[PATCH AUTOSEL 4.4 056/174] scsi: megaraid_sas: reduce module load time

[PATCH AUTOSEL 4.4 056/174] scsi: megaraid_sas: reduce module load time

[Sasha Levin]

From: Steve Sistare <steven.sistare@oracle.com>

[ Upstream commit 31b6a05f86e690e1818116fd23c3be915cc9d9ed ]

megaraid_sas takes 1+ seconds to load while waiting for firmware:

[2.822603] megaraid_sas 0000:03:00.0: Waiting for FW to come to ready state
[3.871003] megaraid_sas 0000:03:00.0: FW now in Ready state

This is due to the following loop in megasas_transition_to_ready(), which
waits a minimum of 1 second, even though the FW becomes ready in tens of
millisecs:

        /*
         * The cur_state should not last for more than max_wait secs
         */
        for (i = 0; i < max_wait; i++) {
                ...
                msleep(1000);
        ...
        dev_info(&instance->pdev->dev, "FW now in Ready state\n");

This is a regression, caused by a change of the msleep granularity from 1
to 1000 due to concern about waiting too long on systems with coarse
jiffies.

To fix, increase iterations and use msleep(20), which results in:

[2.670627] megaraid_sas 0000:03:00.0: Waiting for FW to come to ready state
[2.739386] megaraid_sas 0000:03:00.0: FW now in Ready state

Fixes: fb2f3e96d80f ("scsi: megaraid_sas: Fix msleep granularity")
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/megaraid/megaraid_sas_base.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index 7be968f60b59..1efd876f0728 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -3585,12 +3585,12 @@ megasas_transition_to_ready(struct megasas_instance *instance, int ocr)
 		/*
 		 * The cur_state should not last for more than max_wait secs
 		 */
-		for (i = 0; i < max_wait; i++) {
+		for (i = 0; i < max_wait * 50; i++) {
 			curr_abs_state = instance->instancet->
 				read_fw_status_reg(instance->reg_set);
 
 			if (abs_state == curr_abs_state) {
-				msleep(1000);
+				msleep(20);
 			} else
 				break;
 		}
-- 
2.20.1

[PATCH AUTOSEL 4.4 073/174] scsi: qla2xxx: Unregister chrdev if module initialization fails

[Sasha Levin]

From: Bart Van Assche <bvanassche@acm.org>

[ Upstream commit c794d24ec9eb6658909955772e70f34bef5b5b91 ]

If module initialization fails after the character device has been
registered, unregister the character device. Additionally, avoid
duplicating error path code.

Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Giridhar Malavali <giridhar.malavali@qlogic.com>
Fixes: 6a03b4cd78f3 ("[SCSI] qla2xxx: Add char device to increase driver use count") # v2.6.35.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_os.c | 34 +++++++++++++++++++++-------------
 1 file changed, 21 insertions(+), 13 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 611a127f08d8..8975baab73e5 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -5780,8 +5780,7 @@ qla2x00_module_init(void)
 	/* Initialize target kmem_cache and mem_pools */
 	ret = qlt_init();
 	if (ret < 0) {
-		kmem_cache_destroy(srb_cachep);
-		return ret;
+		goto destroy_cache;
 	} else if (ret > 0) {
 		/*
 		 * If initiator mode is explictly disabled by qlt_init(),
@@ -5800,11 +5799,10 @@ qla2x00_module_init(void)
 	qla2xxx_transport_template =
 	    fc_attach_transport(&qla2xxx_transport_functions);
 	if (!qla2xxx_transport_template) {
-		kmem_cache_destroy(srb_cachep);
 		ql_log(ql_log_fatal, NULL, 0x0002,
 		    "fc_attach_transport failed...Failing load!.\n");
-		qlt_exit();
-		return -ENODEV;
+		ret = -ENODEV;
+		goto qlt_exit;
 	}
 
 	apidev_major = register_chrdev(0, QLA2XXX_APIDEV, &apidev_fops);
@@ -5816,27 +5814,37 @@ qla2x00_module_init(void)
 	qla2xxx_transport_vport_template =
 	    fc_attach_transport(&qla2xxx_transport_vport_functions);
 	if (!qla2xxx_transport_vport_template) {
-		kmem_cache_destroy(srb_cachep);
-		qlt_exit();
-		fc_release_transport(qla2xxx_transport_template);
 		ql_log(ql_log_fatal, NULL, 0x0004,
 		    "fc_attach_transport vport failed...Failing load!.\n");
-		return -ENODEV;
+		ret = -ENODEV;
+		goto unreg_chrdev;
 	}
 	ql_log(ql_log_info, NULL, 0x0005,
 	    "QLogic Fibre Channel HBA Driver: %s.\n",
 	    qla2x00_version_str);
 	ret = pci_register_driver(&qla2xxx_pci_driver);
 	if (ret) {
-		kmem_cache_destroy(srb_cachep);
-		qlt_exit();
-		fc_release_transport(qla2xxx_transport_template);
-		fc_release_transport(qla2xxx_transport_vport_template);
 		ql_log(ql_log_fatal, NULL, 0x0006,
 		    "pci_register_driver failed...ret=%d Failing load!.\n",
 		    ret);
+		goto release_vport_transport;
 	}
 	return ret;
+
+release_vport_transport:
+	fc_release_transport(qla2xxx_transport_vport_template);
+
+unreg_chrdev:
+	if (apidev_major >= 0)
+		unregister_chrdev(apidev_major, QLA2XXX_APIDEV);
+	fc_release_transport(qla2xxx_transport_template);
+
+qlt_exit:
+	qlt_exit();
+
+destroy_cache:
+	kmem_cache_destroy(srb_cachep);
+	return ret;
 }
 
 /**
-- 
2.20.1

[PATCH AUTOSEL 4.4 110/174] scsi: libfc: fix null pointer dereference on a null lport

[Sasha Levin]

From: Colin Ian King <colin.king@canonical.com>

[ Upstream commit 41a6bf6529edd10a6def42e3b2c34a7474bcc2f5 ]

Currently if lport is null then the null lport pointer is dereference when
printing out debug via the FC_LPORT_DB macro. Fix this by using the more
generic FC_LIBFC_DBG debug macro instead that does not use lport.

Addresses-Coverity: ("Dereference after null check")
Fixes: 7414705ea4ae ("libfc: Add runtime debugging with debug_logging module parameter")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/libfc/fc_exch.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c
index 30f9ef0c0d4f..b20c575564e4 100644
--- a/drivers/scsi/libfc/fc_exch.c
+++ b/drivers/scsi/libfc/fc_exch.c
@@ -2499,7 +2499,7 @@ void fc_exch_recv(struct fc_lport *lport, struct fc_frame *fp)
 
 	/* lport lock ? */
 	if (!lport || lport->state == LPORT_ST_DISABLED) {
-		FC_LPORT_DBG(lport, "Receiving frames for an lport that "
+		FC_LIBFC_DBG("Receiving frames for an lport that "
 			     "has not been initialized correctly\n");
 		fc_frame_free(fp);
 		return;
-- 
2.20.1

[PATCH AUTOSEL 4.4 158/174] scsi: esas2r: unlock on error in esas2r_nvram_read_direct()

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 906ca6353ac09696c1bf0892513c8edffff5e0a6 ]

This error path is missing an unlock.

Fixes: 26780d9e12ed ("[SCSI] esas2r: ATTO Technology ExpressSAS 6G SAS/SATA RAID Adapter Driver")
Link: https://lore.kernel.org/r/20191022102324.GA27540@mwanda
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/esas2r/esas2r_flash.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/scsi/esas2r/esas2r_flash.c b/drivers/scsi/esas2r/esas2r_flash.c
index 7bd376d95ed5..b02ac389e6c6 100644
--- a/drivers/scsi/esas2r/esas2r_flash.c
+++ b/drivers/scsi/esas2r/esas2r_flash.c
@@ -1197,6 +1197,7 @@ bool esas2r_nvram_read_direct(struct esas2r_adapter *a)
 	if (!esas2r_read_flash_block(a, a->nvram, FLS_OFFSET_NVR,
 				     sizeof(struct esas2r_sas_nvram))) {
 		esas2r_hdebug("NVRAM read failed, using defaults");
+		up(&a->nvram_semaphore);
 		return false;
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 4.4 168/174] scsi: qla4xxx: fix double free bug

[Sasha Levin]

From: Pan Bian <bianpan2016@163.com>

[ Upstream commit 3fe3d2428b62822b7b030577cd612790bdd8c941 ]

The variable init_fw_cb is released twice, resulting in a double free
bug. The call to the function dma_free_coherent() before goto is removed to
get rid of potential double free.

Fixes: 2a49a78ed3c8 ("[SCSI] qla4xxx: added IPv6 support.")
Link: https://lore.kernel.org/r/1572945927-27796-1-git-send-email-bianpan2016@163.com
Signed-off-by: Pan Bian <bianpan2016@163.com>
Acked-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla4xxx/ql4_mbx.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c
index c291fdff1b33..ea3b77ba12a2 100644
--- a/drivers/scsi/qla4xxx/ql4_mbx.c
+++ b/drivers/scsi/qla4xxx/ql4_mbx.c
@@ -641,9 +641,6 @@ int qla4xxx_initialize_fw_cb(struct scsi_qla_host * ha)
 
 	if (qla4xxx_get_ifcb(ha, &mbox_cmd[0], &mbox_sts[0], init_fw_cb_dma) !=
 	    QLA_SUCCESS) {
-		dma_free_coherent(&ha->pdev->dev,
-				  sizeof(struct addr_ctrl_blk),
-				  init_fw_cb, init_fw_cb_dma);
 		goto exit_init_fw_cb;
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 4.4 169/174] scsi: bnx2i: fix potential use after free

[Sasha Levin]

From: Pan Bian <bianpan2016@163.com>

[ Upstream commit 29d28f2b8d3736ac61c28ef7e20fda63795b74d9 ]

The member hba->pcidev may be used after its reference is dropped. Move the
put function to where it is never used to avoid potential use after free
issues.

Fixes: a77171806515 ("[SCSI] bnx2i: Removed the reference to the netdev->base_addr")
Link: https://lore.kernel.org/r/1573043541-19126-1-git-send-email-bianpan2016@163.com
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/bnx2i/bnx2i_iscsi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/bnx2i/bnx2i_iscsi.c b/drivers/scsi/bnx2i/bnx2i_iscsi.c
index 72894378ffcf..81de52943b01 100644
--- a/drivers/scsi/bnx2i/bnx2i_iscsi.c
+++ b/drivers/scsi/bnx2i/bnx2i_iscsi.c
@@ -915,12 +915,12 @@ void bnx2i_free_hba(struct bnx2i_hba *hba)
 	INIT_LIST_HEAD(&hba->ep_ofld_list);
 	INIT_LIST_HEAD(&hba->ep_active_list);
 	INIT_LIST_HEAD(&hba->ep_destroy_list);
-	pci_dev_put(hba->pcidev);
 
 	if (hba->regview) {
 		pci_iounmap(hba->pcidev, hba->regview);
 		hba->regview = NULL;
 	}
+	pci_dev_put(hba->pcidev);
 	bnx2i_free_mp_bdt(hba);
 	bnx2i_release_free_cid_que(hba);
 	iscsi_host_free(shost);
-- 
2.20.1

[PATCH AUTOSEL 4.4 170/174] scsi: target: core: Fix a pr_debug() argument

[Sasha Levin]

From: Bart Van Assche <bvanassche@acm.org>

[ Upstream commit c941e0d172605731de9b4628bd4146d35cf2e7d6 ]

Print the string for which conversion failed instead of printing the
function name twice.

Fixes: 2650d71e244f ("target: move transport ID handling to the core")
Cc: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20191107215525.64415-1-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/target/target_core_fabric_lib.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/target/target_core_fabric_lib.c b/drivers/target/target_core_fabric_lib.c
index cb6497ce4b61..6e75095af681 100644
--- a/drivers/target/target_core_fabric_lib.c
+++ b/drivers/target/target_core_fabric_lib.c
@@ -130,7 +130,7 @@ static int srp_get_pr_transport_id(
 	memset(buf + 8, 0, leading_zero_bytes);
 	rc = hex2bin(buf + 8 + leading_zero_bytes, p, count);
 	if (rc < 0) {
-		pr_debug("hex2bin failed for %s: %d\n", __func__, rc);
+		pr_debug("hex2bin failed for %s: %d\n", p, rc);
 		return rc;
 	}
 
-- 
2.20.1