn't detect that it has been unreg'd already.  The
replaced rpi value is then used when accessing the rpi bitmask array which
tracks active rpi values.  As the LPFC_RPI_ALLOC_ERROR value is not a valid
index for the bitmask, it may fault the system.

Revise the rpi release code to detect when the rpi value is the replaced
RPI_ALLOC_ERROR value and ignore further release steps.

Link: https://lore.kernel.org/r/20191105005708.7399-2-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc_sli.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 1eb9d5f6cea05..cbe808e83f477 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -15995,6 +15995,13 @@ lpfc_sli4_alloc_rpi(struct lpfc_hba *phba)
 static void
 __lpfc_sli4_free_rpi(struct lpfc_hba *phba, int rpi)
 {
+	/*
+	 * if the rpi value indicates a prior unreg has already
+	 * been done, skip the unreg.
+	 */
+	if (rpi == LPFC_RPI_ALLOC_ERROR)
+		return;
+
 	if (test_and_clear_bit(rpi, phba->sli4_hba.rpi_bmask)) {
 		phba->sli4_hba.rpi_count--;
 		phba->sli4_hba.max_cfg_param.rpi_used--;
-- 
2.20.1

[PATCH AUTOSEL 4.9 22/42] scsi: lpfc: fix: Coverity: lpfc_cmpl_els_rsp(): Null pointer dereferences

[Sasha Levin]

From: James Smart <jsmart2021@gmail.com>

[ Upstream commit 6c6d59e0fe5b86cf273d6d744a6a9768c4ecc756 ]

Coverity reported the following:

*** CID 101747:  Null pointer dereferences  (FORWARD_NULL)
/drivers/scsi/lpfc/lpfc_els.c: 4439 in lpfc_cmpl_els_rsp()
4433     			kfree(mp);
4434     		}
4435     		mempool_free(mbox, phba->mbox_mem_pool);
4436     	}
4437     out:
4438     	if (ndlp && NLP_CHK_NODE_ACT(ndlp)) {
vvv     CID 101747:  Null pointer dereferences  (FORWARD_NULL)
vvv     Dereferencing null pointer "shost".
4439     		spin_lock_irq(shost->host_lock);
4440     		ndlp->nlp_flag &= ~(NLP_ACC_REGLOGIN | NLP_RM_DFLT_RPI);
4441     		spin_unlock_irq(shost->host_lock);
4442
4443     		/* If the node is not being used by another discovery thread,
4444     		 * and we are sending a reject, we are done with it.

Fix by adding a check for non-null shost in line 4438.
The scenario when shost is set to null is when ndlp is null.
As such, the ndlp check present was sufficient. But better safe
than sorry so add the shost check.

Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 101747 ("Null pointer dereferences")
Fixes: 2e0fef85e098 ("[SCSI] lpfc: NPIV: split ports")

CC: James Bottomley <James.Bottomley@SteelEye.com>
CC: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
CC: linux-next@vger.kernel.org
Link: https://lore.kernel.org/r/20191111230401.12958-3-jsmart2021@gmail.com
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc_els.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 3702497b5b169..4901bf24916b5 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -3863,7 +3863,7 @@ lpfc_cmpl_els_rsp(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 		mempool_free(mbox, phba->mbox_mem_pool);
 	}
 out:
-	if (ndlp && NLP_CHK_NODE_ACT(ndlp)) {
+	if (ndlp && NLP_CHK_NODE_ACT(ndlp) && shost) {
 		spin_lock_irq(shost->host_lock);
 		ndlp->nlp_flag &= ~(NLP_ACC_REGLOGIN | NLP_RM_DFLT_RPI);
 		spin_unlock_irq(shost->host_lock);
-- 
2.20.1

[PATCH AUTOSEL 4.9 23/42] scsi: ufs: fix potential bug which ends in system hang

[Sasha Levin]

From: Bean Huo <beanhuo@micron.com>

[ Upstream commit cfcbae3895b86c390ede57b2a8f601dd5972b47b ]

In function __ufshcd_query_descriptor(), in the event of an error
happening, we directly goto out_unlock and forget to invaliate
hba->dev_cmd.query.descriptor pointer. This results in this pointer still
valid in ufshcd_copy_query_response() for other query requests which go
through ufshcd_exec_raw_upiu_cmd(). This will cause __memcpy() crash and
system hangs. Log as shown below:

Unable to handle kernel paging request at virtual address
ffff000012233c40
Mem abort info:
   ESR = 0x96000047
   Exception class = DABT (current EL), IL = 32 bits
   SET = 0, FnV = 0
   EA = 0, S1PTW = 0
Data abort info:
   ISV = 0, ISS = 0x00000047
   CM = 0, WnR = 1
swapper pgtable: 4k pages, 48-bit VAs, pgdp = 0000000028cc735c
[ffff000012233c40] pgd=00000000bffff003, pud=00000000bfffe003,
pmd=00000000ba8b8003, pte=0000000000000000
 Internal error: Oops: 96000047 [#2] PREEMPT SMP
 ...
 Call trace:
  __memcpy+0x74/0x180
  ufshcd_issue_devman_upiu_cmd+0x250/0x3c0
  ufshcd_exec_raw_upiu_cmd+0xfc/0x1a8
  ufs_bsg_request+0x178/0x3b0
  bsg_queue_rq+0xc0/0x118
  blk_mq_dispatch_rq_list+0xb0/0x538
  blk_mq_sched_dispatch_requests+0x18c/0x1d8
  __blk_mq_run_hw_queue+0xb4/0x118
  blk_mq_run_work_fn+0x28/0x38
  process_one_work+0x1ec/0x470
  worker_thread+0x48/0x458
  kthread+0x130/0x138
  ret_from_fork+0x10/0x1c
 Code: 540000ab a8c12027 a88120c7 a8c12027 (a88120c7)
 ---[ end trace 793e1eb5dff69f2d ]---
 note: kworker/0:2H[2054] exited with preempt_count 1

This patch is to move "descriptor = NULL" down to below the label
"out_unlock".

Fixes: d44a5f98bb49b2(ufs: query descriptor API)
Link: https://lore.kernel.org/r/20191112223436.27449-3-huobean@gmail.com
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ufs/ufshcd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 26f259fb6e3ca..094e879af1213 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -2006,10 +2006,10 @@ static int __ufshcd_query_descriptor(struct ufs_hba *hba,
 		goto out_unlock;
 	}
 
-	hba->dev_cmd.query.descriptor = NULL;
 	*buf_len = be16_to_cpu(response->upiu_res.length);
 
 out_unlock:
+	hba->dev_cmd.query.descriptor = NULL;
 	mutex_unlock(&hba->dev_cmd.lock);
 out:
 	ufshcd_release(hba);
-- 
2.20.1

[PATCH AUTOSEL 4.9 26/42] scsi: atari_scsi: sun3_scsi: Set sg_tablesize to 1 instead of SG_NONE

[Sasha Levin]

From: Finn Thain <fthain@telegraphics.com.au>

[ Upstream commit 79172ab20bfd8437b277254028efdb68484e2c21 ]

Since the scsi subsystem adopted the blk-mq API, a host with zero
sg_tablesize crashes with a NULL pointer dereference.

blk_queue_max_segments: set to minimum 1
scsi 0:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    2.5+ PQ: 0 ANSI: 5
scsi target0:0:0: Beginning Domain Validation
scsi target0:0:0: Domain Validation skipping write tests
scsi target0:0:0: Ending Domain Validation
blk_queue_max_segments: set to minimum 1
scsi 0:0:1:0: Direct-Access     QEMU     QEMU HARDDISK    2.5+ PQ: 0 ANSI: 5
scsi target0:0:1: Beginning Domain Validation
scsi target0:0:1: Domain Validation skipping write tests
scsi target0:0:1: Ending Domain Validation
blk_queue_max_segments: set to minimum 1
scsi 0:0:2:0: CD-ROM            QEMU     QEMU CD-ROM      2.5+ PQ: 0 ANSI: 5
scsi target0:0:2: Beginning Domain Validation
scsi target0:0:2: Domain Validation skipping write tests
scsi target0:0:2: Ending Domain Validation
blk_queue_max_segments: set to minimum 1
blk_queue_max_segments: set to minimum 1
blk_queue_max_segments: set to minimum 1
blk_queue_max_segments: set to minimum 1
sr 0:0:2:0: Power-on or device reset occurred
sd 0:0:0:0: Power-on or device reset occurred
sd 0:0:1:0: Power-on or device reset occurred
sd 0:0:0:0: [sda] 10485762 512-byte logical blocks: (5.37 GB/5.00 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Unable to handle kernel NULL pointer dereference at virtual address (ptrval)
Oops: 00000000
Modules linked in:
PC: [<001cd874>] blk_mq_free_request+0x66/0xe2
SR: 2004  SP: (ptrval)  a2: 00874520
d0: 00000000    d1: 00000000    d2: 009ba800    d3: 00000000
d4: 00000000    d5: 08000002    a0: 0087be68    a1: 009a81e0
Process kworker/u2:2 (pid: 15, task=(ptrval))
Frame format=7 eff addr=0000007a ssw=0505 faddr=0000007a
wb 1 stat/addr/data: 0000 00000000 00000000
wb 2 stat/addr/data: 0000 00000000 00000000
wb 3 stat/addr/data: 0000 0000007a 00000000
push data: 00000000 00000000 00000000 00000000
Stack from 0087bd98:
        00000002 00000000 0087be72 009a7820 0087bdb4 001c4f6c 009a7820 0087bdd4
        0024d200 009a7820 0024d0dc 0087be72 009baa00 0087be68 009a5000 0087be7c
        00265d10 009a5000 0087be72 00000003 00000000 00000000 00000000 0087be68
        00000bb8 00000005 00000000 00000000 00000000 00000000 00265c56 00000000
        009ba60c 0036ddf4 00000002 ffffffff 009baa00 009ba600 009a50d6 0087be74
        00227ba0 009baa08 00000001 009baa08 009ba60c 0036ddf4 00000000 00000000
Call Trace: [<001c4f6c>] blk_put_request+0xe/0x14
 [<0024d200>] __scsi_execute+0x124/0x174
 [<0024d0dc>] __scsi_execute+0x0/0x174
 [<00265d10>] sd_revalidate_disk+0xba/0x1f02
 [<00265c56>] sd_revalidate_disk+0x0/0x1f02
 [<0036ddf4>] strlen+0x0/0x22
 [<00227ba0>] device_add+0x3da/0x604
 [<0036ddf4>] strlen+0x0/0x22
 [<00267e64>] sd_probe+0x30c/0x4b4
 [<0002da44>] process_one_work+0x0/0x402
 [<0022b978>] really_probe+0x226/0x354
 [<0022bc34>] driver_probe_device+0xa4/0xf0
 [<0002da44>] process_one_work+0x0/0x402
 [<0022bcd0>] __driver_attach_async_helper+0x50/0x70
 [<00035dae>] async_run_entry_fn+0x36/0x130
 [<0002db88>] process_one_work+0x144/0x402
 [<0002e1aa>] worker_thread+0x0/0x570
 [<0002e29a>] worker_thread+0xf0/0x570
 [<0002e1aa>] worker_thread+0x0/0x570
 [<003768d8>] schedule+0x0/0xb8
 [<0003f58c>] __init_waitqueue_head+0x0/0x12
 [<00033e92>] kthread+0xc2/0xf6
 [<000331e8>] kthread_parkme+0x0/0x4e
 [<003768d8>] schedule+0x0/0xb8
 [<00033dd0>] kthread+0x0/0xf6
 [<00002c10>] ret_from_kernel_thread+0xc/0x14
Code: 0280 0006 0800 56c0 4400 0280 0000 00ff <52b4> 0c3a 082b 0006 0013 6706 2042 53a8 00c4 4ab9 0047 3374 6640 202d 000c 670c
Disabling lock debugging due to kernel taint

Avoid this by setting sg_tablesize = 1.

Link: https://lore.kernel.org/r/4567bcae94523b47d6f3b77450ba305823bca479.1572656814.git.fthain@telegraphics.com.au
Reported-and-tested-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
References: commit 68ab2d76e4be ("scsi: cxlflash: Set sg_tablesize to 1 instead of SG_NONE")
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/atari_scsi.c | 6 +++---
 drivers/scsi/mac_scsi.c   | 2 +-
 drivers/scsi/sun3_scsi.c  | 4 ++--
 3 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/scsi/atari_scsi.c b/drivers/scsi/atari_scsi.c
index a59ad94ea52b3..9dc4b689f94b0 100644
--- a/drivers/scsi/atari_scsi.c
+++ b/drivers/scsi/atari_scsi.c
@@ -753,7 +753,7 @@ static int __init atari_scsi_probe(struct platform_device *pdev)
 		atari_scsi_template.sg_tablesize = SG_ALL;
 	} else {
 		atari_scsi_template.can_queue    = 1;
-		atari_scsi_template.sg_tablesize = SG_NONE;
+		atari_scsi_template.sg_tablesize = 1;
 	}
 
 	if (setup_can_queue > 0)
@@ -762,8 +762,8 @@ static int __init atari_scsi_probe(struct platform_device *pdev)
 	if (setup_cmd_per_lun > 0)
 		atari_scsi_template.cmd_per_lun = setup_cmd_per_lun;
 
-	/* Leave sg_tablesize at 0 on a Falcon! */
-	if (ATARIHW_PRESENT(TT_SCSI) && setup_sg_tablesize >= 0)
+	/* Don't increase sg_tablesize on Falcon! */
+	if (ATARIHW_PRESENT(TT_SCSI) && setup_sg_tablesize > 0)
 		atari_scsi_template.sg_tablesize = setup_sg_tablesize;
 
 	if (setup_hostid >= 0) {
diff --git a/drivers/scsi/mac_scsi.c b/drivers/scsi/mac_scsi.c
index 5648d30c73768..5aa60bbbd09ad 100644
--- a/drivers/scsi/mac_scsi.c
+++ b/drivers/scsi/mac_scsi.c
@@ -378,7 +378,7 @@ static int __init mac_scsi_probe(struct platform_device *pdev)
 		mac_scsi_template.can_queue = setup_can_queue;
 	if (setup_cmd_per_lun > 0)
 		mac_scsi_template.cmd_per_lun = setup_cmd_per_lun;
-	if (setup_sg_tablesize >= 0)
+	if (setup_sg_tablesize > 0)
 		mac_scsi_template.sg_tablesize = setup_sg_tablesize;
 	if (setup_hostid >= 0)
 		mac_scsi_template.this_id = setup_hostid & 7;
diff --git a/drivers/scsi/sun3_scsi.c b/drivers/scsi/sun3_scsi.c
index 3c4c07038948d..6f75693cf7d28 100644
--- a/drivers/scsi/sun3_scsi.c
+++ b/drivers/scsi/sun3_scsi.c
@@ -419,7 +419,7 @@ static struct scsi_host_template sun3_scsi_template = {
 	.eh_bus_reset_handler	= sun3scsi_bus_reset,
 	.can_queue		= 16,
 	.this_id		= 7,
-	.sg_tablesize		= SG_NONE,
+	.sg_tablesize		= 1,
 	.cmd_per_lun		= 2,
 	.use_clustering		= DISABLE_CLUSTERING,
 	.cmd_size		= NCR5380_CMD_SIZE,
@@ -440,7 +440,7 @@ static int __init sun3_scsi_probe(struct platform_device *pdev)
 		sun3_scsi_template.can_queue = setup_can_queue;
 	if (setup_cmd_per_lun > 0)
 		sun3_scsi_template.cmd_per_lun = setup_cmd_per_lun;
-	if (setup_sg_tablesize >= 0)
+	if (setup_sg_tablesize > 0)
 		sun3_scsi_template.sg_tablesize = setup_sg_tablesize;
 	if (setup_hostid >= 0)
 		sun3_scsi_template.this_id = setup_hostid & 7;
-- 
2.20.1

[PATCH AUTOSEL 4.9 32/42] scsi: pm80xx: Fix for SATA device discovery

[Sasha Levin]

From: peter chang <dpf@google.com>

[ Upstream commit ce21c63ee995b7a8b7b81245f2cee521f8c3c220 ]

Driver was missing complete() call in mpi_sata_completion which result in
SATA abort error handling timing out. That causes the device to be left in
the in_recovery state so subsequent commands sent to the device fail and
the OS removes access to it.

Link: https://lore.kernel.org/r/20191114100910.6153-2-deepak.ukey@microchip.com
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: peter chang <dpf@google.com>
Signed-off-by: Deepak Ukey <deepak.ukey@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/pm8001/pm80xx_hwi.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index 9edd61c063a1a..df5f0bc295875 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -2368,6 +2368,8 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
 			pm8001_printk("task 0x%p done with io_status 0x%x"
 			" resp 0x%x stat 0x%x but aborted by upper layer!\n",
 			t, status, ts->resp, ts->stat));
+		if (t->slow_task)
+			complete(&t->slow_task->completion);
 		pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
 	} else {
 		spin_unlock_irqrestore(&t->task_state_lock, flags);
-- 
2.20.1

[PATCH AUTOSEL 4.9 33/42] scsi: scsi_debug: num_tgts must be >= 0

[Sasha Levin]

From: Maurizio Lombardi <mlombard@redhat.com>

[ Upstream commit aa5334c4f3014940f11bf876e919c956abef4089 ]

Passing the parameter "num_tgts=-1" will start an infinite loop that
exhausts the system memory

Link: https://lore.kernel.org/r/20191115163727.24626-1-mlombard@redhat.com
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/scsi_debug.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index 2b0e61557317f..d7118d3767c35 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -4953,6 +4953,11 @@ static int __init scsi_debug_init(void)
 		return -EINVAL;
 	}
 
+	if (sdebug_num_tgts < 0) {
+		pr_err("num_tgts must be >= 0\n");
+		return -EINVAL;
+	}
+
 	if (sdebug_guard > 1) {
 		pr_err("guard must be 0 or 1\n");
 		return -EINVAL;
-- 
2.20.1

[PATCH AUTOSEL 4.9 34/42] scsi: target: iscsi: Wait for all commands to finish before freeing a session

[Sasha Levin]

From: Bart Van Assche <bvanassche@acm.org>

[ Upstream commit e9d3009cb936bd0faf0719f68d98ad8afb1e613b ]

The iSCSI target driver is the only target driver that does not wait for
ongoing commands to finish before freeing a session. Make the iSCSI target
driver wait for ongoing commands to finish before freeing a session. This
patch fixes the following KASAN complaint:

BUG: KASAN: use-after-free in __lock_acquire+0xb1a/0x2710
Read of size 8 at addr ffff8881154eca70 by task kworker/0:2/247

CPU: 0 PID: 247 Comm: kworker/0:2 Not tainted 5.4.0-rc1-dbg+ #6
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
Workqueue: target_completion target_complete_ok_work [target_core_mod]
Call Trace:
 dump_stack+0x8a/0xd6
 print_address_description.constprop.0+0x40/0x60
 __kasan_report.cold+0x1b/0x33
 kasan_report+0x16/0x20
 __asan_load8+0x58/0x90
 __lock_acquire+0xb1a/0x2710
 lock_acquire+0xd3/0x200
 _raw_spin_lock_irqsave+0x43/0x60
 target_release_cmd_kref+0x162/0x7f0 [target_core_mod]
 target_put_sess_cmd+0x2e/0x40 [target_core_mod]
 lio_check_stop_free+0x12/0x20 [iscsi_target_mod]
 transport_cmd_check_stop_to_fabric+0xd8/0xe0 [target_core_mod]
 target_complete_ok_work+0x1b0/0x790 [target_core_mod]
 process_one_work+0x549/0xa40
 worker_thread+0x7a/0x5d0
 kthread+0x1bc/0x210
 ret_from_fork+0x24/0x30

Allocated by task 889:
 save_stack+0x23/0x90
 __kasan_kmalloc.constprop.0+0xcf/0xe0
 kasan_slab_alloc+0x12/0x20
 kmem_cache_alloc+0xf6/0x360
 transport_alloc_session+0x29/0x80 [target_core_mod]
 iscsi_target_login_thread+0xcd6/0x18f0 [iscsi_target_mod]
 kthread+0x1bc/0x210
 ret_from_fork+0x24/0x30

Freed by task 1025:
 save_stack+0x23/0x90
 __kasan_slab_free+0x13a/0x190
 kasan_slab_free+0x12/0x20
 kmem_cache_free+0x146/0x400
 transport_free_session+0x179/0x2f0 [target_core_mod]
 transport_deregister_session+0x130/0x180 [target_core_mod]
 iscsit_close_session+0x12c/0x350 [iscsi_target_mod]
 iscsit_logout_post_handler+0x136/0x380 [iscsi_target_mod]
 iscsit_response_queue+0x8de/0xbe0 [iscsi_target_mod]
 iscsi_target_tx_thread+0x27f/0x370 [iscsi_target_mod]
 kthread+0x1bc/0x210
 ret_from_fork+0x24/0x30

The buggy address belongs to the object at ffff8881154ec9c0
 which belongs to the cache se_sess_cache of size 352
The buggy address is located 176 bytes inside of
 352-byte region [ffff8881154ec9c0, ffff8881154ecb20)
The buggy address belongs to the page:
page:ffffea0004553b00 refcount:1 mapcount:0 mapping:ffff888101755400 index:0x0 compound_mapcount: 0
flags: 0x2fff000000010200(slab|head)
raw: 2fff000000010200 dead000000000100 dead000000000122 ffff888101755400
raw: 0000000000000000 0000000080130013 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8881154ec900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff8881154ec980: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
>ffff8881154eca00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                                             ^
 ffff8881154eca80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff8881154ecb00: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc

Cc: Mike Christie <mchristi@redhat.com>
Link: https://lore.kernel.org/r/20191113220508.198257-3-bvanassche@acm.org
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/target/iscsi/iscsi_target.c | 10 ++++++++--
 include/scsi/iscsi_proto.h          |  1 +
 2 files changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c
index b6c4f55f79e7a..e5674e5857bf8 100644
--- a/drivers/target/iscsi/iscsi_target.c
+++ b/drivers/target/iscsi/iscsi_target.c
@@ -1168,7 +1168,9 @@ int iscsit_setup_scsi_cmd(struct iscsi_conn *conn, struct iscsi_cmd *cmd,
 		hdr->cmdsn, be32_to_cpu(hdr->data_length), payload_length,
 		conn->cid);
 
-	target_get_sess_cmd(&cmd->se_cmd, true);
+	if (target_get_sess_cmd(&cmd->se_cmd, true) < 0)
+		return iscsit_add_reject_cmd(cmd,
+				ISCSI_REASON_WAITING_FOR_LOGOUT, buf);
 
 	cmd->sense_reason = transport_lookup_cmd_lun(&cmd->se_cmd,
 						     scsilun_to_int(&hdr->lun));
@@ -1986,7 +1988,9 @@ iscsit_handle_task_mgt_cmd(struct iscsi_conn *conn, struct iscsi_cmd *cmd,
 			      conn->sess->se_sess, 0, DMA_NONE,
 			      TCM_SIMPLE_TAG, cmd->sense_buffer + 2);
 
-	target_get_sess_cmd(&cmd->se_cmd, true);
+	if (target_get_sess_cmd(&cmd->se_cmd, true) < 0)
+		return iscsit_add_reject_cmd(cmd,
+				ISCSI_REASON_WAITING_FOR_LOGOUT, buf);
 
 	/*
 	 * TASK_REASSIGN for ERL=2 / connection stays inside of
@@ -4243,6 +4247,8 @@ int iscsit_close_connection(
 	 * must wait until they have completed.
 	 */
 	iscsit_check_conn_usage_count(conn);
+	target_sess_cmd_list_set_waiting(sess->se_sess);
+	target_wait_for_sess_cmds(sess->se_sess);
 
 	ahash_request_free(conn->conn_tx_hash);
 	if (conn->conn_rx_hash) {
diff --git a/include/scsi/iscsi_proto.h b/include/scsi/iscsi_proto.h
index c1260d80ef30d..1a2ae0862e23a 100644
--- a/include/scsi/iscsi_proto.h
+++ b/include/scsi/iscsi_proto.h
@@ -638,6 +638,7 @@ struct iscsi_reject {
 #define ISCSI_REASON_BOOKMARK_INVALID	9
 #define ISCSI_REASON_BOOKMARK_NO_RESOURCES	10
 #define ISCSI_REASON_NEGOTIATION_RESET	11
+#define ISCSI_REASON_WAITING_FOR_LOGOUT	12
 
 /* Max. number of Key=Value pairs in a text message */
 #define MAX_KEY_VALUE_PAIRS	8192
-- 
2.20.1

[PATCH AUTOSEL 4.9 37/42] cdrom: respect device capabilities during opening action

[Sasha Levin]

From: Diego Elio Pettenò <flameeyes@flameeyes.com>

[ Upstream commit 366ba7c71ef77c08d06b18ad61b26e2df7352338 ]

Reading the TOC only works if the device can play audio, otherwise
these commands fail (and possibly bring the device to an unhealthy
state.)

Similarly, cdrom_mmc3_profile() should only be called if the device
supports generic packet commands.

To: Jens Axboe <axboe@kernel.dk>
Cc: linux-kernel@vger.kernel.org
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Diego Elio Pettenò <flameeyes@flameeyes.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cdrom/cdrom.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/cdrom/cdrom.c b/drivers/cdrom/cdrom.c
index a46f188f679e7..782dbab5ad56a 100644
--- a/drivers/cdrom/cdrom.c
+++ b/drivers/cdrom/cdrom.c
@@ -998,6 +998,12 @@ static void cdrom_count_tracks(struct cdrom_device_info *cdi, tracktype *tracks)
 	tracks->xa = 0;
 	tracks->error = 0;
 	cd_dbg(CD_COUNT_TRACKS, "entering cdrom_count_tracks\n");
+
+	if (!CDROM_CAN(CDC_PLAY_AUDIO)) {
+		tracks->error = CDS_NO_INFO;
+		return;
+	}
+
 	/* Grab the TOC header so we can see how many tracks there are */
 	ret = cdi->ops->audio_ioctl(cdi, CDROMREADTOCHDR, &header);
 	if (ret) {
@@ -1164,7 +1170,8 @@ int cdrom_open(struct cdrom_device_info *cdi, struct block_device *bdev,
 		ret = open_for_data(cdi);
 		if (ret)
 			goto err;
-		cdrom_mmc3_profile(cdi);
+		if (CDROM_CAN(CDC_GENERIC_PACKET))
+			cdrom_mmc3_profile(cdi);
 		if (mode & FMODE_WRITE) {
 			ret = -EROFS;
 			if (cdrom_open_write(cdi))
@@ -2873,6 +2880,9 @@ int cdrom_get_last_written(struct cdrom_device_info *cdi, long *last_written)
 	   it doesn't give enough information or fails. then we return
 	   the toc contents. */
 use_toc:
+	if (!CDROM_CAN(CDC_PLAY_AUDIO))
+		return -ENOSYS;
+
 	toc.cdte_format = CDROM_MSF;
 	toc.cdte_track = CDROM_LEADOUT;
 	if ((ret = cdi->ops->audio_ioctl(cdi, CDROMREADTOCENTRY, &toc)))
-- 
2.20.1